ARC & TIG Dynasty 280DX Part No: MR907514002 NEW PRODUCT AVAILABLE SEPTEMBER 2014 UPGRADABLE & EXPANDABLE WIND TUNNEL TECHNOLOGY™ Front panel memory card data port provides the ability to easily upgrade software and expand product features. Protects internal electrical components from airborne contaminates, extending the product life. PRO-SET Allows digital meters to be calibrated for certification. Eliminates the guesswork when setting weld parameters. Use Pro-Set when you want the speed, convenience and confidence of preset controls. Simply select the feature and adjust until Pro-Set appears on the display. SLEEP TIMER Conserves electricity. This programmable feature will power down the machine if it sits idle for a specific time. BLUE LIGHTNING™ High-frequency (HF) arc starter for non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. WELDING MODE AC TIG FEATURES METER CALIBRATION COOL POWER SUPPLY Integrated 120-volt dedicated-use receptacle to power the Coolmate™ 1.3. The power switch on the Maxstar also activates the receptacle to help prevent torch failure. Balance control provides adjustable oxide removal which is essential for creating the highest quality aluminum welds. DX models provide extended ranges. Frequency controls the width of the arc cone and can improve directional control of the arc. APPLICATIONS Precision Fabrication Heavy Fabrication Pipe and Tube Fabrication Aerospace Aluminum Ship Repair Anodized Aluminum Fabrication AC/DC STICK FEATURES PROCESSES AC/DC TIG (GTAW) Pulsed TIG (GTAW-P) Stick (SMAW) Power source cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled though the machine. Hot Start™ adaptive control provides positive arc starts without sticking. AC frequency control adds stability for smoother welds when AC Stick welding. Stick-Stuck detects if the electrode is stuck to the part and turns the welding output off to safely and easily remove the electrode. Menu selectable. DC TIG FEATURES 3 YEAR WARRANTY FAN-ON-DEMAND™ Exceptionally smooth and precise arc for welding exotic materials. RATED OUTPUT For details, refer to Miller’s True Blue warranty statement. AMPS INPUT AT RATED OUTPUT, 50/60 HZ DIMENSIONS (MM) 230 V 1 PHASE 400 V 3 PHASE KVA TIG (GTAW) 235 A at 19.4 V, 60% Duty Cycle 30 A 10 A 12.5 Stick (SMAW) 235 A at 19.4 V, 60% Duty Cycle 31 A 11 A 12.5 welding.com.au 1300 300 884 H: 346 W: 219 D: 269 WEIGHT 25kg
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021