Philips CSS5123/12 User manual

Philips CSS5123/12 User manual
Register your product and get support at
www.philips.com/welcome
CSS5123
EN User manual
NL Gebruiksaanwijzing
DA Brugervejledning
NOBrukerhåndbok
DE Benutzerhandbuch
PT Manual do utilizador
EL Εγχειρίδιο χρήσης
SV Användarhandbok
ES Manual del usuario
TR Kullanım kılavuzu
FI
Käyttöopas
FR Mode d’emploi
IT Manuale utente
1 Help and support
4
4
4
2Notice
4
4
4
5
5
5
FAQs
Contact Philips
Copyright
Compliance
Mains fuse (UK only)
Open source software
Trademarks
3Important
Safety
Care for your product
Care of the environment
6
6
7
7
4 Your SoundBar
7
7
8
5 Connect your SoundBar
9
9
10
10
Main unit
Remote control
Subwoofer
Connectors
Connect to TV
Connect audio from TV and other devices
Computers and the Internet
Name your SoundBar
6 Use your SoundBar
Adjust the volume
Choose your sound
USB storage devices
Audio, video, and picture options
Use iPhone
Share media through SimplyShare
EasyLink
7 Change settings
22
22
23
24
24
24
24
25
8 Update software
25
25
25
26
9 Product specifications
26
10Troubleshooting
29
11Index
30
Picture
Sound
Language
Scan your USB storage device
DLNA DMR control
Energy saving
Apply factory settings
Check software version
Update software through the Internet
Update software through USB
English
Contents
11
12
14
14
14
14
15
16
17
19
21
EN
3
1 Help and support
2Notice
Download a software update and find answers to
many frequently answered questions (FAQs) on
your product at www.philips.com.
This section contains the legal and trademark
notices.
FAQs
If you have a problem, refer to the frequently
asked questions (FAQs) for this SoundBar at
www.philips.com/support.
If you still need help, contact Philips Consumer
Care in your country.
Warning
•• Do not attempt to repair your SoundBar
yourself. This may cause severe injury,
irreparable damage to your SoundBar, or void
your warranty.
Contact Philips
If you contact Philips, you will be asked for the
model and serial number of your product. The
model number and serial number are on the
back or bottom of your product. Note the
numbers before you call Philips:
Model No. __________________________
Serial No. ___________________________
Copyright
This item incorporates copy protection technology
that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are
prohibited.
Copyright in the UK
Recording and playback of material may require
consent. See Copyright Act 1956 and The
Performers Protection Acts 1958 to 1972.
Compliance
This product is in compliance with the essential
requirements and other relevant provisions of
Directives 2006/95/EC (Low Voltage), 2004/108/
EC (EMC).
* Wireless and Ethernet LAN functions are
authorized for indoor use only.
Hereby, Philips Consumer Lifestyle, declares that
this product is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC.
A copy of the EC declaration of Conformity
is available in the Portable Document Format
(PDF) version of the user manual at www.philips.com/support.
4
EN
This information applies only to products with a
UK mains plug.
This product is fitted with an approved molded
plug. If you replace the fuse, use one with:
• the ratings shown on the plug,
• a BS 1362 approval, and
• the ASTA approval mark.
Contact your dealer if you are not sure about
what type of fuse to use.
Caution: To conform with the EMC directive
(2004/108/EC), do not detach the plug from the
power cord.
Open source software
Philips Electronics Singapore Pte Ltd hereby
offers to deliver, upon request, a copy of the
complete corresponding source code for the
copyrighted open source software packages used
in this product for which such offer is requested
by the respective licenses. This offer is valid up
to three years after product purchase to anyone
in receipt of this information. To obtain source
code, please contact [email protected]
If you prefer not to use email or if you do not
receive confirmation receipt within a week after
mailing to this email address, please write to
“Open Source Team, Philips Intellectual Property
& Standards, P.O. Box 220, 5600 AE Eindhoven,
The Netherlands”. If you do not receive timely
confirmation of your letter, please email to the
email address above. The texts of the licenses
and acknowledgements for open source
software used in this product are included on a
separate leaflet.
English
Mains fuse (UK only)
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
DivX , DivX Certified , DivX Plus HD
and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used
under license.
ABOUT DIVX VIDEO: DivX is a digital video
format created by DivX, LLC, a subsidiary of Rovi
Corporation. This is an official DivX Certified
device that plays DivX video. Visit divx.com for
more information and software tools to convert
your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This
DivX Certified device must be registered
in order to play purchased DivX Video-onDemand (VOD) movies. To obtain your
registration code, locate the DivX VOD section
in your device setup menu. Go to vod.divx.com
for more information on how to complete your
registration.
HDMI, the HDMI logo, and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC in
the United States and other countries.
Trademarks
The Wi-Fi CERTIFIED Logo is a certification
mark of the Wi-Fi Alliance.
Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,487,535 & other
U.S. and worldwide patents issued & pending.
DTS, the Symbol, & DTS and the Symbol
together are registered trademarks & DTS
2.0+Digital Out is a trademark of DTS, Inc.
Product includes software. © DTS, Inc. All Rights
Reserved.
Android is a trademark of Google Inc. Use of this
trademark is subject to Google permissions.
DLNA , the DLNA Logo and DLNA CERTIFIED
are trademarks, service marks, or certification
marks of the Digital Living Network Alliance.
EN
5
3Important
Read and understand all instructions before you
use your SoundBar. If damage is caused by failure
to follow instructions, the warranty does not apply.
Safety
Risk of electric shock or fire!
• Never expose the product and accessories
to rain or water. Never place liquid
containers, such as vases, near the product.
If liquids are spilt on or into the product,
disconnect it from the power outlet
immediately. Contact Philips Consumer
Care to have the product checked before
use.
• Never place the product and accessories
near naked flames or other heat sources,
including direct sunlight.
•• Never insert objects into the ventilation
slots or other openings on the product.
•• Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
•• Disconnect the product from the power
outlet before lightning storms.
•• When you disconnect the power cord,
always pull the plug, never the cable.
Risk of short circuit or fire!
•• Before you connect the product to the
power outlet, ensure that the power
voltage matches the value printed on the
back or bottom of the product. Never
connect the product to the power outlet if
the voltage is different.
Risk of injury or damage to the SoundBar!
•• For wall-mountable products, use only the
supplied wall mount bracket. Secure the
wall mount to a wall that can support the
combined weight of the product and the
wall mount. Koninklijke Philips Electronics
N.V. bears no responsibility for improper
wall mounting that results in accident, injury
or damage.
•• Never place the product or any objects
on power cords or on other electrical
equipment.
6
EN
••
If the product is transported in
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet.
•• Parts of this product can be made of
glass. Handle with care to avoid injury and
damage.
Risk of overheating!
•• Never install this product in a confined
space. Always leave a space of at least four
inches around the product for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the product.
Risk of contamination!
• Do not mix batteries (old and new or
carbon and alkaline, etc.).
• Remove batteries if they are exhausted or
if the remote control is not to be used for a
long time.
• Batteries contain chemical substances, they
should be disposed of properly.
Risk of swallowing batteries!
• The product/remote control may contain a
coin type battery, which can be swallowed.
Keep the battery out of reach of children at
all times!
4 Your SoundBar
Use only microfiber cloth to clean the product.
Congratulations on your purchase, and welcome
to Philips! To fully benefit from the support that
Philips offers, register your SoundBar at www.
philips.com/welcome.
Care of the environment
English
Care for your product
Main unit
Your product is designed and manufactured with
high quality materials and components, which
can be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC. Please inform yourself about the local
separate collection system for electrical and
electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries because correct
disposal helps to prevent negative consequences
for the environmental and human health.
1
2
3
a Standby indicator
When the SoundBar is in standby, the
standby indicator turns red.
b Source indicator/ Volume indicator
Source indicator lights up when a source is
selected.
When you change volume, volume
indicators light up to indicate the volume
level.
• ARC: Lights up when you connect your
SoundBar to a TV through an HDMI
ARC connection.
• OPTICAL: Lights up when you select
Optical as the input source.
• AUX: Lights up when you select AUX
as the input source.
• COAXIAL: Lights up when you select
COAXIAL as the input source.
c Sound mode indicator/ Volume indicator
Sound mode indicator lights up when a you
play an audio source with surround sound.
When you change volume, volume
indicators light up to indicate the volume
level.
• DTS: Lights up when you play DTS
audio.Blinks when you press a remote
control button.
• DOLBY D: Lights up when you play
Dolby audio.
• V.SURR: Lights up when you select
Virtual Surround sound.
EN
7
Remote control
bUSB
Switch to USB storage device.
c
(Home)
Access the home menu.
dAUDIO
Select an audio language when you play a
video.
e Navigation buttons (
Navigate menus.
/
/
/
)
fOK
Confirm an entry or selection.
g
OPTIONS
Access more play options while playing a
multimedia file from a USB storage device
or PC (through DLNA).
h +/- (Volume)
Increase or decrease volume.
i
(Play)
Start or resume play.
j
(Pause)
Pause play.
k
/
(Fast Backward/ Fast Forward)
Search backwards or forward.
lZOOM
Zoom into a video scene or picture.
m TREBLE +/-
Increase or decrease treble.
n BASS +/-
Increase or decrease bass.
o SOUND SETTINGS
Toggle through sound modes.
pSURROUND
Toggle between stereo and virtual surround
sound.
qSUBTITLE
Select subtitle language for video.
r
a
8
(Standby-On)
Switch the SoundBar on or to standby.
When the SoundBar is in standby, the
standby indicator turns red.
• When EasyLink is enabled, press
and hold for at least three seconds
to switch all connected HDMI CEC
compliant devices to standby.
•
EN
/ (Previous/Next)
Skip to the previous or next track, chapter
or file.
s
(Stop)
Stop play.
t
(Mute)
Mute or restore volume.
u
BACK
Return to a previous menu screen.
Display information about the current
picture, audio, or video.
w AUDIO SOURCE
• AUX: Switch your audio source to the
•
•
AUX connection.
COAXIAL:Switch your audio source
to the coaxial connection.
OPTICAL: Switch your audio source
to the optical connection.
EasyLink controls
With Easylink, you can control your SoundBar,
TV and the connected devices with the standby
button on your SoundBar remote control.
•
(Standby-On): Press and hold to switch
your SoundBar, TV, and the connected
devices to standby.
5 Connect your
SoundBar
This section helps you connect your SoundBar to a
TV and other devices.
For information about the basic connections of
your SoundBar and accessories, see the quick start
guide. For a comprehensive interactive guide, see
www.connectivityguide.philips.com.
Note
•• For identification and supply ratings, refer to the
type plate at the back or bottom of the product.
•• Before you make or change any connections,
make sure that all devices are disconnected
from the power outlet.
Subwoofer
Follow the steps below to position and connect
your subwoofer.
Position
Place the subwoofer at least one meter (three
feet) away from your SoundBar, and ten
centimeters away from the wall.
For best results, place your subwoofer as shown
below.
Note
•• The SoundBar and the subwoofer
automatically pair up when you switch on the
SoundBar and the subwoofer.
EN
9
English
v INFO
Connectors
Connect to TV
Connect other devices to your SoundBar.
Connect your SoundBar to a TV to watch videos.
You can listen to audio from TV programs through
your SoundBar. Use the best quality connection
available on your SoundBar and TV.
Side left
Option 1: Connect to TV through HDMI
(ARC)
1
USB
Audio, video or picture input from a USB
storage device.
1
Back connectors
L
OPTICAL COAXIAL
DIGITAL IN
AC MAINS~
1
2
3
4
Your SoundBar supports HDMI version 1.4
- Audio Return Channel (ARC). If your TV is
HDMI ARC compliant, connect your SoundBar
to the TV through the HDMI ARC connection.
With HDMI ARC, you do not need an additional
audio cable to play audio from TV through your
SoundBar.
(Cable not supplied)
Using a High Speed HDMI cable, connect
the HDMI OUT (ARC) connector on your
SoundBar to the HDMI ARC connector on
the TV.
The HDMI ARC connector on the TV
might be labeled HDMI IN or HDMI. For
details on TV connectors, see the TV user
manual.
R
AUX
AUDIO IN
HDMI OUT (ARC)
LAN
5
6
7
a AC MAINS~
TV
Connect to the power supply.
b
•
•
(Standby-On)
Switch the SoundBar on or to standby.
When the SoundBar is in standby, the
standby indicator turns red.
c DIGITAL IN - OPTICAL
Connect to an optical audio output on the
TV or a digital device.
d DIGITAL IN - COAXIAL
Connect to a coaxial audio output on the
TV or a digital device.
e AUDIO IN - AUX
Connect to an analog audio output on the
TV or an analog device.
f HDMI OUT (ARC)
Connect to the HDMI input on the TV.
gLAN
Connect to the LAN input on a broadband
modem or router.
10
EN
2
3
On your TV, turn on HDMI-CEC. For
details, see the TV user manual.
If audio from TV does not play
automatically, set up the audio manually
(see ‘Set up audio for connected devices’ on
page 12).
Best quality video
If your TV is not HDMI ARC compliant, connect
your SoundBar to the TV through a standard
HDMI connection.
With a standard HDMI connection, you need an
additional audio cable to play the audio from the
TV through your SoundBar (see ‘Connect audio
from TV and other devices’ on page 11).
(Cable not supplied)
Using a High Speed HDMI cable, connect
the HDMI OUT (ARC) connector on your
SoundBar to the HDMI connector on the TV.
The HDMI connector on the TV might be
labeled HDMI IN.
1
TV
2
3
4
On your TV, turn on HDMI-CEC. For
details, see the TV user manual.
To play audio from TV programs through
your SoundBar, connect an additional audio
cable (see ‘Connect audio from TV and
other devices’ on page 11).
If audio from the TV does not play
automatically, set up the audio manually
(see ‘Set up audio for connected devices’ on
page 12).
Connect audio from TV and
other devices
Play audio from TV or other devices through your
SoundBar.
Use the best quality connection available on other
devices.
Note
•• The audio connections in this user manual are
only recommendations. You can use other
connections too.
•• When your SoundBar and TV are connected
through HDMI ARC, an audio connection is
not required.
Option 1: Connect audio through a digital
optical cable
Best quality audio
Using an optical cable, connect the OPTICAL
connector on your SoundBar to the OPTICAL
OUT connector on the device.
The digital optical connector might be labeled
SPDIF, SPDIF OUT, or OPTICAL.
(Cable not supplied)
TV
EN
11
English
Option 2: Connect to TV through HDMI
Option 2: Connect audio through a digital
coaxial cable
Good quality audio
Using a coaxial cable, connect the COAXIAL
connector on your SoundBar to the COAXIAL/
DIGITAL OUT connector on the device.
The digital coaxial connector might be labeled
DIGITAL AUDIO OUT.
(Cable not supplied)
Set up audio for connected devices
When you connect a device to your SoundBar,
check the audio settings.
On your TV and other devices, turn on
HDMI-CEC. For details, see the user
manual of the TV and the other device.
Select ‘Amplifier’ from the TV speakers
menu to hear sound from the SoundBar. For
details, see the TV user manual.
On your SoundBar, turn on System Audio
Control.
If the connected device is not HDMI-CEC
compliant, press the correct source button on
the remote control to select the audio input.
1
2
3
Computers and the Internet
Option 3: Connect audio through analog
audio cables
Basic quality audio
Using an analog cable, connect the AUX
connectors on your SoundBar to the audio
connectors on the device.
(Cable not supplied)
VCR
Connect your SoundBar to your computer
network and the internet, and enjoy:
• Multimedia content streamed from your
computer: Play music, photo, and video
from a computer (see ‘Browse PC from
SoundBar’ on page 19).
• Multimedia content streamed from your
mobile device or tablet:Play music, photo,
and video from a mobile device or other
media server on your network (see ‘Browse
a media server from mobile device’ on page
20).
• Software update:Update the SoundBar
software through the network (see ‘Update
software through the Internet’ on page 25).
Caution
•• Before you try to connect the SoundBar to a
computer network, familiarize yourself with
the network router, media server software
and networking principles. If necessary, read
documentation that accompanies the network
components. Philips is not responsible for lost,
damaged, or corrupt data.
12
EN
Wireless connection
Connect your SoundBar to your router through
a network cable.
What you need
• A network router (with DHCP enabled).
For best performance, coverage, and
compatibility, use 802.11n router.
• A network cable (RJ45 straight cable).
• Computer and mobile devices with media
server software installed.
• For software update, make sure that the
network router has access to the Internet,
and is not restricted by firewalls or other
security systems.
Connect your SoundBar to your router through
a wireless connection.
What you need
• A network router (with DHCP enabled).
For best wireless performance, coverage,
and compatibility, use 802.11n router.
• Computer and mobile devices with media
server software installed.
• For software update, make sure that the
network router has access to the Internet
and is not restricted by firewalls or other
security systems.
Set up the wired network
Your SoundBar has a built-in Wi-Fi for easy
access to the wireless network. Connect your
SoundBar to your router as shown below, and
then switch on the devices.
Connect your SoundBar to your router as shown
below, and then switch on the devices.
Set up the wireless network
LAN
1
2
3
4
5
6
Connect the SoundBar to a network router
through a wired connection.
Turn on your TV, and switch to the correct
source for the SoundBar.
Press (Home).
Select [Setup], and then press OK.
Select [Network] > [Ethernet], and then
press OK.
Follow the instructions on the TV to
complete the setup.
»» The SoundBar connects to the internet.
7
If connection fails, a failure message is
displayed on your TV. Press OK to return
to the previous menu, and then retry the
procedure.
1
Connect the SoundBar to a network router
through a wireless connection.
Turn on your TV, and switch to the correct
source for the SoundBar.
Press (Home).
Select [Setup], and then press OK.
Select [Network] > [Wireless], and then
press OK.
Follow the instructions on the TV to
complete the setup.
»» The SoundBar connects to the internet.
2
3
4
5
6
7
If connection fails, a failure message is displayed
on your TV. Press OK to return to the previous
menu, and then retry the procedure.
EN
13
English
Wired connection
Check network settings
1Press (Home).
2Select [Setup], and then press OK.
3Select [Network] > [Network Info], and
then press OK.
»» The current network settings are
displayed.
Name your SoundBar
To easily identify your SoundBar on a network,
name your SoundBar.
Turn on your TV, and switch to the correct
source for the SoundBar.
Press (Home).
Select [Setup], and then press OK.
Select [System] > [Device Name], and then
press OK.
»» A virtual keyboard is displayed on your
TV.
1
2
3
4
5Press Navigation buttons and OK to enter
6
the name.
Select [OK] on the virtual keyboard to exit.
6 Use your SoundBar
This section helps you use the SoundBar to play
media from a wide range of sources.
Before you start
• Make the necessary connections described
in the quick start guide
• Complete the first-time setup. First-time
setup appears when you turn on the
SoundBar for the first time. If you do not
complete the setup, you are prompted
to complete it each time you turn on the
SoundBar.
• Switch the TV to the correct source for the
SoundBar.
Adjust the volume
Your SoundBar has incremental volume control.
When you change volume or mute your SoundBar,
one or multiple Volume indicator light up to
indicate the volume level.
• To increase or decrease volume, press +/(Volume).
• To mute sound, press MUTE.
• To restore the sound, press MUTE again or
press +/- (Volume).
Choose your sound
This section helps you choose the ideal sound for
your video or music.
Sound mode
Select predefined sound modes to suit your
video or music.
Press SOUND SETTINGS repeatedly to
select a sound setting:
• [Auto]: Automatically select [Movie] or
[Music] based on the sound stream.
• [Movie]: Enjoy a cinematic audio
experience, specially enhanced for
movies.
• [Music]: Recreate the original
recording environment of your music,
in the studio or at a concert.
• [Original]: Experience the original
sound of your movies and music,
without added sound effects.
1
14
EN
2
[News]: Hear every word with
optimized speech and clear vocals.
• [Gaming]: Enjoy thrilling arcade sounds,
ideal for action-packed video games or
loud parties.
Press OK to confirm.
Auto volume
Turn the auto volume on to keep the volume
constant when you switch to a different source.
Press (Home).
Select [Setup], and then press OK.
Press the Navigation buttons (up/down) to
select [Audio] > [Auto Volume] > [On].
Press OK to confirm.
1
2
3
4
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
Press SURROUND repeatedly to select a
surround mode.
• [Virtual Surround]: Creates a highly
compelling 5.1 channel listening
experience. The sound mode indicator
on the main unit lights up.
• [Stereo]: Two-channel stereo sound.
Ideal for listening to music.
1
Equalizer
Change the high frequency (treble) and low
frequency (bass) settings of the SoundBar.
Press TREBLE +/- or BASS +/- to change the
frequency.
The DTS indicator lights up for one second
when treble or bass is set to the maximum or
minimum value.
Synchronize picture and sound
If the audio and video are not synchronized,
delay the audio to match the video.
Press (Home).
Select [Setup], and then press OK.
Press the Navigation buttons (up/down) to
select [Audio] > [Lip Sync], and then press
OK.
Select one of the following options, and
then press OK:
• [Auto]: For an HDMI connection,
automatically adjust the audio delay.
• [Manual]: Press the Navigation
buttons (up/down) to manually adjust
the audio delay.
• [Off]: Disable automatic adjustment
of audio.
Press OK to confirm.
1
2
3
4
5
USB storage devices
Enjoy pictures, audio and video on a USB storage
device.
What you need
• A USB storage device that is formatted for
FAT or NTFS file systems, and complies
with the Mass Storage Class.
• A USB extension cable, if the USB storage
device does not fit into the connector.
Note
•• You can use digital cameras connected by USB
if they can play the files without using a special
computer program.
•• To play DivX DRM - protected files from a
USB storage device, connect your SoundBar to
a TV through an HDMI cable.
EN
15
English
•
Play files
VOD code for DivX
1
2
Connect the USB storage device to the
SoundBar.
Press USB.
»» The content browser is displayed.
3
4
Select a file, and then press OK.
Press the playback buttons to control play
(see ‘Play buttons’ on page 16).
Play buttons
Button
Action
Navigation
buttons
OK
Navigate menus.
(Play)
/
/
Navigation
buttons (up/
down)
SUBTITLE
OPTIONS
Confirm an entry or
selection.
Start or resume play.
Pause play.
Stop play.
Skip to the previous or next
track, chapter or file.
Search backwards or
forward.
Rotate the picture counterclockwise or clockwise.
Select subtitle language for
video.
Access more play options
while playing a multimedia
file.
For video formats such as DivX and WMV:
• To stop play, press .
• To resume the video from where you
stopped, press (Play).
• To play the video from the start, press OK.
DivX
Play DivX videos from a USB storage device.
Note
•• To play DivX DRM protected files from a USB
storage device, connect your SoundBar to a
TV through an HDMI cable.
16
EN
Before you purchase DivX videos and play them,
register the SoundBar on www.divx.com using
the DivX VOD code.
Press (Home).
Select [Setup], and then press OK.
Select [MISC] > [DivX(R) VOD Code], and
then press OK.
»» The DivX VOD registration code for
your SoundBar is displayed.
1
2
3
Subtitles
If your video has subtitles in multiple languages,
select a subtitle language.
While playing video, press SUBTITLE to
select a language.
1
Note
•• Make sure that the subtitle file has the same
name as the video file. For example, if the
video file is named ‘movie.avi’, save the subtitle
file as ‘movie.srt’ or ‘movie.sub’.
•• You can play subtitle files in the following
formats: .srt, .sub, .txt, .ssa, .ass, smi, and .sami.
These files do not appear in the file navigation
menu.
Audio, video, and picture
options
Use advanced features when you play audio,
video, or media files from a USB storage device or
network media server (through SimplyShare).
Audio options
While playing audio, repeat an audio track or a
folder.
Press
OPTIONS repeatedly to cycle
through the following functions:
• [Repeat One]: Repeat the current
track or file.
• [Repeat All]: Repeat a selected folder.
• [Shuffle Loop]: Play audio tracks in
random order.
• [Repeat Off]: Turn off the repeat
mode.
1
Slideshows
While watching video, select options such as
subtitles, audio language, and video settings.
Depending on the video source, some options
are not available.
Press
OPTIONS.
»» The video options menu is displayed.
While playing audio, access fun features such as
picture and musical slideshows.
1
2
Press the Navigation buttons and OK to
select and change:
• [Audio]: Select audio language for
video.
• [Subtitle]: Select subtitle language for
video.
• [GoTo]: Skip to a specific part of the
video by entering the time of the
scene.
• [Repeat Title]: Repeat a title.
• [Repeat All]: Repeat all the tracks.
• [Repeat Off]: Turn off the repeat
mode.
• [Video Setting]: Adjust the video
output.
Picture options
While viewing a picture, add animation to a
slideshow or change the picture settings.
Press
OPTIONS.
»» The picture options menu appears.
1
2
Press the Navigation buttons and OK to
select and change the following settings:
• [Video Setting]: Adjust the video
output.
• [Background Music]: Select the music
track.
• [Slide Timing]: Select the display speed
for each picture in a slide show.
• [Slide Transition]: Select the transition
type for slideshow.
• [Shuffle Loop]:Play pictures in random
order.
• [Repeat All]: Repeat a selected folder.
• [Repeat Off]: Turn off the repeat
mode.
Picture slideshows
View a slideshow of your pictures stored in your
USB storage device or network media server.
Select a picture from the USB storage
device or network media server, and then
press (Play).
Press
OPTIONS.
Press Navigation buttons and OK to select
the following settings:
• [Slide Transition]: Select the transition
type for slideshow.
• [Slide Timing]: Select the display speed
for each picture in a slide show.
Press to stop the slideshow.
1
2
3
4
Musical slideshows
Create a musical slideshow to play music and
pictures at the same time.
Select a music track, and then press OK.
Press
BACK, and go to the picture
folder.
Select a picture, and then press (Play) to
start the slideshow.
Press to stop slideshow and music.
1
2
3
4
Use iPhone
Turn your iPhone into a virtual remote control, or
use it to browse the contents of a USB storage
device on your SoundBar.
What you need
• An iPhone (iOS 3.1.3 and above).
• A wired or wireless home network.
Before you start
• Connect your SoundBar to your home
network (see ‘Computers and the Internet’
on page 12).
• Name your SoundBar (see ‘Name your
SoundBar’ on page 14).
• Connect your iPhone to the same home
network. For details, see your iPhone user
manual.
EN
17
English
Video options
Download MyRemote application
Use your iPhone as a remote control
Download the Philips application, MyRemote
(MyRemote) to your iPhone. This application is
free.
The virtual remote control is displayed in
multiple screens on the iPhone. To access the
buttons, swipe the iPhone screen to the left or
right.
Only the control buttons that are relevant to
the play mode are enabled on your iPhone. For
example, if you play pictures, only the remote
control buttons that are used to control the
pictures are enabled. However, if you play a
video, additional buttons, such as SUBTITLE are
enabled on your iPhone.
Launch the application on your iPhone.
»» Depending on the play mode, the
relevant remote control buttons are
enabled.
Note
•• Philips MyRemote is only available for iPhones
and Android smartphones.
1
2
3
Tap the App Store (App Store) icon on the
iPhone.
Search for ‘Philips MyRemote’ application.
Follow the instructions on your iPhone to
download the application.
»» The MyRemote (MyRemote) icon is
added to the home screen of your
iPhone.
Access MyRemote application
Access the MyRemote application from your
iPhone, and then identify your SoundBar on the
home network.
Tap MyRemote (MyRemote) on your
iPhone.
»» Your SoundBar and the other devices
on the network are displayed on your
iPhone. A browsing bar with Devices,
Remote, and Source tabs is also
displayed.
1
2
3
If your SoundBar is not found, check the
network connection.
Then, tap the Devices (Devices) tab on
your iPhone to search again.
Tap the SoundBar icon on the iPhone.
»» The virtual remote control is displayed
on the iPhone.
4
To exit the application, press the home
button on your iPhone.
1
2
If the remote control buttons do not
appear, tap the Remote (Remote) tab on
your iPhone.
Swipe to the left or right screen to access
more buttons.
3
Note
•• Some control functions are not available on
iPhones.
Browse a USB storage device
Browse a USB storage device from your iPhone,
and play an audio, video, or multimedia file.
Launch the remote control application on
your iPhone.
Connect a USB storage device to your
SoundBar.
On your iPhone, tap the Source (Source)
tab, and then select USB (USB).
»» The folders in your USB storage device
are displayed.
1
2
3
4
5
18
EN
Select a folder to browse, and then select a
file to play.
»» The relevant remote control buttons are
enabled on your iPhone.
To access the remote control while you
browse the contents, tap the Remote
(Remote) tab on your iPhone.
•
When you connect your SoundBar to your home
network, you can enjoy music, photo, and video
stored on a computer or other media server on
the network through SimplyShare.
With SimplyShare, you can:
• select and play media stored on a computer
through your SoundBar,
• select media stored on a mobile device and
play it on your SoundBar, and
• use your mobile device as a controller to
select content from a media server, and play
it on your SoundBar.
The media server can be set up on any
DLNA-compatible device such as a computer,
smartphone, or tablet.
•
Note
•• You cannot share copyright protected content
through SimplyShare.
What you need
• A wired or wireless home network,
connected to a Universal Plug and
Play (uPnP) router. For best wireless
performance, coverage, and compatibility,
use 802.11n router.
• A LAN cable to connect your SoundBar to
your home network.
• A media server software such as:
• PC running Windows Media Player 11
or higher, or
• Mac running Twonky Media Server, or
• Mobile devices with media sharing
applications.
Note
•• There are numerous media servers in the
•
•
Browse PC from SoundBar
From the SoundBar home menu, access the
media files on your computer and share them
through SimplyShare.
To enable media sharing, set up the media server
software on your computer.
Set up media server software
Some examples of media servers are as follows.
To use other media servers, see the web site of
the media server.
Microsoft Windows Media Player 11
Start Windows Media Player on your PC.
Click the Library tab, and then select Media
Sharing.
The first time you select Media Sharing on
your PC,a pop-up screen appears. Check
the Share my media box and click OK.
»» The Media Sharing screen is displayed.
1
2
3
4
5
6
market for computers and mobile devices.
These media servers support variety of
devices, media types, and operating systems.
Select a media server based on the device,
operating system, and your needs.
Before you start
• Connect your SoundBar to your home
network. For best performance, connect
the SoundBar through a wired network (see
‘Computers and the Internet’ on page 12).
Connect your computer and other DLNAcompatible mobile devices to the same
home network. For details, see the user
manual of the device.
Make sure that the PC firewall allows you to
run the media server software.
Make sure that the devices supports DLNA
or media sharing (iOS) features.
Switch on the devices and the router.
In the Media Sharing screen, make sure
that you see a device marked as Unknown
Device.
»» If you don’t see an unknown device
after a minute or so, check that your PC
firewall is not blocking the connection.
Select the unknown device and click Allow.
»» A green tick appears next to the device.
By default, Windows Media Player shares
from these folders: My Music, My Pictures,
and My Videos. If your files are in other
folders, select Library > Add to Library.
»» The Add to Library screen is displayed.
»» If necessary, select Advanced options to
display a list of monitored folders.
7Select My folders and those of others I can
8
access, and then click Add.
Follow the onscreen instructions to add the
other folders that contain your media files.
EN
19
English
Share media through
SimplyShare
Microsoft Windows Media Player 12
Start Windows Media Player on your PC.
In Windows Media Player, click the Stream
tab, and then select Turn on media streaming.
»» The Media streaming options screen is
displayed.
1
2
3Click Turn on media streaming.
4
5
6
7
8
»» You return to Windows Media Player
screen.
the computer, make sure that the SoundBar
is connected to the home network, and the
media server software is properly set up.
1
Switch your TV to the correct HDMI source
for your SoundBar.
Press (Home).
»» The home menu is displayed.
Make sure that you see a media program in
the Local network screen.
»» If you don’t see a media program, check
that your PC firewall is not blocking the
connection.
4
5
Select the media program and click Allowed.
»» A green arrow appears next to the
media program.
Browse a media server from mobile
device
By default, Windows Media Player shares
from these folders: My Music, My Pictures,
and My Videos. If your files are in other
folders, click the Organize tab and select
Manage libraries > Music.
»» The Music Library Locations screen is
displayed.
Follow the onscreen instructions to add the
other folders that contain your media files.
2
3
4
Type a name for your media server, and
then click Save changes.
Back in the Twonky Media screen, select
Basic Setup and Sharing.
»» The Sharing screen is displayed.
20
•• Before you play multimedia content from
2
1
6
Note
Click the Stream tab and select More
streaming options.
»» The Media streaming options screen is
displayed.
Macintosh OS X Twonky Media (v4.4.2)
Visit www.twonkymedia.com to purchase
the software, or download a free 30-day
trial to your Macintosh.
Start Twonky Media on the Macintosh.
In the Twonky Media Server screen, select
Basic Setup and First Steps.
»» The First steps screen is displayed.
5
Play files from your PC
Browse and select folders to share, and
then select Save Changes.
»» Your Macintosh rescans the folders
automatically so that they are ready to
share.
EN
3Select [Network], and then press OK.
»» A content browser is displayed.
Select a file, and then press OK.
Press the playback buttons to control play
(see ‘Play buttons’ on page 16).
From your mobile device such as a smartphone
or tablet, access media files on any media
server on the network and share them through
SimplyShare.
Note
•• Not all devices are capable of sharing media
through SimplyShare. For information about
your mobile device, see the user manual of
your mobile device.
Download a media sharing application on your
mobile device.
• For Android based smartphones and
tablets, search for DLNA media server app
in Android Market (Android).
• For iPhones, iPods and iPads, search for
media server app in App Store (Apple).
Follow the onscreen instructions to set up the
media server software on your mobile device.
Make sure that you select the correct settings
to use the mobile device as a media server and
controller. For details, check the user manual of
the mobile application.
Note
•• The exact steps differ from one device to
another. For information about your mobile
device, contact the support center of your
device.
1
2
Make sure that the media server application
is set up on your mobile device.
Launch the media sharing application on the
mobile device.
»» Your SoundBar, mobile device, and
other devices on the home network are
automatically detected and displayed on
the screen.
3
4
5
6
Select the device that stores your media
files. For example, if you want to play a file
from your mobile device, select the mobile
device. If you want to play a file from your
computer, select your computer.
»» The folders in the selected device are
displayed. Depending on the media
server, the folder names may vary.
»» If you cannot see the folders, make sure
that you enable media sharing on the
selected device so that the content is
available for sharing.
Select a media file to play.
From the menu of your mobile device,
select SoundBar to stream the media to
your SoundBar.
Tap the play buttons on your mobile device
to control the play.
»» The media file is shared on the home
network.
»» Some media files may not display or play
due to compatibility issues.
EasyLink
The SoundBar supports Philips EasyLink, which
uses the HDMI-CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices that
are connected through HDMI can be controlled
by a single remote control.
Philips does not guarantee 100% interoperability
with all HDMI-CEC devices.
What you need
• HDMI-CEC compliant devices.
• An HDMI connection between the
connected devices.
English
Control and play files stored on any
device
Switch on
1
On the TV and other connected devices,
turn on the HDMI-CEC operations. For
details, see the manual of the TV or other
devices.
Press (Home).
Select [Setup], and then press OK.
Select [EasyLink] > [EasyLink], and then
press OK.
Select [On], and then press OK.
2
3
4
5
Control devices
Control the SoundBar and the other connected
HDMI-CEC compliant devices with a single
remote control.
One-touch play
If you enable One-touch play, the TV
automatically switches to the correct channel
when you play a video in your SoundBar.
One-touch standby
When you press and hold (Standby) on
the remote control, the SoundBar and all the
connected HDMI-CEC devices (that support
one-touch standby) switch to the standby mode.
If one-touch standby is enabled on your
SoundBar, you can switch to standby with the
remote control of the TV or other HDMI-CEC
devices.
Auto Power On From TV
If auto power from TV is enabled on your
SoundBar, you can turn on your SoundBar
when you press and hold the (Standby) on
the TV remote control.
System Audio Control
When you play a device that has its audio
output routed to the SoundBar, turn on System
Audio control and select audio source through
your connected device.
To use one-touch audio, turn on System Audio
Control and select audio source through your
connected device.
HDMI ARC
When you switch source to HDMI ARC, turn
on HDMI ARC.
EN
21
Play audio from SoundBar
Play the audio from a connected device through
your SoundBar.
Press (Home).
Select [Setup], and then press OK.
Select [EasyLink] > [System Audio
Control] > [On], and then press OK.
Press AUDIO SOURCE button on your
remote control to select the audio output
for the connected device.
• AUX: Switch your audio source to the
AUX connection.
• COAXIAL: Switch your audio source
to the coaxial connection.
• OPTICAL: Switch your audio source
to the optical connection.
Press OK to confirm.
1
2
3
4
5
Note
•• To play TV audio from your SoundBar through
HDMI ARC connection, select the correct
video input on the TV and turn off the TV
speakers (see ‘Connect to TV’ on page 10).
•• For details, see the TV user manual.
7 Change settings
This section helps you to change the settings of
your SoundBar.
Caution
•• Most of the settings are already configured
with the best value for your SoundBar. Unless
you have a reason to change a setting, it is best
to leave it at the default value.
Picture
Change the picture settings to suit your
preferences.
Note
•• The best setting is automatically selected for
the TV. If you change the setting, make sure
that the TV supports the new settings.
Picture settings and format
1Press (Home).
2Select [Setup], and then press OK.
3Select [Video] > [Aspect Ratio], and then
4
22
EN
press OK.
Select one of the following settings, and
then press OK:
• [16:9]: Display picture in 16:9 aspect
ratio if the source is 16:9.
• [Pan Scan 4:3]:Adjust the 16:9 source
to display picture in 4:3 aspect ratio.
• [Letter Box 4:3]: Adjust the 16:9
source to display picture in 4:3 aspect
ratio with black borders on top and
bottom.
• [16:10]: Display picture in 16:10 aspect
ratio if the source is 16:10.
Video setting
Deep Color recreates the natural world on your
TV screen and displays vivid images in over a
billion of colors.
If your TV supports Deep Color and is
connected to your SoundBar through an HDMI
cable, you can change the Deep Color.
Press (Home).
Select [Setup], and then press OK.
Select [Video] > [Deep Color], and then
press OK.
Select one of the following options, and
then press OK:
• [Auto]: Automatically select HDMI
Deep Color.
• [10 bit]: Display 10-bit color.
• [12 bit]: Display 12 bit color.
• [Off]: Display standard 24-bit color.
Adjust the video output.
Press (Home).
Select [Setup], and then press OK.
Select [Video] > [Video Setting], and then
press OK.
Adjust the settings.
Press OK to confirm.
Picture resolution
1
2
3
1
2
3
4
Set the picture resolution for your video.
Press (Home).
Select [Setup], and then press OK.
Select [Video] > [TV System], and then
press OK.
Select a picture resolution, and then press
OK.
1
2
3
4
1
2
3
4
5
Sound
Change the sound settings to suit your preference.
HDMI audio
To hear an HDMI audio output from your TV,
connect your SoundBar to the TV through an
HDMI cable.
Press (Home).
Select [Setup], and then press OK.
Select [Audio] > [HDMI Output], and then
press OK.
Select the following options, and then press
OK:
• [PCM]: Switch audio output to stereo.
• [RAW]: Output original DTS or Dolby
audio.
4
Video zoom
Night mode
Zoom into a picture or video.
Press (Home).
Select [Setup], and then press OK.
Select [Video] > [Video Zoom] > [On],
and then press OK.
For quiet listening, decrease the volume of loud
sounds when you play audio. Night mode is only
available for Dolby-encoded audio.
Press (Home).
Select [Setup], and then press OK.
Select [Audio] > [Night mode] > [On], and
then press OK.
1
2
3
1080P 24 Hz output
1
2
3
Enable 1080p 24 Hz HDMI output on your TV.
Press (Home).
Select [Setup], and then press OK.
Select [Video] > [1080P 24Hz] > [On], and
then press OK.
1
2
3
EN
23
English
Picture color
Language
DLNA DMR control
Select a language for the home menu and subtitles.
Restrict access to DLNA DMR content.
Press (Home).
Select [Setup], and then press OK.
Select [System] > [DLNA DMR] > [On],
and then press OK.
Home menu
1Press (Home).
2Select [Setup], and then press OK.
3Select [System] > [Menu Language], and
4
then press OK.
Select a menu language, and then press OK.
Video subtitle
1Press (Home).
2Select [Setup], and then press OK.
3Select [System] > [Subtitle], and then press
1
2
3
Energy saving
Save energy by changing the following settings.
Auto standby
Scan your USB storage device
When playing a file from a USB storage device or
network media server, automatically switch your
Soundbar to standby if:
• it is in pause or stop mode, and
• no button is pressed for 15 minutes.
Press (Home).
Select [Setup], and then press OK.
Select [System] > [Auto Standby] > [On],
and then press OK.
Scan the USB storage device connected to your
SoundBar to browse the media files.
Sleep timer
4
OK.
Select a subtitle language for your video,
and then press OK.
Automatic scan
Automatically scan the USB storage device
connected to your SoundBar.
Press (Home).
Select [Setup], and then press OK.
Select [System] > [Auto Scan] > [Auto
scan on], and then press OK.
1
2
3
Rescan
Rescan the USB storage device connected to
your SoundBar or stop scanning.
Press (Home).
Select [Setup], and then press OK.
Select [System] > [Scan Storage] >
[Rescan Storage]/ [Stop Scanning Storage] ,
and then press OK.
1
2
3
24
EN
1
2
3
Set timers to switch the SoundBar to standby
after a specified time.
Press (Home).
Select [Setup], and then press OK.
Select [System] > [Sleep Timer], and then
press OK.
Select the duration of the sleep timer.
»» The sleep timer can be set up to 60
minutes. If the sleep timer is set to [Off],
it switches off.
1
2
3
4
5Press OK to activate.
»» The SoundBar switches to standby after
the specified time.
Automatically switch your SoundBar to screen
saver mode if:
• it is in pause or stop mode, and
• no button is pressed for the specified time.
Press (Home).
Select [Setup], and then press OK.
Select [System] > [Screen Saver], and then
press OK.
Specify the time period by selecting one of
the following options, and then press OK.
• [Off]: Disable the screen saver.
• [2 Minutes]: Switch to screen saver
mode after two minutes.
• [5 Minutes]: Switch to screen saver
mode after five minutes.
• [10 Minutes]: Switch to screen saver
mode after ten minutes.
1
2
3
4
Resume play
Resume play from where you stopped.
Press (Home).
Select [Setup], and then press OK.
Select [System] > [Resume Play] > [On],
and then press OK.
1
2
3
Apply factory settings
Reset your SoundBar to the default settings.
Press (Home).
Select [Setup], and then press OK.
Select [System] > [Factory Default], and
then press OK.
Select [Yes], and then press OK.
1
2
3
4
8 Update software
To continue to get the best features and support
for your SoundBar, update the software regularly.
Compare the version of your current software with
the latest version on www.philips.com/support.
Check software version
1Press (Home).
2Select [Setup], and then press OK.
3Select [MISC] > [Version Info], and then
press OK.
»» The software version is displayed.
Update software through the
Internet
1
Connect your SoundBar to the network.
Use a
• wired network connection (see ‘Wired
connection’ on page 13), or
• a wireless network connection (see
‘Wireless connection’ on page 13).
Press (Home).
Select [Setup], and then press OK.
Select [MISC] > [Online Upgrade].
»» If an upgrade media is detected, you are
prompted to start or cancel the update.
2
3
4
5
Follow the instruction on the TV to confirm
the update.
»» When the software update is complete,
the SoundBar automatically switches off
and restarts. If it does not, disconnect the
power cord for a few seconds and then
reconnect it.
Note
•• If the SoundBar cannot connect to the
Philips server, press (Home), and then
select [Setup] > [Network] > [Ethernet]/
[Wireless] to set up the network.
EN
25
English
Screen saver
Update software through USB
What you need
• A USB flash drive, with at least 75MB of
memory. The USB flash drive must be FAT or
NTFS formatted. Do not use a USB hard drive.
• A computer with Internet access.
• An archive utility that supports the ZIP
file format (for example, WinZip® for
Microsoft® Windows® or Stufflt® for
Macintosh®).
Step 1: Download the latest software
1
2
9 Product specifications
Note
•• Specifications and design are subject to change
without notice.
Media formats
•
Picture files, MP3 media, WMA media,
DivX Plus HD media, USB storage device
Connect a USB flash drive to your computer.
In your web browser, go to www.philips.
com/support.
At the Philips Support website, find your
product and locate the Software and drivers.
»» The software update is available as a zip
file.
File formats
4
•
5
Save the zip file in the root directory of
your USB flash drive.
Use the archive utility to extract the
software update file in the root directory of
the USB flash drive.
»» The files are extracted under the root
directory of your USB flash drive.
Audio formats
3
6
Disconnect the USB flash drive from your
computer.
Step 2: Update the software
1
2
3
4
5
Connect the USB flash drive to your SoundBar.
Switch your TV to the correct source for
your SoundBar.
Press (Home), and then select [Setup].
Select [MISC] > [USB Upgrade].
Follow the instructions on the TV to
confirm the update.
»» When the software update is complete,
the SoundBar automatically switches off
and restarts. If it does not, disconnect the
power cord for a few seconds, and then
reconnect it.
Note
•• When the software update is in progress, do
not turn off the power or remove the USB
flash drive.
26
EN
•
•
Audio: .aac, .mka, .mp3, .wma, .wav, .mp4, .m4a
Video:
• .avi, .divx, .mp4, .mkv, .asf, .wmv, .mpg,
.mpeg, .mov, .m4v
• .rmvb, .rm (Available only in Asia
Pacific and China)
Picture: .bmp, .jpg, .jpeg, .gif, .png
Your SoundBar supports the following audio files.
Extension
Container Audio
codec
.mp3
MP3
.wma
ASF
.aac
AAC
.wav
.m4a
.mka
WAV
MKV
MKA
.mka
MKA
.mka
.mka
.mka
MKA
MKA
MKA
.mka
MKA
.mka
MKA
MP3
Bit rate
32 kbps ~
320 kbps
WMA
64 kbps ~
160 kbps
AAC, HE- 192 kbps
AAC
PCM
1.4 Mbps
AAC
192 kbps
PCM
27.648
Mbps
Dolby
640 kbps
Digital
DTS core 1.54 Mbps
MPEG
912 kbps
MP3
32 kbps ~
320 kbps
WMA
64 kbps ~
160 kbps
AAC, HE- 192 kbps
AAC
Video formats
If you have a high definition TV, your SoundBar
allows you to play your video files with:
• Resolution: 1920 x 1080 pixels at
• Frame rate: 6 ~ 30 frames per second.
.avi files in AVI container
Audio
codec
Video codec
Bit rate
PCM,
Dolby
Digital,
DTS
core,
MP3,
WMA
DivX 3.11, DivX 4.x,
DivX 5.x, DivX 6.x
10 Mbps max
Audio
codec
Video codec
Dolby
MPEG 1, MPEG 2
Digital,
MPEG,
MP3,
AAC, HEAAC
MPEG 4 ASP
H.264/AVC
[email protected]/4.0;
[email protected]/3.1/3.0
Bit rate
20 Mbps (peak
40 Mbps)
10 Mbps max
20 Mbps (peak
40 Mbps)
.mkv files in MKV container
MPEG 1, MPEG 2
MPEG 4 ASP
H.264/AVC
[email protected]/4.0;
[email protected]/3.1/3.0
WMV9
20 Mbps
(peak 40
Mbps)
10 Mbps max
20 Mbps
(peak 40
Mbps)
20 Mbps
.divx files in AVI container
Audio
codec
Video codec
Bit rate
PCM,
Dolby
Digital,
MP3,
WMA
DivX 3.11, DivX 4.x,
DivX 5.x, DivX 6.x
10 Mbps
max
MPEG 1, MPEG 2
MPEG 4 ASP
20 Mbps
(peak 40
Mbps)
10 Mbps
max
Audio codec Video codec
Bit rate
PCM, Dolby MPEG 1, MPEG 2
Digital, DTS
core, MPEG,
MP3, WMA,
AAC, HEAAC
MPEG 4 ASP
H.264/AVC
[email protected]/4.0;
[email protected]/3.1/3.0
WMV9
20 Mbps (peak
40 Mbps)
10 Mbps max
20 Mbps (peak
40 Mbps)
20 Mbps
.asf and .wmv files in ASF container
Audio codec Video codec
Bit rate
PCM,
MPEG 4 ASP
Dolby
Digital,
MP3, WMA
H.264/AVC
[email protected]/4.0;
[email protected]/3.1/3.0
WMV9
10 Mbps max
20 Mbps (peak
40 Mbps)
20 Mbps
EN
27
English
.mp4 or .m4v files in MP4 container
.mpg and .mpeg files in PS container
Audio codec Video codec
Bit rate
PCM, DTS MPEG 1, MPEG
core, MPEG, 2
MP3
MPEG 1, MPEG
2
20 Mbps (peak
40 Mbps)
20 Mbps (peak
40 Mbps)
.rm and .rmvb files in RM container (Available
only in Asia Pacific and China)
Audio codec Video codec
AAC,
COOK
Bit rate
RV30, RV40 20 Mbps (peak 40
Mbps)
Amplifier
•
•
•
•
Total output power: 150W RMS (30%
THD)
Frequency response: 20 Hz-20 kHz / ±3 dB
Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
Input sensitivity:
• AUX: 500 mV
Video
•
HDMI output: 480i/576i, 480p/576p, 720p,
1080i, 1080p, 1080p24
Audio
•
•
•
S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
Sampling frequency:
• MP3: 32 kHz, 44.1 kHz, 48 kHz
• WMA: 44.1 kHz, 48 kHz
Constant bit rate:
• MP3: 32 kbps - 320 kbps
• WMA: 48 kbps - 192 kbps
USB
•
•
•
•
Compatibility: Hi-Speed USB (2.0)
Class support: USB Mass Storage Class
(MSC)
File system: FAT16, FAT32, NTFS
Maximum memory support: < 2 TB
28
EN
Main unit
•
•
•
•
•
•
•
•
Power supply: 110-240V, 50-60Hz
Power consumption: 25 W
Standby power consumption: ≤ 0.5 W
Speaker impedance: 8 Ohm
Speaker drivers: 2 x 64mm (2.5’’) woofer +
2 x 25.4 mm (1”) tweeter
Frequency response: 150 Hz - 20 kHz
Dimensions (WxHxD): 840 x 48 x 110 mm
Weight: 2.2 kg
Subwoofer
•
•
•
•
•
•
•
•
•
Output power: 90W RMS (30% THD)
Power supply: 110-240 V, 50-60 Hz
Power consumption: 30 W
Standby power consumption: 0.5 W
Impedance: 4 ohm
Speaker drivers: 130 mm (5.25”) woofer
Frequency response: 20 Hz-150 Hz
Dimensions (WxHxD): 226 x 253 x 280
mm
Weight: 3.3 kg
Remote control batteries
•
2 x AAA-R03-1.5 V
Warning
•• Risk of electric shock. Never remove the
casing of the product.
To keep the warranty valid, never try to repair the
product yourself.
If you have problems using this product, check the
following points before you request service. If you
still have a problem, register your product and get
support at www.philips.com/welcome.
Picture
No picture.
• Make sure that the TV is switched to the
correct source for the SoundBar.
No picture on a TV connected through HDMI.
• Make sure that you use a High Speed HDMI
cable to connect the SoundBar and TV.
Some Standard HDMI cables do not display
properly for some images or Deep Color.
• Make sure that the HDMI cable is not faulty.
If it is faulty, replace it with a new cable.
Sound
No sound from SoundBar speakers.
• Make sure that the SoundBar is not muted.
• Connect the audio cable from your
SoundBar to your TV or other devices. You
do not need a separate audio connection
when the SoundBar and TV are connected
through HDMI ARC connection.
• Set up the audio for the connected device.
• Reset your SoundBar to its factory settings.
Switch it off, and then switch on again.
• On your SoundBar, press the correct source
button to select the correct audio input.
No sound from wireless subwoofer.
Switch off the SoundBar and then switch it
on again.
Switch the SoundBar to AUX source.
Press and hold CONNECT on the
subwoofer until the indicator on the back of
the subwoofer blinks.
1
2
3
4
Press and hold Navigation button (right)
for at least three seconds.
»» When the wireless connection succeeds,
the indicator on the subwoofer lights up.
»» If the wireless pairing fails, repeat steps 1
to 4 to connect your subwoofer to the
SoundBar.
Distorted sound or echo.
• If you play audio from the TV through the
SoundBar, make sure that the TV is muted.
Audio and video are not synchronized.
• 1) Press (Home). 2) Select [Setup],
and then press OK. 3) Select [Audio] >
[Lip Sync], and then press OK. Press the
Navigation buttons ( / ) to select
[Auto] or [Manual] and synchronize audio
and video (see ‘Synchronize picture and
sound’ on page 15).
Play
Cannot play a DivX file.
• Make sure that the DivX file is encoded
according to the ‘SoundBar’ with the DivX
encoder.
• Make sure that the DivX file is complete.
DivX or RMVB/RM subtitles do not display
correctly.
• Make sure that the subtitle file name is the
same as the movie file name (see ‘Subtitles’
on page 16).
Cannot read the contents of a USB storage
device.
• Make sure that the format of the USB
storage device is compatible with the
SoundBar.
• Make sure that the file system on the
USB storage device is supported by the
SoundBar.
EasyLink does not work.
• Make sure that the SoundBar is connected
to a Philips brand EasyLink TV, and the
EasyLink option is turned on (see ‘Switch
on’ on page 21).
When you switch on the TV, the SoundBar
automatically switches on.
• This behavior is normal when you are using
Philips EasyLink (HDMI-CEC). To make the
SoundBar work independently, switch off
EasyLink.
EN
29
English
10Troubleshooting
Network
Wireless network distorted or not found.
• Make sure that the wireless network is
not disturbed by microwave ovens, DECT
phones, or other neighboring Wi-Fi devices.
• Place the wireless router and the SoundBar
within five meters of each other.
• If the wireless network does not work
properly, try a wired network installation
(see ‘Wired connection’ on page 13).
11Index
A
advanced
restore default settings
25
software update
25
software version
25
amplifier28
audio
HDMI audio
23
night mode
23
predefined modes
14
settings23
source12
specifications
28
audio formats26
audio options16
auto standby24
B
bass15
browse
USB storage device
15
C
care
environment7
product7
compliance4
computer
connect to
12
DLNA19
media server software
19
computer network12
connect
audio (analog cable)
12
audio (coaxial cable - digital)
12
audio (optical cable - digital)
11
audio from TV and other devices
11
home network
12
TV (HDMI ARC)
10
TV (HDMI)
11
connectors
back connectors
10
side connectors
10
control
Easylink (HDMI-CEC)
9
main unit 7
USB storage device
16
copyright protection4
30
EN
disable
HDMI-CEC21
DivX
subtitles16
DLNA19
E
EasyLink (HDMI-CEC)
control buttons
9
enable
auto standby
24
HDMI-CEC21
screen saver
25
energy
auto standby
24
screen saver
25
sleep timer
24
multimedia content
from USB storage device
15
English
D
N
network
home network
12
name a device
14
settings14
troubleshooting30
update software
25
wired connection
13
wireless connection
13
night mode23
O
factory settings25
FAQs4
options
audio16
overview
HDMI-CEC21
main unit
7
remote control
8
settings22
H
P
F
HDMI
audio23
TV (HDMI ARC)
10
HDMI-CEC21
I
Internet
connect to
update software
12
25
L
language
onscreen menu
24
legal notices4
M
main unit
overview7
specifications
28
media formats26
media server software19
Microsoft Windows Media Player 11 19
Microsoft Windows Media Player 1220
PC
connect to
12
DLNA19
media server software
19
Philips Easylink21
picture
slideshows17
troubleshooting29
play
slideshows17
troubleshooting29
USB15
power options
auto standby
24
screen saver
25
sleep timer
24
preference
audio23
auto standby
24
menu language
24
screen saver
25
sleep timer
24
product specifications26
EN
31
R
recycling7
remote control
batteries28
overview8
S
safety
disposal7
use of the product
6
screen saver25
settings
audio23
auto standby
24
HDMI audio
23
HDMI-CEC21
menu language
24
power24
screen saver
25
sleep timer
24
video22
side connectors10
sleep timer24
slideshows
animation17
duration17
musical17
picture17
software
check current version
25
update25
sound
auto volume
15
bass15
equalizer15
predefined sound mode
14
surround sound
15
synchronize picture and sound
15
treble15
troubleshooting29
specifications26
subwoofer
specifications
28
synchronize picture and sound15
32
EN
T
trademarks5
treble15
troubleshooting
connection29
network30
picture29
play29
serial number
4
sound29
U
update software
check current version
25
from a USB storage device
26
from network
25
USB
format28
USB storage device
control buttons
16
play16
specifications
28
update software
26
V
video
synchronize picture and sound
15
video formats28
W
wired network
wired connection
wireless network
wireless connection
13
13
Language Code
Abkhazian
6566
Afar
6565
Afrikaans
6570
Amharic
6577
Arabic
6582
Armenian
7289
Assamese
6583
Avestan
6569
Aymara
6589
Azerhaijani
6590
Bahasa Melayu
7783
Bashkir
6665
Belarusian
6669
Bengali
6678
Bihari
6672
Bislama
6673
Bokmål, Norwegian
7866
Bosanski
6683
Brezhoneg
6682
Bulgarian
6671
Burmese
7789
Castellano, Español
6983
Catalán
6765
Chamorro
6772
Chechen
6769
Chewa; Chichewa; Nyanja 7889
9072
中文
Chuang; Zhuang
9065
Church Slavic; Slavonic 6785
Chuvash
6786
Corsican
6779
esky
6783
Dansk
6865
Deutsch
6869
Dzongkha
6890
English
6978
Esperanto
6979
Estonian
6984
Euskara
6985
6976
Faroese
7079
Français
7082
Frysk
7089
Fijian
7074
Gaelic; Scottish Gaelic 7168
Gallegan
7176
Georgian
7565
Gikuyu; Kikuyu
7573
Guarani
7178
Gujarati
7185
Hausa
7265
Herero
7290
Hindi
7273
Hiri Motu
7279
Hrwatski
6779
Ido
7379
Interlingua (International)7365
Interlingue
7365
Inuktitut
7385
Inupiaq
Irish
Íslenska
Italiano
Ivrit
Japanese
Javanese
Kalaallisut
Kannada
Kashmiri
Kazakh
Kernewek
Khmer
Kinyarwanda
Kirghiz
Komi
Korean
Kuanyama; Kwanyama
Kurdish
Lao
Latina
Latvian
Letzeburgesch;
Limburgan; Limburger
Lingala
Lithuanian
Luxembourgish;
Macedonian
Malagasy
Magyar
Malayalam
Maltese
Manx
Maori
Marathi
Marshallese
Moldavian
Mongolian
Nauru
Navaho; Navajo
Ndebele, North
Ndebele, South
Ndonga
Nederlands
Nepali
Norsk
Northern Sami
North Ndebele
Norwegian Nynorsk;
Occitan; Provencal
Old Bulgarian; Old Slavonic
Oriya
Oromo
Ossetian; Ossetic
Pali
Panjabi
Persian
Polski
Português
7375
7165
7383
7384
7269
7465
7486
7576
7578
7583
7575
7587
7577
8287
7589
7586
7579
7574
7585
7679
7665
7686
7666
7673
7678
7684
7666
7775
7771
7285
7776
7784
7186
7773
7782
7772
7779
7778
7865
7886
7868
7882
7871
7876
7869
7879
8369
7868
7878
7967
6785
7982
7977
7983
8073
8065
7065
8076
8084
Pushto
Russian
Quechua
Raeto-Romance
Romanian
Rundi
Samoan
Sango
Sanskrit
Sardinian
Serbian
Shona
Shqip
Sindhi
Sinhalese
Slovensky
Slovenian
Somali
Sotho; Southern
South Ndebele
Sundanese
Suomi
Swahili
Swati
Svenska
Tagalog
Tahitian
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga (Tonga Islands)
Tsonga
Tswana
Türkçe
Turkmen
Twi
Uighur
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Walloon
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
8083
8285
8185
8277
8279
8278
8377
8371
8365
8367
8382
8378
8381
8368
8373
8373
8376
8379
8384
7882
8385
7073
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
8479
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9085
© 2011 Koninklijke Philips Electronics N.V.
All rights reserved.
Sgpam_1134/CSS5123_12-WesternEu-v1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement