Setting Up Your MX512 In Default Mode (Tel Priority Mode) With An

Setting Up Your MX512 In
Default Mode (Tel Priority Mode)
With An Answering Machine
Next
Fax Easy Setup
Click Next to step through this image-friendly version of Fax Easy Setup.
If you started Fax Easy Setup, on the fax machine’s operation panel, and
prefer to go through this image-friendly version…
Step 1
Step 2
Press the COPY button at any
screen to go to copy standby mode.
Click Next to proceed
through the setup.
Previous
Next
Connecting The Phone Lines
Previous
Next
Connecting Your Phone/Answering Machine
Is your answering machine built into your phone?
YES
Click Here or Go To Page 13
NO
Click the Next Button
Previous
Next
4
Fax to Phone Line Connection
Before
Answering
Machine
Wall Jack
(Existing Phone Cord)
Hand Set
(Phone)
(Existing Phone Cord)
After
Wall Jack
Answering
Machine
(Existing Phone Cord)
Hand Set
(Phone)
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Previous
Next
5
Fax to Phone Line Connection
• Plug the provided phone cord into the wall jack
Wall Jack
Answering
Machine
(Existing Phone Cord)
Hand Set
(Phone)
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Previous
Next
6
Fax to Phone Line Connection
• Plug the provided phone cord into the “LINE” jack located on the
rear of the multifunction.
Wall Jack
Answering
Machine
(Existing Phone Cord)
Hand Set
(Phone)
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Previous
Next
7
Fax to Phone Line Connection
• Remove the white plug from the upper jack labeled “EXT.”
Wall Jack
Answering
Machine
(Existing Phone Cord)
Hand Set
(Phone)
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Previous
Next
8
Fax to Phone Line Connection
• Plug the second phone cord into the “EXT.” jack located on the rear
of the multifunction
Wall Jack
Answering
Machine
(Existing Phone Cord)
Hand Set
(Phone)
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Previous
Next
9
Fax to Phone Line Connection
• Plug the second phone cord into the answering machine.
Wall Jack
Answering
Machine
(Existing Phone Cord)
Hand Set
(Phone)
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Previous
Next
10
Fax to Phone Line Connection
• Plug the third phone cord into the answering machine.
Wall Jack
Answering
Machine
(Existing Phone Cord)
Hand Set
(Phone)
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Previous
Next
11
Fax to Phone Line Connection
• Plug the third phone cord into the phone.
Wall Jack
Answering
Machine
(Existing Phone Cord)
Hand Set
(Phone)
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Previous
Next
12
Fax to Phone Line Connection
Before
Hand Set
(Phone)
Wall Jack
(Existing Phone Cord)
After
Hand Set
(Phone)
Wall Jack
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Previous
Next
13
Fax to Phone Line Connection
• Plug the provided phone cord into the wall jack
Hand Set
(Phone)
Wall Jack
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Previous
Next
14
Fax to Phone Line Connection
• Plug the provided phone cord into the “LINE” jack located on the
rear of the multifunction
Hand Set
(Phone)
Wall Jack
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Previous
Next
15
Fax to Phone Line Connection
• Remove the white plug from the upper jack labeled “EXT.”
Hand Set
(Phone)
Wall Jack
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Previous
Next
16
Fax to Phone Line Connection
• Plug the second phone cord into the “EXT.” jack located on the rear
of the multifunction
Hand Set
(Phone)
Wall Jack
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Previous
Next
17
Fax to Phone Line Connection
• Plug the second phone cord into the phone
Hand Set
(Phone)
Wall Jack
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Previous
Next
18
Setting Up The Receive Mode
Previous
Next
Step 1
Step 2
Turn on the MX512 by pressing the
ON button if it is not powered on
already.
Press the FAX button.
Previous
Next
20
Step 3
Step 4
The fax standby screen will appear.
Press the center FUNCTION button.
Previous
Next
21
Step 5
Step 6
The Receive mode settings
screen will appear.
Use the UP or Down button to
highlight “TEL priority mode”.
Previous
Next
22
Step 7
Step 8
Press the right FUNCTION button
under the Advanced label.
The Advanced screen will appear.
Previous
Next
23
Step 9
Step 10
Use the UP or DOWN button to
select “User-friendly reception”.
Press the OK button.
Previous
Next
24
Step 11
Step 12
The User-friendly reception
screen will appear.
Use the UP or DOWN button to
select “ON”.
Previous
Next
25
Step 13
Step 14
Press the OK button.
The screen will quickly flash “Userfriendly reception ON”.
Previous
Next
26
Step 15
Step 16
The screen will return to the
Advanced window.
Press the Back button to return to
Receive mode settings window.
Previous
Next
27
Step 17
Step 18
Confirm “TEL priority mode” is
highlighted and then press the OK
button.
You will return to the “Fax standby
screen” and the receive mode will
appear on the screen.
Previous
Next
28
Receiving A Fax
To receive a fax:
• Pick up the handset on the phone connected to the MX512.
• Listen for fax tones.
• When the tones stop hang up the handset.
• The MX512 will receive the fax document.
To receive a fax while you are away:
• The answering machine will answer the call.
• If fax tones are heard by the MX512 it will take over the call and receive the
fax document.
IMPORTANT: In order to receive a fax, you must either pick up the handset on a phone that is connected to the MX512
or let your answering machine answer the call.
Previous
29