Parking Sensor Owner`s Manual

Front
Rear Sensor
Parking sensor
●Measuring the distance of Rear sensor
As the vehicle moves closer to an object the interval between beeps will shorten and each
segment will illuminate on the display.
Owner’s Manual
Warning
Depending on the size and shape of the object at the rear of the vehicle, the actual
distance the sensors initially detect may be shorter.
Step 1 Infinite ~ 3m (Green)
L
Sensor OFF
R
Sensor OFF
R
Sensor OFF
R
Step 2 3m ~ 2m (Yellow)
L
Step 3 2m ~ 1m (Orange)
L
Step 4 1m ~ 0.45m (Red 1ea)
L
R
Sensor OFF
Step 5 0.45 m ~ 0m (Red 2ea)
L
R
Sensor OFF
If required, the reverse sensor can be turned off by pressing the Sensor OFF button.
●Disclaimer
1. Parking sensors are designed to assist the driver whilst reversing.
It is the driver’s responsibility to maintain safe reverse parking practices.
2. The driver should react promptly to alerts from this unit.
3. Isuzu Australia Limited(IAL) does not guarantee or assume liability for damage or loss of sensors.
4. In no event shall IAL or it’s supplier be liable for any incidental, special, indirect,
or consequential damages(including any vehicle repairs or damages allegedly
caused by or associated with this product)whether resulting from the use, misuse,
or inability to use this product or from defects in the product.
Part Number 92956591
Back
Contents
Module x 1
Rear Sensor
Contents
Sensor x 4 / grommet x 8
Rivet x 8
Owner’s Manual x 1
The rear sensors will begin operating by placing the vehicle into reverse gear.
If the vehicle is fitted with both rear camera and reverse sensors, the reverse sensor
indicator is displayed at the bottom of the screen.
A vehicle with reverse sensor only, reverse sensor indicator is displayed at the top of
the screen.
■A vehicle with a rear camera and parking sensor installed.
Sensor harness x 1
20M harness x 1
Installation guide x 1
Rubber gasket x 4
Bracket x 4
1.6M Radio extension cable x 1
P Clamp x 4
■A vehicle with parking sensor only.
(Optional)
3M Velcro
adhesive
Battery
removal
toolxx11
(For control box fitting)
Cable Tie & Screw
20M harness x 1
16EA
16EA
10EA
10EA
Front
Rear Sensor
Parking sensor
●Measuring the distance of Rear sensor
As the vehicle moves closer to an object the interval between beeps will shorten and each
segment will illuminate on the display.
Owner’s Manual
Warning
Depending on the size and shape of the object at the rear of the vehicle, the actual
distance the sensors initially detect may be shorter.
Step 1 Infinite ~ 3m (Green)
L
Sensor OFF
R
Sensor OFF
R
Sensor OFF
R
Step 2 3m ~ 2m (Yellow)
L
Step 3 2m ~ 1m (Orange)
L
Step 4 1m ~ 0.45m (Red 1ea)
L
R
Sensor OFF
Step 5 0.45 m ~ 0m (Red 2ea)
L
R
Sensor OFF
If required, the reverse sensor can be turned off by pressing the Sensor OFF button.
●Disclaimer
1. Parking sensors are designed to assist the driver whilst reversing.
It is the driver’s responsibility to maintain safe reverse parking practices.
2. The driver should react promptly to alerts from this unit.
3. Isuzu Australia Limited(IAL) does not guarantee or assume liability for damage or loss of sensors.
4. In no event shall IAL or it’s supplier be liable for any incidental, special, indirect,
or consequential damages(including any vehicle repairs or damages allegedly
caused by or associated with this product)whether resulting from the use, misuse,
or inability to use this product or from defects in the product.
Part Number 92956591
Back
Contents
Module x 1
Rear Sensor
Contents
Sensor x 4 / grommet x 8
Rivet x 8
Owner’s Manual x 1
The rear sensors will begin operating by placing the vehicle into reverse gear.
If the vehicle is fitted with both rear camera and reverse sensors, the reverse sensor
indicator is displayed at the bottom of the screen.
A vehicle with reverse sensor only, reverse sensor indicator is displayed at the top of
the screen.
■A vehicle with a rear camera and parking sensor installed.
Sensor harness x 1
20M harness x 1
Installation guide x 1
Rubber gasket x 4
Bracket x 4
1.6M Radio extension cable x 1
P Clamp x 4
■A vehicle with parking sensor only.
(Optional)
3M Velcro
adhesive
Battery
removal
toolxx11
(For control box fitting)
Cable Tie & Screw
20M harness x 1
16EA
16EA
10EA
10EA
Front
Rear Sensor
Parking sensor
●Measuring the distance of Rear sensor
As the vehicle moves closer to an object the interval between beeps will shorten and each
segment will illuminate on the display.
Owner’s Manual
Warning
Depending on the size and shape of the object at the rear of the vehicle, the actual
distance the sensors initially detect may be shorter.
Step 1 Infinite ~ 3m (Green)
L
Sensor OFF
R
Sensor OFF
R
Sensor OFF
R
Step 2 3m ~ 2m (Yellow)
L
Step 3 2m ~ 1m (Orange)
L
Step 4 1m ~ 0.45m (Red 1ea)
L
R
Sensor OFF
Step 5 0.45 m ~ 0m (Red 2ea)
L
R
Sensor OFF
If required, the reverse sensor can be turned off by pressing the Sensor OFF button.
●Disclaimer
1. Parking sensors are designed to assist the driver whilst reversing.
It is the driver’s responsibility to maintain safe reverse parking practices.
2. The driver should react promptly to alerts from this unit.
3. Isuzu Australia Limited(IAL) does not guarantee or assume liability for damage or loss of sensors.
4. In no event shall IAL or it’s supplier be liable for any incidental, special, indirect,
or consequential damages(including any vehicle repairs or damages allegedly
caused by or associated with this product)whether resulting from the use, misuse,
or inability to use this product or from defects in the product.
Part Number 92956591
Back
Contents
Module x 1
Rear Sensor
Contents
Sensor x 4 / grommet x 8
Rivet x 8
Owner’s Manual x 1
The rear sensors will begin operating by placing the vehicle into reverse gear.
If the vehicle is fitted with both rear camera and reverse sensors, the reverse sensor
indicator is displayed at the bottom of the screen.
A vehicle with reverse sensor only, reverse sensor indicator is displayed at the top of
the screen.
■A vehicle with a rear camera and parking sensor installed.
Sensor harness x 1
20M harness x 1
Installation guide x 1
Rubber gasket x 4
Bracket x 4
1.6M Radio extension cable x 1
P Clamp x 4
■A vehicle with parking sensor only.
(Optional)
3M Velcro
adhesive
Battery
removal
toolxx11
(For control box fitting)
Cable Tie & Screw
20M harness x 1
16EA
16EA
10EA
10EA
Front
Rear Sensor
Parking sensor
●Measuring the distance of Rear sensor
As the vehicle moves closer to an object the interval between beeps will shorten and each
segment will illuminate on the display.
Owner’s Manual
Warning
Depending on the size and shape of the object at the rear of the vehicle, the actual
distance the sensors initially detect may be shorter.
Step 1 Infinite ~ 3m (Green)
L
Sensor OFF
R
Sensor OFF
R
Sensor OFF
R
Step 2 3m ~ 2m (Yellow)
L
Step 3 2m ~ 1m (Orange)
L
Step 4 1m ~ 0.45m (Red 1ea)
L
R
Sensor OFF
Step 5 0.45 m ~ 0m (Red 2ea)
L
R
Sensor OFF
If required, the reverse sensor can be turned off by pressing the Sensor OFF button.
●Disclaimer
1. Parking sensors are designed to assist the driver whilst reversing.
It is the driver’s responsibility to maintain safe reverse parking practices.
2. The driver should react promptly to alerts from this unit.
3. Isuzu Australia Limited(IAL) does not guarantee or assume liability for damage or loss of sensors.
4. In no event shall IAL or it’s supplier be liable for any incidental, special, indirect,
or consequential damages(including any vehicle repairs or damages allegedly
caused by or associated with this product)whether resulting from the use, misuse,
or inability to use this product or from defects in the product.
Part Number 92956591
Back
Contents
Module x 1
Rear Sensor
Contents
Sensor x 4 / grommet x 8
Rivet x 8
Owner’s Manual x 1
The rear sensors will begin operating by placing the vehicle into reverse gear.
If the vehicle is fitted with both rear camera and reverse sensors, the reverse sensor
indicator is displayed at the bottom of the screen.
A vehicle with reverse sensor only, reverse sensor indicator is displayed at the top of
the screen.
■A vehicle with a rear camera and parking sensor installed.
Sensor harness x 1
20M harness x 1
Installation guide x 1
Rubber gasket x 4
Bracket x 4
1.6M Radio extension cable x 1
P Clamp x 4
■A vehicle with parking sensor only.
(Optional)
3M Velcro
adhesive
Battery
removal
toolxx11
(For control box fitting)
Cable Tie & Screw
20M harness x 1
16EA
16EA
10EA
10EA
Front
Rear Sensor
Parking sensor
●Measuring the distance of Rear sensor
As the vehicle moves closer to an object the interval between beeps will shorten and each
segment will illuminate on the display.
Owner’s Manual
Warning
Depending on the size and shape of the object at the rear of the vehicle, the actual
distance the sensors initially detect may be shorter.
Step 1 Infinite ~ 3m (Green)
L
Sensor OFF
R
Sensor OFF
R
Sensor OFF
R
Step 2 3m ~ 2m (Yellow)
L
Step 3 2m ~ 1m (Orange)
L
Step 4 1m ~ 0.45m (Red 1ea)
L
R
Sensor OFF
Step 5 0.45 m ~ 0m (Red 2ea)
L
R
Sensor OFF
If required, the reverse sensor can be turned off by pressing the Sensor OFF button.
●Disclaimer
1. Parking sensors are designed to assist the driver whilst reversing.
It is the driver’s responsibility to maintain safe reverse parking practices.
2. The driver should react promptly to alerts from this unit.
3. Isuzu Australia Limited(IAL) does not guarantee or assume liability for damage or loss of sensors.
4. In no event shall IAL or it’s supplier be liable for any incidental, special, indirect,
or consequential damages(including any vehicle repairs or damages allegedly
caused by or associated with this product)whether resulting from the use, misuse,
or inability to use this product or from defects in the product.
Part Number 92956591
Back
Contents
Module x 1
Rear Sensor
Contents
Sensor x 4 / grommet x 8
Rivet x 8
Owner’s Manual x 1
The rear sensors will begin operating by placing the vehicle into reverse gear.
If the vehicle is fitted with both rear camera and reverse sensors, the reverse sensor
indicator is displayed at the bottom of the screen.
A vehicle with reverse sensor only, reverse sensor indicator is displayed at the top of
the screen.
■A vehicle with a rear camera and parking sensor installed.
Sensor harness x 1
20M harness x 1
Installation guide x 1
Rubber gasket x 4
Bracket x 4
1.6M Radio extension cable x 1
P Clamp x 4
■A vehicle with parking sensor only.
(Optional)
3M Velcro
adhesive
Battery
removal
toolxx11
(For control box fitting)
Cable Tie & Screw
20M harness x 1
16EA
16EA
10EA
10EA
Front
Rear Sensor
Parking sensor
●Measuring the distance of Rear sensor
As the vehicle moves closer to an object the interval between beeps will shorten and each
segment will illuminate on the display.
Owner’s Manual
Warning
Depending on the size and shape of the object at the rear of the vehicle, the actual
distance the sensors initially detect may be shorter.
Step 1 Infinite ~ 3m (Green)
L
Sensor OFF
R
Sensor OFF
R
Sensor OFF
R
Step 2 3m ~ 2m (Yellow)
L
Step 3 2m ~ 1m (Orange)
L
Step 4 1m ~ 0.45m (Red 1ea)
L
R
Sensor OFF
Step 5 0.45 m ~ 0m (Red 2ea)
L
R
Sensor OFF
If required, the reverse sensor can be turned off by pressing the Sensor OFF button.
●Disclaimer
1. Parking sensors are designed to assist the driver whilst reversing.
It is the driver’s responsibility to maintain safe reverse parking practices.
2. The driver should react promptly to alerts from this unit.
3. Isuzu Australia Limited(IAL) does not guarantee or assume liability for damage or loss of sensors.
4. In no event shall IAL or it’s supplier be liable for any incidental, special, indirect,
or consequential damages(including any vehicle repairs or damages allegedly
caused by or associated with this product)whether resulting from the use, misuse,
or inability to use this product or from defects in the product.
Part Number 92956591
Back
Contents
Module x 1
Rear Sensor
Contents
Sensor x 4 / grommet x 8
Rivet x 8
Owner’s Manual x 1
The rear sensors will begin operating by placing the vehicle into reverse gear.
If the vehicle is fitted with both rear camera and reverse sensors, the reverse sensor
indicator is displayed at the bottom of the screen.
A vehicle with reverse sensor only, reverse sensor indicator is displayed at the top of
the screen.
■A vehicle with a rear camera and parking sensor installed.
Sensor harness x 1
20M harness x 1
Installation guide x 1
Rubber gasket x 4
Bracket x 4
1.6M Radio extension cable x 1
P Clamp x 4
■A vehicle with parking sensor only.
(Optional)
3M Velcro
adhesive
Battery
removal
toolxx11
(For control box fitting)
Cable Tie & Screw
20M harness x 1
16EA
16EA
10EA
10EA
Download PDF