Infinity REF6432CFP car speaker Specification
Infinity REF6432CFP is a 4" x 6" 2-Way Custom-Fit Plate speaker system that delivers an impressive audio experience with its 135W peak power handling and 45W RMS. With a frequency response ranging from 72Hz to 21kHz, this speaker system reproduces deep bass, clear vocals, and crisp highs. It features a tweeter-level control that allows you to adjust the tweeter output according to your preference or compensate for off-axis placement.
Advertisement
Advertisement
wner’s oup,Inc.
rance 1/09 ,F
Klaus Lebherz
Château du Loir
Harman Consumer Gr ty andards: oduct described in this o echnical st ty that the pr
Inc.
ion of Conformi Declarat
Harman Consumer Group,
Tours wn responsibili
72500 Château du Loir oute de 2,r
France
We, declare in o
EN61000-6-3:2001
EN 61000-6-1:2001 manual is in compliance with t es pays.
t/ou dans d’autr ther countries.
antie.
REF6432OM1/09 ure de la gar alable est exigé pour la couvert ats-Unis e ates and/or o
• Part No.
ement sans communication préalable.
ed in the United St ed,déposée aux Ét oits réservés.
Incorporat egister
Tous dr ed,r eserved.
t notice.
Incorporat oodbury,NY 11797 USA
Un numéro de série v t design aux É.U.A.
e withou ts au chang ernational Industries, ed.All rights r e,W o chang age.
ver e subject t ark Driv ance ar arranty co ays P t l’aspect sont suje
Conception e
Incorporat tional Industries,
250 Crossw k of Harman Interna que commerciale de Harman Int ed for w téristiques e onal Industries, oup,Inc., les carac tions and appear ernati tysystems.com
alid serial number is requir ty is a trademar es,specifica tur Fea
Av www.infini
Harman Consumer Gr
Infini
©2009 Harman Int
Infinity est une mar
Les dispositifs,
Designed and engineered in the USA.
m
6"
" mm
/16
1/1
93m
3-1
105
4-3 mm
/8"
130
5-1 m
" /16
80m
3-3 m
6" 5/1
48m
1-1 m
6"
11m
7/1 mm
/4"
158
6-1 m
/8"
42m
1-5 m
3"
76m mm
/4"
133
5-1
R E F E R E N C E
6432cfp
BL (T-m)
DCR (ohms)
Mms (g)
Sd (sq cm)
Cms (µm/N)
3.82
2.30
7.46
63.6
437
Vas (l)
Fs (Hz)
Qes
Qms
Qt
2.48
88.1
0.65
9.61
0.61
SPECIFICATIONS
Type: 4" x 6" 2-Way Custom-Fit Plate Power Handling, Peak:
Impedance: 2 Ohms Frequency Response:
Power Handling, RMS: 45W Sensitivity (2.83V, 1m):
135W
72Hz – 21kHz
91dB
WARRANTY: Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it was purchased.Your local Infinity car audio retailer can help you determine the length of your warranty.To register your product, please visit us at www.infinitysystems.com.
SPECIFICATIONS
Type:
Impedance:
4" x 6" 2-Way Custom-Fit Plate Power Handling, Peak:
2 Ohms Frequency Response:
Power Handling, RMS: 45W Sensitivity (2.83V, 1m):
135W
72Hz – 21kHz
91dB
WARRANTY: Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it was purchased.Your local Infinity car audio retailer can help you determine the length of your warranty.To register your product, please visit us at www.infinitysystems.com.
SPECIFICATIONS
Type: 4" x 6" 2-Way Custom-Fit Plate Power Handling, Peak:
Impedance: 2 Ohms Frequency Response:
Power Handling, RMS: 45W Sensitivity (2.83V, 1m):
135W
72Hz – 21kHz
91dB
WARRANTY: Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it was purchased.Your local Infinity car audio retailer can help you determine the length of your warranty.To register your product, please visit us at www.infinitysystems.com.
2x
1x
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a tweeter-level switch.The normal setting for this switch is the “0dB” position, which provides an apparently “flat” response.
Tweeter output may be increased according to the user’s preference, or to compensate for off-axis placement (where the speaker does not directly face the listening position), by setting the switch to the
“+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a tweeter-level switch.The normal setting for this switch is the “0dB” position, which provides an apparently “flat” response.
Tweeter output may be increased according to the user’s preference, or to compensate for off-axis placement (where the speaker does not directly face the listening position), by setting the switch to the
“+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a tweeter-level switch.The normal setting for this switch is the “0dB” position, which provides an apparently “flat” response.
Tweeter output may be increased according to the user’s preference, or to compensate for off-axis placement (where the speaker does not directly face the listening position), by setting the switch to the
“+3dB” position.

Public link updated
The public link to your chat has been updated.
Advertisement