Philips CE131, CE131/00 User manual

Philips CE131, CE131/00 User manual
Register your product and get support at
www.philips.com/welcome
CE131
EN
User manual
3
ES-AR
Manual del usuario
23
PT-BR
Manual do Usuário
51
=+7: Ԛ͂ʹ˫
77
=+&1 Ⴌ߀൱Ҭ
97
8
1 Important
2
3
4
7
18
18
Additional information
19
Detach the front panel
Replace fuse
Remove the unit
19
19
19
Product information
20
Safety
Notice
4
4
Your car audio system
6
9
Introduction
What’s in the box
Overview of the main unit
6
6
7
10 Troubleshooting
Get started
8
Install the car audio
Turn on
Set clock
8
12
12
Listen to radio
13
Tune to a radio station
Store radio stations in memory
Tune to a preset station
13
13
13
6
4
Rear Aux
Reset
21
Play from USB
Insert a card
Play options
Connect external sound source
14
14
14
15
Adjust sound
16
Adjust volume
Mute
Turn Dynamic Bass Boost (DBB) on/off
Turn on/off MAX sound
Select preset equalizer
Switch music listening zone
Other sound settings
16
16
16
16
16
16
16
Adjust system settings
17
Turn beep sound on/off
Select blackout setting
Turn demo mode on/off
Dimmer
Dance
17
17
17
18
18
EN
3
Engl i sh
Contents
1 Important
Caution
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Safety
Read and understand all instructions
before you use your apparatus. If damage is
warranty does not apply.
This apparatus is designed for negative
ground (earth) 12 V DC operation only.
!!
a safe and comfortable level.
Improper fuses can cause damage or
"
consult a professional.
Use only the supplied mounting hardware
for a safe and secure installation.
!#
control batteries to rain or water.
Never insert objects into the ventilation
slots or other openings on the apparatus.
$
damp cloth. Never use substances such as
on the apparatus.
Never place any objects other than discs
into the apparatus.
%!!&
!
anti-static sprays intended for discs.
Visible and invisible laser radiation when
open. Avoid exposure to beam.
Risk of damage to the apparatus screen!
%!
with any object.
4
EN
The apparatus shall not be exposed to
dripping or splashing.
Do not place any sources of danger on the
candles).
Notice
The making of unauthorized copies of copy
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
Windows Media and the Windows logo
Microsoft Corporation in the United States
and/or other countries.
Recycling
Your product is designed and manufactured
which can be recycled and reused.
*
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
Engl i sh
When you see the crossed-out wheel bin
product is covered by the European Directive
2002/96/EC:
2011 © Koninklijke Philips Electronics N.V. All
rights reserved.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
+
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
Your product contains batteries covered by the
,;!<==>?>>?,$
be disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment and
human health.
This product complies with the radio
interference requirements of the European
Community.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
@
#F
polystyrene foam (buffer) and polyethylene
!F
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
#
equipment.
EN
5
i User manual
2 Your car audio
system
j Quick start guide
a
$
GH
G
at www.philips.com/welcome.
Introduction
b
c
d
"J
your drive while listening to:
FM or AM (MW) radio
Audio from USB devices
Audio from SD/SDHC card
Audio from other external devices
e
g
f
The unit supports the following media format:
h
What’s in the box
Check and identify the contents of your
package:
a Main unit (with a sleeve)
b Front panel
c Trim plate
d Carrying case
e ISO male connector
f Rubber cushion
g Screw x 1 pc
h Disassembly tools x 2 pcs
6
EN
i
j
a
b
c
d e
p
f
o n
r
a SOURCE
m
l
k
q
Turn the unit on or off.
$
b MENU
Mute or unmute sound.
Rotate to adjust volume.
Select audio source.
Access system menu.
c
d
Return to previous menu.
/
g
ji h
Engl i sh
Overview of the main unit
e ZONE
/
Select tuner band.
Select MP3/WMA folder.
Switch music listening zone.
EN
7
f MP3 LINK
Connect external audio device.
3 Get started
g
Use the controls only as stated in this user manual.
h
i
Caution
Unlock the panel.
USB socket.
6281'
Turn on or off Maximizing volume.
View clock.
j DBB
Turn on or off Dynamic Bass Boost
(DBB) sound.
Access to tuner auto store.
Always follow the instructions in this chapter in
sequence.
[G
model and serial number of your apparatus. The
model number and serial number are on the
bottom of your apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
k
Start play.
Pause or resume play.
Select preset radio station No.6.
l REP / SHUF
Access to repeat play.
Access to random play.
Select preset radio station No.3/4.
m
These instructions are for a typical installation.
\!
make the corresponding adjustment. If you have
your Philips car audio dealer.
/
n
Search for track/folder.
Select preset radio station No.1/2.
/
Tune for radio station.
Skip/search for track.
Fast forward/backward playback.
p EQ / AUDIO
Select equalizer (EQ) setting.
Access audio setting menu.
q RESET
Restore default settings.
r SD card slot
EN
Caution
This unit is designed for negative ground (earth) 12 V
DC operation only.
Always install this unit in the car dashboard. Other
o DISP
Display current status.
Select the dimmer high or low.
8
Install the car audio
locations can be dangerous as the rear of the unit heats
up during use.
[email protected]
the ignition is off.
Ensure that you connect the yellow and red power
supply leads after all other leads are connected.
Ensure that all loose leads are insulated with electrical
tape.
Ensure that the leads do not get caught under screws
orin parts that will move (e.g. seat rail).
Ensure that all ground (earth) leads are run to a
common ground (earth) point.
Use only the supplied mounting hardware for a safe
and secure installation.
["
Note on the power supply lead (yellow)
When you connect other devices to this
circuit is higher than the total fuse value of
all the connected devices.
Note
Engl i sh
Risk of danger! Please consult a professional to perform
the below steps!
Notes on speaker connection
Never connect speaker wires to the metal
body or chassis of the car.
Never connect speaker wires with stripes
to one another.
Connect wires: ISO male connectors
Caution
Ensure that all loose leads are insulated with electrical
tape.
1
e
Green/black
strip
White/black
strip
Gray/black
strip
Purple/black
strip
Red
f
Blue
g
Blue/white
h
i
Black
Yellow
Note
Consult a professional to connect CE131 as instructed
below.
1
2
Connect the supplied male connector to
the unit.
2
3
4
Left speaker (Rear)
Left speaker (Front)
Right speaker (Front)
Right speaker (Rear)
Ignition key +12V DC
when ON/ACC
Motor/electric antenna
relay control lead
*
lead
Ground
To the +12V car
battery which is
energized at all times
Check the car’s wiring carefully and
connect them to the supplied male
connector.
EN
9
3
$
If you disconnect the car battery in
a car that has an on-board drive or
!
may lose its memory.
[
!J
bare wires do not touch each other.
f
h
g
L
Front
Rear
R
2
Ensure that car dashboard opening is
within these measurements:
m
5m
7
Connector
ANTENNA
FRONT LINE OUT
R (Socket)
FRONT LINE OUT L
(Socket)
REAR LINE OUT R
(Socket)
REAR LINE OUT L
(Socket)
OE REMOTE
(Purple)
TEL MUTING (Blue)
8
REAR AUX (Yellow)
1
2
3
4
5
6
Connect to
Antenna
Front right
speaker
Front left
speaker
Rear right
speaker
Rear left
speaker
OE Remote
To cellular
phone system
Aux right/left
Tip
The pin arrangement for the ISO connectors depends
on the type of vehicle you drive. Be sure to make
proper connections to prevent damage to the unit.
Mount into the dashboard
1
If the car does not have an on-board drive
!
negative terminal of the car battery.
10
EN
mm
53mm
183
3
Remove the mounting sleeve with the
supplied disassembly tools.
Install the sleeve into the dashboard and
#!
Engl i sh
4
Note
[#!
3m
53.5 mm
18
m
7
Reconnect the negative terminal of the car
battery.
Attach the front panel
5
6
Place the supplied rubber cushion over the
end of the mounting bolt.
1
Attach the trim plate.
2
Insert the left side of the panel in the
chassis until it is correctly engaged.
3
Press the right side of the panel until it is
locked into place.
Slide the unit into the dashboard until you
hear a click sound.
EN
11
Set clock
1 Press MENU repeatedly until current time
{
2
3
4
5
Rotate
Press
to set hour.
Rotate
Press
to set minute.
Turn on
Set clock format
1
2
Press
.
press and hold
turned off.
until the unit is
3
Press MENU.
Press or repeatedly until [CLOCK
FORMAT] is displayed.
Rotate
to select a setting:
[CLOCK 12H]
[CLOCK 24H]
Select country/region
View clock
Note
+?
the unit can not work properly.
1
Press to turn on the unit.
» [SELECT OPERATING REGION] is
displayed.
2
Rotate
to select an option:
[USA] (United States)
[EUR] (Western Europe)
[RUS] (Russia)
[AUS] (Australia)
[EAS] (Middle East)
[ASI]
*GF
[JAP] (Japan)
[LAT] (Latin America)
3
Press
12
EN
[MAX SOUND
until the clock is displayed.
Press any key to cancel the clock
display.
1
Press MENU repeatedly until [LOCAL] is
displayed.
2
Rotate
Tune to a radio station
1 Press SOURCE repeatedly to select radio
mode.
2
Press ZONE / repeatedly to select
band: [FM1][FM2][FM3][AM1]
[AM2] .
3
Press and hold
or
radio station manually.
to tune to a
» The radio station is broadcast.
» To search for a radio station
or .
to select a setting:
[LOCAL ON] (local on): Only
stations with strong signal can be
broadcast.
[LOCAL OFF] (local off): Stations
with strong and weak signals can be
broadcast.
Store radio stations in
memory
You can store up to 6 stations in each band.
Store stations automatically
Select tuner region
1
[}DBB until
[STORE - - -] is displayed.
You can select suitable country/region of the
radio.
2
Press » The six strongest stations of the
selected band are saved in preset
channel automatically.
1
2
Press SOURCE to select radio mode.
3
Rotate
Press MENU repeatedly until [AREA] is
displayed.
to select:
[USA] (United States)
[EUR] (Western Europe)
[RUS] (Russia)
[AUS] (Australia)
[EAS] (Middle East)
[ASI]
*GF
[JAP] (Japan)
[LAT] (Latin America)
Select tuner sensitivity
To receive more radio stations or only stations
sensitivity.
Store stations manually
1
Tune to a station that you want to store.
(see ‘Tune to a radio station’ on page 13)
2
Press a numeric button for 3 seconds.
» The station is saved in the selected
channel.
Tune to a preset station
1 Press ZONE / to select band.
2 Press the numeric button to select a preset
station.
EN
13
Engl i sh
4 Listen to radio
5 Play audio files
Play from USB
Note
Ensure that the USB device contains playable music.
Insert the USB device
Remove the card
1
Slide the USB socket cover marked
the left.
2
Insert the USB device into the USB socket.
» The unit starts to play from the USB
device automatically.
to
1
2
Press
3
Remove the card.
to turn off the unit.
Press the card until you hear a click sound.
» The card is now disengaged.
Play options
Remove the USB device
1
2
Press
to turn off the unit.
!?#
/
.
To search backward/forward rapidly within
/
for 3
seconds.
Remove the USB device.
Insert a card
This unit supports SD and SDHC cards.
Press
14
EN
again.
Search for an MP3/WMA track
Search within the current folder
Note
1
2
3
.
to release the panel.
1
Press .
» The name of the current track is
displayed.
2
Rotate
folder.
3
Press
Insert the card into the card slot.
Close the front panel.
» The unit starts playing from the card
automatically.
to select anther track in current
1
2
3
2
Press .
» The name of the current folder is
displayed.
Rotate
Rotate
[SHUF FLD]: start random play for all
tracks in the current folder.
[SHUF ALL]: start random play for all
tracks.
[SHUF OFF]: turn off random play.
to navigate through all folders.
Press to access the selected folder.
» from the selected folder automatically.
Tip
! .
View play information
;DISP repeatedly to view:
Track number and elapsed play time
Folder
File
Album
Artist
Title
to select a setting:
Connect external sound
source
1 Connect the external sound source to
MP3 LINK socket with a 3.5 mm cable.
2
Press SOURCE repeatedly until [MP3
LINK] is displayed.
3
Operate the external component (refer to
the instructions supplied with the external
component).
Repeat play
1
;REP.
» [REP] is displayed.
2
Rotate
[REP TRK] (repeat one track): play current
track repeatedly.
[REP FLD] (repeat a folder): play all tracks
in the current folder repeatedly.
[REP ALL] (repeat all tracks): play all tracks
repeatedly.
to select a setting.
You can play the tracks in random order:
1
;SHUF.
» [SHUF] is displayed.
EN
15
Engl i sh
Search in other folder
6 Adjust sound
2
Adjust volume
Turn clockwise/counterclockwise to increase/
decrease volume.
Mute
You can turn off the sound of your audio.
; .
again.
Turn Dynamic Bass Boost
(DBB) on/off
1 Press DBB and the current setting is
displayed:
» [DBB ON] : The Dynamic Bass Boost
(DBB) function is on.
Press DBB again to change the DBB
setting.
[FLAT]
{F
[POP] (pop)
[USER] (user)
[TECHNO] (techno)
[ROCK] (rock)
[CLASSIC] (classic)
[JAZZ] (jazz)
[OPTIMAL] (optimal)
Switch music listening zone
Philips’ innovative Zone technology enables
driver or passengers to enjoy music with the
best speakers balance and experience more
vivid spacial effect as the artist is intended to
create. You can switch the music listening zone
from driver to passengers for the best speaker
sound settings in car.
1
Press ZONE.
» The current setting is displayed.
2
Rotate
» [DBB OFF] : The DBB function is off.
2
Press EQ / AUDIO again to select a preset
EQ setting:
Turn on/off MAX sound
1 Press 6281'.
to select a setting:
[ALL]
[FRONT -L] (Front left)
[FRONT -R] (Front right)
[FRONT]
» The current setting displays
2
» [MAX ON]: The maximum sound
(max sound) function is on.
Other sound settings
» [MAX OFF]: The maximum sound
function is off.
You can also adjust the preset EQ / AUDIO
settings.
Press
6281'
again to select an option.
Select preset equalizer
1 Press EQ / AUDIO.
» Current Equalizer setting is displayed.
16
EN
1
2
Press EQ / AUDIO for 3 seconds.
Press or repeatedly to select the item
to be adjusted:
[BAS] (bass) range: -7 to +7.
[TRE] (treble) range: -7 to +7.
[BAL] (balance) range: 12L to 12R.
€}€F
3
[FAD] (fader) range: 12R to 12F. (R =
‚€F
Rotate
to select a value.
7 Adjust system
settings
Engl i sh
Turn beep sound on/off
,
You can turn off/on this beep sound.
1
2
Press MENU.
3
Rotate to select a setting:
[BEEP ON]: Turn on the beep sound.
[BEEP OFF]: Turn off the beep sound.
Press or
displayed.
repeatedly until [BEEP] is
Select blackout setting
You can set the screen to turn off automatically
after the unit is idle for 10 or 20 seconds.
1
2
3
Press MENU.
Press
/
displayed.
Rotate
repeatedly until [BKO] is
to select a setting:
[BKO 10 S] : Turn off the screen
automatically 10 seconds after last
operation.
[BKO 20 S] : Turn off the screen
automatically 20 seconds after last
operation.
[BKO OFF] : Never turn off the
screen.
Turn demo mode on/off
1 Press MENU.
2 Press / repeatedly until [DEMO]
displays.
3
Rotate
to select a setting:
EN
17
[DEMO ON] : Turn on the demo
mode. When the unit is idle for more
ƒ=
displayed.
TEL
MUTING wire to your hands-free kit and audio out
jack to the REAR AUX in jack of the unit.
[DEMO OFF] : Turn off the demo
mode.
Dimmer
1 Press MENU.
2 Press or repeatedly until [DIMMER]
is displayed.
3
Note
Rotate
to select a setting:
[DIMM HIGH] (dimmer high)
[DIMM LOW] (dimmer low)
Reset
You can reset the unit to its default setting.
1
2
Detach the front panel.
Press the reset button by using a ball-point
pen or a similar tool.
» Preset adjustments such as preset
channels and sound adjustments are
erased.
Dance
You can turn on or off the spectrum on the
LCD display.
1
2
Press MENU.
3
Rotate
Press or
displayed.
RESET
repeatedly until [DANCE] is
to select a setting:
[DANCE ON] : Turn on the spectrum.
[DANCE OFF] : Turn off the
spectrum.
Rear Aux
1 Press MENU.
2 Press or repeatedly until [TEL MUTE]
is displayed.
3
18
Rotate
to select a setting:
[NORMAL]@„
[MUTE] is displayed.
[REAR AUX]@„
[PHONE IN] is displayed.
EN
Engl i sh
8 Additional
information
Detach the front panel
You can detach the front panel to deter theft.
1
2
3
Press
4
Store the panel in the supplied carry case
to protect it from dirt or damage.
to release the panel.
Push the left side of the panel rightward.
Pull the panel towards you to disengage it
from the chassis.
Note
[
internal malfunction. Consult your Philips dealer.
Remove the unit
You can remove the unit from the dashboard.
1
2
Detach the front panel and the trim plate.
Pull out the unit by using the disassembly
tools.
Replace fuse
[
1
2
Check the electric connection.
3
Replace the fuse.
Buy a fuse that matches the voltage of the
damaged fuse.
EN
19
9 Product
information
…+†{@…+†ƒƒ
interface reading all speed support
ƒƒ<=F
Memory cards (SD / SDHC)
Supported formats:
Note
…+†@‚*ƒ>
FAT32
MP3 bit rate (data rate): 32-320 Kbps
and variable bit rate
ƒ<‡;$
ƒƒ‡Jƒ>‡F
negative ground
15 A
4-8
"„*‡ˆ‡‰‡Š‡‹
ƒ<F
Supported sampling frequencies: 44.1
\&ˆŠ\&
Directory nesting up to a maximum
of 8 levels
50 W x 4 channels
Number of albums/ folders: USB or
memory maximum 99
22 W x 4 RMS (4
10% T.H.D.)
2.5 V
%[email protected]…+†
memory maximum 999
ID3 tag v2.0 or later
Product information is subject to change without prior
notice.
Power supply
Fuse
Suitable speaker
impedance
Maximum power
output
Continuous power
output
Pre-Amp output
voltage
Aux-in level
Dimensions (W x H
x D)
Weight
500 mV
182 x 52 x 144.7 mm
Frequency range 87.5 - 108.0 MHz (100kHz
- FM
per step in auto search and
50kHz per step in manual
search)
Frequency range 522 - 1620 KHz (9 kHz)
- AM (MW)
530 - 1710 kHz (10 kHz)
Usable sensitivity 8 μV
- FM
Usable sensitivity 30 μV
- AM(MW) (S/N
= 20 dB)
Compatible USB devices:
20
EN
Empty albums: an empty album is an
album that does not contain MP3/
"„*
display.
…
‚#"
F
„GŒ#
ignored and not played.
**$"*‡G$„
;}„"„*
!
ˆˆˆF
"„*
0.86 kg
Radio
Unsupported formats:
…+†{@…+†ƒƒ
interface reading all speed support
ƒƒ<=F
11 Glossary
Engl i sh
10 Troubleshooting
Caution
Never remove the casing of this apparatus.
!!
the system yourself.
If you encounter problems when using this
requesting service. If the problem remains
!G
?F"G
ensure that your apparatus is nearby and the
model number and serial number are available.
No power or no sound.
Car engine is not on. Turn the car engine
on.
Cable is not correctly connected. Check
connections.
Fuse is burnt. Replace fuse.
Volume is too low. Adjust volume.
[!
the RESET button.
Ensure that the track played is of a
compatible format.
Noise in broadcasts.
Signals are too weak. Select other stations
with stronger signals.
Check the connection of the car antenna.
Change broadcast from Stereo to mono.
M
MP3
*
system. MP3 is the abbreviation of Motion
Picture Experts Group 1 (or MPEG-1) Audio
Œ"„GŒ$;J}
CD-RW can contain about 10 times more data
than a regular CD.
S
SD
Secure Digital. A type of memory card with a
{
SDHC
Secure Digital High Capacity (SDHC) is a type
{+;*<==
+;*<==
SD cards to reach higher capacities from 4GB
Œ<Ž†
W
WMA (Windows Media Audio)
*„
part of Microsoft Windows Media technology.
Includes Microsoft Digital Rights Management
"„‡
"„*
encoding technology.
Preset stations lost.
Battery cable is not correctly connected.
Connect the battery cable to the terminal
that is always live.
Display show ERR-12
USB data error. Check the USB device.
Display show ERR-3
USB/SD data error.
EN
21
᥽̻Ճሙ
1DPHRIWKH
3DUWV
ఙർఙࠂྠ᠂ਾϾዼ
+D]DUGRXVWR[LF6XEVWDQFH
ధ
3E/HDG
‫܌‬+J
ᬄ&G
੆ࡒ۴&KURPLXP ‫أ‬ᜌ৷Ъ
‫أ‬ᜌ‫ف‬Ъ૚
0HUFXU\
FDGPLXP
3%%
3%'(
+RXVLQJ
ທक़
2
2
2
2
2
2
'9'&'ORDGHU
'9'&'ܿ‫ދ‬
;
2
2
2
2
2
/&'3DQHO
၅ࣚ૯ϴ
;
;
2
2
2
2
3:%V
‫׌‬੢ϴቊࡵ
;
2
2
2
2
2
$FFHVVRULHV
5HPRWHFRQWURO
FDEOHV
‫ࡵڼ‬IJီ३చĶ‫׌‬
჻ཐĶ৹ࢨཐij
;
2
2
2
2
2
%DWWHULHVLQ5HPRWH
&RQWURO=Q&
ီ३చ‫׌‬ԁ
;
2
2
2
2
2
¾ńњ൙‫ۂ‬Ⴙ‫؁‬Ⴙ‫ݡ‬༂ᇍᄡ‫ۂ‬ҊࡵෲႹबᇍҏਜᇓ֩‫ݧ‬਌बᄡ6-7їም݃‫֩׫‬ཏ਌ဵ౴ၟ༳‰
2,QGLFDWHVWKDWWKLVWR[LFRUKD]DUGRXVVXEVWDQFHFRQWDLQHGLQDOORIWKHKRPRJHQHRXVPDWHULDOVIRUWKLVSDUW
ࡩ฼ᇓ໗
LVEHORZWKHOLPLWUHTXLUHPHQWLQ6-7ķ
ńњ൙‫ۂ‬Ⴙ‫؁‬Ⴙ‫ݡ‬༂ᇍᇄഖᄡ‫ۂ‬Ҋࡵ֩ଚ၆बᇍҏਜᇓ֩‫ݧ‬਌ӕԟ6-7 ķ їም݃‫֩׫‬ཏ਌ဵ
౴‰
;,QGLFDWHVWKDWWKLVWR[LFRUKD]DUGRXVVXEVWDQFHFRQWDLQHGLQDWOHDVWRQHRIWKHKRPRJHQHRXVPDWHULDOV
XVHGIRUWKLVSDUWLVDERYHWKHOLPLWUHTXLUHPHQWLQ6-7
ညΧ΁ၬణᬀ(QYLURQPHQWDO3URWHFWLRQ8VH3HULRG
7KLVORJRUHIHUVWRWKHSHULRG\HDUV
‫׌‬ሴྔ༓Ӆ௚ᇓ‫ݧ‬Ⴙ֩Ⴙ‫؁‬Ⴙ‫ݡ‬༂ᇍࠋჱෑᄡᆢӌൔႬ֩์ࡵ༳҆ߺ‫ك‬ഷທྈࠋ๰ёĶ‫׌‬ሴྔ༓Ӆ௚Ⴌ߀ൔ
Ⴌ‫׌ۂ‬ሴྔ༓Ӆ௚҆ߺ‫ࣦߐؗ‬ᄳӲ࿼ᇛ໮ಝࠋ‫ؗ‬ఇಪപˆґӅᄳӲ࿼ᇛ෩‫֩ݡ‬௽ཏ‰
7KLV ORJR UHIHUV WR WKH SHULRG \HDUV GXULQJ ZKLFK WKH WR[LF RU KD]DUGRXV VXEVWDQFHV RU HOHPHQWV
FRQWDLQHGLQHOHFWURQLFLQIRUPDWLRQSURGXFWVZLOOQRWOHDNRUPXWDWHVRWKDWWKHXVHRIWKHVH>VXEVWDQFHVRU
[email protected]\VHYHUHHQYLURQPHQWDOSROOXWLRQDQ\ERGLO\LQMXU\RUGDPDJHWRDQ\DVVHWV
117
© 2011 Koninklijke Philips Electronics N.V.
All rights reserved.
CE131_IFU_00_V2.0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement