Instructions How to Use Touch Screen and LC

How to Use AMX Touch Screen
In RL 0017
Using Computer Images
1) Locate the AMX touch screen panel, which is located on the side of the podium or
desk.
2) To power on the LC Data- projector, use the
buttons on the Left side of the AMX control,
on top of the podium.
3) You need turn on the power to the
computer, if it is not on
4) You will see icons with: Computer,
Laptop, TV, VCR, DVD, Document
Camera, Aux Video, Manual Controls, and
Done. Press the Computer icon.
5) The computer image should now appear on
the screen.
Switching Between Devices (Document Cam, VCR, DVD, or Computer)
1) To switch to another device, select device on left side of AMX control
2) Select SENT TO PROJECTOR to activate new device on projector.
3) Repeat to change device again.
Using the Document Camera
1)
2)
3)
4)
5)
Press the text box that says: Document Camera
You will see icons that allow you to control the document Camera.
Move the document camera, located on the right side of podium.
Turn power on to the document camera if it is not on.
The image should now appear on the large screen.
1)
2)
3)
4)
Playing DVD’s
Press the text box that says: DVD
You will see icons that allow you to control the DVD
The image should now appear on the large screen.
To show a specific screen on a DVD: Use the control on the right side. Choose
and push arrow in the direction you want the DVD to progress. (reverse or fastforward)
5) Sound/speaker volume; choose the Source Volume box at the top of the touch
screen panel. Push the arrow pointing up to increase volume; the arrow pointing
down will make the DVD sound softer. The same adjustment can be made to Mic
volume using the Mic Source box.
Playing VHS Tapes
1)
2)
3)
4)
Press the text box that says: VCR
You will see icons that allow you to control the VCR (see above)
The image should now appear on the large screen.
To show a specific screen on a VCR: Use the control on the right side. Choose
and push arrow in the direction you want the DVD to progress. (reverse or fastforward)
5) Sound/speaker volume; choose the Source Volume box at the top of the touch
screen panel. Push the arrow pointing up to increase volume; the arrow pointing
down will make the DVD sound softer. The same adjustment can be made to Mic
volume using the Mic Source box.
4) To show a specific screen on a VHS tape: Use the control on the right side,
Choose and push arrow in the direction you want the DVD to progress. (reverse
or fast-forward)
5) Sound/speaker volume; choose the box at the bottom of the touch screen panel.
Push the arrow pointing up to increase volume; the arrow pointing down will
make the DVD sound softer.
Microphone Volumes -- using the Lavaliere & Hand-Held Microphones
To turn the volume up on the microphone, press the text box that says: microphone
volume on the Video Audio Sources Screen on the touch panel. All microphones are
kept in the media room, behind the chalkboard, door on the right side. If the door is
locked, please call extension 1838 for assistance. (464-1838)
To Turn System off
1) To turn the system off press the DONE button on the AMX Panel.
2) The projectors lamp will shut down and go into cool down mode. After cooling
down it will return to its
ceiling
storage area.
Manual controls
1) Manual controls are accessible by selecting, Manual Controls on the AMX
control panel.
2) These controls are use to diagnose problems with the AMX and lift system
and should not be used to turn off the system.
3) If you should find that the Lamp Status displays anything other than
NORMAL, you should contact ITS Staff at Ex 1838.
4) If you are having problems with the system you should contact ITS Staff at
EX 1838. See help below
If you have any questions or concerns, please call Instructional Technology Services
at: 464-1838