Samsung SGH-Z300 User manual

Samsung SGH-Z300 User manual
* Depending on the software installed or your service provider or country, some of the
descriptions in this manual may not match your phone exactly.
* Depending on your country, your phone and accessories may appear different from
the illustrations in this manual.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-07377A
English. 07/2005. Rev 1.1
SGH-Z300
User’s Manual
Use road safety at all times
Do not use a hand-held phone while driving.
Park the vehicle first.
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or illegal.
Switch off the phone when refuelling
Do not use the phone at a refuelling point
(service station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference. Using
them in an aircraft is both illegal and
dangerous.
Switch off the phone near all medical
equipment
Hospitals or health care facilities may be using
equipment that could be sensitive to external
radio frequency energy. Follow any regulations
or rules in force.
Interference
All wireless phones may be subject to
interference, which could affect their
performance.
Be aware of special regulations
Accessories and batteries
Meet any special regulations in force in any area and
always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger.
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories could
damage your phone and may be dangerous.
Your phone is not water-resistant. Keep it dry.
• The phone could explode if the battery is
replaced with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
Sensible use
Qualified service
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Only qualified service personnel may repair your
phone.
Emergency calls
Important safety precautions
Water resistance
For more detailed safety information, see "Health
and safety information" on page 78.
Key in the emergency number for your present
location, then press
.
Keep your phone away from small children
Keep the phone and all its parts, including
accessories, out of the reach of small children.
1
About this Guide
•
This User’s Guide provides you with condensed
information about how to use your phone. To quickly
learn the basics for your phone, please refer to “Get
started” and “Step outside the phone.”
3G
Your phone is capable of operating
in a 3G environment, allowing
much greater data transfer speed,
video streaming, and video
conferencing.
In this guide, the following instruction icons appear:
Indicates that you need to pay careful
attention to the subsequent
information regarding safety or phone
features.
Indicates that you can get more
information on the referenced page.
Indicates that you need to press the
Navigation keys to scroll to the
specified option and then select it.
→
[
]
< >
2
Indicates a key on the phone. For
example, [OK]
Indicates a soft key, whose function is
displayed on the phone screen. For
example, <Msg.>
Special features of your phone
•
Camera and camcorder
Use the camera module on your
phone to take a photo or record a
video.
•
Media player
Play media files on your phone. You
can enjoy high quality videos and
music.
•
IrDA
Send and receive Phonebook and
Oganiser data and media files via
an infrared port.
•
•
•
WAP browser
Access the wireless web to get
up-to-the-minute information and
a wide variety of media content.
Name card
Create name cards with your
number and profile whenever
introducing yourself to others use
this convenient electronic name
card.
Get personal with photo caller
ID
See who’s calling you with their
very own photo displays.
•
Multimedia Message Service (MMS)
Deliver MMS messages with a combination of
text, images, and audio.
•
E-mail
Deliver e-mails with images, video, and audio
attachments.
•
Java
Enjoy Java™-based embedded
games and download new games.
•
Organiser
Keep track of your daily, weekly,
and monthly schedule.
•
Voice recorder
Record memos or sounds.
Special features of your phone
•
Bluetooth
Send photos, images, videos, and
other personal data, and connect to
other devices using free, wireless
Bluetooth technology.
3
View messages ................................................ 20
Use Bluetooth wireless...................................... 20
Contents
Unpack
6
Make sure you have each item
Your phone
6
14
Begin with your camera, Media player, games, WAP, and
other special features
4
24
Menu functions
28
All menu options listed
Install and charge the phone .............................. 7
Power on or off ................................................. 8
Keys and display ............................................... 9
Access menu functions...................................... 11
Customise your phone ...................................... 12
Make/Answer calls............................................ 14
Use camera .....................................................
Play media files ...............................................
Play games .....................................................
Browse the web ...............................................
Use Contacts ...................................................
Send messages................................................
Call functions
Advanced calling features
7
First steps to operating your phone
Step outside the phone
22
ABC, T9, Number, and Symbol mode
Buttons, features, and locations
Get started
Enter text
14
15
16
17
17
18
Solve problems
77
Help and personal needs
Health and safety information
78
Index
84
Overview of menu functions
To access Menu mode, press [OK] in Idle mode.
1 Call log
p. 28
4 Internet
p. 39
7 Organiser
p. 58
1
2
3
4
5
6
7
8
p.
p.
p.
p.
p.
p.
p.
p.
28
29
29
29
29
29
29
30
1
2
3
4
5
6
p.
p.
p.
p.
p.
p.
5 Messages
p. 41
2 Contacts
p. 30
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
Missed calls
Dialled calls
Received calls
Current contacts
Delete all
Data calls
Calls cost*
Calls time
Search contact
New contact
Groups
Speed dial
My name card
Copy all
Own number
Service number*
Settings
Memory status
30
31
32
32
33
33
33
33
34
34
Go to homepage
Enter URL
Favorites
History
Browser settings
Network settings
Create new
Inbox
Drafts
Outbox
Sent box
Email inbox
Media album**
Templates
Broadcast
Delete all
Settings
Memory status
39
40
40
40
40
40
41
43
45
45
45
46
47
47
47
48
48
51
3 Applications
p. 34
6 File manager
p. 52
1
2
3
4
5
6
p.
p.
p.
p.
p.
p.
Images
Videos
Music
Sounds
Games & More
Other files
Memory card***
p.
p.
p.
p.
p.
p.
p.
SAT*
Medial player
Voice memo
World clock
Calculator
Converter
34
34
36
37
38
38
52
53
55
56
56
57
58
Alarm
Calendar
Week view
Today’s events
Schedule
Anniversary
Task
Memo
Missed event alarm
Memory status
58
59
61
61
61
61
61
61
61
61
8 Camera
p. 62
9 Settings
p. 66
1
2
3
4
5
6
7
8
9
0
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
Profiles
Time & date
Phone
Display
Call
Connectivity
Application settings
Security
Memory status
Reset settings
66
67
67
68
69
71
74
75
76
76
*
Shows only if supported by your USIM/SIM
card.
** Shows only if supported by your service
provider.
*** Shows only if a memory card is inserted
into the phone.
5
Unpack
Your phone
Make sure you have each item
Buttons, features, and locations
Earpiece
Phone
Battery
PC Link CD
Travel Charger
PC Data Cable
User’s Manual
You can obtain various accessories
from your local Samsung dealer.
The items supplied with your
phone and the accessories at
your Samsung dealer may vary,
depending on your country or
service provider.
6
Menu access/
confirm key
Left soft key
Headset jack
Application
switch key
Volume keys
Display
Exterior
camera
lens
Interior
camera lens
Camera
key
External
display
Memory
card slot
Right soft key
Navigation
keys
Video call key
Power On/Off/
Menu exit key
Alphanumeric keys
Dial key
Infrared port
Delete key
Special
function keys
Microphone
Get started
3
Install the battery.
5
Plug the charger into a standard AC wall outlet.
The LED on the charger indicates the charging
progress.
• Red: the battery is being charged.
• Green: the battery is completely charged.
• Orange: the battery is not correctly installed
or is operating at a too high or too low
temperature.
6
When the phone is completely charged (green
charger LED), unplug the charger from the
power outlet.
First steps to operating your phone
4
Plug the travel
charger into the
phone.
USIM/SIM card information
When you subscribe to a cellular network, you
receive a plug-in SIM (Subscriber Identity Module)
card loaded with your subscription details, such as
your PIN and available optional services. For 3G
services, you can purchase a USIM (Universal
Subscriber Identity Module) card.
Install and charge the phone
1
Remove the battery.
If the phone is already
on, first turn it off by
holding [ ].
2
Insert the USIM/SIM
card.
Make sure that the
gold-coloured contacts
on the card face down
into the phone.
7
Get started
7
Remove the charger from the phone.
Power on or off
Power on
1. Open the phone.
2. Press and hold [
on the phone.
] to turn
Do not turn on the
phone when
mobile phone use
is prohibited.
3. If necessary, enter the PIN
and press <Confirm>.
Power off
1. Open the phone.
Low battery indicator
When the battery is low:
• a warning tone sounds,
• the battery low message displays, and
• the empty battery icon
blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
8
2. Press and hold [
].
Keys and display
Key(s)
Key(s)
Description
Deletes characters from the display or
an item in an application.
Perform the function indicated on the
bottom line of the display.
In Idle mode, access menu options
directly. p. 67
In Menu mode, scroll through the
menu options.
Get started
Ends a call.
Hold down to switch the phone on and
off.
In Menu mode, cancel input and
return the phone to Idle mode.
Opens the Media player.
Enter numbers, letters, and some
special characters.
In Idle mode, hold [1] down to access
your voicemail. Hold [0] down to enter
an international call prefix.
In Idle mode, accesses Menu mode.
In Menu mode, select a highlighted
menu option.
Opens the application switch window
to open Call, Messages, and
Internet without exiting the current
application.
Enter special characters.
Hold [ ] down to activate or
deactivate the Silent profile. Hold [ ]
down to enter a pause between
numbers.
Makes a video call.
Makes or answers a call.
In Idle mode, retrieves the recent
number dialled, missed, or received.
Description
(on the left)
(on the right)
Adjust the phone volume.
In Idle mode, adjust the keypad tone
volume. With the phone closed, hold
down to activate the external display.
Hold down to turn on the camera.
In Camera mode, switches the camera
lens.
9
Get started
Display
Layout
Icons
The display has three areas.
Icons
displays various icons.
Text and graphics
displays messages,
instructions, and
information you enter.
Select
Icons
Back
Soft key function
indicators
shows the current
functions assigned to
the two soft keys.
Received signal strength
Accessing services in a 2.5G
network; when transferring
data, this icon animates
Accessing services in a 3G
network; when transferring
data, this icon animates
Active roaming feature
Voice call in progress
Out of your service area; you
cannot send or receive voice
calls
Video call in progress
10
(continued)
Out of your service area; you
cannot send or receive video
calls
Bluetooth feature is active;
when transferring data, this
icon blinks red and blue
p. 71
Connected with a Bluetooth
headset or hands-free kit
IrDA port is active
p. 72
Memory card inserted
Connected with a computer
via a USB port
Browsing the Internet on a PC
using the phone as a modem
Connected to a secured web
page
New message; depending on
the message type, the
following icons may appear.
•
: SMS
•
: MMS or MMS with
attachments
•
: E-mail
•
: Voicemail
•
: WAP push
•
: Configuration message
Icons
(continued)
Profile setting
p. 67
•
: Normal
•
: Meeting
•
: Car
•
: Silent
•
: Outdoor
Battery power level
Access menu functions
Use the soft
keys
The roles of the soft keys vary
depending on the function you are
using. The bottom line of the
display indicates their current
role.
Select
Press the left soft
key to confirm the
function displayed
or option
highlighted.
Get started
Inbox full; depending on the
message type, the following
icons may appear.
•
: SMS
•
: MMS or MMS with
attachments
•
: E-mail
•
: Voicemail
•
: WAP push
•
: Configuration message
Back
Press the right soft
key to move up
one level.
In each main menu, one of the
most popular sub menu is
assigned to the left soft key.
This allows you to quickly
access the most popular
menus.
11
Get started
Select an
option
1. Press the appropriate soft
key or [OK] to access Menu
mode.
2. Press the Navigation keys to
move to the next or previous
option.
3. Press <Select>, <OK>, or
[OK] to confirm the function
displayed or option
highlighted.
4. To exit, choose either of the
following methods:
• Press <Back> to move
up one level.
• Press [ ] to return to
Idle mode.
Use shortcuts
Press the number key
corresponding to the option you
want.
Customise your phone
Display
language
1. In Idle mode, press [OK] and
select Settings → Phone →
Language → Screen text.
2. Select a language.
3. Press <Save>.
Call ringer
melody
You can change the call ringer by
changing the properties of the
currently active sound profile.
To change the profile properties:
1. In Idle mode, press [OK] and
select Settings → Profiles.
2. Scroll the sound profile you
are using.
3. Press <Options> and select
Edit.
4. Select Voice call ringtone
and select a ringer for voice
calls.
5. Press <Select>.
6. Select Video call ringtone
and select a ringer for video
calls.
7. Press <Select>.
8. Press <Options> and select
Save.
12
To change the sound profile:
1. In Idle mode, press [OK] and
select Settings → Profiles.
2. Select the profile you want.
You can set a wallpaper for the
idle screen.
1. In Idle mode, press [OK] and
select Settings → Display →
Wallpaper.
2. Press [Left] or [Right] to
scroll to an image box.
3. Select an image and press
<Set>.
Silent mode
You can quickly activate the
Silent profile to avoid disturbing
other people.
Press and hold [ ] in Idle mode.
You can protect the phone
against unauthorised use with a
phone password. The phone will
require the password on
power-up.
1. In Idle mode, press [OK] and
select Settings → Security
→ Change phone
password.
Get started
Idle mode
Wallpaper
Phone lock
2. Enter the default password,
00000000, and press
<Confirm>.
3. Enter a new 4- to 8-digit
password and press
<Confirm>.
4. Enter the new password
again and press <Confirm>.
5. Select Phone lock.
6. Select Enable.
7. Enter the password and press
<Confirm>.
13
Step outside the phone
Make/Answer calls
Make a call
Step outside the phone
Begin with your camera, Media player, games, WAP, and
other special features
To make a voice call:
1. Enter an area code and
phone number.
2. Press [
Use camera
].
3. To end the call, press [
].
Take a photo
To make a video call:
Answer a call
1. Enter an area code and
phone number.
2. Press [ ] to switch between
the interior lens and exterior
lens.
2. Press [ ], and the other
person appears on the
screen.
3. Aim the camera lens at the
subject and adjust the image.
3. To end the call, press [
14
4. Press [OK] to take a photo.
The photo is saved
automatically.
1. When the phone is ringing,
press [ ].
2. For a video call, press
<Show me> to allow the
other person to see you.
Adjust the
volume during
a call
1. In Idle mode, press and hold
[ ] to turn on the camera.
Press [ / ].
].
5. Press [OK] to take another
photo.
View a photo
1. In Idle mode, press [OK] and
select File manager →
Images.
2. Select the photo you want.
Record a video
1. In Idle mode, press and hold
[ ] to turn on the camera.
2. Press [1] to switch to Record
mode.
Play media files
Use these methods:
• Download from the wireless
web
p. 39
• Download from a computer
using Samsung PC Studio
Samsung PC Studio User’s
Guide
• Copy files to a memory card
and insert the card into the
phone.
• Receive via IrDA or
p. 72, p. 71
Bluetooth
Create a play
list
1. In Idle mode, press [
3. Press [ ] to switch between
the interior lens and exterior
lens.
4. Press [OK] to start recording.
5. Press [OK] to stop recording.
The video is automatically
saved.
6. Press [OK] to record another
video.
Play a video
1. In Idle mode, press [OK] and
select File manager →
Videos.
2. Select the video you want.
Step outside the phone
Copy media
files to the
phone
].
2. Press <Options> and select
Open play list.
3. Press <Options> and select
Add → Folder or Files.
4. Press [OK] to check the files
you want or scroll to the
folder you want.
5. Press <Add> or <Select>.
6. Press [OK] to start playing
the files.
15
Step outside the phone
Play media files
1. From the Media player
screen, press [OK].
2. Press [OK] to start playing.
3. During playback, use the
following keys:
• OK: Pauses or resumes
playback.
• Up: Opens the play list.
• Left: Goes to the previous
file. Moves backward in a
file when held down.
• Right: Skips to the next
file. Skips forward in a file
when held down.
•
/ : Adjusts the volume.
• Down: Stops playback.
Play games
Select a game
1. In Idle mode, press [OK] and
select File manager →
Games & More → the game
you want.
2. Press any key, except for
[ ], to launch the game.
Play
Powerinlinex
1. Select PLAY.
2. Select a character.
3. Press <OK> to start a game.
4. Press [Up] to make the
character move forward.
5. Press the Navigation keys to
change the direction.
Play
TheLastAge
1. Select START GAME.
2. Select New Game.
3. Press <SKIP>, then <OK>.
4. Press [Up] to make the
machine move forward.
5. Press the Navigation keys to
change the direction.
16
Browse the web
Use Contacts
Using a built-in WAP (Wireless Application Protocol)
browser, you can get easy access to the wireless
web to receive a variety of up-to-date information
and services and to enjoy downloads of web
contents.
In Idle mode, press [OK] and
select Internet → Go to
homepage.
Navigate the
web
•
•
•
•
To scroll through browser
items, press [Up] or [Down].
To select an item, press [OK].
To return to the previous
page, press <Back>.
To use browser options, press
<Options>.
To the phone’s memory:
1. In Idle mode, enter a phone
number.
2. Press <Options> and select
Save to Contacts → Phone
→ New → a number type.
Step outside the phone
Launch the
browser
Add an entry
3. Specify the contact
information: First name, Last
name, Work email, Home
email, Group, Homepage,
Birthday, and More
information (Job title,
Department, Company,
Nickname, and Notes).
4. Press <Options> and select
Save to save the entry.
To the USIM/SIM card:
1. In Idle mode, enter a phone
number.
2. Press <Options> and select
Save to Contacts → SIM →
New.
17
Step outside the phone
3. Specify the contact
information, depending on
your card type: Name, Email,
Group, and Location number.
4. Press <Save> to save the
entry.
Find an entry
Send messages
1. In Idle mode, press <Msg.>
Send a text
and select Create new →
message (SMS)
Text message.
2. Enter the message text.
3. Press [OK].
4. Enter destination numbers.
1. In Idle mode, press
<Contacts>.
5. Press [OK] to send the
message.
2. Select an entry.
3. Select a number and press
[ ] to dial, or [OK] to edit
the contact information.
Create and
send your
name card
1. In Idle mode, press [OK] and
select Contacts → My name
card.
2. Specify your contact
information.
3. Press <Options> and select
Save to save the name card.
18
Send a
multimedia
message
(MMS)
1. In Idle mode, press <Msg.>
and select Create new →
Multimedia message.
2. Enter the message subject.
3. Select Text.
4. Enter the message text and
press [OK].
5. Select Picture or video or
Audio.
6. Add a media file.
4. To send the name card to
other people, access the My
name card menu again.
7. Press [OK].
5. Press <Options> and select
Send name card → the
sending method you want.
9. Press [OK] to send the
message.
8. Enter destination numbers or
e-mail addresses.
Send flies by
MMS
1. In Idle mode, press <Msg.>
and select Create new →
File messenger.
Send an e-mail
1. In Idle mode, press <Msg.>
and select Create new →
Email.
2. Enter the e-mail subject.
3. Move to the Message field.
3. Move to the Message field.
4. Enter the message text.
4. Enter the e-mail text.
5. Move to the Attach files line.
5. Move to the Attach files line.
6. Press <Options> and select
Add files, Add name card,
or Add v-calendar.
6. Press <Options> and select
Add files, Add name card,
or Add v-calendar.
7. Select images, videos,
sounds, name cards,
schedule items, or tasks.
7. Select images, videos,
sounds, name cards,
schedule items, or tasks.
8. Press <Options> and select
Attach.
8. Press <Options> and select
Attach.
9. Press [OK].
9. Press [OK].
10. Enter destination numbers or
e-mail addresses.
10. Enter e-mail addresses.
11. Press [OK] to send the
message.
Step outside the phone
2. Enter the message subject.
11. Press [OK] to send the
e-mail.
19
Step outside the phone
View messages
View text
message
When a notification appears:
View an e-mail
2. Press <Options> and select
Download.
1. Press <View>.
2. Select the message from the
Inbox.
3. Select an e-mail or header.
4. If you selected a header,
press <Options> and select
Retrieve.
From the Inbox:
1. In Idle mode, press <Msg.>
and select Inbox.
2. Select an SMS message
(
).
View a
multimedia
message
When a notification appears:
1. Press <View>.
2. Press <Options> and select
Retrieve.
3. Select the message from the
Inbox.
Use Bluetooth wireless
Your phone is equipped with Bluetooth technology
which enables you to connect the phone wirelessly
to other Bluetooth devices and exchange data with
them, talk hands-free, or control the phone
remotely.
Turn on
Bluetooth
From the Inbox:
1. In Idle mode, press <Msg.>
and select Inbox.
2. Select an MMS message
(
).
1. In Idle mode, press <Msg.>
and select Email inbox.
Search for and
pair with a
Bluetooth
device
In Idle mode, press [OK] and
select Settings → Connectivity
→ Bluetooth → Activation →
On.
1. In Idle mode, press [OK] and
select Settings →
Connectivity → Bluetooth →
My devices → Search new
device.
2. Select a device.
20
Send data
Step outside the phone
3. Enter a Bluetooth PIN code or
the other device’s Bluetooth
PIN code, if it has, and press
<OK>.
When the owner of the other
device enters the same code,
the pairing is complete.
1. Access an application,
Contacts, File manager, or
Organiser.
2. Select the item you want to
send.
3. Press <Options> and select
Send (name card/
schedule/task) → Via
bluetooth.
4. Select a device.
5. If necessary, enter the
Bluetooth PIN and press
<OK>.
Receive data
To receive data via Bluetooth,
your phone’s Bluetooth feature
must be active.
If necessary, press <Yes> to
confirm the reception.
21
Enter text
ABC, T9, Number, and Symbol mode
You can enter text for some features such as
Messages, Phonebook, or Organiser, using ABC
mode, T9 mode, Number mode, and Symbol mode.
Changing the text input mode
The text input mode indicator displays when the
cursor is in a text input field.
• Press and hold [ ] to switch between T9 (
)
and ABC (
) modes.
• Press [ ] to change case (
/
/
) or
to switch to Number mode (
).
• Press and hold [ ] to switch to Symbol mode
(
).
Using T9 mode
T9 is a predictive text input mode that allows you to
key in any character using single keystrokes.
Entering a word in T9 mode
1. Press [2] to [9] to start entering a word. Press
each key once for each letter.
For example, press [4], [3], [5], [5], and [6] to
enter Hello in T9 mode.
T9 predicts the word that you are typing, and it
may change with each key that you press.
22
2. Enter the whole word before editing or deleting
characters.
3. When the word displays correctly, go to step 4.
Otherwise, press [0] to display alternative word
choices for the keys that you have pressed.
For example, Of and Me use [6] and [3].
4. Press [ ] to insert a space and enter the next
word.
Tips for using T9 mode
•
•
•
Press [1] to enter periods or apostrophes
automatically.
Press the Navigation keys to move the cursor.
Press [C] to delete characters one by one. Press
and hold [C] to clear the entire display.
Adding a new word to the T9 dictionary
This feature may not be available for some
languages.
1. Enter the word that you want to add.
2. Press [0] to display alternative words for your
key presses. When there are no more alternative
words, Spell displays on the bottom line.
3. Press <Spell>.
4. Enter the word you want using ABC mode and
press <Add>.
Using ABC mode
Using Number mode
Press the appropriate key until the character you
want appears on the screen.
Number mode enables you to enter numbers. Press
the keys corresponding to the digits you want.
Key
Characters in order displayed
Upper case
Lower case
Using Symbol mode
To
Enter text
Symbol mode enables you to insert symbols.
Press
display more symbols
[Up] or [Down].
select a symbol
the corresponding
number key.
clear the symbol(s)
[C].
insert the symbol(s)
<OK>.
Tips for using ABC mode
•
•
•
•
To enter the same letter twice or to enter a
different letter on the same key, wait for the
cursor to move to the right automatically or
press [Right]. Then, enter the next letter.
Press [ ] to insert a space.
Press the Navigation keys to move the cursor.
Press [C] to delete characters one by one. Press
and hold [C] to clear the entire display.
23
Call functions
Advanced calling features
Making a call
1. In Idle mode, enter the area code and phone
number.
2. Press [ ].
• Press [C] to clear the last digit or press and
hold [C] to clear the whole display. You can
move the cursor to edit an incorrect digit.
• Press and hold [ ] to enter a pause between
numbers.
Making an international call
Dialling a number from the USIM/SIM card
1. In Idle mode, enter the location number for the
phone number you want and press [ ].
2. Find the number you want.
3. Press <Call> or [ ] to make a voice call, or
<V-Call> to make a video call to the number.
Ending a call
Press [
] or close the phone.
Answering a call
1. In Idle mode, press and hold [0]. The +
character appears.
2. Enter the country code, area code, and phone
number, then press [ ].
When you receive an incoming call, the phone rings
and displays the incoming call image.
Redialling recent numbers
•
1. In Idle mode, press [ ] to display the list of
recent numbers.
2. Scroll to the number you want and press [ ].
Making a call from Contacts
Once you have stored a number in Phonebook, you
can dial the number by selecting it from
Phonebook.
p. 30
24
You can also use the speed dial feature to assign
your most frequently called numbers to specific
number keys.
p. 32
Press [
] or <Accept> to answer the call.
Tips for answering a call
•
•
•
When Anykey answer is active, you can press
any key to answer a call, except for [ ] and
<Reject>.
p. 68
When Active folder is active, you can answer a
call by opening the phone.
p. 68
Press <Reject> or [ ] to reject a call.
Press and hold [ / ] to reject an incoming call
or mute the ringer, depending on the Side key
setting.
p. 68
Viewing missed calls
Placing a call on hold/Retrieving
If you have missed calls, the screen displays how
many calls you have missed.
1. Press <View>.
2. If necessary, scroll through the missed calls.
3. Press [ ] to dial the number you want.
Press <Hold> or <Unhold> to place the call on
hold or retrieve the call.
Use the headset to make or answer calls without
holding the phone.
Connect the headset to the jack on the left side of
the phone.
The button on the headset work as listed below:
To
Press
redial the last call
the button twice.
answer a call
the button.
end a call
and hold the button.
Options during a call
You can access a number of functions during a call.
Adjusting the volume during a call
You can make another call if your network supports
it.
1. Press <Hold> to put the call on hold.
2. Make the second call in the normal way.
3. Press <Swap> to switch between the calls.
4. Press <Options> and select Drop → Drop held
call to end the call on hold.
5. To end the current call, press [ ].
Call functions
Using the headset
Making a second call
Answering a second call
You can answer an incoming call while already on
the phone, if your network supports it and you have
activated the call waiting feature.
p. 70
1. Press [ ] to answer the call. The first call is
automatically put on hold.
2. Press <Swap> to switch between the calls.
3. Press <Options> and select Drop → Drop held
call to end the call on hold.
4. To end the current call, press [ ].
Use [ / ] to adjust the earpiece volume during a
call.
Press [ ] to increase the volume level and [ ] to
decrease the volume level.
25
Call functions
Transferring a call
Muting or sending key tones
You can transfer the currently active call to a caller
on hold, if your network supports it. With this
option, the two callers can talk to each other, but
you are disconnected from the call.
You can turn the key tones off or on.
Press <Options> and select Transfer.
Using the loudspeaker feature
To communicate with answering machines or
computerised telephone systems, Unmute key
tone must be selected.
Use the speaker to talk and listen with the phone a
short distance away. Press <Options> and select
Loudspeaker, or press [OK].
Using Phonebook
Using a Bluetooth headset
Press <Options> and select Contacts.
Use an optional Bluetooth headset to talk on the
phone without holding the phone to your ear. To use
this feature, you first need to register your headset
and connect it to the phone.
p. 71
You can access the Contacts menu to locate or
store contacts in Phonebook.
p. 30
Sending an SMS message
You can create and send an SMS message to other
people as well as to your current call participants.
Press <Options> and select Switch to headset. To
switch the call back to the phone, press <Options>
and select Switch to phone.
Press <Options> and select Send text message.
p. 41
Switching off the microphone (Mute mode)
Dual tone multi-frequency (DTMF) tones are the
tones used in phones for tone dialling.
You can temporarily switch off your phone’s
microphone so that the person on the phone cannot
hear you.
Press <Options> and select Mute. To turn the
microphone back on, press <Options> and select
Unmute.
26
Press <Options> and select Mute key tone or
Unmute key tone.
Sending a sequence of DTMF tones
You can send DTMF tones as a group after entering
the entire number you need to send or retrieving a
number from Phonebook. This feature is helpful for
entering a password or an account number when
you call an automated system, like a banking
service.
1. When connected with a teleservice system, press
<Options> and select Send DTMF.
2. Enter the number you need to send and press
<Send>.
Adding a memo
Press <Options> and select Memo.
p. 60
Disconnecting one participant
Your service provider must support multi-party calls
for you to use this feature.
1. Press <Options> and select Drop call.
2. Select a name or number from the participant
list.
The participant is disconnected from the call, but
the call continues with the other parties.
3. Press [ ] to end the multiparty call.
Setting up a multi-party call
Using the video call feature
Making a multi-party call
Use this feature to allow as many as six people to
join a multi-party call, or conference call.
1. Call the first participant.
2. Call the second participant. The first call is
automatically put on hold.
3. Press <Options> and select Join. The first
participant is added to the multi-party call.
4. If desired, call another person or answer an
incoming call.
5. Press <Options> and select Join.
6. Repeat steps 4 and 5 as desired.
Having a private conversation with one
participant
1. Press <Options> and select Split.
Call functions
You can add a memo during a call.
2. Select a name or number from the participant
list.
You can talk privately with that person, while the
other participants converse with each other.
3. To return to the multi-party call, press
<Options> and select Join.
In a 3G (UMTS) service area, your phone can make
or receive a video call which allows you to see
another person on the screen during a conversation.
The other person’s phone must support the video
call feature.
Making a video call
1. In Idle mode, enter the area code and phone
number.
2. Press [ ].
Answering a video call
When you receive a video call, answer a video call as
receiving a voice call. Press <Show me> to allow
the caller to see you.
27
Using video call options
During a video call, press <Options> to access the
following options:
• Loudspeaker/Loudspeaker off: turns the
loudspeaker on or off.
• Switch to headset/Switch to phone: switch
the call to a Bluetooth headset or back to the
phone.
• Mute camera: turn the camera off.
• Mute voice: turn the microphone off.
• Mute camera & voice: turn the camera and the
microphone off.
• Mute key tone: turn the key tones off.
• Zoom: display the zoom control bar.
• Brightness: display the brightness control bar.
• Effects: change the colour tone of the image.
• Hide information/Show information: hide or
display information about the video call.
• Send DTMF: send dual tone multi-frequency
(DTMF) tones as a group after entering the entire
number you need to send or retrieving a number
from Phonebook.
• Video quality: change the image quality of the
camera.
• End call: end the video call.
28
Menu functions
All menu options listed
Call log
(OK 1)
The Call log menu enables you to view the calls you
have dialled, received, or missed, the length of your
calls, and the cost of your calls.
To access this menu, press [OK] in Idle mode and
select Call log.
Missed calls (OK 1.1)
This menu displays the most recently received calls
that you did not answer.
Accessing a call record
1. Scroll to the name or number you want. The call
list also shows the number of call repetition.
2. Press [ ] to dial the number, or [OK] to view
the details of a call.
Using call record options
While viewing the call list, press <Options> to
access the following options:
• Details: access information about the selected
call record.
• Voice call: place a voice call.
• Video call: place a video call.
•
•
•
Dialled calls (OK 1.2)
This menu displays the most recent calls you have
dialled.
This menu displays the most recent calls you have
received.
Current contacts (OK 1.4)
This menu displays all of the calls you have dialled,
received, or missed.
Delete all (OK 1.5)
Use this menu to delete all of the records in each call
type.
1. Press [OK] to check the call type(s) to clear.
2. Press <Delete>.
3. Press <Yes> to confirm the deletion.
Use this menu to view the total amount of sent or
received data.
To reset a counter or all of the counters, press
<Options> and select Reset or Reset all.
Calls cost (OK 1.7)
This network feature displays the cost of calls. This
menu is available only if your USIM/SIM card
supports this feature. Note that this is not intended
to be used for billing purposes.
• Total costs: check the total cost of all your
calls. If the total cost exceeds the maximum cost
set in Edit cost limit, you must reset the
counter before you can make another call.
• Last call cost: check the cost of your last call.
• Max cost: check the maximum cost set.
Call log (OK 1)
Received calls (OK 1.3)
Data calls (OK 1.6)
Menu functions
•
•
Use number: paste the selected number to the
normal dialling screen.
Save to Contacts: save the selected number in
Phonebook.
Send message: send a message to the selected
number using SMS, MMS, or file messenger.
Delete: delete the call record.
Delete all: delete all records.
Press <Options> to access the following options:
• Reset call cost: reset the cost counters.
• Edit cost limit: set the maximum cost
authorised for your calls.
• Setup currency: set the price per unit that is
applied when the cost of your call is calculated.
29
Menu functions
Calls time (OK 1.8)
Contacts
This menu displays the time log for voice and video
calls made and received. The actual time invoiced by
your service provider will vary.
•
Total dialled: check the total length of voice
calls dialled.
•
Total received: check the total length of
voice calls received.
•
Total dialled: check the total length of video
calls dialled.
•
Total received: check the total length of
video calls received.
You can store phone numbers on your USIM/SIM
card and in your phone’s memory. The USIM/SIM
card and phone’s memory are physically separate,
but they are used as a single entity called
Phonebook. In the Contacts menu, you can manage
your Phonebook entries.
To reset a counter or all of the counters, press
<Options> and select Reset or Reset all.
(OK 2)
To access this menu, press [OK] in Idle mode and
select Contacts.
Search contact (OK 2.1)
Use this menu to search for numbers in Phonebook.
You can quickly access this menu by pressing
<Contacts> in Idle mode.
Finding an entry
1. Enter the first few letters of the name that you
want to find.
2. Select the name you want from the list.
3. Press [ ] to dial the number, or [OK] to edit the
contact information.
Using contact options
While viewing the contact list, press <Options> to
access the following options:
• Details: access detailed information about the
currently selected contact.
• Edit: edit the contact information.
• Video call: make a video call.
30
•
•
•
•
•
New: add a new contact.
Delete: delete the selected contact.
Search groups: access the caller group list.
Service number: access service numbers
preset by your service provider.
Delete all: delete all contacts.
Use this menu to add a new contact to Phonebook.
Storing a number in the phone’s memory
1. Select Phone.
2. Change the settings or enter information about
the contact.
• First name/Last name: assign a name.
• Phone number: add a mobile phone
number.
• Work email: assign a business e-mail
address.
• Home email: assign a personal e-mail
address.
• Group: assign a caller group.
• Homepage: enter a homepage address.
• Birthday: enter the person’s birthday.
• More information: enter the job title,
department, company, nickname, and
additional note about the person.
3. Press <Options> and access the following
options to add additional information:
• Special options: assign a caller ID image,
call ringer, or message ringer for the contact.
• Add phone number: add a number
category to the contact.
• Delete phone number: remove the
selected number category from the contact
entry.
Menu functions
Contacts (OK 2)
While viewing details of a contact, press <Options>
to access the following options:
• Edit: edit the contact information.
• Send message: send a message to the selected
number using SMS, MMS, or file messenger.
• Special options: set the following options:
Picture: assign a caller ID image to alert you to
a call from the person.
Ringtone: assign a ringer melody to alert you to
a call from the person.
Msg. alert tone: select a tone to alert you to an
incoming message from the person.
• Add to speed dial: set the selected number as
a speed dial number.
• Video call: make a video call.
• Copy to SIM/Copy to phone: copy the selected
contact to the phone’s memory or USIM/SIM
card or vice versa.
• Send name card: send the contact via SMS, email, file messenger, Bluetooth, or infrared port.
• Use number: paste the number to the normal
dialling screen.
• Delete: delete the contact.
New contact (OK 2.2)
31
Menu functions
•
Change type: change the type of the
selected number.
• Mark video call/Unmark video call: set
the selected number as a video call number.
4. Press <Options> and select Save.
Storing a number on the USIM/SIM card
1. Select SIM.
2. Press [Down] and change the settings or enter
information about the contact.
• Name: assign a name.
• Phone number: add a mobile phone
number.
• Email: (for USIM) assign an e-mail address.
• Group: (for USIM) assign a caller group.
• Location number: enter a location number.
When you are using a USIM card, press
<Options> and select Add item to enter
additional numbers.
3. Press <Save>.
Groups (OK 2.3)
Use this menu to organise your contacts in caller
groups.
Adding members to a caller group
1. Select a group.
2. Press [OK] to check the contacts you want.
3. Press <Save>.
32
Managing caller groups
From the group list, press <Options> to access the
following options:
• View members: display the members of the
select group.
• Add member: add contacts to the selected
group.
• Add group: add a new group.
• Rename group: change the group name.
• Delete group: delete the selected group.
• Delete all groups: delete all groups, including
the default groups.
Speed dial (OK 2.4)
Use this menu to assign speed dial numbers (2 to 9)
to eight of your most frequently called numbers.
Assigning speed dial entries
1. Select a key location from 2 to 9. Key 1 is
reserved for your voicemail server.
2. Select the contact you want from the contact list.
3. Scroll to a number, if the contact has more than
one number.
4. Press <Select>.
Managing speed dial entries
Press and hold the appropriate key in Idle mode.
My name card (OK 2.5)
Use this menu to create your name card and send it
to other people.
Saving your name card
The procedure for creating your name card is the
same as the one for saving a number in the phone’s
memory.
p. 31
Using name card options
•
Send name card: send the name card via SMS,
e-mail, file messenger, Bluetooth, or infrared
port.
Delete: delete the name card.
Copy all (OK 2.6)
Use this menu to copy all of the contacts stored on
the USIM/SIM card to the phone’s memory, or vice
versa.
Own number (OK 2.7)
Use this feature to check your phone numbers, or to
assign a name to each of the numbers. Changes
made here do not affect the actual subscriber
numbers on your USIM/SIM card.
Contacts (OK 2)
Dialling speed dial entries
•
Menu functions
While viewing the Speed dial screen, press
<Options> to access the following options:
• Add: assign a number to an unassigned key.
• Details: display details about the speed dial
entry.
• Video call: make a video call.
• Change: assign a different number to an
assigned key.
• Remove: clear the speed dial setting for the
selected key.
Service number (OK 2.8)
This menu is available if your USIM/SIM card
supports Service Dialling Numbers (SDN). Use this
menu to view the list of SDNs assigned by your
service provider, including emergency numbers,
directory enquiries, and voicemail numbers.
1. Scroll to the number you want.
2. Press <Dial> or [ ].
After saving your name card, press <Options> to
access the following options:
• Edit: edit the name card.
33
Menu functions
Settings (OK 2.9)
Applications
Use this menu to change the default settings for
Phonebook.
• Viewing settings: select whether the contact
list is sorted by last name or by first name.
• Default storage settings: select a default
memory location to save contacts. If you select
Optionally, the phone will ask you to select a
memory location when saving a number.
Use this menu to play media files, to record a voice
memo, to set time zones, or to use the phone as a
calculator or converter.
Memory status (OK 2.0)
Use this menu to view the number of contacts you
have stored and total number of contacts you can
store in Phonebook.
(OK 3)
To access this menu, press [OK] in Idle mode and
select Applications.
SAT (OK 3.1)
This menu is available if you use a USIM/SIM card
that supports SIM Application Toolkit menus and
provides additional services, such as news, weather,
sports, entertainment, and location services.
Available services may vary, depending on your
service provider’s plans.
For details, see your USIM/SIM card instructions or
contact your service provider.
Media player (OK 3.2)
Use this menu to enjoy media files, such as video
clips and music files. You can also play streaming
contents.
You can quickly access the Media player by
pressing [
] in Idle mode.
Downloading or receiving media files
Use this method to save media files to your phone:
p. 39
• Download from the wireless web
• Download from a computer using Samsung PC
Studio
Samsung PC Studio User’s Guide
34
•
•
Receive via IrDA or Bluetooth
p. 72, p. 71
Copy files to a memory card and insert the card
into the phone
Creating the play list
1. From the Media player screen, press [OK].
2. Select a file. The file plays.
During playback, you can use the following keys:
Key
Function
OK
Pauses or resumes playback.
Left
Goes to the previous file. Moves backward
in a file when held down.
Right
Skips to the next file. Skips forward in a
file when held down.
Up
Opens the play list.
Adjusts the volume.
Stops playback.
Using Media player options
From the Media player screen during playback, press
<Options> to access the following options:
• Pause/Resume: pause or resume playback.
• Stop: stop playback.
• Send: send the selected file via MMS, e-mail, file
messenger, Bluetooth, infrared port, or online
album, if provided.
• Open play list: display the play list.
• Activate key: get a new license key when the
key for the selected DRM file expires.
• Reactivate key: get another key even when the
key for the selected DRM file has not expired.
• Go to file Manger: go to the media file list.
• Hidden from bluetooth: hide the file so that
other Bluetooth devices cannot access it.
• Visible to bluetooth: share the file with other
Bluetooth devices.
• Show controller/Hide controller: display or
hide the control bar of the Media player.
• Details: access the file properties.
Applications (OK 3)
Playing media files
/
Down
Function
Menu functions
Add the media files to the play list so you can play
them.
1. From the Media player screen, press [OK].
2. Press <Options> and select Add.
3. Select Folder or Files.
4. Press [OK] to check the files you want, or scroll
to the folder you want.
5. Press <Add> or <Select>.
6. To play files, press [OK].
Key
35
Menu functions
•
•
•
Player settings: change the default settings for
playing media files.
Play options: select a repeat mode.
Volume: select a volume level.
Controller: display the control bar of the Media
player.
Audio player skin: select a skin image.
VOD settings: select a connection profile to be
used for accessing a video streaming server. You
can also make or edit a profile.
p. 73
Key management: manage the licence keys
you have acquired.
Using play list options
From the Media player screen, press [Up] to access
the play list and press <Options> to access the
following options:
• Play: play the currently selected file.
• Add: add files or a folder to the play list.
• Remove: remove the selected file or all of the
files from the play list.
• Move: move the selected file to the position you
want within the current play list or another play
list.
• Copy: make a copy of the selected file in the
current play list or another play list.
• Delete list: delete the current play list.
• Rename list: change the name of the play list.
• New list: add a new play list.
36
Voice memo (OK 3.3)
Use this menu to record voice memos.
Recording a voice memo
1. Press [OK] to start recording.
2. Speak into the microphone.
Press [OK] to pause or resume the recording.
3. When you finish, press <Stop>. The voice
memo is automatically saved.
Playing a voice memo
1. From the voice recorder screen, press
<Options> and select Go to sounds.
2. Select the Voice memos folder.
3. Select a voice memo. The memo plays.
On the player screen, you can use the following
keys:
Key
Function
OK
Pauses or resumes playback.
Up
Switches to Play mode (
Record mode ( ).
Left
Moves backward.
Right
/
Down
Skips forward.
Adjusts the volume.
Stops playback.
) or back to
Using voice memo options
World clock (OK 3.4)
From the player screen, press <Options> to access
the following options:
• Play: play the voice memo.
• Resume: resume playback.
• Stop: stop playback.
• Record: record a new voice memo.
• Send: send the selected file via MMS, e-mail, file
messenger, Bluetooth, or infrared port.
• Go to sounds: go to the Sounds folder.
• Rename: change the name of the file.
• Delete: delete the selected file.
• Hidden from bluetooth: hide the file so that
other Bluetooth devices cannot access it.
• Visible to bluetooth: share the file with other
Bluetooth devices.
• Details: access the file properties.
• Record settings: change the default settings
for recording a voice memo.
Default name: change the default prefix of the
voice memo.
Recording time: select a maximum recording
time.
Use this menu to set your local time zone and find
out what time it is in another part of the world.
Setting your local time zone
Menu functions
1. From the world map, press [Left] or [Right] to
select the city that corresponds to your home
time zone. As the time line moves, the time and
date of the given zone display.
2. Press [OK] to save the time zone.
Viewing and setting a foreign time zone
Applications (OK 3)
1. From the world map, press [Down].
2. Press [Left] or [Right] to select the foreign time
zone you want to view.
3. Press [OK] to save the time zone.
Applying Daylight Savings Time
1. From the world map, press <Options> and
select Summer time.
2. Press [OK] to check the time zone(s) you want.
3. Press <Select>.
4. Press <Options> and select Save.
37
Menu functions
Calculator (OK 3.5)
Converter (OK 3.6)
Use this menu to perform basic arithmetic functions
such as addition, subtraction, multiplication, and
division.
Use this menu for common conversions, such as
currency and temperature.
Preforming a calculation
1. Select the converter type you want.
2. Press [Left] or [Right] to select the original unit
and press [Down].
3. Enter the value to be converted.
• Press [ ] to insert a decimal point.
• Press [ ] to change the temperature to
above zero (+) or below zero (-).
4. Press [Down].
5. Press [Left] or [Right] to select the unit you want
to convert to.
The equivalent value for the amount you entered
displays.
1. Enter the first number.
Press [ ] to include a decimal point.
2. Enter the operation for your calculation by
pressing the Navigation keys.
3. Enter the second number.
4. Press [OK] to view the result.
Using calculator options
Press <Options> to access the following options:
• Equal: view the result.
• Recent calculation: display the last result you
calculated.
• Save to memory: save a value into the
calculator memory.
• Recall memory: retrieve the saved value.
• Clear memory: clear the saved values.
38
Preforming a conversion
Using converter options
Press <Options> to access the following options:
• Clear: clear the current values.
• Reverse: reverse the conversion.
• Currency rates: edit the currency rate list.
Internet
•
(OK 4)
•
•
•
•
•
Go to homepage (OK 4.1)
•
Selecting this menu connects your phone to the
network and loads the homepage of the wireless
web service provider.
•
Navigating the WAP browser
In the WAP browser:
To
Press
scroll through browser items
[Up] or [Down].
select a browser item
<Select> or [OK].
return to the previous page
<Back>.
Using WAP page options
From any WAP page, press <Options> to access
the following browser options:
• Go to homepage: send you back to the
homepage.
Internet (OK 4)
To access this menu, press [OK] in Idle mode and
select Internet.
Enter URL: manually enter the URL address of
the web page you want to access.
Reload: reload the current page with updated
information.
Add favorite: add the current page to your
bookmark list.
Favorites: access the bookmark list.
History: show URLs previously visited.
Send link: send the URL via SMS, e-mail, or file
messenger.
Save: save the image of the current WAP page
or the current page.
Advanced: clear browser information and
access the browser settings.
Search text: search for a specific word or
phrase from the current WAP page.
Clear history: delete the URLs stored in the
history.
Clear cookies: delete cookies.
Clear cache: delete information stored in the
cache.
Details: access information about the current
page.
Browser settings: change the settings for the
browser display, security, and certificates.
Network settings: select a connection profile
to be used for connecting to the Internet. You
can also make or edit a profile.
p. 73
Menu functions
The Wireless Application Protocol (WAP) browser on
your phone allows you to access the wireless web.
Using the WAP browser, you can access up-to-theminute information and a wide variety of media
contents, such as wallpapers, ringtones, and music
files.
39
Menu functions
About: access version and copyright information
of the WAP browser.
Exiting the WAP browser
Press [
] to exit the browser.
Enter URL (OK 4.2)
You can enter the URL of a WAP page in order to
quickly access the page.
Favorites (OK 4.3)
You can add and manage the URLs of the WAP pages
you frequently access as bookmarked items. You can
also manage URLs you have bookmarked while
navigating the Internet.
Adding a new bookmark
1. Press <New> and select Favorite.
If the saved bookmark items already exists,
press <Options> and select New → Favorite.
2. Enter a URL and press [OK].
3. Enter a name for the item and press <OK>.
4. Press [OK] to save the item.
Using bookmark options
From the bookmark list, press <Options> to access
the following options:
• Open: open the selected folder.
40
•
•
•
•
•
•
•
•
Select: access the page of the selected
bookmark.
Details: access the details of the bookmark.
Send link: send the bookmark via SMS, e-mail,
or file messenger.
New: add a new bookmark or folder.
Edit: change the selected bookmark.
Move: move the bookmark to another folder.
Rename: change the folder name.
Delete: delete the selected bookmark or all
bookmarks.
History (OK 4.4)
You can access the list of pages you have accessed
recently.
Browser settings (OK 4.5)
You can customise the various settings for the
browser display, security, certificates.
Network settings (OK 4.6)
You can select a connection profile to be used for
accessing the Internet. You can also make or edit a
profile.
p. 73
Messages
(OK 5)
Use the Messages menu to send and receive short
text messages, multimedia messages, and e-mails.
You can also use WAP push message, voicemail, and
cell broadcast message features.
Create new (OK 5.1)
Use this menu to create and send text messages,
multimedia messages, or e-mails. You can also send
files using MMS.
Short Message Service (SMS) allows you to send or
receive text messages.
The maximum number of characters allowed in a
short message varies by your service provider. If
your message exceeds the maximum number of
characters, the phone will split the message.
1. Enter your message.
Press <Options> and select Insert to retrieve a
text template, contact entry, or bookmark.
2. Press [OK].
3. Enter a destination number.
To send the message to more than one recipient,
press [Down] and fill in additional destination
fields.
Multimedia Message Service (MMS) delivers
messages containing a combination of text, image,
video, and audio, from phone to phone or from
phone to e-mail.
1. Enter the message subject.
2. Select the Text line.
3. Enter the message text and press [OK].
4. Select the Picture or video or Audio line.
5. Select an image or audio file, press <Add>.
The maximum size allowed for an MMS
message can differ depending on the country.
If you cannot attach another file, add a new
page.
Messages (OK 5)
Text message (OK 5.1.1)
Multimedia message (OK 5.1.2)
Menu functions
To access this menu, press [OK] in Idle mode and
select Messages, or press <Msg.> in Idle mode.
4. Press [OK] to send the message.
6. Press <Options> to access the following
options:
• Preview: display the message you created.
• Edit text/Change file: edit the added text,
picture, or sound clip.
• Delete text/Delete file: delete the added
text, picture, or sound clip.
• Save to Drafts: save the message in the
Drafts box.
• Add page: add a page. Move to each page
by pressing [Left] or [Right] on the message
screen.
41
Menu functions
•
Move page: move the current page to the
next or previous page.
• Delete page: delete the added page.
• Edit style: change the page properties.
This page: set the page duration and
change the font colour and style for the
selected page.
All page: change the background colour and
page layout.
• Save as template: save the message as a
template in the Multimedia templates
folder.
7. When you have finished, press [OK].
8. Enter a phone number or e-mail address.
To send the message to more than one recipient,
press [Down] and fill in additional destination
fields.
9. Press [OK] to send the message.
5. Press <Options> and select Attach.
6. Press <Options> to access the following
options:
• Attached file list: display the file list you
attached.
• Add name card: add a contact as a Vcard
format.
• Add v-calendar: add a calendar memo.
• Delete all attachments: delete all of the
attached files.
• Save to Drafts: save the message in the
Drafts box.
7. When you have finished, press [OK].
8. Enter a phone number or e-mail address.
To send the message to more than one recipient,
press [Down] and fill in additional destination
fields.
9. Press [OK] to send the message.
File messenger (OK 5.1.3)
Email (OK 5.1.4)
Use this menu to send multiple media files by
attaching them to an MMS message.
1. Enter the message subject in the Subject line.
2. Move to the Message field and enter the
message text.
3. Select the Attach files line.
4. Press [OK] to check the files you want.
42
You can send and receive e-mails that include text,
audio, and images. To use this feature, you need to
set up your e-mail account.
p. 50
1. Enter the e-mail subject in the Subject line.
2. Move to the Message field.
3. Enter the message text.
4. Select the Attach files line.
This folder stores all types of messages you have
received, except for e-mails. MMS, SMS, voicemail,
WAP push messages from the WAP server, and
configuration messages are stored here.
Configuration messages, which are sent from your
service provider, contain network parameters to let
you easily apply network settings to your phone.
When a message has been received, the phone
alerts you by:
• Displaying a message icon and text notification
• Sounding or vibrating, depending on the
message alert setting
To read a message immediately, press <View>. To
read it later, press <Exit>.
For an MMS notification, press <Options> and
select Retrieve. The message is downloaded from
the MMS server to the phone’s memory.
Viewing a message in Inbox
Messages (OK 5)
Inbox (OK 5.2)
Viewing a message at the time of its receipt
Menu functions
5. Press [OK] to check the files you want.
6. Press <Options> and select Attach.
7. Press <Options> to access the following
options:
• Attached file list: display the file list you
attached.
• Add name card: add a contact as a Vcard
format.
• Add v-calendar: add a calendar memo.
• Delete all attachments: delete all of the
attached files.
• Save to Drafts: save the e-mail in the
Drafts box.
8. When you have finished, press [OK].
9. Enter an e-mail address.
To send the e-mail to more than one recipient,
press [Down] and fill in additional destination
fields.
10. Press [OK] to send the e-mail.
On the message list, the following icons are
available, depending on the message type:
•
SMS
•
MMS
•
MMS notification
•
Configuration
•
WAP push
•
SIM
• Depending on the DRM (Digital Rights
Management), you may not be able to forward
some messages. They are indicated by the
icon.
• An ! icon shows that a message was sent with
high priority. A grey icon means that the
message is of low priority.
While viewing the message list, press <Options> to
access the following options:
43
Menu functions
•
•
•
•
•
•
•
•
•
•
•
•
View: display the selected message. For MMS
notifications, you can access the file properties.
Retrieve: retrieve the MMS message from the
server.
Reject: reject the MMS message.
Cancel retrieving: cancel retrieving the MMS
message from the server.
Reply: send a reply to the sender.
Reply to all: send a reply to the sender and all
recipients.
Forward: forward the message to other people.
Install: apply the configuration value in the
message to the phone.
Sort by: change the sort order of the message
list.
Delete: delete the currently selected message.
Delete all: delete all messages.
Details: access the message properties.
Using message options
While viewing a message, press <Options> to
access the following options:
SMS messages
• Call: dials the highlighted phone number.
• Create email: send an e-mail t the highlighted
e-mail address.
• Reply: reply to the sender.
• Forward: forward the message.
44
•
•
•
•
Call back: dial the phone number of the sender.
Save to Contacts: extract phone numbers or
e-mail addresses from the message and saves
them in Phonebook.
Move to SIM/Move to phone: move the
message between the phone’s memory and the
USIM/SIM card.
Delete: delete the message.
MMS messages
• Play: play the message.
• Call/Go to URL/Go to RTSP: dials the
highlighted phone number or access the
highlighted web link.
• Open file: open the selected media files.
• Add to bookmarks: save the highlighted web
link to the bookmark list.
• Create email: send an e-mail to the highlighted
e-mail address.
• Create multimedia message: send an MMS
message to the highlighted address.
• Reply: send a reply to the sender.
• Reply to all: send a reply to the sender and all
of the recipients.
• Forward: forward the message to another
person.
• Send to Album: send the message to the online
media album, if provided.
• Call back: dial the phone number of the sender.
•
•
•
Drafts (OK 5.3)
This folder stores messages you have saved to send
them at a later time while creating the message.
On the message list, press <Options> to access the
following options:
• View: open the selected message.
• Edit: edit the selected message.
• Send: send the selected message.
• Sort by: change the sort order of the list.
• Delete: delete the selected message.
• Delete all: delete all messages.
This folder stores messages you have tried to send
or have being sent.
The following icons on the message icons indicates
the sending status:
•
indicates the message is being sent.
•
indicates the message is failed to send.
While viewing the message list, press <Options> to
access the following options:
• View: display the selected message.
• Send again: resend the message.
• Edit: edit the selected message.
• Cancel sending: cancels sending the message.
• Sort by: change the sort order of the list.
• Delete: delete the message.
• Delete all: delete all messages.
• Details: access the message properties.
Messages (OK 5)
WAP push messages
• Go to URL: connect to the URL specified in the
message.
• Delete: delete the message.
Outbox (OK 5.4)
Menu functions
•
•
Save as template: save the message as a
template in the Multimedia templates folder.
Save files: save media items from the message
into your phone’s memory or a memory card.
Save to Contacts: extract phone numbers or
e-mail addresses from the message and save
them in Phonebook.
Delete: delete the message.
Details: access the message properties.
Sent box (OK 5.5)
This folder stores messages that you have sent
successfully.
While viewing the message list, press <Options> to
access the following options:
• View: display the selected message.
• Forward: forward the message to other people.
• Edit: edit the selected message.
• Sort by: change the sort order of the list.
45
Menu functions
•
•
•
Delete: delete the message.
Delete all: delete all messages.
Details: access the message properties.
Email inbox (OK 5.6)
This folder stores e-mails that you have received.
Viewing received e-mails
1. From the e-mail folder, press <Options>.
2. Select Download to get new e-mails from your
server.
The phone checks for new e-mails and retrieve
received e-mails. The icons tell you the status of
each e-mail:
•
: Retrieved e-mail
•
: Retrieved e-mail with attachments
•
: E-mail not retrieved
• Depending on the DRM (Digital Rights
Management), you may not be able to
forward some messages. They are
indicated by the
icon.
• An ! icon shows that an e-mail was sent
with high priority. A grey icon means that
the e-mail is of low priority.
3. Select an e-mail or header.
4. If the e-mail has more than one page, press
[ / ] to scroll through pages one by one.
5. Select an attached file to view or play it.
46
Using e-mail options
While viewing the e-mail list or an e-mail, press
<Options> to access the following options:
• View: open the selected e-mail.
• Retrieve: retrieve the body of the selected email header from the e-mail server.
• Reply: send a reply to the sender.
• Reply to all: send a reply to the sender and all
recipients.
• Forward: forward the e-mail.
• Save files: save media items from the message
into your phone’s memory or a memory card.
• Download: download new e-mails or headers
from the e-mail server.
• Sort by: change the sort order of the list.
• Save to Contacts: extract phone numbers or
e-mail addresses from the e-mail and save them
in Phonebook.
• Block: add the sender’s e-mail address or e-mail
subject to the Block list.
• Delete from phone: delete the selected e-mail
or all e-mails from the phone’s memory.
• Delete permanently: delete the selected
e-mail or all of the e-mails from both the phone’s
memory and the e-mail server.
• E-mail accounts: change the active e-mail
account.
• Details: access the e-mail properties.
Media album (OK 5.7)
Use this menu to access the Media Album service,
with which you can organise your own online media
album, adding media content and messages via the
wireless web. This menu is available only if
supported by your service provider.
Use this menu to create, edit, and send text
templates and MMS templates.
Text templates (OK 5.8.1)
Press <New> to create a new text template.
From the template list, press <Options> to access
the following options:
• Send: send the template as an SMS, MMS, file
messenger, or e-mail.
• New: add a new template.
• Edit: change the selected template.
• Delete: delete the template.
• Delete all: delete all templates.
Multimedia templates (OK 5.8.2)
When you access this menu, you can view the list of
templates you have saved.
Broadcast (OK 5.9)
Your phone receives Cell Broadcast (CB) messages,
which are text messages related to various topics,
such as weather forecast, traffic, and news report,
from networks. Use this menu to access received CB
messages.
Messages (OK 5)
Use this menu to preset frequently used messages.
Menu functions
Templates (OK 5.8)
From the template list, press <Options> to access
the following options:
• View: open the template.
• Send: send the template as an MMS message.
• New: add a new template.
• Edit: change the selected template.
• Delete: delete the template.
• Delete all: delete all templates.
All CB messages are stored in the Temporary folder
and will be deleted after a period of time. If you
don’t want a message to be deleted, save it to the
Archive folder. While viewing the message, press
<Options> and select Save.
On the message list, press <Options> to access the
following options:
• View: open the selected message.
• Delete: delete the selected message.
• Delete all: delete all of the messages in the
selected folder.
47
Menu functions
Delete all (OK 5.0)
Use this menu to delete all of the messages in each
message folder at once.
1. Press [OK] to check the message box(es) you
want.
2. Press <Delete>.
3. Press <Yes> to confirm the deletion.
Settings (OK 5. )
Use this menu to set up various options for using
messaging service.
Text message (OK 5. .1)
You can configure default SMS settings.
• Settings x: set the following properties in a
profile:
Centre address: store or change the number of
your message centre.
Expiration: set the length of time your
messages are stored in the SMS centre.
Default type: set the default message type. The
network can convert messages into the selected
format.
Name: enter a profile name.
• Sending settings: set up the following options
for sending an SMS message:
Reply path: allow the recipient to reply to you
through your SMS centre.
48
Delivery report: set the network to inform you
when your message has been delivered.
