Philips | CED1700 | User manual | Philips Car entertainment system CED1700

Register your product and get support at
www.philips.com/welcome
EN
User manual
ZH-CN
Ⴌ߀൱Ҭ
ZH-TW Ԛ͂ʹ˫
ES
Manual del usuario
PT-BR
Manual do Usuário
CED1700
1 Important
Safety
Notice
Introduction
What’s in the box
Overview of the main unit
Overview of the remote control
2 Get started
Install the car audio
Install remote control battery
Turn on
Set date and time
3 Listen to radio
Tune to a radio station
Store radio stations in memory
Tune to a preset station
Play with RDS
4 Play
Load discs
Connect USB device
Insert SD/MMC card
Play/Pause
Repeat
Skip/search
Search within a title/folder
Random play
Select audio language
Select subtitle language
Rotate pictures
Zoom
5 Play with Bluetooth device
Pair the Bluetooth-enabled devices
Make a call
Receive call
Listen to music from Bluetooth device
Adjust Bluetooth settings
4
4
4
5
6
7
9
10
10
15
16
16
17
17
17
17
18
20
20
20
21
21
21
21
22
22
22
22
23
23
26
26
26
26
27
27
27
Adjust volume
Mute
Select preset equalizer
Adjut fader/balance
Adjust Subwoofer value
Set Dynamic Bass Boost (DBB)
7 Adjust settings
28
28
28
Adjust general settings
Adjust Bluetooth settings
8 Others
Listen to other devices
Reset
Remove the unit
Replace fuse
29
29
29
29
29
9 Product information
30
10 Troubleshooting
32
33
About Bluetooth device
11 Glossary
34
24
24
24
25
25
25
EN
3
English
6 Adjust sound
Contents
1 Important
•
Do not place any sources of danger on
the apparatus (e.g. liquid filled objects,
lighted candles).
Safety
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4
Read and understand all instructions
before you use the apparatus. If damage
is caused by failure to follow instructions,
the warranty does not apply.
Use of controls or adjustments or
performance of procedures other than
herein may result in hazardous radiation
exposure or other unsafe operation.
This unit is designed for negative ground
(earth) 12 V DC operation only.
To reduce the risk of traffic accident, do
no watch video during driving.
To ensure safe driving, adjust the volume
to a safe and comfortable level.
Improper fuses can cause damage or
fire. When you need to change the fuse,
consult a professional.
Use only the supplied mounting hardware
for a safe and secure installation.
To avoid short circuit, do not expose the
apparatus, remote control or remote
control batteries to rain or water.
Never insert objects into the ventilation
slots or other openings on the apparatus.
Never place any objects other than discs
into the disc tray/slot.
Visible and invisible laser radiation when
open. Avoid exposure to beam.
Risk of damage to the screen! Never
touch, push, rub or strike the screen with
any object.
Never use solvents such as benzene,
thinner, cleaners available commercially,
or anti-static sprays intended for discs.
Clean the apparatus with soft, damp
cloth. Never use substances such as
alcohol, chemicals or household cleaners
on the apparatus.
The apparatus shall not be exposed to
dripping or splashing.
EN
Notice
The making of unauthorized copies of
copy-protected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Philips
is under license.
Manufactured under license from Dolby
Laboratories.
“Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
Other trademarks and trade names are those
of their respective owners.
“DivX, DivX” Certified, and associated logos
are trademarks of DivX, Inc. and are used
under license.
Offical DivX® Certified product. Plays all
versions of DivX® video (including DivX® 6)
with standard playback of DivX® media files.
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Philips
is under license.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
This product complies with the radio
interference requirements of the European
Community.
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed of with normal household
waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment
and human health.
2010 © Koninklijke Philips Electronics N.V. All
rights reserved.
Specifications are subject to change without
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.
Recycling
Introduction
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheel bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
With the car entertainment system, you can
enjoy:
• Audio/video/JPEG pictures from
• DVD, VCD or CD
• USB devices
• SD/SDHC/MMC cards
• External devices
• FM or AM (MW) radio
• Audio from Bluetooth-enabled devices
EN
5
English
This apparatus includes this label:
Besides, you can make/receive phone calls with
Bluetooth-enabled devices and quickly find
the destination you seek with external GPS
navigation box (Philips model CEA100).
a Main unit and front panel
b Remote control
c Trim plate
d Hexagon head screw
e ISO standard connector
What’s in the box
Check and identify the contents of your
package:
a
b
f Audio and Video cable
g Screws
- M5x8mm x 4 pcs
h Rubber cushion
i Remote control battery
j User manual
k Quick start guide
l Warranty card
d
e
f
L-CH
R-CH
L-CH
R-CH
c
g
h
i
j
k
l
6
EN
English
Overview of the main unit
h
g
f
a RESET
b
•
Open the front panel to insert/eject
disc/card.
e
d
c
b a
h TILT
• Adjust the position of the front
panel.
• Press and hold to close the front
panel.
c Remote sensor
d Touch panel
e
•
•
/MUTE
Turn the unit on or off.
Turn mute on or off.
f +/• Increase/decrease volume.
g DIMMER
• Adjust dimmer settings.
• Press and hold to enter or exit GPS
navigation system
EN
7
i
i Built-in microphone
j SD/SDHC/MMC card slot
k Disc slot
8
EN
j
k
x
w
j DVD TITLE
• Select DVD/DivX subtitle language.
a
b
v
2.
u
9 2 /8 0 (
c
t
s
r
q
' 9'
$ 8 ' ,2
p
o
n
0 8 6 ,&
7,/7
' 9'
0 (1 8
' 9'
7,7/(
$ 8 ' ,2
' ,0 0 (5
d
e
f
g
h
i
j
k
l
m
English
i AUDIO
• Access speaker fader/banlance menu.
Overview of the remote
control
k DIMMER
• Access illuminate dimmer settings.
l SW
• Turn on/off subwoofer.
m DBB
• Turn on or off Dynamic Bass Boost
(DBB) sound.
n EQ
• Access equalizer setting menu.
o DVD MENU
• Access DVD main menu.
p DVD AUDIO
• Select audio language or audio
channel.
q NAVI
• Enter/exit the navigation system.
r
•
Adjust shuffle play mode.
•
Start or pause play.
s
a
•
Mute or unmute audio.
•
Open the front panel to insert/eject
disc/card.
t
b
c VOLUME +/• Adjust volume.
d
/REJECT
• Terminate call.
• Reject incoming call.
e
•
Return to previous menu or exit.
f
•
Adjust repeat mode.
•
Access home menu.
g
h TILT
• Adjust the position of the front
panel.
/RECEIVE
• Answer phone.
• Dial number.
u OK
• Confirm selection.
v
/
•
•
•
Skip to previous/next track/chapter.
Play fast backward/forward.
Tune for radio station.
•
Turn the unit on or off.
w
x
/
•
•
•
•
Skip to the previous/next preset
station.
Skip to the previous/next folder.
Search backward/forward for DVD
video.
Move cursor up/down.
EN
9
2 Get started
Caution
• Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Always follow the instructions in this chapter in
sequence.
Notes on speaker connection
• Never connect speaker wires to the
metal body or chassis of the car.
• Never connect speaker wires with stripes
to one another.
Connect wires
Caution
• Ensure that all loose leads are insulated with
electrical tape.
1
Install the car audio
Check the car’s wiring carefully, then
connect them to the supplied ISO wires.
These instructions are for a typical installation.
However, if your car has different requirements,
make the corresponding adjustment. If you have
any questions regarding installation kits, consult
your Philips car audio dealer.
Caution
• This unit is designed for negative ground
(earth) 12 V DC operation only.
• Always install this unit in the car dashboard.
•
•
•
•
•
•
•
Other locations can be dangerous as the rear
of the unit heats up during use.
To avoid short-circuit: before you connect,
ensure that the ignition is off.
Ensure that you connect the yellow and red
power supply leads after all other leads are
connected.
Ensure that all loose leads are insulated with
electrical tape.
Ensure that the leads do not get caught under
screws orin parts that will move (e.g. seat rail).
Ensure that all ground (earth) leads are run to
a common ground (earth) point.
Use only the supplied mounting hardware for a
safe and secure installation.
Improper fuses can cause damage or fire.
When you need to change the fuse, consult a
professional.
Note on the power supply lead (yellow)
• When you connect other devices to this
system, ensure that the rating of the car
circuit is higher than the total fuse value
of all the connected devices.
10
EN
1
2
Connector Connect to
Yellow wire The +12V car battery
which is live at all times.
Blue wire
The electric antenna
control lead or power
supply lead of the
antenna booster
If there is no electric
antenna or antenna
booster, or it is manually
operated telescopic
antenna, it is not
necessary to connect this
lead.
EN
11
English
3
Black wire
A metal surface of the
car
First connect the black
ground (earth) lead, then
connect the yellow and
red power supply leads.
The +12V power terminal
which is live in the
accessory (ACC) position
of the ignition switch
If there is no accessory
position, connect to the
+12V car battery terminal
that is always live. Be
sure to connect the black
ground (earth) lead to a
metal surface of the car
first.
Left speaker (Rear)
4
Red wire
5
Green and
green/black
wires
White and Left speaker (Front)
white/black
wires
Gray and
Right speaker (Front)
gray/black
wires
Purple and Right speaker (Rear)
purple/black
wires
6
7
8
2
Connect the other end of the supplied
standard connector to the car audio
system.
Caution
• In order to avoid any accident, the driver must
not watch video while driving. This unit is
designed to not allow watching moving video
while driving. Park your car in a safe place and
engage the parking brake before watching
moving video.
12
EN
Note
• The video blocking system under parking
brake not engaged only control this unit’s
display, and will not affect the video output
through the rear RCA video output.
• If watch moving video from Disc or AV-In
source but parking brake is not properly
connected, the video signal will be blocked
by the system, and the below display will be
shown on TFT:
English
L-CH
6
R-CH
R-CH
5
L-CH
1
7
890!"§ $ %
2
/
3
&
P
R
N
D
2
L
4
1
2
Connector/
Connect to/with
Obeject
Pink wire
Extension wire
2.5m extension Parking brake (-)
wire(Not
included)
3
4
5
Brake switch
Ground
ISO wires
6
Grey wire
Connected in step 1
above.
Rear line out Left/
Right
EN
13
Black wire
Front line out Left/
Right
Subwoofer
Aux Right
Aux Left
Video in
Camera in
Video out 1
Video out 2
Reverse camera (B+)
8
9
10
11
12
13
14
15
16
17
Blue cable
Red cable
White cable
Yellow cable
Yellow cable
Yellow cable
Yellow cable
Purple wire
Gearbox switch
Reverse gear
Back lamp lead +
signal
CEA100
7
Connect radio antenna
Connect the radio antenna to the radio
antenna of the system for better radio signal.
1
Note
• Please consult your Phillips dealer or
distributer to purchase the CEA100 external
navigation box.
Connect the radio antenna to the car
antenna.
Mount in the dashboard
Note
• Check wire connection before you mount the
unit into a car.
• If preset radio stations are lost when the
ignition key is turned OFF and then back ON,
reconnect the red leads crosswise to the
yellow ones.
1
If the car does not have an on-board
drive or navigation computer, disconnect
the negative terminal of the car battery.
• If you disconnect the car battery in
a car that has an on-board drive or
navigation computer, the computer
may lost its memory.
• If the car battery is not disconnected,
to avoid short-circuit, ensure that
bare wires do not touch each other.
2
Ensure that car dashboard opening is
within these measurements:
Connect external navigation box
This unit supports GPS navigation by
connecting Philips CEA100 external GPS
navigation box.
14
EN
English
m
5m
mm
53mm
183
•
3
Since the unit cannot be used if the
dashboard opening’s slant angle is
above 20 degrees: Ensure that the
horizontal slant of the car dashboard
opening is between 0 and 20
degrees.
Slide the unit into the dashboard until a
click sound is heard.
5
Reconnect the negative terminal of the
car battery.
Install remote control battery
Caution
• Risk of explosion! Keep batteries away from
heat, sunshine or fire. Never discard batteries
in fire.
Note
• Remove batteries if they are exhausted or if
4
Attach the trim plate.
the remote control is not to be used for a long
time.
• Batteries contain chemical substances, they
should be disposed of properly.
• Perchlorate Material - special handling may
apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate.
1
2
Open the battery compartment.
3
Close the battery compartment.
Insert one CR2025 battery with correct
polarity (+/-) as indicated.
EN
15
4
5
6
7
Touch [Date].
Touch year digit to highlight this digit.
Touch / to set year.
Repeat step 5 and 6 to set month and day.
Set Time
1
2
3
Touch [Set time].
Touch hour/minute digit to highlight the digit.
Touch / to set hour/minute.
Set time format
1
Turn on
Touch[Clock Mode]repeatedly to toggle
between [12Hr] and [24Hr] options.
Tip
Caution
• Risk of road accidents! Never watch video or
adjust settings while you drive.
1
Press to turn on the unit.
» The available OSD (On-Screen
Display) languages are displayed.
2
Touch a language to select.
» The OSD language is changed to the
selected language immediately.
•
To adjust screen brightness, press
DIMMER on the remote control, then
press or .
To turn off the unit, press and hold for
3 seconds.
•
Set date and time
1
2
Touch to display main menu.
Touch [Settings].
» Setting menu displays.
3
Touch
16
EN
to access 2nd page.
• When date/time is set, touch
the upper level menu, or touch
main menu.
to go back to
to go to the
Store radio stations in
memory
Tune to a radio station
You can store up to 6 stations in each band.
1
2
Store stations manually
Touch
to display home menu.
Touch [Radio].
» Radio screen displays.
1
2
3
English
3 Listen to radio
Select a band.
Tune to the station you want to store.
Touch and hold one of the channels 01 to
06 over 2 seconds.
» The station is saved under the selected
channel.
Store stations automatically
3
Touch on FM or AM repeatedly on the
left of the screen to select band:
• FM band options: FM1, FM2, FM3
• AM band options: AM1, AM2
4
Briefly touch or to tune to a radio
station by step.
• Touch or for over 1 seconds to
tune to a radio station automatically.
You can search for a station with intro search,
which broadcasts a 10-second preview of each
detected radio station.
1
2
3
Select band.
Touch
.
Touch [Auto Store].
» Auto search starts. The six strongest
stations of the selected band are saved
in preset channels 1-6 automatically.
Select radio range
Before you start to search for radio stations,
you can select radio range.
1
2
Touch
.
Touch [Radio range] to toggle tuner
sensitivity from normal to high sensitivity.
• [Distance]: Only stations with strong
signals can be broadcast.
• [Local]: Stations with strong and
weak signals can be broadcast.
Tune to a preset station
1
2
3
Tap [Radio].
Select band.
Tap one of the preset channels (01 to 06)
to select a preset station.
EN
17
Play with RDS
The RDS (Radio Data System) function
operates only in areas with FM stations
broadcasting RDS signals. If you tune to an RDS
station, an RDS icon and the station name are
displayed.
Activate AF/TA/REG/CT functions
1
Under radio mode, Touch .
» The radio option menu is displayed.
2
Touch [Off] after [RDS].
» RDS turns on.
3
Touch on each option repeatedly to turn
on/off the corresponding function.
• AF (alternate frequency):
automatically searches for a different
station when the tuner cannot get a
good reception.
• TA (traffic announcement): allows
you to receive traffic announcements
automatically no matter what source
you are listening to.
Select program type
Before tuning to RDS stations, you can select
program type and let the unit search only for
programs of the selected category.
1
Touch on FM band to select FM1, FM2,
or FM3.
2
Touch [PTY].
» List of available program type is
displayed.
18
EN
3
Touch or
screen.
4
Touch on the selected program type
» The unit starts to search stations of
the selected program type.
Item
to display the next/previous
1
2
Program
type
News
Affairs
3
Info
4
5
Sport
Educate
6
Drama
7
Culture
8
9
Science
Varied
10
11
12
13
Pop M
Rock M
Easy M
Light M
14
15
Classics
Other M
16
17
18
Weather
Finance
Children
19
Social
Description
News services
Politics and
current affairs
Special
information
programs
Sports
Education and
advanced training
Radio plays and
literature
Culture, religion
and society
Science
Entertainment
programs
Pop music
Rock music
Light music
Light classical
music
Classical music
Special music
programs
Weather
Finance
Children’s
programs
Social Affairs
Religion
Phone In
Travel
Leisure
Jazz
Country
Nation M
Oldies
Folk M
Document
Test
Alarm
Religion
Phone In
Travel
Leisure
Jazz Music
Country Music
National Music
Oldies Music
Folk Music
Documentary
Alarm Test
Alarm
English
20
21
22
23
24
25
26
27
28
29
30
31
EN
19
4 Play
Note
• Depends on where you bought the unit, you
can play DVD discs with one of the following
region codes:
Load discs
You can play video, audio or images stored on
the following discs:
• DVD video, DVD-R, DVD-RW
• VCD
• Audio CD, CD-R, CD-RW
Supported DVD
region code
Asia Pacific, Taiwan,
Korea
Note
• Ensure that the disc contains playable content.
1
Countries where you
bought the unit
China
Insert the disc into the disc slot with label
side facing up.
Latin America
Russia, India
Connect USB device
Note
• Ensure that the device contains playable
content.
1
2
» Front panel closes automatically.
» Play starts automatically.
» To remove the disc, press the
button.
» When the disc is ejected, the unit
switches to the previous source,
if connected. Otherwise, the
unit switches to [Radio] mode
automatically.
20
EN
Open the lid of USB socket.
Insert the USB to the USB socket.
» Play starts automatically.
Note
• Ensure that the card contains playable content.
1
Press the button on the front panel.
» front panel opens.
2
Insert the card into the card slot until a
click sound is heard.
» Play starts automatically.
Repeat
During play, you can select different repeat play
modes.
For DVD/VCD video disc:
1
Touch anywhere on the screen to display
the control bar.
2
Touch repeatedly to select different
repeat mode.
Tip
• If you can’t find
in the control bar, touch
on the left lower of the screen to display the
2nd control bar.
For MP3/WMA/CD audio files:
1
Touch on the upper line of the screen
repeatedly to select different repeat
mode.
Tip
• You can also press
on the remote control to
select repeat play mode.
Note
• Repeat options available depend on the media
type being played.
Remove the SD/MMC card
1
Press the
panel.
2
Press the card until a click sound is heard.
» The card is now disengaged.
3
Remove the card.
button to open the front
Skip/search
1
2
Play/Pause
1
Once a disc, USB or SD card is inserted,
play starts automatically.
For DVD movie, if a menu appears, press
to start play.
2
To pause, tap .
• To resume play, tap
3
4
Tap
to return to playlist menu.
Tap one of below icons to select folder/
file:
•
: To display all available audio
folders/track.
•
: To display all available picture
folders/files.
•
: To display all available video
folders/files
Tap
or
Tap
to start play.
to select a folder/track.
again.
EN
21
English
Insert SD/MMC card
Search within a title/folder
•
6
Search by step
1
To clear all input, touch
.
Touch after finished entering.
» Play starts from the selected section.
Touch anywhere on the screen to display
control bar.
Random play
You can play audio tracks/files or VCD videos in
random order.
1
2
Touch
or
to skip to the previous or
next chapter/track.
Tip
• You can also press
on the remote control
to select random play mode.
Direct search
1
Touch anywhere on the screen to display
control bar.
2
Touch
on the left lower corner of the
screen.
» The second control bar displays.
3
During play, touch
repeatedly to turn
random play on or off.
Select audio language
For video discs that contain two or more audio
channels.
1
During play, touch anywhere on the
screen to display control bar.
2
Touch
on the left lower of the screen
to display the 2nd control bar.
3
Touch
repeatedly.
» The audio channel information is
displayed on the top of the screen.
Touch .
» The search screen is displayed.
Select subtitle language
For DVD/DivX discs that contain two or more
subtitle languages.
4
Touch repeatedly to choose searching
by chapter/title/time.
• The search options available depends
on the media source type.
5
Touch the numbers to enter chapter/title/
time number.
• To clear the previous input, touch .
22
EN
1
During play, touch anywhere on the
screen to display control bar.
2
3
Touch
to display the 2nd control bar.
Touch
repeatedly to select a language.
» The selected language is displayed.
English
Tip
• You may also press DVD TITLE on the remote
control repeatedly to select subtitle language.
Rotate pictures
1
When you view pictures, touch anywhere
on the screen to display control bar.
2
Touch
repeatedly to rotate the picture.
Zoom
You can zoom in pictures for a close view.
1
During viewing pictures, touch anywhere
on the screen to display menu bar.
2
Touch repeatedly to zoom in the
picture.
3
Touch , , or
enlarged picture.
to pan through the
EN
23
5 Play with
Bluetooth
device
Disconnect Bluetooth devices
1
To disconnect one device, touch
(red).
»
(green) is displayed.
Re-connect Bluetooth devices
1
Touch on top of the screen.
» The bluetooth/paired device screen
displays.
2
Touch on one device that you want to
re-connect.
3
Touch
(green).
» Start to re-connect the selected
device.
You can make or receive phone calls with
Bluetooth-enabled phones through the unit.
You can also listen to music from a Bluetoothenabled device.
Pair the Bluetooth-enabled
devices
To connect your Bluetooth device to the unit,
you need to pair the device to the unit. Pairing
needs only to be done once.
You can pair up to eight devices.
Note
• The operational range between this unit and a
•
•
•
•
Bluetooth device is approximately 5 meters.
Before you connect a Bluetooth device to this
unit, familiarize yourself with the Bluetooth
capabilities of the device.
Compatibility with all Bluetooth devices is not
guaranteed.
Any obstacle between this unit and a
Bluetooth device can reduce the operational
range.
Keep this unit away from any other electronic
device that may cause interference.
Tip
• The device will also be disconnected when the
device is moved beyond the operational range.
• If you want to reconnect the device to the
unit, place it within the operational range.
• If you do not want to reconnect the device to
the unit automatically, under Bluetooth mode,
touch , and then touch option after [Auto
connect] repeatedly until [Off] displays. For
details, see the “Adjust Bluetooth settings”
section.
1
Turn on the Bluetooth function on your
device.
2
Search for other Bluetooth device with
your device.
Make a call
3
4
Select “CED1700” in the pairing list.
You can make phone call with the unit under
any mode.
Enter default password “0000”.
» If pairing succeeds. the dial screen
displays.
Note
• Make sure the phone is connected to the unit
via Bluetooth.
1
24
EN
Touch on top of the screen.
2
3
Touch number icons directly to input
phone number.
• Touch c to delete last input
• Touch to access Bluetooth option
menu.
• Touch to go back to previous
screen.
After the phone number entered, touch
.
» The unit starts dialing.
Listen to music from
Bluetooth device
If the connected Bluetooth device supports
Advanced Audio Distribution Profile (A2DP),
you can listen to the music stored on the device
through the unit. If the device also supports
Audio Video Remote Control Profile (AVRCP)
profile, you can use the control on the unit or
its remote control to play music stored on the
device.
Receive call
1
2
3
By default, all incoming calls are received
automatically.
4
1
If your device support AVRCP,
2
If there is incoming call, [Incoming call...]
flashes on the screen. Speak into the
Bluetooth microphone.
When conversation ends, tap
to terminate the call.
Pair the phone with the unit.
Tap
to return to home menu.
Tap [Bluetooth].
» The Bluetooth menu is displayed.
Start play music via device.
1
Tap
.
2
Tap
to start play.
(red)
Tip
• You can select to receive calls manually by set
[Auto answer] to [Off] status.
Switch phone call to the mobile
If you do not want your passenger to hear
your incoming call, you can switch the call to
the mobile.
1
During talking, tap .
» The voice is transferred from the unit’s
loudspeaker to the mobile phone.
Note
• Check the manual of your Bluetooth device
and see whether it allows you to have full
Bluetooth controls.
Adjust Bluetooth settings
You can change below Bluetooth settings:
• [Auto answer]: to turn on or off
“Auto answer” function
• [Auto connect]: to turn on or off
“Auto connect” function
• [Paired Device]: display paired
device
EN
25
English
» The dial screen displays.
1
In Bluetooth menu, touch .
» The option menu is displayed.
2
Touch an option to change the setting.
6 Adjust sound
Adjust volume
1
Press +/- on the front panel to increase/
decrease volume.
Mute
1
During play, press /MUTE on the front
panel.
• To turn the sound back on, press
/MUTE again.
Tip
• You can also turn off sound by touching
on
the screen.
Select preset equalizer
You can select preset equalizer:
• [User]
• [Techno]
• [Rock]
• [Classic]
• [Jazz]
• [Optimal]
• [Flat]
• [Pop]
1
26
EN
During audio/video play, touch on the
screen.
» The current Equalizer setting is
displayed.
Touch
or
to select an EQ.
Touch or to adjust below settings:
• [Bass] bass range: -15 to +15
• [Mid] middle range: -15 to +15.
• [Treb] treble range: -15 to +15
• [LPH] low pass filter range: 60Hz,
80Hz, 100Hz, 200Hz.
• [MPF] middle pass filter range:
500Hz, 1KHz, 1.5KHz, 2.5KHz.
• [HPF] high pass filter range:10KHz,
12.5KHz, 15KHz, 17.5KHz.
4
Touch to restore the above settings into
default settings.
5
Touch
to exit.
Adjut fader/balance
You can also adjust the front and rear speaker
balance, the left and right speaker balance
settings.
1
2
During play touch
3
Touch [Front], [Rear], [Left], [Right]or
[C] (center) to adjust fader/balance value.
• Fader range: +16 to -16.
• Balance range: -16 to +16.
4
Touch
English
2
3
3
4
Touch [On] to turn on the subwoofer.
5
Touch
Touch / to adjust value of subwoofer
level and subwoofer low pass filter (LPF).
to exit.
Set Dynamic Bass Boost
(DBB)
1
Tap
to toggle between the settings.
• [DBB] on: The
icon is
illuminated.
• [DBB] off (default): The
icon is
gray.
on the screen.
Touch
.
» Sceen below displays:
to exit.
Adjust Subwoofer value
1
2
During play, touch
on the screen.
Touch .
» Sceen below displays:
EN
27
7 Adjust settings
[Parking
wire]
[off]
[on]
Adjust general settings
1
Touch
2
Touch [Settings].
» Setting menu displays.
3
4
Touch
to display home menu.
or
Touch on an option to display/select the
option.
EN
5
Touch
to exit.
to access 2nd page.
General Options
Description
settings
[Dimmer] [High] / [Mid- Turn on the screen
dle] / [Low] dim high/middle/
low.
[Beep]
[On]
Turn on the beep
sound. Each time
you press a button/icon, the unit
beeps.
[Off]
Turn off the beep
sound.
Select the on
[Lan[English], [
screen display
guage]
ࡩ฼ᇓ໗], [
language.
ْ฼ᇓ໗],
[Português],
[Español]
[External [Off]/ [On] Turn the external
Navi]
GPS off/on.
Select the suitable
[Tuner
[USA] /
Area]
[Latin]/ [Asia] country area of the
/ [Mid-East] radio.
/ [Europe] /
[Russia]
[Date]
Set the system
date.
[Clock
[12Hr]/[24Hr] Select time format.
Mode]
[Set Time]
Adjust clock of the
unit.
28
[Informa- [Enter]
tion]
[Calibra- [Start]
tion]
Turn off parking
wire
Turn on parking
wire
Display the information on the unit.
Calibrate the touch
screen.
Adjust Bluetooth settings
1
Touch [Bluetooth] on the home menu.
» Bluetooth menu displays.
2
Touch
menu.
3
Touch on the options to select:
to display Bluetooth option
Bluetooth Options
settings
[Auto
[On]
answer]
[Off]
[Auto
connect]
[On]
[Off]
[Paired
Device]
4
Touch
to exit.
Description
Answer paired phone
call automatically.
Answer phone call
manually.
If the pre-paired
device is within the
effective range, the
unit re-connects to
pre-paired device
automatically.
Need to re-connect
manually.
Touch to display
paired device(s).
Remove the unit
Listen to other devices
To repair, replace fuse, or replace the unit
with another car audio, remove it from the
dashboard.
You can connect an external audio/video device
to the unit.
1
2
1
Connect the car audio to the device
through the REAR OUT L/R connector
(see “Connect wires” section)
2
3
4
Touch
English
8 Others
Take off the trim plate.
Pull the unit out from the dashboard.
to display the home menu.
Touch [AV-IN].
Operated the connected the device (see
the instructions manual of the device).
Reset
When the unit hangs up, you can reset it.
1
Press reset button on the lower right of
the front panel with a ball-point pen or
similar tool.
Replace fuse
If there is no power, the fuse may be damaged
and need to be replaced.
1
2
3
Take out the unit from dashboard.
4
Replace the fuse.
Check the electric connection.
Buy a fuse that matches the voltage of the
damaged fuse (15A)
Tip
• When the unit is reset, all the settings remain
unchanged.
EN
29
9 Product
information
Note
• Product information is subject to change
without prior notice.
If the fuse gets damaged immediately after it
has been replaced, there may be an internal
malfunction. In such case, consult your Philips
dealer.
General
Power supply
Fuse
Suitable speaker
impedance
Maximum power
output
Continuous power
output
Pre-Amp output
voltage
Subwoofer output
voltage
Aux-in level
Dimensions
(W x H x D)
Weight (main unit)
Disc player
30
EN
12 V DC (11 V - 16 V),
negative ground
15 A
4-8
50 W x 4 channels
24 W x 4 channels
(4 10% T.H.D.)
2.0 V ( CD play mode;
1 kHz, 0 dB, 10 k
load)
2.0 V (CD play mode,
61 Hz, 0 dB, 10 k
load)
500 mV
178 x 100 x 185.4 mm
2.4 kg
Frequency response
Signal/noise ratio
Total harmonic
distortion
Channel separation
Video signal format
Video output
DVD / CD audio /
MP3 system
20 Hz - 20k Hz
>75dB
Less than 1%
>55dB
NTSC only
1 +/- 0.2V
Tuner
Frequency range - FM 87.5 - 108.0 MHz
(Europe)
Frequency range 522 - 1620 KHz
AM(MW)
(Europe)
Usable sensitivity - FM 5 uV
Usable sensitivity 50 uV
AM (MW)
LCD
Screen size
Display resolution
Contrast ratio
Brightness
Bluetooth
6.95 inches (16:9)
800 x 480 dots
300
350 cd/m2
Communication Bluetooth Standard
system
version 2.1
Output
Bluetooth Standard Power
Class 2
Maximum
Line of sight approx. 8m
communication
range
Frequency band 2.4 GHz band (2.4000
GHz - 2.4835 GHz)
Compatible
Hands-Free Profile (HFP)
Bluetooth
Handset Profile (HSP)
Advanced Audio
profiles
Distribution Profile
(A2DP)
Audio Video Remote
Control Profile (AVRCP)
SBC (Sub Band Codec)
Supported
SBC (Sub Band Codec)
codecs
Receive
Transmit
Compatible USB devices:
• USB flash memory (USB 2.0 or USB1.1)
• USB flash players (USB 2.0 or USB1.1)
• memory cards (SD / SDHC)
Supported formats:
• USB or memory file format: FAT16,
FAT32
• MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate
• WMA v9 or earlier
• Directory nesting up to a maximum of 8
levels
• Number of albums/ folders: maximum 99
• Number of tracks/titles: maximum 999
• ID31 tag v2.0 to v2.4
• File name in Unicode UTF8 (maximum
length: 128 bytes)
Supported MP3 disc format:
• ISO9660, Joliet
• Maximum title number: 512 (depending
on file name length)
• Maximum album number: 255
EN
31
English
System
•
•
Supported sampling frequencies: 32 kHz,
44.1kHz, 48 kHz
Supported Bit-rates: 32-320 Kbps and
variable bit rate
Supported video formats:
• DVD
• Divx Home theater
• MP4
• Xvid
Note
• To ensure a better playback, recommend that
file image size is not higher than 640X480,
frame rate is 20 fps, data rate is not higher
than 500kbps.
10 Troubleshooting
Warning
• Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/welcome). When you contact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
•
Car engine has not been started. Start
the car engine.
•
Connections is incorrect.
•
Fuse has been damaged. Replace fuse.
No sound
•
Volume is too low. Adjust volume.
•
Speaker connections is incorrect.
No response to the remote control
•
Ensure that the path between the
remote control and the unit is clear from
obstacles.
•
From a close distance, point the remote
control directly at the unit.
•
Switch F/R to correct position (F for front
control and R for rear control).
•
The function does not work. Refer to the
instructions.
•
Replace the remote control battery.
Disc does not play
32
EN
•
•
•
•
•
Disc is upside down. Ensure the printed
side is upwards.
Disc is dirty. Clean the disc with a
clean, soft, lint-free cloth. Wipe the disc
outwards from the center.
Disc is defective. Try another disc.
incompatible disc is used. Try another
disc.
Disc rating exceeds the restrict setting.
Change the rating settings to lower one.
Disc region code is not compatible with
the unit. Use disc with proper region
code.
No image
•
Parking brake wire connection is
incorrect. Check the parking wiring.
Image flashes or distorted
•
Video DVD settings do not match with
the DVD. Adjust video DVD settings.
•
Video connection is improper. Check the
connections.
Noise in broadcasts.
•
Signals are too weak. Select other
stations with stronger signals.
•
Check the connection of the car antenna.
•
Change broadcast from stereo to mono.
Preset stations lost.
•
Battery cable is not correctly connected.
Connect the battery cable to the terminal
that is always live.
Fuse is broken
•
The Fuse type is incorrect. Replace it with
a 15A fuse.
•
Speaker wire or power wire is grounded.
Check the connections.
Display show ERR-12
•
USB/SD data error. Check the USB
device or SD card.
English
•
About Bluetooth device
Music playback is unavailable on the system
even after successful Bluetooth connection.
•
The device cannot be used with the
system to play music.
The audio quality is poor after connection
with a Bluetooth-enabled device.
•
The Bluetooth reception is poor. Move
the device closer to the system or
remove any obstacle between the device
and the system.
Cannot connect with the system.
•
The device does not support the profiles
required for the system.
•
The Bluetooth function of the device is
not enabled. Refer to the user manual of
the device for how to enable the function.
•
The system is not in the pairing mode.
•
The system is already connected with
another Bluetooth-enabled device.
Disconnect that device or all other
connected devices and then try again.
The paired mobile phone connects and
disconnects constantly.
•
The Bluetooth reception is poor. Move
the mobile phone closer to the system or
remove any obstacle between the mobile
phone and the system.
•
Some mobile phones may connect and
disconnect constantly when you make
or end calls. This does not indicate any
malfunction of the system.
•
For some mobile phones, the Bluetooth
connection may be deactivated
automatically as a power-saving feature.
This does not indicate any malfunction of
the system.
EN
33
11 Glossary
B
Bite rate
The max data transfer through the USB port.
Bluetooth
Bluetooth® is a short-rang wireless protocol
that is meant to allow mobile devices to share
information and applications without the
worry of cables or interface incompatibilities.
The name refers to a Viking King who unified
Denmark. Operate at 2.4GHz. For more
information, see www.bluetooth.com.
M
MP3
A file format with a sound data compression
system. MP3 is the abbreviation of Motion
Picture Experts Group 1 (or MPEG-1) Audio
Layer 3. With the MP3 format, one CD-R or
CD-RW can contain about 10 times more
data than a regular CD.
R
Region code
A system that allows discs to be played only
in the region designated. This unit only plays
discs that have compatible region codes. You
can find the region code of your unit on the
product label. Some discs are compatible with
more than one region (or ALL regions.)
S
SD
Secure Digital. A type of memory card with a
flash memory.
34
EN
SDHC
Secure Digital High Capacity (SDHC) is a
type of flash memory card based on the SDA
2.00 specification. The SDA 2.00 specification
enables SD cards to reach higher capacities
from 4GB to 32GB, and growing.
W
WMA (Windows Media Audio)
An audio format owned by Microsoft, is a
part of Microsoft Windows Media technology.
Includes Microsoft Digital Rights Management
tools, Windows Media Video encoding
technology, and Windows Media Audio
encoding technology.
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
CED1700_00_UM_V5.0
Download PDF

advertising