eVic Firmware Version 1.0 Directly on the status screen current puff number battery power symbol remaining puff number battery remaining current output voltage increase output voltage decrease output voltage high temperature warning Using the menu also adjustable or at Legend Menu screen function Power on Power off Click 5 times to start Turn off the device Sleep Lock the device Power set: Battery Output Exit Power set: Select battery capacity: 2200 or 2600 mAh Set output power: default wattage is 5.2 Exit the submenu Legend Menu screen Standby Screen System Exit Calendar Show time Set time Set date Set year Exit Puff info Set Puff Reset Puff Total Puff Exit Device Atomizer Ω Temp ℃ User info series No Version Exit Exit ▼ function Standby Select your screen time out: 15S, 30S, 1Min, 2Min Select your system time out: 3Min, 5Min,10Min,30Min,60Min Exit Calendar Show the current time Set time Set date Set year Exit the submenu Puff info Set amount of allowable draws Reset the amount of draws Show the total amount of draws Exit the submenu Device Show atomizer resistance Show the temperature of the device Show your personal information by MVR software Show serial number of the device Show software information Exit the submenu Exit the main menu ▲ menu choose down up How to upgrade 1. Download eVic firmware file 'code.bin' from www.joyetech.com. 2. Put this file into HEX folder under the root directory of MVR software. 3. Connect your eVic to computer, open MVR and click button 'Upgrade My ecig'. Wait until the program finishes the installation. Notice: 1. Please do not disconnect evic during the installation, or it may cause the program unstable. 2. Please do not change the name of upgrade file, or MVR will be not able to recognize it.