DBX DriveRack PA+
DBX DriveRack PA+
Complete Loudspeaker Management System
The best just got even better! The DriveRack PA, far and away the world's most popular loud
speaker management system has now become the DriveRack PA+; the best has indeed gotten
better.
Showcasing all the features that users around the world have come to expect, including easy
setup, rock-solid reliability and unparalleled sound quality, the new version has gone to great
lengths to earn its "plus." With more settings, more control and enhanced circuitry, the sound
you seek is right at your fingertips.
Although the DriveRack PA+ is loaded with functions and features, it is easy to set-up and use.
The dbx exclusive Set Up Wizards walk you through system set up with easy to follow
step-by-step instructions. Just pick your speakers and amps from the built-in list on the PA+
and then let the Auto Level Wizard™ fine tune the level settings of each speaker. You can
then let the Auto EQ® Wizard help you further optimize your sound. Finish up by using the AFS
Wizard, which automatically sets filters to eliminate any feedback during performances. Within
minutes, your system will sound like it was tuned by a pro! No experience required. Get the
most out of your PA with the DriveRack PA+, the worldwide standard in loudspeaker
management.
Features..
-
Setup Wizard Steps Through Speaker and Amp Selection and Levels
Auto EQ™ Wizard with 28-Band RTA Tunes Your System For The Venue
AFS™ Wizard Helps Eliminate Feedback
Stereo Feedback Elimination with 12 feedback notch filters
dbx 120A Sub-harmonic Synthesizer
Classic dbx Input Compression
JBL® Speaker and Crown® Power Amp Tunings included
USB Firmware and Speaker Tunings Field Updatable With Harman HiQnet™ System
Architect
Full time RTA function
Front-Panel Output Mutes
Pink Noise Generator (used with Auto EQ and Auto Level Wizards)
1/3
DBX DriveRack PA+
-
Linked Stereo DSP Processing for ease of use
24-Bit ADC/24-Bit DAC, >113 dB Dynamic Range
2-Channel XLR Input and 6-Channel XLR Output
2x3, 2x4, 2x5, 2x6 Crossover Configurations
Dual 28-band Graphic EQ- Linked or Dual Mono
Stereo Multi-band Parametric EQ
Stereo Output Limiters
Output Alignment Delay
Power on/off Mute Circuitry
Front-panel RTA-M XLR input with phantom power
25 User Programs/25 Factory Programs
Full Graphic LCD Display
Front Panel Input and Output Meters
Analog Inputs
-
Number of Inputs:(2) Line inputs. (1) RTA Mic input
Connectors:(2) Female XLR line inputs, XLR RTA Mic input
Type:Electronically balanced/RF filtered
Impedance:> 40k ohm
Maximum Input Level: >+20dBu
CMRR:>45dB
RTA Mic Phantom Voltage+15VDC
RTA Mic EIN:
Analog Outputs
-
Number of Outputs: (6) Line Outputs
Connectors: Male XLR Type:Electronically balanced, RF filtered
Impedance:120 ohms Max
Output Level:+20dBu
CMRR:>45dB Alignment
Delay:10ms per channel (60ms total)
A/D Performance
- Type: dbx Type IV conversion system
- Dynamic Range: 110 dB A-weighted, >107 dB weighted
- Type IV dynamic range:123 dB with transient material, A-weighted, 22kHz BW; 121 dB
with transient material, unweighted, 22kHz BW; 115 dB typical with program material,
A-weighted, 22kHz BW Sample Rate:48kHz
D/A PERFORMANCE
-
Dynamic Range: 112 dB A-weighted, 110 dB unweighted
Sample Rate: 48kHz
2/3
DBX DriveRack PA+
SYSTEM PERFORMANCE
-
Dynamic Range: 110 dB A-weighted, >107 dB weighted
THD+N:0.004% typical at +4 dBu, 1kHz 0 dB input gain
Frequency Response:20Hz - 20kHz, +/-0.5dB
Interchannel Crosstalk:
Crosstalk input to output:
3/3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement