AP545
Indoor Full HD
Antenna
USER GUIDE
INSTALLATION INSTRUCTIONS
Congratulations on the purchase of this
amplified digital indoor antenna. It has been
specifically designed for use with digital
television and set top box receivers.
• Remove the antenna from the box.
• Switch off the TV.
• Place the antenna in a position that is close
to the digital TV receiver.
• Connect the antenna to the antenna socket
on your digital TV receiver using the coaxial
lead supplied.
SPECIFICATIONS
Frequency range
Antenna gain
VHF: 167-230MHz
• Plug the AC adaptor into the (DC IN) socket
on the antenna.
UHF: 470-862MHz
• Switch on antenna and TV
VHF: 20dB
• Adjust the position of the indoor digital
antenna for optimum signal reception.
UHF: 20dB
Impeance
75Ω
Polarization method
Horizontal
Power supply
12V DC, 100mA
Cable length
1.5 metre
• Using gain adjustment knob, begin at zero,
and increase gain slowly until you see a
good picture on your TV.
Note: There is no need to over amplify your
received signal, this will cause the same issues
as if you do not have enough signal
(ie. pixelation).
SET UP CONFIGURATION
Supplied
Transformer
View from rear
of Antenna
To antenna input
of TV or set top box
Gain Controller
Potentiometer
CPIN 1079/2
Download PDF