Gigaset C610/610AIP / Australia / A31008-M2312-C401-1-7643 / title-AB.fm / 4/18/11
Congratulations
By purchasing a Gigaset, you have chosen a brand that is fully committed
to sustainability. This product’s packaging is eco-friendly!
To learn more, visit www.gigaset.com.
Gigaset C610/610AIP / Australia / A31008-M2312-C401-1-7643 / title-AB.fm / 4/18/11
Gigaset C610/610AIP / Australia / A31008-M2312-C401-1-7643 / security_1pg.fm / 4/18/11
Safety precautions
Warning:
Read the safety precautions and the user guide before use.
Explain their content and the potential hazards associated with using the telephone to your children.
> Use only the power adapter supplied, as indicated on the rear of the base.
Use only the cables supplied for fixed line and LAN connection and connect these to the intended port only.
> Use only rechargeable batteries that correspond to the specification (see enclosed CD), as this could otherwise result in significant health risks and personal injury.
> Insert rechargeable batteries with the correct polarity and use them in accordance with the user guide
(polarity symbols are displayed in or on the handset battery compartment).
> Using your telephone may affect nearby medical equipment. Be aware of the technical conditions in your
>
>
>
>
>
>
>
>
>
>
>
particular environment, e.g., doctor's surgery.
If you use a medical device (e.g. a pacemaker), please contact the device manufacturer. They will be able to
advise you regarding the susceptibility of the device to external sources of high frequency energy. Please
refer to the "Appendix" chapter in the long user guide (see enclosed CD) for the specifications of this Gigaset
product.
Do not hold the rear of the handset to your ear when it is ringing or when speaker mode is activated. Otherwise you risk serious and permanent damage to your hearing.
Your Gigaset is compatible with the majority of digital hearing aids on the market. However, perfect function with all hearing aids cannot be guaranteed.
The handset may cause interference in analogue hearing aids (humming or whistling) or cause them to
overload. If you require assistance, please contact the hearing aid supplier.
Do not install the base and charger in bathrooms or shower rooms. The base and charger are not splashproof.
Do not use the phone in environments with a potential explosion hazard, e.g., paint shops.
The charger and base are designed for use in dry rooms in a temperature range of +5°C to +45°C.
Never expose the telephone to heat sources, direct sunlight or other electrical appliances.
Protect your Gigaset from moisture, dust, corrosive liquids and fumes.
If you give your Gigaset to a third party, make sure that you also give them the user guide.
Remove faulty bases from use or have them repaired by our Service, as these could interfere with other wireless services.
Please note that only terminals that are operated in-house (inside buildings) may be connected to the analogue TAE connection.
All electrical and electronic products should be disposed of separately from general household waste using
designated local authority sites.
If a product displays this symbol of a crossed-out rubbish bin, the product is subject to
European Directive 2002/96/EC.
Correct disposal and separate collection of used equipment will help to prevent potential negative consequences for the environment and human health. They are a prerequisite for the re-use and recycling of used electrical and electronic equipment.
For further information on disposing of your used equipment, please contact your local
authority, your refuse collection service or the dealer you purchased the product from.
Batteries should not be disposed of in general household waste. Observe the local waste disposal regulations, details of which can be obtained from your local authority or the dealer you purchased the product
from.
Warning:
> Not all of the functions described in this user guide are available in all countries.
> The device cannot be used in the event of a power failure. It is also not possible to transmit emergency
Version 5, 23.09.2008
calls.
> When the keypad lock is active, you cannot call emergency numbers.
1
Gigaset C610/610AIP / Australia / A31008-M2312-C401-1-7643 / Pack_Content_1pg.fm / 4/18/11
Package contents
1
5
2
3
6
7
4
8
11
Version 5, 23.09.2008
9
10
1
Gigaset C610 IP or C610A IP base
2
Power adapter for connecting the base to the mains power supply
3
Phone cord (flattened) for connecting the base to the analogue fixed line network
4
Ethernet (LAN) cable for connecting the base to the router (LAN/Internet)
5
Gigaset C610H handset
6
Two batteries for the handset (uncharged)
7
Battery cover for the handset
8
Belt clip for the handset
9
Handset charger
10
Power adapter for connecting the charger to the mains power supply
11
This quick guide and CD with installation wizard for your telephone, licence texts, warranty
agreement, links to the long user guide and to key websites.
If the firmware for your base is updated, the user guide will also be updated and made
available for download on the Internet at www.gigaset.com.
2
Gigaset C610/610AIP / Australia / A31008-M2312-C401-1-7643 / overview_handset_1pg.fm / 4/18/11
Keys and functions on the handset
A
B
d
c
p
f
a
*
#
S
Version 5, 23.09.2008
h
Display keys:
Start function displayed to the left or right of the
bottom display line
Speaker key:
Switch between earpiece and speaker mode
(key lights up)
Talk key:
Answer a call;
after entering number: start dialling
Control key:
Open menu (press right);
open directory (press down arrow);
open list of online directories (press and hold down
arrow); scroll through menus (press up/down);
navigate in text
Message key:
Open calls and messages lists;
flashing: new call, new message/firmware
End call key, on/off key:
End call, cancel function (press briefly);
return to idle status (press and hold);
switch handset on/off (press and hold)
Fast access key (press and hold):
Listen to messages on the network mailbox or on
the integrated answering machine
* key: Ringer on/off (press and hold)
# key: Keypad lock on/off (press and hold)
Recall/pause key (fixed line)
Mute key: Microphone muting
3
Gigaset C610/610AIP / Australia / A31008-M2312-C401-1-7643 / connect_overview.fm / 4/18/11
Connection overview
6
5
3
1
4
Version 5, 23.09.2008
2
1
Preparing the handset: inserting the batteries
2
Connecting the charger to the mains power supply and charging the batteries
3
Connecting the phone cord and power lead to the base
4
Connecting the base to the fixed line network and the mains power supply
5
Connecting the base to the router in order to connect the base to the Internet
(connection via router and modem or via router with integrated modem)
6
Connecting the PC to the LAN (optional) – for advanced configuration of the Gigaset C610/
C610A IP base
4
Gigaset C610/610AIP / Australia / A31008-M2312-C401-1-7643 / install_3pg.fm / 4/18/11
Preparing the handset
1
Inserting the supplied batteries and closing the battery cover
> Check the polarity when inserting the batteries
(see symbols in or on the battery compartment).
> Use only the rechargeable batteries recommended.
Once the batteries have been inserted, the handset
switches on automatically.
> First insert the tab on the top of the
battery cover in the recess on the
housing A .
A
> Then press the cover until it clicks
B
into place B .
> The display is protected by a plastic film. Please remove the protective film!
2
Connecting the charger and charging the batteries
> Observe the sequence (A, B)!
> Place the handset in
the charger and wait
until the batteries
are fully charged
(approx. 10 hours).
B
10 h
A
> Do not put the handset back in the
charger until the batteries are fully
discharged through use.
> After the first battery charge and
discharge, you may place your handset
in the charger after every call.
Version 5, 23.09.2008
> The battery charging status is displayed
in the idle display: = e V U
(empty to full).
5
Gigaset C610/610AIP / Australia / A31008-M2312-C401-1-7643 / install_3pg.fm / 4/18/11
Connecting the base
3
Connecting the phone cord and power lead to the base
A
Insert the (flattened) phone cord into
the lower connection socket at the rear
of the base.
B
Insert the power lead of the power
adapter into the upper connection
socket at the rear of the base.
C
Insert both cables into their respective
cable recesses.
B
A
C
Use only the supplied phone cord and the
supplied power adapter.
4
Connecting the base to the fixed line network
and mains power supply
A
Insert the phone cord into the
fixed line network connection
socket.
B
Then insert the power adapter
into the mains socket.
B
A
Keep the power adapter plugged in at
all times for operation, as the phone
does not work without a mains
connection.
You can now use your phone to make calls via the fixed line network:
Enter the number using the handset, and then press the talk key c.
Version 5, 23.09.2008
The integrated answering machine Answer Mach. 1 starts in answer and record mode.
6
Gigaset C610/610AIP / Australia / A31008-M2312-C401-1-7643 / install_3pg.fm / 4/18/11
Connecting the base
5
Connecting the base to the router (Internet)
A
Connect one Ethernet cable plug to
the LAN socket at the side of the base.
B
Insert the second Ethernet cable plug
into a LAN socket on the router.
B
A
Use the Ethernet cable supplied.
As soon as the cable connecting the phone and router is
plugged in and the router is switched on, the key lights up
on the front of the base (paging key).
Data protection notice: Further information about
saving Gigaset.net service data can be found at
www.gigaset.net/privacy-policy.
6
Connecting the PC to the router (optional)
You can change the settings on the phone's base using a PC connected to your phone via the
router.
Version 5, 23.09.2008
> Connect the PC network connection to a free LAN socket on your router.
The procedure below requires that your phone is automatically assigned an IP address by the
router (i.e. DHCP is enabled on router and phone).
In exceptional cases (e.g. if DHCP is not enabled on the router) you will have to assign a static
IP address to the base for LAN access. You must enter this IP address on the handset before
carrying out the following steps. Further information on this can be found in the long user guide
(see enclosed CD).
The following handset menu can be used to make the entry:
v (Press right on the control key) ¢ Ï ¢ System ¢ Local Network ¢ (enter system PIN
if required)
7
Gigaset C610/610AIP / Australia / A31008-M2312-C401-1-7643 / configuration_10pg.fm / 4/18/11
Configuring the VoIP connection
Instead of using the following procedure, you can also enter the VoIP access data and the assignment of the VoIP connection as send and receive connection using your PC (steps 7 to 12 ):
> Launch the web browser on your PC.
> Enter the URL www.gigaset-config.com in the address field of the web browser and press the
return key.
You are connected to your base's Web configurator. To log in to the Web configurator you will
need the system PIN for the telephone (default setting: 0000).
A description of the Web configurator can be found in the long user guide (see enclosed CD) and
in the Web configurator online help document.
Prerequisite for the following steps:
Before you can use VoIP to phone any other subscribers on the Internet, the fixed line network or
the mobile phone network, you need a VoIP account.
> Set up a VoIP account with a VoIP provider.
> Have your VoIP account data you received from your VoIP provider to hand.
You will need:
> Your registration name (login ID), your password and, if applicable (provider-dependent), a user
name (often this is your VoIP phone number).
Or
> Your personal auto-configuration code (activation code), if your provider supports "automatic
Version 5, 23.09.2008
configuration".
8
Gigaset C610/610AIP / Australia / A31008-M2312-C401-1-7643 / configuration_10pg.fm / 4/18/11
Configuring the VoIP connection
7
Starting the configuration process
When your handset is sufficiently charged (approx. 20 minutes after you have placed it in the
charger), the message key f on the handset flashes.
> Press the message key f on the handset.
If "New firmware available" is shown in the display, updated firmware is already available for
your phone. Press the right-hand display key §Yes§. The new firmware is loaded. This takes approx.
6 minutes. The message key f will now flash again.
> Press the message key f to start configuration.
8
Starting the VoIP wizard
IP Wizard
IP Wizard
?
Ð
This wizard helps
you to configure an
Start IP
IP account and
installation wizard?
register it with your
V
provider so you can -
No
Yes
> Press the key below §Yes§ on the display
(= right display key).
OK
> Press the bottom of the control key s
to scroll down.
Version 5, 23.09.2008
> Press the §OK§ display key to continue.
If the connection assistant does not start correctly, or if you cancel the connection assistant,
you can start it via the following menu on the handset:
p (press right) ¢ Ï ¢ Telephony ¢ VoIP Wizard
9
Gigaset C610/610AIP / Australia / A31008-M2312-C401-1-7643 / configuration_10pg.fm / 4/18/11
Configuring the VoIP connection
Select IP Account
´
IP 1
´
IP 2
´
IP 3
A list of all possible IP connections is shown in the display
(IP 1 to IP 6). VoIP connections that are already configured
are marked with ³.
´
IP 4
IP 5
V
Back
´
OK
> If necessary, press down on the control key s to select
a connection.
> Press the §OK§ display key to continue.
Provided that your phone is set for auto-configuration (default setting), you will see the following
display. Otherwise, for more information, see 10 .
If you have received a registration name/password
and, if applicable, a user
name:
> Press the key below §No§
on the display screen.
> For more information,
see
10
.
If you have received an
auto-configuration code:
IP Wizard
?
> Press the key below §Yes§
Do you have a
on the display screen.
code for auto
> For more information,
see
configuration?
No
9
.
Yes
If your phone cannot establish a connection to the Internet, the message Internet connection not
available is displayed.
> Press the left display key §Info§ to display information about the possible causes of errors.
> Press the right display key §OK§ to end the VoIP wizard and start the connection assistant
Version 5, 23.09.2008
(step
10
12
).
Gigaset C610/610AIP / Australia / A31008-M2312-C401-1-7643 / configuration_10pg.fm / 4/18/11
Configuring the VoIP connection
9
Entering an auto-configuration code
> Enter your auto-configuration code using the keypad
IP Wizard
Activation code for
> Press the right-hand display key §OK§.
autoconfiguration:
All data required for VoIP telephony is loaded directly from
the Internet to your phone.
Following successful download, Your IP account is registered with your provider. is shown in the display.
Proceed as described under 12 .
<C
10
(max. 32 characters).
OK
Selecting a provider and loading provider data to the base
Select your country
Select a Provider
Country 1
Provider 1
Country 2
Provider 2
Country 3
Provider 3
Country 4
Provider 4
Country 5
Back
V
Provider 5
OK
p (press down arrow).
Back
V
OK
p (press down arrow).
> Select your country with the control key
> Select your provider with the control key
> Press the display key §OK§.
> Press the display key §OK§.
Version 5, 23.09.2008
The general access data for your VoIP provider will be downloaded and saved on the phone.
11
Gigaset C610/610AIP / Australia / A31008-M2312-C401-1-7643 / configuration_10pg.fm / 4/18/11
Configuring the VoIP connection
If your provider is not in the list, you must cancel the VoIP wizard:
> Press and hold the end call key a to return your handset to idle status.
> Carry out the configuration and the assignment of the send and receive connection using the
Web configurator. You will find more detailed information about this in the user guide on the
enclosed CD.
11
Entering personal VoIP account data
> To switch between upper and lower case and digits, press the # key (several times if necessary).
> Characters entered incorrectly can be deleted using the left display key X. The character
to the left of the cursor is deleted.
> You can navigate within the input field using the control key p (press right/left).
Provider Data
Provider Data
User ID:
Password:
Abc
<C
OK
> Using the number keys, enter the authentication name (user identification) that
you received from your VoIP provider.
This entry is case-sensitive.
Abc
<C
OK
> Using the number keys, enter the authentication password that you received from
your provider. This entry is case-sensitive.
> Press the right display key §OK§.
Version 5, 23.09.2008
> Press the right display key §OK§.
Depending on your provider, you may be prompted to enter another name (User name). Enter it
as described above.
If the User name is identical to the User ID, you only need to press the right display key §OK§.
12
Gigaset C610/610AIP / Australia / A31008-M2312-C401-1-7643 / configuration_10pg.fm / 4/18/11
Assigning the send/receive connection
Once you have entered all the VoIP data fully and correctly, the message "Your IP account is registered with your provider." will appear in the display after a short time. The VoIP wizard is closed.
12
Starting the connection assistant
To call other parties using the newly configured VoIP connection (e.g. IP 1), you must assign the
connection to one or more of the registered handsets as a send connection.
Default assignment: The VoIP connection is assigned to every registered handset and to the integrated answering machine as a receive connection (incoming calls can be received). It is not
assigned to any handset as a send connection.
The following is shown in the display:
a.
Connection Assist.
> Press the display key §Yes§ if you wish to change
?
the setting for the send and receive connections of the handset with the internal name
INT1.
Assign connections to handset
> Press the display key §No§ if you do not wish to
INT1?
No
Yes
b.
Rec. Connections
INT1
Ð
receives calls for
change the setting for this handset.
The list of receive connections currently assigned is
displayed.
Press down on the control key s to scroll
through the list if necessary.
Fixed Line: 4560123
> Press the display key §Change§ if you wish to
IP 1: 12345602
change the receive connection setting.
Gigaset.net: 12345#9
Change
OK
> Press the display key §OK§ if you do not wish to
Version 5, 23.09.2008
change the setting. The following steps are
skipped. Continue from e.
13
Gigaset C610/610AIP / Australia / A31008-M2312-C401-1-7643 / configuration_10pg.fm / 4/18/11
Assigning the send/receive connection
c.
INT 1
If no calls to the VoIP connection IP 1 are to be signalled on the handset:
> Press right on the control key v to set to No.
Receive calls for
IP 1:
< Yes
>
Receive calls for
Gigaset.net:
Back
Save
d.
> Press down on the control key s to switch to
INT 1
the next connection. Select either Yes or No as
described above.
IP 1:
Yes
Receive calls for
> Repeat the steps for each connection.
Gigaset.net:
< Yes
Back
> Press the display key §Save§ once you have fin>
ished configuring the settings for the handset.
Save
Version 5, 23.09.2008
The updated list of receive connections is displayed one more time for you to check. Press the
display key §OK§ to confirm the assignment.
14
Gigaset C610/610AIP / Australia / A31008-M2312-C401-1-7643 / configuration_10pg.fm / 4/18/11
Assigning the send/receive connection
e.
Send Connections
Ð
The send connection currently set for the handset
is displayed: Fixed Line.
INT1
sends calls with
> Press the display key §OK§ if you do not wish to
Fixed Line:
change the setting. Skip the following step.
4560123
Change
OK
> To change the setting, press the display key
§Change§.
f.
Which connection/phone number should the
handset use to make a call:
INT 1
> Press right on the control key v repeatedly,
Connection for
until the required connection is displayed (in
the example, IP 1).
outgoing calls:
< IP 1
Back
>
Save
> Press the display key §Save§ to save the settings.
Instead of a fixed connection, you can also select Sel. at each call. Each time you make a call, you
can then select the connection you wish to use.
You can go on to initially start the connection assistant for each additional handset registered to
the base. The following is displayed in sequence for each handset:
Assign connections to handset xxx?
Version 5, 23.09.2008
> Carry out steps a. to f. (see above) for each registered handset.
15
Gigaset C610/610AIP / Australia / A31008-M2312-C401-1-7643 / configuration_10pg.fm / 4/18/11
Assigning the send/receive connection
On the Gigaset C610A IP:
You can then start the connection assistant for the three Gigaset answering machines. For each
answering machine, the following will be shown in the display:
Assign connections to answering machine ?
> Carry out steps a. to d. (see above) for the individual answering machines to assign individual
base connections to the answering machines.
Please note:
Each connection may only be assigned to one of the three integrated answering machines as a
receive connection. If you assign a receive connection to an answering machine and this connection is already assigned to another answering machine, the "old" assignment is deleted.
Completing the installation
After successfully configuring the settings, Connection assignment complete is displayed briefly.
Afterwards, the handset returns to idle status (an example of the display in idle status):
i
V
07:15
INT 1
Calls
14 Oct
SMS
The following are displayed:
Reception between the base and the handset:
good to low: Ð i Ñ Ò, no reception: ¼ (red)
Charge status of the batteries:
y y { { (Empty to full)
y Flashes red: batteries almost empty
xy x{ x{ (Charging)
INT 1: Internal name of the handset
Version 5, 23.09.2008
You can configure five additional VoIP connections (VoIP phone numbers) on
your Gigaset. The long user guide for your phone (see enclosed CD) contains
detailed information on setting up the device, configuring new connections and
operating the phone, as well as possible solutions to frequently asked questions
and common problems.
To ensure that you can always be reached via the Internet, the router must be permanently connected to the Internet.
16
Gigaset C610/610AIP / Australia / A31008-M2312-C401-1-7643 / configuration_10pg.fm / 4/18/11
Gigaset.net directory entry
Entering your name in the Gigaset.net directory
Gigaset.net* is a VoIP service provided by Gigaset Communications GmbH, which you can use to
make free calls to other Gigaset VoIP users.
The first time you open the Gigaset.net directory, complete the following steps and an entry will
be created in the Gigaset.net directory for you:
> Press and hold the control key p.
> Press down on the control key p repeatedly until Gigaset.net is selected.
> Press the display key §OK§.
A connection to the Gigaset.net online directory is established. You will see the following display:
Own Details
> Using the number keys, enter the name that you
Your Gigaset.net
would like to be listed under in the Gigaset.net directory**.
nickname:
Gi
abc
<C
> Press the right display key §Save§.
Save
Version 5, 23.09.2008
If an entry already exists with this name, the message "Nickname already exists. Please change."
will appear. You will be prompted to enter a name again.
* Exclusion of liability
Gigaset.net is a voluntary service provided by Gigaset Communications GmbH with no liability or guarantee for
the availability of the network and the service.
** Data protection notice
Nicknames are stored on a central Gigaset server and displayed in the Gigaset.net directory. You can receive
calls from other users of the Gigaset.net service under this nickname. By entering your data, you agree to
having your data saved. If you do not wish this to happen, you can cancel the operation by pressing the right
display key §Save§ without making an entry.
Further information about saving Gigaset.net service data can be found at www.gigaset.net/privacy-policy.
17
Gigaset C610/610AIP / Australia / A31008-M2312-C401-1-7643 / telephony_1pg.fm / 4/18/11
Making calls / operating the answering machine
Making calls
> Enter a phone number using your handset's number keys.
Please note that, even with local calls, you must always dial the area code for calls via VoIP
(provider-dependent).
> Press the talk key c.
> If you have assigned the handset a fixed send connection (default assignment: fixed line connection), the number will be dialled via this send connection.
Or
> If you have assigned the handset Sel. at each call, the list of connections for your phone will be
displayed (Fixed Line, IP 1 etc.).
> Select a send connection and press the talk key c; the number will be dialled via the selected
send connection.
Operating the Gigaset C610A IP answering machine
Switching the answering machine on/off
> Press right on the control key p to open the menu.
> Press down on the control key p to select the Ì symbol and then press the display key §OK§.
> Press down on the control key p to select the Activation function and then press the display
key §OK§.
If you have assigned multiple integrated answering machines to the phone's connections, a list of
answering machines is displayed, to which at least one phone connection is assigned as a receive
connection. An answering machine is activated if it is marked with μ. Use the control key p to
select an answering machine and press the display key §OK§.
> Use the control key p (press right/left) to select On or Off; this activates or deactivates answer
and record mode (default setting) for the answering machine.
> Press the display key §Save§.
Listening to messages
> Press the message key f. Select one of the answering machine lists (Answer Mach. 1, Answer
Mach. 2, Answer Mach. 3) using the control key p (press down) and press the display key §OK§.
Version 5, 23.09.2008
Message playback starts.
18
Gigaset C610/610AIP / Australia / A31008-M2312-C401-1-7643 / CC_1pg.fm / 4/18/11
Customer service & product warranty
Australia and New Zealand
IMPORTANT
Please retain your sales receipt as proof of the date of purchase.
Customer Service
If you require assistance in operating this product please contact us
AUS: 1300 780 878 or by e-mail at the Customer Care section of our website at
www.gigaset.com/au
NZ: 0800 780 878 or by e-mail at the Customer Care section of our website at
www.gigaset.com/au
If you are trying to access a Network Service and require assistance specifically related to the network service or would like to subscribe to the service, contact your service provider.
Product Warranty
Subject to the conditions below, this product, excluding battery and accessory devices, is guaranteed against any defect in materials or workmanship under conditions of normal use for a period
of 12 months from date of purchase.
The benefits conferred by this warranty are in addition to other warranties and remedies that are
implied under the Australian Trade Practices Act and similar Country, State and Territory laws (Statutory Rights).
Subject to your Statutory Rights, the goods will not be eligible for service under this warranty if:
1. Proof of purchase cannot be provided;
2. The defect was caused by an accident, misuse, abuse, improper installation or operation, vermin
infestation, lack of reasonable care, unauthorised modification, loss of parts, tampering or attempted repair by a person not authorised by Gigaset; or
3. The product has been damaged by lightning or a mains power surge.
4. The Phone was not imported into Australia by Gigaset Communications GmbH.
To obtain service during the terms of this warranty call the Information Line on
AUS: 1300 780 878 or by e-mail at the Customer Care section of our website at
www.gigaset.com/au
NZ: 0800 780 878
Version 5, 23.09.2008
If it is necessary to have the product serviced, the Customer Service Representative will inform you
of the product return process.
19
Gigaset C610/610AIP / Australia / A31008-M2312-C401-1-7643 / CC_1pg.fm / 4/18/11
Customer service & product warranty
Please ensure that:
1. You provide proof of purchase;
2. Your product is suitably packaged; and
3. You have included all components from the original purchase.
Subject to your Statutory Rights:
1. Any claim under this warranty is limited to the cost of repair or replacement of the product; and
2. If the goods are found to be in sound working order by the authorised service centre, you may
be charged a fee for service and for any other direct costs associated with having the product
delivered for service.
Replacement or repair services are only offered for products purchased in Australia and New Zealand that bear Gigaset Communications GmbH local registered N Number and Telepermit markings.
Please have your proof of purchase ready when calling.
Version 5, 23.09.2008
IMPORTANT NOTICE:
Under power failure conditions, this telephone may not operate. Please ensure that a
separate telephone, not dependent upon local power, is available for emergency use.
20
Gigaset C610/610AIP / Australia / A31008-M2312-C401-1-7643 / Cover_back.fm / 4/18/11