AEG F88060VI0P

FAVORIT 88060 VI
DISHWASHER
USER MANUAL
2
CONTENTS
4
6
7
8
10
12
15
18
19
21
SAFETY INFORMATION
PRODUCT DESCRIPTION
CONTROL PANEL
PROGRAMMES
OPTIONS
BEFORE FIRST USE
DAILY USE
CARE AND CLEANING
TROUBLESHOOTING
TECHNICAL INFORMATION
ENVIRONMENT CONCERNS
Recycle the materials with the symbol
. Put the packaging in applicable
containers to recycle it.
Help protect the environment and human health and to recycle waste of electrical
and electronic appliances. Do not dispose appliances marked with the symbol
with the household waste. Return the product to your local recycling facility or
contact your municipal office.
VISIT OUR WEBSITE FOR:
- Products
- Brochures
- User manuals
- Trouble shooter
- Service information
www.aeg.com
LEGEND
Warning - Important Safety information.
General information and tips
Environmental information
Subject to change without notice
ENGLISH
3
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler – features you might not find on ordinary appliances. Please spend
a few minutes reading to get the very best from it.
ACCESSORIES AND CONSUMABLES
In the AEG webshop, you’ll find everything you need to keep all your AEG
appliances looking spotless and working perfectly. Along with a wide range of
accessories designed and built to the high quality standards you would expect, from
specialist cookware to cutlery baskets, from bottle holders to delicate laundry bags…
Visit the webshop at:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate.
Model
PNC
Serial Number
4
SAFETY INFORMATION
Before the installation and use of the
appliance, carefully read the supplied
instructions. The manufacturer is not responsible if an incorrect installation and
use causes injuries and damages. Always keep the instructions with the appliance for future reference.
CHILDREN AND VULNERABLE
PEOPLE SAFETY
WARNING!
Risk of suffocation, injury or permanent disability.
• Do not let persons, children included, with reduced physical sensory,
reduced mental functions or lack of
experience and knowledge use the
appliance. They must have supervision or instruction for the operation
of the appliance by a person who is
responsible for their safety. Do not
let children play with the appliance.
• Keep all packaging away from children. There is the risk of suffocation
and injury.
• Keep all detergents away from children.
• Keep children and pets away from
the appliance door when it is open.
INSTALLATION
WARNING!
This appliance must be installed
by a qualified or competent person.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Do not install or use the appliance
where the temperature is less than 0
°C.
• Obey the installation instruction supplied with the appliance.
• Make sure that the appliance is installed below and adjacent to safe
structures.
Water connection
• Make sure not to cause damage to
the water hoses.
• Before you connect the appliance to
new pipes or pipes not used for a
long time, let the water flow until it is
clean.
• The first time you use the appliance,
make sure that there is no leakage.
•
WARNING!
Dangerous voltage.
The water inlet hose has a safety
valve and a sheath with an inner
mains cable.
• If the water inlet hose is damaged,
immediately disconnect the mains
plug from the mains socket. Contact
Service to replace the water inlet
hose.
Electrical connection
WARNING!
Risk of fire and electrical shock.
• The appliance must be earthed.
• Make sure that the electrical information on the rating plate agrees with
the power supply. If not, contact an
electrician.
• Always use a correctly installed
shockproof socket.
• Do not use multi-plug adapters and
extension cables. There is a risk of
fire.
• Make sure not to cause damage to
the mains plug and to the mains ca-
ENGLISH
ble. Contact Service or an electrician
to change a damaged mains cable.
• Connect the mains plug to the mains
socket only at the end of the installation. Make sure that there is access
to the mains plug after the installation.
• Do not pull the mains cable to disconnect the appliance. Always pull
the mains plug.
• Only for UK and Ireland. The appliance has a 13 amp mains plug. If it is
necessary to change the fuse in the
mains plug, use a 13 amp ASTA (BS
1362) fuse.
5
completed. There can be detergent
on the dishes.
WARNING!
Risk of electrical shock, fire or
burns.
• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
• Do not use water spray and steam to
clean the appliance.
• The appliance can release hot steam
if you open the door while a programme operates.
INTERNAL LIGHT
USE
WARNING!
Risk of injury.
• Use this appliance in a household environment.
• Do not change the specification of
this appliance.
• Put knives and cutlery with sharp
points in the cutlery basket with the
points down or in a horizontal position.
• Do not keep the appliance door
open without supervision to prevent
to fall on it.
• Do not sit or stand on the open door.
• Dishwasher detergents are dangerous. Obey the safety instructions on
the detergent packaging.
• Do not drink and play with the water
in the appliance.
• Do not remove the dishes from the
appliance until the programme is
WARNING!
Risk of injury.
Visible LED radiation, do not
look directly into the beam.
The LED is CLASS 2 and agrees with
IEC 60825-1: 1993 + A1:1997 + A2:2001.
Emission wave length: 450 nm
Maximum emitted power: 548 μW
To replace the internal light, contact
Service.
DISPOSAL
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the
mains supply.
• Cut off the mains cable and dispose
of it.
• Remove the door catch to prevent
children and pets to get closed in the
appliance.
6
PRODUCT DESCRIPTION
1
2
3
12
11
10
9
8
7
6 5
4
1 Top spray arm
2 Upper spray arm
7 Water hardness dial
8 Rinse aid dispenser
3 Lower spray arm
4 Filters
9 Detergent dispenser
10 Cutlery basket
5 Rating plate
6 Salt container
11 Lower basket
12 Upper basket
TIME BEAM
Time Beam is a light beam that shows,
on the kitchen floor:
• The programme duration. It decreases with steps of one minute.
• The end of the programme (0:00).
• The time of the delay start. It decreases with steps of one hour (24h,
23h...).
• Alarm codes.
ENGLISH
CONTROL PANEL
1
2
3
4
5
6
7
8
9
1 On/off button
2 Display
6 ÖKO PLUS touchpad
7 Multitab touchpad
3 Delay touchpad
4 Programme touchpad
8 RESET touchpad
9 Indicators
5 ExtraHygiene touchpad
Indicators
Salt indicator. This indicator is off while the programme operates.
Rinse aid indicator. This indicator is off while the programme operates.
End indicator.
7
8
PROGRAMMES
Programme
Type of soil
Type of load
1
All
Prewash
Crockery, cutlery, Wash 45 °C or 70 °C
pots and pans
Rinses
Dry
ExtraHygiene
ÖKO PLUS
Heavy soil
Prewash
Crockery, cutlery, Wash 70 °C
pots and pans
Rinses
Dry
ÖKO PLUS
1)
2
2)
3
Programme phases
Options
3)
Normal soil
Crockery and
cutlery
Prewash
Wash 50 °C
Rinses
Dry
Wash 60 °C
Rinse
ExtraHygiene
4)
Fresh soil
Crockery and
cutlery
Normal soil
Crockery and
cutlery
Prewash
Wash 50 °C
Rinses
Dry
ExtraHygiene
ÖKO PLUS
6
Light soil
Crockery and
cutlery
Wash 55 °C
Rinses
ExtraHygiene
7
Normal or light
Wash 45 °C
soil
Rinses
Delicate crockery Dry
and glassware
8
All
4
5
5)
ÖKO PLUS
Prewash
6)
1) The appliance senses the type of soil and the quantity of items in the baskets. It
automatically adjusts the temperature and quantity of the water, the energy consumption
and the programme duration.
2) This programme includes the ExtraHygiene option.
3) This is the most silent washing programme. The pump works at a very low speed to
decrease the level of noise. Because of the low speed, the programme duration is long.
4) With this programme you can wash a load with fresh soil. It gives good washing results in a
short time.
5) This is the standard programme for test institutes. With this programme you have the most
efficient use of water and energy consumption for crockery and cutlery with normal soil.
Refer to the supplied leaflet for test information.
6) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond
on the dishes and bad odours to come out from the appliance.
Do not use detergent with this programme.
ENGLISH
Consumption values
Programme 1)
Duration (min)
Energy (kWh)
Water (l)
1
90 - 160
0.9 - 1.7
8 - 15
2
140 - 160
1.4 - 1.6
13 - 14
3
200 - 220
1.1 - 1.2
9 - 11
4
30
0.8
9
5
160 - 170
0.9 - 1.0
9 - 11
6
50 - 60
1.0 - 1.1
10 - 11
7
70 - 80
0.8 - 0.9
11 - 12
8
14
0.1
4
1) The water pressure and temperature, the variations of the mains supply, the options and
the quantity of dishes can change the programme duration and the consumption values.
9
10
OPTIONS
MULTITAB FUNCTION
ÖKO PLUS
Activate this function only when you
use the combi detergent tablets.
This function deactivates the flow of
rinse aid and salt. The related indicators
are off.
The programme duration can increase.
This function decreases the temperature in the drying phase. The energy
consumption decreases by 25%.
The dishes can be wet at the end of the
programme. We recommend that you
keep the door ajar and let the dishes
dry.
Activating the multitab function
Activate or deactivate the multitab function before the start of a
programme. You cannot activate or deactivate this function
when a programme operates.
1. Press the on/off button to activate
the appliance.
2. Make sure that the appliance is in
setting mode. Refer to ‘SETTING
AND STARTING A PROGRAMME'.
3. Press the multitab touchpad, the
multitab indicator comes on.
The function stays on until you
deactivate it. Press the multitab
touchpad, the multitab indicator
goes off.
If you stop to use the combi
detergent tablets, before you start
to use separately detergent, rinse aid
and dishwasher salt, do these steps:
1. Deactivate the multitab function.
2. Set the water softener to the highest level.
3. Make sure that the salt container
and the rinse aid dispenser are full.
4. Start the shortest programme with a
rinsing phase, without detergent
and without dishes.
5. Adjust the water softener to the water hardness in your area.
6. Adjust the released quantity of rinse
aid.
EXTRAHYGIENE
This function gives better results for the
hygiene. During the rinsing phase, the
temperature stays at 70 °C for 10 to 14
minutes.
ACOUSTIC SIGNALS
The acoustic signals operate in these
conditions:
• The programme is completed.
• The level of the water softener is adjusted electronically.
• The appliance has a malfunction.
Factory setting: on. You can deactivate the acoustic signals.
Deactivating the acoustic signals
1. Press the on/off button to activate
the appliance.
2. Make sure that the appliance is in
setting mode. Refer to ‘SETTING
AND STARTING A PROGRAMME’.
3. Press and hold touchpads (4) and
(5) at the same time until the indicators of touchpads (3), (4), (5) and (6)
flash.
4. Press touchpad (5),
• The indicators of touchpads (3),
(4) and (6) go off.
• The indicator of touchpad (5)
continues to flash.
• The display shows the setting of
the acoustic signals.
On
Off
ENGLISH
5. Press touchpad (5) to change the
setting
6. Deactivate the appliance to confirm.
SETTING THE TIME BEAM
COLOUR
Nine colours are available for this light
beam. You can change the colour or
deactivate it.
1. Press the on/off button to activate
the appliance.
2. Make sure that the appliance is in
setting mode. Refer to ‘SETTING
AND STARTING A PROGRAMME’.
3. Press and hold touchpads (4) and
(5) at the same time until the indica-
11
tors of touchpads (3), (4), (5) and (6)
flash.
4. Press touchpad (6).
• The indicators of touchpads (3),
(4) and (5) go off.
• The indicator of touchpad (6)
continues to flash.
• The display shows a number and
the letter C. Each number is related to a different colour (0C =
Time Beam deactivated).
5. Press touchpad (6) again and again
to change the colour.
6. Deactivate the appliance to confirm.
12
BEFORE FIRST USE
1. Make sure that the set level of the
water softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your local water authority to know the water hardness in your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the
appliance. Start a programme to remove them. Do not use detergent
and do not load the baskets.
ADJUSTING THE WATER
SOFTENER
Hard water contains a high quantity of
minerals that can cause damage to the
appliance and bad washing results. The
water softener neutralises these minerals.
The dishwasher salt keeps the water
softener clean and in good conditions.
Refer to the table to adjust the water
softener to the right level. It makes sure
that the water softener uses the correct
quantity of dishwasher salt and water.
If you use the combi detergent
tablets, activate the multitab
function. These tablets contain
detergent, rinse aid and other
added agents. Be sure that
these tablets are applicable to
the water hardness in your area.
Refer to the instructions on the
packaging of the products.
You must adjust the water softener manually and electronically.
Water softener
adjustment
Water hardness
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l
Clarke
degrees
Manual
Electronic
51 - 70
91 - 125
9.1 - 12.5
64 - 88
2 1)
10
43 - 50
76 - 90
7.6 - 9.0
53 - 63
2 1)
9
37 - 42
65 - 75
6.5 - 7.5
46 - 52
21)
8
29 - 36
51 - 64
5.1 - 6.4
36 - 45
21)
7
23 - 28
40 - 50
4.0 - 5.0
28 - 35
21)
6
19 - 22
33 - 39
3.3 - 3.9
23 - 27
21)
51)
15 - 18
26 - 32
2.6 - 3.2
18 - 22
1
4
11 - 14
19 - 25
1.9 - 2.5
13 - 17
1
3
4 - 10
7 - 18
0.7 - 1.8
5 - 12
1
2
<4
<7
< 0.7
<5
12)
12)
1) Factory position.
2) Do not use salt at this level.
ENGLISH
13
Manual adjustment
Turn the water hardness dial to the position 1 or 2.
Electronic adjustment
1. Press the on/off button to activate
the appliance.
2. Make sure that the appliance is in
setting mode. Refer to ‘SETTING
AND STARTING A PROGRAMME’.
3. Press and hold touchpads (4) and
(5) at the same time until the indicators of touchpads (3), (4), (5) and (6)
flash.
4. Press touchpad (3).
• The indicators of touchpads (4),
(5) and (6) go off.
• The indicator of touchpad (3)
continues to flash.
• The acoustic signals operate. Example: five intermittent acoustic
signals = level 5.
• The display shows the setting of
the water softener. Example:
= level 5.
5. Press touchpad (3) again and again
to change the setting.
6. Deactivate the appliance to confirm.
FILLING THE SALT CONTAINER
CAUTION!
Only use dishwasher salt. Other
products can cause damage to
the appliance.
Water and salt can come out
from the salt container when
you fill it. Risk of corrosion. To
prevent it, after you fill the salt
container, start a programme.
1. Turn the cap counterclockwise and
open the salt container.
2. Put 1 litre of water in the salt container (only for the first time).
3. Fill the salt container with dishwasher salt.
4. Remove the salt around the opening of the salt container.
5. Turn the cap clockwise to close the
salt container.
14
FILLING THE RINSE AID DISPENSER
CAUTION!
Only use rinse aid for dishwashers. Other products can cause
damage to the appliance.
B
A
M AX
4
3 2
The rinse aid, during the last
rinsing phase, helps to dry the
dishes without streaks and
stains.
1
+
-
C
D
1. Press the release button (D) to
open the lid (C).
2. Fill the rinse aid dispenser (A), no
more than the mark 'max'.
3. Remove the spilled rinse aid with
an absorbent cloth to prevent too
much foam.
4. Close the lid. Make sure that the
release button locks into position.
You can turn the selector of the
released quantity (B) between
position 1 (lowest quantity) and
position 4 (highest quantity).
ENGLISH
15
DAILY USE
1. Open the water tap.
2. Press the on/off button to activate
the appliance. Make sure that the
appliance is in setting mode. Refer
to ’SETTING AND STARTING A
PROGRAMME’.
• If the salt indicator is on, fill the
salt container.
• If the rinse aid indicator is on, fill
the rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme for the type of load and
soil.
LOADING THE BASKETS
Refer to the supplied leaflet with
examples of the load of the baskets.
• Only use the appliance to wash items
that are dishwasher-safe.
• Do not put in the appliance items
made of wood, horn, aluminium,
pewter and copper.
• Do not put in the appliance items
that can absorb water (sponges,
household cloths).
• Remove remaining food from the
items.
• Make soft the remaining burned food
on the items.
• Put hollow items (cups, glasses and
pans) with the opening down.
• Make sure that cutlery and dishes do
not bond together. Mix spoons with
other cutlery.
• Make sure that glasses do not touch
other glasses.
• Put small items in the cutlery basket.
• Put light items in the upper basket.
Make sure that the items do not
move.
• Make sure that the spray arms can
move freely before you start a programme.
16
USING THE DETERGENT
A
CAUTION!
Use only detergents for dishwashers.
B
30
4
MAX
+
32
-
1
20
C
1. Press the release button (B) to
open the lid (C).
2. Put the detergent in the compartment (A) .
3. If the programme has a prewash
phase, put a small quantity of detergent on the inner part of the appliance door.
4. If you use detergent tablets, put
the tablet in the compartment (A).
5. Close the lid. Make sure that the
release button locks into position.
Do not use more than the correct quantity of detergent. Refer
to the instructions on the detergent packaging.
Detergent tablets do not fully
dissolve with short programmes
and detergent residues can stay
on the dishes.
We recommend that you use
detergent tablets with long programmes.
SETTING AND STARTING A
PROGRAMME
Setting mode
The appliance must be in setting mode
to accept some operations.
The appliance is in setting mode when,
after the activation:
• The display shows two horizontal status bars.
If the control panel shows other conditions, press RESET until the appliance is
in setting mode.
Starting a programme without
delay start
1. Open the water tap.
2. Press the on/off button to activate
the appliance. Make sure that the
appliance is in setting mode.
3. Set the programme.
• The related programme number
flashes in the display.
4. If you want, you can set the options.
5. Close the appliance door. The programme starts.
• The display goes off. If you open
the door while the appliance operates, the display shows the programme duration that decreases
with steps of 1 minute.
Starting a programme with
delay start
1. Set the programme.
ENGLISH
2. Press the delay touchpad again and
again until the display shows the delay time you want to set (from 1 to
24 hours).
• The delay time flashes in the display.
• The delay indicator is on.
3. Close the appliance door. The
countdown starts.
• If you open the door, the display
shows the countdown of the delay start that decreases with steps
of 1 hour.
• When the countdown is completed,
the programme starts.
Opening the door while the
appliance operates
If you open the door, the appliance
stops. When you close the door, the
appliance continues from the point of
interruption.
Cancelling the delay start while
the countdown operates
1. Open the appliance door.
2. Press the delay touchpad again and
again until the display shows the
programme number.
3. Close the appliance door. The programme starts.
Cancelling the programme
Press RESET until:
• The display shows two horizontal status bars.
17
Make sure that there is detergent in the detergent dispenser
before you start a new programme.
At the end of the programme
When the programme is completed, an
intermittent acoustic signal operates.
1. Open the appliance door.
• The end indicator is on.
• The display shows 0.
2. Press the on/off button to deactivate the appliance.
3. Close the water tap.
If you do not press the on/off
button, the AUTO OFF device
automatically deactivates the
appliance after some minutes.
This helps to decrease the energy consumption.
• For better drying results, keep the
appliance door ajar for some minutes.
• Let the dishes become cold before
you remove them from the appliance. Hot dishes can be easily damaged.
• First remove the items from the lower
basket, then from the upper basket.
There can be water on the sides
and on the door of the appliance. Stainless steel becomes
cool more quickly than the
dishes.
18
CARE AND CLEANING
WARNING!
Before maintenance, deactivate the appliance and disconnect the mains plug
from the mains socket.
Dirty filters and clogged spray
arms decrease the washing results.
Make a check regularly and, if
necessary, clean them.
CLEANING THE FILTERS
C
C
A
B
A1
A2
CLEANING THE SPRAY ARMS
Do not remove the spray arms.
If the holes in the spray arms are clogged, remove remaining parts of soil
with a thin pointed object.
EXTERNAL CLEANING
Clean the appliance with a moist soft
cloth.
1. Turn the filter (A) counterclockwise and remove it.
2. To disassemble the filter (A),
pull apart (A1) and (A2).
3. Remove the filter (B).
4. Wash the filters with water.
5. Put the filter (B) to its initial
position. Make sure that it
assembles correctly under
the two guides (C).
6. Assemble the filter (A) and
put it into position in filter
(B). Turn it clockwise until it
locks.
An incorrect position of
the filters can cause bad
washing results and damage to the appliance.
Only use neutral detergents. Do not
use abrasive products, abrasive cleaning pads or solvents.
ENGLISH
19
TROUBLESHOOTING
The appliance does not start or it stops
during operation.
First try to find a solution to the problem (refer to the table). If not, contact
Service.
With some problems, the display
shows an alarm code:
•
- The appliance does not fill with
water.
•
- The appliance does not drain
the water.
•
- The anti-flood device is on.
WARNING!
Deactivate the appliance before
you make the checks.
Problem
Possible cause
Possible solution
The programme
does not start.
The mains plug is not connected in the mains socket.
Connect the mains plug.
The appliance door is open. Close the appliance door.
The appliance does
not fill with water.
The appliance does
not drain the water.
The fuse in the fuse box is
damaged.
Replace the fuse.
The delay start is set.
Cancel the delay start or
wait for the end of the
countdown.
The water tap is closed.
Open the water tap.
The water pressure is too
low.
Contact your local water authority.
The water tap is clogged or
there is limescale on it.
Clean the water tap.
The filter in the water inlet
hose is clogged.
Clean the filter.
The water inlet hose has a
kink or a bend.
Make sure that the position
of the hose is correct.
The anti-flood device is on.
There are water leakages in
the appliance.
Close the water tap and
contact Service.
The sink spigot is clogged.
Clean the sink spigot.
The water drain hose has a
kink or a bend.
Make sure that the position
of the hose is correct.
After the checks are completed, activate the appliance. The programme
continues from the point of interruption.
If the problem occurs again, contact
Service.
If the display shows other alarm codes,
contact Service.
20
THE WASHING RESULTS AND DRYING RESULTS ARE NOT
SATISFACTORY
Problem
Possible cause
Possible solution
The dishes are not
clean.
The filters are clogged.
Clean the filters.
The filters are not correctly
assembled and installed.
Make sure that the filters are
correctly assembled and installed.
The spray arms are clogged.
Remove remaining soil with a
thin pointed object.
The programme was not
applicable for the type of
load and soil.
Make sure that the programme is applicable for the
type of load and soil.
Incorrect position of the
items in the baskets. Water
could not wash all items.
Make sure that the position
of the items in the baskets is
correct and that the water
can easily wash all items.
The spray arms could not
turn freely.
Make sure that the position
of the items in the baskets is
correct and does not cause
the blockage of the spray
arms.
The quantity of detergent
was not sufficient.
Make sure that you add the
correct quantity of detergent
in the dispenser before you
start a programme.
There was no detergent in
the detergent dispenser.
Make sure that you add detergent in the dispenser before you start a programme.
The salt container is empty.
Make sure that there is dishwasher salt in the salt container.
The set level of the water
softener is incorrect.
Make sure that the set level
of the water softener agrees
with the water hardness in
your area.
The cap of the salt container is loose.
Tighten the cap.
The released quantity of
rinse aid is too much.
Decrease the released quantity of rinse aid .
Limescale particles
on the dishes.
Whitish streaks and
stains or bluish layers on glasses and
dishes.
ENGLISH
Problem
Dry water drop
stains on glasses
and dishes.
21
Possible cause
Possible solution
The quantity of detergent
was too much.
Make sure that you add the
correct quantity of detergent
in the dispenser before you
start a programme.
The released quantity of
rinse aid was not sufficient .
Increase the released quantity of rinse aid.
The quality of the detergent Try a different brand of decan be the cause.
tergent.
The dishes are wet.
• The programme had no
drying phase.
• The programme had a
low temperature drying
phase.
For better drying results,
keep the door ajar for some
minutes.
The dishes are wet
and matt.
The rinse aid dispenser is
empty.
Make sure that there is rinse
aid in the rinse aid dispenser.
The quality of the rinse aid
can be the cause.
Try a different brand of rinse
aid.
The quality of the combi
detergent tablets can be
the cause.
• Try a different brand of
combi detergent tablets.
• Activate the rinse aid dispenser and use the rinse
aid together with the combi detergent tablets.
Activating the rinse aid
dispenser with the multitab
function activated
1. Press the on/off button to activate
the appliance.
2. Make sure that the appliance is in
setting mode. Refer to ‘SETTING
AND STARTING A PROGRAMME’.
3. Press and hold touchpads (4) and
(5) at the same time until the indicators of touchpads (3), (4), (5) and (6)
flash.
4. Press touchpad (4).
• The indicators of touchpads (3),
(5) and (6) go off.
• The indicator of touchpad (4)
continues to flash.
• The display shows the setting of
the rinse aid dispenser.
Off
On
5. Press touchpad (4) to change the
setting.
6. Deactivate the appliance to confirm.
7. Adjust the released quantity of rinse
aid.
8. Fill the rinse aid dispenser.
TECHNICAL INFORMATION
Dimensions
Width / Height / Depth (mm)
Electrical connection
Refer to the rating plate.
Water supply pressure
Min. / max. (bar / MPa)
596 / 818 - 898 / 550
(0.5 / 0.05 ) / (8 / 0.8 )
22
Water supply 1)
Cold water or hot water2)
Capacity
Place settings
max. 60 °C
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian
energy), use the hot water supply to decrease energy consumption.
12
ENGLISH
23
www.aeg.com/shop
117931990-A-192011