QSC Q-SYS Core 2200, Core 5200, Core 110f, Core 510i, Core 1100, Core 3100, CXD-Q CXD4.5Q, CXD8.4Qn, CXD4.2Q, CXD4.3Q, CXD8.4Q, CXD8.8Q, CXD8.8Qn, PTZ -12x72, PTZ -20x60, I/O -USB Bridge, I/O -8 Flex, I/O Frame, I/O -22, TSC -7t, TSC -7w Pocket Reference Guide
Below you will find brief information for Q-SYS Core 2200, Q-SYS Core 5200, Q-SYS Core 110f, Q-SYS Core 510i, Q-SYS Core 1100, Q-SYS Core 3100, CXD-Q CXD4.5Q, CXD-Q CXD8.4Qn, CXD-Q CXD4.2Q, CXD-Q CXD4.3Q. These devices are designed to give you a brief overview of the latest QSC systems products and technologies. The Q-SYS™ platform provides a unified software design tool and feature set suitable for projects of any scale, with the bandwidth to handle even the most complex configurations. Q-SYS™ is ready for any job, from boardrooms and hotels to airports and stadiums. The CXD-Q Series amplifiers include seven models, three four channel and four eight channel, and are capable of delivering robust, high-fidelity power to drive a wide range of loudspeaker configurations including 70V and 100V systems.
Advertisement
Advertisement
Pocket Reference Guide
QSC is a globally recognized manufacturer of audio, video and control systems for huddle rooms to large outdoor venues—and everything in between. While we’re known for solid amplifiers and loudspeakers, we have a rich legacy in networked audio and digital signal processing. This history, combined with strong IT expertise, allows our team to develop flexible, software-based system solutions. Our systems enable your team to design and integrate projects that deliver the native IT integration and standards-based technology today’s IT decision makers expect.
The following pages represent our latest systems products and technologies. Designed to give you a brief overview, this guide should be considered a supplement to the products and solutions pages online at qsc.com. You will find a fully updated, comprehensive set of information, documentation, tools and images that work in tandem with this guide.
Additionally, our online training site is another great resource to learn more about QSC products and solutions.
Enjoy the guide.
2 Table of Contents
Q-SYS
™
System Platform
Q-SYS Processors
Networked Amplifiers
Q-SYS AV-to-USB Bridging Solution
Q-SYS I/O Peripherals
Q-SYS Control Peripherals
Q-SYS I/O Cards
Q-SYS Public Address Peripherals
Amplifiers
SPA Series
CXD Series
CX Series
PowerLight ™ 3 Series
CMXa Series
ISA Series
28
30
32
34
36
38
17
19
22
24
6
10
14
Table of Contents 3
Loudspeakers
Ceiling-mount
AcousticCoverage
™
AcousticDesign
™
Pendant-mount
AcousticDesign
™
Surface-mount
AcousticCoverage ™
AcousticDesign ™
AcousticPerformance
™
Series
ILA Series (Installation Line Array)
K.2 Series Powered Loudspeakers
KS Series Cardiod Subwoofer
54
58
60
72
76
80
82
KW Series Active Loudspeakers
KLA Series Active Loudspeakers
K Family Accessories
Digital Mixers
TouchMix
™
Series
42
46
84
86
88
92
Q-SYS
™
PLATFORM
2_Touchscreen_Wall_GREY.indd 1 5/16/17 9:22 AM
6 Q-SYS Platform
The World’s Most Powerful Software-Based Platform for Audio, Video & Control
Q-SYS Platform
7
Core 2200 / Core 5200
Q-SYS
™
, QSC’s software-based platform, gives the systems integrator and end user a unified software design tool and feature set suitable for projects of any scale. With the bandwidth to handle even the most complex configurations,
Q-SYS is ready for any job, from boardrooms and hotels to airports and stadiums. Built from the ground up to leverage mainstream IT hardware and networking technology, the Q-SYS Platform runs all audio, video and control processing in a purpose-built Linux kernel with real-time extensions on Intel processing. This Intel hardware meets industry-best reliability standards and is used in many of the world’s most mission-critical projects on a powerful, open,
IT-friendly foundation, the Q-SYS Platform transcends the limitations in scope, performance, and usability that keep other network audio, video and control systems from reaching their full potential.
Local
Inputs
Q-SYS Core
110f
Q-SYS Core
510i
Q-SYS Core
1100
Q-SYS Core
3100
Q-SYS Core
2200*
Q-SYS Core
5200*
8
128
64
64
N/A
N/A
Local
Outputs
8
Local Flex
Channels
AEC
Processors
8
16
Built-In
Networked
Audio I/O
128 x 128
VoIP
Instances
4
USB
Audio I/O
Instances
4
AV-to-USB
Bridging
1
POTS
1
128
64
N/A
N/A
64
96
256 x 256
256 x 256
64
64
†
†
†
†
N/A
N/A
64
N/A
N/A
N/A*
192
128*
512 x 512
512 x 512*
64
64*
†
†
†
†
N/A
N/A*
N/A N/A* 256* 512 x 512* 64* † † N/A*
GPIO
16 x 16
16
16
16
16*
16*
† Available is combined with additional Q-SYS peripheral like the I/O-USB Bridge
* Specification subject to change
Next-Generation Q-SYS Enterprise Cores
For IT customers wishing to deploy audio, video and control (AV&C) solutions as a building-wide service throughout the enterprise, QSC has partnered with Dell ™ to bring an industry-first integration combining the processing capabilities of the Q-SYS real-time operating system with the world-class
Dell R730 server platform resulting in the only IT grade AV&C solution available, built on standard, off-the-shelf IT hardware.
•
Centralized Shared Resource: Take advantage of the corporate infrastructure and place your Q-SYS Cores alongside other building-wide
IT services such as VoIP, UC&C, security and access control servers.
•
Flexibility: Ability to serve all of your meeting, conferencing, presentation and lobby spaces from a single platform designed from the ground up to provide all of your audio, video and control requirements.
•
Simplicity & Familiarity: Leveraging the most ubiquitous and capable processing platform available today, the next-generation Q-SYS
Enterprise Cores utilize common hardware familiar to IT managers worldwide and offer embedded Dell Remote Access Controller (DRAC) for simple integration with existing IT asset management tools.
•
Reliability: World-renowned robust engineering found in the Dell R730 server platform provides IT users with peace of mind that the AV&C solution is built on industry leading hardware, designed to last, with standard features such as dual redundant networking and power supplies.
8 Q-SYS Platform
Q-SYS Platform
9
Core 110f
Unified Core
With an abundance of acoustic
echo cancellation (AEC), raw processing power and networked audio channel count, the Q-SYS Core
110f offers the best cost-to performance ratio of any in-room processing solution available. This smaller core is ideal for: acoustic echo canceling and sound reinforcement in small to large meeting or multipurpose rooms, sound reinforcement in performance venues such as houses of worship and theaters, background music systems, wide area paging in airports, convention centers and hospitals.
•
Class leading I/O: Core 110f has 24 I/O + USB, POTS and VoIP simultaneously offering the best cost-to-I/O ratio in a single SKU, single chassis product available on the market.
•
8 Flex Channels: Nearly all the flexibility of a card-based DSP solution without the hassle of multiple SKU’s and custom ordering.
•
AV-to-USB Bridging Capability: Core 110f provides on-board USB bridging capability (via USB-B port) for audio and Q-SYS PTZ-IP camera feeds to
PCs, ideal for soft-codec application such as Skype for Business
™
,
GoToMeeting
™
and others.
•
True IT Software Integration: The Q-SYS Software platform is a true IT solution that is free of the fixed hardware limitations seen in competing products. It allows for greater functionality such as Layer 3 routing, LDAP contact server integration, SNMP monitoring, and more.
•
Suite of Software-Based Conferencing Technology applications: Built by QSC from the ground up allowing for continued refinement, without minimal requirement for additional hardware. The suite includes next-generation
AEC, multiple-instance SIP softphones, gain sharing and gating automixers.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
Core 510i
NEW
Integrated Core and I/O Expander
Q-SYS ™ Core 510i represents the second generation of QSC’s Integrated
Core Platform. It features eight I/O card slots which can be populated with any combination of Q-SYS I/O cards allowing for up to 128x128 local channels plus a total of 256x256 network channels for diverse connectivity options. Native Q-LAN and AES67 networked audio allows for system expansion using Q-SYS I/O expanders or peripheral devices from 3rd party manufacturers. Core 510i can also be configured via software to behave as an 8 card slot I/O-Frame for connection to any other Core processor for even higher channel density I/O capability.
Core 1100 / 3100
Enterprise Core
These Q-SYS
™
Enterprise Core models are both tailored to meet the demanding needs of large scale installations. Core 1100 (256x256 network channels), and Core 3100 (512x512 network channels) are designed to work with numerous PTZ-IP conference cameras, touch screen controllers, page stations and amplifiers, with each of these multiple peripherals located remotely throughout the venue.
10 Q-SYS Platform
CXD-Q Series Network Amplifiers
Q-SYS Platform
11
CXD4.5Q
Designed specifically for use with the Q-SYS™ Platform, CXD-Q Series amplifiers marry the new amplifier technology found in the CXD Series with the powerful Q-SYS network processing and control system to create the perfect solution for installed applications. The CXD-Q Series includes seven models, three four channel (CXD4.2Q, CXD4.3Q and
CXD4.5Q), and four eight channel (CXD8.4Q, CXD8.4Qn, CXD8.8Q,
CXD8.8Qn). These amplifiers are capable of delivering robust, high-fidelity power to drive a wide range of loudspeaker configurations including 70V and 100V systems.
The “Q” models offer mic/line inputs into the Q-SYS Platform, while the
“Qn” models provide no analog inputs thereby reducing the overall system cost. By simply connecting the amplifiers to a standard Ethernet or IP network, the Q-SYS Core can route audio to/from the amplifiers, as well as provide total control and monitoring of all amplifier functions.
Flexible Amplifier Summing Technology™ (FAST) is available on all models and allows the integrator to combine two, three or up to four amplifier channels together for maximum current and/or voltage output.
CXD8.4Qn
•
Seamless Q-SYS™ integration with audio transport and control via standard Gigabit Ethernet protocols and hardware.
•
Capable of providing up to 8,000 W peak and 5,000 W continuous with
Low-Z, 70V, or 100V direct drive available on all models (except the
CXD4.2Q).
•
CXD-Qn models are “network input only” (no analog inputs) to reduce system cost.
•
Touch-proof Euroblock loudspeaker connections.
•
Flexible Amplifier Summing Technology™ (FAST) permits up to four channels to be combined for higher output power.
•
PowerLight universal switchmode power supply with PFC for highest efficiency, and low weight.
•
Eight bi-directional GPIO connections that can be used for analog or digital inputs or outputs to/from Q-SYS.
•
Built-in energy saving modes ensure that the amplifier will draw the minimum amount of AC power while still providing outstanding audio quality.
12 Q-SYS Platform
4 Independent Channels
A, B, C, D
2 Channels BTL Bridged
A+B or C+D
Doubles Voltage
2 Channels Parallel
AB or CD
Doubles Current
1 Channel 3CH Parallel
ABC
Triples Current
1 Channel Bridged/Parallel
AB+CD
Doubles Current and Voltage
1 Channel 4CH Parallel
ABCD
Quadruples Current
8Ω
4Ω
2Ω
8Ω
4Ω
2Ω
2Ω
8Ω
4Ω
2Ω
8Ω
4Ω
2Ω
2Ω
8Ω
4Ω
70 V
100 V
8Ω
4Ω
1200 W
500 W
950 W
1800 W
1600 W
2500 W
NR*
500 W
1000 W
1700 W
CXD4.2Q
CXD4.3Q
Peak
N/A
Peak
500W
N/A
500 W
625 W
900 W
700 W
625 W
1200 W
1500 W
NR*
500 W
950 W
1400 W
1200 W
2400 W
NR*
NR*
1300 W
2000 W
2500 W
1400 W
2400 W
3500 W
3500 W
5000 W
NR*
1400 W
3000 W
5000 W
NR* = Not Recommended due to excessive current draw
BOLD = Optimal configuration for the load and channel count
CXD4.5Q
Peak
1000W
1250 W
1200 W
2000 W
1600 W
4000 W
NR*
NR*
1250 W
2400 W
4000 W
1400 W
2500 W
4500 W
4500 W
7500 W
NR*
1600 W
3000 W
5300 W
8 Independent Channels
A, B, C, D, E, F, G, H
2 Channels Combined in
BTL Bridge A+B or C+D or
E+F or G+H Doubles Voltage
2 Channels Combined in Parallel
AB or CD or EF or GH
Doubles Current
3CH Combined in Parallel
ABC or EFG
Triples Current
4CH Combined in Bridged/Parallel
AB+CD
Doubles Current and Voltage
4CH Combined in Parallel
ABCD or EFGH
Quadruples Current
2Ω
8Ω
4Ω
2Ω
70 V
100 V
8Ω
4Ω
8Ω
4Ω
2Ω
8Ω
4Ω
8Ω
4Ω
2Ω
2Ω
8Ω
4Ω
2Ω
NR* = Not Recommended due to excessive current draw
BOLD = Optimal configuration for the load and channel count
Q-SYS Platform
CXD8.4Q /
CXD8.4Qn
Peak
500 W
500 W
500 W
500 W
500 W
1000 W
NR*
NR*
1000 W
1000 W
1000 W
1000 W
1500 W
1500 W
2000 W
2000 W
NR*
1200 W
2000 W
2000 W
CXD8.8Q /
CXD8.8Qn
Peak
850 W
850 W
850 W
1000 W
600 W
2000 W
NR*
NR*
1100 W
1800 W
2000 W
1100 W
1800 W
2800 W
3600 W
4500 W
NR*
1200 W
2200 W
4000 W
13
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
AV-to-USB Bridging Solution
Q-SYS Platform 15
NEW Q-SYS PTZ-12x72 / PTZ-20x60
• Highest-quality HD Imaging: These two 1080p Pan, Tilt, and Zoom (PTZ) conference room cameras cover all room types. The PTZ-12x72 is ideal for small and wide rooms, providing a wide 72° horizontal field of view and
12x optical zoom lens. The PTZ-20x60 is ideal for larger, longer room with a 20x optical zoom lens with a 60° horizontal field-of-view.
• Eliminates USB Limitations: A single PoE Ethernet cable simplifies the installation of these network cameras, allowing you to install as many cameras as you need to cover any room or an entire campus. When combined with the networked I/O USB Bridge, you can offer end users
USB audio and video feed access points anywhere on the system. Q-SYS bridging peripherals allow you to simultaneously connect virtually any number of PCs to these cameras without complicated and expensive USB switches or extenders.
• Simplified Control: View and control video camera feeds from any Q-SYS user control interface. System designers can customize the camera controls to meet their needs, from simple automated conference room use to more comprehensive switching and monitoring controls.
16 Q-SYS Platform
AV-to-USB Bridging Solution
Q-SYS Platform
17
NEW
Q-SYS I/O USB Bridge
•
Standard USB 2.0 Driverless connection: The Q-SYS AV-to-USB Bridging solution leverages standard UAC and UVC USB drivers for USB audio and video. No additional software or drivers are required to make the solution work with modern PC operating systems and soft codec applications such as Skype for Business
™
, GoToMeeting
™
and others.
•
AV Access Everywhere: Small enough to fit anywhere you need USB access into your Q-SYS installed room AV systems. These PoE network devices provide USB access to a host PC or other user device.
•
Eliminates USB Limitations: Eliminate the need for complicated and expensive USB switches and extenders for Q-SYS USB/BYOD connectivity. Being a small PoE network peripheral, I/O-USB Bridges can easily be mounted closely to every USB host that needs Q-SYS AV access.
•
Redundancy: The I/O-USB Bridge provides two network ports for fully redundant connectivity.
NEW
I/O-8 Flex Channel Expander
The I/O-8 Flex allows for analog I/O deployment to a Q-SYS system either in the rack or remotely located near the source or destination device using only a single, PoE+ network cable.
As part of the Q-SYS Platform, the I/O-8 Flex is fully supported by all
Q-SYS Core processors, making it a cost effective expander for the smaller Unified and Integrated Core series. Furthermore, when paired with the Enterprise Cores, the I/O-8 Flex makes it simple to realize a truly centralized processing system.
•
Q-SYS Flex I/O Channels: Eight channels of analog I/O that can be configured real-time in software as either a Mic/Line input with phantom power or line level output with single channel granularity.
•
USB Audio Bridging: A single USB-B device port allows for hassle-free soft codec integration with the Q-SYS platform either at the rack or remotely in typical BYOD applications.
•
Onboard Control I/O: 8x8 GPIO and one RS232 allow for additional in-room control options.
•
PoE+ with Auxiliary Power Supply Input: PoE+ streamlines the workflow of the system designers and installers ensuring that it is both simple and cost effective to deploy anywhere on a standard IT network.
18 Q-SYS Platform
Control Peripherals
Q-SYS Platform
19
I/O Frame
The Q-SYS I/O-Frame and Q-SYS Core 510i (in I/O-Frame mode) provide remote points of connection that interface Q-SYS with other components in the system, including microphones, mixers and power amplifiers. The I/O-Frame offers four available card slots and up to 16x16 audio I/O while the Core 510i
(in I/O-Frame mode) offers eight available card slots and up to 128x128 channels of audio connectivity.
I/O-22
Providing two mic/line inputs and two line outputs, the I/O-22 is ideal for applications such as legislative or judicial chambers, meeting rooms, ballrooms, ancillary zones, classrooms, VIP suites, and stage patching.
•
Connects directly to the Gigabit Ethernet network via redundant Q-LAN ports (RJ-45 Ethernet connectors).
•
Powered via PoE (Power over Ethernet) or 24 VDC.
•
Includes an 8.5 watt mono amplifier to drive a local monitor speaker.
•
Other connections include a scriptable RS-232 port and eight
GPIO ports.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
TSC-7t Tabletop Touch Screen Controller
•
Consolidate Dialing and Control: In addition to the dialing functionality for your conferences, this 7" screen (800px x 480px) can be used to control a myriad of third-party devices prevalent in boardrooms and meeting rooms via the Core (no additional control processor required).
•
BYOD Bridging Options: Allows meeting participants to interface 2-way audio from Q-SYS to UC or web conferencing applications like Skype for Business™ and Go-to-Meeting™ via the touchscreen’s micro
USB connection.
•
Capacitive Touch Technology: Eliminates physical knobs and buttons increasing product reliability.
•
Single Drop PoE cabling: Ethernet connection for simplified wire terminations without the need for additional power wiring.
•
Redundancy Options: TSC-7t provides two network ports for connection full control redundancy.
•
Table Mounting System: Carefully designed weighted base with rubber pad prevents the touch screen from sliding, while the included threaded brass mounting post offers permanent through-table mounting with clean cable management.
20 Q-SYS Platform
Q-SYS Platform
21
TSC-7w Wall-mount Touch Screen Controller
•
Configurable Wall-Mounted Control: This 7” screen (800px x 480px) can be used to control a myriad of third-party devices prevalent in boardrooms and meeting rooms via the Core (no additional control processor required).
•
Capacitive Touch Technology: Eliminates physical knobs and buttons increasing product reliability.
•
Single Drop PoE Cabling: Ethernet connection for simplified wire terminations without the need for additional power wiring.
•
Redundancy Options: TSC-7w provides two network ports for full control redundancy.
TSC-47w-G2 Wall-mount Touch Screen Controller
•
High Resolution Display: High resolution 960x540 full color LCD display with in-plane switching technology for improved off-axis viewing.
•
Versatile: Ability to operate in portrait or landscape orientation.
•
Universal Mounting Options: Included accessories for mounting to standard US and European wall and junction boxes.
•
Capacitive Touch Technology: Eliminates physical knobs and buttons increasing product reliability.
•
Single Drop PoE Cabling: Ethernet connection for simplified wire terminations without the need for additional power wiring.
22 Q-SYS Platform
I/O Cards
Mic/Line Analog Input Card
Analog Line Output Card
AES-3 Digital Input/Output Card
AES-16 Digital Output Card
DataPort ™ Output Card
Dante ™ Network Audio Bridge Card
AVB Audio Bridge Card
CobraNet
™
Input/Output C ard
I/O Cards
The following cards are available for Q-SYS Integrated & Enterprise
Cores, as well as the I/O Frames:
•
Mic/Line Analog Input Card (CIML4/CIML4-HP): Four channels of mic/linelevel analog audio input with 48 V phantom power. This card provides standard inputs for sources like for microphones, mixers and CD/DVD players. The input card is also available in a high performance version
(CIML4-HP) featuring broadcast quality pre-amps and A/D converters.
•
Analog Line Output Card (COL4): Four channels of balanced, line level analog output for interfacing between Q-SYS devices and teleconference systems.
™ and outboard equipment such as non-network amplifiers amplifiers, recording
Q-SYS Platform
23
•
AES-3 Digital Input/Output Card (CAES4): Four input and four output channels of AES-3 digital audio for interfacing between Q-SYS and digital devices such as mixing consoles and recording devices.
•
AES-16 Input Card (CIAES-16): 16-channel AES/EBU (AES3) 24-bit digital input Q-SYS peripheral card that utilizes IT industry standard RJ45 connectors.
•
DataPort Output Card (CODP4): Four audio output channels
(2 DataPorts) for connection to DataPort equipped QSC amplifiers. The
DataPort interface allows audio, status monitoring, and control between
Q-SYS and QSC DataPort power amplifiers.
•
CobraNet
™
Digital Input/Output Card (CCN32): Input/output interfacing with legacy CobraNet-based audio networks. The CobraNet card allows for several operating modes, 4x4, 8x8, 16x16, when used in an I/O Frame or up to 32 x 32 when used in a Core or high channel density
Q-SYS I/O Expander.
•
Dante
™
Audio Bridge Card (CDN64): Provides a bridge for up to 64 x 64 channels of Dante audio in to the Q-SYS platform for redistribution over larger LAN and WAN IT infrastructures.
•
AVB Audio Video Bridge Card (CAN32): Provides a digital bridge between any 100mb AVB 1722.1 compliant edge network and the Q-SYS
Platform. The CAN32 can support 32 total channels at 48 kHz in three available operating modes: 0/32, 32/0 or 16x16.
24 Q-SYS Platform
Public Address Peripherals
Q-SYS ™ offers a suite of tools that provide sophisticated paging and messaging functionality to support any-sized paging application including convention centers, transportation terminals, theme parks and more. Q-SYS offers a number of paging-specific advantages that sets it apart from alternative approaches:
•
Simple, integrated platform: Q-SYS enables paging with simplified bills of material including playback, record, and store-and-forward.
•
Ample paging capacity: With Cores supporting up to 1024 total network channels.
•
Page Stations: Built to withstand the rigors of daily use, all page stations are powered over Ethernet and offer secure access, high-fidelity gooseneck or handheld microphones, and capacitive touch buttons.
•
PA Router: Supports live and delayed paging, scheduled messaging, announcement recording, live page routing, triggered playback, and event scheduling.
PS-1600G
Q-SYS Networked Page Stations
Available with either gooseneck or handheld microphone (push to talk), the Q-SYS Networked Page Station is a dual-port network device that is fully configurable from Q-SYS Designer Software. Each station connects to a Q-SYS system via Q-LAN, which handles all audio deliveries to and from the station. Four Networked Page Station models are currently available:
•
PS-1600H/G: 16 buttons total, including four command buttons (command code A-D). Also includes a numeric keypad and supports security features including automatic logoff time out, logon requirements, and user restrictions.
•
PS-1650H/G: 16 command buttons
(command code A-P).
PS-1650H
Q-SYS Platform
25
All Page Stations feature:
•
Two Q-LAN network interfaces enabling connection to two switch ports or deployment on two separate networks.
•
Capacitive touchpad that offers visible feedback and audible cues including illuminated status indicators.
•
Built-in 240 x 64 monochrome graphics LCD display.
•
Powered via PoE (Power over Ethernet) or external 24VDC.
•
Rear panel auxiliary audio inputs can accommodate a secondary microphone.
•
Auxiliary output can drive a local amplifier, powered loudspeaker or other destination device.
•
GPIO interface can be configured to use external events to affect paging operation or be the source of events to affect external control systems.
•
Designed for both desktop and wall-mounted installation and include either handheld (H) or gooseneck (G) microphone.
PS-X
A handheld paging accessory for any Q-SYS ™ Page Station provides a secondary remote microphone and is designed to fit into a standard U.S. 2-gang wall box.
PS-X Paging Accessory
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
AMPLIFIERS
28 Amplifiers
SPA Series Amplifiers
The SPA Series are half rack 1RU, convection cooled power amplifiers, delivering two or four channels of power that can be bridged to supply up to 350W per channel pairs into 70V or 100V. The SPA2-60 and SPA4-60 will deliver 60 watts per channel, while the SPA4-100 will deliver 100 watts per channel and SPA2-200 will deliver up to 200 watts per channel into 4Ω and 8Ω. Utilizing an advanced Class-D amplifier design and
Universal Power Supply, the SPA Series are amazingly efficient, allowing them to be convection cooled and ENERGY STAR ® qualified with quiet auto-ramp standby functionality. SPA Series amplifiers are housed in an unobtrusive 1/2 RU chassis with unique mounting hardware enabling rack, table and wall mounting capabilities.
•
Up to 200 watts into 4Ω and 8Ω, and up to 350 watts into
70V and 100V.
•
ENERGY STAR
®
qualified amplifier: Efficient class-D amplifiers that conserve energy and require no active cooling, so they reduce operational costs.
•
Bridgeable outputs for higher power: Bridging the outputs of the
SPA Series amplifiers provide up to 400 watts into low impedance, and 350 watts into 70V or 100V offering outstanding flexibility.
•
Auto-Ramp provides quiet startup and power-down: The
ENERGY STAR
®
Auto-Ramp circuitry ensures quiet and fast power up from Standby and seamless power-down following 25 minutes of inactivity, dramatically reducing power consumption.
•
Rack-mountable 1U, half rack width enclosure: Can be mounted in 1/2 RU reducing rack space requirements. In addition their clever joining “brackets” enable easy under-table and wall-mounting.
Amplifiers 29
Stereo Mode
8
Ω
4
Ω
Bridged Outputs
8
Ω & 4Ω
70V
100V
SPA2-60
60 W
60 W
200 W
250 W
250 W
SPA4-60
60 W
60 W
200 W
250 W
250 W
*Burst Power - dependant on other channel loads
SPA2-200 SPA4-100
200 W
200 W
100 W
100 W
400 W
350 W
350 W
200 W
350 W*
350 W*
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
30 Amplifiers
CXD Series Processing Amplifiers
Representing a revolutionary advancement in amplifier design, CXD Series amplifiers feature powerful onboard DSP and deliver robust, high fidelity power housed in a 2RU chassis. Designed with integrators in mind, the
CXD Series includes three models (CXD4.2, CXD4.3 & CXD4.5) capable of driving a wide range of loudspeaker configurations including 70V and
100V systems. Flexible Amplifier Summing Technology
™
(FAST) actively distributes total amplifier power across one, two, three or all four outputs enabling amp channels to be paralleled or bridged for maximum current and voltage output.
•
Up to 5,000W continuous and 8,000W peak with 70V/100V direct drive on the CXD4.3 and CXD4.5.
•
Flexible Amplifier Summing Technology™ (FAST) permits total amplifier power to be distributed across one, two, three or all four channels.
•
Onboard full function loudspeaker processing including Crossover,
EQ, Limiting and Alignment Delay eliminate the need for outboard loudspeaker processors.
•
Intrinsic Correction™ ensures optimum sonic performance of
QSC loudspeakers.
•
Preset Wizard simplifies setup, providing system design tools and loudspeaker selection.
•
Factory presets can be used as is, or modified and stored as one of 50 user presets.
•
Four Euroblock inputs and Four Euroblock touch-proof speaker outputs.
•
PowerLight universal switchmode power supply with Power Factor
Correction for highest efficiency, improved audio performance, and low weight.
Amplifiers 31
4 Independent Channels
A, B, C, D
2 Channels BTL Bridged
A+B or C+D
Doubles Voltage
2 Channels Parallel
AB or CD
Doubles Current
1 Channel 3CH Parallel
ABC
Triples Current
1 Channel Bridged/Parallel
AB+CD
Doubles Current and Voltage
1 Channel 4CH Parallel
ABCD
Quadruples Current
CXD4.2
Peak
N/A
N/A
500 W
700 W
625 W
1200 W
1500 W
NR*
500 W
950 W
1200 W
500 W
950 W
1800 W
1600 W
2500 W
NR*
500 W
1000 W
1700 W
8Ω
4Ω
2Ω
8Ω
2Ω
8Ω
4Ω
2Ω
4Ω
2Ω
8Ω
4Ω
2Ω
2Ω
8Ω
4Ω
70 V
100 V
8Ω
4Ω
CXD4.5
Peak
1000W
1250 W
1200 W
2000 W
1600 W
4000 W
NR*
NR*
1250 W
2400 W
4000 W
1400 W
2500 W
4500 W
4500 W
7500 W
NR*
1600 W
3000 W
5300 W
CXD4.3
Peak
500W
625 W
900 W
1400 W
1200 W
2400 W
NR*
NR*
1300 W
2000 W
2500 W
1400 W
2400 W
3500 W
3500 W
5000 W
NR*
1400 W
3000 W
5000 W
NR* = Not Recommended due to excessive current draw
BOLD = Optimal configuration for the load and channel count
•
Four Euroblock inputs and Four Euroblock touch-proof speaker outputs.
•
PowerLight universal switchmode power supply with Power Factor
Correction for highest efficiency, improved audio performance, and low weight.
•
Amplifier Navigator software (via USB connection) running on a PC or
Mac for control, monitoring, and amplifier management. Amp Navigator also provides on-line and off-line editing of Presets and Speaker Profiles along with library management.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
32 Amplifiers
CX Series Amplifiers
Amplifiers
CX Series is a line of two, four and eight channel amplifiers designed for installation applications requiring premium sound quality and high output.
Recognized by sound contractors worldwide for their reliability, CX Series amplifiers feature PowerLight
™
power supply technology reducing weight, eliminating AC mains hum and improving audio quality. The highly efficient power supply also draws less power and produces less heat resulting in added energy savings. They also feature advanced amplifier control and monitoring for Q-SYS
™
Platform.
•
Active inrush limiting gently brings amplifiers on-line eliminating the need for costly AC power sequencers.
•
Front-panel gain controls with 1 dB detents allow for precise level adjustment and are protected by tamper-proof security covers.
•
DataPort connections enable remote control and monitoring of amplifier functions via Q-SYS
™
.
•
Selectable clip limiters and infra-sonic filters protect loudspeakers from damage due to distortion and overexcursion.
•
DataPort or EuroBlock Connector Inputs and touch-proof barrier-strip outputs (2 ch models also include XLR inputs and 8 channel models feature EuroBlock Connector Outputs).
•
Sleep (Standby) mode for energy saving efficiency.
•
Transformer-less 70 /100 volt models available.
CX 2-channel models
CX 4-channel models
CX 8-channel models
Watts per channel
Model
CX302V
CX602V
CX1202V
CX302
CX502
CX702
CX902
CX1102
CX204V
CX254
CX404
CX108V
70 V*
250
440
1000
–
–
–
440
1000
220
–
–
100
8
Ω
–
550
700
200
300
425
550
700
–
170
250
–
4
Ω
–
–
1100
325
500
700
900
1100
–
250
400†
–
CX168 – 90 130 –
All channels driven. 20 Hz – 20 kHz, 0.05% THD *1 kHz, 0.05% THD
†1 kHz, 0.1% THD
–
–
1500
1700
–
450
–
–
2
Ω*
–
600
800
1200
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
33
34 Amplifiers
PowerLight
™
3 Series Amplifiers
Amplifiers
PowerLight 3 Series are our “Ultimate Analog” amplifiers, designed for the most demanding concert and live-sound reinforcement applications. All models (PL380 and PL340) feature the PowerLight ™ power supply technology reducing weight, eliminating AC mains hum and improving audio quality. With zero signal latency with select QSC processors for seamless integration and flawless loudspeaker alignment, the PowerLight 3 Series architecture provides users the choice of comprehensive, networked remote control, monitoring and DSP or the cost savings of a simple, straightforward analog input configuration.
•
Class D (PL380) and class H (PL340) topology provide efficient high power performance.
•
Three-position Input Sensitivity switch simplifies integration of
PowerLight 3 amplifiers into existing amp racks and power systems.
•
User defeatable clip limiters and selectable low-frequency filters
(30 Hz, 50 Hz, Bypass).
•
DataPort connection supports external amplifier control.
•
XLR and block input connectors and Binding post or Neutrik speakON
®
Output connectors.
•
Comprehensive internal protection protects amplifiers and loudspeakers against over-current, over-temperature and clipping – without compromising program signal.
PL380
PL325 and PL340
Model
PL340
PL380
Watts per channel
8
Ω
800
1500
4
Ω
1250
2500
EIA 1 kHz, 1% THD
*Burst mode testing required due to AC service current limitations
2
Ω
2000
4000*
35
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
36 Amplifiers
CMXa Series Amplifiers
Amplifiers 37
CMXa Series amplifiers represent an economical and rugged power amplifier solution for installed sound applications. There are four CMXa models to choose from (CMX 300Va, CMX 500Va, CMX 800Va, and CMX 2000Va).
Flexible input and outputs connectors make them ideal for use in projects such as performance halls, houses of worship, sport clubs, gymnasiums, dance venues, pubs, and FGM/BGM systems. CMXa Series provides unmatched performance and user options at an affordable price point.
•
Flexible output loading options enable low impedance loads comfortably down to 2Ω, and in some configurations will effortlessly drive 70V /100V lines.
•
Recessed front panel gain controls with 1 dB detents for fast and accurate level settings.
•
Security plate cover for gain controls to provide tamper-proof protection.
•
Recessed rear DIP switches for easy selection between stereo, parallel, or bridged mode operation, and the additional choice of enabling/disabling low frequency filter protection.
•
Balanced XLR, TRS or Barrier Strip parallel inputs and NL4 or detachable block output connectors.
CMXa 2RU Models
CMX 2000Va (3RU Model)
Model
CMX 300Va
Watts per channel
Stereo
70V
-
100V
-
CMX 500Va
CMX 800Va
-
400
-
-
CMX 2000Va 2500 1000
Bridged Stereo Bridged
70V
600
100V
-
8
Ω
200
4
Ω
300
2
Ω*
430
4
Ω*
830
1200 600
2000 2300
-
300
500
500
800
700
1200
1400
2400
3600 1100 2000 2500 5000
1 kHz, 0.1% THD *1 kHz, 1% THD
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
38 Amplifiers
ISA Series
Amplifiers
ISA Series amplifiers are an ideal, cost-effective solution for fixed installation applications requiring distributed loudspeakers. There are seven models in the line, four low impedance models (ISA 280, ISA 450, ISA
750, ISA 1350) rated down to 2-ohm loads and three “Ti” versions (ISA
300Ti, ISA 500Ti, ISA 800Ti) featuring isolated transformers for 25, 70 and 100 volt distributed audio systems. The DataPort V2 Lite connection facilitates the use of amplifier accessories (XC-3, LF-3 and SF-3) providing economical crossover and subwoofer filtering solutions.
•
Up to 2400W total output power.
•
3RU chassis with rear-mounted gain controls featuring 2 dB detents.
•
Independent, defeatable clip limiters reduce distortion and protect speakers.
•
Selectable high-pass filters protect against transformer saturation and driver overexcursion.
•
Includes extensive DC, infrasonic, thermal overload, and short circuit protection.
•
XLR and 3-pin block input connectors and touch-proof barrier-strip outputs.
ISA 500Ti
Model
ISA280
ISA450
ISA750
ISA1350
ISA300Ti
ISA500Ti
ISA800Ti
Watts per channel
70V* / 100V
-
-
-
1500††
300
500
800
8
Ω**
185
260
450
800
185
260
450
4
Ω**
280
425
650
1300
280
425
650
*50 Hz – 16 kHz, 0.5% THD **20 Hz – 20 kHz, 0.1% THD †1 kHz, 1% THD
††Direct Output, 70V, less than 0.1% THD, 20 Hz – 20 kHz, +0/-0.3 dB
2
Ω†
430
700
1200
2000
430
700
1200
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
39
AcousticCoverage
™
Series
Distributed Applications
Installation Value Series
LOUDSPEAKERS
AcousticPerformance
TM
Series
Performance Applications
Installation Point-and-Shoot
AcousticDesign
TM
Series
Distributed Applications
Installation Premium Series
ILA Series
Performance Applications
Installation Line Array
42 Loudspeakers
AcousticCoverage
™
Ceiling-mount
Series Loudspeakers
Loudspeakers 43
AcousticCoverage
™
Series is designed to offer integrators a cost effective solution for applications where voice reinforced coverage is of primary concern, while providing improved musicality often not seen in typical BGM class products. Applications for AccousticCoverage Series loudspeakers include wide area paging systems, background music, distance conferencing reinforcement, healthcare facilities, concourses, transportation terminals and more.
•
High quality transducers provide exceptional clarity through the critical voice range.
•
Ported baffle for increased low frequency extension.
•
Low saturation 70/100V transformers with 8 ohm bypass.
•
4-pole Euroblock connector eases system wiring.
•
Advanced voicing filter sets using Intrinsic Correction
™
available through either the Q-SYS
™
Platform or CXD Series amplifiers.
•
White (RAL 9010) with UV inhibitors to match complimenting
QSC loudspeaker series.
•
Complete EASE, CAD & BIM information available online.
AC-C2T
Frequency Range (-10 dB) 80 Hz – 20 kHz
Power Capacity 1
Broad-Band Sensitivity
2
16 W
86.5 dB
Coverage Angle 150° (500 Hz - 5 kHz)
Output
3
(Peak SPL @ 1M) 104.5 dB
Driver Information 2.5" Polypropylene cone with butyl rubber surround
AC-C4T
70 Hz – 16 kHz
16 W
89 dB
140° (500 Hz - 5 kHz)
107 dB
4.5" Polypropylene cone with butyl rubber surround
Rated Impedance
Input Connectors
Baffle Material
Cut-out Dimension
Product Dimension
8 ohm
Euroblock connector with parallel output terminals
Painted ABS polymer
Ø 7.3” (Ø 186 mm)
Ø 8.4” x 7.9”
(Ø 214 x 201 mm)
TBD Net Weight
1 IEC60268-1 noise signal for 2 Hrs.
2 On-Axis, free-field sensitivity, 2.83V, 1 m
3 Calculated from rated noise voltage and sensitivity.
8 ohm
Euroblock connector with parallel output terminals
Painted ABS polymer
Ø 7.3” (Ø 186 mm)
Ø 8.4” x 7.9”
(Ø 214 x 201 mm)
4.9 lbs / 2.22 kg
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
44 Loudspeakers
AcousticCoverage
™
Ceiling-mount
Series Loudspeakers
Non-UL Versions
Loudspeakers 45
Frequency Range (-10 dB)
Power Capacity 1
Broad-Band Sensitivity 2
Coverage Angle
AC-C6T
65 Hz – 20 kHz
30 W
89 dB
110° (500 Hz - 5 kHz)
Output
3
(Peak SPL @ 1M)
Driver Information
LF
HF
110 dB
LF: 6.5" Polypropylene cone with butyl rubber surround
Rated Impedance
Input Connectors
HF: 0.86" silk dome tweeter, coaxially mounted
8 ohm
Euroblock connector with parallel output terminals
Baffle Material
Cut-out Dimension
Product Dimension
Painted ABS polymer
Ø 9” (Ø 229 mm)
Ø 10.24” x 8.4”
(Ø 260 x 213 mm)
Net Weight 7.6 lbs / 3.5 kg
1 IEC60268-1 noise signal for 2 Hrs.
2 On-Axis, free-field sensitivity, 2.83V, 1 m
3 Calculated from rated noise voltage and sensitivity.
AC-C8T
52 Hz – 20 kHz
80 W
89 dB
100° (500 Hz - 5 kHz)
114 dB
8" Treated paper cone
0.86” Silk dome tweeter
8 ohm
Euroblock connector with parallel output terminals
Painted ABS polymer
Ø 11.2” (Ø 285 mm)
Ø 12.4” x 11.3”
(Ø 316 x 288 mm)
11.5 lbs / 5.2 kg
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
AC-C4T-NB
Frequency Range (-10 dB) 62 Hz – 18 kHz
Power Capacity
Broad-Band Sensitivity 2
Coverage Angle
1 6 W
93 dB
140° (500 Hz - 5 kHz)
Output
3
(Peak SPL @ 1M) 107 dB
Driver Information 4" Treated paper cone
AC-C8T-NB
53 Hz – 20 kHz
6 W
96 dB
130° (500 Hz - 5 kHz)
110 dB
8" Treated paper cone
Rated Impedance
Input Connectors
Baffle Material
Cut-out Dimension
Product Dimension
Net Weight
8 ohm 8 ohm
Bare wire transformer taps Bare wire transformer taps
Painted ABS polymer
Ø 9” (Ø 228 mm)
Ø 10.25” x 5.8”
(Ø 260 x 148 mm)
2.6 lbs / 1.2 kg
1 IEC60268-1 noise signal for 2 Hrs.
2 On-Axis, free-field sensitivity, 2.83V, 1 m
3 Calculated from rated noise voltage and sensitivity.
Painted ABS polymer
Ø 11.06” (Ø 281 mm)
Ø 12.3” x 4.2”
(Ø 313 x 107 mm)
3.4 lbs / 1.5 kg
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
46 Loudspeakers
AcousticDesign
™
Ceiling-mount
Series Loudspeakers
Loudspeakers 47
The second generation of AcousticDesign
™
Series ceiling-mount loudspeakers are high quality 70/100V, two-way, full-range systems ideal for a wide variety of foreground, background, paging, and distance-conferencing applications.
Designer Friendly:
•
Available in white (RAL 9010) or black (RAL 9011).
•
Paintable grill & bevel.
•
Deliberate 23mm bezel width to match T-bar.
•
Complete EASE, CLF, CAD & BIM information.
Application Diverse:
•
UL Listed (UL 1480 / UL2043).
•
EN54-24 for use in Voice Alarm Systems.
•
UV Inhibitors in all white models.
•
Powder coated grills.
•
Weather-treated cones.
Install Ready
•
SnapFit magnetic grills.
•
Low saturation 70/100V transformers.
•
16 ohm low impedance bypass.
•
3x long-travel dog-ears.
•
Screw-down Euro block connector with loop-through.
•
Removable conduit cover with no loose screws.
•
Low profile, short back-can versions available.
Factory Optimized:
•
DMT (Directivity Matched Transition
™
): Ensures smooth, uniform frequency response over the rated coverage area.
•
Intrinsic Correction
™
: Factory voicings available of CXD amplifiers and
Q-SYS Designer Software - delivers repeatable performance from project to project.
48 Loudspeakers
AcousticDesign
™
Ceiling-mount
Series Loudspeakers
Loudspeakers
AD-C4T-BK
AD-C4T-WH
Frequency Range (-10 dB) 70 Hz – 20 kHz
Power Capacity
1
System Sensitivity 2
Coverage Angle
30 W
87.5 dB
150° conical DMT
Output 3 (Peak SPL @ 1M) 108 dB
Driver Information
LF 4.5” weather resistant paper cone woofer
HF
Rated Impedance
Input Connectors
0.75” aluminum dome tweeter
16 ohm
4-pin Euro terminals
Cut-out Dimension Ø 7.68” (Ø 195 mm)
Product Dimension
Ø 9.06” x 6.93”
(Ø 230 x 176 mm)
6.4 lb / 2.9 kg Net Weight
1 IEC60268-1 noise signal for 2 Hrs.
2 On-Axis, free-field sensitivity, 2.83V, 1 m
3 Calculated from rated noise voltage and sensitivity.
AD-C4T-LP
70 Hz – 20 kHz
30 W
87 dB
150° conical DMT
108 dB
4.5” weather resistant paper cone woofer
0.75” aluminum dome tweeter
16 ohm
4-pin Euro terminals
Ø 9.65” (Ø 245 mm)
Ø 11.02” x 3.93”
(Ø 280 x 100 mm)
6.6 lb / 3 kg
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
AD-C6T-BK
AD-C6T-WH
Frequency Range (-10 dB) 65 Hz – 20 kHz
Power Capacity
1
System Sensitivity 2
Coverage Angle
60 W
88 dB
135° conical DMT
Output 3 (Peak SPL @ 1m) 112 dB
Driver Information
LF 6.5” weather resistant paper cone woofer
HF
Rated Impedance
Input Connectors
0.75” aluminum dome tweeter
16 ohm
4-pin Euro terminals
Cut-out Dimension
Product Dimension
Ø 9.65” (Ø 245 mm)
Ø 11.02” x 9.32”
(Ø 280 x 237 mm)
9.5 lb / 4.3 kg Net Weight
1 IEC60268-1 noise signal for 2 Hrs.
2 On-Axis, free-field sensitivity, 2.83V, 1 m
3 Calculated from rated noise voltage and sensitivity.
AD-C6T-LP
65 Hz – 20 kHz
60 W
88 dB
135° conical DMT
112 dB
6.5” weather resistant paper cone woofer
0.75” aluminum dome tweeter
16 ohm
4-pin Euro terminals
Ø 12” (Ø 305 mm)
Ø 13.37” x 3.95 ”
(Ø 340 x 100 mm)
9.3 lb / 4.2 kg
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
49
50 Loudspeakers
AcousticDesign
™
Ceiling-mount
Series Loudspeakers
Loudspeakers
AD-C820R/S | AD-C821R/S
The AD-C820R/S and AD-C821R/S (R for Round Grill and S for Square
Grille) loudspeaker systems are designed for ceiling mounted loudspeaker applications requiring high SPL output. The AD-C820R/S Systems ship with the AD-C800BB backcan and are perfect for pre-installed applications.
The AD-C821R/S Systems incorporate a fully integrated, factory sealed enclosure and use “dog-ear” style mounting - perfect for blind mount installations. Both models also include a set of tile rails and C-rings to complete the installation.
•
8" low-frequency woofer with 1.4" diaphragm coaxially-mounted compression driver.
•
52Hz – 18kHz frequency range.
•
200W continuous power rating.
•
90˚ conical coverage.
•
70V/100V multi-tap transformer included with low impedance bypass.
•
Ceramic input screw terminal complies with European safety standards.
•
AD-C820 transducer/baffle assembly for separated backcan installation.
•
AD-C821 designed as a fully integrated blind-mount system.
•
UL listed (UL1480 and UL2043).
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
Effective frequency range
1
Power Capacity
1
Sensitivity
2
Nominal Coverage
Output 3 (Peak SPL @ 1M)
Driver Information
LF
AD-C820/C821
52 Hz – 18 kHz
200 W (100 hrs)
91 dB
90° conical
120 dB
8" weather resistant, treated cone woofer
HF
Rated Impedance
Input Connectors
Enclosure
Net Weight (each)
1.4" co-axial compression driver
16 ohm
AD-C820: Ceramic block
AD-C821: 4-pin Euroblock
Fire protective sub-chamber
UL-rated steel backcans
17.5 lb / 7.9 kg
1 Continuous IEC specified test signal, 2 hours unless otherwise stated.
2 Based on nominal impedance, measured in full space. 1 W @ 1 m.
3 Calculated using specified power capacity and system sensitivity. 6 dB peakto-average signal ratio assumed.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
51
52 Loudspeakers Loudspeakers 53
AD-C1200
The AD-C1200 loudspeaker system is designed for ceiling mounted loudspeaker applications requiring high SPL output. The AD-C1200 features coaxial LF/HF transducers, a transformer and a crossover network factory-mounted on a steel baffle. The baffle is designed to mount to the QSC enclosure (AD-C1200BB) or to any 2.5' enclosure using industry-standard transducer / baffle mounting points.
AD-C81Tw
The AD-C81Tw is a ceiling mounted subwoofer designed for use with both ceiling-mount and surface mounts AcousticDesign loudspeakers. Like the smaller format, full-range models, the AD-C81Tw utilizes dog-ear mounting tabs and ships complete with C-rings and tile rails.
AD-C81Tw
Frequency Range (-10 dB) 28 Hz – 208 Hz
AD-C1200
37 Hz – 18 kHz
Power Capacity
1
250 W (100 hrs) 300 W (100 hrs)
System Sensitivity 2
Coverage Angle
94 dB
N/A
93 dB
85° conical
Output 3 (Peak SPL @ 1M) 118 dB
Driver Information
LF
HF
8" weather resistant, polypropelene cone woofer, rubber surround
N/A
124 dB
12" weather resistant, treated cone woofer, 75 mm voice coil, ferrite magnet
Rated Impedance 8 ohm
1.75" co-axial compression driver
16 ohm
Input Connectors
Ceramic block or 4-pin Euro terminals, fire protective sub-chamber
Ceramic block terminals
Fire protective sub-chamber
Cut-out Dimension Ø 11.65” (Ø 296 mm)
Product Dimension
Enclosure
Net Weight (each)
Ø 12.6” x 14.8”
(Ø 321 x 377 mm)
Steel back can
7.5 lb / 3.4 kg
1 Continuous IEC specified test signal, 2 hours unless otherwise stated.
2 Based on nominal impedance, measured in full space.
1 W @ 1 m.
3 Calculated using specified power capacity and system sensitivity. 6 dB peak-to-average signal ratio assumed.
78 lb / 35.3 kg
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
54 Loudspeakers
AcousticDesign
™
Pendant-mount
Series Loudspeakers
Loudspeakers
The all new line up of AcousticDesign
™
Series pendant-mount loudspeakers are high quality 70/100V, two-way, full-range systems ideal for a wide variety of foreground and background business music applications.
Designer Friendly:
•
Deliberately unobtrusive industrial design.
•
Available in white (RAL 9010) or black (RAL 9011).
•
Paintable enclosure and grill.
•
Complete EASE, CLF, CAD & BIM information.
Application Diverse:
•
Lightweight rugged ABS construction.
•
UV Inhibitors in all white models.
•
IP-54 rating for dust and splash resistance.
•
Powder-coated grills and weather-treated cones.
Install Ready:
•
SnapFit magnetic grills.
•
Low saturation 70/100V transformers.
•
16 ohm low impedance bypass.
•
2x quick link wire assemblies with gripple fastener supplied.
•
Screw-down Euro block connector with loop-through.
•
Sealable input weather cup – keeps moisture away from wiring.
Factory Optimized:
•
DMT (Directivity Matched Transition
™
): Ensures smooth, uniform frequency response over the rated coverage area.
•
Intrinsic Correction
™
: Factory voicings available for CXD Series amplifiers and Q-SYS Designer Software - delivers repeatable performance from project to project.
55
56 Loudspeakers
AcousticDesign
™
Pendant-mount
Series Loudspeakers
Loudspeakers
Effective frequency range 1
Power Capacity
System Sensitivity
Coverage Angle
Output 4 (Peak SPL @ 1M)
Driver Information
LF
HF
AD-P4T-BK
70 Hz – 20 kHz
30 W
87.5 dB
150° conical DMT
108 dB
AD-P4T-WH
70 Hz – 20 kHz
30 W
87.5 dB
150° conical DMT
108 dB
4.5” weather resistant paper cone woofer
0.75“ aluminum dome tweeter
4.5” weather resistant paper cone woofer
0.75“ aluminum dome tweeter
Rated Impedance
Input Connectors
Net Weight
16 ohm
6.5 lb / 2.9 kg
1 Free-field, -10 dB from on-axis sensitivity
16 ohm
4-pin Euro terminals 4-pin Euro terminals
6.5 lb / 2.9 kg
Effective frequency range 1
Power Capacity
System Sensitivity
Coverage Angle
AD-P6T-BK
65 Hz – 20 kHz
60 W
88 dB
140° conical DMT
Output
4
(Peak SPL @ 1M) 112 dB
Driver Information
LF
6.5” weather resistant paper cone woofer
HF
0.75“ aluminum dome tweeter
AD-P6T-WH
65 Hz – 20 kHz
60 W
88 dB
140° conical DMT
112 dB
6.5” weather resistant paper cone woofer
0.75“ aluminum dome tweeter
Rated Impedance
Input Connectors
Net Weight
16 ohm
9 lb / 4.1 kg
1 Free-field, -10 dB from on-axis sensitivity
16 ohm
4-pin Euro terminals 4-pin Euro terminals
9 lb / 4.1 kg
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
57
58 Loudspeakers
AcousticCoverage
™
Surface-mount
Series Loudspeakers
Loudspeakers
AC-S6T AC-S4T
AcousticCoverage ™ Series is designed to offer integrators a cost effective solution for applications where voice reinforced coverage is of primary concern, while providing improved musicality often not seen in typical BGM class products. Applications for AccousticCoverage speakers include wide area paging systems, background music, distance conferencing reinforcement, healthcare facilities, concourses, transportation terminals and more.
•
High quality transducers provide exceptional clarity through the critical voice range.
•
Ported baffle for increased low frequency extension.
•
Low saturation 70/100V transformers with 8 ohm bypass.
•
4-pole Euroblock connector eases system wiring.
•
Advanced voicing filter sets using QSC’s Intrinsic Correction
™
available through either the Q-SYS
™
Platform or CXD Series amplifiers.
•
Spring-loaded and rotatable logo on grill for installation convenience in either horizontal or vertical deployments.
•
Complete EASE, CAD & BIM information available.
AC-S4T-BK
AC-S4T-WH
Frequency Range (-10 dB) 70 Hz – 20 kHz
Power Capacity 1
Broad-Band Sensitivity 2
Coverage Angle
16 W
85 dB SPL
130° (500 Hz - 5 kHz)
Output 3 (Peak SPL @ 1M) 103 dB
Driver Information
Rated Impedance
4.5" polypropylene woofer with 1
" voice-coil
8 ohm
Input Connectors
Baffle Material
Net Weight
Euroblock connector with parallel output terminals
Painted ABS polymer
5.2 lbs / 2.4 kg
1 IEC60268-1 noise signal for 2 Hrs.
2 On-Axis, free-field sensitivity, 2.83V, 1 m
3 Calculated from rated noise voltage and sensitivity.
AC-S6T-BK
AC-S6T-WH
60 Hz – 20 kHz
30 W
86 dB SPL
130° (500 Hz - 5 kHz)
107 dB
6.5" polypropylene woofer with 1" voice-coil
8 ohm
Euroblock connector with parallel output terminals
Painted ABS polymer
8.3 lbs / 3.8 kg
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
59
60 Loudspeakers
AcousticDesign
™
Series Loudspeakers
NEW Column Surface-mount
The all new AcousticDesign™ Series column surface-mount loudspeakers are high quality 70/100V or 8 ohm bypass, full-range systems ideal for a wide variety of foreground and background applications with acoustically-challenged environments.
Designer Friendly:
•
Deliberately unobtrusive industrial design.
•
Available in white (RAL 9010) or black (RAL 9011).
•
Paintable enclosure and grill.
•
Complete EASE, CLF, CAD & BIM information.
Application Diverse:
•
Rugged aluminum construction.
•
UV Inhibitors in all white models.
•
IP-54 rating for dust and splash resistance.
•
Powder-coated grills and weather-treated cones.
Install Ready
•
Close to wall pan/tilt bracket included.
•
Low saturation 70/100V transformers.
•
8 ohm low impedance bypass.
•
Selectable broad/narrow beam contour (AD-S162T only).
•
Screw-down Euro block connector with loop-through.
•
Sealable input weather cup – keeps moisture away from wiring.
Loudspeakers 61
AD-S802T
Effective frequency range
1
200 Hz - 17K Hz
Power capacity
2
System Sensitivity
Coverage Angle
Horizontal (-6 dB)
Coverage Angle
Vertical (-6 dB)
AD-S162T
200 Hz - 17K Hz
120 W
89 dB
150 deg (800 Hz - 5K Hz)
240 W
90 dB WIDE
92 dB NARROW
150 deg (1.2K Hz - 6K Hz) WIDE
150 deg (2K Hz - 6K Hz) NARROW
15 deg (3.5K Hz - 17K Hz) 30 deg (900 Hz - 17K Hz) WIDE
15 deg (1.5K Hz - 17K Hz) NARROW
Output 4
(Peak SPL @ 1M)
116
Driver Information
Rated Impedance
Input Connectors
Enclosure
(x8) 2.5” weather resistant paper cone woofer
8 ohm
4-pin Euro terminal
Aluminum
120 dB wide
122 dB narrow
(x16) 2.5” weather resistant paper cone woofer
8 ohm
4-pin Euro terminal
Aluminum
Ingress protection
Net Weight
IP-54
TBD
IP-54
TBD
Check Footnote Accuracy.
1 Free-field, -10 dB from on-axis sensitivity
2 IEC60268-1 noise signal for 2 Hrs
3 On-Axis, free-field sensitivity, 2.83V, 1 m
4 Calculated from rated noise voltage and sensitivity
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
62 Loudspeakers
AcousticDesign
™
Series Loudspeakers
Indoor/Outdoor Surface-mount
Loudspeakers
The second generation of AcousticDesign
™
Series surface-mount loudspeakers are professional, 70/100V, two-way, full-range systems ideal for a wide variety of foreground, background, ancillary and sound reinforcement. Ease-of-installation was the driving principles behind these new surface loudspeakers, culminating in the patented X-Mount
™
wall bracket with best-in-class functionality and repeatable angles.
Designer Friendly:
•
Available in white (RAL 9010) or black (RAL 9011).
•
Paintable grill & enclosure.
•
Complete EASE, CLF, CAD & BIM information available now.
Application Diverse:
•
IP-54 for dust and splash resistance.
•
Lightweight rugged ABS construction with UV Inhibitors.
•
Powder coated aluminum grills, X-Mount and treated hardware.
•
Weather-treated cones.
Install Ready
•
Patented X-Mount provides rapid deployment with repeatable angles.
•
Low saturation 70/100V transformers (excluding S12/S112SW).
•
8 ohm low impedance bypass.
•
Euro block connector with loop-through.
•
Sealable input weather cup - keeps moisture away from wiring.
•
Optional yoke mount and M10 Kit-C for larger models (S8T/S10T/S12).
Input terminal cover
Patented X-Mount
™
mounting system
Factory Optimized:
•
DMT (Directivity Matched Transition
™
): Ensures smooth, uniform frequency response over the rated coverage area
•
Intrinsic Correction
™
: Factory voicings available of CXD series amplifiers and Q-SYS Designer Software - delivers repeatable performance from project to project
63
64 Loudspeakers
AcousticDesign
™
Series Loudspeakers
Indoor/Outdoor Surface-mount
Loudspeakers 65
AD-S4T-BK
AD-S4T-WH
Effective frequency range
1
70 kHz – 20 kHz
Power capacity
2
System sensitivity
3
50W
87 dB SPL
Coverage Angle (-6 dB) 120° conical DMT
Output 4 (Peak SPL @ 1M) 110 dB
Driver Information
LF 4.5" weather treated paper cone woofer
AD-S6T-BK
AD-S6T-WH
60 kHz – 20 kHz
150W
89 dB SPL
105° conical DMT
116 dB
6.5" weather treated paper cone woofer
HF
Rated Impedance
Input Connectors
Enclosure
Ingress protection
Net Weight
0.75" silk dome tweeter /
0.75" voice-coil
8 ohm
Euroblock connector with parallel output terminals
Painted ABS polymer
IP-54
6.5 lbs / 2.95 kg
1 Free-field, -10 dB from on-axis sensitivity
2 IEC60268-1 noise signal for 2 Hrs
3 On-Axis, free-field sensitivity, 2.83V, 1 m
4 Calculated from rated noise voltage and sensitivity
1" silk dome tweeter /
1" voice-coil
8 ohm
Painted ABS polymer
IP-54
13.6 lb / 6.2 kg
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
AD-S8T-BK
AD-S8T-WH
Effective frequency range
1
55 kHz – 20 kHz
Power capacity
2
System sensitivity
3
200W
90 dB SPL
Coverage Angle (-6 dB) 105° conical DMT
Output 4 (Peak SPL @ 1M) 121 dB
Driver Information
LF 8" weather treated paper cone woofer
AD-S10T-BK
AD-S10T-WH
50 Hz – 19 kHz
250W
92 dB SPL
90° conical DMT
122 dB
10" weather treated paper cone woofer, 2.5” / 64 mm voice-coil
HF
Rated Impedance
Input Connectors
Enclosure
Ingress protection
Net Weight
1" exit / 1.4" voice-coil compression driver
8 ohm
Euroblock connector with parallel output terminals
Painted ABS polymer
IP-54
24.1 lbs / 11 kg
1 Free-field, -10 dB from on-axis sensitivity
2 IEC60268-1 noise signal for 2 Hrs
3 On-Axis, free-field sensitivity, 2.83V, 1 m
4 Calculated from rated noise voltage and sensitivity
1" exit / 1.4" voice-coil compression driver
8 ohm
Painted ABS polymer
IP-54
31 lbs / 15 kg
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
66 Loudspeakers
AcousticDesign
™
Series Loudspeakers
Indoor/Outdoor Surface-mount
Loudspeakers
AD-S12-WH
AD-S12-BK
Effective frequency range
1
52 Hz – 20 kHz
AD-S112sw
Power capacity
Output 4
2
System sensitivity
3
Coverage Angle (-6 dB)
300W
95 dB SPL
75° conical DMT
(Peak SPL @ 1M) 126 dB
30 Hz - 135 Hz
300W
90 dB SPL
N/A
121 dB
Driver Information
LF
HF
Rated Impedance
Input Connectors
Enclosure
Ingress protection
12" weather treated paper cone woofer, 2.5" / 64mm voice-coil
12" weather treated paper cone woofer,
2.5" / 64mm voice coil
1" exit / 1.4" voice-coil compression driver
8 ohm
Painted ABS polymer
IP-54
Net Weight 35 lbs / 16 kg
1 Free-field, -10 dB from on-axis sensitivity
2 IEC60268-1 noise signal for 2 Hrs
3 On-Axis, free-field sensitivity, 2.83V, 1 m
4 Calculated from rated noise voltage and sensitivity
8 ohm
Euroblock connector with parallel output terminals
Painted ABS polymer
IP-54
29 lb / 13.2 kg
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
AD-S10T with patented X-Mount™ mounting system
67
68 Loudspeakers
AcousticDesign
™
Series Loudspeakers
Indoor/Outdoor Surface-mount
Loudspeakers 69
AD-S32T
Ideal for background and general purpose audio playback, the AD-S32T loudspeaker offers a full sound in a surprisingly small package. For outdoor applications, the plated screw input signal terminals can be sealed with the included weather cover.
•
Includes ball mount assembly and yoke mount.
•
Enclosure is molded from high impact polystyrene (HiPS).
•
Powder coated aluminum grill.
•
Available in black or white.
•
Sealable Input Weather Cup – keeps moisture away from wiring.
AD-S282H/AD-S282HT
For installations requiring additional low-frequency performance combined with higher acoustical output, the dual 8-inch AD-S282H / AD-S282HT is an ideal solution. The AD-S282H / AD-S282HT features contemporary styling and is perfect for a variety of environments and applications.
•
Low impedance (AD-S282H) and 70/100 volt with 8 ohm bypass (AD-S282HT) versions.
•
Enclosure is molded from high impact polystyrene (HiPS).
•
Powder coated aluminum grill.
•
Available in black or white.
•
Yoke bracket included.
Driver Information
LF
HF
Rated Impedance
Input Connectors
Enclosure
AD-S32T-BK
AD-S32T-WH
Frequency Range
(-10 dB)
65 Hz – 20 Hz
Power Capacity 30 W (100 hrs)
System Sensitivity 85 dB
100° conical Coverage Angle
Output
1
(Peak SPL @ 1M)
105 dB
3" weather resistant, poly-propylene cone woofer
0.75" neodymium tweeter
8 ohm
Screw terminals
AD-S282H-BK
AD-S282H-WH
60 Hz – 20 kHz
AD-S282H-BK
AD-S282H-WH
60 Hz – 20 kHz
450 W (8 hrs)
93 dB
450 W (8 hrs)
93 dB
90°H x 60°V rotatable 90°H x 60°V rotatable
126 dB 126 dB
Dual 8" high-power treated cone, 2" voice coil, neodymium magnet
1" high output compression driver
8 ohm
Barrier Strip
(switchable: passive/bi-amp)
Dual 8" high-power treated cone, 2"voice coil, neodymium magnet
1" high output compression driver
8 ohm
Barrier Strip
Injection molded, weather resistant high impact polystyrene
Net Weight 4 lb / 1.8 kg 27.7 lb / 12.6 kg 27.7 lb / 12.6 kg
1 2 hour rating using IEC60268 noise based on minimum impedance
2 Mid-band based on nominal impedance
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
70 Loudspeakers
AcousticDesign
™
Surface-mount
Series AD-S28Tw Subwoofer
Loudspeakers
Designed and acoustically matched for use with AcousticDesign
™
Series installation loudspeakers, the AD-S28Tw is a dual 8" surface mount subwoofer that complements any of the ceiling-mount or surface-mount
AD Series full-range models. Efficient band-pass design features one sealed chamber and a second, ported chamber that combine to produce extended low frequency reproduction.
•
Dual 8" weather resistant polypropylene woofers provide exceptional resistance in high humidity environments.
•
Bass extension down to 36Hz.
•
Built-in, passive 120 Hz low-pass filter.
•
70/100 volt multi-tap transformer with 8 ohm bypass.
•
Marine grade plywood enclosure.
•
Nickel plated screw terminals accept up to 12 AWG (2.053 mm
2
) wiring.
•
Rubber feet allow floor or shelf deployment.
•
Forged-shoulder eyebolts and steel yoke enable suspended installation (included).
AD-S28Tw
Frequency Range
1
(-10 dB) 36 Hz – 205 Hz
Power Capacity
System Sensitivity
Output
2
2π (half space)
4π (full space)
Driver Information
Nominal Impedance
250 W (2 hours IEC)
94 dB, 2.83 V, 1 m, half space (2π)
124 dB SPL / 118 dB SPL
118 dB SPL / 112 dB SPL
Dual 8" (200 mm) weather resistant, polypropylene cone woofers, rubber surround
8 ohm
Input Connectors
Enclosure
Environmental
4 position barrier strip; 2 in / 2 out
Marine-grade plywood
Exceeds Mil Spec 810 for humidity, salt spray and dust; IEC
60529 IP-X4 splash rating
43 lb / 19.5 kg Net Weight
1 All frequency ranges specified refer to measured free field response.
2 Calculated SPL at 1m, speaker operating at rated RMS power with pink noise within specified frequency range.
3 Maximum input power tested in accordance with IEC 268-5 recommendations, 50 Hz – 20 kHz band limiting, 6 dB signal crest factor.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
71
72 Loudspeakers
AcousticPerformance
™
Installation Point-and-Shoot
Series Loudspeakers
Loudspeakers
AcousticPerformance
™
is a line of professional loudspeakers ideally suited for a wide variety of foreground sound reinforcement applications requiring high sound pressure levels from an unobtrusive, stylish enclosure.
AcousticPerfromance
™
loudspeakers utilize DMT (Directivity Matched
Transition ™ ), a design approach that matches HF waveguide to the natural coverage angle of the woofer at the cross-over region. This innovation vastly improves the loudspeakers power response resulting in smooth and consistent coverage both on and off axis.
•
DMT (Directivity Matched Transition
™
): Ensures smooth, coherent power response across the listening plane.
•
M10 and yoke mount fittings: Offer flexible deployment options for a variety of applications.
•
Clean industrial design: Unadorned grills compliment most decors and settings.
•
16-guage powder coated steel grills.
•
Complete EASE, CAD, and BIM information available online.
AP-5102
Frequency Range (-10 dB) 60Hz – 18kHz
Power Capacity
System Sensitivity
450W / 54V continuous
94dB, 1W@1m
Coverage Angle 105˚ conical DMT
TM
Output 1 (Peak SPL @ 1M) 127 dB
Driver Information
LF
HF
10” driver with 3" VC;
450W / 54V (2 Hrs)
3" voice coil, compression driver;
72W / 24V (2 Hrs)
Rated Impedance 8 ohms
AP-5122
48Hz – 18kHz
550W / 60V continuous
95dB, 1W@1m
90˚ conical DMT
TM
128 dB
12” driver with 4" VC;
450W / 60V (2 Hrs)
3" voice coil, compression driver;
72W / 24V (2 Hrs)
8 ohms
Input Connectors
Enclosure
Net Weight
Barrier Strip, NL4 connector
15-ply Baltic birch plywood
48 lb / 21.7 kg
Barrier Strip, NL4 connector
15-ply Baltic birch plywood
65 lb / 29.5 kg
1 2 hour rating using IEC60268 noise based on minimum impedance
2 Mid-band based on nominal impedance
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
73
74 Loudspeakers
AcousticPerformance
™
Installation Point-and-Shoot
Series Loudspeakers
Loudspeakers
AP-5152
Frequency Range (-10 dB) 44Hz – 18kHz
Power Capacity
System Sensitivity
Coverage Angle
Output 1
@ 1M)
(Peak SPL
Driver Information
LF
625W / 65V continuous
96dB, 1W@1m
75˚ conical DMT
129 dB
15" driver with 4" VC; 525W /
65V (2 Hrs)
HF
Rated Impedance
Input Connectors
Enclosure
Net Weight
3" voice coil, compression driver;
72W / 24V (2 Hrs)
8 ohms
Barrier Strip, NL4 connector
15-ply Baltic birch plywood
80 lb / 36.2 kg
AP-5122m
55Hz – 18kHz
550W / 60V continuous
95dB, 1W@1m
90˚ conical DMT
128 dB
12" driver with 102 mm (4") VC;
450W / 60V (2 Hrs)
3" voice coil, compression driver;
72W / 24V (2 Hrs)
8 ohms
Barrier Strip, NL4 connector
15-ply Baltic birch plywood
63 lb / 28.3 kg
AP-4122m
Frequency Range (-10 dB) 50Hz – 18kHz
Power Capacity
System Sensitivity
Coverage Angle
Output
1
(Peak SPL
@ 1M)
Driver Information
LF
400W / 40V continuous
96dB, 1W@1m
90˚ conical DMT
TM
128 dB
12" driver with 2.5" VC
HF
Rated Impedance
Input Connectors
Enclosure
Net Weight
1” compression driver with 1.75” VC
4 ohms
Barrier Strip, NL4 connector
15-ply Baltic birch plywood
39.7 lb / 18.1 kg
AP-212sw
35Hz – 250kHz
600W / 49V continuous
93dB, 1W@1m
NA
127 dB
2 x 12” driver with weather treated cone woofer
4 ohms
Barrier Strip, NL4 connector
15-ply Baltic birch plywood
65.4 lb / 29.7 kg
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
75
76 Loudspeakers
ILA Series
Installation Line Array
Loudspeakers 77
WL2082-i with WL118-sw using EB2082-i extension bar and FB2082-i fly-bar.
Designed for installation applications while retaining the performance of high-end touring line array systems, the ILA System takes this concept and builds on it by offering a complete and accessible solution consisting of processing, amplification, line array, subwoofer and suspension accessories.
Built around the WL2082-i line array element, the system offers both flying
(WL118-sw) or ground-stacked (GP118-sw) subwoofer options.
WL2082-i
•
Dual 8" diameter low-frequency drivers.
•
Dual 1.75" voice coil diameter, neodymium compression drivers with titanium domes.
•
Patented* multiple aperture diffraction waveguide that provides extremely wide coverage (140º).
•
Available in black or white and constructed from high impact polystyrene.
•
May be used in outdoor applications where the system is not directly exposed to the elements.
Frequency Range (-10 dB)
Nominal Coverage
Peak Output
2
WL2082-i
68 Hz – 22 kHz
140° H
132 dB
Power Handling
1
HF
LF / MF / Bi-amp
Tri-amp
Driver Information
LF
HF
Input Connectors
Enclosure
Net Weight (each)
100 W
400 W
200 W + 200 W
2 x 8" transducers; 2" voice coil; neodymium magnet
2 x 1.75" titanium diaphragm, neodymium magnet
2 x NL8 in parallel
HiPS
37 lb / 16.8 kg
1 Continuous IEC specified test signal, 2 hours.
2 Calculated at 1 m using power capacity and system sensitivity.
6 dB peak-to-average signal ratio assumed.
*Patent No. 7,177,437
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
78 Loudspeakers
ILA Series
Installation Line Array
Loudspeakers
GP118-sw
GP118-sw Subwoofer
•
18" diameter low-frequency driver.
•
850W continuous power handling.
•
Performance down to 29Hz.
•
Integrated M10 suspension points.
•
M20 threaded pole mount.
•
Available in black or white and housed in a birch plywood enclosure.
WL118-sw Subwoofer
•
18” diameter low-frequency driver.
•
850W continuous power handling.
•
Performance down to 29Hz.
•
Flyable on top or behind an ILA array.
•
Available in black or white and housed in a Birch plywood enclosure.
GP118-sw
Frequency Range (-10 dB) 29 Hz – 800 Hz
WL118-sw
29 Hz – 800 Hz
Nominal Coverage
Peak Output 2
N/A
134.5 dB
N/A
134.5 dB
Power Handling
1
SUB
850 W 850 W
Driver Information
LF
HF
Input Connectors
Enclosure
18" transducer, 4" voice coil, ferrite magnet
N/A
2 x NL8 in parallel and 2 x NL4 in parallel
Premium Birch Plywood
Net Weight (each) 107 lb / 48.5 kg 111 lb / 50.4 kg
1 Continuous IEC specified test signal, 2 hours.
2 Calculated at 1 m using power capacity and system sensitivity.
6 dB peak-to-average signal ratio assumed.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
79
80 Loudspeakers
K.2 Series Powered Loudspeakers
Portable/Production & Installed Sound
K.2 Series loudspeakers feature an all new 2,000 watt, Class D power module and onboard DSP that deliver levels of sonic clarity and total output that exceeds expectations for systems of this size and weight. With three full-range models in the line (K8.2, K10.2 and K12.2) users can select a model based on desired coverage angle for the application.
•
Balanced Line Level Combo XLR /1/4” TRS Inputs.
•
User adjustable EQ, delay and crossover.
•
Default plus ten factory preset contours.
•
Intrinsic Correction™ ensures a flat sonic response.
•
Integrated M10 suspension points on full range models.
•
Cloth-backed grills provide a more refined look.
•
Optional K.2 LOC (Lock-Out Cover) prevents tampering after installation.
•
Optional Yoke Mounts support horizontal or vertical deployment.
•
Complete EASE and CAD library available online.
Loudspeakers 81
K8.2
Frequency Range (-10 dB) 55 Hz – 20 kHz
K10.2
50 Hz – 20 kHz
Nominal Coverage (-6 dB) 105° conical DMT
Output
1
(Peak SPL @ 1M) 128 dB
2000 W continuous Class D Amplifier Power
Current Consumption
1/8 Power 2
90° conical DMT
130 dB
2000 W continuous Class D
100 VAC, 2.1 A • 120 VAC, 1.9 A • 230 VAC, 1.1 A
Driver Information
LF
HF
Input Connectors
Enclosure
Net Weight
8" cone transducer
1.4" Titanium diaphragm compression driver
10" cone transducer
1.4" Titanium diaphragm compression driver
Balanced female XLR / 1/4” MIC/LINE level input • Balanced female XLR / 1/4” HI-Z/LINE level input • 1/8” TRS Mini-Jack
Impact-resistant ABS
27 lb / 12.2 kg
Impact-resistant ABS
32 lb / 14.5 kg
K12.2
Frequency Range (-10 dB) 45 Hz – 20 kHz
Nominal Coverage (-6 dB) 75° conical DMT
Output 1
@ 1M)
(Peak SPL
Amplifier Power
132 dB
2000 W continuous Class D
Current Consumption
1/8 Power 2
Driver Information
LF
HF
Input Connectors
100 VAC, 2.1 A • 120 VAC, 1.9 A • 230 VAC, 1.1 A
12" cone transducer
1.4" Titanium diaphragm compression driver
Balanced female XLR / 1/4" MIC/LINE level input • Balanced female XLR / 1/4" HI-Z/LINE level input • 1/8" TRS Mini-Jack
Enclosure
Net Weight
Impact-resistant ABS
39 lb / 17.7 kg
1 Measured on-axis at 1 m, using pink noise with a crest factor of 10 dB
2 1/8 th power is representative of current draw with typical music program material with occasional clipping.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
82 Loudspeakers
KS212C Cardioid Subwoofer
The KS212C Cardioid Subwoofer represents the world’s first-in-class single-box powered cardioid subwoofer solution for installation applications.
A breakthrough in innovation and design, the KS212C Cardioid Subwoofer uniquely provides all the benefits of cardioid deployment in a single, compact enclosure, “keeping bass in its place” for modestly-sized performance venues, the KS212C Cardioid Subwoofer is unparalleled in its ability to manage low frequencies on stage, or anywhere that excessive noise behind the stage would be undesirable.
Powered by a 3,600 watt Class D amplifier, processed with the latest DSP technology, and featuring dual 12-inch long excursion drivers each arranged in a 6th order bandpass chamber, these components all combine seamlessly to produce a staggering 15 dB more output at the front of the cabinet than at the rear. Highly portable, the cabinet features. Two M20 sockets which accepts a 35mm speaker pole in other horizontal or vertical orientation.
Shipping Fall-2017
(Additional specifications to be announced)
Rear
Front
Rear
-15 dB
Front
Typical
Subwoofer
Energy
Dispersion
Most subwoofers radiate energy around the entire enclosure, leading to undesirable
LF build-up on stage and wasted energy around the sides and rear of the system.
Cardioid
Subwoofer
Energy
Dispersion
With -15 dB less energy radiating from the rear than the front, the
KS212C Cardioid
Subwoofer is unparalleled in its ability to manage low frequencies on the stage, as well as outdoors or any application where undesirable low frequency energy needs to be minimized.
84 Loudspeakers
KW Series Active Loudspeakers
Portable/Production & Installed Sound
Built on the highly successful K Series platform, KW Series loudspeakers feature a 1,000 watt, Class D power module with onboard DSP housed in all birch wooden enclosures that deliver superior levels of sonic clarity and total output. With three full-range models in the line (KW122, KW152 and
KW153) plus a subwoofer (KW181), users can select a model based on desired coverage angle for optimum performance.
•
Combo XLR /1/4" TRS inputs.
•
Variable mic/line input gain.
•
Direct thru-puts and balanced summed output.
•
Integrated M10 suspension points on full range models.
•
DEEP™ provides extended low-frequency performance.
•
Intrinsic Correction
™
ensures a flat sonic response.
•
All birch plywood enclosures.
•
On-board mixing of up to three audio sources.
Loudspeakers 85
KW122
Frequency Range (-10 dB) 50 Hz – 20 kHz
KW152
43.7 Hz – 20 kHz
Nominal Coverage (-6 dB) 75° conical
Output
1
(Peak SPL @ 1M) 131 dB
1000 W continuous Class D Amplifier Power
Current Consumption
1/8 Power 2
60° conical
133 dB
1000 W continuous Class D
100 VAC, 2.3 A • 120 VAC, 2.01 A • 230 VAC, 1.13 A
Driver Information
LF
HF
Input Connectors
Enclosure
Net Weight
12" cone transducer
1.75" diaphragm compression driver
15" cone transducer
1.75" diaphragm compression driver
Balanced female XLR / 1/4" mic/line level input
Balanced female XLR / 1/4" line level input
Painted Birch Plywood
49 lb / 22.2 kg
Painted Birch Plywood
64 lb / 29 kg
KW153
Frequency Range (-10 dB) 33 Hz – 20 kHz
KW181
34 Hz – 143 Hz
Nominal Coverage (-6 dB) 75° conical
Output 1 (Peak SPL @ 1M) 131 dB
1000 W continuous Class D Amplifier Power
Current Consumption
1/8 Power
2
N/A
130 dB
1000 W continuous Class D
100 VAC, 2.3 A • 120 VAC, 2.01 A • 230 VAC, 1.13 A
Driver Information
LF
MF
HF
15" cone transducer
6.5" mid range cone transducer
1.75" diaphragm compression driver
18" cone transducer
N/A
N/A
Input Connectors
Enclosure
Net Weight
Balanced female XLR / 1/4" mic/line level input • Balanced female XLR / 1/4" line level input •
Painted Birch Plywood
41 lb / 18.6 kg
Dual balanced female XLR /
1/4" line level input
Painted Birch Plywood
74 lb / 33.6 kg
1 Calculated for 1 m, based on sensitivity (full-space for full range systems and half-space for
LF-only and subwoofer systems) and peak power capability of amplifier.
2 1/8 power is representative of current draw with typical music program material with occasional clipping.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
86 Loudspeakers
KLA Series Active Loudspeakers
Portable/Production & Installed Sound
The KLA Series brings the power and sophistication of a line array system into an easy-to-use product, significantly redefining the line array product category. With its simple “Lift, Click and Play” approach, KLA can be deployed in a fraction of the time required by comparable installation line array products. This fixed arcuate, active line array system is ideal for a wide range of permanently installed applications ranging from performance venues to houses of worship or other venues where a line array system is desired.
Loudspeakers 87
•
Available in Black or White.
•
1,000 Watt Class D power module.
•
Balanced XLR Input with loop thru.
•
90˚ x 18˚ coverage (each enclosure).
•
Integrated M10 suspension points.
•
Integrated, easy-to-use rigging hardware allows for quick deployment.
•
Ar-Q™ (Arcuate Equalization) enables quick tuning of an array with the click of a switch.
•
DEEP™ provides extended low-frequency performance.
•
Intrinsic Correction™ ensures a flat sonic response.
•
KLA12 features an ABS enclosure and KLA181 features a birch enclosure.
KLA12 KLA181
Frequency Range
(-10 dB)
Nominal Coverage
(-6 dB)
Output
1
(Peak SPL @ 1M)
Amplifier Power
Current Consumption
1/8 Power 2
Transducers
LF
HF
44 Hz – 20 kHz
90 x 18 degree
131 dB
500 W x 500 W continuous
33 Hz
N/A
135 dB
1000 W continuous Class D
100 VAC, 2.3 A • 120 VAC, 2.01 A • 230 VAC, 1.13 A
Input Connectors
Enclosure
Net Weight
12" cone transducer
1.75" diaphragm compression driver
Balanced female XLR line level input
Impact resistant ABS
55 lbs / 25.0 kg
18" cone transducer
N/A
Painted birch plywood
104 lbs / 47.2 kg
1 Calculated for 1 m, based on sensitivity (full-space for full range systems and half-space for
LF-only and subwoofer systems) and peak power capability of amplifier.
2 1/8 power is representative of current draw with typical music program material with occasional clipping.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
88 Loudspeakers
K Family Accessories
Available K.2 Series Accessories
•
K8.2 Yoke
•
K10.2 Yoke
•
K12.2 Yoke
•
K.2 LOC
•
M10 Kit-C
Available KW Series Accessories
•
M10 Kit-W
•
KW Suspension Kit 122
Available KLA Series Accessories
•
KLA AF12 Array Frame
•
M10 Kit-C
•
KLA181 M10 KIT
K.2 Yoke Mount
K.2 LOC
Loudspeakers
M10 Kit-C
AF12 Array Frame
89
KLA AF12 Array Frame
90 Mixers
DIGITAL MIXERS
Mixers 91
92 Mixers
TouchMix
™
Series
Compact Digital Mixers
The TouchMix ™ Series stands as the perfect complement to any installation that might have live performance needs, going Beyond Mixing
™
to deliver amazing results to users at all levels of experience. For live sound professionals, TouchMix has everything you would want and expect in an advanced, world- class mixing console — in a package small enough fit in constrained spaces. For more casual users TouchMix Presets, Wizards and
Simple Modes help you get a professional mix quickly and easily.
“Big Mixer” Features and Specifications
TouchMix Series “no asterisk” specifications include 4-band, fully parametric
EQ with variable hi- and lo-pass filters, as well as comprehensive dynamics processing on each input channel. Four mix busses feed four internal professional, digital effects processors (six busses and six processors on
TM-30). Comprehensive dynamics, graphic EQ, hi-pass, lo-pass and notch filters and delay are available on both the main and aux outputs and there are 8 DCA groups with mutes as well as 8 mute groups. The TouchMix-30
Pro additionally offers 8 Sub groups with their own extensive processing as well as a Patch Matrix for “multing” of inputs and a powerful copy-and-paste function. With 4/10/14 Aux output channels (TM-8/16/30), TouchMix also has ample stage monitor mixing capability and all models have the ability to drive wired stereo in-ear monitors directly.
Mixers 93
TouchMix
™
-8
TouchMix™-30 Pro TouchMix
™
-16
Fast, Professional Results
TouchMix features a comprehensive library of Channel Presets designed specifically for the unique requirements of live reinforcement for music and speech. Created utilizing all types of instruments, popular microphones and pickups as well as multiple types of speaker systems, these presets help the user achieve great results quickly. Effects and Gain Wizards further assist the user in achieving great results quickly. All models feature powerful and intuitive Anti-Feedback and Room Tuning Wizards as well as two real-time analyzers (RTA).
TouchMix’s
Professionally
Designed Preset
Library
Compact and Complete
The TouchMix Series models are completely self-contained and require no external PC or video display. The graphic, color touch-screen (multi-touch on
TM-30) provides access to all mix parameters along with a physical rotary encoder and hardware buttons for fast and precise touch-and-turn operation. The available Remote Control App for iOS and Android phones and tablets controls mixer parameters wirelessly. An included USB Wi-Fi adapter (TM-8/16) creates the network connection between the mixer and the hand-held device while wired or wireless connection to an external or infrastructure router is also supported. All mixers are capable of direct, multi-track recording to an external USB hard drive. Tracks may be mixed directly on the mixer or transferred to a DAW. The TM-30 also serves as a
32-channel interface for DAW software running on Mac® computers.
TM-8/16 also ship complete in their own padded carrying case for transport and protection and rack kits are available for all models.
94 Mixers
TouchMix
™
Series
Compact Digital Mixers
Display
Inputs
Total
Mic/Line
Line
USB MP3 Playback
Talkback
Outputs
Total Mix Outputs
Main L/R
Aux
In Ear Monitor (Stereo)
Cue (Stereo)
Monitor (Stereo)
Input Channel Processing
Equalization
Dynamics
Delay
Output Channel Processing
1/3 Octave GEQ
Parametric EQ
Notch Filters
Other
Sub Group Processing
Recording / Playback
USB MTR Direct to Hard Drive
DAW Computer Interface
Stereo MP3
Groups
Cue
Effects
TouchMix-30 Pro
10" (254 mm), 1024 x 600 pixel, color TFT, capacitive multi-touch sensing
32
24 (20 XLR, 4 XLR combo)
6 (1/4" TRS + top panel 1/8" (3.5 mm) TRS)
Stereo
1 (XLR with 48 V)
16
2 (XLR)
14 (XLR)
2 (1/4" TRS from Auxes 11/12 and 13/14)
1 (1/4" TRS)
2 (XLR)
4-band Parametric EQ with Hi/Low Shelving Option,
Variable 24 dB/octave HPF and LPF
Gate and Compressor
100 msec.
Main L/R, Aux 1-14
Main L/R, Aux 1-14
12 bands, all outputs
100 msec Delay/Limiter/HPF/LPF, all outputs
6-band PEQ, HPF, LPF, Limiter
Real Time Analyzer
Preset Memory
External Control
32 x 32
32 x 32 (Core Audio, Mac OS only)
Playback from USB
8 DCA, 8 Mute, 8 Subgroups
Selectable. AFL, PFL, Solo in Place
6 Effects Engines (Reverb, Echo, Delay,
Chorus, Pitch Shift), 1 Pitch Correct
2 x 1/3 octave
99 User Scenes/Presets, 120 Factory Presets
TouchMix Control app for iPad/Android controls all mixer functions via Wi-Fi
USB Wi-Fi router or Wi-Fi dongle (not included)
Wi-Fi
Mixer Dimensions (HWD)
Weight
Power Requirements
Sampling Frequency
THD
7.5" x 16.9" x 18.1" (19 cm x 42.9 cm x 46 cm)
17.5 lb (7.9 kg)
100-240 VAC, 50-60 Hz
Selectable 44.1 kHz or 48 kHz
<0.005%, +4 dBu; 20 Hz-20 kHz, unity gain, any input to any output
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
Mixers 95
TouchMix-16
6.1" × 3.5" (156 mm × 90 mm), color TFT, touch sensing
TouchMix-8
6.1" × 3.5" (156 mm × 90 mm) color TFT, touch sensing
22
16 (12 XLR, 4 XLR combo)
2 Stereo (1/4" TRS)
Stereo
1 (XLR)
12
2 (XLR)
6 (XLR), 2 (Stereo, 1/4" TRS)
2 (1/4" TRS from Auxes 7/8 and 9/10)
1 (1/4" TRS)
1 (1/4" TRS)
14
8 (4 XLR, 4 XLR combo)
2 Stereo (1/4" TRS)
Stereo
N/A
6
2 (XLR)
4 (XLR)
1 (1/4" TRS from Auxes 3/4)
1 (1/4" TRS)
N/A
4-band Parametric EQ with Hi/Low Shelving
Option, Variable 24 dB/octave HPF and LPF
Gate and Compressor
100 msec.
4-band Parametric EQ with Hi/Low Shelving Option,
Variable 24 dB/octave HPF and LPF
Gate and Compressor
100 msec.
Main L/R, Aux 1-6
Auxes 7/8 and 9/10
6 bands, all outputs
100 msec Delay/Limiter/HPF/LPF, all outputs
N/A
Main L/R, Aux 1-4
N/A
6 bands, all outputs
100 msec Delay/Limiter/HPF/LPF, all outputv
N/A
22 x 22
N/A
Playback from USB
8 DCA, 8 Mute
Selectable. AFL, PFL
4 Effects Engines (Reverb, Echo, Delay,
Chorus, Pitch Shift), 1 Pitch Correct
1 x 1/3 octave
99 User Scenes/Presets, 120 Factory Presets
TouchMix Control app for iPad/Android controls all mixer functions via Wi-Fi
14 x 14
N/A
Playback from USB
8 DCA, 8 Mute
Selectable. AFL, PFL
4 Effects Engines (Reverb, Echo, Delay,
Chorus, Pitch Shift), 1 Pitch Correct
1 x 1/3 octave
99 User Scenes/Presets, 120 Factory Presets
TouchMix Control app for iPad/Android controls all mixer functions via Wi-Fi
Wi-Fi router (with USB-to-Ethernet adapter) or included Wi-Fi dongle
Wi-Fi router (with USB-to-Ethernet adapter) or included Wi-Fi dongle
2.3" x 14.2" x 11.5" (5.8 cm x 36.0 cm x 29.1 cm) 2.2" x 13.1" x 9.6" (5.6 cm x 33.3 cm x 24.5 cm)
5.9 lb (2.98 kg) 4.3 lb (1.95 kg)
100-240 VAC, 50-60 Hz
Selectable 44.1 kHz or 48 kHz
<0.005%, +4 dBu; 20 Hz-20 kHz, unity gain, any input to any output
100-240 VAC, 50-60 Hz
Selectable 44.1 kHz or 48 kHz
<0.005%, +4 dBu; 20 Hz-20 kHz, unity gain, any input to any output
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
96 Amplifiers
qsc.com/systems
5-19-2017 ©2017 QSC, LLC, all rights reserved. QSC, the
QSC logo, PowerLight, Q-SYS, are registered trademarks of
QSC, LLC, in the US and other countries. FAST, X-Mount,
DMT, AcousticDesign, and Intrinsic Correction, are trademarks of QSC,
LLC. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or other countries.
CobraNet is a trademark of Cirrus Logic. Skype for Business™ is a trade mark of Skype is not affiliated, sponsored, authorised or otherwise associated by/with the Skype group of companies. GotoMeeting™ are either registered trademarks or trademarks of Citrix Systems, Inc. in the United States and/or other countries. Dante is a trademarks of Audinate Pty Ltd. PowerCON and Speakon are trademarks of Neutrik. All trademarks are the property of their respective owners. Multiple aperture diffraction slot waveguide US Patent number 7177437. Other patents may apply or be pending.
Advertisement
Key Features
- Software-based audio, video, and control
- Flexible, scalable architecture
- IT-friendly design
- High-performance audio processing
- Extensive control and monitoring
- Wide range of I/O options
- Integration with third-party devices
