Datalogic Memor User manual

Datalogic Memor User manual
Memor™
www.mobile.datalogic.com
World wide Sales Network
available from: www.mobile.datalogic.com/contacts
Datalogic Mobile S.r.l.
Via S. Vitalino, 13
40012 Lippo di Calderara di Reno
Bologna - Italy
Telephone: (+39) 051-3147011
Fax: (+39) 051-3147561
User’s Manual
822000891 (Rev. A)
©2008-2011 Datalogic Mobile S.r.l.
10/11
Datalogic Mobile S.r.l.
Via S. Vitalino 13
40012 - Lippo di Calderara di Reno
Bologna - Italy
Memor™ - User's Manual
Software Version: 4.00
Ed.: 10/2011
© 2008-2011 Datalogic Mobile S.r.l. • All rights reserved. • Protected to the fullest extent
under U.S. and international laws. • Copying, or altering of this document is prohibited
without express written consent from Datalogic Mobile S.r.l.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many
countries, including the U.S.A. and the E.U.
Memor is a registered trademark of Datalogic Mobile S.r.l. In Sweden
All other brand and product names mentioned herein are for identification purposes only
and may be trademarks or registered trademarks of their respective owners.
Datalogic reserves the right to make modifications and improvements without prior
notification.
Datalogic shall not be liable for technical or editorial errors or omissions contained herein,
nor for incidental or consequential damages resulting from the use of this material.
CONTENTS
REFERENCES.....................................................................................v
Conventions .........................................................................................v
Reference Documentation ...................................................................v
Services and Support...........................................................................v
GENERAL VIEW.................................................................................vi
1
1.1
1.2
1.3
1.4
1.5
INTRODUCTION................................................................................. 1
Memor™ Description .......................................................................... 1
Models Description.............................................................................. 2
Package Contents ............................................................................... 4
Inserting a Micro SD Card ................................................................... 5
Accessories......................................................................................... 7
2
2.1
2.2
2.3
BATTERIES AND MAINTENANCE .................................................... 8
Charging the Battery Pack .................................................................. 8
Replacing the Battery Pack ............................................................... 10
Cleaning the Mobile Computer.......................................................... 14
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
CONNECTIONS................................................................................ 15
USB Connection................................................................................ 15
Connection to USB peripherals ......................................................... 17
RS232 Connection ............................................................................ 19
WLAN Connection............................................................................. 20
WPAN Connection ............................................................................ 22
Connection Cables ............................................................................ 23
Wireless and Radio Frequencies Warnings ...................................... 24
4
4.1
USE AND FUNCTIONING ................................................................ 26
Startup............................................................................................... 26
4.1.1
Using the Stylus ................................................................................ 28
4.1.2
4.2
4.3
Using the Joystick ............................................................................. 29
Windows Mobile Welcome Wizard.................................................... 30
Data Capture ..................................................................................... 31
4.3.1
Laser Data Capture ........................................................................... 31
4.3.2
4.4
Imager Data Capture......................................................................... 32
Description of the Keys ..................................................................... 34
4.4.1
4.5
Resetting the Memor ......................................................................... 36
Status Indicators ............................................................................... 39
4.5.1
LED Status ........................................................................................ 39
4.5.2
4.6
Taskbar ............................................................................................. 40
Data Capture Configuration............................................................... 42
4.6.1
Configure........................................................................................... 42
4.6.2
4.7
Capture.............................................................................................. 47
Control Panel .................................................................................... 48
4.7.1
Buttons .............................................................................................. 49
iii
4.7.2
Registry ............................................................................................. 50
4.7.3
Files Admin ....................................................................................... 51
4.7.4
Wireless Communications................................................................. 53
4.7.5
Stylus Calibration .............................................................................. 55
4.7.6
4.8
Volume Settings ................................................................................ 58
Windows Connections....................................................................... 62
4.8.1
Microsoft® ActiveSync®.................................................................... 62
4.8.2
Bluetooth® Manager Device Setup................................................... 64
4.8.3
Windows Mobile Phone..................................................................... 73
4.8.4
4.9
4.10
FTP Server Setup.............................................................................. 74
Backup Directory File Management .................................................. 75
Firmware Update............................................................................... 75
5
5.1
5.2
TECHNICAL FEATURES ................................................................. 76
Technical Data .................................................................................. 76
Reading Diagrams ............................................................................ 80
6
TEST CODES ................................................................................... 82
SAFETY REGULATIONS ................................................................. 86
General Safety Rules ........................................................................ 86
Power Supply .................................................................................... 86
Laser Safety ...................................................................................... 87
LED Class ......................................................................................... 93
Radio Compliance............................................................................. 93
FCC Compliance ............................................................................... 95
RF Exposure Information (SAR)........................................................ 96
Industry Canada Compliance ............................................................ 97
SAR Compliance............................................................................... 98
Patents .............................................................................................. 98
WEEE Compliance............................................................................ 99
China RoHS Pollution Control Logos .............................................. 101
GLOSSARY .................................................................................... 102
INDEX ............................................................................................. 106
iv
REFERENCES
CONVENTIONS
This manual uses the following conventions:
“User” refers to anyone using a Memor™ mobile computer.
“Mobile computer” and "Memor" refer to Memor mobile computer.
“You” refers to the System Administrator or Technical Support person using this
manual to install, configure, operate, maintain or troubleshoot a Memor mobile
computer.
“Single Cradle” refers to the Memor Single Cradle.
REFERENCE DOCUMENTATION
For further information regarding Memor refer to the SDK Help on-Line.
SERVICES AND SUPPORT
Datalogic provides several services as well as technical support through its
website.
Log on to www.mobile.datalogic.com and click on the links indicated for
further information including:
-
PRODUCTS
Search through the links to arrive at your product page where you can
download specific Manuals and Software & Utilities
-
-
SERVICES & SUPPORT
-
Datalogic Services
Agreements
-
Authorised Repair Centres
Warranty
Extensions
and
Maintenance
CONTACT US
E-mail form and listing of Datalogic Subsidiaries
v
GENERAL VIEW
B
D
K
C
I
J
H
A
L
E
M
F
G
A)
B)
C)
D)
E)
F)
QVGA 64K Color Display
Good Read or User
Programmable LED
Charging Status LED
Speaker
Scan Key
Keyboard
G) Microphone
H) Strap with Stylus Holder
I) Laser Safety Label
J) Rear Speaker
K) ON/OFF Power Key
L) Product Label (under battery)
M) Battery Cover
O
P
Q
N
N)
O)
Data Capture/Laser Output
Window *
DC Charger Connector

Remove protective film cover before use
vi
P) Communication/Charger Connector
(through cradle)
Q) Mini USB Communication Connector
(through cable)
INTRODUCTION
1
1.1
1
INTRODUCTION
MEMOR™ DESCRIPTION
The Memor™ mobile computer maximizes a compact and light weight form
factor for ease of use and shirt pocket convenience without compromising
durability. Memor features target applications found in field force automation,
retail stores, manufacturing and warehouses.
The computer architecture of the Memor starts with the industry leading
XScale™ PXA310 microprocessor. Geared for computing requirements of real
time information management and communication. Memory of 128 MB RAM /
256 MB Flash is sized for running multiple simultaneous applications, for
managing large databases or the use of thick applications when off-line
autonomy is required. The memory storage capacity can be increased through
the user accessible Micro SD Card Slot.
The Memor computer architecture can be paired with one of two operating
systems. Microsoft Windows CE 5.0 with Microsoft WordPad and Internet
Explorer 6.0 minimizes the operating system size for faster uploads and more
storage space. Microsoft Windows Mobile 6.1 reduces training requirements
through common Windows’ interfaces and tools including Outlook, Word Mobile,
Excel Mobile, PowerPoint Mobile, One Note Mobile and Internet Explorer Mobile
6.0. A software development kit (SDK) aids in creating applications for both of
these powerful Windows operating systems and alternative environments like
Java Virtual Machine.
Memor provides voice and data wireless communication options to meet the
business need. A speaker and microphone equip the Memor to handle - VoIP
phone calls or push-to-talk conversations. The Summit IEEE 802.11 abg radio’s
optimized transmit power and receiver sensitivity result in superior range with a
tailored user interface for easy configuration and consistent management.
Complimented by a CCX v4 security certification from Cisco, the Memor
provides infrastructure compatibility focused on enterprise requirements for
encrypted communication and seamless roaming. Client side applications
leverage internet protocol connections for hands-free voice picking and push to
talk communications. Bluetooth® Wireless Technology connects headsets,
printers and other peripherals while eliminating cumbersome wires and costly
replacement of broken or damaged cables.
Two scanner options optimize the Memor for the application needs. A laser
scanner tackles intensive applications where speed and a wide depth of field
are essential. Datalogic’s patented Green Spot good read feedback makes
Memor’s laser scanner intuitive while reducing errors. The 2D scan engine
option leverages picture technology to capture a wide range of Linear, Stacked,
and 2D codes while also providing the flexibility to capture a signatures or
drivers license. Digital image decoding software reduces failed reads due to
damaged and poor quality barcodes while enabling the user to scan from almost
any orientation.
Durability ratings protect the computing investment against accidental drops
and occasional exposure to liquids and dust. A touch color display provides an
1
MEMOR™
1
easy to read interface in a wide range of lighting conditions. The phone
keyboard layout and four direction joystick increase associate efficiency. Push
button battery lock provides an easy to locking mechanism for quick, no hassle
battery exchanges. Rechargeable Lithium polymer batteries in two sizes
customize capacity to the application. Charging cradles include a
communication cradles for RS232 and USB. A powered vehicle dock and power
adapter cable extend charging capabilities onto the road.
®
Powered by Wavelink device maintenance and management tools makes the
Memor a simple device to both deploy and maintain. Datalogic Firmware,
Desktop and Configuration Utilities complete the package with unprecedented
ability to customize device configuration to the use environment or process.
Combined these tools streamline deployment and management activities while
providing developer tools to further customize units for specific applications.
1.2
MODELS DESCRIPTION
The brand new Memor is available in different models depending on the options
it is equipped with. All options are listed below:



communication options: 802.11abg radio, Bluetooth®
capture options: laser, imager
compute options: Windows CE, Windows Mobile.
For further details about the Memor models refer to the web site:
http://www.mobile.datalogic.com.
For further information regarding Windows Mobile refer to the website:
http://www.microsoft.com/windowsmobile.
The currently available models are:

944201016 DL-Memor+Batch+1DGS+CE5
Memor, Batch, 128MB RAM/256MB Flash, 23-key Numeric, Std Laser with
Green Spot, CE 5.0

944201038 DL-Memor+802.11+BT+1DGS+CE5
Memor, 802.11 abg CCX V4, Bluetooth, 128MB RAM/256MB Flash, 23-key
Numeric, Std Laser with Green Spot, CE 5.0

944201039 DL-Memor+802.11+BT+2D+CE5
Memor, 802.11 abg CCX V4, Bluetooth, 128MB RAM/256MB Flash, 23-key
Numeric, Std 2D Imager, CE 5.0

944201040 DL-Memor+802.11+BT+1DGS+WM6.1
Memor, 802.11 abg CCX V4, Bluetooth, 128MB RAM/256MB Flash, 23-key
Numeric, Std Laser with Green Spot, WM 6.1
2
INTRODUCTION
1

944201041 DL-Memor+802.11+BT+2D+WM6.1
Memor, 802.11 abg CCX V4, Bluetooth, 128MB RAM/256MB Flash, 23-key
Numeric, Std 2D Imager, WM 6.1
3
MEMOR™
1
1.3
PACKAGE CONTENTS
The Memor package contains:

1 Memor mobile computer

1 AC/DC power supply

1 EU plug adapter

1 UK Plug Adapter

1 standard Mini USB cable

1 CD-ROM Datalogic SDK containing:

Datalogic Applications (DCU, DFU, TCL, Datalogic Mobility
Developer Assistant™)

User Manuals

Support for Wavelink Avalanche

1 CD-ROM Getting Started Disk only for Windows Mobile

1 extensible stylus

1 user’s manual

1 rechargeable standard battery pack + cover

1 hand-strap with stylus holder

1 Windows Mobile/ CE End User License Agreement (depending on
models)
Any other packages will contain the accessories necessary for the Memor
connection to the host computer and to the network: the cradle, one or more
connection cables.
Remove all the components from their packaging; check their integrity and
congruity with the packing documents.
Keep the original packaging for use when sending products
to the technical assistance center. Damage caused by
improper packaging is not covered under the warranty.
CAUTION
Rechargeable battery packs are not initially charged.
Therefore the initial operation to perform is to charge them.
See paragraph 2.1.
NOTE
4
INTRODUCTION
1.4
1
INSERTING A MICRO SD CARD
Memor provides the possibility to add a Micro SD memory storage card. To
access the Micro SD card slot and insert the card, proceed as follows:
1.
Turn off the Memor.
2.
Press the latch release button and pull the latch down, as indicated in
the figure below:
a.
Remove the cover and the battery pack, then open the
Micro SD card slot by pulling up the locking plate:
5
MEMOR™
1
6.
b.
Shift the cardholder to the left and then pull it up; insert the
Micro SD card with the written part upward.
c.
Lock the card into place by pushing the cardholder down
and then shifting it to the right; pull the locking plate down.
Close the battery cover properly, by pressing the latch release button
and pulling the latch down.
To remove the Micro SD card, follow the steps above to access the SD area,
and remove it from its slot.
Follow proper ESD precautions to avoid damaging the SD.
Proper ESD precautions include, but are not limited to, working
on an ESD mat and ensuring that the operator is properly
grounded.
CAUTION Do not force the card. If you feel resistance, remove the card,
check the orientation, and reinsert it.
Do not use the Micro SD card slot for any other accessories.
6
INTRODUCTION
1.5

1
ACCESSORIES
Cradles
94A151111 DL-Memor Single Cradle w Aux. Slot
94A151121 Dock Memor Vehicle w Power Adapter
94A151122 DL-Memor Single Ethernet-Usb_Host Cradle
94A151123 DL-Memor Multi Battery Charger

Batteries
94ACC1368 DL-Memor Standard Battery CVR2
94ACC1367 DL-Memor Large Capacity Battery CVR2

Power Supply
94ACC1324 PG5-30P35 AC/DC Power Supply EU/USA Plug
94ACC1334 PG5-30P35 AUS. Plug Adapter (10pcs)
94ACC1335 PG5-30P35 UK Plug Adapter (10pcs)
94ACC1339 PG5-30P35 EU. Plug Adapter (10pcs)
94ACC1369 DL-Memor Alkaline Adapter CVR2

Cables
94A051016 CAB-421 USB Type A-B-Mini Straight
94A051022 WIN-NET Serial CAB (HRS ST40x-18S-CV)
94A051024 USB A (4 pin F) to Mini A (5 pin M)
94A051966 Cable Memor 12 TO 24 V Power Adapter

Various
94ACC1328 DL-Memor Stylus Pen (10pcs)
94ACC1365 Headset Memor
94ACC1366 Softcase Memor w/Swivel
Use only a Datalogic Mobile-approved power supply and cables.
Use of an alternative power supply will invalidate any approval
given to this device and may be dangerous.
NOTE
7
MEMOR™
2
1
2
BATTERIES AND MAINTENANCE
Rechargeable backup batteries and battery packs are not
initially charged. Therefore the initial operation to perform is
to charge them. See below.
NOTE
Annual replacement of rechargeable battery pack avoids
possible risks or abnormalities and ensures maximum
performance.
CAUTION
2.1
CHARGING THE BATTERY PACK
The battery pack autonomy varies according to many factors,
such as the frequency of barcode scanning, RF usage, battery
life, storage, environmental conditions, etc.
NOTE
The battery icon on the Taskbar indicates when the battery pack is low.
It is possible to recharge the battery pack by connecting the power supply
directly to the Memor.
Alternatively, it is also possible to recharge the battery pack by using a Single
Cradle or the Memor Multi Battery Charger.
Moreover recharging is possible by USB Direct connection with the host
computer, but with longer charging times and only if the mobile computer is off.
During the charging process the LED positioned at the right side of the display
is red constant. Once the charging process has been completed this LED is
green constant (see par. 4.5).
If the battery pack is removed from the mobile computer, it can be recharged by
inserting it into the rear slot of a Single Cradle or the Memor Multi Battery
Charger.
Do not use the Memor until batteries are charged for
minimum 4 hours.
CAUTION
8
BATTERIES AND MAINTENANCE
2
Even if the storage temperature range is wider, In order to
achieve the longest battery life, store the terminal and the
spare batteries between 20 to 30 ºC (68 to 86 ºF).
NOTE
The Batteries must be charged at a temperature ranging
from 0° to +40 °C (+32° to +104 °F).
The battery level may not be displayed correctly for some
minutes after the disconnection if the Memor is
disconnected from power supply before the charging cycle
is completed.
NOTE
The Memor could get warm during charging, this is normal
and does not mean a malfunction.
NOTE
Use only a USB-IF compliant USB port as a charging
source.
NOTE
9
MEMOR™
2
1
2.2
REPLACING THE BATTERY PACK
To correctly replace the battery pack, proceed as follows.
1.
Turn off the Memor.
2.
Press the latch release button and pull the battery latch down as indicated
in the figure below:
3.
Remove the cover and the battery pack.
4.
Install the new battery pack, first insert the bottom (contacts) side, then the
upper side as indicated in the following figure:
5.
Press the latch release button and pull the battery latch down to reinsert
the cover.
10
BATTERIES AND MAINTENANCE
2
As the battery cover is lifted, the mobile computer
automatically shuts off, in order to retain data during the
pack substitution.
CAUTION
11
MEMOR™
2
1
Installing, charging and/or any other action should be done by
authorized personnel and following this manual.
WARNING The battery pack may get hot, explode, ignite, and/or cause
serious injury if exposed to abusive conditions.
If the battery pack is replaced with an improper type, there is risk
of explosion.
Do not place the battery pack in or near a fire or heat; do not
place the battery pack in direct sunlight, or use or store the
battery pack inside unventilated areas in hot weather; do not
place the battery pack in microwave ovens, dryer, high pressure
containers, on induction cookware or similar device. Doing so
may cause the battery pack to generate heat, explode or ignite.
Using the battery pack in this manner may also result in a loss of
performance and a shortened life expectancy.
Use only a Datalogic Mobile approved power supply. The use of
an alternative power supply will void the product warranty, may
cause product damage and may cause heat, explode or ignite.
The area in which the units are charged should be clear of debris
and combustible materials or chemicals.
Do not use the battery pack of this terminal for power devices
different from this mobile computer.
Immediately discontinue use of the battery pack if, while using,
charging or storing the battery pack, the battery pack emits an
unusual smell, feels hot, changes colour or shape, or appears
abnormal in any other way.
Do not short-circuit the battery pack contacts connecting the
positive terminal and negative terminal. This might happen, for
example, when you carry a spare battery pack in your pocket
or purse; accidental short–circuiting can occur when a metallic
object such as a coin, clip, or pen causes direct connection of
the contacts of the battery pack (these look like metal strips on
the battery pack). Short–circuiting the terminals may damage
the battery pack or the connecting object.
Do not apply voltages to the battery pack contacts.
Do not pierce the battery pack with nails, strike it with a
hammer, step on it or otherwise subject it to strong impacts or
shocks.
12
BATTERIES AND MAINTENANCE
2
Do not disassemble or modify (i.e. bend, crush or deform) the
battery pack. The battery pack contains safety and protection
devices, which, if damaged, may cause the battery pack to
WARNING generate heat, explode or ignite.
In case of leakage of liquid from the battery, avoid contact with
liquid the skin or eyes. If the contact occurs, immediately wash
the affected area with water and consult a doctor.
Do not solder directly onto the battery pack.
Do not expose the battery pack to liquids.
Avoid any knocks or excessive vibrations. If the device or the
battery is dropped, especially on a hard surface, you should take
it to the nearest Authorised Repair Centre for inspection before
continuing to use it.
Do not replace the battery pack when the device is turned on.
Do not remove or damage the battery pack’s label.
Do not use the battery pack if it is damaged in any part.
Battery pack usage by children should be supervised.
Collect and recycle waste batteries separately from the device
in comply with European Directive 2006/66/EC, 2002/95/EC,
2002/96/EC and subsequent modifications, US and China
regulatory and others laws and regulations about environment.
NOTE
In order to guarantee an adequate operating autonomy,
when replacing the battery pack the mobile computer
checks the battery energy level. If the battery is not
sufficiently charged, Memor does not turn on (when
pressing the ON/OFF key).
In this case, either substitute the battery pack with a
charged one (sufficiently charged) or insert Memor into a
powered cradle or plug it into the direct power supply.
To achieve the best battery life, turn off the radios not in
use.
NOTE
13
MEMOR™
2
1
2.3
CLEANING THE MOBILE COMPUTER
Periodically clean the Memor with a slightly dampened cloth.
14
CONNECTIONS
3
3
CONNECTIONS
3.1
USB CONNECTION
You can use any standard mini USB cable to directly connect the Memor to a
host computer to transfer data through the USB interface.
A
C
B
Key:
A)
Host Computer
B)
Standard Mini USB cable
C)
Memor
Connection through the cable is compliant to 2.0 USB standard.
NOTE
The Single Cradle can be connected to the Host by any standard mini USB
cable to transfer data through the USB interface.
A
C
B
D*
Key:
A)
Host Computer
C)
Single Cradle
B)
Standard Mini USB cable
D)
*Power Supply (only necessary
for battery charging)
In this case the power supply is only necessary for battery charging. Insert the
power supply plug into the power jack on the base of the cradle and attach the
power supply to a power outlet.
15
3
1
MEMOR™
Connection through the cradle is compliant to 2.0 USB standard.
NOTE
The actual data transfer speed can be appreciably lower than the
maximum theoretical speed.
NOTE
16
CONNECTIONS
3.2
3
CONNECTION TO USB PERIPHERALS
You can use a standard A (4 pin female) to mini A (5 pin male) USB cable to
connect the Memor to a keyboard or a memory. For all these devices maximum
current withdrawal must be below 100mA.
B
A
C
Key:
A
Keyboard with USB interface
B
Memor
C 94A051024 (Standard A to Mini A
USB cable)
B
A
C
Key:
A USB hard drive/ external C 94A051024 (Standard A to Mini A
memory source
USB cable)
B
Memor
Connect first the USB peripheral to the cable, and then the cable
to the Memor.
NOTE
Memor works with most of mentioned USB peripherals. In any
case, we can’t guarantee good operations with all devices
available on market place.
NOTE
Connection is compliant to 1.1 USB standard.
NOTE
17
3
1
MEMOR™
The actual data transfer speed can be appreciably lower than the
maximum theoretical speed.
NOTE
18
CONNECTIONS
3.3
3
RS232 CONNECTION
You can use a cable to directly connect the Memor to a host computer to
transfer data through the RS232 interface.
A
C
B
Key:
A)
Host Computer
B)
94A051022 WIN-NET
(HRS ST40X-18S-CV)
C)
Memor
The Single Cradle can be connected to the Host by any standard 9-pin serial
null-modem cable for RS232 communications.
Once the Host has been turned on, insert the Memor mobile computer into the
cradle.
A
B
C
D
Key:
A)
Host Computer
C)
Single Cradle
B)
94A051020 CAB-427
Null-Modem
D)
*Power Supply (only necessary for
battery charging)
In this case the power supply is only necessary for battery charging. Insert the
power supply plug into the power jack on the base of the cradle and attach the
power supply to a power outlet.
CAUTION
If the mobile computer supports Windows Mobile, before plugging
the RS232 cable you have to check the 'COM1 Enable' option on
the 'System, Configuration' window. (Start -> Programs -> System
Configuration).
19
MEMOR™
3
1
3.4
WLAN CONNECTION
Memor 802.11 abg radio models can communicate with the host using the onboard radio frequency component and an Access Point connected to the host
computer.
For models using the 802.11 abg radio, you can find information about the
applet for radio configuration: http://www.summitdatacom.com/SCU.htm.
To launch this utility you can tap the specific icon if it's visible on the taskbar or:
1. On Windows CE devices, you can open Connections folder or Control
Panel from desktop and select the 'Summit Client Utility' icon.
2. On Windows Mobile devices, you can select the menu item: Start>Programs->Summit and tap the ‘Summit Client Utility’ icon.
A
B
C
Key:
20
A)
Memor
B)
Access Point
C)
Host – Application Server
CONNECTIONS
3
802.11 abg radio module is on by default, in order to avoid
wasting energy, you can switch it off using the Wireless
Communications applet.
NOTE
NOTE
NOTE
Suspending the terminal powers off the 802.11 abg radio and
drops the radio connection. When the terminal resumes,
depending on the radio power mode and security protocol
selected, it may take up to 30 seconds for the 802.11 abg radio
driver to re-associate the radio to the network.
Area coverage and radio performance may vary, due to
environmental conditions, access points types or interference
caused by other devices (microwave ovens, radio transmitters,
etc.)
In case of heavy usage the Memor could get warm, this is normal
and does not mean a malfunction.
NOTE
21
MEMOR™
3
1
3.5
WPAN CONNECTION
Memor mobile computer models with Bluetooth can communicate with other
Bluetooth enabled devices, such as a printer, within a range of 10 m, using
the onboard Bluetooth module.
B
A
Key:
A)
Memor
B)
Bluetooth printer
NOTE
NOTE
In order to avoid wasting energy, the Bluetooth® module is
off by default. If you need to have Bluetooth® working, the
module must be powered on using the Wireless
Communications applet (see par. 4.7.4), and perform the
Discovery procedure (see par. 4.8.2).
Suspending the terminal powers off the Bluetooth radio and
drops the piconet (Bluetooth connection). When the terminal
resumes, it takes approximately 10 seconds for the
Bluetooth radio driver to re-initialize the radio.
Area coverage and Bluetooth radio performance may vary,
due to environmental conditions or interference caused by
other devices (microwave ovens, radio transmitters, etc.), etc.
NOTE
22
CONNECTIONS
3.6

3
CONNECTION CABLES
RS232 Direct Connection:
94A051022 WIN-NET SERIAL CAB (HRS ST40x-18S-CV)
Datalogic Memor™
side
9
RXD
TXD
TXD
RXD
CTS
RTS
10
11
RTS
CTS
12
3
HOST/PC side
9-pin (female)
2
7
8
DSR
13
DCD
DTR
DTR
DCD
4
15
1
14
DSR
6
8
7

RI
RI
GND
GND
9
5
Power Supply Polarity:
VEXT
GND
23
MEMOR™
3
1
3.7
WIRELESS AND RADIO FREQUENCIES WARNINGS
WARNING
Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications or
attachments could damage the product and may violate
laws and regulations.
Most modern electronic equipment is shielded from RF
signals. However, certain electronic equipment may not
be shielded against the RF signals generated by Memor.
WARNING
WARNING
Datalogic recommends persons with pacemakers or other
medical devices to follow the same recommendations
provided by Health Industry Manufacturers Associations for
mobile phones.
Persons with pacemakers:

Should ALWAYS keep this device more than twenty five
(25) cm from their pacemaker and/or any other medical
device;

Should not carry this device in a breast pocket;

Should keep the device at the opposite side of the
pacemaker and/or any other medical device;

Should turn this device OFF or move it immediately
AWAY if there is any reason to suspect that interference
is taking place.

Should ALWAYS read pacemaker or any other medical
device guides or should consult the manufacturer of the
medical device to determine if it is adequately shielded
from external RF energy.
In case of doubt concerning the use of wireless devices
with an implanted medical device, contact your doctor.
WARNING
WARNING
24
Turn this device OFF in health care facilities when any
regulations posted in these areas instruct you to do so.
Hospitals or health care facilities may use equipment that
could be sensitive to external RF energy.
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should also
consult the manufacturer of any equipment that has been
added to your vehicle.
CONNECTIONS
WARNING
WARNING
3
An air bag inflates with great force. DO NOT place
objects, including either installed or portable wireless
equipment, in the area over the air bag or in the air bag
deployment area. If vehicle’s wireless equipment is
improperly installed and the air bag inflates, serious
injury could result.
Turn off the device when in any area with a potentially
explosive atmosphere. Observe restrictions and follow
closely any laws, regulations, warnings and best practices on
the use of radio equipment near fuel storage areas or
distribution fuel areas, chemical plants or where some
operation involves use of explosive materials.
Do not store or carry flammable liquids, explosive gases or
materials with the device or its parts or accessories.
Areas with a potentially explosive atmosphere are often, but
not always, clearly marked or showed.
Sparks in such areas could cause an explosion or fire,
resulting in injury or even death.
To safely disable the radio modules (WiFi/BT) do not
power off the mobile computer, but use the Wireless
Communications applet (see par. 4.7.4).
WARNING
25
MEMOR™
4
1
4
USE AND FUNCTIONING
The use of the Memor depends on the application software loaded. However
there are several parameters that can be set and utilities that can be used to
perform some basic functions such as data capture, communications, file
management, etc.
4.1
STARTUP
The Memor turns on when the battery pack or the external supply is inserted.
After the battery pack is installed, use the [ON/OFF] key to turn the mobile
computer on and off.
As soon as the mobile computer is on, the Windows CE 5.0/ Windows Mobile
desktop configuration will appear on the screen. Wait a few seconds before
starting any activity so that the mobile computer completes its startup
procedure.
Windows CE Desktop
Windows MobileToday Screen
Use the stylus (par. 4.1.1) or joystick (par. 4.1.2) as suggested to select icons
and options.
The mobile computer goes into power-off (low power with display and keyboard
backlight off), when it is no longer used for more than a programmable timeout,
which is defined in the POWER applet of the Control Panel. In this mode it can
be awakened (resuming operation) by the [ON/OFF] key.
26
USE AND FUNCTIONING
4
The mobile computer can also be awakened or turned off by
the application program.
NOTE
27
MEMOR™
4
1
4.1.1
Using the Stylus
The stylus selects items and enters information. The stylus functions like a
mouse.
Tap:
Touch the screen once with the stylus to open items and
select options (Windows Mobile only).
Double Tap:
Touch the screen twice with the stylus to open items and
select options (Windows CE only).
Drag:
Hold the stylus on the screen and drag across the screen to
select text and images. Drag in a list to select multiple items.
Tap-andhold:
Tap and hold the stylus on an item to see a list of actions
available for that item. On the pop-up menu that appears, tap
the action you want to perform.
To recalibrate the touch screen use the Stylus Applet (see par. 4.7.5)
Use only original Datalogic styluses supplied with the product
itself.
CAUTION
In
harsh
applications,
use
of
screen
protectors
should be taken into consideration, in order to extend the
touch screen operating life.
To prevent damage to the screen, do not use sharp devices or
any device other than the Datalogic Mobileprovided stylus.
Do not apply not necessary high pressures on the screen.
For applications where an intensive use of the touch screen is
foreseen, please consider that touch screen components are
subject to progressive wear.
28
USE AND FUNCTIONING
4.1.2
4
Using the Joystick
The joystick selects items and enters information. The joystick can work like the
directional arrow keys of a PC keyboard or can function like a mouse and
control the mouse pointer. It is possible to switch between the two functioning
modes by pressing blue modifier + BKSP keys in sequence.
Arrow Keys Mode
(default):
Move in the four directions: move forwards, backwards,
upwards or downwards within text fields, scroll through a
Menu list or browse among folder files.
Press down: selects the current function (like the
Enter key).
Mouse Mode:
Move in the four directions: move the mouse pointer
forwards, backwards, upwards or downwards.
Press down: like the left click of the mouse.
During a phone call, you can set the speaker volume by moving
the joystick up and down.
NOTE
29
MEMOR™
4
1
4.2
WINDOWS MOBILE WELCOME WIZARD
In Windows Mobile, at the very first Memor startup, following a clean boot or
following a registry restore to default values, the mobile computer startup (see
par. 4.1 is preceded by the Welcome Wizard.
Welcome Wizard Screen
The Welcome Wizard allows the user to calibrate the touch screen (see par.
4.7.5) and to configure an email account and a password to protect the terminal.
Touch Screen Calibration Screen
30
USE AND FUNCTIONING
4.3
4
DATA CAPTURE
To capture data first of all select the barcode icon on the bottom-right side of the
display and tap the 'Capture' menu item then proceed with the following
directions.
To configure and enable data capture parameters refer to par. 4.6.
4.3.1
Laser Data Capture
To scan barcodes, point the Memor laser model onto the code from a distance
within the reading range while pressing the SCAN key.
The lighted band emitted by the laser must completely intercept the barcode as
shown in the figure below.
If the scan has taken place correctly:
-
the Good Read LED gets constant Green for a configurable time;
if enabled, the GoodReadSound emits an acoustic signal;
if enabled, the GreenSpot projects a green spot onto the bar code image.
Remove the protective film cover over the Laser Output
Window before use.
NOTE
31
MEMOR™
4
1
4.3.2
Imager Data Capture
The Memor Imager captures a picture of the entire bar code. The omnidirectional scanning does not require that the operator orient the bar code to
align with the scan pattern.
To read a 1D or 2D code, simply point the Memor Imager model onto the code
and press the SCAN Key.
The Memor Imager uses an intelligent aiming system pattern, similar to those
on cameras, indicating the field of view, which should be positioned over the
code:
Aiming System
If the aiming system pattern is centered over the entire symbology as shown in
the following figure, either wait for the timeout or release the Scan key to
capture the image.
A red beam illuminates the code, which is captured and decoded. You will get a
good read.
32
USE AND FUNCTIONING
Linear barcode
4
2D Matrix symbol
ÌBX3ÉÎ
Relative Size and Location of Aiming System Pattern
The field of view changes its size as you move the reader closer or farther away
from the code. The field of view indicated by the aiming system pattern will be
smaller when the Memor Imager is closer to the code and larger when it is
farther from the code.
Symbologies with smaller bars or elements (mil size) should be read closer to
the unit. Symbologies with larger bars or elements (mil size) should be read
farther from the unit. (See par. 5.1 for further details).
If the scan has taken place correctly:
-
the Good Read LED gets constant Green for a configurable time;
if enabled, the GoodReadSound emits an acoustic signal.
33
MEMOR™
4
1
4.4
DESCRIPTION OF THE KEYS
The Memor provides a 23-key alphanumeric keyboard + ON/OFF key + joystick.
The following image shows this keyboard.
34
USE AND FUNCTIONING
4
Main Keys Function
KEY
FUNCTION
It starts barcode data capture.
The joystick lets you move forwards, backwards,
upwards or downwards, scroll through a Menu list,
browse among folder files or select functions if
pressed down.
It can work in two functioning modes: Arrow Keys
Mode and Mouse Mode. It’s possible to switch
between them by pressing blue modifier + BKSP
keys in sequence (see par. 4.1.2)
Yellow modifier: when pressed before a standard
key, it enables the character or function printed in
yellow above the key.
Blue modifier: when pressed before a standard key,
it enables the character or function printed in blue
above the key.
It powers the Memor ON or OFF. It is placed on the
upper left side of the terminal.
The ALPHA key is used to alternate numeric and
alphanumeric use of the 10 numeric keys.
Special Function Icons
ICON
FUNCTION
After a yellow modifier key press, it opens the Start menu.
After a yellow modifier key press, it opens the file manager.
After a yellow modifier key press, it switches ON/OFF the
display backlight.
After a blue modifier key press, it switches ON/OFF the
keyboard backlight.
After a blue modifier key press, it locks and unlocks the keyboard.
35
MEMOR™
4
1
4.4.1
Resetting the Memor
Windows CE
There are several reset methods for the Memor.
A warm boot terminates an unresponsive application and clears the working
RAM, but preserves both the file system and the registry.
A cold boot forces all applications to close and clears working RAM and files not
resident on the persistent flash memory. Registry is restored from persistent
memory if available or returned to factory default.
A Clean Boot restores the Memor to factory configuration: registry and file
system return to factory default.
WARM BOOT
A warm boot closes all applications, clears the working RAM, but preserves the
file system and registry. If an application "hangs" initiate a warm boot to
terminate the application.
To perform a warm boot, press these keys simultaneously:
COLD BOOT
A cold boot is a complete reset of the Memor in which all applications are
forcibly closed and RAM is completely cleared. Registry is restored from
persistent memory if a saved copy is available (see 4.7.2) and RAM file system
completely erased. You will lose any applications and data (registry too) which
are not stored in persistent flash memory.
A cold boot is necessary when the Windows CE operating system locks up and
the warm boot command does not work.
To perform a cold boot, press these keys simultaneously:
CLEAN BOOT
A clean boot is a cold boot that causes the device to be restored to factory
configuration. The Memor will reset to its factory configuration, clear the working
RAM and initialize the file system. You will lose any applications and data stored
in persistent flash memory. At the next startup the system will ask to recalibrate
the touch screen.
To perform a clean boot, follow these steps:
1.
2.
3.
4.
36
Perform a Cold Boot (see Cold Boot).
Quickly release all the keys when the screen goes black.
Within 1 second press and hold down the Esc and 0 keys until the left
orange led starts blinking.
Release the Esc and 0 keys.
USE AND FUNCTIONING
5.
4
Enter 1 to proceed with the Clean Boot sequence. Enter 0 to cancel the
Clean Boot and proceed with a Cold Boot.
Warm Boot Cold Boot
REGISTRY
Preserved
Restored from flash (if available)
Flash Disk
(Backup Folder)
RAM File
System
Preserved
Preserved
Preserved
Reinitialized (factory default)
Clean
Boot
Factory
default
Clean
disk
Factory
default
Before performing a reset, it is recommended to:
CAUTION
-
execute a system backup to keep your more important
files and applications persistent. See par. 4.9;
-
save the registry to non-volatile memory to guarantee
the persistence of the Windows configuration. See par.
4.7.2.
Windows Mobile
There are several reset methods for the Memor.
A warm boot terminates an unresponsive application and clears the working
RAM, but preserves the file system. Registry are restored from persistent
memory if available or returned to factory default.
A cold boot forces all applications to close reinitializing completely the system. It
clears the working RAM, but the file system is preserved. Registry is restored
from persistent memory if available or returned to factory default.
A clean boot restores the Memor to a clean configuration: both the registry and
the file system return to a clean status that conform to factory default, unless the
user has installed an additional package.
Warm Boot
A warm boot closes all applications and clears the working RAM, but preserves
the file system. Registry are restored from persistent memory if a saved copy is
available (see Registry Applet, par. 4.7.2) or returned to factory default. If an
application hangs, initiate a warm boot to terminate the application.
To perform a warm boot, press and hold the following keys simultaneously:
Cold Boot
A cold boot is a complete reset of the Memor in which all applications are
forcibly closed and the RAM is completely cleared. Registry is restored from
persistent memory if a saved copy is available (see Registry Applet, par. 4.7.2).
Applications and data stored on file system are preserved. A cold boot is
37
MEMOR™
4
1
necessary when the Windows Mobile operating system locks up and the warm
boot command does not work.
To perform a cold boot, press and hold the following keys simultaneously:
Clean Boot
A clean boot is a cold boot that causes the device to be restored to a clean
configuration. The Memor will be reset to its factory configuration only if the user
has not installed any additional package. Please note that you will lose any
applications and data stored in persistent flash memory.
To perform a clean boot, follow these steps:
1.
2.
3.
4.
5.
Perform a Cold Boot (see Cold Boot).
Quickly release all the keys when the screen goes black.
Within 1 second press and hold down the Esc and 0 keys until the left
orange led starts blinking.
Release the Esc and 0 keys.
Enter 1 to proceed with the Clean Boot sequence. Enter 0 to cancel the
Clean Boot and proceed with a Cold Boot.
Warm Boot
REGISTRY
File
System
38
Restored
flash
Preserved
Cold Boot
from Restored
flash
Preserved
Clean Boot
from Clean configuration
user config)
(no
Clean Installation (no user
files)
USE AND FUNCTIONING
4.5
4.5.1
4
STATUS INDICATORS
LED Status
The Memor provides two different LEDs signaling the mobile computer status.
LED
STATUS
Good Read and
General Purpose
(left side)
Green
It is constant for a configurable time
to signal that a successful read has
occurred.
Green/Red
It is also available to the application
program.
Green constant
It is constant once the charging
process has been completed.
Red constant
It is constant while charging.
Off
if the charging stops due to high
temperature, failures etc.
Orange
it is constant while in pre-charge
status
Charging Status
(right side)
39
MEMOR™
4
1
4.5.2
Taskbar
The Taskbar provides information about the time, the battery level, the keyboard
function, and the decoding status.
ICONS
DESCRIPTION
Time and Battery
Icons
It displays the time.
In Windows CE, they are representative of five different
icons indicating the battery level. The icon is partially
green when the power left is >20% and partially red
colored when the power left is <20%.
In Windows Mobile, it displays the system battery
status.
It indicates that the battery is charging (Windows CE).
It indicates that the battery is charging (Windows
Mobile).
Keyboard Status
Icons
It indicates that the blue FUNC key has been pressed
and is going to affect the next key press.
It indicates that the yellow FUNC key has been pressed
and is going to affect the next key press.
It indicates that the ALPHA key has enabled the
selection of the characters printed in orange.
It indicates the NUMERIC key selection, the ALPHA key
has not been pressed.
It indicates that the ALPHA key has enabled the
selection of the characters printed in orange and the
Capslock is active.
It indicates that the keyboard is locked.
Decoding Status
Icons
It indicates that the decoder is active (green), not active
(grey).
40
USE AND FUNCTIONING
4
Windows CE Taskbar
Windows Mobile Taskbars
41
MEMOR™
4
1
4.6
DATA CAPTURE CONFIGURATION
From the Windows CE Taskbar, tap the "Decoding" icon to open a drop–down
menu. Decoding can also be accessed from the Control Panel.
By selecting the Info item from this drop-down menu you can access information
about the Scanner and the Software; the Configure item opens the configuration
applet (Data Capture Configuration Window), while Capture accesses the data
capture applet (Data Capture Window), which enables code reading.
The last menu item (Wedge) enables Wedge Emulation.
From the Windows Mobile Start menu, tap Settings -> System -> Decoding. The
"Decoding" icon opens the configuration applet (Data Capture Configuration
Window).
Windows CE
4.6.1
Windows Mobile
Configure
The Configuration applet contains the barcode scanning configuration
parameters in a directory tree structure. The available barcode parameters are
divided into two groups: Reader Parameters and Scan Parameters.
The Reader Parameters depend on the type of scanner module installed on the
mobile computer and allow barcode configuration (i.e. enable/disable Code 39,
check digit control, etc.).
The Scan Parameters are common to all scanner modules and allow control of
the scanning device (i.e. beeper control, LED control, laser timeout, etc.).
Each Data Capture screen window corresponds to a branch of the tree, and the
name of the current branch is displayed at the bottom of each screen window.
42
USE AND FUNCTIONING
4
Data Capture Configuration Window
The screen format shows two columns where the left column indicates branches
or parameters. Branches have three dots in the right column (...). You can
navigate through the tree structure using the stylus or keyboard arrows directly
on the item field or from the menu.
Parameters have their corresponding current values in the right column. You
can edit parameter values using the stylus or keyboard arrows directly on the
item field or from the menu. To change a value for example, select the line of
the value to be changed, choose Edit from the Parameter Menu then choose a
new value from the values listed in the box (see following figures).
Selecting Data Capture Setup Parameters
Alternatively using the stylus, you can tap once directly on the value on the right
column; continue tapping until the desired value is reached.
To activate a new configuration select the File ->Save Menu to send the new
configuration to the barcode decoding software and save the new configuration.
This will save the configuration to non-volatile memory preventing loss at the
next system reset.
43
4
1
MEMOR™
Reader Parameters
The barcode reading parameters and values are dependent upon the type of
scanner module mounted in your mobile computer. For a detailed list of
parameters and of their configuration procedures, please refer to the SDK Help
file on the CD.
Scan Parameters
The Scan Parameters are common to all scanner modules and allow control of
the scanning device. The Scan parameters are described as follows:
ScanTimeout: the maximum time, in milliseconds, during which the scanner
remains on without decoding any barcode.
BeepType: if set to dual tone, the good read beep is a sequence of high and
low pitch sounds. If set to monotone, the beep is a single pitch sound.
BeepDuration: the time interval, in milliseconds, during which the beeper will
sound when the scanner reads a code. To disable the beeper, set this value to 0.
BeepFrequency: determines the frequency in Hertz of the beeper.
GoodReadSound: is the beep sound emitted when the scanner reads a code.
LedDuration: the length of the good-read led pulse, in milliseconds.
LedPulses: the number of times the good-read led pulse is emitted when the
scanner reads a code.
ContinuousMode: disables the effect of the ScanTimeout parameter.
KeyboardEmulation: if enabled all scanned data are transformed into keyboard
events and can therefore be displayed and saved to a file as if input from the
mobile computer keyboard.
SoftTrigger: when enabled, the laser can be turned on/off by the application
software.
ScanAlwaysOn: enables the scanner for barcode reading independently from
the application software.
GreenSpotDuration: determines the duration (measured in milliseconds) of the
green spot feedback, which provides a “good read” green dot directly on the
code, where the operator usually tends to be looking.
NotPrintableChar: if set to “Remove”, all not printable characters included in
the scanned data are deleted and the final barcode will include only printable
characters.
ScanButton: enables/disables the scan button. If the scan button is disabled,
the reader can be triggered under software control.
44
USE AND FUNCTIONING
4
Default Settings
The following tables contain the default values for the major barcode setup
parameters, according to the type of scan engine mounted on the mobile
computer. For a complete list of parameters and of their configuration
procedures, please refer to the SDK Help file on the CD.
SCAN PARAMETERS
LASER MODELS
ScanTimeout
BeepType
BeepDuration
BeepFrequency
GoodReadSound
5000
Dual tone
20
2000
Beep
LedDuration
LedPulses
ContinuousMode
KeyboardEmulation
SoftTrigger
ScanAlwaysOn
GreenSpotDuration
NotPrintableChar
ScanButton
200 ms
1
Disabled
Enabled
Enabled
Disabled
1000
Leave
Enabled
BARCODE SYMBOLOGY
SPECIFIC READER PARAMETERS
UPC A
UPC E
EAN 8
EAN 13
UPC/EAN/JAN
Code 39
Code 39 Full ASCII
Code 32
2/5: Interleaved
2/5: Industrial
2/5: Matrix
Code 128
EAN 128
Codabar
LASER MODELS
Enabled
Enabled
Enabled
Enabled
Not available
Enabled
Disabled
Disabled
Enabled
Disabled
Disabled
Enabled
Enabled
Disabled
IMAGER
MODELS
Not available
Not available
Not available
Not available
Beep.wav
200 ms
1
Disabled
Enabled
Enabled
Disabled
Not available
Leave
Enabled
IMAGER
MODELS

Enabled
Enabled
Disabled
Not available
Enabled
Not available
Not available
Enabled
Disabled
Enabled

In the Imager models these codes may only be enabled or disabled as a group by the
UPC/EAN/JAN family selection (see a few lines below).
45
MEMOR™
4
1
BARCODE SYMBOLOGY
SPECIFIC READER PARAMETERS
MSI
Plessey
Code 93
Code 11
GS1 Databar
GS1 Databar Omnidirectional
GS1 Databar General
GS1 Databar Limited
GS1 Databar Expanded
PDF - 417
Data Matrix
QR
POSTNET
PLANET
Japan Post
Australia Post
KIX Code
Royal Mail Code (RM4SCC)

LASER MODELS
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Not available
Disabled
Disabled
Not available
Not available
Not available
Not available
Not available
Not available
Not available
Not available
Not available
IMAGER
MODELS
Not available
Not available
Enabled
Not available
Enabled
Not available
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Disabled
These codes may be enabled individually but are disabled as a group.
46
USE AND FUNCTIONING
4.6.2
4
Capture
The Data Capture applet (Capture) enables code reading.
Data Capture Window
Data Capture can also be enabled through the Configuration applet by selecting
File ->Scanner from the main menu, or by enabling the parameter Scan Always
On in the Scan Parameters branch.
Enabling the Data Capture
47
MEMOR™
4
1
4.7
CONTROL PANEL
From the Windows CE Desktop, double tap on the "My Device" icon and then
double tap on the "Control Panel" icon to open the Windows CE control panel
main window. The Control Panel can also be launched from Start ->Settings >Control Panel.
APPLET programs are displayed as icons; one icon corresponds to each
APPLET.
Windows CE Control Panel
From the Windows Mobile Start menu, tap Settings. A three tab dialog opens:
Personal, System, Connections.
APPLET programs are displayed as icons; one icon corresponds to each
APPLET.
Windows Mobile Control Panel
48
USE AND FUNCTIONING
4.7.1
4
Buttons
To configure the way up/down and the rest of keys control repeats, use the
Up/Down Control applet (Start -> Settings -> Personal -> Buttons -> Up/Down
Control).
Windows CE Buttons Icon
Windows Mobile Buttons Icon
You can also select to wake up the terminal by the SCAN key.
To assign desired applications to be launched by one of the keys, refer to DFU
Reference Guide.
49
MEMOR™
4
1
4.7.2
Registry
The REGISTRY ADMIN applet provides management of Windows CE 5.0/
Windows Mobile registry.
From the Windows CE control panel main window, select the REGISTRY
ADMIN applet by double tapping the Registry Admin icon.
From the Windows Mobile Start menu, tap Settings -> System ->Registry
Admin. Select the REGISTRY ADMIN applet by tapping the Registry Admin
icon.
The Registry Administration Main window appears. Two functions are available:
-
Save Registry allows permanently saving the Windows configuration
(example: custom configuration of screen desktop background color, or
network adapter configuration) to non-volatile memory (SAVE button).
-
Restore Default Registry allows restoring the initial factory default
configuration (Restore Default button). After restoring the factory default
configuration, you must perform a warm boot.
Saving the registry to non-volatile memory guarantees the persistence of the
Windows configuration in case of battery pack replacement, cold boot or warm
boot on Windows Mobile.
Registry Administration Window
50
USE AND FUNCTIONING
4.7.3
4
Files Admin
The FILES ADMIN applet enables control of the permanence of files in the
Windows CE System Folder.
Because Windows Mobile mounts the entire file system in persistent store
(rather than using RAM), it provides both users and applications with a reliable
storage platform even in the absence of battery power. The FILES ADMIN
applet is therefore not necessary.
Two functions are available on the Files Admin Main window by means of two
buttons:
Files Admin Main Window
Save Session: with this button all files will be permanently saved in the
\Windows directory in non-volatile memory. This function guarantees the steady
maintenance of every file produced during the current working session - even of
sub-directories and relevant files - with the exception of the files belonging to
the FLASH image.
These current working session files will be backed-up in the \Backup\Windows
directory.
At the next cold boot, the files previously saved in the \Backup\Windows
directory will be restored to the Windows directory (see par. 4.9).
Safe Setup: with this button, the installation of software programs will be saved
to non-volatile memory (Backup directory). Before doing this, it will be checked
that the Backup directory has enough space to save the files. If the directory
space is not enough, an error message will be shown and the program will exit
the Safe Setup function.
Two activating procedures are available for Safe Setup:
51
MEMOR™
4
1
-
Select an installation file (for example, a .CAB cabinet file) from the Safe
Setup mask.
Safe Setup First Mask
Then select \Windows or a relevant sub-directory in the path box. Then,
Safe Setup will recognize the new files and directories present in the
\Windows directory, and will copy them to the \Backup\Windows directory.
At the next cold boot, these files will be restored (see par. 4.9).
-
Simply skip the first mask either by closing it or by pressing the ESC key.
When it closes, a new mask will pop up: it will enable any type of
®
installation (even remote ones like ActiveSync installations). Make sure
the installation directory is \Windows or one of its sub-directories. After
installation, tap OK: Safe Setup will save the new files in the
\Backup\Windows directory.
Safe Setup Second Mask
52
USE AND FUNCTIONING
4.7.4
4
Wireless Communications
The WIRELESS COMMUNICATIONS applet provides management of the
802.11 abg radio, the Bluetooth modules.
Windows CE Wireless Communications
Icon
Windows Mobile Connectivity Icon
If the mobile computer supports Windows CE, select the WIRELESS
COMMUNICATIONS applet by double tapping the Wireless Communications
icon. The following window will appear:
Wireless Communications Window
If the mobile computer supports Windows Mobile, the Wireless Manager
application manages access to wireless connections.
The 'Wireless Manager' is a sort of 'Control Panel' for bluetooth and phone
modules. From here it's possible to turn on or off bluetooth and phone radio
stacks.
Open the Wireless Manager by tapping Start -> Settings -> Connections ->
Wireless Manager, or by tapping the Connectivity icon located at the top of the
screen. The following window will appear:
53
MEMOR™
4
1
Windows Mobile Wireless Communications Window
54
USE AND FUNCTIONING
4.7.5
4
Stylus Calibration
You might need to recalibrate the touch screen (i.e. when you attempt to select
one item with the stylus, another item is erroneously selected).
To recalibrate the touch screen on Windows CE, complete the following steps:
1. Select Start > Settings > Control Panel > Stylus to open the Stylus
Properties dialog as shown in Figure 1.
2. Adjust Double-Tap sensitivity if needed or desired.
3. Select the Calibration tab to open the Calibration application.
Figure 1
4.
5.
6.
7.
Tap Recalibrate to open the Calibration screen shown in Figure 2.
Carefully press and briefly hold stylus on the center of the target. Repeat
as the target moves around the screen. Press the <ESC> key to cancel the
stylus calibration.
Press the <ENTER> key or tap the screen to accept the new calibration
settings. Press the <ESC> key to keep the old settings.
New calibration settings are persistently saved in registry.
55
MEMOR™
4
1
Figure 2
To recalibrate the touch screen on Windows Mobile, complete the following
steps:
1.
Select Start > Settings > System > Screen to open the Screen
Settings dialog as shown in Figure 3.
Figure 3
2.
3.
4.
5.
56
Tap Align Screen to open the Calibration screen shown in Figure 4.
Carefully press and briefly hold stylus on the center of the target. Repeat
as the target moves around the screen. Press the <ESC> key at any time
to cancel the stylus calibration.
By completing the calibration procedure you implicitly accept the new
calibration settings.
New calibration settings are persistently saved in registry.
USE AND FUNCTIONING
4
Figure 4
Startup stylus calibration on Windows CE
When starting the terminal, a stylus calibration screen comes up if valid
calibration settings are not available. This happens in the following
circumstances:
1.
2.
3.
4.
At the first startup of the terminal.
After restoring registry default settings using the applet Registry Admin
and performing a warm boot.
After a Clean Boot.
After a Firmware Update (see par. 4.10).
Startup stylus calibration on Windows Mobile
When starting the terminal, a Welcome Wizard (with Stylus Calibration) comes
up if valid calibration settings are not available. This happens in the following
circumstances:
1. At the first startup of the terminal.
2. After restoring registry default settings using the applet Registry Admin
and
performing a boot.
3. After a Clean Boot.
57
MEMOR™
4
1
4.7.6
Volume Settings
Windows CE
From the Windows CE control panel main window, select the Audio applet by
double tapping the ‘Audio’ icon:
The Audio applet allows to set the recording volumes of the main microphone
and of the headset microphone. Also, it allows to set the headset volume when
the user is listening to an audio file.
Audio Window
58
USE AND FUNCTIONING
4
From the Windows CE control panel main window, select the Volume & Sounds
applet by double tapping the Volume & Sounds icon:
The Volume & Sounds applet allows to manage the audio features of the rear
speaker and appears as follows:
Volume & Sounds Window
59
MEMOR™
4
1
Windows Mobile
From the Windows Mobile Start Menu, select Settings > Connections tab and
click the Audio icon:
Audio Window
The Audio applet allows to set the recording volumes of the main microphone
and of the headset microphone. Also, it allows to set the headset volume when
the user is listening to an audio file.
60
USE AND FUNCTIONING
4
icon on the right top of
To set the speaker volume during a call, click the
the Windows Mobile Start Menu. To set the front speaker or the headset
speaker volume, use the right bar or move the joystick up and down.
To set the rear speaker volume, use the left bar.
To set the Bluetooth® headset volume, tap Settings > Connections > Bluetooth
Manager > Connections and select the headset. The following window will
appear:
61
MEMOR™
4
1
4.8
WINDOWS CONNECTIONS
To connect the Memor to another device (i.e. Host PC) from Windows, several
programs are available. These programs require specific electrical connections
in order to function properly.
4.8.1
Microsoft® ActiveSync®
®
®
Microsoft ActiveSync gives you the possibility to connect your desktop
computer to your Memor and synchronize the information on them.
Synchronization compares the data on the Memor with that on the desktop
computer and updates both computers with the most recent information.
®
With ActiveSync , it is possible to:
- Back up and restore Memor data.
- Copy files between Memor and desktop computer.
- Synchronize files by selecting a synchronization mode.
You can establish an ActiveSync
following electrical interfaces:
®
connection to your Memor through the
‐
USB either directly or through the Single Cradle
‐
Bluetooth (see par. 4.8.2)
It is possible to constantly synchronize while connected to a desktop computer
or, alternatively, synchronization can be performed only when the synchronize
command is chosen. You can select which information types are synchronized
and control how much data is synchronized.
®
By default, ActiveSync does not automatically synchronize
®
all types of information. Use ActiveSync options to turn
synchronization on and off for specific information types.
NOTE
For example:
Synchronize Microsoft Word and Microsoft Excel files between the Memor and
the desktop computer. The files will automatically be converted to the correct
format.
In Windows Mobile before using the ActiveSync follow the
directions described in par. 3.3
NOTE
62
USE AND FUNCTIONING
4
Visit the following Microsoft Web site for the latest in updates
and technical information:
http://www.microsoft.com/windowsmobile/activesync/default.mspx
NOTE
ActiveSync® Remote
NOTE
Microsoft® ActiveSync® Remote is no longer supported in
Windows CE. For backward compatibility you can download
it from the Internet. We suggest enabling the FTP Server
and connecting to an FTP Client. See par. 4.8.4.
63
MEMOR™
4
1
4.8.2
Bluetooth® Manager Device Setup
Windows CE Bluetooth® Manager Device Setup
Before turning on Bluetooth®, ensure that the two devices are within close
range and that both Bluetooth-enabled devices are discoverable.
1.
Open the Bluetooth® control panel by tapping Start > Settings >
Connections tab > Bluetooth Manager.
2.
Tap Settings. The Settings tab allows you to enable or disable the
Bluetooth radio and specify settings for Incoming Connections.
3.
Select or clear the “Enable Bluetooth Radio” check box:
TM
Tap Find Me if you want to make the Memor visible to other Bluetooth devices
for 60 seconds, allowing them to set up a connection.
NOTE
64
By default, Bluetooth® is turned off. If you turn it on, and
then turn off your device, Bluetooth® also turns off. When
you turn on your device again, Bluetooth® turns on
automatically.
USE AND FUNCTIONING
4
To create a Bluetooth® partnership between your device and another device
that has Bluetooth® capabilities, ensure that the two devices are turned on,
discoverable, and within close range.
1.
Open the Bluetooth® control panel by tapping Start > Settings >
Connections tab > Bluetooth Manager.
1.
Search for the type of Device(s) you want to connect to by tapping Printer,
TM
Serial or All. The Memor will search for Bluetooth® Devices within range.
NOTE
3.
If you attempt to set up a connection when the Bluetooth®
Radio is disabled, you will receive a message reminding
you that the radio is turned off, and asking you if you want
to turn it on. Tap Yes if you need to enable the Bluetooth®
Radio.
Once searching is complete, Bluetooth® Device Profiles will be displayed
in the Discovery tab. You can set up a connection to a device on the list, or
clear it from the list by tapping the Clear button:
65
MEMOR™
4
1
To set up a connection:
1.
From the list of available devices, double tap the one you want to activate,
or select and then tap Connect. The resulting dialog will display services
that are available on the device:
2.
Select the service you want to connect to. The following table shows the
icons that display for different types of service.
Icon
Service
Dialup Networking
Printer
File Transfer Protocol (FTP) Object Exchange (OBEX)
Object Push (OPP) Object Exchange (OBEX)
ActiveSync
Human Interface Device (HID) - Keyboard
Serial
Virtual Port allows you to specify the incoming port, which is used to
communicate serially with an incoming device just as if it were a physical COM
port. This option is available only if you have selected a Printer or Serial service.
You can also select Encrypt or Authenticate from the Bluetooth® control panel
to apply or modify those settings.
1.
To require Authentication, tap the checkbox, then tap OK.
2.
The Authentication Request dialog will then open, requesting that you
enter a PIN. Use the Input Panel to type in the PIN.
66
USE AND FUNCTIONING
3.
4
Tap OK to complete.
The dialog will also appear when an Authentication request is received from
another device.
Once you have set up a Pairing, you can view the settings by double-tapping its
name from the Connections tab. The Pairing info dialog will display different
options, depending on what type of device you have selected and what service
you use.

For a printer connection, tap the arrow to change the Virtual Port, or Delete
to remove the device pairing.

Tap Sync to initiate a Sync (available only if the service is an ActiveSync
connection).
67
MEMOR™
4
1
TM
The icons displayed in the taskbar at the bottom of your Memor ’s screen will
show you the state of the Bluetooth connection, as shown in the table below.
Icon
Name
Disabled Icon
Unpaired Icon
Paired Icon
Discoverable
68
Description
Indicates that Bluetooth has been disabled.
Indicates that the Bluetooth radio is on but the
device is currently not paired to another.
Indicates that the Bluetooth radio is on and the
device is paired with at least another device.
Indicates that the device is discoverable by other
Bluetooth devices.
USE AND FUNCTIONING
4
Windows Mobile Bluetooth® Manager Device Setup
The Bluetooth Device Properties icon will only be visible if
Bluetooth hardware has been installed on the unit.
NOTE
Before turning on Bluetooth®, ensure that the two devices are within close
range and that both Bluetooth-enabled devices are discoverable.
1.
Tapping Start > Settings > Connections tab > Bluetooth Manager to open
the Bluetooth® control panel.
2.
Tap Settings. The Settings tab allows you to enable or disable the
Bluetooth radio and specify settings for Incoming Connections.
3.
Select or clear the “Enable Bluetooth Radio” check box:
Tap Find Me if you want to make the Memor visible to other Bluetooth devices
for 60 seconds, allowing them to set up a connection.
69
4
1
NOTE
MEMOR™
By default, Bluetooth® is turned off. If you turn it on, and
then turn off your device, Bluetooth® also turns off. When
you turn on your device again, Bluetooth® turns on
automatically.
To create a Bluetooth® partnership between your device and another device
that has Bluetooth® capabilities, ensure that the two devices are turned on,
discoverable, and within close range.
1.
Open the Bluetooth® control panel by tapping Start > Settings >
Connections tab > Bluetooth Manager.
1.
Search for available Bluetooth® Devices by tapping the button for the type
of device you want (Printer, Serial or All) or tap Discovery to skip this step.
The Memor will search for Bluetooth® Devices within range.
NOTE
2.
70
If you attempt to set up a connection when the Bluetooth®
Radio is disabled, you will receive a message reminding
you that the radio is turned off, and asking you if you want
to turn it on. Tap Yes if you need to enable the Bluetooth®
Radio.
Once searching is complete, Bluetooth® Device Profiles will be displayed
in the Discovery tab. You can set up a connection to a device on the list, or
clear it from the list by tapping the Clear button:
USE AND FUNCTIONING
4
To set up a connection:
1.
Double tap the device you want to activate, or select and then tap
Connect. The resulting dialog will display services that are available on
the device:
71
MEMOR™
4
1
2.
Select the service you want to connect to. The following table shows the
icons that display for different types of service.
Icon
Service
Dialup Networking
Printer
File Transfer Protocol (FTP) Object Exchange (OBEX)
Object Push (OPP) Object Exchange (OBEX)
ActiveSync
Human Interface Device (HID) - Keyboard
Serial
Virtual Port allows you to specify the incoming port, which is used to
communicate serially with an incoming device just as if it were a physical COM
port. This option is available only if you have selected a Printer or Serial service.
You can also select Encrypt or Authenticate from the Bluetooth® control panel
to apply or modify those settings.
1.
To require Authentication, tap the checkbox, then tap OK.
2.
The Authentication Request dialog will then open, requesting that you
enter a PIN. Use the Input Panel to type in the PIN.
72
USE AND FUNCTIONING
3.
4
Tap OK to complete.
The dialog will also appear when an Authentication request is received from
another device.
Once you have set up a Pairing, you can view the settings by double-tapping its
name from the Connections tab. Tap the arrow to change the Virtual Port, or
Delete to remove the device pairing. Tap Sync to initiate a Sync (available only
if the service is an ActiveSync connection).
4.8.3
Windows Mobile Phone
For information on Windows Mobile Phone use and functioning, refer to the
Windows Mobile web site: http://www.microsoft.com/windowsmobile.
73
MEMOR™
4
1
4.8.4
FTP Server Setup
The Memor Windows CE Operating System includes a sample File Transfer
Protocol (FTP) server. FTP is used for copying files to and from remote
computer systems over a network using TCP/IP. You can establish a
connection to your Memor using its FTP Server through the following interfaces:
WLAN using the 802.11 abg radio
Proceed as follows:
1.
Create a registry file (extension .reg) to setup and enable FTP Server
communication. A simple example file for anonymous logon is given below:
REGEDIT4
[HKEY_LOCAL_MACHINE\Comm\FTPD]
"DefaultDir"="\\"
"AllowAnonymousUpload"=dword:00000001
"UseAuthentication"=dword:00000000
"BaseDir"="\\"
"IsEnabled"=dword:00000001
"LogSize"=dword:00001000
"DebugOutputMask"=dword:00000017
"DebugOutputChannels"=dword:00000002
"IdleTimeout"=dword:0000012c
"AllowAnonymous"=dword:00000001
"AllowAnonymousVroots"=dword:00000001
®
2.
Copy this file to the Memor using ActiveSync .
3.
Launch the .reg file from the Memor.
4.
Perform a warm boot on the Memor.
5.
From the PC > Explorer address bar (or running an FTP Client from the
PC), enter the Memor IP address.
For more information on FTP Client/Server connections refer
to the following web page:
http://msdn2.microsoft.com/en-us/library/aa922316.aspx.
NOTE
74
USE AND FUNCTIONING
4.9
4
BACKUP DIRECTORY FILE MANAGEMENT
All of the Windows CE 5.0 system files reside in RAM (volatile memory) except
for the Backup directory, which resides in FLASH (non-volatile memory).
Therefore the contents of the Backup directory are persistent even if the mobile
computer is re-booted or the battery pack is changed.
You can save your more important files that you don't want to lose due to mobile
computer re-boot, in the Backup directory or create a sub-directory within
Backup.
Even though the Windows Directory resides in RAM, it often contains files or
sub-directories created by the user or by installation programs that you don't
want to lose at re-boot. To keep these files persistent it is necessary to copy
them to the directory \Backup\Windows. This directory doesn't exist originally
(only Backup exists), and therefore it must be created. At the next cold boot,
before activating the shell, Windows CE 5.0 will copy the contents including all
sub-directories of \Backup\Windows to \Windows.
Likewise, to maintain files that must be run at Windows CE 5.0 startup, (i.e.
.exe, .lnk, .vb, .htm, etc.), it is necessary to copy them to the directory
\Backup\Startup. This directory does not exist originally (only Backup exists),
and therefore it must be created. The application programs will be run after any
type of re-boot (both software and cold boot).
As an alternative to the Safe Setup function, it is possible to copy the .cab files
to the directory \Backup\Cabfiles (the Cabfiles sub-directory doesn't exists
originally and must therefore be created) and perform a mobile computer cold
boot to have the application installed. Once these files are copied to the
directory \Backup\Cabfiles, the application will be run after each re-boot.
From the second cold boot on, a message may be displayed such as
"<application name> is already installed. Re-install?". This message blocks the
boot process. Press the [Enter] key to continue the system initialization.
Even if the entire Windows Mobile file system reside in FLASH (non-volatile
memory), the mechanism described above is supported also on Windows
Mobile for backward compatibility.
4.10 FIRMWARE UPDATE
The Memor is equipped with a tool that implements a firmware update service.
For further information, refer to DFU Reference Guide.
75
MEMOR™
5
1
5
TECHNICAL FEATURES
5.1
TECHNICAL DATA
Memor Common Features
PHYSICAL CHARACTERISTICS
DIMENSIONS (LXWXH)
15.2 x 5.5 x 4.0 cm / 5.9 x 2.2 x 1.6 in
WEIGHT
(DEPENDING ON MODEL)
220 g / 7.76 oz (incl. 1100 mAH battery)
250 g / 8.81 oz (incl. 2000 mAH battery)
Rear Speaker for beeps and ringing tones
Microphone and Front Speaker for phone
calls
Headset
Two-color Good Read/Programmable
Charging Status
AUDIO
LEDS
DISPLAY
64K Color TFT LCD with 320 x 240 pixel
resolution (QVGA), with LED backlight
and touch screen, antiglare and
antiscratch protection
KEYBOARD
23 Plastic Top - Backlit Keys + Joystick +
lateral ON/OFF key
OPERATING TEMPERATURE*
0° to +50 °C / 32 °F to +122 °F
STORAGE TEMPERATURE
-20° to +70 °C / -4° to +158 °F
HUMIDITY**
10 to 80% non condensing for
temperatures < 38 °C
DROP RESISTANCE***
1.2 m / 3.9 ft
ENVIROMENTAL SEALING
IP 54
ESD PROTECTION
4 KV contact discharge, 8 KV air
discharge
*
Battery must be charged at a temperature ranging from 0° to +40 °C.
Close to the limits of the working temperature, some display and/or battery performance
degradation may occur.
**
Multiple rapid humidity and/or temperature variations may cause condensing.
***
Multiple drops can permanently damage the device.
76
TECHNICAL FEATURES
5
SYSTEM
OPERATING SYSTEM
Windows CE 5.0 Professional/ Windows
Mobile 6.1 Professional
MICROPROCESSOR
Marvell XScale PXA 310 624 MHz
SYSTEM RAM MEMORY
128 MB
SYSTEM FLASH MEMORY
256 MB
™
POWER SUPPLY
DC Supply
5 V ± 5%
Battery Pack
1 cell Li-Pol or Li-Ion 1100 [email protected] V
(nominal)
Alternatively 1 cell Li-Pol or Li-Ion 2000
[email protected] V (nominal)
Internal Backup Battery
Rechargeable Ni-MH 30 mAh (2 x 15 mAh
cells)
COMMUNICATIONS
Win CE
Com Port
Win Mobile
Com Port
Bluetooth Interface
COM5
COM5
Serial
Interface
COM1
COM6
COM1
COM6
INTERFACES
RS232
USB 1.1
LOCAL AREA
NETWORK (LAN)
Summit IEEE 802.11 abg
Frequency range: Country dependent, typically
2.4 and 5.2 GHz
CCX v4 Security
PERSONAL AREA
NETWORK (PAN)
Bluetooth® IEEE 802.15, Class 2, Version 2.0
77
MEMOR™
5
1
READING OPTIONS
LASER CHARACTERISTICS
SCANNING RATE - BIDIRECTIONAL
104 ± 12 scan/sec
MAXIMUM RESOLUTION
0.10 mm / 4 mils
SKEW ANGLE
± 50°
PITCH ANGLE
± 65°
AIMING LASER
VLD, wavelength 630~680 nm
BAR CODES
LASER CLASSIFICATION
LED CLASSIFICATION
UPC A, UPC E, EAN 8, EAN 13,
Code 39, Code 39 Full ASCII, Code
32, Interleaved 2 of 5, Industrial 2 of
5, Matrix 2 of 5, Code 128, EAN
128, Codabar, MSI, Plessey, Code
93, Code 11, GS1 Databar
Laser: Class 2
Safety class EN 60825-1:2001
Led (Green Spot): Class 1
IMAGER CHARACTERISTICS
SCANNING RATE
60 frames/sec
MAXIMUM RESOLUTION
0.13 mm / 5 mils
AIMING LASER
VLD, wavelength 645~665 nm
Decoded barcodes 1D:
UPC A, UPC E, EAN 8, EAN 13,
Interleaved 2 of 5, Code 39, Code
39 Full ASCII, Codabar, Code 128,
EAN 128, Code 93, GS1 Databar,
MSI, Bookland EAN, ISSN EAN;
Matrix 2 of 5, Standard 2 of 5
BAR CODES
Decoded barcodes 2D:
PDF417, DataMatrix, QR,
MicroPDF, RSS, Maxicode, Aztec
Postal codes:
POSTNET, PLANET, Japan Post,
Australia Post, KIX Code, Royal
Mail Code (RM4SCC), Intelligent
mail, UPU FICS
78
TECHNICAL FEATURES
5
LASER CLASSIFICATION
Laser: Class 2
Safety class: N 60825-1:2001
LED CLASSIFICATION
Led (Illuminator): Class 1M
ILLUMINATION SYSTEM
LEDs 620~630 nm
79
MEMOR™
5
1
5.2
READING DIAGRAMS
Memor 1D
Typical Reading Diagram - Reading Zones (10° skew angle)
1,00 mm
(40 mils)
0,25 mm
(10 mils)
400
0,35 mm
(14 mils)
1,4 mm
(55 mils)
0,50 mm
(20 mils)
0,19 mm
(7,5 mils)
300
0,13 mm
(5 mils)
200
100
0
100
200
300
400
mm
0
80
100
200
300
400
500
600
700
800
900
1000 1100 1200
mm
TECHNICAL FEATURES
5
Memor SE4500-DL
Typical Reading Diagram - Reading Zones (10° skew angle)
13 mil
UPC-A
6.67 mil
PDF417
200
10 mil
PDF417
5.0 mil
PDF417
150
5.0 mil
Code 39
20 mil
Code 39
15 mil
PDF417
7.5 mil
Code 39
100
50
0
50
100
150
200
mm
0
50
100
150
200
250
300
350
400
450
500
550
600
mm
81
MEMOR™
6
1
6
TEST CODES
High Density Codes
0.25 mm (10 mils)
Code 39
!17162H!
17162
2/5 Interleaved
Code 128
Ë"8NduÌ
0123456784
ÌtestwÎ
test
80%
EAN 13
x(0B2DE5*KKKKLM(
80%
EAN 8
(6450*TRMN(
82
TEST CODES
6
Medium Density Codes
0.38 mm (15 mils)
Code 39
Interleaved 2/5
!17162H!
17162
Ë"8NduÌ
0123456784
Code 128
ÌtestwÎ
test
100%
EAN 13
x(0B2DE5*KKKKLM(
100%
EAN 8
(6450*TRMN(
83
MEMOR™
6
1
Low Density Codes
0.50 mm (20 mils)
Code 39
!17162H!
17162
Interleaved 2/5
Ë"8NduÌ
0123456784
Code 128
ÌtestwÎ
test
120%
EAN 13
x(0B2DE5*KKKKLM(
120%
EAN 8
(6450*TRMN(
84
TEST CODES
6
2D Codes
Datamatrix ECC200
Example
Inverse
Datamatrix ECC200
Example
85
SAFETY REGULATIONS
NOTE
Read this manual carefully before performing any type of
connection to the Memor mobile computer.
The user is responsible for any damages caused by incorrect
use of the equipment or by inobservance of the indication
supplied in this manual.
GENERAL SAFETY RULES

Use only the components supplied by the manufacturer for the specific
Memor being used.

Do not attempt to disassemble the Memor mobile computer, as it does not
contain parts that can be repaired by the user. Any tampering will
invalidate the warranty.

When replacing the battery pack or at the end of the operative life of the
Memor mobile computer, disposal must be performed in compliance with
the laws in force.

Before using the devices and the battery packs, read par. 2.2.

Do not submerge the Memor in liquid products.

For further information, refer to this manual and to the Datalogic Mobile
web site: www.mobile.datalogic.com.
POWER SUPPLY
This device is intended to be connected to a UL Listed/CSA Certified computer
which supplies power directly to the Memor or else be supplied by a UL
Listed/CSA Certified Power Unit marked “Class 2” or LPS power source rated 5
V, 3.0 A, which supplies power directly to the Memor via the power connector of
the cable.
The package includes three international plug adapters. The adapters must be
plugged in the power supply before the power supply itself is plugged on the
wall outlet.
86
LASER SAFETY
The laser light is visible to the human eye and is emitted from the window
indicated in the figure.
This information applies to both laser models and the Memor Imager Aiming
System.
Laser output window
87
I
D
F
La luce laser è
visibile all'occhio
umano e viene
emessa dalla
finestra indicata
nella figura.
Die Laserstrahlung
ist für das
menschliche Auge
sichtbar und wird am
Strahlaustrittsfenster
ausgesendet (siehe
Bild).
Le rayon laser est
visible à l'oeil nu et il
est émis par la
fenêtre désignée sur
l'illustration dans la
figure.
La luz láser es
visible al ojo
humano y es
emitida por la
ventana indicada
en la figura.
LUCE LASER
NON FISSARE IL
FASCIO
APPARECCHIO
LASER DI CLASSE 2
MASSIMA POTENZA
DI USCITA: 1.7mW
LUNGHEZZA D'ONDA
EMESSA: 650nm
CONFORME A EN
60825-1 (2001)
LASERSTRAHLUNG
NICHT IN DER STRAHL
BLINKEN
PRODUKT DER
LASERKLASSE 2
MAXIMALE
AUSGANGLEISTUNG:
1.7mW
WELLENLÄNGE:
650nm
ENTSPR. EN 60825-1
(2001)
RAYON LASER
EVITER DE
REGARDER
LE RAYON
APPAREIL LASER DE
CLASSE 2
MAXIMUM PUISSANCE
DE SORTIE: 1.7mW
LONGUER D'ONDE
EMISE: 650nm
CONFORME A EN
60825-1 (2001)
RAYO LÁSER
NO MIRAR FIJO EL
RAYO
APARATO LÁSER DE
CLASE 2
MÁXIMA POTENCIA
DE SALIDA: 1.7mW
LONGITUD DE ONDA
EMITIDA: 650nm
CONFORME A EN
60825-1
(2001)
88
E
ENGLISH
The following information is provided to comply with the rules imposed by
international authorities and refers to the correct use of your mobile computer.
STANDARD LASER SAFETY REGULATIONS
This product conforms to the applicable requirements of both CDRH 21 CFR
1040 Subchapter J and EN 60825-1:2001 at the date of manufacture.
For installation, use and maintenance, it is not necessary to open the device.
CAUTION
Do not attempt to open or otherwise service any
components in the optics cavity. Opening or servicing
any part of the optics cavity by unauthorized personnel
may violate laser safety regulations. The optics system is
a factory only repair item.
Use of controls or adjustments or performance of
procedures other than those specified herein may result
in exposure to hazardous visible laser light.
CAUTION
The product utilizes a low-power laser diode. Although staring directly at the
laser beam momentarily causes no known biological damage, avoid staring at
the beam as one would with any very strong light source, such as the sun.
Avoid that the laser beam hits the eye of an observer, even through reflective
surfaces such as mirrors, etc.
Use of optical systems with the scanner will increase eye
hazard. Optical instruments include binoculars,
microscopes, eye glasses and magnifying glasses.
CAUTION
ITALIANO
Le seguenti informazioni vengono fornite dietro direttive delle autorità
internazionali e si riferiscono all’uso corretto del terminale.
NORMATIVE STANDARD PER LA SICUREZZA LASER
Questo prodotto risulta conforme alle normative vigenti sulla sicurezza laser alla
data di produzione: CDRH 21 CFR 1040 sezione J e EN 60825-1:2001.
Non si rende mai necessario aprire l’apparecchio per motivi di installazione,
utilizzo o manutenzione.
89
Non tentare di accedere allo scomparto contenete i
componenti ottici o di farne la manutenzione.
ATTENZIONE
L’apertura dello scomparto, o la manutenzione di
qualsiasi parte ottica da parte di personale non
autorizzato, potrebbe violare le norme della sicurezza. Il
sistema ottico può essere riparato solamente alla
fabbrica.
L'utilizzo di procedure o regolazioni differenti da quelle
descritte
nella
documentazione
può
provocare
un'esposizione pericolosa a luce laser visibile.
ATTENZIONE
Il prodotto utilizza un diodo laser a bassa potenza. Sebbene non siano noti
danni riportati dall’occhio umano in seguito ad una esposizione di breve durata,
evitare di fissare il raggio laser così come si eviterebbe qualsiasi altra sorgente
di luminosità intensa, ad esempio il sole. Evitare inoltre di dirigere il raggio laser
negli occhi di un osservatore, anche attraverso superfici riflettenti come gli
specchi.
ATTENZIONE
L’uso di strumenti ottici assieme allo scanner può
aumentare il pericolo di danno agli occhi. Tali strumenti
ottici includono cannocchiali, microscopi, occhiali e lenti
di ingrandimento.
DEUTSCH
Die folgenden Informationen stimmen mit den Sicherheitshinweisen überein, die
von internationalen Behörden auferlegt wurden, und sie beziehen sich auf den
korrekten Gebrauch vom Terminal.
NORM FÜR DIE LASERSICHERHEIT
Dies Produkt entspricht am Tag der Herstellung den gültigen EN 60825-1:2001
und CDRH 21 CFR 1040 Subchapter J Normen für die Lasersicherheit.
Es ist nicht notwendig, das Gerät wegen Betrieb oder Installations-, und
Wartungs-Arbeiten zu öffnen.
ACHTUNG
90
Unter keinen Umständen darf versucht werden, die
Komponenten im Optikhohlraum zu öffnen oder auf
irgendwelche andere Weise zu warten. Das Öffnen bzw.
Warten der Komponenten im Optikhohlraum durch
unbefugtes Personal verstößt gegen die LaserSicherheitsbestimmungen. Das Optiksystem darf nur
werkseitig repariert werden.
Jegliche Änderungen am Gerät sowie Vorgehensweisen,
die nicht in dieser Betriebsanleitung beschrieben werden,
können ein gefährliches Laserlicht verursachen.
ACHTUNG
Der Produkt benutzt eine Laserdiode. Obwohl zur Zeit keine Augenschäden von
kurzen Einstrahlungen bekannt sind, sollten Sie es vermeiden für längere Zeit in
den Laserstrahl zu schauen, genauso wenig wie in starke Lichtquellen (z.B. die
Sonne). Vermeiden Sie es, den Laserstrahl weder gegen die Augen eines
Beobachters, noch gegen reflektierende Oberflächen zu richten.
ACHTUNG
Die Verwendung von Optiksystemen mit diesem Scanner
erhöht die Gefahr einer Augenbeschädigung. Zu optischen
Instrumenten gehören unter anderem Ferngläser,
Mikroskope, Brillen und Vergrößerungsgläser.
FRANÇAIS
Les informations suivantes sont fournies selon les règles fixées par les autorités
internationales et se réfèrent à une correcte utilisation du terminal.
NORMES DE SECURITE LASER
Ce produit est conforme aux normes de sécurité laser en vigueur à sa date de
fabrication: CDRH 21 CFR 1040 sous-chapitre J et EN 60825-1:2001.
Il n’est pas nécessaire d’ouvrir l’appareil pour l’installation, l’utilisation ou
l’entretien.
ATTENTION
Ne pas essayer d’ouvrir ou de réparer les composants de
la cavité optique. L’ouverture de la cavité optique ou la
réparation de ses composants par une personne non
qualifiée peut entraîner le nonrespect des règles de
sécurité relatives au laser. Le système optique ne peut
être réparé qu’en usine.
L'utilisation de procédures ou réglages différents de ceux
donnés ici peut entraîner une dangereuse exposition à
lumière laser visible.
ATTENTION
Le produit utilise une diode laser. Aucun dommage aux yeux humains n’a été
constaté à la suite d’une exposition au rayon laser. Eviter de regarder fixement
le rayon, comme toute autre source lumineuse intense telle que le soleil. Eviter
aussi de diriger le rayon vers les yeux d’un observateur, même à travers des
surfaces réfléchissantes (miroirs, par exemple).
91
ATTENTION
L’utilisation d’instruments optiques avec le scanneur
augmente le danger pour les yeux. Les instruments
optiques comprennent les jumelles, les microscopes, les
lunettes et les verres grossissants.
ESPAÑOL
Las informaciones siguientes son presentadas en conformidad con las
disposiciones de las autoridades internacionales y se refieren al uso correcto
del terminal.
NORMATIVAS ESTÁNDAR PARA LA SEGURIDAD LÁSER
Este aparato resulta conforme a las normativas vigentes de seguridad láser a la
fecha de producción: CDRH 21 CFR 1040 Sección J y EN 60825-1:2001.
No es necesario abrir el aparato para la instalación, la utilización o la
manutención.
ATENCIÓN
No intente abrir o de ninguna manera dar servicio a ninguno
de los componentes del receptáculo óptico. Abrir o dar
servicio a las piezas del receptáculo óptico por parte del
personal no autorizado podría ser una violación a los
reglamentos de seguridad. El sistema óptico se puede
reparar en la fábrica solamente.
La utilización de procedimientos o regulaciones diferentes
de aquellas describidas en la documentación puede causar
una exposición peligrosa a la luz láser visible.
ATENCIÓN
El aparato utiliza un diodo láser a baja potencia. No son notorios daños a los
ojos humanos a consecuencia de una exposición de corta duración. Eviten de
mirar fijo el rayo láser así como evitarían cualquiera otra fuente de luminosidad
intensa, por ejemplo el sol. Además, eviten de dirigir el rayo láser hacia los ojos
de un observador, también a través de superficies reflectantes como los
espejos.
El uso de sistemas ópticos con el escáner aumentará el
riesgo de daños oculares. Los instrumentos ópticos
incluyen binoculares, microscopios, lentes y lupas.
ATENCIÓN
92
LED CLASS
According to EN60825-1:2001, the Memor 1D models which use the green spot
LED are also CLASS 1 LED PRODUCTS.
APPARECCHIO LED CLASSE 1 IEC
PRODUKT LED KLASSE 1 IEC
PRODUIT LED DE CLASSE 1 IEC
PRODUCTO LED DE CLASE 1 IEC
According to EN60825-1:2001, the Memor 2D models which use the illuminator
LED are also CLASS 1M LED PRODUCTS.
LED LIGHT
DO NOT VIEW DIRECTLY
WITH OPTICAL INSTRUMENTS
CLASS 1M LED PRODUCT
LUCE LED
NON OSSERVARE DIRETTAMENTE
CON STRUMENTI OTTICI
APPARECCHIO LED DI CLASSE 1M
LAMPE LED
NE PAS OBSERVER DIRECTEMENT
AVEC INSTRUMENTS OPTIQUES
APPAREIL LED DE CLASSE 1M
LUZ LED
NO OBSERVAR DIRECTAMENTE
CON INSTRUMENTOS ÓPTICOS.
PRODUCTO LED DE CLASE 1M
LED-LICHT
NICHT DIREKT MIT OPTISCHEN
INSTRUMENTEN BETRACHTEN.
GERÄTEKLASSE 1M.
RADIO COMPLIANCE
In radio systems configured with mobile computers and access points, the
frequencies to be used must be allowed by the spectrum authorities of the
specific country in which the installation takes place. Be absolutely sure that the
system frequencies are correctly set to be compliant with the spectrum
requirements of the country.
The Radio modules used in this product automatically adapt to the frequencies
set by the system and do not require any parameter settings.
The following shows the correspondence between the Memor models and the
Radio components:

DL-Memor+802.11+BT models: 802.11a/b/g and BT radio modules
93
Information for the User
ENGLISH
Contact the competent authority responsible for the management of radio
frequency devices of your country to verify any possible restrictions or licenses
required.
Refer to the web site http://europa.eu.int/comm/enterprise/rtte/spectr.htm for
further information.
ITALIANO
Prendi contatto con l'autorità competente per la gestione degli apparati a radio
frequenza del tuo paese, per verificare eventuali restrizioni o licenze. Ulteriori
informazioni sono disponibili sul sito:
http://europa.eu.int/comm/enterprise/rtte/spectr.htm.
FRANÇAIS
Contactez l'autorité compétente en la gestion des appareils à radio fréquence
de votre pays pour vérifier d'éventuelles restrictions ou licences. Pour tout
renseignement vous pouvez vous adresser au site web:
http://europa.eu.int/comm/enterprise/rtte/spectr.htm.
DEUTSCH
Wenden Sie sich an die für Radiofrequenzgeräte zuständige Behörde Ihres
Landes, um zu prüfen ob es Einschränkungen gibt, oder eine Lizenz
erforderlich ist. Weitere Informationen finden Sie auf der Web Seite:
http://europa.eu.int/comm/enterprise/rtte/spectr.htm.
ESPAÑOL
Contacta la autoridad competente para la gestión de los dispositivos de radio
frecuencia de tu país, para verificar cualesquiera restricciones o licencias
posibles requerida. Además se puede encontrar mas información en el sitio
Web:http://europa.eu.int/comm/enterprise/rtte/spectr.htm.
94
FCC COMPLIANCE
FCC Regulations:

This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

This device has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiated
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user‘s authority to operate the equipment.


The antenna(s) used for this transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
This device is restricted to indoor use when operated in the 5.15 to 5.25
GHz frequency range.
95
RF EXPOSURE INFORMATION (SAR)
This model device meets the government’s requirements for exposure to radio
waves. This device is designed and manufactured not to exceed the emission
limits for exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government.
The exposure standard for wireless devices employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC
is 1.6W/kg. *Tests for SAR are conducted using standard operating positions
accepted by the FCC with the device transmitting at its highest certified power
level in all tested frequency bands. Although the SAR is determined at the
highest certified power level, the actual SAR level of the device while operating
can be well below the maximum value. This is because the device is designed
to operate at multiple power levels so as to use only the poser required to reach
the network. In general, the closer you are to a wireless base station antenna,
the lower the power output.
The highest SAR value for the model device as reported to the FCC are the
following:
-
DL-Memor + 802.11 + BT models: for use at the head is 1.32 W/Kg and
when worn on the body, as described in the user guide, is 0.518 W/Kg.
(Body-worn measurements differ among device models, depending upon
available enhancements and FCC requirements).
While there may be differences between the SAR levels of various devices and
at various positions, they all meet the government requirement.
The FCC has granted an Equipment Authorization for this model device with all
reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. SAR information on this model device is on file with the FCC and
can be found under the Display Grant section of http://www.fcc.gov/oet/fccid
after searching on the below FCC ID:
FCC ID: U4GA030 for DL-Memor+802.11+BT models.
This device is compliant with SAR for general population /uncontrolled exposure
limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the
measurement methods and procedures specified in OET Bulletin 65
Supplement C.
For body worn operation, this device has been tested and meets the FCC RF
exposure guidelines for use with an accessory that contains no metal and the
positions the handset a minimum of 1.5 cm from the body. Use of other
enhancements may not ensure compliance with FCC RF exposure guidelines.
If you do not use a body-worn accessory and are not holding the device at the
ear, position the handset a minimum of 1.5 cm from your body when the device
is switched on.
96
INDUSTRY CANADA COMPLIANCE
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter.
The County Code Selection feature is disabled for products marketed in the
US/Canada.
IMPORTANT NOTE:
IC Radiation Exposure Statement
This EUT is compliant with SAR for general population/uncontrolled exposure
limits in IC RSS-102 and had been tested in accordance with the measurement
methods and procedures specified in IEEE 1528. This equipment should be
installed and operated with minimum distance 1,5cm between the radiator &
your body.
Be advised that high-power radars are allocated as primary users (i.e. priority
users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars
could cause interference and/or damage to LE-LAN devices.
97
SAR COMPLIANCE
This product has been tested and found to comply with the following standards:
-
OET BULLETIN 65 SUPPLEMENT C: evaluating compliance with FCC
guidelines for human exposure to radio frequency electromagnetic fields.
-
EN 62311:2008: assessment of electronic and electrical equipment related
to human exposure restrictions for electromagnetic fields (0 Hz – 300
GHz).
PATENTS
This product is covered by one or more of the following patents.
Design Pat. Nos: EP 469,143; EP 1,582,024; AU 310182 S; CN 658612; HK
0601962.6; KR 30-0466667; JP1325117; TW D118829; US D574,830 S.
US Pat. Nos: 5,992,740; 6,808,114 B1; 6,997,385 B2; 7,387,246 B2.
European Pat. Nos: 681,257 B1; 789,315 B1; 1,128,315 B1; 1,396,811 B1;
1,413,971 B1.
Additional patents pending.
98
WEEE COMPLIANCE
Informazione degli utenti ai sensi della Direttiva Europea 2002/96/EC
L’apparecchiatura che riporta il simbolo del bidone barrato deve essere
smaltita, alla fine della sua vita utile, separatamente dai rifiuti urbani.
Smaltire l’apparecchiatura in conformità alla presente Direttiva consente di:

evitare possibili conseguenze negative per l’ambiente e per la salute
umana che potrebbero invece essere causati dall’errato smaltimento
dello stesso;

recuperare materiali di cui è composto al fine di ottenere un
importante risparmio di energia e di risorse.
Per maggiori dettagli sulle modalità di smaltimento, contattare il Fornitore dal
quale è stata acquistata l’apparecchiatura o consultare la sezione dedicata sul
sito www.mobile.datalogic.com.
Information for the user in accordance with the European Commission
Directive 2002/96/EC
At the end of its useful life, the product marked with the crossed out wheeled
wastebin must be disposed of separately from urban waste.
Disposing of the product according to this Directive:

avoids potentially negative consequences to the environment and
human health which otherwise could be caused by incorrect disposal

enables the recovery of materials to obtain a significant savings of
energy and resources.
For more detailed information about disposal, contact the supplier that provided
you with the product in question or consult the dedicated section at the website
www.mobile.datalogic.com.
Information
2002/96/EC
aux
utilisateurs
concernant
la
Directive
Européenne
Au terme de sa vie utile, le produit qui porte le symbole d'un caisson à ordures
barré ne doit pas être éliminé avec les déchets urbains.
Éliminer ce produit selon cette Directive permet de:
99


éviter les retombées négatives pour l'environnement et la santé
dérivant d'une élimination incorrecte
récupérer les matériaux dans le but d'une économie importante en
termes d'énergie et de ressources
Pour obtenir des informations complémentaires concernant l'élimination,
veuillez contacter le fournisseur auprès duquel vous avez acheté le produit ou
consulter la section consacrée au site Web www.mobile.datalogic.com.
Información para el usuario de accuerdo con la Directiva Europea
2002/96/CE
Al final de su vida útil, el producto marcado con un simbolo de contenedor de
bassura móvil tachado no debe eliminarse junto a los desechos urbanos.
Eliminar este producto de accuerdo con la Directiva permite de:

evitar posibles consecuencias negativas para el medio ambiente y la
salud derivadas de una eliminación inadecuada

recuperar los materiales obteniendo así un ahorro importante de
energía y recursos
Para obtener una información más detallada sobre la eliminación, por favor,
póngase en contacto con el proveedor donde lo compró o consultar la sección
dedicada en el Web site www.mobile.datalogic.com.
Benutzerinformation bezüglich Richtlinie 2002/96/EC der europäischen
Kommission
Am Ende des Gerätelebenszyklus darf das Produkt nicht über den städtischen
Hausmüll entsorgt werden. Eine entsprechende Mülltrennung ist erforderlich.
Beseitigung des Produkts entsprechend der Richtlinie:

verhindert negative Auswirkungen für die Umwelt und die Gesundheit
der Menschen

ermöglicht die Wiederverwendung der Materialien und spart somit
Energie und Resourcen
Weitere Informationen zu dieser Richtlinie erhalten sie von ihrem Lieferanten
über den sie das Produkt erworben haben, oder besuchen sie unsere Hompage
unter www.mobile.datalogic.com.
100
CHINA ROHS POLLUTION CONTROL LOGOS
Part name
Upper
Case
Lower
Case
Touch
Panel
PCB
Board
Laser
Engine
Imager
Engine
BT Module
(Note 1)
802.11
a/b/g
Radio
Module
(Note 1)
Toxic or Hazardous Substances and Elements for DL-MEMOR
Pb
Hg
Cd
Cr6+
PBB
PBDE
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
99% of the parts of this product adopt the nonpoisonous and harmless
environmental protection material to make, the part with poisonous harmful
substance or the element is all unable to realize the substitution of the
poisonous harmful thing or the element because the global technological
development level is limited.
O: Indicates that this is a toxic or hazardous substance contained in all of the
homogenous materials for this part is below the limit requirement in
SJ/T11363-2006.
X: Indicates that this is toxic or hazardous substance contained in at least
one of the homogeneous materials used for this part is above the limit
requirement in SJ/T11363-2006.
Note 1: It is only for 944201038, 944201039, 944201040, 944201041.
101
GLOSSARY
Access Point
A device that provides transparent access between Ethernet wired networks
and IEEE 802.11 interoperable radio-equipped mobile units. Hand-held mobile
computers, PDAs or other devices equipped with radio cards, communicate with
wired networks using Access Points (AP). The mobile unit (mobile computer)
may roam among the APs in the same subnet while maintaining a continuous,
seamless connection to the wired network.
Applet
Diminutive form of app (application), it refers to simple, single-function programs
that often ship with a larger product. Programs such as Windows' Calculator,
File Manager, and Notepad are examples of applets.
Barcode
A pattern of variable-width bars and spaces which represents numeric or
alphanumeric data in binary form. The general format of a barcode symbol
consists of a leading margin, start character, data or message character, check
character (if any), stop character, and trailing margin. Within this framework,
each recognizable symbology uses its own unique format.
Baud Rate
A measure for data transmission speed.
Bit
Binary digit. One bit is the basic unit of binary information. Generally, eight
consecutive bits compose one byte of data. The pattern of 0 and 1 values within
the byte determines its meaning.
Bluetooth®
A standard radio technology using a proprietary protocol. The onboard
Bluetooth module in the mobile computer is compatible with the 1.1 protocol.
Byte
On an addressable boundary, eight adjacent binary digits (0 and 1) combined in
a pattern to represent a specific character or numeric value. Bits are numbered
from the right, 0 through 7, with bit 0 the low-order bit. One byte in memory can
be used to store one ASCII character.
Decode
To recognize a bar code symbology (e.g., Codabar, Code 128, Code 3 of 9,
UPC/EAN, etc.) and analyze the content of the bar code scanned.
Depth of Field (DOF)
The portion of a scene that appears acceptably sharp in the image. Although a
lens can precisely focus at only one distance, the decrease in sharpness is
102
gradual on each side of the focused distance, so that within the DOF, the
unsharpness is imperceptible under normal viewing conditions.
EEPROM
Electrically Erasable Programmable Read-Only Memory. An on-board nonvolatile memory chip.
Ethernet
The standard local area network (LAN) access method. A reference to "LAN,"
"LAN connection" or "network card" automatically implies Ethernet. Defined by
the IEEE as the 802.3 standard, Ethernet is used to connect computers in a
company or home network as well as to connect a single computer to a cable
modem or DSL modem for Internet access.
Firmware
Firmware is a software program or set of instructions programmed on a
hardware device. It provides the necessary instructions for how the device
communicates with the other computer hardware. Firmware is typically stored in
the flash ROM of a hardware device. While ROM is "read-only memory," flash
ROM can be erased and rewritten because it is actually a type of flash memory.
Flash Disk
Non-volatile memory for storing application and configuration files.
Host
A computer that serves other mobile computers in a network, providing services
such as network control, database access, special programs, supervisory
programs, or programming languages.
IEEE 802.11
A set of standards carrying out wireless local area network (WLAN) computer
communication in the 2.4, 3.6 and 5 GHz frequency bands. They are created
and maintained by the IEEE LAN/MAN Standards Committee.
Liquid Crystal Display (LCD)
A display that uses liquid crystal sealed between two glass plates. The crystals
are excited by precise electrical charges, causing them to reflect light outside
according to their bias. They use little electricity and react relatively quickly.
They require external light to reflect their information to the user.
Light Emitting Diode (LED)
A low power electronic light source commonly used as an indicator light. It uses
less power than an incandescent light bulb but more than a Liquid Crystal
Display (LCD).
Null modem cable
RS-232 serial cable where the transmit and receive lines are crosslinked. In
some cables there are also handshake lines crosslinked. In many situations a
straight through serial cable is used, together with a null modem adapter. The
adapter contains the necessary crosslinks between the signals.
103
Pairing
A Bluetooth pairing occurs when two Bluetooth devices agree to communicate
with each other and establish a connection.
Piconet
A piconet is a Bluetooth PAN that links up to eight devices. Each piconet is
controlled by one master device, and up to seven slave devices at any one time.
Any device may be a member of more than one piconet, changing its
membership as a user moves from one area to another.
RAM
Random Access Memory. Data in RAM can be accessed in random order, and
quickly written and read.
RF
Radio Frequency.
RTC
Real Time Clock.
TDMA
Time division multiple access (TDMA) is digital transmission technology that
allows a number of users to access a single radio-frequency (RF) channel
without interference by allocating unique time slots to each user within each
channel. The TDMA digital transmission scheme multiplexes three signals over
a single channel. The current TDMA standard for cellular divides a single
channel into six time slots, with each signal using two slots, providing a 3 to 1
gain in capacity over advanced mobile-phone service (AMPS). Each caller is
assigned a specific time slot for transmission.
USB
Universal Serial Bus. Type of serial bus that allows peripheral devices (disks,
modems, printers, digitizers, data gloves, etc.) to be easily connected to a
computer. A “plug-and-play” interface, it allows a device to be added without an
adapter card and without rebooting the computer (the latter is known as hotplugging). The USB standard, developed by several major computer and
telecommunications companies, supports data-transfer speeds up to 12
megabits per second, multiple data streams, and up to 127 peripherals.
WLAN
A Wireless Local Area Network links devices via a wireless distribution method
(typically spread-spectrum or OFDM radio), and usually provides a connection
through an access point to the wider internet. This gives users the mobility to
move around within a local coverage area and still be connected to the network.
WPAN
A Wireless Personal Area Network is a personal area network - a network for
interconnecting devices centered around an individual person's workspace - in
104
which the connections are wireless. Typically, a wireless personal area network
uses some technology that permits communication within about 10 meters - in
other words, a very short range.
105
INDEX
A
Accessories; 7
ActiveSync® Remote; 63
I
Industry Canada Compliance; 97
L
B
Backup Directory File
Management; 75
Batteries and Maintenance; 8
Bluetooth® Manager Device
Setup; 64
Buttons; 49
C
Charging the Batteries; 8
China RoHS Pollution Control
Logos; 101
Cleaning the Mobile Computer; 14
Connection Cables; 23
RS232 Direct Connection; 23
Connections; 15
Connection to USB peripherals;
17
Control Panel; 48
Conventions; v
D
Data Capture; 31
Imager Data Capture; 32
Laser Data Capture; 31
Data Capture Configuration; 42
Default Settings; 45
Description of the Keys; 34
F
FCC Compliance; 95
Files Admin; 51
Firmware Update for Windows CE;
75
FTP Server Setup; 74
G
General View; vi
Glossary; 102
Laser Safety; 87
LED Class; 93
M
Memor™ Description; 1
Micro SD Card Insertion; 5
Microsoft® ActiveSync®; 62
Models Description; 2
P
Package Contents; 4
Patents; 98
R
Radio Compliance; 93
Reader Parameters; 44
Reading Diagrams; 80
Reference Documentation; v
References; v
Registry; 50
Replacing the Batteries; 10
Resetting the Memor; 36
RF Exposure Information (SAR);
96
RS232 Connection; 19
S
Safe Setup; 51
Safety Regulations; 86
SAR Compliance; 98
Save Session; 51
Scan Parameters; 44
Services and Support; v
Special Function Icons; 35
Startup; 26
Status Indicators; 39
Stylus Calibration; 55
T
Taskbar; 40
106
Technical Features; 76
Test Codes; 82
U
USB Connection; 15
Using the Joystick; 29
Using the Stylus; 28
V
Volume Settings; 58
W
WEEE Compliance; 99
Windows Connections; 62
Windows Mobile Bluetooth®
Manager Device Setup; 69
Windows Mobile Phone; 73
Windows Mobile Welcome Wizard;
30
Wireless and Radio Frequencies
Warnings; 24
Wireless Communications; 53
WLAN Connection; 20
WPAN Connections; 22
107
Datalogic Mobile S.r.l.
Via S. Vitalino, 13
40012 - Lippo di Calderara
Bologna - Italy
11
dichiara che
declares that the
déclare que le
bescheinigt, daß das Gerät
declare que el
DL-MEMOR
modelli con funzionalità radio 802.11abg+BT
models with 802.11abg+BT radio feature
modèles avec 802.11abg+BT radio intégrés
modelle mit 802.11abg+BT radio-funktionalität
modelos con funcionalidad radio 802.11abg+BT
sono conformi alle Direttive del Consiglio Europeo sottoelencate:
are in conformity with the requirements of the European Council Directives listed below
sont conformes aux spécifications des Directives de l’Union Européenne ci-dessous:
der nachstehend angeführten Direktiven des Europäischen Rats:
cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:
2004/108/EC and 1999/5/EC R&TTE
Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:
This declaration is based upon compliance of the products to the following standards:
Cette déclaration repose sur la conformité des produits aux normes suivantes:
Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:
Esta declaración se basa en el cumplimiento de los productos con la siguientes normas:
ETSI EN 301 489-1 V1.8.1, APRIL 2008 :
ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM
MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC)
STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 1:
COMMON TECHNICAL REQUIREMENTS
ETSI EN 301 489-17 V2.1.1, MAY 2009 :
ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM
MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC)
STANDARD FOR RADIO EQUIPMENT; PART 17: SPECIFIC
CONDITIONS FOR BROADBAND DATA TRANSMITTING SYSTEMS
EN 55022:2006 (CLASS B) + A1:2007 :
INFORMATION TECHNOLOGY EQUIPMENT
RADIO DISTURBANCE CHARACTERISTICS
LIMITS AND METHODS OF MEASUREMENTS
EN 55024:1998 + A1:2001 + A2:2003
INFORMATION TECHNOLOGY EQUIPMENT
IMMUNITY CHARACTERISTICS
LIMITS AND METHODS OF MEASUREMENT
ETSI EN 300 328 V1.7.1, OCTOBER 2006 :
ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM
MATTERS (ERM); WIDEBAND TRANSMISSION SYSTEMS; DATA
TRANSMISSION EQUIPMENT OPERATING IN THE 2,4GHZ ISM
BAND AND USING WIDE BAND MODULATION TECHNIQUES;
HARMONIZED EN COVERING ESSENTIAL REQUIREMENTS
UNDER ARTICLE 3.2 OF THE R&TTE DIRECTIVE
ETSI EN 301 893 V1.5.1, DECEMBER 2008
BROADBAND RADIO ACCESS NETWORKS (BRAN); 5 GHZ HIGH
RLAN; HARMONIZED EN COVERING
PERFORMANCE
ESSENTIAL REQUIREMENTS UNDER ARTICLE 3.2 OF THE
R&TTE DIRECTIVE
- SAFETY - PART 1 :
EN 60950-1:2006 + A11:200 :
INFORMATION TECHNOLOGY EQUIPMENT
GENERAL REQUIREMENTS
EN 62311:2008 :
ASSESSMENT OF ELECTRONIC AND ELECTRICAL EQUIPMENT
RELATED TO HUMAN EXPOSURE RESTRICTIONS FOR
ELECTROMAGNETIC FIELDS (0 HZ - 300 GHZ).
Lippo di Calderara, July 11th 2011
Paola Chientaroli
Quality Assurance Manager
Memor™
www.mobile.datalogic.com
World wide Sales Network
available from: www.mobile.datalogic.com/contacts
Datalogic Mobile S.r.l.
Via S. Vitalino, 13
40012 Lippo di Calderara di Reno
Bologna - Italy
Telephone: (+39) 051-3147011
Fax: (+39) 051-3147561
User’s Manual
822000891 (Rev. A)
©2008-2011 Datalogic Mobile S.r.l.
10/11
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement

Languages