Samsung LE32D403E2W User manual

❑ ❑ Using❑the❑INFO❑button❑(Now❑&❑Next❑guide)

The display identifies the current channel and the status of certain audio-video settings.

The Now & Next guide shows daily TV programme information for each channel according to the broadcasting time.

●

Scroll ◄, ► to view information for a desired programme while watching the current channel.

● Scroll ▲, ▼ to view information for other channels. If you want to move to the currently selected channel, press the ENTERE button.

▶

All

● The displayed image may differ depending on the model.

Information

English

❑ ❑ Using❑Channel❑menu❑

O ❑ MENUm❑→❑ Support ❑ → Contents❑Home ❑ → ENTERE

Press the CONTENT button to select Watch❑TV , then select the desired menu.

Each screen will be displayed.

◀

■ ❑ Guide

The EPG (Electronic Programme

Guide) information is provided by broadcasters. Using programme schedules provided by broadcasters, you can specify programmes you want to watch in advance so that the channel automatically changes to the selected programme channel at the specified time. Programme entries may appear blank or out of date depending on a channel status.

Watch TV

My❑Downloads

Guide

Schedule❑Manager

Channel❑List

Channel❑Manager

Source

● The displayed image may differ depending on the model.

▶ ◀

English English

English

▶ ◀

Using❑Guide

Guide 19:10❑Tue❑1❑Jun

DTV Air 3 five

Home and Away

19:00 - 19:30

Drama

Dani is devastated when scott makes clear his views on marriage...

3 five

Channel❑View❑-❑All

Today

1❑❑❑❑❑❑❑❑❑❑Discovery

2❑❑❑❑❑❑❑❑❑❑DiscoveryH&L

3❑❑❑❑❑❑❑❑❑❑five

4❑❑❑❑❑❑❑❑❑❑price-drop.tv

5❑❑❑❑❑❑❑❑❑❑QVC

▼ 6❑❑❑❑❑❑❑❑❑❑R4DTT

C A

Sche.Mgr

A B

19:00

American❑Chopper

Tsunami❑Pri...

Home and...

No❑Information

No❑Information

No❑Information

19:30 20:00

Tine❑Team

The❑Curious...

Dark❑Angel

❑No❑Information

C

20:30

Fiv...

D

Ch.❑Mode ; Information k Page E Schedule

1 2 3 4

● The displayed image may differ depending on the model.

5 6 7

English

▶

C A

◀

1 C A

Red ( Sche.Mgr

): Moves to the reserved programmes in Sche.Mgr

.

C 2 A B

Green ( -24❑Hours ): Viewing the list of programmes to be broadcasted before 24 hours.

3

B 4

C

Yellow ( +24❑Hours ): Viewing the list of programmes to be broadcasted after 24 hours.

D

Blue ( Ch.❑Mode ): Select the type of channels you want to display on the Channel❑

List window. ( All,❑TV,❑Radio,❑Data/Other,❑Favourites❑1 5 )

5 j ( Information ): Displays details of the selected programme.

6 k ( Page ): Move to previous or next page.

7 E ( Watch❑/❑Schedule )

●

When selecting the current programme, you can watch the selected programme.

● When selecting the future programme, you can reserve to watch the selected programme. To cancel the schedule, press the ENTERE button again and select Cancel❑Schedules .

▶ ◀

English English

English

▶ ◀

■ ❑ Schedule❑Manager

Cancel or set the Timer❑Viewing to display the channel you want at the intended time.

Using❑Timer❑Viewing

You can set a desired channel to be displayed automatically at the intended time.

Set the current time first to use this function.

1. Press the ENTERE button to add programme to schedule manually.

2. Press the ◄/►/▲/▼ button to set the Antenna , Channel , Repeat , Date ,

Start❑Time .

● Antenna : Select the desired broadcasting signal.

● Channel : Select the desired channel.

▶

English

◀

● Repeat : Select Once , Manual , Sat~Sun , ❑Mon~Fri or Everyday to set at your convenience. If you select Manual , you can set the day you want.

N The (c) mark indicates the day you’ve selected.

● Date : You can set the desired date.

N It is available when you select Once in Repeat .

● Start❑Time : You can set the start time you want.

N If you want to edit or cancel the schedule, select the reserved schedule on the Schedule❑List , and select the Edit or Cancel❑Schedules .

▶ ◀

English English

English

▶ ◀

■ ❑ Channel❑List

You can view channel information, All ,

TV , Radio , Data/Other , ❑Analogue❑ or

Favourites❑1 5 .

Channel❑List

All

1

3

TV#1

2 The❑Spo...

BBC❑ONE❑glogal❑News

Pardon...

N When you press the CH❑LIST button on the remote control,

Channel❑List screen will be displayed at once.

● All : Shows all currently available channels.

● TV : Shows all currently available TV channels.

4

6

7

8

9

Air

Real❑Sp...

The❑Daily

Pros❑vs.

Today

Pardon...

C A B C D B D

● The displayed image may differ depending on the model.

● Radio : Shows all currently radio channels.

● Data/Other : Shows all currently available MHP or other channels.

● Analogue : Shows all currently available analogue channels.

● Favourites❑1 5 : Shows all favourite channels.

▶

English

◀

N Favourites❑1 5 will be displayed when you set Add❑to❑Favourites .

N If you want to view favourite channels you added, press the CH❑LIST button and use L ( Ch.Mode

) button to move Favourites❑1 5 .

N Using the remote control buttons with the Channel❑List .

●

C A Red ( Antenna ): Switches to Air❑ or Cable .

●

C A Programme❑View❑/❑Channel❑View ): Displays the programme when digital channel is selected. Returns to the channel view.

●

L ( Ch.Mode❑/❑Channel ): Move to the All , ❑TV , ❑Radio , ❑Data/Other , ❑

Analogue , Favourites❑1 5 .

❑ / Change channels.

N When you press the

C

(

A other channels using L ( Channel ) button.

) button, you can move to

▶ ◀

English English

English

▶ ◀

● ● E ( Watch❑/❑Information ): Watches the channel you select. / Displays details of the selected programme.

● k●( Page ): Move to next or previous page.

Channel❑Status❑Display❑Icons

Icon a

)

\

An analogue channel.

A reserved programme.

A locked channel.

Operations

▶

English

How❑to❑use❑Timer❑Viewing❑in❑Channel❑List❑(digital❑channels❑only)❑

When you set the Timer❑Viewing in Channel❑List , you can only set the programme in

Programme❑View .

◀

1. Press the CH❑LIST button, then select a desired digital channel.

2. Press the

C

(

A

) button.

3. Press the ▲ / ▼ buttons to select the desired programme, then press the

ENTERE( Information ) or INFO button.

4. Select Timer❑Viewing , then press the ENTERE button when done.

N If you want to cancel Timer❑Viewing , follow steps 1 through 3. Select Cancel❑

Schedules .

▶ ◀

English English

English

▶ ◀

■ ❑ Channel❑Manager

You can edit the channel to your preference.

● ( ) Channels : Shows the channel list according to the channel type.

● ( ) Favourites❑1 5 : Shows favourite channels.

Channel❑Manager

All

C

Selected❑item:❑4❑

1/2❑page

Channel❑number

N Using the colour buttons with the

Channel❑Manager .

●

C A Red ( Antenna ): Switches to

Air or Cable .

A B

●

Air ❑ C A ❑Antenna❑ D C A B D ❑Sorting❑❑❑k Page❑❑❑E❑Select❑❑❑T❑Tools❑❑❑R❑Return

● The displayed image may differ depending on the model.

D Blue ( Sorting ): Changes the list ordered by channel number or channel name.

▶

English

◀

Channel❑Status❑Display❑Icons

Icon a c

F

\

T

Operations

An analogue channel.

A channel selected.

A channel set as a favourite.

A locked channel.

Displays the Channel❑Manager option menu.

▶ ◀

English English

English

▶ ◀

Channel❑Manager❑Option❑Menu❑ t

Set each channel using the Channel❑Manager menu options ( Watch , Add❑to❑

Favourites/Edit❑Favourites,❑Lock/Unlock,❑Edit❑Channel❑Name,❑Edit❑Channel❑

Number,❑Delete,❑Select❑All/Deselect❑All ).

Option menu items may differ depending on the channel status.

1. Select a channel and press the TOOLS button.

2. Select a function and change its settings.

▶

English

◀

● Watch : Watch the selected channel.

● Add❑to❑Favourites❑/❑Edit❑Favourites : Set channels you watch frequently as favourites. / Add or Delete the selected channel in Favourites❑1 5 .

1. Select the Add❑to❑Favourites/Edit❑Favourites , then press the ENTERE button.

N If the channel is already added to favourite channel, Edit❑Favourites will be shown.

2. Press the ENTERE button to select Favourites❑1 5 , then press the OK button.

N One favourite channel can be added in several of Favourites among

Favourites❑1 5 .

▶ ◀

English English

English

● Lock/Unlock : Lock a channel so that the channel cannot be selected and viewed.

▶ ◀

N NOTE

● This function is available only when the Channel❑Lock is set to On .

● The PIN input screen appears. Enter your 4-digit PIN. Change the PIN using the Change❑PIN option.

● Edit❑Channel❑Name (analogue channels only): Assign your own channel name.

● Edit❑Channel❑Number : Edit the number by pressing the number buttons desired.

N Some area may not be able to support Edit❑Channel❑Name and Edit❑

Channel❑Number function.

▶

English

◀

● Delete : You can delete a channel to display the channels you want.

● Deselect❑All : Deselect all the selected channels.

N You can only select Deselect❑All when one or more channels are selected.

● Select❑All : Select all the channels in the channel list.

▶ ◀

English English

English

▶ ◀

❑ ❑ Retuning❑Channels

O ❑ MENUm❑→❑ Channel ❑ →❑ENTERE

■ ❑ Antenna❑(Air❑/❑Cable)❑ t

Before your television can begin memorising the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or Cable system).

▶

English

◀

■ ❑ Country

(depending on the country)

The PIN input screen appears. Enter your 4 digit PIN number.

● Digital❑Channel : Change the country for digital channels.

● Analogue❑Channel : Change the country for analogue channels.

▶ ◀

English English

English

▶ ◀

■ ❑ Auto❑Tuning

(depending on the country)

Scans for a channel automatically and stores in the TV.

N Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a channel is locked, the PIN input window appears.

● Auto❑Tuning

Air❑/❑Cable : ❑ Select the antenna source to memorise.

Digital❑&❑Analogue❑/❑Digital❑/❑Analogue : Select the channel source to memorise.

▶

English

◀

When❑Antenna❑Source❑is❑set❑to❑Air❑or❑Cable:

When selecting Cable❑ → ❑Digital❑&❑Analogue❑ or ❑Digital : Provide a value to scan for cable channels.

– Search❑Mode ( Full❑/❑Network❑/❑Quick ): Scans for all channels with active broadcast stations and stores them in the TV.

N If you select Quick , you can set up the Network,❑Network❑ID,❑

Frequency,❑Modulation and Symbol❑Rate manually by pressing the button on the remote control.

– Network ( Auto❑/❑Manual ): Selects the Network❑ID setting mode among

Auto or Manual .

– Network❑ID : When Network is Manual , you can set up Network❑ID using the numeric buttons.

▶ ◀

English English

English

▶ ◀

– Frequency : Displays the frequency for the channel. (differs in each country)

– Modulation : Displays available modulation values.

– Symbol❑Rate : Displays available symbol rates.

● Cable❑Search❑Option

(depending on the country & cable channels only)

Sets additional search options such as the frequency and symbol rate for a cable network search.

Start❑frequency❑/❑Stop❑frequency : Set the start or stop frequency (differs in each country).

Symbol❑Rate : Displays available symbol rates.

Modulation : Displays available modulation values.

▶

English

◀

■ ❑ Manual❑Tuning

Scans for a channel manually and stores in the TV.

N If a channel is locked, the PIN input window appears.

N According to the channel source, Manual❑Tuning may be supported.

When❑Antenna❑Source❑is❑set❑to❑Air❑or❑Cable:

● Digital❑Channel❑Tuning : Scans for a digital channel manually and stores in the TV. Press the

A

( New ) button to search the digital channels. When scanning has finished, a channel is updated in the channel list.

– When selecting Antenna → Air : ❑Channel,❑Frequency,❑Bandwidth

– When selecting Antenna → Cable : ❑Frequency,❑Modulation,❑Symbol❑

Rate

▶ ◀

English English

English

▶ ◀

● Analogue❑Channel❑Tuning❑ : Scans for an analogue channel. Press the

A

( New ) button to search the digital channels by adjusting the Programme,❑

Colour❑System,❑Sound❑System,❑Channel,❑Search .

B

N Channel mode

– P (programme mode): When tuning is complete, the broadcasting stations in your area have been assigned to the position numbers from P0 to P99. You can select a channel by entering the position number in this mode.

– C (aerial channel mode) / S (cable channel mode): These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel.

▶

D

English

◀

■ ❑ Edit❑Channel❑Number❑(Disable❑/❑Enable)

(depending on the country)

Use this to change channel number. When channel number is changed, channel information is not updated automatically.

▶ ◀

English English

English

▶ ◀

■ ❑ Fine❑Tune❑

(analogue channels only)

If the signal is weak or distorted, fine tune the channel manually.

N Fine tuned channels are marked with an asterisk “*”.

N To reset the fine-tuning, select Reset .

▶

English

◀

■ ❑ Transfer❑Channel❑List

(depending on the country)

Imports or exports the channel map. You should connect a USB storage to use this function.

N The PIN number input screen appears. Enter your 4 digit PIN number.

● Import❑from❑USB : Import channel list from USB.

● Export❑to❑USB : Export channel list to USB.

▶ ◀

English English

English

❑ ❑ Changing❑the❑Preset❑Picture❑Mode

O ❑ MENUm❑→❑ Picture ❑ →❑ Picture❑Mode ❑ →❑ENTERE

▶ ◀

■ ❑ Picture❑Mode❑ t

Select your preferred picture type.

N When connecting a PC, you can only make changes to the Entertain and

Standard .

● Dynamic : Suitable for a bright room.

● Standard : Suitable for a normal environment.

● Natural❑ for LED 5 series 40 inches and LCD 5 series : Suitable for reducing eye strain.

● Movie : Suitable for watching movies in a dark room.

● Entertain : Suitable for watching movies and games.

N It is only available when connecting a PC.

▶

English

❑ ❑ Adjusting❑Picture❑Settings

◀

■ ❑ Samsung❑MagicAngle❑

for LED 4 series 19-22 inches, 5 series 22 inches

O ❑ MENUm❑→❑ Picture ❑ →❑ Samsung❑MagicAngle ❑ →❑ENTERE

Adjust screen viewing Angle to optimize screen quality according to your viewing position.

● Samsung❑MagicAngle : When viewing the screen at an angle from below or above by setting the appropriate mode for each position you can obtain a similar picture quality as viewing the screen directly from the front.

Off : Select when viewing from the front position.

Lean❑Back❑Mode : Select when viewing from a slightly lower position.

Standing❑Mode : Select when viewing from the upper position.

● Mode : Adjust screen viewing angle.

N When Samsung MagicAngle is set to Lean❑Back❑Mode or Standing❑Mode ,

Gamma is not available.

▶ ◀

English English

English

▶ ◀

■ ❑

Backlight❑

for LED and LCD TV

❑/❑

Cell❑Light❑

for PDP TV

Brightness❑/❑Sharpness❑/❑Colour❑/❑Tint❑(G/R)

❑

❑

/❑

Contrast❑/❑

Your television has several setting options for picture quality control.

N NOTE

● In analogue TV , Ext.

modes of the PAL system, the Tint❑(G/R) function is not available.

● When connecting a PC, you can only make changes to

Backlight❑ for LED and LCD TV ❑/❑Cell❑Light❑ for PDP TV , ❑Contrast ,

Brightness❑ and ❑Sharpness .

● Settings can be adjusted and stored for each external device connected to the TV.

● Lowering picture brightness reduces power consumption.

▶

English

◀

■ ❑ Screen❑Adjustment

Set the various picture options such as picture size and aspect ratio.

● Picture❑Size : Your cable box/satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time.

Auto❑Wide : Automatically adjusts the picture size to the 16:9 aspect ratio.

16:9 : Sets the picture to 16:9 wide mode.

Wide❑Zoom : Magnifies the picture size more than 4:3.

N Adjusts the Position by using ▲, ▼ buttons.

Zoom : Magnifies the 16:9 wide pictures vertically to fit the screen size.

▶ ◀

N Adjusts the Zoom or Position by using ▲, ▼ button.

English English

English

▶ ◀

4:3 : Sets the picture to basic (4:3) mode.

N Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and centre of the screen may cause image retention

(screen burn) which are not covered by the warranty.

Screen❑Fit : Displays the full image without any cut-off when HDMI (720p /

1080i / 1080p) signals are inputted.

Smart❑View1❑ for LED 5 series 40 inches and LCD 5 series : Reduces original screen by 50%.

Smart❑View2❑ for LED 5 series 40 inches and LCD 5 series : Reduces original screen by 25%.

N NOTE

● Smart❑View1 is enabled only in HDMI mode.

● Smart❑View2 is enabled only in DTV and HDMI modes.

▶

English

◀

● Position : Adjust the picture position. It is only available in Wide❑Zoom .

● Zoom/Position : Adjust the picture size and position. It is only available in

Zoom .

N NOTE

● After selecting Screen❑Fit in HDMI (1080i / 1080p), you may need to centre the picture:

1. Press the u or d button to select Position .

2. Press the ENTERE button.

3. Press the u, d, l or r button to move the picture.

● Depending on the input source, the picture size options may vary.

● If you want to reset the position you adjusted, select Reset in the

Position screen. The picture will be set to its default position.

▶ ◀

English English

English

▶ ◀

● The available items may differ depending on the selected mode.

● When connecting a PC, only 16:9❑ and 4:3 modes can be adjusted.

● Settings can be adjusted and stored for each external device connected to an input on the TV.

● If you use the Screen❑Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan function.

● 4:3❑Screen❑Size❑(16:9❑/❑Wide❑Zoom❑/❑Zoom❑/❑4:3) : Available only when picture size is set to Auto❑Wide . You can determine the desired picture size at the 4:3 WSS (Wide Screen Service) size or the original size. Each European country requires different picture size.

▶

English

❑ ❑ Changing❑the❑Picture❑Options

◀

■ ❑ Advanced❑Settings

O ❑ MENUm❑→❑ Picture ❑ →❑ Advanced❑Settings ❑ →❑ENTERE

(available in Standard❑/❑Movie mode)

You can adjust the detailed setting for the screen including colour and contrast.

Black❑Tone

Advanced❑Settings

:❑Off

Dynamic❑Contrast :❑Medium N When connecting a PC, you can only make changes to Gamma and ❑

White❑Balance .

● Black❑Tone❑(Off❑/❑Dark❑/❑Darker❑/❑

Darkest) : Select the black level to adjust the screen depth.

Shadow❑Detail

Gamma

RGB❑Only❑Mode

Colour❑Space

White❑Balance

▼

:❑0

:❑0

:❑Off

:❑Native

►

U Move E Enter R Return

● The displayed image may differ depending on the model.

▶ ◀

English English

English

▶ ◀

● Dynamic❑Contrast❑(Off❑/❑Low❑/❑Medium❑/❑High) : Adjust the screen contrast.

● Shadow❑Detail❑ for LED and LCD TV : Increase the brightness of dark images.

● Gamma : Adjust the primary colour intensity.

● RGB❑Only❑Mode❑(Off❑/❑Red❑/❑Green❑/❑Blue) : Displays the Red, Green and

Blue colour for making fine adjustments to the hue and saturation.

● Colour❑Space❑(Auto❑/❑Native) : Adjust the range of colours available to create the image.

▶

English

◀

● White❑Balance : Adjust the colour temperature for a more natural picture.

R-Offset❑/❑G-Offset❑/❑B-Offset : Adjust each colour’s (red, green, blue) darkness.

R-Gain❑/❑G-Gain❑/❑B-Gain : Adjust each colour’s (red, green, blue) brightness.

Reset : Resets the White❑Balance to its default settings.

● Flesh❑Tone : Emphasize pink “Flesh Tone”.

● Edge❑Enhancement❑(Off❑/❑On) : Emphasize object boundaries.

● Motion❑Lighting❑(Off❑/❑On) : Reduce power consumption by brightness control adapted motion.

● LED❑Motion❑Plus❑(Off❑/❑On)❑ for LED 5 series 40 inches : Removes drag from fast scenes with a lot of movement to provide a clear picture.

▶ ◀

English English

English

▶ ◀

■ ❑ Picture❑Options

O ❑ MENUm❑→❑ Picture ❑ →❑ Picture❑Options ❑ →❑ENTERE

N When connecting a PC, you can only make changes to the Colour❑Tone .

● Colour❑Tone❑(Cool❑/❑Standard❑/❑

Warm1❑/❑Warm2)

N Warm1 or Warm2 will be deactivated when the picture mode is Dynamic .

Picture❑Options

Colour❑Tone

Digital❑Noise❑Filter

MPEG❑Noise❑Filter

HDMI❑Black❑Level

Film❑Mode

:❑Standard

:❑Auto

:❑Auto

:❑Normal

:❑Off

N Settings can be adjusted and stored for each external device connected to an input on the TV.

►

U Move❑ E Enter❑ R Return

● The displayed image may differ depending on the model.

▶

English

◀

● Digital❑Noise❑Filter❑(Off❑/❑Low❑/❑Medium❑/❑High❑/❑Auto❑/❑Auto❑Visualisation) :

If the broadcast signal received by your TV is weak, you can activate the

Digital❑Noise❑Filter feature to reduce any static and ghosting that may appear on the screen.

N When the signal is weak, try other options until the best picture is displayed.

Auto❑Visualisation : When changing analogue channels, displays signal strength.

N Only available for analogue channels.

N When the❑INFO button is pressed, the signal strength bar is displayed.

N When bar is green, you are receiving the best possible signal.

● MPEG❑Noise❑Filter❑(Off❑/❑Low❑/❑Medium❑/❑High❑/❑Auto) : Reduces MPEG noise to provide improved picture quality.

▶ ◀

English English

English

▶ ◀

● HDMI❑Black❑Level❑(Low❑/❑Normal) : Selects the black level on the screen to adjust the screen depth.

N Available only in HDMI mode (RGB signals).

● Film❑Mode❑(Off❑/❑Auto1❑/❑Auto2❑/❑Cinema❑Smooth❑ for PDP TV ) : Sets the TV to automatically sense and process film signals from all sources and adjust the picture for optimum quality.

N Available in TV mode, EXT and HDMI (1080i).

N If the screen does not seem natural, change its option to Off❑/ Auto1❑/

Auto2 in Film❑Mode .

N The Cinema❑Smooth function is only activated when HDMI 24Hz signal is inputted.

▶

English

◀

■ ❑ Reset❑Picture❑(OK❑/❑Cancel)

Resets your current picture mode to its default settings.

English

▶ ◀

English

English

❑ ❑ Changing❑the❑Preset❑Sound❑Mode

O ❑ MENUm❑→❑ Sound ❑ →❑ Sound❑Mode❑ →❑ENTERE

▶ ◀

■ ❑ Sound❑Mode ❑t

● Standard : Selects the normal sound mode.

● Music : Emphasizes music over voices.

● Movie : Provides the best sound for movies.

● Clear❑Voice : Emphasizes voices over other sounds.

● Amplify : Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired.

▶

English

❑ ❑ Adjusting❑Sound❑Settings

O ❑ MENUm❑→❑ Sound ❑ → Sound❑Effect → ENTERE

◀

■ ❑ Sound❑Effect

(standard sound mode only)

Use the up and down arrow keys to select an option, and then press ENTERE.

● SRS❑TruSurround❑HD❑(Off❑/❑On) t

(standard sound mode only)

This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF (Head Related Transfer Function) technology.

▶ ◀

English English

English

▶ ◀

● SRS❑TruDialog❑(Off❑/❑On)

(standard sound mode only)

This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more clearly.

● Equalizer

Use Equalizer to customize sound setting for each speaker.

Balance : Adjusts the balance between the right and left speaker.

100Hz❑/❑300Hz❑/❑1kHz❑/❑3kHz❑/❑10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies.

Reset : Resets the equalizer to its default settings.

▶

English

◀

■ ❑ Broadcast❑Audio❑Options

● Audio❑Language❑ t

(digital channels only)

Change the default value for audio languages.

N The available language may differ depending on the broadcast.

● Audio❑Format❑

(digital channels only)

Select the audio format.

▶ ◀

English English

English

▶ ◀

● Audio❑Description❑

(not available in all locations) (digital channels only)

This function handles the Audio Stream for the AD (Audio Description) which is sent along with the Main audio from the broadcaster.

N Audio❑Description❑(Off❑/❑On) : Turn the audio description function on or off.

N Volume : Adjust the audio description volume.

▶

English

◀

■ ❑ Additional❑Settings

● DTV❑Audio❑Level❑(MPEG❑/❑HE-AAC)❑ (digital channels only): This function allows you to reduce the disparity of a voice signal (which is one of the signals received during a digital TV broadcast) to a desired level.

N According to the type of broadcast signal, MPEG❑/❑HE-AAC can be adjusted between -10dB and 0dB.

N To increase or decrease the volume, adjust between the range 0 and -10 respectively.

▶ ◀

English English

English

▶ ◀

● Dolby❑Digital❑Comp❑(Line❑/❑RF) : This function minimizes signal disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC,

ATV Sound).

N Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night time.

Line : Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB.

RF : Set the output level for signals greater or less than -20dB (reference) to either -10dB or -20dB.

▶

English

◀

■ ❑ Speaker❑Settings

● Auto❑Volume❑(Off❑/❑Normal❑/❑Night)

To equalize the volume level on each channel, set to Normal .

Night : This mode provides an improved sound experience compared to

Normal mode, making almost no noise. It is useful at night.

N To use the volume control on the source device connected to the TV, set Auto❑Volume to Off on the TV. Otherwise, a change to the volume control of the source device may not be applied.

▶ ◀

English English

English

▶ ◀

■ ❑ Reset❑Sound❑(OK❑/❑Cancel)

Reset all sound settings to the factory defaults.

English

▶

◀

❑ ❑ Selecting❑the❑Sound❑Mode❑ t

When you set to Dual I-II , the current sound mode is displayed on the screen.

A2 Stereo

NICAM Stereo

Audio Type

Mono

Stereo

Dual

Mono

Stereo

Dual

Dual I-II

Mono

Stereo❑ ↔ ❑Mono

Dual I❑ ↔ ❑Dual II

Mono

Mono❑ ↔ ❑Stereo

Mono❑ → ❑Dual I

 ❑Dual II❑ 

Default

Automatic change

Dual I

Automatic change

Dual I

N If the stereo signal is weak and an automatic switching, occurs, then switch to the mono.

N Only activated in stereo sound signal.

N Only available when the Source is set to TV .

▶ ◀

English English

English

❑ ❑ Setting❑the❑Time

O ❑ MENUm❑→❑ System ❑ →❑ Time ❑ →❑ENTERE

▶ ◀

■ ❑ Time ❑

N The current time will appear every time you press the INFO button.

● Clock : Setting the clock is for using various timer features of the TV.

N If you disconnect the power cord, you have to set the clock again.

Clock❑Mode : Set up the current time manually or automatically.

– Auto : Set the current time automatically using the time from a digital channel.

N The antenna must be connected in order to set the time automatically.

▶

English

◀

– Manual : Set the current time manually.

N Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually.

Clock❑Set : Set the Day,❑Month,❑Year,❑Hour and Minute manually.

N Available only when Clock❑Mode is set to Manual .

Time❑Zone (depending on the country): Select your time zone.

N This function is only available when the Clock❑Mode is set to Auto .

N When selecting Manual in Time❑Zone , GMT and DST will be activated.

▶ ◀

English English

English

▶ ◀

❑ ❑ Using❑the❑Sleep❑Timer

O ❑ MENUm❑→❑ System ❑ →❑ Time ❑ →❑ Sleep❑Timer ❑ →❑ENTERE

● Sleep❑Timer t: Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes).

N To cancel Sleep❑Timer , select Off .

▶

English

◀

❑ ❑ Setting❑the❑On❑/❑Off❑Timer

O ❑ MENUm❑→❑ System ❑ →❑ Time ❑ →❑ On❑Timer❑ <or> ❑Off❑Timer❑ → ENTERE

● On❑Timer❑1❑/❑On❑Timer❑2❑/❑On❑Timer❑

3 : Three different on timer settings

Setup ❑

On❑Timer❑1

Sun Mon Tue Wed Thu Fri Sat can be made. You must set the clock

Once first.

On❑Time Volume

– Setup : Select Off,❑Once,❑

Everyday,❑Mon~Fri,❑Mon~Sat,❑

Sat~Sun or Manual to set at your convenience. If you select

Manual , you can set up the day you want to activate the timer.

04

Source

TV

00

Antenna

ATV

20

Channel

3

U❑Adjust❑❑❑L❑Move❑❑❑E❑Enter❑❑❑R❑Return

● The displayed image may differ depending on the model.

N The c mark indicates the day you’ve selected.

▶ ◀

English English

English

▶ ◀

– On❑Time : Set the hour and minute.

– Volume : Set the desired volume level.

– Source : Select TV or USB content to be played when the TV is turned on automatically. ( USB can be selected only when a USB device is connected to the TV)

– Antenna (when the Source is set to TV ): Select ATV or DTV .

– Channel (when the Source is set to TV ): Select the desired channel.

– Music❑/❑Photo (when the Source is set to USB ): Select a folder in the

USB device containing music or photo files to be played when the TV is turned on automatically.

▶

English

◀

N NOTE

● If there is no music file on the USB device or the folder containing a music file is not selected, the Timer function does not operate correctly.

● When there is only one photo file in the USB device, the Slide

Show will not play.

● If a folder name is too long, the folder cannot be selected.

● Each USB you use is assigned its own folder. When using more than one of the same type of USB, make sure the folders assigned to each USB have different names.

▶ ◀

● It is recommended that you use a USB memory stick and a multi card reader when using On❑Timer .

● The On❑Timer function may not work with USB devices with a built-in battery, MP3 players, or PMPs made by some manufacturers because these devices take a long time to be recognized.

English English

English

▶ ◀

● Off❑Timer❑1❑/❑Off❑Timer❑2❑/❑Off❑Timer❑

3 : Three different off timer settings can be made. You must set the clock first.

Setup : Select Off,❑Once,❑Everyday,❑

Mon~Fri,❑Mon~Sat,❑Sat~Sun or

Manual to set at your convenience.

If you select Manual , you can set up the day you want to activate the timer.

N The c mark indicates the day you’ve selected.

Off❑Time : Set the hour and minute.

Setup ❑

Once

Off❑Time

04

Off❑Timer❑1

Sun Mon Tue Wed Thu Fri Sat

00

L❑Move❑❑●U❑Adjust❑❑❑E❑Enter❑❑❑R❑Return

● The displayed image may differ depending on the model.

▶

English

❑ ❑ Locking❑Programme

O ❑ MENUm❑→❑ System ❑ →❑ Security ❑ →❑ENTERE

◀

■ ❑ Security

N The PIN input screen appears before the setup screen.

N Enter your 4-digit PIN. Change the PIN using the Change❑PIN option.

● Channel❑Lock❑(Off❑/❑On) : Lock channels in Channel Manager, to prevent unauthorized users, such as children, from watching unsuitable programme.

N Only available when the Input source is set to TV .

▶ ◀

English English

English

▶ ◀

● Program❑Rating❑Lock (depending on the country): Prevent unauthorized users, such as children, from watching unsuitable programme with a userdefined 4-digit PIN code. If the selected channel is locked, the “\” symbol will be displayed.

N The items of Program❑Rating❑Lock differs depending on the country.

● Change❑PIN : Change your password required to set up the TV.

▶

English

❑ ❑ Picture❑In❑Picture❑(PIP)

O ❑ MENUm❑→❑ System ❑ →❑ PIP ❑ →❑ENTERE

◀

■ ❑ PIP❑ t

You can watch the TV tuner and one external video source simultaneously. PIP

(Picture-in-Picture) does not function in the same mode.

N NOTE

● For PIP sound, refer to the Sound❑Select instructions.

● If you turn the TV off while watching in PIP mode, the PIP window will disappear.

● You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke.

▶ ◀

English English

English

▶ ◀

● PIP settings

Main picture

HDMI

Sub picture

TV

● PIP❑(Off❑/❑On) : Activate or deactivate the PIP function.

● Channel : Select the channel for the sub-screen.

● Size (Õ / Ã): Select a size for the sub-picture.

● Position (à / – / — / œ): Select a position for the sub-picture.

● Sound❑Select❑(Main❑/❑Sub) : You can choose the desired sound ( Main /

Sub ) in PIP mode.

▶

English

◀

❑ ❑ Economical❑Solutions

O ❑ MENUm❑→❑ System ❑ →❑ Eco❑Solution ❑ →❑ENTERE

■ ❑ Eco❑Solution

● Energy❑Saving❑(Off❑/❑Low❑/❑Medium❑/❑High❑/❑Picture❑Off) t: This adjusts the brightness of the TV in order to reduce power consumption. If you select Picture❑Off , the screen is turned off, but the sound remains on. Press any button except volume button to turn on the screen.

▶ ◀

English English

English

▶ ◀

● Eco❑Sensor❑(Off❑/❑On)❑ for LED 5 series 40 inches, LCD 5 series and PDP TV : To enhance your power savings; the picture settings will automatically adapt to the light in the room.

N If you adjust the Backlight❑ for LED and LCD TV / Cell❑Light❑ for PDP TV , the

Eco❑Sensor will be set to Off .

Min❑Backlight❑ for LED and LCD TV / Min❑Cell❑Light❑ for PDP TV : When Eco❑ sensor is On , the minimum screen brightness can be adjusted manually.

N If Eco❑Sensor is On , the display brightness may change (become slightly darker or brighter) depending on the surrounding light intensity.

▶

English

◀

● No-Signal❑Power❑Off❑(Off❑/❑15❑min❑/❑30❑min❑/❑60❑min) :

To avoid unnecessary energy consumption, set how long you want the TV to remain on if it’s not receiving a signal.

● Auto❑Power❑Off❑(Off❑/❑On) : The TV will be automatically turned off when no user operation is received for 4 hours.

▶ ◀

English English

English

❑ ❑ Other❑Features

O ❑ MENUm❑→❑ System ❑ →❑ENTERE

▶ ◀

■ ❑ Language

● Menu❑Language : Set the menu language.

● Teletext❑Language (depending on the country): Set a desired language for teletext.

N English is the default in cases where the selected language is unavailable in the broadcast.

▶

English

◀

● Preference❑(Primary❑Audio❑Language❑/❑Secondary❑Audio❑Language❑/❑

Primary❑Subtitle❑Language❑/❑Secondary❑Subtitle❑Language❑/❑Primary❑

Teletext❑Language❑/❑Secondary❑Teletext❑Language) : Select a language, which will be the default language when a channel is selected.

N Primary❑Teletext❑Language and Secondary❑Teletext❑Language may not be supported in some locations.

▶ ◀

English English

English

▶ ◀

■ ❑ Subtitle

Use this menu to set the Subtitle mode.

● Subtitle❑(Off❑/❑On) : Switches subtitles on or off.

● Subtitle❑Mode❑(Normal❑/❑Hearing❑Impaired) : Sets the subtitle mode.

● Subtitle❑Language : Sets the subtitle language.

N If the programme you are watching does not support the Hearing❑

Impaired function, Normal automatically activates even if the Hearing❑

Impaired mode is selected.

N English is the default in cases where the selected language is unavailable in the broadcast.

▶

English

◀

■ ❑ Digital❑Text❑(Disable❑/❑Enable) ❑

(UK only)

If the programme broadcasts with digital text, this feature is enabled.

N MHEG❑(Multimedia❑and❑Hypermedia❑Information❑Coding❑Experts❑Group)

An International standard for data encoding systems used in multimedia and hypermedia. This is at a higher level than the MPEG system which includes data-linking hypermedia such as still images, character service, animation, graphic and video files as well as multimedia data. MHEG is user runtime interaction technology and is being applied to various fields including

VOD (Video-On-Demand), ITV (Interactive TV), EC (Electronic Commerce), teleeducation, tele-conferencing, digital libraries and network games.

▶ ◀

English English

English

▶ ◀

■ ❑ Auto❑Protection❑Time❑

for LED and LCD TV

● Auto❑Protection❑Time❑(Off❑/❑2❑hours❑/❑4❑hours❑/❑8❑hours❑/❑10❑hours) : If the screen remains idle with a still image for a certain period of time defined by the user, the screen saver is activated to prevent the formation of ghost images on the screen.

▶

English

◀

■ ❑ Screen❑Burn❑Protection❑

for PDP TV

To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. The Time setting allows you to programme the time between movement of the picture in minutes.

● Pixel❑Shift❑ ( Off / On ): Using this function, you can minutely move pixels on the

PDP in horizontal or vertical direction to minimize after image on the screen.

N Optimum condition for pixel shift

Horizontal

Vertical

Time (minute)

Item

0~4

0~4

1~4❑min

TV❑/❑HDMI

4

4

4❑min

▶ ◀

English English

English

▶ ◀

N The Pixel❑Shift value may differ depending on the monitor size (inches) and mode.

N This function is not available in the Screen❑Fit mode.

● Auto❑Protection❑Time❑ ( Off / 10❑min / 20❑min / 40❑min / 1❑hour ): If the screen remains idle with a still image for a certain period of time defined by the user, the screen saver is activated to prevent the formation of ghost images on the screen.

● Scrolling : This function removes after-images on the screen by moving all the pixels on the PDP according to a pattern. Use this function when there are remaining after images or symbols on the screen, especially when you displayed a still image on the screen for a long time.

▶

English

◀

N The after-image removal function has to be executed for a long time

(approximately 1 hour) to effectively remove after-images on the screen.

If the after-image is not removed after performing the function, repeat the function again.

N Press any key on the remote control to cancel this feature.

● Side❑Grey❑ ( Light / Dark ): When you watch TV with the screen ratio set to 4:3, the screen is prevented from any damage by adjusting the white balance on both extreme left and right sides.

▶ ◀

English English

English

▶ ◀

■ ❑ General

● Game❑Mode❑(Off❑/❑On) : When connecting to a game console such as

PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting game mode.

N NOTE

● Precautions and limitations for game mode

– To disconnect the game console and connect another external device, set Game❑Mode❑ to Off in the setup menu.

– If you display the TV menu in Game❑Mode , the screen shakes slightly.

● Game❑Mode is not available in TV mode.

▶

English

◀

● After connecting the game console, set Game❑Mode to On to prevent poor picture quality.

● If Game❑Mode is On :

– Picture❑Mode is set to Standard and Sound❑Mode is set to

Movie .

● Menu❑Transparency❑(Bright❑/❑Dark) : Set the Transparency of the menu.

● Boot❑Logo❑(Off❑/❑On) : Display Samsung logo when the TV is turned on.

▶ ◀

English English

English

▶ ◀

■ ❑ Common❑Interface

● CI❑Menu : This enables the user to select from the CAM-provided menu.

Select the CI Menu based on the menu PC Card.

● Application❑Info : View information on the CAM inserted into the CI slot and on the “CI or CI+ CARD” which is inserted into the CAM. You can install the

CAM anytime whether the TV is on or off.

1. Purchase a CI CAM module at your nearest dealer or by phone.

2. Firmly insert the “CI or CI+ CARD” into the CAM in the direction of the arrow.

3. Insert the CAM with the “CI or CI+ CARD” into the common interface slot, in the direction of the arrow so that it aligns parallel with the slot.

4. Check if you can see a picture on a scrambled signal channel.

▶

English

❑ ❑ Support❑Menu

◀

O ❑ MENUm❑→❑ Support ❑ → e-Manual ❑ → ENTERE

■ ❑ e-Manual

You can read the introduction and instructions about the TV features stored in your TV.

N For the detailed information about e-Manual Screen, refer to “How to use the e-Manual” in User Manual.

▶ ◀

English English

English

▶ ◀

■ ❑ Self❑Diagnosis

N Self❑Diagnosis might take few seconds, this is part of the normal operation of the TV.

● Picture❑Test❑(Yes❑/❑No) : Use to check for picture problems.

Yes : If the test picture does not appear or there is noise in the test picture, select Yes . There may be a problem with the TV. Contact Samsung’s Call

Centre for assistance.

No : If the test picture is properly displayed, select No . There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual.

▶

English

◀

● Sound❑Test❑(Yes❑/❑No) : Use the built-in melody sound to check for sound problems.

Yes : If you can hear sound only from one speaker or not at all during the sound test, select Yes . There may be a problem with the TV. Contact

Samsung’s Call Centre for assistance.

No : If you can hear sound from the speakers, select No . There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual.

▶ ◀

English English

English

▶ ◀

● Signal❑Information : (digital channels only) HDTV channel’s reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength.

● Troubleshooting : If the TV seems to have a problem, refer to this description.

N If none of these troubleshooting tips apply, contact the Samsung customer service centre.

▶

English

◀

■ ❑ Software❑Upgrade

Software❑Upgrade can be performed by downloading the latest firmware from

“www.samsung.com” to a USB memory device.

Current❑Version -the software already installed in the TV.

N Software is represented as “Year/

Month/Day_Version”.

Current❑Version

Software❑Upgrade

2011/01/18_000001

By❑USB

By❑Channel

Alternative❑Software

Standby❑Mode❑Upgrade

----/--/--_------

:❑Off

U❑Move❑❑❑❑E❑Enter❑❑❑❑R❑Return

● The displayed image may differ depending on the model.

▶ ◀

English English

English

▶ ◀

Installing❑the❑Latest❑Version

● By❑USB : Insert a USB drive containing the firmware upgrade file, downloaded from

TV Back Panel

“www.samsung.com” into the TV. Please be careful not to disconnect the power or remove the USB drive until upgrades are complete. The TV will be turned off and on automatically after completing the firmware upgrade. When software is upgraded,

● The displayed image may differ depending on the model.

video and audio settings you have made will return to their default settings. We advise you to write down your settings so that you can easily reset them after the upgrade.

▶

English

◀

● By❑Channel : Upgrade the software using the broadcasting signal.

N If the function is selected during the software transmission period, software will be automatically searched and downloaded.

N The time required to download the software is determined by the signal status.

● Alternative❑Software❑ (backup): If there is an issue with the new firmware and it is affecting operation, you can change the software to the previous version.

N If the software was changed, existing software is displayed.

● Standby❑Mode❑Upgrade❑(Off❑/❑1❑hour❑later❑/❑2❑hours❑later❑/❑00:00❑/❑02:00❑/❑

12:00❑/❑14:00) : A manual upgrade will be automatically performed at selected time. Since the power of the unit is turned on internally, the screen may be turned on slightly for the product. This phenomenon may continue for more than 1 hour until the software upgrade is complete.

▶ ◀

English English

English

▶ ◀

■ ❑ Contact❑Samsung

View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centres, and how to download products and software.

■ ❑ Contents❑Home

You can enjoy useful and various contents.

▶

English

◀

❑ ❑ Using❑the❑My❑Downloads

Enjoy photos, music files saved on a USB Mass Storage Class (MSC) device.

1. Press the CONTENT button to select My❑Downloads .

2. Press ▲/▼ button to select desired menu ( Photos , Music ), then press the ENTERE button.

My Downloads

Source

Photos

Music

Watch❑TV

● The displayed image may differ depending on the model.

▶ ◀

English English

English

▶ ◀

❑ ❑ Connecting❑a❑USB❑Device

1. Turn on your TV.

2. Connect a USB device containing photo, music files to the USB❑jack on the back of the TV.

3. When USB is connected to the TV, popup window appears. Then you can select New❑device❑connected .

TV Rear Panel

● The displayed image may differ depending on the model.

▶

English

◀

N It might not work properly with unlicenced multimedia files.

N Need-to-Know List before using My❑Downloads

● MTP (Media Transfer Protocol) is not supported.

● The file system supports FAT16, FAT32 and NTFS.

● Certain types of USB Digital camera may not be compatible with this TV.

● My❑Downloads only supports USB Mass Storage Class (MSC) devices.

MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not supported). Devices should be connected directly to the TV’s USB port.

● Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss.

▶ ◀

English English

English

▶ ◀

● USB (HDD) is not supported.

● Do not disconnect the USB device while it is loading.

● The higher the resolution of the image, the longer it takes to display on the screen.

● The maximum supported JPEG resolution is 15360 x 8640 pixels.

● For unsupported or corrupted files, the “Not Supported File Format” message is displayed.

● If the files are sorted by Folder❑View , up to 1000 files can be displayed in each folder.

▶

English

◀

● MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management (DRM) is a technology that supports the creation, distribution and management of the content in an integrated and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well as managing billings and settlements.

● If more than 2 PTP devices are connected, you can only use one at a time.

● If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high power (more than 500mA or 5V) may not be supported.

▶ ◀

English English

English

▶ ◀

● If an over-power warning message is displayed while you are connecting or using a USB device, the device may not be recognized or may malfunction.

● If the TV has been no input during time set in Auto❑Protection❑Time , the

Screensaver will run.

● The power-saving mode of some external hard disk drives may be released automatically when connected to the TV.

▶

English

◀

● If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.

● If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is not played, connect the USB device to the PC, format the device and check the connection.

● If a file deleted from the PC is still found when My❑Downloads is run, use the

“Empty the Recycle Bin” function on the PC to permanently delete the file.

● My❑Downloads only supports sequential jpeg format.

▶ ◀

English English

English

▶ ◀

❑ ❑ Screen❑Display

Move to the desired file using the ◄/►/▲/▼ buttons and then press the

ENTERE. The file is played. My❑Downloads❑ screen may differ depending on the way to enter the screen.

Information:

You can ascertain the selected device name, contents mode, folder/ file name, page and sorting list.

Music

File❑List❑Section:

You can confirm the files and groups that are sorted by category.

▶

Contents❑mode❑/❑Device❑name:

You can select the desired

Contents mode or Device name.

C B D

Operation❑Buttons:

-

C A

Edit❑Mode available in Music.

): Selects the desired music. The check box is shown in the screen to check the music you want. It is only

- T Tools : Displays the option menu.

- R Return : Move to the previous step.

- E Select : Select the contents in Edit❑Mode .

English

◀

■ ❑ Music

Playing❑Music

1.❑ Press the ◄/►/▲/▼ button to select the desired Music in the file list.

Music

2. Press the ENTERE button.

N Only displays the files with MP3 file extension. Other file extensions are not displayed, even if they are saved on the same USB device.

E Play L Pages T Tools R Return

N If the sound is abnormal when playing MP3 files, adjust the Equalizer in the Sound menu. (An overmodulated MP3 file may cause a sound problem.)

▶ ◀

English English

English

▶ ◀

Playing❑the❑selected❑music

1. Press the

C

(

A

) button.

2. Select the desired music.

N The check box appears to the left of the selected files.

3. Press the TOOLS button and select Play❑Selected❑Contents .

N You can select or deselect all music pressing the Select❑All❑/❑Deselect❑

All .

▶

English

◀

■ ❑ Photos

Viewing❑a❑Photo❑(or❑Slide❑Show)

1.❑ Press the ◄/►/▲/▼ button to select the desired photo in the file list.

Nomal

2. Press the ENTERE button.

● When a selected photo is displayed, press the

ENTERE button to start the slide show.

E Pause L Previous/Next T Tools R Return

● During the slide show, all files in the file list will be displayed in order.

N Music files can be automatically played during the Slide Show if the

Background❑Music is set to On .

▶ ◀

English English

English

▶ ◀

❑ ❑ My❑Downloads❑-❑Additional❑Functions

Music/Photos❑Play❑Option❑menu

During playing a file, press the TOOLS button.

Category Operation

Shuffle❑Mode You can play the music randomly.

Repeat❑Mode

Picture❑Mode

You can play music files repeatedly.

You can adjust the picture setting.

Music c c

Photos c

▶

English

◀

Category

Sound❑Mode

Start❑Slide❑Show❑/❑

Pause❑Slide❑Show

Slide❑Show❑Speed

Background❑Music

Operation

You can adjust the sound setting.

You can start or pause a Slide Show.

You can select the slide show speed during the slide show.

You can on/off background music when watching a Slide Show.

Music c

Photos c c c c ▶ ◀

English English

English

▶ ◀

Category

Background❑Music❑

Setting

Zoom

Rotate

Information

Operation

You can select background music when watching a Slide Show.

You can zoom into images in full screen mode.

You can rotate images in full screen mode.

You can see detailed information about the played file.

Music c

Photos c c c c ▶

English

◀

❑ ❑ Analogue❑Channel❑Teletext❑Feature

The index page of the Teletext service gives you information on how to use the service. For Teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed.

You can change Teletext pages by pressing the numeric buttons on the remote control.

● 0●(mode): Selects the Teletext mode (LIST/FLOF). If pressed during LIST mode, switches the mode to List save mode. In List save mode, you can save a Teletext page into a list using the 8(store) button.

● /●(Teletext on/mix/off): Activates the Teletext mode for the current channel. Press the button twice to overlap the Teletext mode with the current broadcasting screen. Press it one more time to exit teletext.

▶ ◀

English English

English

▶ ◀

● 1●(sub-page): Displays the available sub-page.

● 8 (store): Stores the Teletext pages.

● 6●(index): Displays the index (contents) page at any time while you are viewing Teletext.

● 4●(size): Displays the teletext on the upper half of the screen in double-size.

To move the text to the lower half of the screen, press it again. For normal display, press it once again.

● 9 (hold): Holds the display at the current page, in the case that there are several secondary pages that follow automaticially. To undo, press it again.

● 2●(page up): Displays the next Teletext page.

● 3●(page down): Displays the previous Teletext page.

▶

English

◀

● 5 (reveal): Displays the hidden text (answers to quiz games, for example). To display the normal screen, press it again.

● 7●(cancel): Shrinks the Teletext display to overlap with the current broadcast.

● Colour buttons (red, green, yellow, blue): If the FASTEXT system is used by the broadcasting company, the different topics on a Teletext page are colourcoded and can be selected by pressing the coloured buttons. Press the colour corresponding to the topic of your choice. A new colourcoded page is displayed. Items can be selected in the same way. To display the previous or next page, press the corresponding coloured button.

▶ ◀

English English

English

▶ ◀

The❑Teletext❑pages❑are❑organized❑according❑to❑six❑categories:

B

C

D

E

F

Part

A

Contents

Selected page number.

Broadcasting channel identity.

Current page number or search indications.

Date and time.

Text.

Status information. FASTEXT information.

A B C D

E

F

English

▶

◀

❑ ❑ Anti-theft❑Kensington❑Lock❑

(depending on the model)

The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for additional information on proper use.

N Please find a “K” icon on the rear of the TV. A kensington slot is beside the “K” icon.

N The position and colour may differ depending on the model.

To lock the product, follow these steps:

TV Rear 1

▶ ◀

1. Wrap the Kensington lock cable around a large, stationary object such as desk or chair.

Optional

English English

English

▶ ◀

2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable.

3. Insert the locking device into the Kensington slot on the product 1 .

4. Lock the lock.

N NOTE

● These are general instructions. For exact instructions, see the User manual supplied with the locking device.

● The locking device has to be purchased separately.

● The location of the Kensington slot may be different depending on the TV model.

▶

English

◀

❑ ❑ Connections❑Common❑Interface❑Slot

To watch paid channels, the “CI or CI+

CARD” must be inserted.

● If you do not insert the “CI or CI+ CARD,” some channels will display the message

“Scrambled Signal”.

● The pairing information containing a telephone number, the “CI or CI+ CARD”

● The displayed image may differ depending on the model.

ID, the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.

● When the configuration of channel information has finished, the message

“Updating Completed” is displayed, indicating the channel list is updated.

▶ ◀

English English

English

▶ ◀

N NOTE

● You must obtain a “CI or CI+ CARD” from a local cable service provider.

● When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it.

● Insert the “CI or CI+ CARD” in the direction marked on the card.

● The location of the COMMON INTERFACE slot may be different depending on the model.

● “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.

● If you have any problems, please contact a service provider.

● Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen.

▶

English

◀

❑ ❑ Troubleshooting

If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www.samsung.com”, then click on

Support.

Issues

Picture Quality

Solutions❑and❑Explanations

First of all, please perform the Picture❑Test and confirm that your TV is properly displaying test image. (go to MENU -

Support - Self❑Diagnosis - Picture❑Test ) If the test image is properly displayed, the poor picture may caused by the source or signal.

▶ ◀

English English

English

▶ ◀

Issues

The TV image does not look as good as it did in the store.

Solutions❑and❑Explanations

● If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI to deliver HD (high definition) picture quality.

● Cable/Satellite subscribers: Try HD stations from the channel line up.

● Antenna connection: Try HD stations after performing

Auto tuning.

N Many HD channels are up scaled from

SD(Standard Definition) contents.

● Adjust the Cable/Set top box video output resolution to

1080i or 720p.

● Make sure you are watching the TV at the minimum recommended distance based on the size and definition of the signal.

▶

English

◀

Issues

The picture is distorted: macroblock error, small block, dots, pixelization

Solutions❑and❑Explanations

● Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action movies.

● Low signal level or bad quality can cause picture distortion. This is not a TV issue.

● Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analogue and digital TV.

▶ ◀

English English

English

Issues

There is poor colour or brightness.

▶ ◀

There is a dotted line on the edge of the screen.

Solutions❑and❑Explanations

● Adjust the Picture options in the TV menu. (go to Picture❑

Mode / Colour❑/❑Brightness❑/❑Sharpness )

● Adjust Energy❑Saving option in the TV menu. (go to

MENU - System❑-❑Eco❑Solution❑-❑Energy❑Saving )

● Try resetting the picture to view the default picture settings. (go to MENU - Picture❑-❑Reset❑Picture )

● If the picture size is set to Screen❑Fit , change it to 16:9 .

● Change cable/satellite box resolution.

▶

English

◀

Issues

When changing channels, the picture freezes or is distorted or delayed.

Sound Quality

There is no sound or the sound is too low at maximum volume.

Solutions❑and❑Explanations

● If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until the cable box reboots. It may take up to 20 minutes.

● Set the output resolution of the cable box to 1080i or

720p.

First of all, please perform the Sound❑Test to confirm that your TV audio is properly operating. (go to MENU -

Support❑-❑Self❑Diagnosis❑-❑Sound❑Test )

If the audio is OK , the sound problem may caused by the source or signal.

● Please check the volume of the device (Cable/Sat Box,

DVD, Blu-ray etc) connected to your TV.

▶ ◀

English English

English

▶ ◀

Issues

The picture is good but there is no sound.

The speakers are making an inappropriate noise.

Solutions❑and❑Explanations

● If you are using a DVI to HDMI cable, TV set does not support audio.

● Reboot the connected device by reconnecting the device’s power cable.

● If your TV has a headphone jack, make sure there is nothing plugged into it.

● For antenna or cable connections, check the signal strength. Low signal level may cause sound distortion.

▶

English

◀

Issues

No Picture, No Video

The TV will not turn on.

Solutions❑and❑Explanations

● Make sure the AC power cord is securely plugged in to the wall outlet and the TV.

● Make sure the wall outlet is working.

● Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to

“The remote control does not work” below.

▶ ◀

English English

English

▶ ◀

Issues

The TV turns off automatically.

Solutions❑and❑Explanations

● Ensure the Sleep❑Timer is set to Off in the Time menu.

● If your PC is connected to the TV, check your PC power settings.

● Make sure the AC power cord is plugged in securely to the wall outlet and the TV.

● When watching TV from an antenna or cable connection, the TV will turn off after 10 ~ 15 minutes if there is no signal.

▶

English

◀

Issues

There is no picture/ video.

Solutions❑and❑Explanations

● Check cable connections (remove and reconnect all cables connected to the TV and external devices).

● Set your external devices’ (Cable/Set top Box, DVD,

Blu-ray etc) video outputs to match the connections to the TV input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.

● Make sure your connected devices are powered on.

● Be sure to select the TV’s correct source by pressing the

SOURCE button on the TV remote.

● Reboot the connected device by reconnecting the device’s power cable.

▶ ◀

English English

English

▶ ◀

Issues Solutions❑and❑Explanations

RF(Cable/Antenna) Connection

The TV is not receiving all channels.

● Make sure the Antenna cable is connected securely.

● Please try Plug❑&❑Play (Initial setup) to add available channels to the channel list. Go to MENU - System❑

-❑Plug❑&❑Play (Initial setup) and wait for all available channels to be stored.

The picture is distorted: macro block error small block, dots, pixelization

● Verify the Antenna is positioned correctly.

● Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports and action movies.

● A low signal can cause picture distortion. This is not a

TV issue.

▶

English

◀

Issues

Others

The picture will not display in full screen.

Solutions❑and❑Explanations

● HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.

● Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV.

● Adjust the picture size options on your external device or

TV to full screen.

▶ ◀

English English

English

▶ ◀

Issues

Plasma TV is making humming noise. for PDP TV

Solutions❑and❑Explanations

● Plasma TVs typically make a soft humming sound. This is normal. It’s caused by the electrical charges that are used to create the images on the screen.

● If the humming sound is loud, you may have set the brightness on the TV too high. Try setting the brightness lower.

● You can also have loud humming if the back of your

Plasma TV is too close to a wall or other hard surface.

Also try rerouting your connection cables.

● Improper installation of wall mount can create excessive noise.

▶

English

◀

Issues

The remote control does not work.

The cable/set top box remote control doesn’t turn the TV on or off, or adjust the volume.

A “ Mode❑Not❑

Supported ” message appears.

Solutions❑and❑Explanations

● Replace the remote control batteries with the poles (+/–) in the right direction.

● Clean the sensor’s transmission window on the remote.

● Try pointing the remote directly at the TV from 5~6 feet away.

● Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set user manual for the SAMSUNG TV code.

● Check the supported resolution of the TV, and adjust the external device’s output resolution accordingly.

▶ ◀

English English

English

▶ ◀

Issues

There is a plastic smell from the TV.

The TV Signal❑

Information is unavailable in the Self❑

Diagnosis Test menu.

TV is tilted to the right or left side.

There are difficulties assembling the stand base.

Solutions❑and❑Explanations

● This smell is normal and will dissipate over time.

● This function is only available with digital channels from an Antenna / RF / Coax connection.

● Remove the stand base from the TV and reassemble it.

● Make sure the TV is placed on a flat surface. If you can not remove the screws from the TV, please use a magnetized screw driver.

▶

English

◀

Issues

The Channel menu is grey out (unavailable).

Your settings are lost after 30 minutes or every time the TV is turned off.

You have intermittent loss of audio or video.

Solutions❑and❑Explanations

● The Channel menu is only available when the TV source is selected.

● If the TV is in the Store❑Demo mode, it will reset audio and picture settings every 30 minutes. Change the settings from Store❑Demo mode to Home❑Use mode in the Plug❑&❑Play (Initial setup) procedure. Press the

SOURCE button to select TV mode, and go to MENU

→ System → Plug❑&❑Play (Initial setup) → ENTERE.

● Check the cable connections and reconnect them.

● Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.

▶ ◀

English English

English

▶ ◀

Issues

You see small particles when you look closely at the edge of the frame of the TV.

The PIP menu is not available.

You turned the TV off

45 minutes ago, and it turned on again.

Solutions❑and❑Explanations

● This is part of the product’s design and is not a defect.

● PIP functionality is only available when you are using a

HDMI source.

● It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware downloaded whilst your watching TV.

▶

English

◀

Issues

The message

“ Scramble❑signal ” or “ Weak❑Signal/No❑

Signal ” appears.

There are recurrent picture/sound issues.

A reaction may occur between the rubber cushion pads on the base stand and the top finish of some furniture.

Solutions❑and❑Explanations

● If you are using a CAM CARD (CI/CI+), check that it is installed into the common interface slot.

● If there is still a problem, pull the CAM CARD out of the

TV and insert it into the slot again.

● Check and change the signal/source.

● To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.

▶ ◀

English English

English

❑ ❑ Licence

Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

TheaterSound, SRS and symbol are trademarks of SRS Labs, Inc.

TheaterSound technology is incorporated under licence from SRS Labs, Inc.

▶ ◀

Open❑Source❑Licence❑Notice

In the case of using open source software, Open Source Licences are available on the product menu. Open Source Licence Notice is written only English.

English