Installation Instructions for the F5U103 in Windows ME 1

Installation Instructions for the F5U103 in Windows ME
1. Insert the CD labeled “USB Serial Adapter Installation” into your CD drive (typically
drive D:\).
2. Insert the flat (type A) connector into an available USB port on your PC or USB hub
attached to your PC.
3. Insert the square connector (type B) into the USB Serial Adapter device.
You will see “Add New Hardware Wizard”.
4. When asked “What do you want Windows to do?”, select "Automatic search for a better
driver (Recommended)."
5. Click "Next>"...
The "Select Other Driver" window will appear... Choose the WIN98 folder.
6. Select the “USB To Serial Converter” with a location that will show in the WIN98
7. With the “USB To Serial Converter” selected for the WIN98 directory click "OK"... Then
files will be copied over to your hard drive.
The "Add New Hardware Wizard" window will appear telling you that it has finished installing
the software...
8. Click "Finish".
A new COM port will automatically be installed. Follow the instructions below to determine the
name of the new COM port.
Right-click the “My Computer” icon on your desktop.
Click “Properties” from the menu that appears.
Click on the “Device Manager” tab on the “System Properties’ page.
Click on the “+” next to “Ports (COM & LPT)”.
You will see a list of ports. One of the ports will be labeled “USB COM Port (COM #)”
where “COM #” is the number of the new COM port. This port will be used in your
Your Belkin Serial Adapter is now installed and configured for use with Windows® ME.