component testers - Metrix Electronics

COMPONENT TESTERS
Selection Guide
B&K Precision offers a wide range of component testers that can measure and identify values of capacitors, resistors, inductors, diodes, ICs,
and transistors. The measured values of these components can be used for component sorting or circuit trouble shooting.
LCR Meters are versatile instruments as they can measure most common components used in electronic circuitry. Capacitance meters on the
other hand are dedicated to testing capacitors only, and have typically a wider capacitance measurement range. Our transistor testers and meters that measure ESR can be invaluable tools when testing and troubleshooting components “in-circuit”, while logic probes are always used
in-circuit. IC Testers are used to identify and test some analog and digital ICs.
C ate gor y
De s cr ip ti on
Ma x R an ge
B as i c A cc u ra cy
Mode l
P ag e
LCR Meter
20 mF / 200 H / 20 MΩ
1%
875B
51
Universal LCR Meter
20 mF /1 kH / 10 MΩ
0.5%
878B
51
Deluxe Universal LCR Meter with ESR
20 mF /1 kH / 10 MΩ
0.5%
879B
51
Synthesized LCR / ESR Meter with SMD Probe
15.91 mF / 31.83 kH / 20 MΩ
0.2%
885
51
Synthesized LCR / ESR meter with SMD Probe
100kHz test freq.
15.91 mF / 31.83 kH / 20 MΩ
0.2%
886
51
Bench LCR/ESR Meter with Component Tester
15.91 mF /
0.1%
889B
51
Compact Capacitance Meter
20 mF
0.5%
810
52
Dual Display Capacitance Meter
199.99 nF
0.5%
830B
52
Dual Display Capacitance Meter
50 mF
0.5%
890B
52
Component Tester
20 mF/ 20 MΩ
0.5%
815
53
Portable Transistor Tester
---
---
510A
52
Industrial Semiconductor Tester with
Leakage Test
---
---
520C
52
Linear IC Tester
---
---
570A
53
Digital IC Tester
---
---
575A
53
In-Circuit ESR Tester
2200 µF
---
881
53
Digital Logic Probe
20 MHz
---
DP 21
53
Logic Pulser Probe
400 Hz
---
DP 31A
53
Digital Logic Probe
50 MHz
---
DP 52
53
LCR
Capacitance
Component Tester
Transistor
IC
ESR
Logic Probes
50
Metrix Electronics Ltd Tel: +44 (0)845 034 3234 Email: sales@metrix-electronics.com
COMPONENT TESTERS
LCR Meters
L CR me te rs measure inductance, capacitance, and resistance and are primarily
used for component testing in manufacturing quality control or circuit design. They
also find use in many other applications
such as characterization of cable assemblies, materials and chemicals.
Model 889B
Model 885
Mo de ls 8 8 5 & 88 6 are 10,000 count handheld meters equipped with four wire termi-
Mo de l 8 8 9B is a 10,000 count bench meter
that uses a four wire interface connection
nal connections to facilitate more accurate
measurements.
designed for accurate measurements.
Features & Benefits
Features & Benefits
■ Measurement parameters: ACV, DCV,
■ Measurement parameters: Z, L, C, DCR,
ESR, D, Q, and Ø
Model 879B
Z,L, C, DCR, ESR, D, Q, and Ø
■ LCR test conditions: 100 Hz, 120 Hz,
■ Test conditions: 100 Hz, 120 Hz, 1 kHz,
1 kHz, 10 kHz, 100 kHz, 200 kHz , 1 Vrms,
Mo de ls 8 7 8B & 8 79 B are 40,000 count
10 kHz, 100 kHz (model 886), 1 Vrms,
hand-held meters designed for accurate and
fast measurements.
0.25 Vrms, 0.05 Vrms, 1 VDC (DCR
0.25 Vrms, 0.05 Vrms
mode only)
■ 0.2% basic accuracy
■ Measures DCV to 600 V and ACV to
Features & Benefits
■ Dual LCD display
■ 40,000 count primary and 10,000 count
■ SMD surface mount tweezer probe
secondary display (backlight with 879B)
600 Vrms @ 40 ~ 1 kHz
included
■ Measures DCA to 2 A and ACA to
2 Arms @ 40 ~ 1 kHz
■ L/C/R/Z primary measurements (Z with
■ 0.1% basic accuracy
879B)
■ Diode and continuity measurements
■ D/Q/θ/ESR secondary measurements
(θ/ESR with 879B)
■ 0.5% basic accuracy
Mo de l 8 7 5B is a manual range, hand-held
20,000 count LCR meter that is reliable and
■ Dual LCD display
easy to use.
■ BNC to Kelvin Clip probe included
■ USB (Virtual COM) interface
■ USB (Virtual COM) interface
■ Measures D (dissipation factor)
■ SCPI compliant commands for remote
■ Zeroing adjust knob
communication
Te s t S i g n a l
Fr e q u e n c y
Le v el
I nd u ct an ce
Mea su ra b le
R an ge
875B◊
120 Hz, 1 kHz
Approximatly 0.5 Vrms
20 uH - 200 H
40 pF - 20 mF
878B
120 Hz, 1 kHz
Approximatly 0.6 Vrms
20 uH - 1000 H
40 pF -20 mF
879B
100 Hz, 120 Hz, 1 kHz.
10 kHz
Approximatly 0.6 Vrms
2 uH - 1000 H
4 pF -20 mF
885
100 Hz, 120 Hz, 1 kHz,
10 kHz
1 Vrms, 0.25 Vrms, 50 mVrms,
1 VDC (DCR only)
31.83 kH - 1.591 uH
0.159 pF - 15.91 mF
886
100 Hz, 120 Hz, 1 kHz,
10 kHz, 100 kHz
1 Vrms, 0.25 Vrms, 50 mVrms,
1 VDC (DCR only)
31.83 kH - 0.159 uH
0.159 pF - 15.91 mF
889B
100 Hz, 120 Hz, 1 kHz,
10 kHz, 100 kHz, 200 kHz
1 Vrms, 0.25 Vrms, 50 mVrms,
1 VDC (DCR only)
0.079 uH - 31.83 kH
0.079 pF - 15.91 mF
S p ec ifi ca ti ons
3
C ap a ci ta nc e
Me asu ra b le
R a nge
Re sista nc e
M ea s ur a bl e
R an ge
Weigh t
Dim en sions
(W x H x D)
0.2 Ω - 20 MΩ
14.12 oz
(400 g)
3.47” x 6.97” x 1.58”
(88 x 177 x 40) mm
0.4 Ω - 10 MΩ
11.64 oz
(330 g)
3.54” x 7.48” x 1.61”
(90 x 190 x 41) mm
0.1 Ω - 20 MΩ
1.1 lbs
(470 g)
3.4” x 6.9” x 1.9”
(86 x 175 x48) mm
0.1 Ω - 20 MΩ
10 lbs
(4.5 kg)
8.7” x 11.8” x 5.9”
(220 x 300 x 150) mm
nty
T hree
rra
a r wa
ye
◊=
51
Metrix Electronics Ltd Tel: +44 (0)845 034 3234 Email: sales@metrix-electronics.com
COMPONENT TESTERS
Capacitance Meters & Transistor Testers
Capacitance Meters
The 830B and 890B capacitance meters
feature a large 4 1/2 digit LCD with dual display, 11,000 counts resolution, and 9 automatically selected ranges with full scale
value from 1.0 pF to 199.99 mF (50 mF
model 890B). The meter’s dedicated chip
and microprocessor support programmable
high/low limits or pre-programmed standard capacitor tolerances, making it ideal
for inspection, sorting capacitors and testing capacitors against standard tolerances.
The 830B comes with software and interface cable for PC based data logging and
monitoring. Additionally, these meters
meet the latest international safety standards.
3
Model 810C
Th e 8 1 0C is a compact manual ranging
capacitance meter, designed for accurate
cost affective measurement of capacitive
components. It features fused direct-plug-in
test sockets and test lead jacks. Also
provided a zero adjustment knob to "zero"
test lead capacitance.
nty
T hree
rra
a r wa
ye
Model 890B
Features & Benefits
■ Auto ranging
■ Dual display simultaneously displays
value and deviation from selected
tolerance
Sp ec ific at ion s
Te s t F r e q u e n c i e s
Te s t L e v e l
M easu r ab le
R a nge
Weight
D imensi ons
(W x H x D)
810C
820 Hz, 82 Hz, 8.2 Hz
<3.5 V
20 pF - 20 mF
11.3 oz
(20 g)
3” x 6.75” x 2.2”
(76 x 171 x 57) mm
<3 V
10 pF -50 mF
<3 V
10 pF -199.99 mF
11.3 oz
(20 g)
3.42” x 7.24” x 1.61”
(87 x 184 x 41) mm
■ Sort on preset tolerance of 1, 5, 10%
■ Program unique values to sort for
specific circuit applications
830B
890B
200 Hz, 1.1 kHz, 7.7 kHz,
38 kHz, 166 kHz
Transistor Testers
Transistor testers model 520C and 510A are
designed for in circuit and out of circuit
transistor testing. They were designed for a
minimum amount of control manipulation
and setup, allowing for rapid testing of
most devices. The model 520C also has a
logarithmically scaled meter that identifies
leakage in both Silicon and Germanium devices.
Sp ec ific at ions
L e a k a g e Te s t
Ident ifies
520C
0.1 mA - 5 mA of ICE
leakage
NPN or PNP, FET as N-channel or P-channel
Silicone or germanium transistors in LO drive,
base lead in HI drive all leads of SCR
N/A
NPN or PNP, FET as N-channel or
P-channel FET-gate lead, all leads of
510A
We i g h t
Di me ns ion s
1 lbs
(450 g)
4” x 7.5” x 2”
(102 x 191 x 51) mm
Model 510A
52
Metrix Electronics Ltd Tel: +44 (0)845 034 3234 Email: sales@metrix-electronics.com
COMPONENT TESTERS
IC, ESR & Logic Probe Testers
Model 570A
IC Testers
The 570A interfaces with analog ICs and the
575A with digital ICs. Both versions emulate passive circuitry around the IC under
test to ensure that a comprehensive test
takes place. High integrity verification offers
guaranteed levels of reliability in the results. Conditional and unconditional loop
testing modes ensure that intermittent
and/or temperature related faults are detected. The units automatically sense the
functionality of the device to be tested and
display a list of possible equivalents for replacement. Unmarked and house-coded ICs
can be identified and tested.
Model 881
Model 815
In-Circuit ESR & DCR Capacitor Tester
Component Tester
The 881 is a portable In-Circuit ESR Meter
that measures the equivalent series resistance of electrolytic capacitors in or out of
circuit and can also be used to measure low
value non-inductive resistors. In-circuit
measurements are dependent on the circuit
design of the capacitor being measured.
The 815 is a handy meter measuring capacitance (0.1 pF to 20 mF) and resistance (0.1
ohm to 20M ohm) and can also test transistors, diodes, SCRs, LEDs and batteries.
Features & Benefits
■ Transistor leakage test
■ Diode and SCR test
Features & Benefits
■ Measures ESR with a range of 0.1 to
■ LED test
■ Battery test
30 Ω
■ Three color front panel chart shows
ESR readings of Good, Fair, and Bad
■ Measures DCR with a range of 0.1 to
Features & Benefits
■ Auto identification mode
■ Conditional/unconditional loop testing
mode
30 Ω
■ 15 mVp-p output test voltage (will not
turn on any solid-state devices)
■ Includes a one-handed tweezers test
■ Functional test unit emulates passive
probe
circuitry to implement a comprehensive
test in a variety of configurations and
Model DP 21
gain settings
■ Displays diagnostic information down
to individual component pins
Logic Probes
For use with TTL and CMOS circuits and ICs
M odel
Des cr ip tio n
DP 21
20 MHz Digital Logic Probe
DP 31A
400 Hz Digital Pulser Probe
DP 52
50 MHz Digital Logic Probe
53
Metrix Electronics Ltd Tel: +44 (0)845 034 3234 Email: sales@metrix-electronics.com