Network selection: select a preferred data
transmission method, either GSM (CS) or GPRS
(PS) network.
Keep a copy: leave the copies of your messages
in the Sent box folder after sending.
Character support: select a character encoding
type. If you select Automatic, the phone
switches the encoding type from GSM-alphabet
to Unicode if you enter a unicode character. Use
of unicode encoding will reduce the maximum of
number of the characters in a message to about
half. If this menu is not shown, your phone
provides the Automatic encoding by default.
Multimedia message (OK 5. .2)
You can configure default MMS settings.
• Sending options: set up the following options
for sending MMS messages:
Priority: set the priority level of your messages.
Expiration: set the length of time your
messages are stored in the MMS centre.
Delivery: set a time delay before messages are
sent.
Hide address: set your address to be hidden
from the recipients’ phones.
Request delivery report: set the network to
inform you when your message has been
delivered.
•
•
•
Messages (OK 5)
•
- Reject: the phone rejects all messages.
Send delivery report: set the network to send
a delivery report to a sender.
Send read report: determine whether or not
the phone sends a read-report to a sender.
Reject anonymous: reject messages from
anonymous senders.
Reject advertisement: reject advertisements.
MMS profiles: select a connection profile to be
used for MMS. You can also make or edit a new
profile.
p. 73
Message size: select the maximum file size of
MMS attachment. This file size may vary,
depending on your country.
Creation mode: select an MMS creation mode.
Warning: the phone informs you when you
create and send a message using unsupported
file formats.
Free: you can create and send messages using
unsupported file formats.
Restricted: you are not able to create and send
messages using unsupported file formats.
Slide interval: select the length of time the
display shows each page in a message.
Menu functions
•
Request read report: request a report from
each recipient as to when your message was
read by the recipient.
Keep a copy: leave the copies of your messages
in the Sent box folder after sending.
Add my name card: allow your contact
information to be attached to your messages via
the file messenger.
Add signature: edit and attach your signature
to messages via the file messenger.
Receiving options: set up the following options
for receiving MMS messages:
Home network: determine if your phone
retrieves new messages automatically when you
are in your home service area.
Roaming network: determine if your phone
retrieves new messages automatically when you
are roaming in another network.
Home network and Roaming network have the
following options:
- Auto download: the phone automatically
retrieves messages from the server.
- Manual: the phone receives notifications first
from the server. Use the Retrieve option to
manually download new messages.
- Restricted: the phone receives notifications
first from the server. When you attempt to
download messages, the phone informs you of
additional charges.
Email (OK 5. .3)
You can configure default e-mail settings.
• Sending options: set up the following options
for sending an e-mail:
49
Menu functions
•
50
From: set the sender name.
Sending account: select the default account.
Priority: change the priority level of your
e-mails.
Keep a copy: leave the copies of your e-mails in
the Sent box folder after sending.
Include body when replying: set whether or
not the phone includes the original e-mail text in
a reply.
Delivery report: set the network to inform you
when your e-mail has been delivered.
Add my name card: allow your contact
information to be attached to e-mails.
Add signature: attach your signature to
e-mails.
Input signature: edit your signature.
Receiving options: set up the following options
for receiving an e-mail:
Set download limit: determine the maximum
size for incoming e-mails. Your phone will reject
e-mails that exceed the specified size.
Auto polling: set the phone to automatically
check the e-mail server to download new e-mails
at the specified time intervals.
Polling frequency: set how often the phone
checks the e-mail server for automatic polling.
Block address: specify e-mail addresses to
reject e-mails from those addresses.
•
Block subject: specify subjects to reject e-mails
which contain those subjects.
Email profiles: select a network connection
profile to be used for sending and receiving
e-mail. You can also make or edit a profile.
p. 73
You cannot change e-mail profile settings
while an e-mail is being sent or retrieved.
•
Email accounts: select an account to be used
and set up e-mail accounts. Press <Options>
and select Edit to access the following options:
Account name: enter a name for the currently
selected account.
SMTP server: enter the IP address or domain
name of the outgoing e-mail server.
SMTP port: enter the SMTP port number.
Retrieving server type: select the protocol for
the incoming e-mail server. The remaining
options depend on the protocol type setting.
POP3 server/IMAP4 server: enter the IP
address or domain name of the POP3 or IMAP4
server.
POP3 port/IMAP4 port: enter the POP3 or
IMAP4 port number.
IMAP4 retrieving option: (only for IMAP4
protocol): set whether the phone retrieves only
new messages or all messages.
Retrieving option: set which part of e-mails
the phone retrieves from the server.
•
•
Channel: specify the channels from which you
receive broadcast messages.
When you select Respective channels, you can
set up a list of active CB channels.
Language: select the languages in which
broadcast messages display.
Menu functions
Memory status (OK 5. )
Use this menu to view the memory status for SMS,
MMS, e-mail, and push messages.
Messages (OK 5)
Keep in server: leave the copies of e-mails in
the server after retrieving.
My Address: set your e-mail address.
User name: set the user name for POP3 or
IMAP4 server connections.
Password: set the password for POP3 or IMAP4
server connections.
Use SMTP Authentication: activate the SMTP
authentication.
Same as POP3/IMAP4: select if you want the
SMTP server to have the same parameters as the
POP3 or IMAP4 server.
User name: enter the SMTP user name.
Password: set the SMTP password.
Voice mail (OK 5. .4)
You can change the number of the voicemail centre.
Push message (OK 5. .5)
You can determine whether or not your phone
receives push messages.
Broadcast (OK 5. .6)
Use this menu to change the settings for the
broadcast message service.
• Receive: enable or disable the reception of
broadcast messages.
51
Menu functions
File manager
(OK 6)
The File manager menu allows you to access
images, videos, ringtones, sounds, and other files
stored in the phone’s memory or a memory card.
To access this menu, press [OK] in Idle mode and
select File manager.
As a result of the DRM (Digital Rights
Management) system, some of the media items
you download from the Internet or receive by
MMS may require a license key to access them or
forward them to other people. You can acquire the
key from the website which owns the rights to the
content; use the Activate key option in the item
options.
Images
This menu displays the default wallpapers and
photos you have taken and images downloaded or
received in messages. You can also edit an image
using various editing options.
Viewing an image
1. Press [Left] or [Right] to scroll to an image
folder.
2. Select an image.
3. Press [Left] or [Right] to view other images.
Editing an image
1. Select a image.
52
2. Press <Options> and select Edit.
3. Change the photo using the following options:
• Resize: change the image size.
• Effects: change the colour tone or apply a
special effect to the photo.
• Adjust: adjust the image brightness,
contrast, or colour balance.
• Frames: apply a decorative frame to the
photo.
• Cliparts: add an image clip to the photo.
• Insert text: add text to the photo.
• Rotate: rotate the photo clockwise or
counterclockwise.
• Flip: flip the photo vertically or horizontally.
• Crop: select a variously sized and shaped
section of the photo.
4. When you have finished, press [OK].
5. Enter a photo name and press <Save>.
Using image options
While viewing an image, press <Options> to access
the following options:
• Send: send the selected file via MMS, e-mail, file
messenger, Bluetooth, infrared port, or online
media album, if provided.
• Hidden from bluetooth: hide the file so that
other Bluetooth devices cannot access it.
• Visible to bluetooth: share the file with other
Bluetooth devices.
•
•
•
•
While viewing the image list, press <Options> to
access the following options:
• View: open the selected image.
• Send: send the file via MMS, e-mail, file
messenger, Bluetooth, infrared port, or online
media album, if provided.
• Hidden from bluetooth: hide the file so that
other Bluetooth devices cannot access it.
•
•
•
•
•
•
•
•
•
Visible to bluetooth: share the file with other
Bluetooth devices.
Set as: set the image as your wallpaper for the
main display or external display, or a caller ID
image for a contact.
Move: move the file to another folder.
Copy: copy the file to another folder.
Delete: delete the selected file or all files.
Rename: change the name of the file.
Lock/Unlock: lock the file to prevent it from
being deleted, or unlock the file.
New folder: add a new folder.
Details: access the file properties.
Memory status: access memory information for
each folder in File manager.
File manager (OK 6)
•
•
•
•
•
•
Menu functions
•
•
•
Activate key: get a new license key when the
key for the selected DRM file expires.
Reactivate key: get another key even when the
key for the selected DRM file has not expired.
Set as: set the image as your wallpaper for the
main display or external display, or a caller ID
image for a contact.
Move: move the file to another folder.
Copy: copy the file to another folder.
Real size: show the image in the real size or
display size.
Slide show: set all images to display as a slide
show.
Edit: edit the image and save as a different file.
Delete: delete the selected file.
Rename: change the name of the file.
Details: access the file properties.
Key management: manage the license keys
you have acquired.
Downloading images
1. Press [Left] or [Right] to scroll to Downloads.
2. Select More pictures. You are connected to a
preset website.
3. Search for an image and follow the onscreen
instructions to download it.
Videos
This menu displays video clips you have recorded,
downloaded, or received in messages.
Playing a video clip
1. Press [Left] or [Right] to scroll to a video folder.
53
Menu functions
2. Select a video clip.
During playback, use the following keys:
Key
Description
OK
Pauses or resumes playback.
Up
Opens the play list.
Left
Goes to the previous file. Moves
backward in a file when held down.
Right
Skips to the next file. Skips forward in
a file when held down.
/
Down
•
•
•
•
•
•
Adjusts the volume.
Stops playback.
Using video options
During playback, press <Options> to access the
following options:
• Pause/Resume: pause or resume playback.
• Stop: stop playback.
• Send: send the selected file via MMS, e-mail, file
messenger, Bluetooth, infrared port, or online
album, if provided.
• Add to play list: add the video clip to a play list.
• Open play list: open the current active play list.
• Activate key: get a new license key when the
key for the selected DRM file expires.
54
•
•
Reactivate key: get another key even when the
key for the selected DRM file has not expired.
Hidden from bluetooth: hide the file so that
other Bluetooth devices cannot access it.
Visible to bluetooth: share the file with other
Bluetooth devices.
Show controller/Hide controller: show or
hide the control bar of the Media player.
Details: access the file properties.
Player settings: change the default settings for
playing files.
Play options: select a repeat mode.
Volume: select a volume level.
Controller: show or hide the control bar of
Media player.
Audio player skin: select a skin image.
VOD settings: activate a connection profile to
be used for accessing a streaming server. You
can also make or edit a profile.
p. 73
Key management: manage the license keys
you have acquired.
Downloading video clips
1. Press [Left] or [Right] to scroll to Downloads.
2. Select More videos. You are connected to a
preset website.
3. Search for a video clip and follow the onscreen
instructions to download it.
Music
This menu displays AAC or MP3 music files you have
downloaded or received in messages. You can also
play streaming contents.
•
•
•
•
Playing music
During playback, use the following keys:
•
Description
•
OK
Pauses or resumes playback.
Up
Opens the play list.
•
•
Left
Goes to the previous file. Moves
backward in a file when held down.
Right
Skips to the next file. Skips forward
in a file when held down.
/
Down
Adjusts the volume.
•
Stops playback.
Using music options
During playback, press <Options> to access the
following options:
• Pause/Resume: pause or resume playback.
• Stop: stop playback.
• Send: send the selected file via MMS, e-mail, file
messenger, Bluetooth, infrared port, or online
album, if provided.
•
File manager (OK 6)
Key
Menu functions
Select a music file. The selected music plays.
Add to play list: add the music to a play list.
Open play list: open the play list.
Activate key: get a new license key when the
key for the selected DRM file expires.
Reactivate key: get another key even when the
key for the selected DRM file has not expired.
Hidden from bluetooth: hide the file so that
other Bluetooth devices cannot access it.
Visible to bluetooth: share the file with other
Bluetooth devices.
Details: access the file properties.
Player settings: change the default settings for
playing files.
Play options: select a repeat mode.
Volume: select a volume level.
Audio player skin: select a skin image.
VOD settings: activate a connection profile to
be used for accessing a streaming server. You
can also make or edit a profile.
p. 73
Key management: manage the license keys
you have acquired.
Downloading music files
1. Select More music. You are connected to a
preset website.
2. Search for a music file and follow the onscreen
instructions to download it.
55
Menu functions
Sounds
•
This menu displays the default ringtones and sound
files you have recorded, downloaded, or received in
messages. You can also access voice memos you
have recorded.
Playing a sound clip
1. Press [Left] or [Right] to scroll to a sound folder.
To access voice memos, scroll to the Voice
memos folder.
p. 36
2. Select a sound clip. The sound is played.
•
•
•
•
Downloading ringtones
Key
Description
Left
Goes to the previous file.
1. From the Ringtones folder, select More sound.
You are connected to a preset website.
2. Search for a ringtone and follow the onscreen
instructions to download it.
Right
Skips to the next file.
Games & More
Up/Down/
/
Adjusts the volume.
Use this menu to download Java games and play
them.
OK
Allows you to send the sound clip to
other people.
During playback, you can use the following keys:
Using sound options
During playback, press <Options> to access the
following options:
• Send: send the selected file via MMS, e-mail, file
messenger, Bluetooth, infrared port, or online
album, if provided.
• Hidden from bluetooth: hide the file so that
other Bluetooth devices cannot access it.
56
•
Visible to bluetooth: share the file with other
Bluetooth devices.
Set as ringtone: set the selected sound clip as
your call ringer.
Set as caller ID: set the selected sound clip as
a caller ID ringer for a contact.
Delete: delete the selected file or all files.
Rename: change the name of the file.
Details: access the file properties.
Playing Powerinlinex
1. From the Games & More folder, select
Powerinlinex.
2. Press any key, except for [ ].
3. Select PLAY or press <PLAY>.
4. Select a character.
5. Press <OK> to start a game.
6. Press [Up] to make the character move forward.
7. Press the Navigation keys to change the
direction.
During a game, press <Options> to access game
options.
Playing TheLastAge
Using Java game options
While viewing the game list, press <Options> to
access the following options:
• Play: launch the selected game.
• Move: move to the game to another folder.
• Delete: delete the selected game or all games.
• Rename: change the name of the game.
• New folder: add a new game folder.
•
Downloading new games
1. Select More games. You are connected to a
preset website.
2. Search for a game and follow the onscreen
instructions to download it.
File manager (OK 6)
During a game, press <Options> to access game
options.
•
•
Lock/Unlock: lock the game to prevent it from
being deleted, moved, and renamed, or unlock
the game.
Details: access the game properties.
Network settings: activate a connection profile
to be used for accessing a Java server. You can
also make or edit a profile.
p. 73
Memory status: access memory information for
each folder in File manager.
Menu functions
1. From the Games & More folder, select
TheLastAge.
2. Press any key, except for [ ].
3. Select START GAME or press <PLAY>.
4. Select New Game or Load Game.
5. Press <SKIP> and then <OK>.
6. Press [Up] to make your machine to move
forward.
7. Press the Navigation keys to change the
direction.
•
Other files
Files that you have received but which are not
supported by your phone are stored in this folder.
You cannot open these files on the phone.
Unsupported file formats include *.doc, *.ppt, *.txt,
and so on.
While viewing the file list, press <Options> to
access the following options:
57
Menu functions
•
•
•
•
•
•
•
•
Move: move the file to another folder.
Copy: copy the file to another folder.
Delete: delete the selected file or all files.
Rename: change the name of the file or folder.
Lock/Unlock: lock the file to keep it from being
deleted, or unlock the file.
Details: access the file properties.
New folder: add a new folder.
Memory status: access memory information for
each folder in File manager.
Memory card
Use this menu to access the media files stored on
the memory card. This option is only available when
you insert a memory card into the phone.
For details about using files, see the corresponding
menu.
Organiser
(OK 7)
The Organiser feature enables you to create and
manage your schedule, anniversaries, tasks, and
memos. You can also set alarms.
To access this menu, press [OK] in Idle mode and
select Organiser.
Alarm (OK 7.1)
Use this menu to set alarms. The alert type for a
normal alarm corresponds to the call alert type
settings in the currently selected profile. A wake-up
alarm is not affected by your profile setting.
Setting an alarm
1. Select the type of alarm.
2. Scroll to On on the Alarm line and press
[Down].
3. Enter the time for the alarm to sound and press
[Down].
4. Set the repeat option.
5. Select the Alert tone line.
6. Select an alarm melody.
7. Press <Options> and select Save.
Stopping an alarm
When the alarm sounds, choose either of the
following options to stop the alarm:
• Press <OK> to confirm the alarm.
58
•
Press <Snooze> to stop the wake-up alarm for
5 minutes. You can do this a maximum of 5
times.
Deactivating an alarm
Calendar (OK 7.2)
Use this menu to keep track of your monthly
schedule.
When you open the calendar, today’s date is marked
with a blue box. Scroll to the date you want. You can
move to the next or previous month by pressing
[ / ].
Press <Options> to access the following options:
• View: display the stored events for that date.
• New: add a new event, anniversary, task, or
memo. You can schedule more than one event
per day.
• Week view: display the week view screen.
• Go to today: display the current date.
• Go to date: display a specific date.
• Start date: set whether the calendar starts with
Sunday or Monday.
• Delete: delete the events for a specific period.
Entering a new schedule item
1. Select a date on the calendar.
2. Press <Options> and select New → Schedule.
3. Enter information or change the settings in the
following entry fields:
• Title: enter the title of the event.
• Details: enter the event details.
• Start/End: enter the starting or ending
times for the event.
• Start date/End date: enter the starting or
ending dates for the event.
• Location: enter information about the event
location.
• Alarm: select to set an alarm for the event
and set the time for the alarm.
• Repeat: select to set the event to recur. You
can select a repeat unit and set the date to
end repeating.
• Expiry: set when the event will be deleted
from the calendar.
4. Press <Options> and select Save.
Organiser (OK 7)
Consulting the calendar
Delete all: delete all of the events in the
calendar.
Menu functions
1. Select the alarm you want to deactivate.
2. Select Off on the Alarm line.
3. Press <Options> and select Save.
•
Entering a new anniversary
1. Select a date on the calendar.
2. Press <Options> and select New →
Anniversary.
59
Menu functions
3. Enter information or change the settings in the
following entry fields:
• Occasion: enter information about the
anniversary.
• Date: enter the date.
• Alarm: select to set an alarm for the
anniversary. You can set the number of days
before the event date and the time for the
alarm to sound.
• Repeat every year: select to set the phone
to remind you of the anniversary every year.
4. Press <Options> and select Save.
Entering a task
1. Select a date on the calendar.
2. Press <Options> and select New → Task.
3. Enter information or change the settings in the
following entry fields:
• Title: enter the title for the task.
• Task: enter the task content.
• Start date: enter the starting date.
• Due date: enter the ending date.
• Priority: select a priority level.
4. Press <Options> and select Save.
Entering a memo
1.
2.
3.
4.
60
Press
Enter
Enter
Press
<Options> and select New → Memo.
the memo text and press [Down].
the date.
<Options> and select Save.
Viewing an event
1. Select a date on the calendar to display the
events for that day. The list of events displays.
The following icons indicate the type of event:
•
Scheduled events •
Anniversaries
•
Tasks
Memos
•
2. Select an event to view its details.
Using event options
From the event list, press <Options> to access the
following options:
• View: access the selected event.
• New: add a new event.
• Completed/To do: change the status of the
selected task.
• Month view: switch to the month view screen.
• Week view: switch to the week view screen.
• Change date/Change due date/Reschedule:
change the date of the event.
• Delete: delete the selected event.
• Delete all: delete all of the events for the
selected day.
• Send schedule/Send task: send the event via
SMS, e-mail, file messenger, Bluetooth, or
infrared port.
• Send memo: send the memo via SMS.
Week view (OK 7.3)
Task (OK 7.7)
Use this menu to view events for the selected week.
The current date is marked in blue. Square brackets
on a calendar date indicate the types of events
scheduled for that day.
1. Scroll up to the date line and press [Left] or
[Right] to access another week.
2. Select the time cell that contains the event you
want.
Use this menu to display tasks you have created.
The icons on the right indicate the importance; the
lower the number on the icon, the higher the
priority. A check mark appears in the status check
box if the task has been completed.
Use this menu to view events for the selected date.
Schedule (OK 7.5)
This menu displays the scheduled events. If you
have set the Repeat and Alarm options, the
and
icons display.
Select a schedule item to view its details.
Anniversary (OK 7.6)
This menu displays anniversaries you have created.
If you have set the Repeat and Alarm options, the
and
icons display.
Memo (OK 7.8)
This menu displays memos you have created.
Select a memo to view its details.
Missed event alarm (OK 7.9)
Organiser (OK 7)
Select an event to view its details. The event opens
in Edit mode.
Menu functions
Today’s events (OK 7.4)
Select a task to view its details.
When you are unable to acknowledge an alarm for a
scheduled event or anniversary, the phone stores
the event alarm until you confirm it.
1. Select an event.
2. Press <Confirm> to confirm and delete the
event.
Memory status (OK 7.0)
This menu displays the number of events of each
type you have created, and the total number of
events you can store.
Select an anniversary item to view its details.
61
Menu functions
Camera
(OK 8)
You can use the camera module embedded in your
phone to take photos and record videos. Using the
Camera menu, you can turn on the camera and
manage your photos and video clips.
•
Use the keypad to change the camera
settings or switch to other modes.
p. 63
4. Press [OK] to take a photo. The photo is saved in
the Pictures folder.
Hold the phone still for one or two seconds
after pressing the camera shutter key to allow
the image data to process.
To access this menu, press [OK] in Idle mode and
select Camera, or press and hold [ ].
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras
are not allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
Taking a photo
The camera will produce JPEG photos.
When you take a photo in direct sunlight or in
bright conditions, shadows may appear on the
photo.
1. To turn on the camera, access the Camera menu
or press and hold [ ].
2. Press [ ] to switch between the interior lens
below the display and the exterior lens on the
external of the phone.
3. Adjust the image by aiming the lens at the
subject.
• Press <Options> to use the camera options.
See the next section.
62
5. To
Press
use photo options
<Options>.
delete the photo
<Delete> or [C].
p. 64
return to Capture mode
[OK].
Using camera options in Capture mode
In Capture mode, press <Options> to access the
following options:
• Take photo: take a photo.
• Record video: switch to Record mode.
• Switch camera: switch between the interior
lens and the exterior lens.
• Go to photos: display the photos stored in the
Pictures folder.
p. 52
• Shooting mode: take a photo in the following
modes:
Single shot: take a photo in the normal mode.
Multi shot: take several action stills. You can
select the number of still images the camera will
take.
•
•
•
•
•
ISO: change the ISO setting, which controls the
sensitivity of your camera. For low light
situations, lower the ISO number to increase the
quality. The higher the ISO number, the faster
the camera shutter functions and the more
sensitive the camera is to light. Higher ISO
settings may bring some distortion to an image.
White balance: adjust the colour balance of the
photo. You can make your photo appear warmer
or cooler.
Camera shortcuts: view the functions of the
keys you can use in Capture mode.
Menu functions
•
•
•
Using the keypad in Capture mode
Camera (OK 8)
Mosaic shot: take several stills and saves them
in one frame. You can select the layout.
Effects: change the colour tone of the image.
Frames: apply a decorative frame.
Flash: set the flash setting.
Timer: set a time delay before the camera takes
a photo.
Zoom: display the zoom control bar.
Brightness: display the brightness control bar.
Camera settings: change the default settings
for taking a photo.
Default name: change the default prefix of the
file name.
Default storage: select a memory location to
store photos.
Viewfinder: select a preview mode, either Full
Screen mode or Normal mode with actual ratio.
Shutter sound: select a camera shutter sound.
Capture quality: select an image quality.
Image size: select an image size.
Multi shot speed: select the shutter speed
between each shot in Multi Shot mode.
Spot metering: adjust the exposure based on a
specific area of the image. Select On to display
the spot focus frame in the middle of the image,
and change the exposure according to the
brightness of the image fragment in the frame.
You can use the keypad to customise your camera
settings in Capture mode.
Key
Function
Flips the image vertically.
Shows the mirror image.
Left/
Right
Adjusts the brightness of the image.
Up/
Down
Zooms in or out.
1
Switches to Record mode.
2
Changes the image size.
3
Changes the image quality.
p. 64
63
Menu functions
Key
Function
Recording a video
4
Changes the shooting mode and the
number of photos.
5
Changes the colour tone of the image.
7
Adds a decorative frame.
8
Sets the timer.
9
Goes to the Pictures folder.
You can use your phone just like a camcorder to
record what is currently displayed on the camera
screen and save it as a video file. The camera will
produce 3gp video clips.
1. To turn on the camera, access the Camera menu
or press and hold [ ].
2. Press [1] to switch to Record mode.
3. Press [ ] to switch between the interior lens
below the display and the exterior lens on the
external of the phone.
4. Adjust the image by aiming the lens at the
subject.
• Press <Options> to use the camera
options.
p. 65
• Use the keypad to change the camera
settings or switch to other modes.
p. 65
5. Press [OK] to start recording.
To pause, press <Pause>.
6. When you have finished, press [OK]. The video
automatically saves in the Videos folder.
p. 52
Changes the preview mode.
0
Turns the flash on or off.
Using photo options
After saving a photo, press <Options> to access
the following options:
• Viewfinder: return to Capture mode.
• View: open the selected photo when you take
multiple photos.
• Send: send the photo via MMS, e-mail, file
messenger, Bluetooth, or infrared port.
• Delete: delete the photo.
• Set as: set the photo as your wallpaper for main
or external display, or as a caller ID image for a
contact.
• Go to photos: display the photos stored in the
Pictures folder.
p. 52
• Rename: change the name of the photo.
64
7. To
Press
use the video options
<Options>.
delete the video clip
<Delete> or [C].
p. 65
return to Record mode
[OK].
Using camera options in Record mode
•
Audio record: record audio with a video clip.
Camcorder shortcuts: view the functions of
the keys you can use in Record mode.
Using the keypad in Record mode
Key
Function
Flips the image vertically.
Menu functions
Shows the mirror image.
Left/
Right
Adjusts the image brightness.
Up/Down
Zooms in or out.
1
Switches to Capture mode.
2
Changes the frame size.
3
changes the image quality.
4
Changes the video recording mode.
5
Changes the colour tone of the image.
7
Turns the audio on or off.
9
Goes to the Videos folder.
0
Turns the flash on or off.
Camera (OK 8)
In Record mode, press <Options> to access the
following options:
• Record: start recording.
• Take photo: switch to Capture mode.
• Switch camera: switch between the interior
lens or exterior lens.
• Go to videos: display the video clips stored in
the Videos folder.
p. 53
• Effects: change the colour tone of the image.
• Flash: change the flash setting.
• Zoom: display the zoom control bar.
• Brightness: display the brightness control bar.
• Video settings: change the following settings
for recording a video:
Default name: change the default prefix of the
video name.
Default storage: select a memory location to
store video clips.
Quality: select an image quality.
Recording time: select a video recording mode.
Select Normal to record a video within the limit
of the currently available memory. The length of
your video is determined by how much memory
has been used.
Select Limit for MMS to record a video suitable
for an MMS message.
Size: select an image size.
p. 62
p. 53
Using video options
After saving a video clip, press <Options> to access
the following options:
• Play: play back the video clip.
• Viewfinder: return to Record mode.
65
Menu functions
•
•
•
•
Send: send the video clip via MMS, e-mail, file
messenger, Bluetooth, or infrared port.
Delete: delete the video clip.
Go to videos: display the video clips stored in
the Videos folder.
p. 53
Rename: change the name of the video clip.
Settings
(OK 9)
Use this menu to customise your phone settings.
You can also reset the settings to their default
values.
To access this menu, press [OK] in Idle mode and
select Settings.
Profiles (OK 9.1)
Your phone provides you with sound profiles that
allow you to quickly and easily change the sound
settings of the phone for different events or
situations. Use this menu to adjust the properties of
each profile and activate the profile you need.
Editing a profile
1. Select the profile you want.
2. Press <Options> and select Edit.
3. Change the sound settings:
• Call alert type: press [OK] and select an
alert type for the call ringer.
• Voice call ringtone: press [OK] and select
a ringtone for the voice call ringer.
66
•
•
•
•
•
•
Video call ringtone: press [OK] and select
a ringtone for the video call ringer.
Tone volume: adjust the volume for the call
ringer.
Message alert type: press [OK] and select
an alert type for the message ringer.
Message alert tone: press [OK] and select
a ringtone for the message ringer.
Message alert repetition: select if the
phone repeats reminding you of a new
message.
Phone sounds: press [OK] and turn the
various sounds on the phone on or off.
All on: enable all tones.
Popup box alerts: cause the phone to beep
when a pop-up window displays.
Minute minder: cause the phone to beep
every minute during an outgoing call to keep
you informed of the length of your call.
Call connect tone: cause the phone to beep
when a call is connected to the system.
Call end tone: cause the phone to beep
when a call is disconnected by the other
person or the faded signal.
Power on/off: cause the phone to beep
when you turn on the phone.
Folder open/close: cause the phone to
sound when you open or close the phone.
From the profile list, select the profile you want.
Time & date (OK 9.2)
Use this menu to change the time and date
displayed on your phone. Before setting the time
and date, specify your time zone in the World clock
menu.
p. 37
• Time: enter the current time.
• Date: enter the current date.
• Time format: select a 12-hour or 24-hour time
format.
• Date format: select a date format.
• Summer time: activate daylight savings time.
• Auto update: select to receive time information
from your network.
Many different features of your phone’s system can
be customised to suit your preferences.
Language (OK 9.3.1)
Use this menu to select one of several languages for
the display text or T9 input mode.
Shortcuts (OK 9.3.2)
You can use the Navigation keys as shortcut keys to
access specific menus directly from Idle mode. Use
this menu to change these shortcut assignments.
Assigning a shortcut to a key
1. Select the key to be used as a shortcut key.
2. Select the menu that will be assigned to the key.
3. Press <Save>.
Settings (OK 9)
Changing the active profile
Phone (OK 9.3)
Menu functions
Alerts on call: cause the phone to beep
when you receive a new message or when
the time for an alarm comes during a call.
• Key tones: press [OK] and select a tone
which sounds when you press a key.
• Key tone volume: adjust the volume of the
key tones.
• Call answer mode: (for Car) press [OK]
and select how to answer an incoming call
when the phone is connected to a hands-free
car kit.
4. When you have finished, press <Options> and
select Save.
Using the shortcut options
From the Shortcuts screen, press <Options> to
access the following options:
• Assign: assign a shortcut menu to an empty
location.
• Change: change a shortcut menu.
• Remove: deactivate the shortcut assignment to
the selected key.
• Remove all: deactivate all of the shortcut
assignments.
67
Menu functions
Active folder (OK 9.3.3)
Cover LCD (OK 9.4.3)
Use this menu to answer incoming calls by opening
the phone.
Use this menu to change the settings for the
external display.
1. Select a display item type.
• Clock: you can select a clock type.
• Cover title: you can set a banner message.
• Wallpaper: you can select a wallpaper
image.
2. Select the image you want or enter the banner
message.
For Wallpaper, you can select a section of an
image.
3. Press <Save> or [OK].
4. Press <Change>.
Anykey answer (OK 9.3.4)
Use this menu to answer an incoming call by
pressing any key, except [ ] or <Reject>.
Side key (OK 9.3.5)
Use this menu to set how the phone reacts when
you press and hold [ / ] when a call comes in.
• Reject: the keys rejects the call.
• Silence: the keys mutes the call ringer.
Key management (OK 9.3.6)
Use this menu to manage the license keys you have
acquired to activate media contents locked by DRM
systems.
Display (OK 9.4)
Use this menu to change settings for the display and
the light.
Greeting message (OK 9.4.1)
Use this menu to enter the greeting that is displayed
on the main display or external display.
Wallpaper (OK 9.4.2)
You can change the background image that is
displayed on the main display in Idle mode.
68
LCD brightness (OK 9.4.4)
Use this menu to adjust the brightness of the main
display.
Backlight (OK 9.4.5)
You can select the length of time the backlight and
the display stays on.
• On: select the length of time the backlight stays
on in times of inactivity.
• Dim: select the length of time the display is in
Dimming mode after the backlight turns off.
• Sub LCD indicator: set whether or not the
icons are shown on the external display after the
display turns off.
Dialing display (OK 9.4.6)
Call (OK 9.5)
Use this menu to set options for call functions.
Caller ID (OK 9.5.1)
Some networks do not allow the user to change
this setting.
•
•
•
By network: use the default setting provided by
the network.
Send: send your number each time you make a
call.
Hide: ensure your number does not display on
the other person’s phone.
Diverting (OK 9.5.2)
This network service reroutes incoming calls to a
different phone number that you specify.
1. Select the type of calls to be diverted.
2. Select a call diverting option:
Settings (OK 9)
Use this menu to prevent your phone number from
being displayed on the phone of the person being
called.
Always: divert all calls.
Busy: divert calls when you are on another
call.
• No reply: divert calls when you do not
answer the phone.
• Unreachable: divert calls when you are not
in an area covered by your service provider
or when your phone is switched off.
• Cancel all: cancel all of the call diverting
options.
3. Enter the number to which the calls will be
diverted in the Divert to line.
4. If you selected No reply, move to the Waiting
time line and select the length of time the
network delays before diverting a call.
5. Press <Options> and select Activate. To
deactivate the call diverting, select Deactivate.
•
•
Menu functions
Use this menu to customise the settings for the
screen when entering a phone number for dialling.
• Font size: select a font size.
• Font colour: select a font colour.
• Background colour: select a background
colour.
Barring (OK 9.5.3)
This network service allows you to restrict your calls.
1. Select the type of calls to be barred.
2. Select a call barring option:
• All outgoing calls: prohibit outgoing calls.
• Outgoing int’l calls: prohibit international
calls.
• Int’l calls exc. Home: only allow calls to
numbers within the current country when you
are abroad, and to your home country.
• All incoming calls: prohibit incoming calls.
69
Menu functions
•
Incoming calls when roaming: prohibit
incoming calls when you use your phone
outside of your home country.
• Cancel all: cancel all of the call barring
settings, allowing calls to be sent and
received normally.
3. Enter the call barring password supplied by your
service provider.
4. Press <Options> and select Activate. To
deactivate the call barring, select Deactivate.
You can change the call barring password
obtained from your service provider. From the call
type list, press <Options> and select Change
password.
Waiting (OK 9.5.4)
This network service informs you when someone is
trying to reach you while you are on another call.
1. Select the type of calls to which the call waiting
option will apply.
2. Press <Options> and select Activate. To
deactivate the call waiting, select Deactivate.
Auto redial (OK 9.5.5)
Use this menu to make up to ten attempts to redial
a phone number after an unsuccessful call.
70
Closed user group (OK 9.5.6)
Use this menu to set incoming and outgoing calls to
be restricted to a selected user group. For details
about how to create a closed user group, contact
your service provider.
• Use user group: activate CUG index numbers.
• Outside access: enable calls to numbers other
than those in the Closed user group. This feature
depends on the nature of your CUG subscription.
• Default group: enable the default CUG, if you
have set one with your service provider. When
making a call, you are given the option of using
your default CUG, instead of selecting one from
the list.
• Group index: add, delete, or activate CUG
index numbers.
Video call (OK 9.5.7)
Use this menu to change the default settings for
using the video call feature.
• Show me: change the video camera settings for
receipt of video calls.
Optionally: you can select whether or not the
video camera is used each time you answer a
video call.
Always: the camera is always used.
• Retry by: set how to retry when the phone fails
to make a video call, by MMS or voice call.
Connectivity (OK 9.6)
•
Use this menu to set options for connection available
on your phone.
•
Bluetooth (OK 9.6.1)
• It is recommended that you don’t use the
Bluetooth feature while using multimedia
features such as voice recorder, camera, and
Media player, or vice versa, for a good
performance.
• Some devices may not be compatible with your
phone.
Setting up the Bluetooth feature
The Bluetooth menu provides the following
options:
• Activation: activate or deactivate the Bluetooth
feature.
• My devices: search for connectable Bluetooth
devices. See the next section.
•
Searching for and pairing with a Bluetooth
device
1. From the Bluetooth setting options, select My
devices.
2. Select Search new device.
After searching, a list of devices to which you can
connect is displayed. The following icons indicate
the type of device:
•
Hands-free or headset
•
Mobile phone
•
Computer
•
PDA
•
Unknown device
The colour of the icon indicates the status of the
device:
• Grey for unpaired devices
• Blue for paired devices
• Red for devices that are currently connected
to your phone
Settings (OK 9)
Bluetooth technology allows free wireless
connections between all Bluetooth-compliant
devices within a range of 10 metres. Since the
devices communicate using radio waves, they do not
need to be in line of sight to each other.
•
Menu functions
Using Bluetooth wireless, you can connect the phone
wirelessly to other Bluetooth devices and exchange
data with them, talk hands-free, or control the
phone remotely.
My phone’s visibility: allow other Bluetooth
devices to connect to your phone.
My phone’s name: assign a Bluetooth device
name to your phone, which is then displayed on
other devices.
Secure mode: determine if the phone asks for
your confirmation when other devices access
your data.
Bluetooth service: display available Bluetooth
services.
71
Menu functions
3. Select a device.
4. Enter a Bluetooth PIN code and press <OK>.
This code is used just once and you don’t need to
memorise it.
When the owner of the other device enter the
same code, pairing is finished.
Some devices, especially headsets or hands-free
car kits, may have a fixed Bluetooth PIN, such as
0000. If the other device has one, you must
enter the code.
Using device options
From the device list, press <Options> to access the
following options:
• Connect: connect to the currently selected
device. You need to enter the Bluetooth PIN.
• Disconnect: end the connection with the
device.
• Browse device: search for data from the
selected device and import data directly to your
phone.
• Authorised device/Unauthorised device:
determine if the phone asks you to permit
connection when other devices try to connect to
your phone.
• Delete: delete the device or all devices.
• Rename: rename the selected device.
72
Sending data via Bluetooth
1. Activate the Bluetooth feature.
2. Select the application in which the item you want
to send is stored.
3. Scroll to the item and press <Options>.
4. Select Send → Via bluetooth.
The phone searches for devices within range and
displays a list of available devices.
5. Select a device.
6. If necessary, enter the Bluetooth PIN needed for
pairing and press <OK>.
Receiving data via Bluetooth
To receive data via Bluetooth, your phone’s
Bluetooth feature must be active.
If an unauthorised Bluetooth device sends data to
your phone, the phone displays a confirmation
message. To receive data, press <Yes>.
Infrared (OK 9.6.2)
Use this feature to send and receive data through
the infrared port. To use an infrared connection, you
must do the following:
• Configure and activate an IrDA-compliant
infrared port on the other device.
• Activate the infrared feature on your phone;
select Infrared → On.
•
Align the IrDA port on the
phone with the IrDA port
on the other device.
Network (OK 9.6.3)
You can set up information about your network
connection. In most cases, you don’t need to change
the settings. In case of problems, please contact
your service provider.
Creating or editing a connection profile
Press <Options> and select New, or select the
connection profile you want to edit. The following
options are available:
• Set name: edit the name of the network setting.
• Access name: edit the access point name used
for the address of the GPRS network gateway.
• Auth type: choose the type of authentication
used.
• User ID: edit the server login ID.
• Password: edit the server password.
• Protocol: select the protocol from among WAP,
HTTP, and Other.
• Home URL: enter your homepage address.
• Proxy address/Port: (for the HTTP protocol)
set the proxy server address and port.
• Gateway address: (for the WAP protocol) set
the gateway address.
Settings (OK 9)
Use this menu to change the settings for connecting
to your cellular network.
• Network selection: select to either
automatically or manually select the network
used when roaming outside of your home area.
You can select a network other than your home
network only if there is a valid roaming
agreement between the two.
• Network mode: select the network you use.
Automatic: the phone scans for available
networks.
GSM 900/1800: the phone operates in the
combined GSM 900/1800 network.
GSM 1900: the phone operates in the GSM
1900 network. This option is only available in
USA.
Connections (OK 9.6.4)
Menu functions
If there is no communication
between your phone and the
other IrDA-compliant device
within 60 seconds of
activating the feature, it is
automatically deactivated.
UMTS: the phone operates in UMTS (3G
network) networks. You can get a higher speed
quality than on lower generation networks, and
use advanced data and information services,
such as video calls.
73
Menu functions
•
•
•
Secure connection: (for the WAP protocol) turn
the secure mode on or off.
Linger time (sec.): set a time period after
which the network is disconnected if there has
been no new data traffic in that time.
Advanced settings: provide you with the
following options:
Static IP: specify if you want to manually enter
an IP address; see the Local phone IP option. If
you want the IP address to be automatically
assigned by the server, remove the check mark.
Local phone IP: enter the IP address obtained
from the network operator, if you checked the
Static IP option.
Static DNS: specify if you want to manually
enter the DNS (Domain Name Server) address;
see the Server 1/2 option. If you want the
address to be automatically assigned by the
server, remove the check mark.
Server 1/2: enter the Domain Name Server
addresses.
Traffic class: select the traffic class, if you
selected the PS network.
Managing connection profiles
On the list of connection profiles, scroll to a profile
and press <Options> to access the following
options:
• Edit: edit the selected connection profile.
74
•
•
•
•
New: add a new connection profile.
Rename: change the name of the selected
connection profile.
Delete: delete the selected connection profile.
Restore: restore the changed settings to the
default status.
You cannot edit or delete the default connection
profiles.
Application settings (OK 9.7)
You can customise the settings for using applications
available on the phone.
Internet (OK 9.7.1)
Use this menu to select a connection profile to be
used for accessing the Internet. You can also make
or edit a profile.
p. 73
Messages (OK 9.7.2)
Use this menu to change the default settings for
using the message feature.
p. 48
Contacts (OK 9.7.3)
Use this menu to change the settings for using
Phonebook.
p. 34
Camera (OK 9.7.4)
Use this menu to change the default settings for
taking photos.
p. 63
Video recorder (OK 9.7.5)
Phone lock (OK 9.8.1)
Use this menu to change the default settings for
recording video clips.
p. 65
The Phone lock feature locks the phone from
unauthorised use.
Voice recorder (OK 9.7.6)
When this feature is enabled, you must enter a 4- to
8-digit phone password each time the phone is
switched on.
Media player (OK 9.7.7)
Use this menu to change the default settings for
playing media files in the Media player.
p. 36
VOD (OK 9.7.8)
Security (OK 9.8)
Use this menu to protect the phone against
unauthorised use by managing the several access
codes of your phone and USIM/SIM card.
If you enter an incorrect PIN/PIN2 three times in
succession, the USIM/SIM card is blocked. To
unblock it you need to enter your PUK/PUK2
(Personal Unblocking Key). The codes are
supplied by your network operator.
SIM lock (OK 9.8.2)
The SIM lock feature allows your phone to work only
with the current USIM/SIM by assigning a SIM lock
code. You must enter the SIM lock code to use a
different SIM card.
Settings (OK 9)
Use this menu to activate a connection profile to be
used for accessing streaming servers to use VOD
services. You can also make or edit a profile.
p. 73
The password is preset to 00000000. To change the
password, use the Change phone password
menu.
Menu functions
Use this menu to change the default settings for the
voice recorder.
p. 37
PIN lock (OK 9.8.3)
The 4- to 8-digit PIN (Personal Identification
Number) protects your USIM/SIM card against
unauthorised use. When this feature is enabled, the
phone requires your PIN each time it is switched on.
Fixed dialling mode (OK 9.8.4)
If supported by your USIM/SIM card, Fixed Dialling
Number (FDN) mode restricts your outgoing calls to
a limited set of phone numbers. When this feature is
enabled, you can make calls only to phone numbers
stored on the USIM/SIM card. To use this feature,
you must enter your PIN2.
75
Menu functions
Change phone password (OK 9.8.5)
Reset settings (OK 9.0)
Use this menu to change your phone password. The
password is preset to 00000000.
Use this menu to reset the phone to its default
settings.
1. Enter the phone password and press
<Confirm>.
Privacy lock (OK 9.8.6)
Use this menu to lock your messages, media
contents, contacts, and call logs.
1. Press [OK] to check the item(s) to lock.
2. Press <Save> to lock the marked items.
3. Enter the phone password and press
<Confirm>.
To access a locked item, you need to enter the
phone password.
Change PIN code (OK 9.8.7)
Use this menu to change your PIN. The PIN lock
feature must be enabled to use this feature.
Change PIN2 code (OK 9.8.8)
If supported by your USIM/SIM card, the Change
PIN2 feature changes your current PIN2.
Memory status (OK 9.9)
Use this menu to check the amount of memory
being used for storing data, such as SMS, MMS,
Email, Push messages, File manager, Contacts, and
Organiser items. You can also view the amount of
shared memory or a memory card.
76
The password is preset to 00000000. You
can change this password
p. 75
2. Press <Yes>. The phone automatically turns
itself off and then back on.
Solve problems
“No service,” “Network failure,” or “Not
done” displays
Help and personal needs
•
To save the time and expense of an unnecessary service
call, perform the simple checks in this section before
contacting a service professional.
•
When you switch on your phone, the
following messages may appear:
“Please insert SIM card”
• Be sure that the USIM/SIM card is correctly
installed.
“Phone lock”
• The automatic locking function has been
enabled. You must enter the phone’s password
before you can use the phone.
“PIN lock”
• You are using your phone for the first time. You
must enter the PIN supplied with the USIM/SIM
card.
• The PIN lock feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN lock menu.
“PUK lock”
• The PIN code was entered incorrectly three times
in succession, and the phone is now blocked.
Enter the PUK supplied by your service provider.
The network connection has been lost. You may
be in a weak signal area. Move and try again.
You are trying to access an option for which you
have no subscription with your service provider.
Contact the service provider for further details.
You have entered a number but it was not
dialled
•
•
•
Be sure that you have pressed [ ].
Be sure that you have accessed the right cellular
network.
Be sure that you have not set an outgoing call
barring option.
Your correspondent cannot reach you
•
•
•
Be sure that your phone is switched on. ([ ]
pressed for more than one second.)
Be sure that you are accessing the correct
cellular network.
Be sure that you have not set an incoming call
barring option.
Your correspondent cannot hear you
speaking
•
•
Be sure that you have switched on the
microphone.
Be sure that you are holding the phone close
enough to your mouth. The microphone is
located at the bottom of the phone.
77
The phone starts beeping and “Low battery”
flashes on the display
•
Your battery is insufficiently charged. Recharge
the battery.
The audio quality of the call is poor
•
•
Check the signal strength indicator on the
display (
). The number of bars indicates the
signal strength from strong (
) to weak ( ).
Try moving the phone slightly or moving closer
to a window if you are in a building.
No number is dialled when you re-call a
Phonebook entry
•
•
Use the contact search feature to ensure the
number has been stored correctly.
Re-store the number, if necessary.
The battery doesn't charge properly or the
phone sometimes turns itself off
•
Wipe the charging contacts both on the phone
and on the battery with a clean soft cloth.
If the above guidelines do not help you to
solve the problem, take note of:
•
•
•
The model and serial numbers of your phone
Your warranty details
A clear description of the problem
Then contact your local dealer or Samsung aftersales service.
78
Health and safety information
SAR certification information
This phone meets European Union (EU)
requirements concerning exposure to radio waves.
Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured to not
exceed the limits for exposure to radio-frequency
(RF) energy, as recommended by the EU Council.
These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the
general population. The guidelines were developed
by independent scientific organisations through the
periodic and thorough evaluation of scientific
studies. The limits include a substantial safety
margin designed to ensure the safety of all persons,
regardless of age and health.
The exposure standard for mobile phones employs a
unit of measurement known as Specific Absorption
Rate (SAR). The SAR limit recommended by the EU
Council is 2.0 W/kg.*
The highest SAR value for this model phone was
0.702 W/kg.
* The SAR limit for mobile phones used by the public is 2.0
watts/kilogram (W/kg) averaged over ten grams of body
tissue. The limit incorporates a substantial margin of safety
to give additional protection for the public and to account for
any variations in measurements. The SAR values may vary,
depending on national reporting requirements and the
network band.
Before a new model phone is available for sale to the
public, compliance with the European R&TTE
Directive must be shown. This directive includes as
one of its essential requirements the protection of
the health and safety of the user and any other
person.
•
•
•
•
Precautions when using batteries
•
•
•
Never use a charger or battery that is damaged
in any way.
Use the battery only for its intended purpose.
If you use the phone near the network’s base
station, it uses less power. Talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
•
Battery charging time depends on the remaining
battery charge, the type of battery, and the
charger used. The battery can be charged and
discharged hundreds of times, but it will
gradually wear out. When the operation time is
noticeably shorter than normal, it is time to buy
a new battery.
If left unused, a fully charged battery will
discharge itself over time.
Use only Samsung-approved batteries, and
recharge your battery only with Samsungapproved chargers. Disconnect the charger from
the power source when it is not in use. Do not
leave the battery connected to a charger for
more than a week, since overcharging may
shorten its life.
Extreme temperatures will affect the charging
capacity of your battery: it may require cooling
or warming first.
Do not leave the battery in hot or cold places
because the capacity and lifetime of the battery
will be reduced. Try to keep the battery at room
temperature. A phone with a hot or cold battery
may not work temporarily, even when the
battery is fully charged. Li-ion batteries are
particularly affected by temperatures below 0°C
(32°F).
Health and safety information
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as to
use only the power required to reach the network. In
general, the closer you are to a base station, the
lower the power output of the phone.
79
Health and safety information
•
•
Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object like a
coin, clip or pen causes a direct connection
between the + and – terminals of the battery
(metal strips on the battery). For example, do
not carry a spare battery in a pocket or bag
where the battery may contact metal objects.
Short-circuiting the terminals may damage the
battery or the object causing the short-circuiting.
Dispose of used batteries in accordance with
local regulations. Always recycle. Do not dispose
of batteries in a fire.
Road safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime.
But an important responsibility accompanies the
benefits of wireless phones, one that every user
must uphold.
When driving a car, driving is your first
responsibility. When using your wireless phone while
driving, follow local regulations in the country or
region you are in.
Operating environment
Remember to follow any special regulations in force
in the area you are in, and always switch off your
phone whenever it is forbidden to use it, or when it
may cause interference or danger.
80
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it
is recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
Electronic devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone. Consult the
manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent
with the independent research and
recommendations of Wireless Technology Research.
If you have any reason to suspect that interference
is taking place, switch off your phone immediately.
Hearing aids
Potentially explosive environments
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your hearing
aid manufacturer to discuss alternatives.
Switch off your phone when in any area with a
potentially explosive atmosphere, and obey all signs
and instructions. Sparks in such areas could cause
an explosion or fire resulting in bodily injury or even
death.
Other medical devices
Your physician may be able to assist you in obtaining
this information.
Switch off your phone in health care facilities when
regulations posted in these areas instruct you to do
so.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
Users are advised to switch off the phone while at a
refuelling point (service station). Users are reminded
of the need to observe restrictions on the use of
radio equipment in fuel depots (fuel storage and
distribution areas), chemical plants, or where
blasting operations are in progress.
Health and safety information
If you use any other personal medical devices,
consult the manufacturer of your device to
determine if it is adequately shielded from external
RF energy.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
the areas below decks on boats, chemical transfer or
storage facilities, vehicles using liquefied petroleum
gas, such as propane or butane, areas where the air
contains chemicals or particles, such as grain, dust
or metal powders, and any other area where you
would normally be advised to turn off your vehicle
engine.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted facilities
Switch off your phone in any facility where posted
notices require you to do so.
81
Health and safety information
Emergency calls
Other important safety information
This phone, like any wireless phone, operates using
radio signals, wireless, and landline networks as well
as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any wireless phone
for essential communications like medical
emergencies.
•
To make or receive calls, the phone must be
switched on and in a service area with adequate
signal strength. Emergency calls may not be
possible on all wireless phone networks or when
certain network services and/or phone features are
in use. Check with local service providers.
To make an emergency call:
1. Switch on the phone.
2. Key in the emergency number for your present
location. Emergency numbers vary by location.
3. Press [ ].
Certain features like Call Barring may need to be
deactivated before you can make an emergency call.
Consult this document and your local cellular service
provider.
82
•
•
•
•
•
Only qualified personnel should service the
phone or install the phone in a vehicle. Faulty
installation or service may be dangerous and
may invalidate any warranty applicable to the
device.
Check regularly that all wireless phone
equipment in your vehicle is mounted and
operating properly.
Do not store or carry flammable liquids, gases,
or explosive materials in the same compartment
as the phone, its parts, or accessories.
For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including installed or portable
wireless equipment, in the area over the air bag
or in the air bag deployment area. Improperly
installed wireless equipment could result in
serious injury if the air bag inflates.
Switch off your phone before boarding an
aircraft. It is dangerous and illegal to use
wireless phones in an aircraft because they can
interfere with the operation of the aircraft.
Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
Care and maintenance
•
•
•
•
•
Do not use harsh chemicals, cleaning solvents,
or strong detergents to clean the phone. Wipe it
with a soft cloth slightly dampened in a mild
soap-and-water solution.
Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
Do not put the phone in or on heating devices,
such as a microwave oven, stove, or radiator.
The phone may explode when overheated.
Use only the supplied or an approved
replacement antenna. Unauthorised antennas or
modified accessories may damage the phone and
violate regulations governing radio devices.
If the phone, battery, charger, or any accessory
is not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
Health and safety information
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
• Keep the phone and all its parts and accessories
out of the reach of small children.
• Keep the phone dry. Precipitation, humidity, and
liquids contain minerals that corrode electronic
circuits.
• Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to
the phone.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s
electronic circuit boards.
• Do not drop, knock, or shake the phone. Rough
handling can break internal circuit boards.
83
Index
A
ABC mode, text input • 23
Active folder • 68
Alarm • 58
Answering
call • 24, 27
second call • 25
Anykey answer • 68
Auto redial • 70
B
Backlight time, set • 68
Barring, calls • 69
Battery
charging • 7
low indicator • 8
precautions • 79
Bluetooth
receiving, data • 72
sending, data • 72
settings • 71
Broadcast messages • 47
Browser, WAP • 39
C
Calculator • 38
Call costs • 29
Call records
dialled • 29
missed • 28
received • 29
Call time • 30
Caller group • 32
Caller ID • 69
Calls
84
answering • 24, 27
barring • 69
diverting • 69
holding • 25
redialling • 24
rejecting • 24
waiting • 70
Camera
photos • 62
videos • 64
Characters, enter • 22
Conference call • 27
Configuration messages • 43
Connect tone • 66
Connection settings • 73
Contacts
copying • 33
deleting • 31
editing • 30, 31
options • 30
setting • 34
speed-dialling • 32
Converter • 38
Creating messages
e-mail • 42
MMS with attachments • 42
MMS • 41
SMS • 41
Creating organiser
anniversaries • 59
events • 59
memos • 60
tasks • 60
D
Deleting
contacts • 31
e-mails • 46
events • 60
MMS messages • 45
photos • 53, 64
SMS messages • 44
video clips • 66
Delivery reports, message • 48
Dialled calls • 29
Display
brightness • 68
icons 10
language • 67
settings • 68
Diverting, calls • 69
DTMF tones, send • 26
E
E-mails
creating/sending • 42
deleting • 46
settings • 49
viewing • 46
Emergency calls • 82
F
FDN (Fixed Dialling Number) mode •
75
File manager • 52
File messenger • 42
Folder tone • 66
Forwarding
e-mails • 46
MMS messages • 44
SMS messages • 44
G
Games • 56
Greeting message • 68
H
Health and safety • 78
Holding, call • 25
I
K
key tone volume • 66
Keypad tones
selecting • 67
sending • 26
L
Language, select • 67
Last number, redial • 24
LCD brightness • 68
Locking
media contents • 76
phone • 75
SIM card • 75
Loudspeaker • 26
Low battery indicator • 8
M
Media files • 52
Media player • 34
Memory status
P
N
Received calls • 29
Received messages
e-mail • 46
MMS • 44
SMS • 44
web • 45
Recording
videos • 64
voice memos • 36
Redialling
automatically • 70
Name card • 33
Names
entering • 22
searching • 30
Network selection • 73
O
Organiser • 58
Outbox, messages • 45
Own number • 33
Password
barring • 70
phone • 76
Phone
care and maintenance • 83
display • 10
icons • 10
locking • 75
password • 76
resetting • 76
switching on/off • 8
unpacking • 6
Photos
deleting • 53, 64
taking • 62
viewing • 52
PIN, change • 76
PIN2, change • 76
Power on/off tone • 66
Privacy • 76
Problems, solve • 77
Profiles • 66
Index
Icons, description • 10
Images, downloaded • 52
Inbox, messages
e-mail • 46
MMS • 44
SMS • 44
web • 45
Infrared, connect • 72
International calls • 24
Internet • 39
contacts • 34
messages • 51
phone • 76
scheduled events • 61
Message tone • 66
Messages
CB • 47
greeting • 68
MMS with attachments • 42
MMS • 41
SMS • 41
web • 45
Minute minder • 66
Missed alarm events • 61
Missed calls • 28
MMS messages
creating/sending • 41
deleting • 45
settings • 48
viewing • 44
Multi-party calls • 27
Muting
key tones • 26
microphone • 26
R
85
Index
manually • 24
Resetting phone • 76
Ringtones, downloaded • 55
Road safety • 80
Roaming • 73
S
Safety
information • 78
precautions • 1
Sent messages • 45
Shortcuts • 67
Side key, set • 68
SIM card
inserting • 7
locking • 75
SMS messages
creating/sending • 41
deleting • 44
settings • 48
viewing • 44
Sound setting • 66
Sounds, downloaded • 56
Speed-dial • 32
Switching on/off
microphone • 26
phone • 8
T
Templates
MMS • 47
text • 47
Text input mode, change • 22
Text, enter • 22
Tone
connect • 66
folder • 66
keypad • 67
message • 66
86
minute minder • 66
power on/off • 66
V
Video calls
making • 27
setting • 70
Video clips
playing • 53
recording • 64
Voice memos
deleting • 37
playing • 36
recording • 36
Voicemail server • 51
W
Waiting call • 70
Wallpaper
external display • 68
main display • 68
WAP browser • 39
World time • 37
Declaration of Conformity (R&TTE)
: EN 60950-1:2001
: EN 301 489-01 v1.4.1 (08-2002)
EN 301 489-07 v1.2.1 (08-2002)
EN 301 489-17 v1.2.1 (08-2002)
EN 301 489-24 v1.2.1 (11-2002)
: EN 50360:2001
EN 50361:2001
: EN 301 511 v9.0.2 (03-2003)
EN 301 908-1 v2.2.1 (10-2003)
EN 301 908-2 v2.2.1 (10-2003)
EN 300 328-1(A1) v1.3.1 (12-2001)
EN 300 328-2(A1) v1.2.1 (12-2001)
Yong-Sang Park / S. Manager
(name and signature of authorised person)
* This is not the address of the Samsung Service Centre. For the address or the phone number of the Samsung Service
Centre, see the warranty card or contact the retailer where you purchased your phone.
(place and date of issue)
2005. 04. 29
Samsung Electronics Euro QA Lab.
Blackbushe Business Park, Saxony Way,
Yateley, Hampshire, GU46 6GG, UK
which will be made available upon request.
(Representative in the EU)
Samsung Electroniacs QA Lab.
The technical documentation kept at:
BABT, Balfour House, Churchfield Road ,
Walton-on-Thames, Surrey, KT12 2TD, UK
Identification mark: 0168
The conformity assessment procedure referred to in Article 10 and detailed in Annex[IV] of
Directive 1999/5/EC has been followed with the involvement of the following Notified Body(ies):
We hereby declare the [all essential radio test suites have been carried out and that] the above
named product is in conformity to all the essential requirements of Directive 1999/5/EC.
Network
SAR
Safety
EMC
(factory name, address*)
- Samsung Electronics Co., Ltd, 94-1 Imsoo-Dong, Gumi City, Kyung Buk, Korea,
730-350
Manufactured at:
(Model name)
SGH-Z300
(Product description)
GSM900/GSM1800/GSM1900/WCDMA
with Bluetooth
Portable Cellular Telephone
For the following product:
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement