HP LaserJet M1005 MFP User Guide

HP LaserJet M1005 MFP User Guide

LaserJet M1005 MFP

User Guide

M1005 www.hp.com/support/ljm1005

HP LaserJet M1005 MFP

User Guide

Copyright and License

© Copyright 2015 HP Development Company,

L.P.

Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws.

The information contained herein is subject to change without notice.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

Edition 2, 12/2016

Trademark Credits

Adobe ® , Adobe Photoshop

Incorporated.

® , Acrobat ® , and

PostScript

®

are trademarks of Adobe Systems

Microsoft®, Windows®, Windows® XP, and

Windows Vista® are U.S. registered trademarks of Microsoft Corporation.

UNIX ® is a registered trademark of The Open

Group.

ENERGY STAR ® and the ENERGY STAR registered U.S. marks.

® mark are

Table of contents

1 Device basics ................................................................................................................................................ 1

Device features ...................................................................................................................................................... 2

Device parts ........................................................................................................................................................... 3

Front view ............................................................................................................................................ 3

Back view ............................................................................................................................................. 3

Control panel ....................................................................................................................................... 4

2 Software ....................................................................................................................................................... 5

Minimum system requirements ............................................................................................................................ 6

Supported operating systems ............................................................................................................................... 6

Software installation ............................................................................................................................................. 7

Printer driver .......................................................................................................................................................... 8

Printer-driver Help .............................................................................................................................. 8

Changing printer-driver settings ........................................................................................................ 9

Software for Windows ......................................................................................................................................... 10

HP LaserJet Scan software ............................................................................................................... 10

Installing Windows device software ................................................................................................. 10

Uninstalling Windows device software ............................................................................................. 10

Software for Macintosh ....................................................................................................................................... 11

Installing Macintosh device software ............................................................................................... 11

Uninstalling Macintosh device software ........................................................................................... 11

3 Media specifications .................................................................................................................................... 13

General guidelines ............................................................................................................................................... 14

Choosing paper and other media ........................................................................................................................ 14

HP media ........................................................................................................................................... 14

Media to avoid ................................................................................................................................... 14

Media that can damage the device ................................................................................................... 15

Guidelines for using media .................................................................................................................................. 16

Paper ................................................................................................................................................. 16

Colored paper .................................................................................................................................... 17

ENWW iii

iv

Custom-size media ........................................................................................................................... 17

Labels ................................................................................................................................................ 17

Label construction .......................................................................................................... 17

Transparencies .................................................................................................................................. 17

Envelopes .......................................................................................................................................... 18

Envelope construction .................................................................................................... 18

Envelopes with double-side seams ................................................................................ 18

Envelopes with adhesive strips or flaps ......................................................................... 19

Envelope storage ............................................................................................................ 19

Card stock and heavy media ............................................................................................................. 19

Card stock construction .................................................................................................. 19

Card stock guidelines ...................................................................................................... 19

Letterhead and preprinted forms ..................................................................................................... 20

Supported media weights and sizes ................................................................................................................... 21

Printing and storage environment ...................................................................................................................... 22

4 Using the device .......................................................................................................................................... 23

Loading media ..................................................................................................................................................... 24

Loading documents to copy or scan ................................................................................................. 24

Loading input trays ........................................................................................................................... 24

Priority input tray ............................................................................................................ 24

Main input tray (tray 1) ................................................................................................... 25

Controlling print jobs ........................................................................................................................................... 26

Print-settings priorities .................................................................................................................... 26

Selecting a source ............................................................................................................................. 26

Selecting a type or size ..................................................................................................................... 26

Using the device control panel ............................................................................................................................ 27

Changing the control-panel display language ................................................................................. 27

Changing the default media size and type ....................................................................................... 27

To change the default media size .................................................................................. 27

To change the default media type ................................................................................. 28

5 Printing ...................................................................................................................................................... 29

Using features in the Windows printer driver ..................................................................................................... 30

Creating and using quick sets ........................................................................................................... 30

Creating and using watermarks ........................................................................................................ 31

Resizing documents .......................................................................................................................... 31

Setting a custom paper size from the printer driver ........................................................................ 32

Using different paper and printing covers ........................................................................................ 32

Printing a blank first page or last page ............................................................................................ 32

Printing multiple pages on one sheet of paper ................................................................................ 32

ENWW

Printing on both sides ....................................................................................................................... 33

Using features in the Macintosh printer driver ................................................................................................... 35

Creating and using presets ............................................................................................................... 35

Printing a cover page (Macintosh) .................................................................................................... 36

Printing multiple pages on one sheet of paper (Macintosh) ............................................................ 36

Printing on both sides (Macintosh) ................................................................................................... 37

Printing on special media .................................................................................................................................... 38

Using archive print ............................................................................................................................................... 38

Canceling a print job ............................................................................................................................................ 39

6 Copy ........................................................................................................................................................... 41

Starting a copy job ............................................................................................................................................... 42

Canceling a copy job ............................................................................................................................................ 42

Adjusting the copy quality ................................................................................................................................... 42

Adjusting the lighter/darker (contrast) setting .................................................................................................. 44

Reducing or enlarging copies .............................................................................................................................. 45

Adjusting the copy size ..................................................................................................................... 45

Copying multiple pages on one sheet of paper ................................................................................ 46

Changing the number of copies ........................................................................................................................... 47

Copying onto media of different types and sizes ............................................................................................... 48

Copying two-sided documents ............................................................................................................................ 50

Copying photos and books .................................................................................................................................. 52

Viewing copy settings .......................................................................................................................................... 53

7 Scan ........................................................................................................................................................... 55

Understanding scanning methods ...................................................................................................................... 56

Scanning by using HP LaserJet Scan (Windows) ................................................................................................. 57

Canceling a scan job ............................................................................................................................................. 57

Scanning by using other software ...................................................................................................................... 58

Using TWAIN-compliant and WIA-compliant software .................................................................... 58

Scanning from a TWAIN-enabled program .................................................................... 58

To scan from a TWAIN-enabled program .................................................... 58

Scanning from a WIA-enabled program (Windows XP or Windows Server 2003) ......... 58

To scan from a WIA-enabled program ......................................................... 58

Scanning a photo or a book ................................................................................................................................. 59

Scanning by using optical character recognition (OCR) software ...................................................................... 60

Readiris .............................................................................................................................................. 60

Scanner resolution and color .............................................................................................................................. 61

Resolution and color guidelines ....................................................................................................... 62

Resolution ....................................................................................................................... 62

Color ................................................................................................................................ 62

ENWW v

vi

8 Managing and maintaining the device ........................................................................................................... 63

Information pages ............................................................................................................................................... 64

Managing supplies ............................................................................................................................................... 65

Checking supplies status .................................................................................................................. 65

Storing supplies ................................................................................................................................ 65

Replacing and recycling supplies ...................................................................................................... 65

Redistribute toner ............................................................................................................................. 65

HP policy on non-HP supplies ........................................................................................................... 65

HP fraud hotline ................................................................................................................................ 66

Cleaning the device .............................................................................................................................................. 67

To clean the exterior ......................................................................................................................... 67

To clean the scanner glass ................................................................................................................ 67

To clean the lid backing ..................................................................................................................... 67

To clean the paper path .................................................................................................................... 68

Changing the print cartridge ............................................................................................................................... 69

9 Problem solving .......................................................................................................................................... 71

Problem-solving checklist ................................................................................................................................... 72

Clearing jams ....................................................................................................................................................... 74

Causes of jams .................................................................................................................................. 74

Tips to avoid jams ............................................................................................................................. 74

Where to look for jams ...................................................................................................................... 75

Input trays ......................................................................................................................................... 76

Output bin .......................................................................................................................................... 78

Print-cartridge area .......................................................................................................................... 78

Control-panel messages ..................................................................................................................................... 80

Alert and warning messages ............................................................................................................. 80

Alert and warning message tables ................................................................................. 80

Critical error messages ..................................................................................................................... 81

Critical error message tables .......................................................................................... 81

Print problems ..................................................................................................................................................... 83

Print quality problems ...................................................................................................................... 83

Improving print quality ................................................................................................... 83

Understanding print-quality settings .......................................................... 83

Identifying and correcting print defects ......................................................................... 84

Print-quality checklist .................................................................................. 84

General print-quality issues ......................................................................... 84

Media-handling problems ................................................................................................................. 88

Print-media guidelines ................................................................................................... 88

Solving print-media problems ........................................................................................ 89

ENWW

Performance problems ..................................................................................................................... 90

Copy problems ..................................................................................................................................................... 91

Preventing problems ......................................................................................................................... 91

Image problems ................................................................................................................................ 91

Media-handling problems ................................................................................................................. 92

Performance problems ..................................................................................................................... 94

Scan problems ..................................................................................................................................................... 95

Solving scanned-image problems .................................................................................................... 95

Scan-quality problems ...................................................................................................................... 96

Preventing problems ...................................................................................................... 96

Solving scan-quality problems ....................................................................................... 96

Control-panel display problems ......................................................................................................................... 97

Solving common Macintosh problems ................................................................................................................ 98

Problems with Mac OS X V10.3 and Mac OS X V10.4 ........................................................................ 98

Problem-solving tools ....................................................................................................................................... 100

Restoring the factory-set defaults ................................................................................................. 100

Reducing paper curl ........................................................................................................................ 100

Appendix A Accessories and ordering information .......................................................................................... 101

Supplies ............................................................................................................................................................. 102

Cable and interface accessories ........................................................................................................................ 102

User-replaceable parts ...................................................................................................................................... 102

Paper and other print media ............................................................................................................................. 102

Appendix B Service and support ..................................................................................................................... 105

HP limited warranty statement ......................................................................................................................... 106

UK, Ireland, and Malta ..................................................................................................................... 107

Austria, Belgium, Germany, and Luxemburg .................................................................................. 107

Belgium, France, and Luxemburg ................................................................................................... 108

Italy .................................................................................................................................................. 109

Spain ................................................................................................................................................ 109

Denmark .......................................................................................................................................... 110

Norway ............................................................................................................................................ 110

Sweden ............................................................................................................................................ 110

Portugal ........................................................................................................................................... 111

Greece and Cyprus ........................................................................................................................... 111

Hungary ........................................................................................................................................... 111

Czech Republic ................................................................................................................................ 112

Slovakia ........................................................................................................................................... 112

Poland ............................................................................................................................................. 112

Bulgaria ........................................................................................................................................... 113

ENWW vii

viii

Romania .......................................................................................................................................... 113

Belgium and the Netherlands ......................................................................................................... 113

Finland ............................................................................................................................................. 114

Slovenia ........................................................................................................................................... 114

Croatia ............................................................................................................................................. 114

Latvia ............................................................................................................................................... 114

Lithuania .......................................................................................................................................... 115

Estonia ............................................................................................................................................. 115

Russia .............................................................................................................................................. 115

HP's Premium Protection Warranty: LaserJet toner cartridge limited warranty statement ........................... 116

HP policy on non-HP supplies ........................................................................................................................... 117

HP anticounterfeit Web site .............................................................................................................................. 118

Data stored on the toner cartridge ................................................................................................................... 119

End User License Agreement ............................................................................................................................ 120

Customer self-repair warranty service ............................................................................................................. 124

Customer support .............................................................................................................................................. 125

Appendix C Device specifications ................................................................................................................... 127

Physical specifications ...................................................................................................................................... 128

Electrical specifications ..................................................................................................................................... 128

Power consumption .......................................................................................................................................... 128

Environmental specifications ............................................................................................................................ 128

Acoustic emissions ............................................................................................................................................ 129

Appendix D Environmental product stewardship program ............................................................................... 131

Protecting the environment .............................................................................................................................. 132

Ozone production .............................................................................................................................................. 132

Power consumption .......................................................................................................................................... 132

Toner consumption ........................................................................................................................................... 132

Paper use ........................................................................................................................................................... 133

Plastics ............................................................................................................................................................... 133

HP LaserJet print supplies ................................................................................................................................. 133

Paper .................................................................................................................................................................. 133

Material restrictions .......................................................................................................................................... 133

Disposal of waste equipment by users (EU and India) ..................................................................................... 133

Electronic hardware recycling ........................................................................................................................... 134

Brazil hardware recycling information ............................................................................................................. 134

Chemical substances ......................................................................................................................................... 134

Product Power Data per European Union Commission Regulation 1275/2008 .............................................. 134

Restriction on Hazardous Substances statement (India) ................................................................................. 134

Restriction on Hazardous Substances statement (Turkey) ............................................................................. 134

ENWW

Restriction on Hazardous Substances statement (Ukraine) ............................................................................ 135

Substances Table (China) .................................................................................................................................. 135

SEPA Ecolabel User Information (China) ........................................................................................................... 135

The regulation of the implementation on China energy label for printer, fax, and copier ............................. 136

Material Safety Data Sheet (MSDS) ................................................................................................................... 136

EPEAT ................................................................................................................................................................. 136

For more information ........................................................................................................................................ 136

Appendix E Regulatory information ............................................................................................................... 137

Declaration of conformity ................................................................................................................................. 138

Regulatory statements ..................................................................................................................................... 140

FCC regulations ............................................................................................................................... 140

Canada - Industry Canada ICES-003 Compliance Statement ......................................................... 140

EMC statement (Korea) ................................................................................................................... 140

Power cord instructions .................................................................................................................. 140

Laser safety ..................................................................................................................................... 140

Laser statement for Finland ........................................................................................................... 141

GS statement (Germany) ................................................................................................................ 142

Eurasian Conformity (Belarus, Kazakhstan, Russia) ...................................................................... 142

Glossary ....................................................................................................................................................... 143

Index ........................................................................................................................................................... 145

ENWW ix

x ENWW

1 Device basics

Device features

Device parts

ENWW 1

Device features

Print

Copy

Memory

Paper handling

Scan

Printer driver features

Interface connections

Environmental features

Economical printing

Accessibility

Prints letter-size pages at speeds up to 15 pages per minute (ppm) and A4-size pages at speeds up to 14 ppm

Prints at 600 dots per inch (dpi) and FastRes 1200 dpi

Includes adjustable settings to optimize print quality

Average yield for the standard black print cartridge is 2000 pages in accordance with ISO/IEC

19752. Actual yield depends on specific use.

Copies at 300 dots per inch (dpi)

For more information, see

Copy on page 41 .

Includes 32-megabyte (MB) random-access memory (RAM)

Priority input tray holds up to 10 pages

Tray 1 holds up to 150 sheets of print media or 10 envelopes

● Output bin holds up to 100 sheets of print media

Provides 1200 pixels per inch (ppi) full-color scanning

For more information, see

Scan on page 55 .

FastRes 1200 produces 1200-dots-per-inch (dpi) print quality for fast, high-quality printing of business text and graphics

Includes a Hi-Speed USB 2.0 port

ENERGY STAR®-qualified

Provides N-up printing (printing more than one page on a sheet). See

Printing multiple pages on one sheet of paper on page 32 or

Printing multiple pages on one sheet of paper

(Macintosh) on page 36

.

● Provides an EconoMode setting, which uses less toner

Online user guide is compatible with text screen-readers.

● Print cartridges can be installed and removed by using one hand.

All doors and covers can be opened by using one hand.

2 Chapter 1 Device basics ENWW

Device parts

Before using the HP LaserJet M1005, familiarize yourself with the parts of the device.

Front view

1

2

3

4

1

2

5

6

6 5

Flatbed scanner cover

Control panel

Cartridge-door release

Output bin

Priority input tray

Tray 1

4

3

Back view

7

7

8

9

Hi-Speed USB 2.0 port

Power switch

Power receptacle

8

9

ENWW Device parts 3

Control panel

1

1

2

2

3

4

5

6

7

8

9

Control-panel display

Left arrow button

3

4

5

8

9

6

7

Menu/Enter/OK

Cancel button

button

Right arrow button

More Copy Settings button

Lighter/Darker button

# Copies button

Start Copy button

Shows status information, menus, and error messages

● Navigates to the previous item in the list, or decreases the value of numeric items.

With some numeric items, pressing the button once decreases the value by 1, while pressing and holding the button decreases the value by 10.

Activates the control-panel menus

Clears an error condition when the condition is clearable

Saves the selected value for an item

Performs the action that is associated with the item that is highlighted on the control-panel display

Navigates to the next item in the list, or increases the value of numeric items. With some numeric items, pressing the button once increases the value by 1, while pressing and holding the button increases the value by 10.

Cancels the current print, copy, or scan job in process and expels all of the active pages from the paper path. The time that it takes to cancel the job depends on the size of the print job. (Press the button only once.) Also clears continuable errors that are associated with the canceled job.

● Exits the control-panel menus

Provides access to copy settings for the current copy job

Provides access to copy contrast settings for the current copy job

Provides a way to change the number of copies printed for a the current copy job

Starts a copy job

4 Chapter 1 Device basics ENWW

2 Software

Minimum system requirements

Supported operating systems

Software installation

Printer driver

Software for Windows

Software for Macintosh

ENWW 5

Minimum system requirements

In order to install and use the device software, your computer must meet the following minimum requirements:

Windows requirements

Pentium II (233 MHz) processor

64 MB of RAM

35 MB of disk space

SVGA 800x600 16-bit color monitor

Macintosh requirements

G3, G4, or G5 PowerPC processor

128 MB of RAM

30 to 50 MB of disk space

Supported operating systems

The device comes with software for the following operating systems:

Windows XP

Windows 2000

Windows Server 2003 (printer driver only)

Mac OS X V10.3 and later

6 Chapter 2 Software ENWW

Software installation

If the computer meets the recommended minimum requirements, the installation process includes the following software.

HP LaserJet Scan software program and driver

Readiris OCR (not installed with other software; separate installation is required)

Printer drivers (Windows and Mac)

TWAIN driver (Mac)

ENWW Software installation 7

Printer driver

The device comes with software for Windows and Macintosh that allows the computer to communicate with the device. This software is called a printer driver. Printer drivers provide access to device features, such as printing on custom-sized paper, resizing documents, and inserting watermarks.

NOTE:

The most recent drivers are available at www.hp.com

. Depending on the configuration of Windowsbased computers, the installation program for the product software automatically checks the computer for

Internet access in order to obtain the latest drivers.

Printer-driver Help

Printer-driver Help is separate from program Help. The printer-driver help provides explanations for the buttons, check boxes, and drop-down lists that are in the printer driver. It also includes instructions for performing common printing tasks, such as printing on both sides, printing multiple pages on one sheet, and printing the first page or covers on different paper.

Activate the printer-driver Help screens in one of the following ways:

Windows

In the printer driver Properties dialog box, click the Help button.

Press the F1 key on the computer keyboard.

Click the question-mark symbol in the upper-right corner of the printer driver.

Right-click on any item in the driver, and then click What's

This?.

Macintosh

In the Print dialog box, click the ? button.

8 Chapter 2 Software ENWW

Changing printer-driver settings

Use one of the following methods to open the printer drivers from the computer in order to change settings:

Operating System

Windows 2000, XP, and Server 2003

Mac OS X V10.3 and

Mac OS X V10.4

To change the settings for all print jobs until the software program is closed

1.

On the File menu in the software program, click

Print.

2.

Select the name of the printer, and then click

Properties or Preferences.

The steps can vary; this procedure is most common.

1.

On the File menu, click Print.

2.

Change the settings that you want on the various pop-up menus.

To change the print job default settings (for example, select a specific media type or size by default)

1.

Click Start, click Settings, and then click Printers or

Printers and Faxes.

2.

Right-click the printer icon, and then select Printing

Preferences.

1.

On the File menu, click Print.

2.

Change the settings that you want on the various pop-up menus.

3.

On the Presets pop-up menu, click Save as and type a name for the preset.

These settings are saved in the

Presets menu. To use the new settings, you must select the saved preset option every time you open a program and print.

To change the configuration settings (for example, enable or disable manual duplexing)

1.

Click Start, click Settings, and then click Printers or

Printers and Faxes.

2.

Right-click the printer icon, and then select Properties.

3.

Click the Device Settings tab.

1.

Open Printer Setup Utility by selecting the hard drive, clicking Applications, clicking Utilities, then double-clicking Printer

Setup Utility.

2.

Click on the print queue.

3.

On the Printers menu, click

Show Info.

4.

Click the Installable Options menu.

ENWW Printer driver 9

Software for Windows

See the getting started guide for installation instructions, and see the Readme file for the latest software information.

HP LaserJet Scan software

The software CD includes the HP LaserJet Scan software. See the Readme file that is provided on the CD for additional included software and for supported languages.

Installing Windows device software

Insert the software CD that came with the printer into the computer CD-ROM drive. Follow the on-screen

installation instructions.

NOTE:

If the Welcome screen does not open, click Start on the Windows task bar, click Run, type Z:

\setup

(where Z is your CD drive letter), and click OK.

Uninstalling Windows device software

1.

Click Start, and then click All Programs.

2.

Click HP, and then click HP LaserJet M1005 MFP.

3.

Click Uninstall HP LaserJet M1005 MFP, and then follow the onscreen instructions to remove the software.

10 Chapter 2 Software ENWW

Software for Macintosh

This section describes how to install Macintosh printing system software.

Installing Macintosh device software

1.

Connect a USB cable between the USB port on the printer and the USB port on the computer. Use a standard 2-meter (6.56-foot) USB cable.

2.

Insert the printer CD into the CD-ROM drive and run the installer.

The Printer Setup Utility should automatically launch. If it does not launch, continue to the next step.

3.

Double-click the hard drive icon on the desktop.

4.

Open the Applications folder, and then open the Utilities folder.

5.

Double-click Printer Setup Utility, and then follow the onscreen instructions to install the software.

Uninstalling Macintosh device software

1.

Double-click the hard drive icon on the desktop.

2.

Open the Applications folder, and then open the Utilities folder.

3.

Double-click Printer Setup Utility.

4.

In the Printer Setup Utility, select the device, and then click Delete on the toolbar.

ENWW Software for Macintosh 11

12 Chapter 2 Software ENWW

3 Media specifications

General guidelines

Choosing paper and other media

Guidelines for using media

Supported media weights and sizes

Printing and storage environment

ENWW 13

General guidelines

Some media might meet all of the guidelines in this manual and still not produce satisfactory results. This problem might be the result of improper handling, unacceptable temperature and humidity levels, or other variables over which HP has no control.

Before purchasing large quantities of print media, always test a sample and make sure that the print media meets the requirements specified in this user guide and in the HP LaserJet Printer Family Print Media Guide, which you can view on the Web at www.hp.com/support/ljpaperguide . For ordering information, see

Accessories and ordering information on page 101 .

CAUTION:

Using media that does not meet HP specifications can cause problems for the device, requiring repair. This repair is not covered by the HP warranty or service agreements.

The device accepts a variety of media, such as cut-sheet paper (including up to 100% recycled-fiber-content paper), envelopes, labels, transparencies, LaserJet glossy paper, HP LaserJet Tough paper, and custom-size paper. Properties such as weight, composition, grain, and moisture content are important factors that affect performance and output quality. Media that does not meet the guidelines outlined in this manual can cause the following problems:

Poor print quality

Increased jams

Premature wear on the device, requiring repair

Choosing paper and other media

Properties such as weight, grain, and moisture content are important factors that affect performance and quality. To achieve the best possible print quality, only use high-quality media that is designed for laser printers. See

Guidelines for using media on page 16 for detailed paper and media specifications.

NOTE:

Always test a sample of the media before you purchase large quantities. Your media supplier should understand the requirements specified in the HP LaserJet Printer Family Print Media Guide (HP part number

5963-7863). See Guidelines for using media on page 16 for more information.

HP media

HP recommends that you use HP LaserJet media in the device.

Media to avoid

The device can handle many types of media. Using media that is outside the specifications degrades print quality and increases the chance of jams occurring.

Do not use media that is too rough.

Do not use media that contains cutouts or perforations other than standard 3-hole punched paper.

Do not use multipart forms.

Do not use paper that contains a watermark if you are printing solid patterns.

14 Chapter 3 Media specifications ENWW

Media that can damage the device

In rare circumstances media can damage the device. Avoid the following types of media to prevent possible damage:

Do not use media with staples attached.

Do not use transparencies designed for inkjet printers or other low-temperature printers. Use only transparencies that are specified for use with HP LaserJet printers.

Do not use photo paper intended for inkjet printers.

Do not use paper that is embossed or coated and is not designed for the temperature of the imagefuser. Select media that can tolerate temperatures of 200°C (392°F) for 0.1 second. HP manufactures a media that is designed for the device.

Do not use letterhead paper that was produced with low-temperature dyes or thermography.

Preprinted forms or letterhead must use inks that can tolerate temperatures of 200°C (392°F) for

0.1 second.

Do not use any media that produces emissions, or that melts, offsets, or discolors when exposed to

200°C (392°F) for 0.1 second.

To order HP LaserJet printing supplies, go to www.hp.com/go/ljsupplies in the U.S. or to www.hp.com/ghp/ buyonline.html/ worldwide.

ENWW Choosing paper and other media 15

Guidelines for using media

The following sections provide guidelines and instructions for printing on transparencies, envelopes, and other special media. Guidelines and specifications are included to help you select media that optimizes print quality and avoid media that can cause jams or damage the device.

Paper

For best results, use conventional 80-g/m

2

or 20-lb paper. Make sure that the paper is of good quality and free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, voids, and curled or bent edges.

If you are unsure about what type of paper you are loading (such as bond or recycled), check the label on the package of paper.

Some paper causes print quality problems, jamming, or damage to the device.

Symptom

Poor print quality or toner adhesion

Problems with feeding

Dropouts, jamming, or curl

Increased gray background shading

Excessive curl

Problems with feeding

Jamming or damage to device

Problems with feeding

Problem with paper

Too moist, too rough, too smooth, or embossed

Stored improperly

Might be too heavy

Too moist, wrong grain direction, or shortgrain construction

Cutouts or perforations

Ragged edges

Solution

Try another kind of paper that has a smoothness rating of 100-250 Sheffield and has 4-6 % moisture content.

Check the device and make sure that the appropriate media type has been selected.

Store paper flat in its moisture-proof wrapping.

Use lighter paper.

Use long-grain paper.

Check the device and make sure that the appropriate media type has been selected.

Do not use paper with cutouts or perforations.

Use good quality paper.

NOTE:

The device uses heat and pressure to fuse toner to the paper. Make sure that any colored paper or preprinted forms use inks that are compatible with the fuser temperature of 200°C (392°F) for 0.1 second.

Do not use letterhead that is printed with low-temperature inks, such as those used in some types of thermography.

Do not use raised letterhead.

Do not use transparencies that are designed for inkjet printers or other low-temperature printers. Use only transparencies that are specified for use with HP LaserJet printers.

16 Chapter 3 Media specifications ENWW

Colored paper

Colored paper should be of the same high quality as white xerographic paper.

Pigments used must be able to withstand the fuser temperature of 200°C (392°F) for 0.1 second without deterioration.

Do not use paper with a colored coating that was added after the paper was produced.

Custom-size media

Use the main input tray for multiple sheets. See

Supported media weights and sizes on page 21 for the

supported media sizes.

CAUTION:

Make sure that the sheets are not stuck together before you load them.

Labels

HP recommends that you print labels from the priority input tray. See

Loading media on page 24 for more

information.

CAUTION:

Do not feed a sheet of labels through the device more than once. The adhesive degrades and might damage the device.

Label construction

When selecting labels, consider the quality of the following components:

Adhesives: The adhesive material should be stable at 200°C (392°F), the maximum fuser temperature.

Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets that have spaces between the labels, causing serious jams.

Curl: Before printing, labels must lie flat with no more than 13 mm (0.5 inch) of curl in any direction.

Condition: Do not use labels with wrinkles, bubbles, or other indications of separation.

Transparencies

Transparencies must be able to withstand 200°C (392°F), the maximum fuser temperature.

CAUTION:

You can print transparencies from the 150-sheet tray (tray 1). However, do not load more than

75 transparencies at one time into the tray.

ENWW Guidelines for using media 17

Envelopes

HP recommends that you print envelopes from the priority input tray. See

Loading media on page 24 for

more information.

Envelope construction

Envelope construction is critical. Envelope fold lines can vary considerably, not only between manufacturers, but also within a box from the same manufacturer. Successful printing on envelopes depends upon the quality of the envelopes. When selecting envelopes, consider the following components:

Weight: The weight of the envelope paper should not exceed 90 g/m 2 (24 lb), or jamming might result.

Construction: Before printing, envelopes should lie flat with less than 6 mm (0.25 inch) of curl, and should not contain air. Envelopes that trap air can cause problems. Do not use envelopes that contain clasps, snaps, tie strings, transparent windows, holes, perforations, cutouts, synthetic materials, stamping, or embossing. Do not use envelopes with adhesives that require pressure to seal them.

Condition: Make sure that the envelopes are not wrinkled, nicked, or otherwise damaged. Make sure that the envelopes do not have any exposed adhesive.

Envelopes with double-side seams

An envelope with double-side-seam construction has vertical seams at both ends of the envelope rather than diagonal seams. This style might be more likely to wrinkle. Make sure that the seam extends all the way to the corner of the envelope as shown in the following illustration:

1

2

1

2

Acceptable envelope construction

Unacceptable envelope construction

18 Chapter 3 Media specifications ENWW

Envelopes with adhesive strips or flaps

Envelopes with a peel-off adhesive strip or with more than one flap that folds over to seal must use adhesives compatible with the heat and pressure in the device: 200°C (392°F). The extra flaps and strips might cause wrinkling, creasing, or jams.

Envelope storage

Proper storage of envelopes contributes to good print quality. You should store envelopes flat. If air is trapped in an envelope, creating an air bubble, the envelope might wrinkle during printing.

Card stock and heavy media

You can print many types of card stock from the input tray, including index cards and postcards. Some card stock performs better than others because its construction is better suited for feeding through a laser printer.

For optimum performance, do not use paper heavier than 157 g/m

2

(42 lb). Paper that is too heavy might cause misfeeds, stacking problems, jams, poor toner fusing, poor print quality, or excessive mechanical wear.

NOTE:

You might be able to print on heavier paper if you do not fill the input tray to capacity and if you use paper with a smoothness rating of 100-180 Sheffield.

In either the software program or the printer driver, select Heavy (106 g/m or Cardstock (135 g/m 2 to 216 g/m 2

2 to 163 g/m 2 ; 28- to 43-lb bond)

; 50- to 80-lb cover) as the media type, or print from a tray that is configured for heavy paper. Because this setting affects all print jobs, it is important to return the device back to its original settings after the job has printed.

Card stock construction

Smoothness: 135-157 g/m

100-180 Sheffield. 60-135 g/m

100-250 Sheffield.

2 (36-42 lb) card stock should have a smoothness rating of

2 (16-36 lb) card stock should have a smoothness rating of

Construction: Card stock should lie flat with less than 5 mm (0.2 inch) of curl.

Condition: Make sure that the card stock is not wrinkled, nicked, or otherwise damaged.

Card stock guidelines

Set margins at least 2 mm (0.08 inch) away from the edges.

● Use tray 1 for card stock (135 g/m 2 to 216 g/m 2 ; 50- to 80-lb cover).

ENWW Guidelines for using media 19

Letterhead and preprinted forms

Letterhead is premium paper that often has a watermark, sometimes uses cotton fiber, and is available in a wide range of colors and finishes with matching envelopes. Preprinted forms can be made of a broad spectrum of paper types ranging from recycled to premium.

Many manufacturers now design these grades of paper with properties optimized for laser printing and advertise the paper as laser compatible or laser guaranteed. Some of the rougher surface finishes, such as cockle, laid, or linen, might require the special fuser modes that are available on some printer models to achieve adequate toner adhesion.

NOTE:

Some page-to-page variation is normal when printing with laser printers. This variation cannot be observed when printing on plain paper. However, this variation is obvious when printing on preprinted forms because the lines and boxes are already placed on the page.

To avoid problems when using preprinted forms, embossed paper, and letterhead, observe the following guidelines:

Avoid using low-temperature inks (the kind used with some types of thermography).

Use preprinted forms and letterhead paper that have been printed by offset lithography or engraving.

Use forms that have been created with heat-resistant inks that will not melt, vaporize, or release emissions when heated to 200°C (392°F) for 0.1 second. Typically, oxidation-set or oil-based inks meet this requirement.

When the form is preprinted, be careful not to change the moisture content of the paper, and do not use materials that change the paper's electrical or handling properties. Seal the forms in moisture-proof wrap to prevent moisture changes during storage.

Avoid processing preprinted forms that have a finish or coating.

Avoid using heavily embossed or raised-letterhead papers.

Avoid papers that have heavily textured surfaces.

Avoid using offset powders or other materials that prevent printed forms from sticking together.

NOTE:

To print a single-page cover letter on letterhead, followed by a multiple-page document, feed the letterhead face up in the priority input tray, and load the standard paper in the main input tray (tray 1). The device automatically prints from the priority input tray first.

20 Chapter 3 Media specifications ENWW

Supported media weights and sizes

For optimum results, use conventional 80 to 90 g/m 2 (20 to 24 lb) photocopy paper. Verify that the paper is of good quality and is free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, curls, and bent edges.

NOTE:

The device supports a wide range of standard and custom sizes of print media. The capacity of trays and bins can vary depending on media weight and thickness and on environmental conditions. Use only transparencies that are designed for use with HP LaserJet printers. Inkjet and monochrome transparencies are not supported for the device.

Table 3-1 Priority input tray specifications

Media Dimensions

1

Weight Capacity

2

Paper Minimum: 89 x 44 mm (3.5 x 1.75

inches)

Maximum: 216 x 356 mm (8.5 x

14 inches)

Same as the preceding listed minimum and maximum sizes

42 to 260 g/m 2 (11 to 69 lb) Up to 10 sheets of 80 g/m paper

2 or 20 lb

HP Cover paper

3

Transparencies and opaque film

Labels

4

Envelopes

3

4

1

2

203 g/m

2

(75 lb cover)

Thickness: 0.10 to 0.13 mm (3.9 to

5.1 mils)

1 sheet

1 transparency

Thickness: up to 0.23 mm (up to 9 mils)

1 sheet of labels

Up to 90 g/m

2

(16 to 24 lb) Up to 10

The device supports a wide range of standard and custom sizes of print media. Check the printer driver for supported sizes.

Capacity can vary depending on media weight and thickness, and environmental conditions.

HP does not guarantee results when printing with other types of heavy paper.

Smoothness: 100 to 250 (Sheffield).

Table 3-2 Tray 1 specifications

Media Dimensions

1

Weight Capacity

2

Minimum size

Maximum size

Letter

A4

Legal

A5

B5 (ISO)

B5 (JIS)

76 x 127 mm (3 x 5 inches)

216 x 356 mm (8.5 x 14 inches)

216 x 279 mm (8.5 x 11 inches)

210 x 297 mm (8.3 x 11.7 inches)

216 x 356 mm (8.5 x 14 inches)

148 x 210 mm (5.8 x 8.3 inches)

176 x 250 mm (6.9 x 9.9 inches)

182 x 257 mm (7.2 x 10 inches)

60 to 163 g/m 2 (16 to 43 lb) 150 sheets of 80 g/m paper

Executive 191 x 267 mm (7.3 x 10.5 inches)

8.5 x 13 inches

1

2

216 x 330 mm (8.5 x 13 inches)

The device supports a wide range of standard sizes of print media. Check the printer driver for supported sizes.

Capacity can vary depending on the media weight and thickness, and environmental conditions.

2 (20 lb)

ENWW Supported media weights and sizes 21

Printing and storage environment

Ideally, the printing and media-storage environment should be at or near room temperature, and not too dry or too humid. Remember that paper absorbs and loses moisture rapidly.

Heat works with humidity to damage paper. Heat causes the moisture in paper to evaporate, while cold causes it to condense on the sheets. Heating systems and air conditioners remove most of the humidity from a room. As paper is opened and used, it loses moisture, causing streaks and smudging. Humid weather or water coolers can cause the humidity to increase in a room. As paper is opened and used it absorbs any excess moisture, causing light print and dropouts. Also, as paper loses and gains moisture it can distort. This issue can cause jams.

As a result, paper storage and handling are as important as the paper-making process itself. Paper storage environmental conditions directly affect the feed operation and print quality.

Care should be taken not to purchase more paper than can be easily used in a short time (about three months). Paper stored for long periods can experience heat and moisture extremes, which can cause damage. Planning is important to prevent damage to a large supply of paper.

Unopened paper in sealed reams can remain stable for several months before use. Opened packages of paper have more potential for environmental damage, especially if they are not wrapped with a moistureproof barrier.

The media-storage environment should be maintained to ensure optimum performance. The required condition is 20° to 24°C (68° to 75°F), with a relative humidity of 45% to 55%. The following guidelines are helpful when evaluating the storage environment:

Print media should be stored at or near room temperature.

The air should not be too dry or too humid.

The best way to store an opened ream of paper is to rewrap it tightly in its moisture-proof wrapping. If the device environment is subject to extremes, unwrap only the amount of paper to be used during the day's operation to prevent unwanted moisture changes.

Avoid storing paper and print media near heating and air conditioning vents or near windows and doors that are frequently open.

22 Chapter 3 Media specifications ENWW

4 Using the device

Loading media

Controlling print jobs

Using the device control panel

ENWW 23

Loading media

The following sections describe how to load media into the different input trays.

CAUTION:

Printing on wrinkled, folded, or damaged media can cause jams. See

Guidelines for using media on page 16 for more information.

Loading documents to copy or scan

Use these instructions to load originals into the device for scanning.

1.

Lift the flatbed scanner cover.

2.

Place the original document face-down on the flatbed scanner with the upper-left corner of the document at the lower-right corner of the glass.

3.

Gently close the lid.

The document is ready to be copied or scanned.

Loading input trays

Priority input tray

The priority input tray on the HP LaserJet M1005 MFP holds up to 10 sheets of media up to 80 g/m 2 (20 lb) in weight or one envelope, transparency, or card. Load media with the top forward and the side to be printed facing up. To prevent jams and skewing, always adjust the side media guides before feeding the media.

24 Chapter 4 Using the device ENWW

Main input tray (tray 1)

The main input tray holds up to 150 pages of 80 g/m

2

or 20 lb paper or fewer pages of heavier media (15 mm

(0.6 in) or less stack height). Load media with the top forward and the side to be printed facing down. To prevent jams and skewing, always adjust the side and rear media guides.

NOTE:

When you add new media, make sure that you remove all of the media from the input tray and straighten the stack of new media. This helps to prevent multiple sheets of media from feeding into the device, which can cause jams.

ENWW Loading media 25

Controlling print jobs

This section provides basic printing instructions. When making changes to printing settings, follow the hierarchy of how changes are prioritized.

NOTE:

The names of commands and dialog boxes might vary depending on your software program.

Print-settings priorities

When making changes to printing settings, follow the hierarchy of how changes are prioritized. (Note that the names of commands and dialog boxes might vary depending on your software program.)

Page Setup dialog box: This dialog box opens when you click Page Setup or a similar command on the

File menu in your software program. This dialog box is part of the program in which you are working.

Settings that are changed here override settings that are changed anywhere else.

Print dialog box: This dialog box opens when you click Print, Print Setup, or a similar command on the

File menu in your software program. It is also part of the program, but it has a lower priority than the

Page Setup dialog box. Settings that are changed in the Print dialog box do not override settings that are changed in the Page Setup dialog box. Settings that are changed here do override settings that are changed in the printer driver.

Printer driver: The printer driver opens when you click Properties in the Print dialog box. Settings that are changed here do not override settings that are changed anywhere else. (For Macintosh, the printer driver settings are integrated into the Print dialog box.)

Selecting a source

You can print by source (tray) or by type or size. To print by source, follow these steps. For Macintosh operating systems, types and sizes are grouped together under the Paper Source pop-up menu.

Windows: In the Print dialog box in your software program, select the Source (tray), if possible.

Otherwise, select a tray from the Source is field from the Paper tab in your printer driver.

Mac OS X V10.3 and later: From the Print dialog box, select the tray or type of media on the Paper popup menu.

Selecting a type or size

You can print by source (tray) or by type or size. If you are printing on special print media, such as heavy paper, it is important to print by type to achieve good results. To print by type or size, follow these steps. For

Macintosh operating systems, types and sizes are all grouped together under the Paper Source pop-up menu.

Windows: In the printer driver, select a type in the Type is field of the Paper tab. Or, select a size from the Size is field. For some paper, such as letterhead, you select both a type and size.

Mac OS X V10.3 and later: In the Print dialog box, select the tray or type of media on the Paper pop-up menu.

26 Chapter 4 Using the device ENWW

Using the device control panel

You can configure settings at the control panel.

Changing the control-panel display language

Use this procedure to print reports or to show messages on the device control-panel display in a language other than the default for your country/region.

1.

Press Menu/Enter .

2.

Use the < or the > button to select System setup, and then press Menu/Enter .

3.

Use the < or the > button to select Language, and then press Menu/Enter .

4.

Use the < or the > button to select the language that you want.

5.

Press Menu/Enter to save the selection.

Changing the default media size and type

Set the size and type of media that you usually load in the input tray. The device uses these settings for copying and printing.

To change the default media size

1.

Press Menu/Enter .

2.

Use the < or the > button to select System setup, and then press Menu/Enter .

3.

Use the < or the > button to select Paper setup, and then press Menu/Enter .

4.

Use the < or the > button to select Def. paper size, and then press Menu/Enter .

5.

Use the < or the > button to select the size.

6.

Press Menu/Enter to save the selection.

ENWW Using the device control panel 27

To change the default media type

1.

Press Menu/Enter .

2.

Use the < or the > button to select System setup, and then press Menu/Enter .

3.

Use the < or the > button to select Paper setup, and then press Menu/Enter .

4.

Use the < or the > button to select Def. paper type, and then press Menu/Enter .

5.

Use the < or the > button to select the type.

6.

Press Menu/Enter to save the selection.

28 Chapter 4 Using the device ENWW

5 Printing

This section provides information about common printing tasks.

Using features in the Windows printer driver

Using features in the Macintosh printer driver

Printing on special media

Using archive print

Canceling a print job

ENWW 29

Using features in the Windows printer driver

When you print from a software program, many of the product features are available from the printer driver.

For complete information about the features that are available in the printer driver, see the printer-driver

Help. The following features are described in this section:

Creating and using quick sets

Creating and using watermarks

Resizing documents

Setting a custom paper size from the printer driver

Using different paper and printing covers

Printing a blank first page or last page

Printing multiple pages on one sheet of paper

Printing on both sides

NOTE:

Settings in the printer driver and software program generally override control-panel settings.

Software-program settings generally override printer-driver settings.

Creating and using quick sets

Use quick sets to save the current driver settings for reuse. For example, you can save the page-orientation, print-on-both-sides, and paper-source settings in a quick set. Quick sets are available on most printer-driver tabs. You can save up to 10 Print Task Quick Sets.

NOTE:

The printer driver might report that 10 Print Task Quick Sets have been defined when fewer than 10 are visible. Some predefined Print Task Quick Sets, which do not apply to your product, might be included and are counted in the total number.

To create a quick set

1.

Open the printer driver (see Changing printer-driver settings on page 9 ).

2.

Select the print settings that you want to use.

3.

In the Quick Sets box, type a name for the selected settings (for example "Quarterly Report" or "My

Project Status").

4.

Click Save.

To use quick sets

1.

Open the printer driver (see Changing printer-driver settings on page 9 ).

2.

Select the quick set that you want to use from the Quick Sets drop-down list.

3.

Click OK. The product is now set to print according to the saved settings in the quick set.

NOTE:

To restore printer-driver default settings, select Default Print Settings from the Quick Sets dropdown list.

30 Chapter 5 Printing ENWW

Creating and using watermarks

A watermark is a notice, such as "Confidential," that is printed in the background of each page of a document.

To use an existing watermark

1.

Open the printer driver (see

Changing printer-driver settings on page 9 ).

2.

From the Effects tab, click the Watermarks drop-down list.

3.

Click the watermark that you want to use.

4.

If you want the watermark to appear only on the first page of the document, click First Page Only.

5.

Click OK. The product is now set to print the watermark that you have selected.

To remove the watermark, click (none) in the Watermarks drop-down list.

Resizing documents

Use the document resizing options to scale a document to a percentage of its normal size. You can also choose to print a document on a different size paper, with or without scaling.

To reduce or enlarge a document

1.

Open the printer driver (see

Changing printer-driver settings on page 9 ).

2.

On the Effects tab, next to % of normal size, type the percentage by which you want to reduce or enlarge your document.

You can also use the scroll bar to adjust the reduce or enlarge percentage.

3.

Click OK. The product is now set to scale the document to the reduce or enlarge percentage that you selected.

To print a document onto a different paper size

1.

Open the printer driver (see

Changing printer-driver settings on page 9 ).

2.

On the Effects tab, click Print Document On.

3.

Select the target paper size to print on.

4.

To print the document on the target paper size without scaling it to fit, make sure that the Scale to Fit option is not selected.

5.

Click OK. The product is now set to print the document as you specified.

ENWW Using features in the Windows printer driver 31

Setting a custom paper size from the printer driver

To set a custom paper size

1.

Open the printer driver (see Changing printer-driver settings on page 9 ).

2.

On the Paper/Quality tab, click Custom.

3.

On the Custom Paper Size window, type the name of the custom paper size.

4.

Type the paper-size length and width. If you type a size that is too small or too large, the driver automatically adjusts the size to the minimum or maximum size that is allowed.

5.

If necessary, click the button to change the unit of measure between millimeters and inches.

6.

Click Save.

7.

Click Close. The product is now set to print the document on the custom-size paper that you selected.

The name that you saved appears in the paper-size list for future use.

Using different paper and printing covers

Follow these instructions for printing a first page that is different from other pages in the print job.

1.

Open the printer driver (see Changing printer-driver settings on page 9 ).

2.

On the Paper/Quality tab, select the appropriate paper for the first page of the print job.

3.

Click Use different paper.

4.

In the list box, click the pages or covers that you want to print on different paper.

5.

To print front or back covers, you must also select Add Blank or Preprinted Cover.

-or-

Select the appropriate paper type or source for the other pages of the print job. The product is now set to print the document on the paper that you selected.

NOTE:

The paper size must be the same for all pages of the print job.

Printing a blank first page or last page

1.

Open the printer driver (see Changing printer-driver settings on page 9 ).

2.

On the Paper/Quality tab, click Use different paper.

3.

In the list box, click Front Cover or Back Cover.

4.

Click Add Blank or Preprinted Cover.

Printing multiple pages on one sheet of paper

You can print more than one page on a single sheet of paper. This feature is available in some drivers and provides a cost-effective way to print draft pages.

To print more than one page on a sheet of paper, look for a layout or pages-per-sheet option in the driver.

(This is sometimes called 2-up, 4-up, or n-up printing.)

32 Chapter 5 Printing ENWW

1.

Open the printer driver (see

Changing printer-driver settings on page 9 ).

2.

Click the Finishing tab.

3.

In the section for Document Options, select the number of pages that you want to print on each sheet

(1, 2, 4, 6, 9, or 16).

4.

If the number of pages is greater than 1, select the correct options for Print Page Borders and Page

Order.

Click Print Page Borders if you want to print a border around each page on the sheet.

Click Page Order to select the order and placement of the pages on the sheet.

5.

Click OK. The product is now set to print the number of pages per sheet that you have selected.

Printing on both sides

NOTE:

The printer driver also contains instructions and graphics for manually duplexing.

1.

In the software program, open the device properties (printer driver).

2.

On the Finishing tab, select Print on Both Sides (Manually).

NOTE:

If the Print on Both Sides option is dimmed or unavailable, open the device properties (printer driver). On the Device Settings tab or the Configure tab, select Allow Manual Duplexing, and then click

OK. Repeat steps 1 and 2.

3.

Print the document.

4.

After one side has been printed, remove the remaining media from the input tray, and set it aside until after you finish your manual duplexing job.

ENWW Using features in the Windows printer driver 33

5.

Without changing the orientation, remove the printed stack from the output bin, and then straighten the stack.

6.

Maintaining the same orientation, place the stack of media in the input tray again. The printed side should be facing down with the top edge feeding into the device first.

7.

On the device control panel, click OK and wait for the second side to print.

34 Chapter 5 Printing ENWW

Using features in the Macintosh printer driver

When you print from a software program, many of the features are available from the printer driver. For complete information about the features that are available in the printer driver, see the printer-driver Help.

The following features are described in this section:

Creating and using presets

Printing a cover page (Macintosh)

Printing multiple pages on one sheet of paper (Macintosh)

Printing on both sides (Macintosh)

NOTE:

Settings in the printer driver and software program generally override control-panel settings.

Software-program settings generally override printer-driver settings.

Creating and using presets

Use presets to save the current driver settings for reuse. For example, you can save the page orientation, print-on-both-sides feature, and paper-type settings in a preset.

To create a preset

1.

Open the printer driver (see

Changing printer-driver settings on page 9 ).

2.

Select the print settings that you want to use.

3.

In the Presets box, click Save As..., and type a name for the preset (for example "Quarterly Report" or

"My Project Status").

4.

Click OK.

To use presets

1.

Open the printer driver (see

Changing printer-driver settings on page 9 ).

2.

In the Presets menu, select the preset that you want to use.

NOTE:

To restore printer-driver default settings, select Standard from the Presets pop-up menu.

ENWW Using features in the Macintosh printer driver 35

Printing a cover page (Macintosh)

If you want to, you can print a separate cover page for your document that includes a message (such as

“Confidential”).

1.

Open the printer driver (see Changing printer-driver settings on page 9 ).

2.

On the Cover Page pop-up menu, select whether to print the cover page Before Document or After

Document.

3.

If you are using Mac OS X V10.3 or Mac OS X V10.4, in the Cover Page Type pop-up menu, select the message that you want to print on the cover page.

NOTE:

To print a blank cover page, select Standard as the Cover Page Type.

Printing multiple pages on one sheet of paper (Macintosh)

You can print more than one page on a single sheet of paper. This feature provides a cost-effective way to print draft pages.

1.

Open the printer driver (see Changing printer-driver settings on page 9 ).

2.

Click the Layout pop-up menu.

3.

Next to Pages per Sheet, select the number of pages that you want to print on each sheet (1, 2, 4, 6, 9, or 16).

4.

If the number of pages is greater than 1, next to Layout Direction, select the order and placement of the pages on the sheet.

5.

Next to Borders, select the type of border to print around each page on the sheet.

36 Chapter 5 Printing ENWW

Printing on both sides (Macintosh)

1.

On the Print dialog, select Manual Duplex.

2.

In the Manual Duplex area, select Print on Both Sides (Manually).

3.

Print the document.

4.

After one side has been printed, remove the remaining media from the input tray, and set it aside until after you finish your manual duplexing job.

5.

Without changing the orientation, remove the printed stack from the output bin, and then straighten the stack.

6.

Maintaining the same orientation, place the stack of media in the input tray again. The printed side should be facing down with the top edge feeding into the device first.

ENWW

7.

On the device control-panel, click OK and wait for the second side to print.

Using features in the Macintosh printer driver 37

Printing on special media

Make sure that the paper or print media that you are using meets HP specifications. See Media specifications on page 13 . Generally, smoother paper provides better results.

1.

Open the media input tray and remove any media.

2.

Load the media. Make sure that the top of the media is forward and the side to be printed on is facing up.

3.

Adjust the media guides to the length and width of the media.

4.

For Windows printer drivers, on the Paper tab or the Paper/Quality tab, select your media type from the Type is: drop-down list.

For Macintosh printer drivers, on the Paper/Quality tab or the Paper tab (the Paper Type/Quality tab for some Macintosh drivers), select your media type.

CAUTION:

Be sure to set the correct media type in the device settings. The device adjusts the fuser temperature according to the media type setting. When printing on special media such as transparencies or labels, this adjustment prevents the fuser from damaging the media as it passes through the device.

5.

Print the document.

Using archive print

Archive print produces output that reduces toner smearing and dusting. Use archive print to create documents that you want to preserve.

1.

On the device control panel, press Menu/Enter .

2.

Use the < or the > button to select Service, and then press Menu/Enter .

3.

Use the < or the > button to select Archive print, select On or Off, and then press Menu/Enter .

38 Chapter 5 Printing ENWW

Canceling a print job

If a print job is currently printing, you can cancel it by pressing Cancel on the device control panel.

CAUTION:

Pressing Cancel clears the job that the device is currently processing. If more than one process is running, pressing Cancel clears the process that currently appears on the control panel.

You can also cancel a print job from a software program or a print queue.

To stop the print job immediately, remove the remaining print media from the device. After printing stops, use one of the following options:

Device control panel: To cancel the print job, press and release Cancel on the control panel.

Software program: Typically, a dialog box appears briefly on the computer screen, allowing you to cancel the print job.

Windows print queue: If a print job is waiting in a print queue (computer memory) or print spooler, delete the job there.

Windows 2000: Go to the Printer dialog box. Click Start, click Settings, and then click Printers.

Double-click the device icon to open the window, select your print job, and then click Delete.

Windows XP: Click Start, and then click Printers and Faxes. Double-click the icon for the device to open the window, right-click the print job that you want to cancel, and then click Cancel.

Macintosh print queue: Open the print queue by double-clicking the device icon in the dock. Then highlight the print job and click Delete.

ENWW Canceling a print job 39

40 Chapter 5 Printing ENWW

6 Copy

Starting a copy job

Canceling a copy job

Adjusting the copy quality

Adjusting the lighter/darker (contrast) setting

Reducing or enlarging copies

Changing the number of copies

Copying onto media of different types and sizes

Copying two-sided documents

Copying photos and books

Viewing copy settings

ENWW 41

Starting a copy job

To make copies with the device, use the following instructions.

1.

Lift the scanner lid, and then load your document face-down (one page at a time) with the upper-left corner of the document located in the lower-right corner of the scanner glass.

2.

Press Start Copy on the device control panel to start copying.

3.

Repeat the process for each copy.

For more detailed instructions about loading documents to copy, see

Loading documents to copy or scan on page 24 .

Canceling a copy job

To cancel a copy job, press Cancel on the device control panel. If more than one process is running, pressing

Cancel clears the process that currently appears on the control-panel display.

NOTE:

If you cancel a copy job, remove the document from the flatbed scanner.

Adjusting the copy quality

Five copy-quality settings are available: Draft,Text, Mixed, Film photo, and Picture.

Text: This setting is the best for items that contain mostly text. This is the default setting.

Film photo: This setting is the best for photographs.

Picture: This setting is the best for graphics.

Mixed: This setting is the best for documents that include both text and graphics.

Draft: This setting is the best for conserving toner.

42 Chapter 6 Copy ENWW

To adjust the copy quality for the current job

1.

On the device control panel, press More Copy Settings twice to see the current quality setting for the copy.

2.

Use the < or the > button to scroll through the quality setting options.

3.

Select a setting, and then press Start Copy to save the selection and immediately start the copy job, or press Menu/Enter to save the selection without starting the job.

NOTE:

The change in the setting remains active for about two minutes after the copy job has been completed. During this time, Settings=Custom appears on the device control-panel display.

To adjust the default copy quality

1.

On the device control panel, press Menu/Enter .

2.

Use the < or the > button to select Copy setup, and then press Menu/Enter .

3.

Press Menu/Enter to select Default Quality.

4.

Use the < or the > button to scroll through the choices.

5.

Press Menu/Enter to save the selection.

ENWW Adjusting the copy quality 43

Adjusting the lighter/darker (contrast) setting

The lighter/darker setting affects the lightness or darkness (contrast) of the copy. Use the following procedure to change the contrast for the current copy job only.

To adjust the lighter/darker setting for the current job

1.

On the device control panel, press Lighter/Darker to see the current contrast setting.

2.

Use the < or the > button to adjust the setting. Move the slider to the left to make the copy lighter than the original, or move the slider to the right to make the copy darker than the original.

3.

Press Start Copy to save the selection and immediately start the copy job, or press Menu/Enter to save the selection without starting the job.

NOTE:

The change in the setting remains active for about two minutes after the copy job has been completed. During this time, Settings=Custom appears on the device control-panel display.

To adjust the default lighter/darker setting

NOTE:

The default lighter/darker setting affects all copy jobs.

1.

On the device control panel, press Menu/Enter .

2.

Use the < or the > button to select Copy setup, and then press Menu/Enter .

3.

Use the < or the > button to select Def. Light/dark, and then press Menu/Enter .

4.

Use the < or the > button to adjust the setting. Move the slider to the left to make all of the copies lighter than the original, or move the slider to the right to make all of the copies darker than the original.

5.

Press Menu/Enter to save the selection.

44 Chapter 6 Copy ENWW

Reducing or enlarging copies

The device can reduce copies to as little as 25% of the original size or enlarge copies to as much as 400% of the original size.

Reduction/enlargement settings

Original=100%

A4 > Ltr=94%

Ltr > A4=97%

Full page=91%

2 pages/sheet

4 pages/sheet

Custom: 25-400%

NOTE:

For information about using the 2 pages/sheet or 4 pages/sheet setting, see

Copying multiple pages on one sheet of paper on page 46

.

Adjusting the copy size

To reduce or enlarge copies for the current job

1.

On the device control panel, press More Copy Settings .

2.

Use the < or the > button to select Reduce/Enlarge, and then press Menu/Enter .

3.

Use the < or the > button to select the size to which you would like to reduce or enlarge the copies in this job.

NOTE:

If you select Custom: 25-400%, use the < or the > button to adjust the percentage.

4.

Press Start Copy to save the selection and immediately start the copy job, or press Menu/Enter to save the selection without starting the job.

NOTE:

The change in the setting remains active for about two minutes after the copy job has been completed. During this time, Settings=Custom appears on the device control-panel display.

You must change the default media size in the media input tray to match the output size, or part of your copy might be cut off.

To adjust the default copy size

NOTE:

The default copy size is the size to which copies are normally reduced or enlarged. If you keep the factory default size setting of Original=100%, all copies will be the same size as the original document.

1.

On the device control panel, press Menu/Enter .

2.

Use the < or the > button to select Copy setup, and then press Menu/Enter .

3.

Use the < or the > button to select Def. Reduce/Enlrg, and then press Menu/Enter .

4.

Use the < or the > button to select the option for how you normally want to reduce or enlarge copies.

ENWW Reducing or enlarging copies 45

NOTE:

If you select Custom: 25-400%, type in the percentage of the original size that you normally want for copies.

If you select 2 pages/sheet or 4 pages/sheet, select the orientation (portrait or landscape).

5.

Press Menu/Enter to save the selection.

Copying multiple pages on one sheet of paper

1.

On the device control panel, press More Copy Settings .

2.

Use the < or the > button to select Reduce/Enlarge, and then press Menu/Enter .

3.

Use the < or the > button to select 2 pages/sheet or 4 pages/sheet, and then press Menu/Enter .

4.

Use the < or the > button to select Portrait or Landscape, and then press Start Copy .

5.

Wait for the scanner to stop scanning. The Next Page [OK] to Continue message appears.

6.

Remove the original from the flatbed scanner, put the next original onto the scanner, and then close the lid.

7.

Press OK .

If you selected 2 pages/sheet, the device prints the copy with two original pages on one page.

If you selected 4 pages/sheet, repeat steps 6 and 7 two more times. The device prints the copy with four original pages on one page

NOTE:

The change in the setting remains active for about two minutes after the copy job has been completed. During this time, Settings=Custom appears on the device control-panel display.

You must change the default media size in the media input tray to match the output size, or part of your copy might be cut off.

46 Chapter 6 Copy ENWW

Changing the number of copies

You can choose to have the default number of copies be any number from 1 to 99.

To change the number of copies for the current job

1.

On the device control panel, press # Copies .

2.

Use the < or the > button to adjust the number of copies, and then press Menu/Enter .

3.

Press Start Copy .

NOTE:

The change in the setting remains active for about two minutes after the copy job has been completed. During this time, Settings=Custom appears on the device control-panel display.

To change the default number of copies

1.

On the device control panel, press Menu/Enter .

2.

Use the < or the > button to select Copy setup, and then press Menu/Enter .

3.

Use the < or the > button to select Def. # of copies, and then press Menu/Enter .

4.

Use the < or the > button to adjust the number of copies (between 1 and 99) that you want as the default.

5.

Press Menu/Enter to save the selection.

NOTE:

The factory-set default for the number of copies is 1.

ENWW Changing the number of copies 47

Copying onto media of different types and sizes

The device is set to copy on either letter- or A4-size paper, depending on the country/region in which it was purchased. You can change the size and type of media that you copy to for the current copy job or for all copy jobs.

Media-size settings

Letter

Legal

A4

Media-type settings

Plain

Preprinted

Letterhead

Transparency

Prepunched

Labels

Bond

Recycled

Color

Light

Heavy

Cardstock

Envelope

Rough Paper

To change the default media-size setting

1.

On the device control panel, press Menu .

2.

Use the < or the > button to select System setup, and then press Menu/Enter .

3.

Use the < or the > button to select Paper setup, and then press Menu/Enter .

4.

Use the < or the > button to select Def. paper size, and then press Menu/Enter .

5.

Use the < or the > button to select a media size, and then press Menu/Enter .

6.

Press Menu/Enter to save the selection.

48 Chapter 6 Copy ENWW

To change the default media-type setting type

1.

On the device control panel, press Menu .

2.

Use the < or the > button to select System setup, and then press Menu/Enter .

3.

Use the < or the > button to select Paper setup, and then press Menu/Enter .

4.

Use the < or the > button to select Def. paper type, and then press Menu/Enter .

5.

Use the < or the > button to select a media type, and then press Menu/Enter .

6.

Press Menu/Enter to save the selection.

ENWW Copying onto media of different types and sizes 49

Copying two-sided documents

Copying a two-sided original to a one-sided document

Copies resulting from these procedures are printed on one side, and need to be hand-collated.

1.

Load the first page of the document to be copied face-down onto the flatbed scanner, and then close the scanner lid.

2.

Press Start Copy .

3.

Flip the page on the scanner to the second side, and then close the scanner lid.

4.

Press Start Copy .

5.

Repeat steps 1 through 4 for each page until all of the original document pages have been copied.

Copying a two-sided original to a two-sided document

1.

Load the first page of the document to be copied face-down onto the flatbed scanner, and then close the scanner lid.

2.

Press Start Copy .

3.

Flip the page on the scanner to the second side, and then close the scanner lid.

4.

Remove the copied page from the output bin and place it face down into the priority input tray with the top edge feeding into the device first.

5.

Press Start Copy .

50 Chapter 6 Copy ENWW

6.

Remove the copied page from the output bin, and then set it aside for manual collating.

7.

Repeat steps 1 through 6, following the original document page order, until all pages of the original are copied.

ENWW Copying two-sided documents 51

Copying photos and books

To copy a photo

1.

Lift the lid and place the photo on the flatbed scanner with the picture-side down and the upper-left corner of the photo in the lower-right corner of the glass.

2.

Gently close the lid.

3.

Adjust the copy quality setting to Film photo. See

Adjusting the copy quality on page 42 .

4.

Press Start Copy .

To copy a book

1.

Lift the lid and place the book on the flatbed scanner with the page that you want to copy at the lowerright corner of the glass.

52 Chapter 6 Copy ENWW

2.

Gently close the lid.

3.

Gently press down on the lid to press the book to the flatbed scanner surface.

4.

Press Start Copy .

Viewing copy settings

Use the More Copy Settings button to see the copy settings for the current copy job.

1.

Press More Copy Settings to see the current setting for copy contrast.

2.

Continue to press More Copy Settings to scroll through the copy settings for the current copy job.

Settings should appear in the following order: copy contrast, copy quality, media size, media type, reduction/enlargement, and number of copies.

Use the < or the > button to change the settings, and then press Menu/Enter .

ENWW Viewing copy settings 53

54 Chapter 6 Copy ENWW

7 Scan

Understanding scanning methods

Scanning by using HP LaserJet Scan (Windows)

Canceling a scan job

Scanning by using other software

Scanning a photo or a book

Scanning by using optical character recognition (OCR) software

Scanner resolution and color

For information about a cleaning the flatbed scanner, see

To clean the scanner glass on page 67 .

ENWW 55

Understanding scanning methods

You can scan an item in the following ways.

Scan from the computer by using HP LaserJet Scan (Windows): In the device program group, select

Scan To to start HP LaserJet Scan. See Scanning by using HP LaserJet Scan (Windows) on page 57

.

Scan from TWAIN-compliant software: The device is TWAIN-compliant and works with Windows-based and Macintosh-based programs that support TWAIN-compliant scanning. For more information, see

Scanning by using other software on page 58

.

Scan from Windows Imaging Application (WIA)-compliant software: The device is WIA-compliant and works with Windows-based programs that support WIA-compliant scanning. For more information, see

Scanning by using other software on page 58

.

NOTE:

To learn about and use text-recognition software, install the Readiris program from the software

CD-ROM. Text-recognition software is also known as optical character recognition (OCR) software.

56 Chapter 7 Scan ENWW

Scanning by using HP LaserJet Scan (Windows)

For more information about tasks and settings described in this section, see the HP LaserJet Scan online

Help.

For more detailed instructions about loading original documents onto the flatbed scanner, see

Loading documents to copy or scan on page 24 .

1.

Click Start, click All Programs, click HP, and then click HP LaserJet M1005 MFP.

2.

Select Scan To to start HP LaserJet Scan.

3.

Select a scanning destination.

4.

Click Scan.

Canceling a scan job

To cancel a scan job, use one of the following procedures.

On the device control panel, press Cancel .

Click the Cancel button in the onscreen dialog box.

If you cancel a scan job, remove the original from the flatbed scanner.

NOTE:

These procedures vary with Macintosh operating systems.

ENWW Scanning by using HP LaserJet Scan (Windows) 57

Scanning by using other software

The device is TWAIN-compliant and Windows Imaging Application (WIA)-compliant. The device works with

Windows-based programs that support TWAIN-compliant or WIA-compliant scanning devices and with

Macintosh-based programs that support TWAIN-compliant scanning devices.

Using TWAIN-compliant and WIA-compliant software

From a TWAIN-enabled or WIA-enabled program, you can open the scanning feature and scan an image directly into the open program. For more information, see the Help file or the documentation that came with your TWAIN-compliant or WIA-compliant software program.

Scanning from a TWAIN-enabled program

Generally, a software program is TWAIN-enabled if it has a command such as Acquire, File Acquire, Scan,

Import New Object, Insert from, or Scanner. If you are unsure whether the program is compliant or you do not know what the command is called, see the software program Help or documentation.

When scanning from a TWAIN-enabled program, the HP LaserJet Scan software program might start automatically. If the HP LaserJet Scan program starts, you can make changes while you are previewing the image. If the program does not start automatically, the image goes to the TWAIN-enabled program immediately.

To scan from a TWAIN-enabled program

Start the scan from within the TWAIN-enabled program. See the software program Help or documentation for information about the commands and steps to use.

Scanning from a WIA-enabled program (Windows XP or Windows Server 2003)

WIA is another way to scan an image directly into a software program, such as Microsoft Word. WIA uses

Microsoft software to scan, instead of the HP LaserJet Scan software.

Generally, a software program is WIA-enabled if it has a command such as Picture/From Scanner or Camera in the Insert or File menu. If you are unsure whether the program is WIA-enabled, see the software program

Help or documentation.

To scan from a WIA-enabled program

Start the scan from within the WIA-enabled program. See the software program Help or documentation for information about the commands and steps to use.

-Or-

In the Cameras and Scanner folder, double-click the device icon. This opens the standard Microsoft WIA

Wizard, which enables you to scan to a file.

58 Chapter 7 Scan ENWW

Scanning a photo or a book

Use the following procedures to scan a photo or a book.

To scan a photo

1.

Place the photo on the flatbed scanner with the picture-side down and the upper-left corner of the photo in the lower-right corner of the glass.

2.

Gently close the lid.

3.

You are now ready to scan the photo by using one of the scanning methods. See

Understanding scanning methods on page 56 for more information.

To scan a book

1.

Lift the lid and place the book on the flatbed scanner with the page that you want to copy at the lowerright corner of the glass.

ENWW Scanning a photo or a book 59

2.

Gently close the lid.

3.

Gently press down on the lid to press the book to the flatbed scanner surface.

4.

You are now ready to scan the book by using one of the scanning methods. See

Understanding scanning methods on page 56 for more information.

Scanning by using optical character recognition (OCR) software

You can use third-party OCR software to import scanned text into your preferred word-processing program for editing.

Readiris

The device software CD-ROMs include the Readiris OCR program. If you want to use the Readiris program, install it from the appropriate software CD-ROM, and then follow the instructions in the online Help.

60 Chapter 7 Scan ENWW

Scanner resolution and color

If you are printing a scanned image, and the quality is not what you expected, you might have selected a resolution or color setting in the scanner software that does not match your needs. Resolution and color affect the following features of scanned images:

Image clarity

Texture of gradations (smooth or rough)

Scan time

File size

Scanning resolution is measured in pixels per inch (ppi).

NOTE:

Scanning ppi levels are not interchangeable with printing dpi (dots per inch) levels.

Color, grayscale, and black and white define the number of colors possible. You can adjust the scanner hardware resolution to up to 1200 ppi. The software can perform an enhanced resolution up to 19,200 ppi.

You can set color and grayscale at 1 bit (black and white), or at 8 bit (256 levels of gray or color) to 24 bit

(true color).

The resolution and color guidelines table lists simple tips that you can follow to meet your scanning needs.

NOTE:

Setting the resolution and color to a high value can create large files that take up a large amount of disk space and slow the scanning process. Before setting the resolution and color, determine how you are going to use the scanned image.

ENWW Scanner resolution and color 61

Resolution and color guidelines

The following tables describe the recommended resolution and color settings for different types of scan jobs.

Resolution

Intended use

E-mail

Edit text

Print (graphics or text)

Display on screen

Recommended resolution

150 ppi

Recommended color settings

Black and White, if the image does not require smooth gradation

Grayscale, if the image requires smooth gradation

300 ppi

600 ppi for complex graphics, or if you want to significantly enlarge the document

Color, if the image is in color

Black and White

Black and White for text and line art

300 ppi for normal graphics and text

150 ppi for photos

75 ppi

Grayscale for shaded or colored graphics and photos

Color, if the image is in color

Black and White for text

● Grayscale for graphics and photos

Color, if the image is in color

Color

Setting

Color

Black and White

Grayscale

Recommended use

Use this setting for high-quality color photos or documents in which the color is important.

Use this setting for text documents.

Use this setting when file size is an issue or when you want a document or photograph to be scanned quickly.

62 Chapter 7 Scan ENWW

8 Managing and maintaining the device

Information pages

Managing supplies

Cleaning the device

Changing the print cartridge

ENWW 63

Information pages

Information pages reside within the device memory. These pages help to diagnose and solve problems with the device.

Page name

Demo page

Description

The Demo page prints a sample page that allows you to inspect the device print quality.

Instructions

1.

On the device control panel, press Menu/Enter .

2.

Use the < or the > button to select Reports, and then press Menu/Enter .

Menu structure The Menu structure is a “map” of the controlpanel menu commands.

3.

Press Menu/Enter to select Demo page.

1.

On the device control panel, press Menu/Enter .

2.

Use the < or the > button to select Reports, and then press Menu/Enter .

3.

Use the < or the > button to select Menu structure, and then press Menu/Enter .

1.

On the device control panel, press Menu/Enter .

Configuration report The Configuration report lists the current settings and properties of the device.

2.

Use the < or the > button to select Reports, and then press Menu/Enter .

1.

Product Information. This section contains basic information about the device, such as the product name, the serial number, and memory information.

3.

Use the < or the and then press

> button to select Config report,

Menu/Enter .

2.

Product Settings. This section lists information that is gathered during software installation.

3.

Paper Settings. This section lists information about the media type for each tray and about the type settings for all the media that the device supports.

4.

Copy Settings. This section lists the device default copy settings.

5.

Counters. This section shows the number of print, copy, and scan jobs performed by the device.

6.

Status Log. This section contains information about device errors.

64 Chapter 8 Managing and maintaining the device ENWW

Managing supplies

Checking supplies status

If the supplies levels are low, you can order supplies through your local HP dealer, by telephone, or online.

See

Accessories and ordering information on page 101

for part numbers. See www.hp.com/go/ljsupplies to order online.

Storing supplies

Follow these guidelines for storing print cartridges:

Do not remove the print cartridge from its package until you are ready to use it.

CAUTION:

To prevent damage, do not expose the print cartridge to light for more than a few minutes.

See

Environmental specifications on page 128 for operating and storage temperature ranges.

Store the supply in a horizontal position.

Store the supply in a dark, dry location away from heat and magnetic sources.

Replacing and recycling supplies

To install a new HP print cartridge, follow the instructions that are included in the box that contains the new supply, or see the getting started guide.

To recycle supplies, place the used supply in the box in which the new supply arrived. Use the enclosed return label to send the used supply to HP for recycling. For complete information, see the recycling guide that is included with each new HP supply item.

Redistribute toner

If faded or light areas appear on the printed page, you might be able to temporarily improve print quality by redistributing the toner.

1.

Remove the print cartridge from the printer.

2.

To redistribute the toner, gently rock the print cartridge from front to back.

CAUTION:

If toner gets on your clothing, wipe it off with a dry cloth and wash the clothing in cold water. Hot water sets toner into the fabric.

3.

Reinsert the print cartridge into the printer, and close the print cartridge door. If the print is still light or unacceptable, install a new print cartridge.

HP policy on non-HP supplies

HP Company cannot recommend the use of non-HP supplies, either new or remanufactured. Because they are not HP products, HP cannot influence their design or control their quality. Service or repairs required as a result of using a non-HP supply will not be covered under the warranty.

ENWW Managing supplies 65

HP fraud hotline

Call the HP fraud hotline if the device indicates that the print cartridge is not an HP print cartridge and you think that it is genuine. HP will help determine if the product is genuine and take steps to resolve the problem.

Your print cartridge might not be a genuine HP one if you notice the following issues:

You are experiencing a large number of problems with the print cartridge.

The print cartridge does not look like it usually does (for example, the pull tab or the box is different).

In the United States, call toll-free: 1-877-219-3183.

Outside the United States, you can call collect. Dial the operator and ask to place a collect call to this telephone number: 1-770-263-4745. If you do not speak English, a representative at the HP fraud hotline who speaks your language will assist you. Or, if someone who speaks your language is not available, a language line interpreter will connect approximately one minute after the beginning of the call. The language line interpreter is a service that will translate between you and the representative for the HP fraud hotline.

66 Chapter 8 Managing and maintaining the device ENWW

Cleaning the device

To clean the exterior

Use a soft, damp, lint-free cloth to wipe dust, smudges, and stains off of the exterior of the device.

To clean the scanner glass

Dirty glass, from fingerprints, smudges, hair, and so on, slows down performance and affects the accuracy of special features such as fit-to-page and copy.

1.

Turn off the device, unplug the power cord from the electrical socket, and raise the lid.

2.

Clean the glass by using a soft cloth or sponge that has been moistened with nonabrasive glass cleaner.

CAUTION:

Do not use abrasives, acetone, benzene, ammonia, ethyl alcohol, or carbon tetrachloride on any part of the device; these can damage the device. Do not place liquids directly on the glass. They might seep under it and damage the device.

3.

To prevent spotting, dry the glass by using a chamois or cellulose sponge.

To clean the lid backing

Minor debris can accumulate on the white document lid backing that is located underneath the scanner lid.

1.

Turn off the device, unplug the power cord from the electrical socket, and raise the lid.

2.

Clean the white document lid backing by using a soft cloth or sponge that has been moistened with a mild soap and warm water.

ENWW

3.

Wash the backing gently to loosen debris; do not scrub the backing.

Cleaning the device 67

4.

Dry the backing by using a chamois or soft cloth.

CAUTION:

Do not use paper-based wipes because they might scratch the backing.

5.

If this does not clean the backing well enough, repeat the previous steps and use isopropyl alcohol to dampen the cloth or sponge, and then wipe the backing thoroughly with a damp cloth to remove any residual alcohol.

To clean the paper path

The device features a special cleaning mode to clean the paper path.

1.

On the device control panel, press Menu/Enter .

2.

Use the < or the > button to select Service, and then press Menu/Enter .

3.

Use the < or the > button to select Cleaning Mode, and then press Menu/Enter .

A page feeds through the device slowly. Discard the page when the process is completed.

4.

Load plain letter or A4 paper when you are prompted.

5.

Press Menu/Enter again to confirm and begin the cleaning process.

A page feeds through the device slowly. Discard the page when the process is completed.

68 Chapter 8 Managing and maintaining the device ENWW

Changing the print cartridge

1.

Open the print-cartridge door.

2.

Grasp the handle on the print cartridge and then pull the cartridge straight out to remove it. See the recycling information inside the print cartridge box.

3.

Remove the new print cartridge from its packaging, remove the cover from the print cartridge, and then pull the tab straight out to remove the sealing tape.

ENWW Changing the print cartridge 69

4.

Insert the cartridge into the device until it is firmly in place.

5.

Close the print-cartridge door.

CAUTION:

If toner gets on your clothing, wipe it off with a dry cloth and wash the clothing in cold water. Hot

water sets toner into the fabric.

70 Chapter 8 Managing and maintaining the device ENWW

9 Problem solving

Problem-solving checklist

Clearing jams

Control-panel messages

Print problems

Copy problems

Scan problems

Control-panel display problems

Solving common Macintosh problems

Problem-solving tools

ENWW 71

Problem-solving checklist

Follow these steps when trying to solve a problem with the device.

Step number Verification step

1

2

3

4

5

Is the power on?

When the device is connected to a grounded power source and is turned on, the control panel shows Initializing..., and the main motor rotates for approximately 10 seconds.

Does Ready appear in the

device control panel?

The control panel should function without error messages.

Do information pages print?

Print a Configuration report. See

Information pages on page 64 .

Does the device copy?

Place the Configuration report on the flatbed scanner and make a copy.

Does the device print from the computer?

Connect the USB cable to the device and the computer. Use a word-processing program to send a print job to the device.

Possible problems

No power due to failed power source, cable, switch, or fuse.

Solutions

1.

Verify that the device is plugged in.

2.

Verify that the power cable is functional and that the power switch is on.

Motor does not rotate.

Control panel shows an error.

An error message appears on the control-panel display.

Media does not move smoothly through the device paper path.

Poor print quality.

3.

Check the power source by plugging the device directly into the wall or into a different outlet.

1.

Verify that the print cartridge is installed

correctly. See Changing the print cartridge on page 69 .

2.

Verify that the top cover is closed.

See Control-panel messages on page 80

for a list of common messages that will help you correct the error.

If the error persists, contact HP Customer

Care. See the support flyer that came in the device box.

See Control-panel messages on page 80

for a list of common messages that will help you correct the error.

Make sure that media that meets

HP specifications. See

Media specifications on page 13

Clean the paper path. See To clean the paper path on page 68 .

See

Print quality problems on page 83 .

Poor copy quality from the flatbed.

If the error persists, contact HP Customer

Care. See the support flyer that came in the device box.

1.

Clean the flatbed glass. See To clean the scanner glass on page 67 .

2.

If, after performing the maintenance, the problem persists, see

Copy problems on page 91

.

If the error persists, contact HP Customer Care. See the support flyer that came in the device box.

Software is not installed correctly or an error occurred during software installation.

Uninstall and then reinstall the device software. Verify that you are using the correct installation procedure and the correct port setting.

The cable is not connected correctly.

An incorrect driver is selected.

Reconnect the cable.

Select the proper driver.

72 Chapter 9 Problem solving ENWW

Step number Verification step

6 Does the device scan to the computer?

Initiate a scan from the basic desktop software at your computer.

Possible problems Solutions

Other devices are connected to the USB port.

Disconnect the other devices and try again to print.

There is a port driver problem in Microsoft

Windows.

Uninstall and then reinstall the device software. Verify that you are using the correct installation procedure and the correct port setting.

If the error persists, contact HP Customer Care. See the support flyer that came in the device box.

The cable is not connected correctly.

Software is not installed correctly or an error occurred during software installation.

Reconnect the cable.

Uninstall and then reinstall the device software. Verify that you are using the correct installation procedure and the correct port setting.

If the error persists, turn off the device and then turn on the device.

If the error still persists, contact HP Customer Care. See the support flyer that came in the device box.

ENWW Problem-solving checklist 73

Clearing jams

This section contains instructions for clearing jams from the device.

Causes of jams

Occasionally, paper or other print media can become jammed during a print job. Some causes include the following events:

The input trays are loaded improperly or overfilled, or the media guides are not set properly.

Media is added to or removed from an input tray during a print job or an input tray is removed from the device during a print job.

The cartridge door is opened during a print job.

Too many sheets have accumulated in the output area, or sheets are blocking the output area.

The print media that is being used does not meet HP specifications. See

Media specifications on page 13 .

The media is damaged or has foreign objects attached to it, such as staples or paper clips.

The environment in which the print media was stored is too humid or too dry. See Printing and storage environment on page 22 .

Tips to avoid jams

Verify that the input tray is not overfilled. The input tray capacity varies depending on the type of print media that you are using.

Verify that the media guides are properly adjusted.

Check that the input tray is securely in place.

Do not add print media into the input tray while the device is printing.

Use only HP-recommended media types and sizes. See Media specifications on page 13

for more information about print media types.

Do not let print media stack up in the output bin. The print media type and the amount of toner used affect the output bin capacity.

Check the power connection. Make sure that the power cord is firmly connected to both the device and the power supply box. Plug the power cord into a grounded power outlet.

74 Chapter 9 Problem solving ENWW

Where to look for jams

Jams can occur in these locations:

Input trays

Output area

Print-cartridge area

Find and remove the jam by using the instructions on the following pages. If the location of the jam is not obvious, first look inside the device.

Loose toner might remain in the device after a jam. This problem typically resolves itself after a few sheets have been printed.

ENWW Clearing jams 75

Input trays

CAUTION:

Do not use sharp objects, such as tweezers or needle-nose pliers, to remove jams. Damage caused by sharp objects will not be covered by the warranty.

When removing jammed media, pull the jammed media straight away from the device. Pulling jammed media out of the device at an angle can damage the device.

1.

Pull any visible jammed media out of the priority input tray.

2.

Open tray 1 and pull any visible jammed media out of the device.

3.

If no media is visible, open the print-cartridge door, remove the print cartridge, and then carefully pull the media up and out of the device.

76 Chapter 9 Problem solving ENWW

4.

Replace the print cartridge and close the print-cartridge door.

5.

Close tray 1.

ENWW Clearing jams 77

Output bin

CAUTION:

Do not use sharp objects, such as tweezers or needle-nose pliers, to remove jams. Damage caused by sharp objects will not be covered by the warranty.

With both hands, grasp the side of the media that is most visible (this includes the middle), and carefully pull it free from the device.

Print-cartridge area

CAUTION:

Do not use sharp objects, such as tweezers or needle-nose pliers, to remove jams. Damage caused by sharp objects will not be covered by the warranty.

When removing jammed media, pull the jammed media straight away from the device. Pulling jammed media out of the device at an angle can damage the device.

1.

Open the print-cartridge door, and remove the print cartridge.

CAUTION:

To prevent damage to the print cartridge, minimize its exposure to direct light.

78 Chapter 9 Problem solving ENWW

2.

With both hands, grasp the side of the media that is most visible (this includes the middle), and carefully pull it free from the device.

3.

Replace the print cartridge and close the print-cartridge door.

ENWW Clearing jams 79

Control-panel messages

The majority of the control-panel messages are intended to guide the user through typical operation. The control-panel messages indicate the status of the current operation, and include a page count on the second line of the display, if appropriate. When the device is receiving print data or scanning commands, controlpanel messages indicate this status. In addition, alert messages, warning messages, and critical error messages indicate situations that might require some action.

Alert and warning messages

Alert and warning messages appear temporarily and might require the user to acknowledge the message by pressing Menu/Enter to resume or by pressing Cancel to cancel the job. With certain warnings, the job might not complete or the print quality might be affected. If the alert or warning message is related to printing and the auto-continue feature is on, the device will attempt to resume the printing job after the warning has appeared for 10 seconds without acknowledgement.

Alert and warning message tables

Control panel message

Device error Press [OK]

Jam in print paper path

alternates with

Open door and clear jam

Page too complex Press [OK]

Description

The device experienced an internal communication error.

The device has detected a jam in the paper path.

The device could not print the current page because of its complexity.

Recommended action

This is a warning message only. Job output might be affected.

Clear the jam from the area indicated on the device control panel, and then follow the

control panel instructions. See Clearing jams on page 74

.

Printer jam clear paper path

Settings cleared

The device has detected a jam in the input trays.

The device has cleared job settings.

Press Menu/Enter to clear the message.

Allow the device to finish the job, or press

Cancel to cancel the job.

Clear the jam from the area indicated on the device control panel, and then follow the

control panel instructions. See Clearing jams on page 74

.

Re-enter any appropriate job settings.

80 Chapter 9 Problem solving ENWW

Critical error messages

Critical error messages can indicate some kind of failure. Restarting the device might fix the problem. If a critical error persists, the device might require service.

Critical error message tables

Control panel message

50.1 Fuser Error Turn off then on

50.2 Fuser Error Turn off then on

50.3 Fuser Error Turn off then on

50.8 Fuser Error Turn off then on

Description

The device has experienced an internal hardware error.

The device has experienced an internal hardware error.

The device has experienced an internal hardware error.

The device has experienced an internal hardware error.

Recommended action

1.

Turn off the power by using the power switch, and then wait at least 30 seconds.

2.

If a surge protector is being used, remove it. Plug the device directly into the wall socket.

3.

Turn on the power and wait for the device to initialize.

If the error persists, contact HP Customer Care.

See the support flyer that came in the device box.

Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.

If a surge protector is being used, remove it.

Plug the device directly into the wall socket.

Use the power switch to turn the device on.

If the error persists, contact HP Customer Care.

See the support flyer that came in the device box.

Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.

If a surge protector is being used, remove it.

Plug the device directly into the wall socket.

Use the power switch to turn the device on.

If the error persists, contact HP Customer Care.

See the support flyer that came in the device box.

Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.

If a surge protector is being used, remove it.

Plug the device directly into the wall socket.

Use the power switch to turn the device on.

If the error persists, contact HP Customer Care.

See the support flyer that came in the device box.

ENWW Control-panel messages 81

Control panel message

50.9 Fuser Error Turn off then on

52 Scanner Error Turn off then on

54.1C Error Turn off then on

Engine comm. Error

Description

The device has experienced an internal hardware error.

The device has experienced a scanner error.

The device has experienced an internal hardware error.

The device has experienced an internal hardware error.

Recommended action

Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.

If a surge protector is being used, remove it.

Plug the device directly into the wall socket.

Use the power switch to turn the device on.

If the error persists, contact HP Customer Care.

See the support flyer that came in the device box.

Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.

If a surge protector is being used, remove it.

Plug the device directly into the wall socket.

Use the power switch to turn the device on.

If the error persists, contact HP Customer Care.

See the support flyer that came in the device box.

Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.

If a surge protector is being used, remove it.

Plug the device directly into the wall socket.

Use the power switch to turn the device on.

If the error persists, contact HP Customer Care.

See the support flyer that came in the device box.

1.

Turn off the power by using the power switch, and then wait at least 30 seconds.

2.

If a surge protector is being used, remove it. Plug the device directly into the wall socket.

3.

Turn on the power and wait for the device to initialize.

If the error persists, contact HP Customer Care.

See the support flyer that came in the device box.

82 Chapter 9 Problem solving ENWW

Print problems

Print quality problems

Occasionally, you might encounter problems with print quality. The information in the following sections helps you identify and resolve these issues.

NOTE:

If you are having copy problems, see Copy problems on page 91 .

Improving print quality

Use the print-quality settings to prevent print-quality problems.

Understanding print-quality settings

Print-quality settings affect how light or dark the print is on the page and the style in which the graphics are printed. You can also use the print-quality settings to optimize the print quality for a specific media type.

You can change the settings in the device properties to accommodate the types of jobs that you are printing.

The following settings are available, depending on the printer driver that you are using:

600 dpi

FastRes 1200: This setting produces the same resolution as the default setting, but you can change the scale patterns.

NOTE:

Changing the resolution can change the formatting of your text.

To temporarily change print-quality settings

To change the print-quality settings only for the current software program, open the properties through the

Print Setup menu in the program that you are using to print.

To change print-quality settings for all future jobs

NOTE:

For Macintosh instructions, see

Changing printer-driver settings on page 9

for more information.

For Windows 2000:

1.

In the Windows system tray, click Start, select Settings, and then click Printers.

2.

Right-click the device icon.

3.

Click Properties (in Windows 2000, you can also click Printing Preferences).

4.

Change the settings, and click OK.

For Windows XP:

1.

In the Windows system tray, click Start, and then click Printers and Faxes.

2.

Right-click the device icon.

3.

Click Properties, or click Printing Preferences.

4.

Change the settings, and click OK.

ENWW Print problems 83

Identifying and correcting print defects

Use the checklist and print-quality issues charts in this section to solve print-quality problems.

Print-quality checklist

General print-quality problems can be solved by using the following checklist:

1.

Make sure that the paper or print media that you are using meets HP specifications. See Media specifications on page 13 . Generally, smoother paper provides better results.

2.

If you are using a special print media such as labels, transparencies, glossy, or letterhead, ensure that

you have printed by type. See Controlling print jobs on page 26 .

3.

Print a Configuration report at the device control panel. See Information pages on page 64 .

If the page did not print correctly, the problem is with the hardware. Contact HP Customer Care.

See the flyer that came in the device box.

4.

Print a Demo page from the device control panel. If the page prints, the problem is with the printer driver.

Use the Add Printer Wizard in the Printers (or Printers and Faxes in Windows XP) dialog box to install the correct driver.

5.

Try printing from a different program. If the page prints correctly, the problem is with the program from which you were printing.

6.

Restart the computer and the device and try printing again. If the problem is not resolved, see

General print-quality issues on page 84 .

General print-quality issues

The following examples depict letter-size paper that has passed through the device short-edge-first. These examples illustrate problems that would affect all of the pages that you print. The topics that follow list the typical cause and solution for each of these examples.

Problem

Print is light or faded.

Cause

The media might not meet

HP specifications.

The print cartridge might be low.

If the whole page is light, the print density adjustment is too light or EconoMode might be turned on.

Solution

Use media that meets HP specifications.

See Media specifications on page 13 .

Replace the print cartridge. See

Changing the print cartridge on page 69 .

If the print cartridge is not low or empty, inspect the toner roller to see if the roller is damaged. If it is, replace the print cartridge.

Adjust the print density, and disable

EconoMode in the device Properties.

84 Chapter 9 Problem solving ENWW

Problem

Toner specks appear.

Cause

The media might not meet

HP specifications.

The paper path might need cleaning.

Solution

Use media that meets HP specifications.

See Media specifications on page 13

.

Clean the paper path. See To clean the paper path on page 68 .

Dropouts appear.

Vertical streaks or bands appear on the page.

A single sheet of print media might be defective.

The moisture content of the paper is uneven or the paper has moist spots on its surface.

The paper lot is flawed. The manufacturing processes can cause some areas to reject toner.

The print cartridge might be defective.

The print cartridge might be low or defective.

Try reprinting the job.

Try different paper, such as high-quality paper that is intended for laser printers.

See

See

Media specifications on page 13

Try different paper, such as high-quality paper that is intended for laser printers.

Media specifications on page 13

Replace the print cartridge. See

the print cartridge on page 69 .

.

.

Changing

If the error persists, contact HP Customer

Care. See the support flyer that came in the device box.

Replace the print cartridge. See

Changing the print cartridge on page 69 .

ENWW

The amount of background toner shading becomes unacceptable.

The media might not meet

HP specifications.

The priority input tray might be installed incorrectly.

Very dry (low humidity) conditions can increase the amount of background shading.

The print cartridge might be low.

Use a different paper with a lighter basis weight. See

Media specifications on page 13

.

Make sure that the priority input tray is in place.

Check the device environment.

Replace the print cartridge. See

Changing the print cartridge on page 69 .

Print problems 85

Problem

Toner smears appear on the media.

Cause

The media might not meet

HP specifications.

If toner smears appear on the leading edge of the paper, the media guides are dirty, or debris has accumulated in the print path.

The print cartridge might be low.

The fuser temperature might be too low.

Solution

Use media that meets HP specifications.

See Media specifications on page 13 .

Clean the media guides and the paper

path. See To clean the paper path on page 68 .

Replace the print cartridge. See

Changing the print cartridge on page 69 .

In the printer driver, make sure the appropriate media type is selected.

The toner smears easily when touched.

Marks repeatedly appear at even intervals on the page.

The printed page contains misformed characters.

The device is not set to print on the type of media on which you want to print.

The media might not meet

HP specifications.

The paper path might need cleaning.

The power source might be defective.

The print cartridge might be low.

The device is not set to print on the type of media on which you want to print.

Internal parts might have toner on them.

The paper path might need cleaning.

The print cartridge might be damaged.

The media might not meet

HP specifications.

If characters are incorrectly formed so that they produce a wavy effect, the laser scanner might need service.

In the printer driver, select the Paper tab and set Type is to match the type of media on which you are printing. Print speed might be slower if you are using heavy paper.

Use media that meets HP specifications.

See Media specifications on page 13 .

Clean the device. See

Cleaning the device on page 67 .

Plug the device directly into an AC outlet instead of into a power strip.

Replace the print cartridge. See

Changing the print cartridge on page 69 .

In the printer driver, make sure that the appropriate media type is selected. Print speed might be slower if you are using heavy paper.

The problem typically corrects itself after a few more pages.

Clean the device. See

Cleaning the device on page 67 .

If a repetitive mark occurs at the same spot on the page, install a new HP print cartridge. See

Changing the print cartridge on page 69 .

Use a different paper, such as high-quality paper that is intended for laser printers.

See Media specifications on page 13 .

Verify that the problem also occurs on the

Configuration report. If so, contact

HP Customer Care. See the support flyer that came in the device box.

86 Chapter 9 Problem solving ENWW

ENWW

Problem

The printed page is curled or wavy.

Cause

The device is not set to print on the type of media on which you want to print.

The media might have been in the input tray too long.

The paper path is curling the media.

The media might not meet

HP specifications.

Solution

In the printer driver, make sure the appropriate media type is selected.

If the problem persists, select a media type that uses a lower fuser temperature, such as transparencies or light media.

Turn over the stack of media in the tray.

Also, try rotating the media 180° in the input tray.

Use the Less paper curl setting. See

Reducing paper curl on page 100 .

Use a different paper, such as high-quality paper that is intended for laser printers.

See Media specifications on page 13

.

Check the device environment.

Text or graphics are skewed on the printed page.

Both high temperature and humidity can cause paper curl.

The media might be loaded incorrectly or the input tray might be too full.

The media might not meet

HP specifications.

Verify that the media is loaded correctly and that the media guides are not too tight

or too loose against the stack. See Loading media on page 24

.

Use a different paper, such as high-quality paper that is intended for laser printers.

See Media specifications on page 13

.

The printed page contains wrinkles or creases.

The media might be loaded incorrectly or the input tray might be too full.

The media might not meet

HP specifications.

The paper path is curling the media.

Air pockets inside envelopes can cause them to wrinkle.

Turn over the stack of paper in the input tray, or try rotating the paper 180° in the input tray.

Verify that the media is loaded correctly and that the media guides are not too tight

or too loose against the stack. See Loading media on page 24

.

Use a different paper, such as high-quality paper that is intended for laser printers.

See Media specifications on page 13

.

Use the Less paper curl setting. See

Reducing paper curl on page 100 .

Remove the envelope, flatten it, and try printing again.

Print problems 87

Problem

Toner appears around the printed characters.

Cause

The media might be loaded incorrectly.

If large amounts of toner have scattered around the characters, the paper might have high resistivity.

Solution

Turn over the stack of paper in the tray.

Use a different paper, such as high-quality paper that is intended for laser printers.

See Media specifications on page 13 .

An image that appears at the top of the page (in solid black) repeats farther down the page (in a gray field).

Software settings might affect image printing.

The order of images printed might affect printing.

A power surge might have affected the device.

In your software program, change the tone

(darkness) of the field in which the repeated image appears.

In your software program, rotate the whole page 180° to print the lighter image first.

Change the order in which the images are printed. For example, have the lighter image at the top of the page, and the darker image farther down the page.

If the defect occurs later in a print job, turn the device off for 10 minutes, and then turn on the device to restart the print job.

Media-handling problems

Use the information in this section when the device experiences media-handling problems.

Print-media guidelines

For best results, make sure that the paper is of good quality, and free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, voids, staples, and curled or bent edges.

For best-quality printing, use a smooth type of paper. Generally, smoother media produces better

results. For more information, see Media specifications on page 13

.

If you are unsure what type of paper you are loading (such as bond or recycled), check the label on the package of paper.

Do not use media that is designed for Inkjet printers only. Use media that is designed for LaserJet printers.

Do not use letterhead paper that is printed with low-temperature inks, such as those used in some types of thermography.

Do not use raised or embossed letterhead.

The device uses heat and pressure to fuse toner to the paper. Make sure that any colored paper or preprinted forms use inks that are compatible with this fusing temperature (200°C or 392°F for 0.1

second).

88 Chapter 9 Problem solving ENWW

CAUTION:

Failure to follow these guidelines could cause jams or damage to the device.

Solving print-media problems

The following problems with media cause print-quality deviations, jamming, or even damage to the device.

Problem Cause

Poor print quality or toner adhesion

Dropouts, jamming, or curl The paper has been stored incorrectly.

The paper has variability from one side to the other.

Excessive curl

The paper is too moist, too rough, too heavy or too smooth, or it is embossed or from a faulty paper lot.

The paper is too moist, has the wrong grain direction, or is of short-grain construction

The paper varies from side-to-side.

The paper has cutouts or perforations.

Jamming, damage to device

Problems with feeding

Print is skewed (crooked).

The paper has ragged edges.

The paper varies from side-to-side.

The paper is too moist, too rough, too heavy or too smooth, has the wrong grain direction, or is of short-grain construction or it is embossed or from a faulty paper lot.

The media guides might be incorrectly adjusted.

More than one sheet feeds at one time.

The device does not pull media from the media input tray.

The media tray might be overloaded.

The media might be wrinkled, folded, or damaged.

The device might be in manual feed mode.

The pickup roller might be dirty or damaged.

The paper-length adjustment control in tray 1 is set at a length that is greater than the media size.

Solution

Try another kind of paper, between 100 and 250 Sheffield, with 4 to 6% moisture content.

Store paper flat in its moisture-proof wrapping.

Turn the paper over.

Use long-grain paper, or use the Less paper curl setting. See

Reducing paper curl on page 100

.

Turn the paper over.

Use paper that is free of cutouts or perforations.

Use high-quality paper that is made for laser printers.

Turn the paper over.

Try another kind of paper, between 100 and 250 Sheffield, 4 to 6% moisture content, or use long-grain paper.

Remove all media from the input tray, straighten the stack, and then load the media in the input tray again. Adjust the media guides to the width and length of the media that you are using and try printing again.

Remove some of the media from the tray. See

Loading media on page 24 .

Verify that the media is not wrinkled, folded, or damaged.

Try printing on media from a new or different package.

If Manual feed appears on the device control-panel display, press Menu/Enter to print the job.

Verify that the device is not in manual feed mode and print your job again.

Contact HP Customer Care. See the support flyer that came in the device box.

Adjust the paper-length adjustment control to the correct length.

ENWW Print problems 89

Performance problems

Try the tips in this section if pages exit the device, but have nothing printed on them, or when the device does not print any pages.

Problem

Pages print but are totally blank.

Cause

The sealing tape might still be in the print cartridge.

The document might contain blank pages.

The device might be malfunctioning.

Pages print slowly.

Pages did not print.

Certain media types can slow the print job.

The device might not be pulling media correctly.

The media is jamming in the device.

The USB cable might be defective or incorrectly connected.

Solution

Verify that the sealing tape has been completely removed from the print cartridge.

Check the document that you are printing to see if content appears on all of the pages.

To check the device, print a Configuration report. See

Information pages on page 64

.

Print on a different type of media.

See

Media-handling problems on page 88 .

Other devices are running on your computer.

Clear the jam. See Clearing jams on page 74 .

Disconnect the USB cable at both ends and reconnect it.

Try printing a job that has printed in the past.

Try using a different USB cable.

The device might not share a USB port. If you have an external hard drive or network switchbox that is connected to the same port as the device, the other device might be interfering. To connect and use the device, you must disconnect the other device or you must use two USB ports on the computer.

90 Chapter 9 Problem solving ENWW

Copy problems

Preventing problems

The following are a few simple steps you can take to improve copy quality:

Use quality originals.

Load the media correctly. If the media is loaded incorrectly, it might skew, causing unclear images and

problems with the OCR program. See Loading documents to copy or scan on page 24 for instructions.

NOTE:

Verify that the media meets HP specifications. If the media meets HP specifications, recurring feed problems indicate the pickup roller or separation pad is worn. Contact HP Customer Care. See the flyer that came in the device box.

Image problems

Problem

Images are missing or faded.

Vertical white or faded stripes appear on the copy.

Cause

The print-cartridge toner-level might be low.

The original might be of poor quality.

The original might have a colored background.

The media might not meet

HP specifications.

The print-cartridge toner-level might be low.

Solution

Replace the print cartridge. See

Changing the print cartridge on page 69 .

If your original is too light or damaged, the copy might not be able to compensate, even if you adjust the contrast. If possible, find an original document in better condition.

Colored backgrounds might cause images in the foreground to blend into the background, or the background might appear in a different shade. If possible, use an original document without a colored background.

Use media that meets HP specifications. See

Media specifications on page 13

.

Replace the print cartridge. See

Changing the print cartridge on page 69 .

Unwanted lines appear on the copy.

The photosensitive drum inside the print cartridge might have been scratched.

Install a new HP print cartridge. See Changing the print cartridge on page 69 .

ENWW Copy problems 91

Problem

Black dots or streaks appear on the copy.

Copies are too light or dark.

Text is unclear.

Cause

Ink, glue, correction fluid, or an unwanted substance might be on the flatbed scanner.

The printer driver or device settings may be incorrect.

The printer driver or device settings may be incorrect.

Solution

Clean the device. See Cleaning the device on page 67

.

Verify that the quality settings are correct. See

Adjusting the copy quality on page 42 .

Verify that the quality settings are correct. See

Adjusting the copy quality on page 42 .

Media-handling problems

Problem Cause

Poor print quality or toner adhesion

The paper is too moist, too rough, too heavy or too smooth, or it is embossed or from a faulty paper lot.

Dropouts, jamming, or curl The paper has been stored incorrectly.

Excessive curl

The paper has variability from one side to the other.

The paper is too moist, has the wrong grain direction, or is of short-grain construction.

The paper varies from side-to-side.

The paper has cutouts or perforations.

Jamming, damage to device

Problems with feeding The paper has ragged edges.

The paper varies from side-to-side.

The paper is too moist, too rough, too heavy or too smooth, has the wrong grain direction, or is of short-grain construction or it is embossed or from a faulty paper lot.

Print is skewed (crooked).

The media guides might be incorrectly adjusted.

More than one sheet feeds at one time.

The device does not pull media from the media input tray.

The media tray might be overloaded.

The media might be wrinkled, folded, or damaged.

The device might be in manual feed mode.

Solution

Try another kind of paper, between 100 and 250 Sheffield, 4 to 6% moisture content.

Store paper flat in its moisture-proof wrapping.

Turn the paper over.

Use long-grain paper, or use the Less paper curl setting. See

Reducing paper curl on page 100 .

Turn the paper over.

Use paper that is free of cutouts or perforations.

Use high-quality paper that is made for laser printers.

Turn the paper over.

Try another kind of paper, between 100 and 250 Sheffield, 4 to 6% moisture content, or use long-grain paper.

Remove all media from the input tray, straighten the stack, and then load the media in the input tray again. Adjust the media guides to the width and length of the media that you are using and try printing again.

Remove some of the media from the tray. See

Loading media on page 24

.

Verify that the media is not wrinkled, folded, or damaged.

Try printing on media from a new or different package.

If Manual feed appears on the device control-panel display, press Menu/Enter to print the job.

● Verify that the device is not in manual feed mode and print your job again.

92 Chapter 9 Problem solving ENWW

Problem Cause

The pickup roller might be dirty or damaged.

The paper-length adjustment control in tray 1 is set at a length that is greater than the media size.

Solution

Contact HP Customer Care. See the support flyer that came in the device box.

Adjust the paper-length adjustment control to the correct length.

ENWW Copy problems 93

Performance problems

Problem

No copy came out.

Copies are blank.

Cause

The input tray might be empty.

The original might have been loaded incorrectly.

The sealing tape might not have been removed from the print cartridge.

The original might have been loaded incorrectly.

The media might not meet

HP specifications.

The print-cartridge toner-level might be low.

Copies are reduced in size. The device settings might be set to reduce the scanned image.

Solution

Load media in the device. See

Loading media on page 24

for more information.

On the flatbed scanner, place the original document facedown with the upper-left corner of the document at the lower-right corner of the glass.

Remove the print cartridge from the device, pull out the sealing tape, and reinstall the print cartridge.

On the flatbed scanner, make sure that the original document is placed face-down with the upper-left corner of the document at the lower-right corner of the glass.

Use media that meets HP specifications. See

Media specifications on page 13 .

Replace the print cartridge. See

Changing the print cartridge on page 69

.

Verify that the reduction/enlargement settings are correct at the device control panel.

94 Chapter 9 Problem solving ENWW

Scan problems

Solving scanned-image problems

Problem

The scanned image is of poor quality.

Part of the image did not scan.

The scan takes too long

Cause

The original might be a secondgeneration photo or picture.

The image that appears on the screen might not be an accurate representation of the quality of the scan.

Solution

To eliminate the patterns, try reducing the size of the image after scanning.

Print the scanned image to see if the quality is better.

Verify that your resolution and color settings are correct for the type of scan job that you are performing. See

Scanner resolution and color on page 61 .

Try adjusting your computer monitor settings to use more colors (or levels of gray). Typically, you make this adjustment by opening Display in Windows Control

Panel.

The original might have been loaded incorrectly.

The scanner might be dirty.

The graphics settings might not be suitable for the type of scan job that you are performing.

The original might have been loaded incorrectly.

A colored background might be causing images in the foreground to blend into the background.

The original is too small.

The media size is incorrect.

The resolution or color level is set too high.

The software is set to scan in color.

A print job or copy job was sent before you tried to scan.

● Try adjusting the resolution and color settings in the scanner software. See

Scanner resolution and color on page 61 .

Make sure that you have loaded the original correctly on the

flatbed scanner. See Loading documents to copy or scan on page 24 .

Clean the scanner. See To clean the scanner glass on page 67 .

Try changing the graphics settings. See

Scanner resolution and color on page 61

.

Make sure that the original is placed correctly on the flatbed scanner.

Try adjusting the settings before you scan the original or

enhancing the image after you scan the original. See Scanner resolution and color on page 61 .

The minimum size that the flatbed scanner supports is 25 x

25 mm (1 x 1 inch).

In Scan settings, make sure that the input media size is large

enough for the document that you are scanning. See Scanner resolution and color on page 61 .

Change the resolution and color level settings to the correct

settings for your job. See Scanner resolution and color on page 61 .

The system default is color, which takes longer to scan even when scanning a monochrome original. If you acquire an image through TWAIN or WIA, you can change the settings so that the original scans in grayscale or black-and-white. See the device software Help for details.

If someone sent a print job or copy job before you tried to scan, the scan will start if the scanner is not busy. However, because the device and scanner share memory, the scan might be slower.

ENWW Scan problems 95

Scan-quality problems

Preventing problems

The following are a few simple steps you can take to improve scan quality.

Use high-quality originals.

Load the media correctly. If the media is loaded incorrectly, it might skew, which causes unclear images.

See Loading media on page 24

for instructions.

Adjust the software settings according to how you plan to use the scanned page. See

Scanner resolution and color on page 61 for more information.

Solving scan-quality problems

Problem

Blank pages

Too light or dark

Unwanted lines

Black dots or streaks

Unclear text

Cause

The original might have been loaded upside down.

The resolution and color levels may be set incorrectly.

Ink, glue, correction fluid, or an unwanted substance might be on the glass.

Ink, glue, correction fluid, or an unwanted substance might be on the glass.

The resolution and color levels may be set incorrectly.

Solution

On the flatbed scanner, place the original document facedown with the upper-left corner of the document at the lower-right corner of the glass.

Verify that you have the correct resolution and color settings. See

Scanner resolution and color on page 61

.

Clean the flatbed scanner surface. See

To clean the scanner glass on page 67 .

Clean the flatbed scanner surface. See

To clean the scanner glass on page 67 .

Verify that you have the correct resolution and color settings. See

Scanner resolution and color on page 61

.

96 Chapter 9 Problem solving ENWW

Control-panel display problems

CAUTION:

Static electricity can cause unexpected black lines, dots, or characters to appear on the device control-panel display. Do not touch the device control-panel display if there is a chance that you have collected a static electric charge (for example, by walking on carpet in a low-humidity environment).

Unexpected lines, dots, or characters might appear on the device control-panel display, or the display might become blank if the device is exposed to an electric or magnetic field. To resolve this problem, perform the following procedure:

1.

Turn the device off.

2.

Remove the device from the electric or magnetic field.

3.

Turn the device on again.

ENWW Control-panel display problems 97

Solving common Macintosh problems

Problems with Mac OS X V10.3 and Mac OS X V10.4

The printer driver is not listed in Print Center.

Cause

The device software might not have been installed or was installed incorrectly.

Solution

Reinstall the software. See the getting started guide for instructions.

The device name does not appear in the printer list box in the print center.

Cause Solution

The device might not be ready.

The wrong device name is being used.

The interface cable might be defective or of poor quality.

Make sure that the cables are connected correctly, the device is on, and the ready light is on. If you are connecting through a USB hub, try connecting directly to the computer or use a different port.

Print a Configuration report. See

Information pages on page 64 . Verify

that the name on the Configuration report matches the device name in the Print Center.

Replace the interface cable. Make sure to use a high-quality cable.

A print job was not sent to the printer that you wanted.

Cause

The print queue might be stopped.

Solution

Restart the print queue. Open print monitor and select Start Jobs.

An encapsulated PostScript (EPS) file does not print with the correct fonts.

Cause Solution

This problem occurs with some programs.

Try downloading the fonts that are contained in the EPS file to the device before printing.

Send the file in ASCII format instead of binary encoding.

You are unable to print from a third-party USB card.

Cause

This error occurs when the software for USB printers is not installed.

Solution

When adding a third-party USB card, you might need the Apple USB

Adapter Card Support software. The most current version of this software is available from the Apple Web site.

98 Chapter 9 Problem solving ENWW

The device does not appear in the Macintosh Print Center after the driver is selected.

Cause Solution

This problem is caused by either a software or a hardware component.

Software problem solving

● Check that your Macintosh supports USB.

Verify that your Macintosh operating system is Mac OS X V10.3 or

Mac OS X V10.4.

● Ensure that your Macintosh has the appropriate USB software from

Apple.

Hardware problem solving

● Check that the device is turned on.

Verify that the USB cable is connected correctly.

Check that you are using the appropriate high-speed USB cable.

Ensure that you do not have too many USB devices drawing power from the chain. Disconnect all of the devices from the chain, and connect the cable directly to the USB port on the host computer.

● Check to see if more than two nonpowered USB hubs are connected in a row on the chain. Disconnect all of the devices from the chain and connect the cable directly to the USB port on the host computer.

NOTE:

The iMac keyboard is a nonpowered USB hub.

ENWW Solving common Macintosh problems 99

Problem-solving tools

The section describes the tools that can help you solve problems with your device.

Restoring the factory-set defaults

Restoring the factory-set defaults returns all of the settings to the factory defaults.

CAUTION:

This procedure deletes any pages that are stored in the memory. The procedure then automatically restarts the device.

1.

On the device control panel, press Menu/Enter .

2.

Use the < or the > button to select Service, and then press Menu/Enter .

3.

Use the < or the > button to select Restore defaults, and then press Menu/Enter .

The device automatically restarts.

Reducing paper curl

Use the Less paper curl setting to reduce curl in printed media.

1.

On the device control panel, press Menu/Enter .

2.

Use the < or the > button to select Service, and then press Menu/Enter .

3.

Use the < or the > button to select Less paper curl, and then press Menu/Enter .

4.

Use the < or the > button to select On, and then press Menu/Enter .

100 Chapter 9 Problem solving ENWW

A Accessories and ordering information

Supplies

Cable and interface accessories

User-replaceable parts

Paper and other print media

The following list of accessories was current at the time of printing. Ordering information and availability of the accessories might change during the life of the device. For the most current ordering information, visit the most appropriate of the following Web sites:

North America: www.hp.com/go/ordersupplies-na

Europe and Middle East: www.hp.com/go/ordersupplies-emea

Asia Pacific countries/regions: www.hp.com/go/ordersupplies-ap

Latin America: www.hp.com/go/ordersupplies-la

ENWW 101

Supplies

Product name

Black print cartridge

Description

Average yield for the standard print cartridge is approximately 2,000 pages.

Actual yield depends on use.

Part number

Q2612A

Cable and interface accessories

Product name

USB cable

Description

2-meter standard USB-compatible device connector

Part number

C6518A

User-replaceable parts

Product name

Separation pad and pickup rollers

Description

Replace when the device is picking up multiple sheets or no sheets. Trying different paper did not resolve the problem.

Part number

Contact HP Customer Care to order parts.

Paper and other print media

NOTE:

Inkjet paper is not recommended for the device.

Product name

HP LaserJet paper

Description

Premium HP-brand paper for use with HP LaserJet printers.

HP bond paper with a weight of 120 g/m

2

(32 lb).

Part number

HPJ1124 (letter)

HPU1132 (letter) HP Premium Choice LaserJet paper

HP Cover paper

HP Printing paper

HP Multipurpose paper

HP LaserJet Tough paper

HP High Gloss laser paper

HP Soft Gloss laser paper

HP-brand paper with a weight of 200 g/m covers.

2 (75-lb cover). Use for printing postcards and document

Q2413A (letter) 100 sheets

HP-brand paper for use with HP LaserJet printers.

HPP1122 (letter)

HP-brand paper for a variety of uses.

Robust paper with a satin finish. Paper will not tear and will withstand the weather. For documents requiring durability and longevity.

HPM1120 (letter)

Q1298A (letter)

High-gloss finish coating on both sides. Use for brochures, catalogs, photographs, and whenever a high-gloss finish is desired.

Satin finish coating on both sides, 105 g/m

2

(28 lb).

Q2419A (letter) 200 sheets

Q2415A (letter) 500 sheets

102 Appendix A Accessories and ordering information ENWW

Product name

HP Brochure Laser Paper, Matte

Description

High opacity for two-sided printing with no showthrough, 44 lb.

High-contrast glossy finish, 32 lb.

HP Photo and Imaging Laser

Paper, Glossy

HP Photo and Imaging Laser

Paper, Matte

HP Presentation Laser Paper, Soft

Gloss

HP Recycled Content Paper

High-contrast matte finish, 52 lb.

Bright white for high contrast, 32 lb.

Matte finish on both sides, contains 30 percent post-consumer content (satisfies US Executive

Order 13101), 75 g/m

2

(20-lb bond).

Part number

Q6543A (letter) 150 sheets

Q6545A (letter) 200 sheets

Q6549A (letter) 100 sheets

Q6541A (letter) 200 sheets

HPE1120 (letter) 500 sheets

ENWW Paper and other print media 103

104 Appendix A Accessories and ordering information ENWW

B Service and support

HP limited warranty statement

HP's Premium Protection Warranty: LaserJet toner cartridge limited warranty statement

HP policy on non-HP supplies

HP anticounterfeit Web site

Data stored on the toner cartridge

End User License Agreement

Customer self-repair warranty service

Customer support

ENWW 105

HP limited warranty statement

HP PRODUCT

HP LaserJet M1005 MFP

DURATION OF LIMITED WARRANTY

One-year limited warranty

HP warrants to you, the end-user customer, that HP hardware and accessories will be free from defects in materials and workmanship after the date of purchase, for the period specified above. If HP receives notice of such defects during the warranty period, HP will, at its option, either repair or replace products which prove to be defective. Replacement products may be either new or equivalent in performance to new.

HP warrants to you that HP software will not fail to execute its programming instructions after the date of purchase, for the period specified above, due to defects in material and workmanship when properly installed and used. If HP receives notice of such defects during the warranty period, HP will replace software which does not execute its programming instructions due to such defects.

HP does not warrant that the operation of HP products will be uninterrupted or error free. If HP is unable, within a reasonable time, to repair or replace any product to a condition as warranted, you will be entitled to a refund of the purchase price upon prompt return of the product.

HP products may contain remanufactured parts equivalent to new in performance or may have been subject to incidental use.

Warranty does not apply to defects resulting from (a) improper or inadequate maintenance or calibration, (b) software, interfacing, parts or supplies not supplied by HP, (c) unauthorized modification or misuse, (d) operation outside of the published environmental specifications for the product, or (e) improper site preparation or maintenance.

TO THE EXTENT ALLOWED BY LOCAL LAW, THE ABOVE WARRANTIES ARE EXCLUSIVE AND NO OTHER

WARRANTY OR CONDITION, WHETHER WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED AND HP SPECIFICALLY

DISCLAIMS ANY IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, AND

FITNESS FOR A PARTICULAR PURPOSE. Some countries/regions, states or provinces do not allow limitations on the duration of an implied warranty, so the above limitation or exclusion might not apply to you. This warranty gives you specific legal rights and you might also have other rights that vary from country/region to country/region, state to state, or province to province.

HP's limited warranty is valid in any country/region or locality where HP has a support presence for this product and where HP has marketed this product. The level of warranty service you receive may vary according to local standards. HP will not alter form, fit or function of the product to make it operate in a country/region for which it was never intended to function for legal or regulatory reasons.

TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS WARRANTY STATEMENT ARE YOUR SOLE

AND EXCLUSIVE REMEDIES. EXCEPT AS INDICATED ABOVE, IN NO EVENT WILL HP OR ITS SUPPLIERS BE LIABLE

FOR LOSS OF DATA OR FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL (INCLUDING LOST PROFIT OR

DATA), OR OTHER DAMAGE, WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. Some countries/regions, states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

THE WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO THE EXTENT LAWFULLY PERMITTED, DO

NOT EXCLUDE, RESTRICT OR MODIFY AND ARE IN ADDITION TO THE MANDATORY STATUTORY RIGHTS

APPLICABLE TO THE SALE OF THIS PRODUCT TO YOU.

106 Appendix B Service and support ENWW

UK, Ireland, and Malta

The HP Limited Warranty is a commercial guarantee voluntarily provided by HP. The name and address of the

HP entity responsible for the performance of the HP Limited Warranty in your country/region is as follows:

UK: HP Inc UK Limited, Cain Road, Amen Corner, Bracknell, Berkshire, RG12 1HN

Ireland: Hewlett-Packard Ireland Limited, Liffey Park Technology Campus, Barnhall Road, Leixlip, Co.Kildare

Malta: Hewlett-Packard Europe B.V., Amsterdam, Meyrin Branch, Route du Nant-d'Avril 150, 1217 Meyrin,

Switzerland

United Kingdom: The HP Limited Warranty benefits apply in addition to any legal rights to a guarantee from seller of nonconformity of goods with the contract of sale. These rights expire six years from delivery of goods for products purchased in England or Wales and five years from delivery of goods for products purchased in Scotland. However various factors may impact your eligibility to receive these rights. For further information, please consult the following link: Consumer Legal Guarantee ( www.hp.com/go/eu-legal ) or you may visit the European Consumer Centers website ( http://ec.europa.eu/consumers/ solving_consumer_disputes/non-judicial_redress/ecc-net/index_en.htm

). Consumers have the right to choose whether to claim service under the HP Limited Warranty or against the seller under the legal guarantee.

Ireland: The HP Limited Warranty benefits apply in addition to any statutory rights from seller in relation to nonconformity of goods with the contract of sale. However various factors may impact your eligibility to receive these rights. Consumer statutory rights are not limited or affected in any manner by HP Care Pack.

For further information, please consult the following link: Consumer Legal Guarantee ( www.hp.com/go/eulegal ) or you may visit the European Consumer Centers website ( http://ec.europa.eu/consumers/ solving_consumer_disputes/non-judicial_redress/ecc-net/index_en.htm

). Consumers have the right to choose whether to claim service under the HP Limited Warranty or against the seller under the legal guarantee.

Malta: The HP Limited Warranty benefits apply in addition to any legal rights to a two-year guarantee from seller of nonconformity of goods with the contract of sale; however various factors may impact your eligibility to receive these rights. Consumer statutory rights are not limited or affected in any manner by the

HP Limited Warranty. For further information, please consult the following link: Consumer Legal Guarantee

( www.hp.com/go/eu-legal ) or you may visit the European Consumer Centers website ( http://ec.europa.eu/ consumers/solving_consumer_disputes/non-judicial_redress/ecc-net/index_en.htm

). Consumers have the right to choose whether to claim service under the HP Limited Warranty or against the seller under two-year legal guarantee.

Austria, Belgium, Germany, and Luxemburg

Die beschränkte HP Herstellergarantie ist eine von HP auf freiwilliger Basis angebotene kommerzielle

Garantie. Der Name und die Adresse der HP Gesellschaft, die in Ihrem Land für die Gewährung der beschränkten HP Herstellergarantie verantwortlich ist, sind wie folgt:

Deutschland: HP Deutschland GmbH, Schickardstr. 32, D-71034 Böblingen

Österreich: HP PPS Austria GmbH., Wienerbergstrasse 41, A-1120 Wien

Luxemburg: Hewlett-Packard Luxembourg S.C.A., 75, Parc d'Activités Capellen, Rue Pafebruc, L-8308

Capellen

Belgien: HP Belgium BVBA, Hermeslaan 1A, B-1831 Diegem

Die Rechte aus der beschränkten HP Herstellergarantie gelten zusätzlich zu den gesetzlichen Ansprüchen wegen Sachmängeln auf eine zweijährige Gewährleistung ab dem Lieferdatum. Ob Sie Anspruch auf diese

ENWW HP limited warranty statement 107

Rechte haben, hängt von zahlreichen Faktoren ab. Die Rechte des Kunden sind in keiner Weise durch die beschränkte HP Herstellergarantie eingeschränkt bzw. betroffen. Weitere Hinweise finden Sie auf der folgenden Website: Gewährleistungsansprüche für Verbraucher ( www.hp.com/go/eu-legal ) oder Sie können die Website des Europäischen Verbraucherzentrums ( http://ec.europa.eu/consumers/ solving_consumer_disputes/non-judicial_redress/ecc-net/index_en.htm

) besuchen. Verbraucher haben das

Recht zu wählen, ob sie eine Leistung von HP gemäß der beschränkten HP Herstellergarantie in Anspruch nehmen oder ob sie sich gemäß der gesetzlichen zweijährigen Haftung für Sachmängel (Gewährleistung) sich an den jeweiligen Verkäufer wenden.

Belgium, France, and Luxemburg

La garantie limitée HP est une garantie commerciale fournie volontairement par HP. Voici les coordonnées de l'entité HP responsable de l'exécution de la garantie limitée HP dans votre pays:

France: HP France SAS, société par actions simplifiée identifiée sous le numéro 448 694 133 RCS Evry, 1

Avenue du Canada, 91947, Les Ulis

G.D. Luxembourg: Hewlett-Packard Luxembourg S.C.A., 75, Parc d'Activités Capellen, Rue Pafebruc, L-8308

Capellen

Belgique: HP Belgium BVBA, Hermeslaan 1A, B-1831 Diegem

France: Les avantages de la garantie limitée HP s'appliquent en complément des droits dont vous disposez au titre des garanties légales applicables dont le bénéfice est soumis à des conditions spécifiques. Vos droits en tant que consommateur au titre de la garantie légale de conformité mentionnée aux articles L. 211-4 à L.

211-13 du Code de la Consommation et de celle relatives aux défauts de la chose vendue, dans les conditions prévues aux articles 1641 à 1648 et 2232 du Code de Commerce ne sont en aucune façon limités ou affectés par la garantie limitée HP. Pour de plus amples informations, veuillez consulter le lien suivant : Garanties légales accordées au consommateur ( www.hp.com/go/eu-legal ). Vous pouvez également consulter le site

Web des Centres européens des consommateurs ( http://ec.europa.eu/consumers/ solving_consumer_disputes/non-judicial_redress/ecc-net/index_en.htm

). Les consommateurs ont le droit de choisir d’exercer leurs droits au titre de la garantie limitée HP, ou auprès du vendeur au titre des garanties légales applicables mentionnées ci-dessus.

POUR RAPPEL:

Garantie Légale de Conformité:

« Le vendeur est tenu de livrer un bien conforme au contrat et répond des défauts de conformité existant lors de la délivrance.

Il répond également des défauts de conformité résultant de l'emballage, des instructions de montage ou de l'installation lorsque celle-ci a été mise à sa charge par le contrat ou a été réalisée sous sa responsabilité ».

Article L211-5 du Code de la Consommation:

« Pour être conforme au contrat, le bien doit:

1° Etre propre à l'usage habituellement attendu d'un bien semblable et, le cas échéant:

- correspondre à la description donnée par le vendeur et posséder les qualités que celui-ci a présentées à l'acheteur sous forme d'échantillon ou de modèle;

- présenter les qualités qu'un acheteur peut légitimement attendre eu égard aux déclarations publiques faites par le vendeur, par le producteur ou par son représentant, notamment dans la publicité ou l'étiquetage;

2° Ou présenter les caractéristiques définies d'un commun accord par les parties ou être propre à tout usage spécial recherché par l'acheteur, porté à la connaissance du vendeur et que ce dernier a accepté ».

108 Appendix B Service and support ENWW

Article L211-12 du Code de la Consommation:

« L'action résultant du défaut de conformité se prescrit par deux ans à compter de la délivrance du bien ».

Garantie des vices cachés

Article 1641 du Code Civil : « Le vendeur est tenu de la garantie à raison des défauts cachés de la chose vendue

qui la rendent impropre à l'usage auquel on la destine, ou qui diminuent tellement cet usage que l'acheteur ne l'aurait pas acquise, ou n'en aurait donné qu'un moindre prix, s'il les avait connus. »

Article 1648 alinéa 1 du Code Civil:

« L'action résultant des vices rédhibitoires doit être intentée par l'acquéreur dans un délai de deux ans à compter de la découverte du vice. »

G.D. Luxembourg et Belgique: Les avantages de la garantie limitée HP s'appliquent en complément des droits dont vous disposez au titre de la garantie de non-conformité des biens avec le contrat de vente.

Cependant, de nombreux facteurs peuvent avoir un impact sur le bénéfice de ces droits. Vos droits en tant que consommateur au titre de ces garanties ne sont en aucune façon limités ou affectés par la garantie limitée HP. Pour de plus amples informations, veuillez consulter le lien suivant : Garanties légales accordées au consommateur ( www.hp.com/go/eu-legal ) ou vous pouvez également consulter le site Web des Centres européens des consommateurs ( http://ec.europa.eu/consumers/solving_consumer_disputes/nonjudicial_redress/ecc-net/index_en.htm

). Les consommateurs ont le droit de choisir de réclamer un service sous la garantie limitée HP ou auprès du vendeur au cours d'une garantie légale de deux ans.

Italy

La Garanzia limitata HP è una garanzia commerciale fornita volontariamente da HP. Di seguito sono indicati nome e indirizzo della società HP responsabile della fornitura dei servizi coperti dalla Garanzia limitata HP nel vostro Paese:

Italia: HP Italy S.r.l., Via G. Di Vittorio 9, 20063 Cernusco S/Naviglio

I vantaggi della Garanzia limitata HP vengono concessi ai consumatori in aggiunta ai diritti derivanti dalla garanzia di due anni fornita dal venditore in caso di non conformità dei beni rispetto al contratto di vendita.

Tuttavia, diversi fattori possono avere un impatto sulla possibilita’ di beneficiare di tali diritti. I diritti spettanti ai consumatori in forza della garanzia legale non sono in alcun modo limitati, né modificati dalla

Garanzia limitata HP. Per ulteriori informazioni, si prega di consultare il seguente link: Garanzia legale per i clienti ( www.hp.com/go/eu-legal ), oppure visitare il sito Web dei Centri europei per i consumatori

( http://ec.europa.eu/consumers/solving_consumer_disputes/non-judicial_redress/ecc-net/index_en.htm

). I consumatori hanno il diritto di scegliere se richiedere un servizio usufruendo della Garanzia limitata HP oppure rivolgendosi al venditore per far valere la garanzia legale di due anni.

Spain

Su Garantía limitada de HP es una garantía comercial voluntariamente proporcionada por HP. El nombre y dirección de las entidades HP que proporcionan la Garantía limitada de HP (garantía comercial adicional del fabricante) en su país es:

España: Hewlett-Packard Española S.L. Calle Vicente Aleixandre, 1 Parque Empresarial Madrid - Las Rozas,

E-28232 Madrid

Los beneficios de la Garantía limitada de HP son adicionales a la garantía legal de 2 años a la que los consumidores tienen derecho a recibir del vendedor en virtud del contrato de compraventa; sin embargo, varios factores pueden afectar su derecho a recibir los beneficios bajo dicha garantía legal. A este respecto, la

Garantía limitada de HP no limita o afecta en modo alguno los derechos legales del consumidor

( www.hp.com/go/eu-legal ). Para más información, consulte el siguiente enlace: Garantía legal del

ENWW HP limited warranty statement 109

consumidor o puede visitar el sitio web de los Centros europeos de los consumidores ( http://ec.europa.eu/ consumers/solving_consumer_disputes/non-judicial_redress/ecc-net/index_en.htm

). Los clientes tienen derecho a elegir si reclaman un servicio acogiéndose a la Garantía limitada de HP o al vendedor de conformidad con la garantía legal de dos años.

Denmark

Den begrænsede HP-garanti er en garanti, der ydes frivilligt af HP. Navn og adresse på det HP-selskab, der er ansvarligt for HP's begrænsede garanti i dit land, er som følger:

Danmark: HP Inc Danmark ApS, Engholm Parkvej 8, 3450, Allerød

Den begrænsede HP-garanti gælder i tillæg til eventuelle juridiske rettigheder, for en toårig garanti fra sælgeren af varer, der ikke er i overensstemmelse med salgsaftalen, men forskellige faktorer kan dog påvirke din ret til at opnå disse rettigheder. Forbrugerens lovbestemte rettigheder begrænses eller påvirkes ikke på nogen måde af den begrænsede HP-garanti. Se nedenstående link for at få yderligere oplysninger:

Forbrugerens juridiske garanti ( www.hp.com/go/eu-legal ) eller du kan besøge De Europæiske

Forbrugercentres websted ( http://ec.europa.eu/consumers/solving_consumer_disputes/nonjudicial_redress/ecc-net/index_en.htm

). Forbrugere har ret til at vælge, om de vil gøre krav på service i henhold til HP's begrænsede garanti eller hos sælger i henhold til en toårig juridisk garanti.

Norway

HPs garanti er en begrenset og kommersiell garanti som HP selv har valgt å tilby. Følgende lokale selskap innestår for garantien:

Norge: HP Norge AS, Rolfbuktveien 4b, 1364 Fornebu

HPs garanti kommer i tillegg til det mangelsansvar HP har i henhold til norsk forbrukerkjøpslovgivning, hvor reklamasjonsperioden kan være to eller fem år, avhengig av hvor lenge salgsgjenstanden var ment å vare.

Ulike faktorer kan imidlertid ha betydning for om du kvalifiserer til å kreve avhjelp iht slikt mangelsansvar.

Forbrukerens lovmessige rettigheter begrenses ikke av HPs garanti. Hvis du vil ha mer informasjon, kan du klikke på følgende kobling: Juridisk garanti for forbruker ( www.hp.com/go/eu-legal ) eller du kan besøke nettstedet til de europeiske forbrukersentrene ( http://ec.europa.eu/consumers/ solving_consumer_disputes/non-judicial_redress/ecc-net/index_en.htm

). Forbrukere har retten til å velge å kreve service under HPs garanti eller iht selgerens lovpålagte mangelsansvar.

Sweden

HP:s begränsade garanti är en kommersiell garanti som tillhandahålls frivilligt av HP. Namn och adress till det HP-företag som ansvarar för HP:s begränsade garanti i ditt land är som följer:

Sverige: HP PPS Sverige AB, SE-169 73 Stockholm

Fördelarna som ingår i HP:s begränsade garanti gäller utöver de lagstadgade rättigheterna till tre års garanti från säljaren angående varans bristande överensstämmelse gentemot köpeavtalet, men olika faktorer kan påverka din rätt att utnyttja dessa rättigheter. Konsumentens lagstadgade rättigheter varken begränsas eller påverkas på något sätt av HP:s begränsade garanti. Mer information får du om du följer denna länk:

Lagstadgad garanti för konsumenter ( www.hp.com/go/eu-legal ) eller så kan du gå till European Consumer

Centers webbplats ( http://ec.europa.eu/consumers/solving_consumer_disputes/non-judicial_redress/eccnet/index_en.htm

). Konsumenter har rätt att välja om de vill ställa krav enligt HP:s begränsade garanti eller på säljaren enligt den lagstadgade treåriga garantin.

110 Appendix B Service and support ENWW

Portugal

A Garantia Limitada HP é uma garantia comercial fornecida voluntariamente pela HP. O nome e a morada da entidade HP responsável pela prestação da Garantia Limitada HP no seu país são os seguintes:

Portugal: HPCP – Computing and Printing Portugal, Unipessoal, Lda., Edificio D. Sancho I, Quinta da Fonte,

Porto Salvo, Lisboa, Oeiras, 2740 244

As vantagens da Garantia Limitada HP aplicam-se cumulativamente com quaisquer direitos decorrentes da legislação aplicável à garantia de dois anos do vendedor, relativa a defeitos do produto e constante do contrato de venda. Existem, contudo, vários fatores que poderão afetar a sua elegibilidade para beneficiar de tais direitos. Os direitos legalmente atribuídos aos consumidores não são limitados ou afetados de forma alguma pela Garantia Limitada HP. Para mais informações, consulte a ligação seguinte: Garantia legal do consumidor ( www.hp.com/go/eu-legal ) ou visite o Web site da Rede dos Centros Europeus do Consumidor

( http://ec.europa.eu/consumers/solving_consumer_disputes/non-judicial_redress/ecc-net/index_en.htm

).

Os consumidores têm o direito de escolher se pretendem reclamar assistência ao abrigo da Garantia Limitada

HP ou contra o vendedor ao abrigo de uma garantia jurídica de dois anos.

Greece and Cyprus

Η Περιορισμένη εγγύηση HP είναι μια εμπορική εγγύηση η οποία παρέχεται εθελοντικά από την HP. Η

επωνυμία και η διεύθυνση του νομικού προσώπου ΗΡ που παρέχει την Περιορισμένη εγγύηση ΗΡ στη χώρα

σας είναι η εξής:

Ελλάδα /Κύπρoς: HP Printing and Personal Systems Hellas EPE, Tzavella 1-3, 15232 Chalandri, Attiki

Ελλάδα /Κύπρoς: HP Συστήματα Εκτύπωσης και Προσωπικών Υπολογιστών Ελλάς Εταιρεία Περιορισμένης

Ευθύνης, Tzavella 1-3, 15232 Chalandri, Attiki

Τα προνόμια της Περιορισμένης εγγύησης HP ισχύουν επιπλέον των νόμιμων δικαιωμάτων για διετή εγγύηση έναντι του Πωλητή για τη μη συμμόρφωση των προϊόντων με τις συνομολογημένες συμβατικά ιδιότητες,

ωστόσο η άσκηση των δικαιωμάτων σας αυτών μπορεί να εξαρτάται από διάφορους παράγοντες. Τα νόμιμα

δικαιώματα των καταναλωτών δεν περιορίζονται ούτε επηρεάζονται καθ’ οιονδήποτε τρόπο από την

Περιορισμένη εγγύηση HP. Για περισσότερες πληροφορίες, συμβουλευτείτε την ακόλουθη τοποθεσία web:

Νόμιμη εγγύηση καταναλωτή ( www.hp.com/go/eu-legal ) ή μπορείτε να επισκεφτείτε την τοποθεσία web των

Ευρωπαϊκών Κέντρων Καταναλωτή ( http://ec.europa.eu/consumers/solving_consumer_disputes/nonjudicial_redress/ecc-net/index_en.htm

). Οι καταναλωτές έχουν το δικαίωμα να επιλέξουν αν θα αξιώσουν

την υπηρεσία στα πλαίσια της Περιορισμένης εγγύησης ΗΡ ή από τον πωλητή στα πλαίσια της νόμιμης

εγγύησης δύο ετών.

Hungary

A HP korlátozott jótállás egy olyan kereskedelmi jótállás, amelyet a HP a saját elhatározásából biztosít. Az egyes országokban a HP mint gyártó által vállalt korlátozott jótállást biztosító HP vállalatok neve és címe:

Magyarország: HP Inc Magyarország Kft., H-1117 Budapest, Alíz utca 1.

A HP korlátozott jótállásban biztosított jogok azokon a jogokon felül illetik meg Önt, amelyek a termékeknek az adásvételi szerződés szerinti minőségére vonatkozó kétéves, jogszabályban foglalt eladói szavatosságból, továbbá ha az Ön által vásárolt termékre alkalmazandó, a jogszabályban foglalt kötelező eladói jótállásból erednek, azonban számos körülmény hatással lehet arra, hogy ezek a jogok Önt megilletike. További információért kérjük, keresse fel a következő webhelyet: Jogi Tájékoztató Fogyasztóknak

( www.hp.com/go/eu-legal ) vagy látogassa meg az Európai Fogyasztói Központok webhelyét

( http://ec.europa.eu/consumers/solving_consumer_disputes/non-judicial_redress/ecc-net/index_en.htm

). A fogyasztóknak jogában áll, hogy megválasszák, hogy a jótállással kapcsolatos igényüket a HP korlátozott

ENWW HP limited warranty statement 111

jótállás alapján vagy a kétéves, jogszabályban foglalt eladói szavatosság, illetve, ha alkalmazandó, a jogszabályban foglalt kötelező eladói jótállás alapján érvényesítik.

Czech Republic

Omezená záruka HP je obchodní zárukou dobrovolně poskytovanou společností HP. Názvy a adresy společností skupiny HP, které odpovídají za plnění omezené záruky HP ve vaší zemi, jsou následující:

Česká republika: HP Inc Czech Republic s. r. o., Za Brumlovkou 5/1559, 140 00 Praha 4

Výhody, poskytované omezenou zárukou HP, se uplatňuji jako doplňek k jakýmkoli právním nárokům na dvouletou záruku poskytnutou prodejcem v případě nesouladu zboží s kupní smlouvou. Váš nárok na uznání těchto práv však může záviset na mnohých faktorech. Omezená záruka HP žádným způsobem neomezuje ani neovlivňuje zákonná práva zákazníka. Další informace získáte kliknutím na následující odkaz: Zákonná záruka spotřebitele ( www.hp.com/go/eu-legal ) případně můžete navštívit webové stránky Evropského spotřebitelského centra ( http://ec.europa.eu/consumers/solving_consumer_disputes/non-judicial_redress/ ecc-net/index_en.htm

). Spotřebitelé mají právo se rozhodnout, zda chtějí službu reklamovat v rámci omezené záruky HP nebo v rámci zákonem stanovené dvouleté záruky u prodejce.

Slovakia

Obmedzená záruka HP je obchodná záruka, ktorú spoločnosť HP poskytuje dobrovoľne. Meno a adresa subjektu HP, ktorý zabezpečuje plnenie vyplývajúce z Obmedzenej záruky HP vo vašej krajine:

Slovenská republika: HP Inc Slovakia, s.r.o., Galvaniho 7, 821 04 Bratislava

Výhody Obmedzenej záruky HP sa uplatnia vedľa prípadných zákazníkových zákonných nárokov voči predávajúcemu z vád, ktoré spočívajú v nesúlade vlastností tovaru s jeho popisom podľa predmetnej zmluvy.

Možnosť uplatnenia takých prípadných nárokov však môže závisieť od rôznych faktorov. Služby Obmedzenej záruky HP žiadnym spôsobom neobmedzujú ani neovplyvňujú zákonné práva zákazníka, ktorý je spotrebiteľom. Ďalšie informácie nájdete na nasledujúcom prepojení: Zákonná záruka spotrebiteľa

( www.hp.com/go/eu-legal ), prípadne môžete navštíviť webovú lokalitu európskych zákazníckych stredísk

( http://ec.europa.eu/consumers/solving_consumer_disputes/non-judicial_redress/ecc-net/index_en.htm

).

Spotrebitelia majú právo zvoliť si, či chcú uplatniť servis v rámci Obmedzenej záruky HP alebo počas zákonnej dvojročnej záručnej lehoty u predajcu.

Poland

Ograniczona gwarancja HP to komercyjna gwarancja udzielona dobrowolnie przez HP. Nazwa i adres podmiotu HP odpowiedzialnego za realizację Ograniczonej gwarancji HP w Polsce:

Polska: HP Inc Polska sp. z o.o., Szturmowa 2a, 02-678 Warszawa, wpisana do rejestru przedsiębiorców prowadzonego przez Sąd Rejonowy dla m.st. Warszawy w Warszawie, XIII Wydział Gospodarczy Krajowego

Rejestru Sądowego, pod numerem KRS 0000546115, NIP 5213690563, REGON 360916326, GIOŚ

E0020757WZBW, kapitał zakładowy 480.000 PLN.

Świadczenia wynikające z Ograniczonej gwarancji HP stanowią dodatek do praw przysługujących nabywcy w związku z dwuletnią odpowiedzialnością sprzedawcy z tytułu niezgodności towaru z umową (rękojmia).

Niemniej, na możliwość korzystania z tych praw mają wpływ różne czynniki. Ograniczona gwarancja HP w żaden sposób nie ogranicza praw konsumenta ani na nie nie wpływa. Więcej informacji można znaleźć pod następującym łączem: Gwarancja prawna konsumenta ( www.hp.com/go/eu-legal ), można także odwiedzić stronę internetową Europejskiego Centrum Konsumenckiego ( http://ec.europa.eu/consumers/ solving_consumer_disputes/non-judicial_redress/ecc-net/index_en.htm

). Konsumenci mają prawo wyboru co do możliwosci skorzystania albo z usług gwarancyjnych przysługujących w ramach Ograniczonej gwarancji

HP albo z uprawnień wynikających z dwuletniej rękojmi w stosunku do sprzedawcy.

112 Appendix B Service and support ENWW

Bulgaria

Ограничената гаранция на HP представлява търговска гаранция, доброволно предоставяна от HP.

Името и адресът на дружеството на HP за вашата страна, отговорно за предоставянето на гаранционната поддръжка в рамките на Ограничената гаранция на HP, са както следва:

HP Inc Bulgaria EOOD (Ейч Пи Инк България ЕООД), гр. София 1766, район р-н Младост, бул.

Околовръстен Път No 258, Бизнес Център Камбаните

Предимствата на Ограничената гаранция на HP се прилагат в допълнение към всички законови права за двугодишна гаранция от продавача при несъответствие на стоката с договора за продажба. Въпреки това, различни фактори могат да окажат влияние върху условията за получаване на тези права.

Законовите права на потребителите не са ограничени или засегнати по никакъв начин от Ограничената гаранция на HP. За допълнителна информация, моля вижте Правната гаранция на потребителя

( www.hp.com/go/eu-legal ) или посетете уебсайта на Европейския потребителски център

( http://ec.europa.eu/consumers/solving_consumer_disputes/non-judicial_redress/ecc-net/index_en.htm

).

Потребителите имат правото да избират дали да претендират за извършване на услуга в рамките на

Ограничената гаранция на HP или да потърсят такава от търговеца в рамките на двугодишната правна гаранция.

Romania

Garanția limitată HP este o garanție comercială furnizată în mod voluntar de către HP. Numele și adresa entității HP răspunzătoare de punerea în aplicare a Garanției limitate HP în țara dumneavoastră sunt următoarele:

Romănia: HP Inc Romania SRL, 6 Dimitrie Pompeiu Boulevard, Building E, 2nd floor, 2nd District, Bucureşti

Beneficiile Garanției limitate HP se aplică suplimentar faţă de orice drepturi privind garanţia de doi ani oferită de vânzător pentru neconformitatea bunurilor cu contractul de vânzare; cu toate acestea, diverşi factori pot avea impact asupra eligibilităţii dvs. de a beneficia de aceste drepturi. Drepturile legale ale consumatorului nu sunt limitate sau afectate în vreun fel de Garanția limitată HP. Pentru informaţii suplimentare consultaţi următorul link: garanția acordată consumatorului prin lege ( www.hp.com/go/eu-legal ) sau puteți accesa site-ul Centrul European al Consumatorilor ( http://ec.europa.eu/consumers/solving_consumer_disputes/ non-judicial_redress/ecc-net/index_en.htm

). Consumatorii au dreptul să aleagă dacă să pretindă despăgubiri

în cadrul Garanței limitate HP sau de la vânzător, în cadrul garanției legale de doi ani.

Belgium and the Netherlands

De Beperkte Garantie van HP is een commerciële garantie vrijwillig verstrekt door HP. De naam en het adres van de HP-entiteit die verantwoordelijk is voor het uitvoeren van de Beperkte Garantie van HP in uw land is als volgt:

Nederland: HP Nederland B.V., Startbaan 16, 1187 XR Amstelveen

België: HP Belgium BVBA, Hermeslaan 1A, B-1831 Diegem

De voordelen van de Beperkte Garantie van HP vormen een aanvulling op de wettelijke garantie voor consumenten gedurende twee jaren na de levering te verlenen door de verkoper bij een gebrek aan conformiteit van de goederen met de relevante verkoopsovereenkomst. Niettemin kunnen diverse factoren een impact hebben op uw eventuele aanspraak op deze wettelijke rechten. De wettelijke rechten van de consument worden op geen enkele wijze beperkt of beïnvloed door de Beperkte Garantie van HP. Raadpleeg voor meer informatie de volgende webpagina: Wettelijke garantie van de consument ( www.hp.com/go/eulegal ) of u kan de website van het Europees Consumenten Centrum bezoeken ( http://ec.europa.eu/ consumers/solving_consumer_disputes/non-judicial_redress/ecc-net/index_en.htm

). Consumenten hebben

ENWW HP limited warranty statement 113

het recht om te kiezen tussen enerzijds de Beperkte Garantie van HP of anderzijds het aanspreken van de verkoper in toepassing van de wettelijke garantie.

Finland

HP:n rajoitettu takuu on HP:n vapaaehtoisesti antama kaupallinen takuu. HP:n myöntämästä takuusta maassanne vastaavan HP:n edustajan yhteystiedot ovat:

Suomi: HP Finland Oy, Piispankalliontie, FIN - 02200 Espoo

HP:n takuun edut ovat voimassa mahdollisten kuluttajansuojalakiin perustuvien oikeuksien lisäksi sen varalta, että tuote ei vastaa myyntisopimusta. Saat lisätietoja seuraavasta linkistä: Kuluttajansuoja

( www.hp.com/go/eu-legal ) tai voit käydä Euroopan kuluttajakeskuksen sivustolla ( http://ec.europa.eu/ consumers/solving_consumer_disputes/non-judicial_redress/ecc-net/index_en.htm

). Kuluttajilla on oikeus vaatia virheen korjausta HP:n takuun ja kuluttajansuojan perusteella HP:lta tai myyjältä.

Slovenia

Omejena garancija HP je prostovoljna trgovska garancija, ki jo zagotavlja podjetje HP. Ime in naslov poslovne enote HP, ki je odgovorna za omejeno garancijo HP v vaši državi, sta naslednja:

Slovenija: Hewlett-Packard Europe B.V., Amsterdam, Meyrin Branch, Route du Nant-d'Avril 150, 1217 Meyrin,

Switzerland

Ugodnosti omejene garancije HP veljajo poleg zakonskih pravic, ki ob sklenitvi kupoprodajne pogodbe izhajajo iz dveletne garancije prodajalca v primeru neskladnosti blaga, vendar lahko na izpolnjevanje pogojev za uveljavitev pravic vplivajo različni dejavniki. Omejena garancija HP nikakor ne omejuje strankinih z zakonom predpisanih pravic in ne vpliva nanje. Za dodatne informacije glejte naslednjo povezavo: Strankino pravno jamstvo ( www.hp.com/go/eu-legal ); ali pa obiščite spletno mesto evropskih središč za potrošnike

( http://ec.europa.eu/consumers/solving_consumer_disputes/non-judicial_redress/ecc-net/index_en.htm

).

Potrošniki imajo pravico izbrati, ali bodo uveljavljali pravice do storitev v skladu z omejeno garancijo HP ali proti prodajalcu v skladu z dvoletno zakonsko garancijo.

Croatia

HP ograničeno jamstvo komercijalno je dobrovoljno jamstvo koje pruža HP. Ime i adresa HP subjekta odgovornog za HP ograničeno jamstvo u vašoj državi:

Hrvatska: HP Computing and Printing d.o.o. za računalne i srodne aktivnosti, Radnička cesta 41, 10000

Zagreb

Pogodnosti HP ograničenog jamstva vrijede zajedno uz sva zakonska prava na dvogodišnje jamstvo kod bilo kojeg prodavača s obzirom na nepodudaranje robe s ugovorom o kupnji. Međutim, razni faktori mogu utjecati na vašu mogućnost ostvarivanja tih prava. HP ograničeno jamstvo ni na koji način ne utječe niti ne ograničava zakonska prava potrošača. Dodatne informacije potražite na ovoj adresi: Zakonsko jamstvo za potrošače

( www.hp.com/go/eu-legal ) ili možete posjetiti web-mjesto Europskih potrošačkih centara

( http://ec.europa.eu/consumers/solving_consumer_disputes/non-judicial_redress/ecc-net/index_en.htm

).

Potrošači imaju pravo odabrati žele li ostvariti svoja potraživanja u sklopu HP ograničenog jamstva ili pravnog jamstva prodavača u trajanju ispod dvije godine.

Latvia

HP ierobežotā garantija ir komercgarantija, kuru brīvprātīgi nodrošina HP. HP uzņēmums, kas sniedz HP ierobežotās garantijas servisa nodrošinājumu jūsu valstī:

Latvija: HP Finland Oy, PO Box 515, 02201 Espoo, Finland

114 Appendix B Service and support ENWW

HP ierobežotās garantijas priekšrocības tiek piedāvātas papildus jebkurām likumīgajām tiesībām uz pārdevēja un/vai rażotāju nodrošinātu divu gadu garantiju gadījumā, ja preces neatbilst pirkuma līgumam, tomēr šo tiesību saņemšanu var ietekmēt vairāki faktori. HP ierobežotā garantija nekādā veidā neierobežo un neietekmē patērētāju likumīgās tiesības. Lai iegūtu plašāku informāciju, izmantojiet šo saiti: Patērētāju likumīgā garantija ( www.hp.com/go/eu-legal ) vai arī Eiropas Patērētāju tiesību aizsardzības centra tīmekļa vietni ( http://ec.europa.eu/consumers/solving_consumer_disputes/non-judicial_redress/ecc-net/ index_en.htm

). Patērētājiem ir tiesības izvēlēties, vai pieprasīt servisa nodrošinājumu saskaņā ar HP ierobežoto garantiju, vai arī pārdevēja sniegto divu gadu garantiju.

Lithuania

HP ribotoji garantija yra HP savanoriškai teikiama komercinė garantija. Toliau pateikiami HP bendrovių, teikiančių HP garantiją (gamintojo garantiją) jūsų šalyje, pavadinimai ir adresai:

Lietuva: HP Finland Oy, PO Box 515, 02201 Espoo, Finland

HP ribotoji garantija papildomai taikoma kartu su bet kokiomis kitomis įstatymais nustatytomis teisėmis į pardavėjo suteikiamą dviejų metų laikotarpio garantiją dėl prekių atitikties pardavimo sutarčiai, tačiau tai, ar jums ši teisė bus suteikiama, gali priklausyti nuo įvairių aplinkybių. HP ribotoji garantija niekaip neapriboja ir neįtakoja įstatymais nustatytų vartotojo teisių. Daugiau informacijos rasite paspaudę šią nuorodą: Teisinė vartotojo garantija ( www.hp.com/go/eu-legal ) arba apsilankę Europos vartotojų centro internetinėje svetainėje ( http://ec.europa.eu/consumers/solving_consumer_disputes/non-judicial_redress/ecc-net/ index_en.htm

). Vartotojai turi teisę prašyti atlikti techninį aptarnavimą pagal HP ribotąją garantiją arba pardavėjo teikiamą dviejų metų įstatymais nustatytą garantiją.

Estonia

HP piiratud garantii on HP poolt vabatahtlikult pakutav kaubanduslik garantii. HP piiratud garantii eest vastutab HP üksus aadressil:

Eesti: HP Finland Oy, PO Box 515, 02201 Espoo, Finland

HP piiratud garantii rakendub lisaks seaduses ettenähtud müüjapoolsele kaheaastasele garantiile, juhul kui toode ei vasta müügilepingu tingimustele. Siiski võib esineda asjaolusid, mille puhul teie jaoks need õigused ei pruugi kehtida. HP piiratud garantii ei piira ega mõjuta mingil moel tarbija seadusjärgseid õigusi. Lisateavet leiate järgmiselt lingilt: tarbija õiguslik garantii ( www.hp.com/go/eu-legal ) või võite külastada Euroopa tarbijakeskuste veebisaiti ( http://ec.europa.eu/consumers/solving_consumer_disputes/nonjudicial_redress/ecc-net/index_en.htm

). Tarbijal on õigus valida, kas ta soovib kasutada HP piiratud garantiid või seadusega ette nähtud müüjapoolset kaheaastast garantiid.

Russia

Срок службы принтера для России

Срок службы данного принтера HP составляет пять лет в нормальных условиях эксплуатации. Срок службы отсчитывается с момента ввода принтера в эксплуатацию. В конце срока службы HP рекомендует посетить веб-сайт нашей службы поддержки по адресу http://www.hp.com/support и/или связаться с авторизованным поставщиком услуг HP для получения рекомендаций в отношении дальнейшего безопасного использования принтера.

ENWW HP limited warranty statement 115

HP's Premium Protection Warranty: LaserJet toner cartridge limited warranty statement

This HP product is warranted to be free from defects in materials and workmanship.

This warranty does not apply to products that (a) have been refilled, refurbished, remanufactured or tampered with in any way, (b) experience problems resulting from misuse, improper storage, or operation outside of the published environmental specifications for the printer product or (c) exhibit wear from ordinary use.

To obtain warranty service, please return the product to place of purchase (with a written description of the problem and print samples) or contact HP customer support. At HP's option, HP will either replace products that prove to be defective or refund your purchase price.

TO THE EXTENT ALLOWED BY LOCAL LAW, THE ABOVE WARRANTY IS EXCLUSIVE AND NO OTHER WARRANTY

OR CONDITION, WHETHER WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED AND HP SPECIFICALLY DISCLAIMS

ANY IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, AND FITNESS FOR

A PARTICULAR PURPOSE.

TO THE EXTENT ALLOWED BY LOCAL LAW, IN NO EVENT WILL HP OR ITS SUPPLIERS BE LIABLE FOR DIRECT,

SPECIAL, INCIDENTAL, CONSEQUENTIAL (INCLUDING LOST PROFIT OR DATA), OR OTHER DAMAGE, WHETHER

BASED IN CONTRACT, TORT, OR OTHERWISE.

THE WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO THE EXTENT LAWFULLY PERMITTED, DO

NOT EXCLUDE, RESTRICT OR MODIFY AND ARE IN ADDITION TO THE MANDATORY STATUTORY RIGHTS

APPLICABLE TO THE SALE OF THIS PRODUCT TO YOU.

116 Appendix B Service and support ENWW

HP policy on non-HP supplies

HP cannot recommend the use of non-HP toner cartridges, either new or remanufactured.

NOTE:

For HP printer products, the use of a non-HP toner cartridge or a refilled toner cartridge does not affect either the warranty to the customer or any HP support contract with the customer. However, if product failure or damage is attributable to the use of a non-HP toner cartridge or refilled toner cartridge, HP will charge its standard time and materials charges to service the product for the particular failure or damage.

ENWW HP policy on non-HP supplies 117

HP anticounterfeit Web site

Go to www.hp.com/go/anticounterfeit when you install an HP toner cartridge and the control-panel message indicates the cartridge is non-HP. HP will help determine if the cartridge is genuine and take steps to resolve the problem.

Your toner cartridge might not be a genuine HP toner cartridge if you notice the following:

The supplies status page indicates that a non-HP supply is installed.

You are experiencing a high number of problems with the cartridge.

The cartridge does not look like it usually does (for example, the packaging differs from HP packaging).

118 Appendix B Service and support ENWW

Data stored on the toner cartridge

The HP toner cartridges used with this product contain a memory chip that assists in the operation of the product.

In addition, this memory chip collects a limited set of information about the usage of the product, which might include the following: the date when the toner cartridge was first installed, the date when the toner cartridge was last used, the number of pages printed using the toner cartridge, the page coverage, the printing modes used, any printing errors that might have occurred, and the product model. This information helps HP design future products to meet our customers' printing needs.

The data collected from the toner cartridge memory chip does not contain information that can be used to identify a customer or user of the toner cartridge or their product.

HP collects a sampling of the memory chips from toner cartridges returned to HP's free return and recycling program (HP Planet Partners: www.hp.com/recycle ). The memory chips from this sampling are read and studied in order to improve future HP products. HP partners who assist in recycling this toner cartridge might have access to this data, as well.

Any third party possessing the toner cartridge might have access to the anonymous information on the memory chip.

ENWW Data stored on the toner cartridge 119

End User License Agreement

READ CAREFULLY BEFORE USING THIS SOFTWARE EQUIPMENT: This End-User license Agreement ("EULA") is a legal agreement between (a) you (either an individual or a single entity) and (b) HP Inc. ("HP") that governs your use of any Software Product, installed on or made available by HP for use with your HP product

("HP Product"), that is not otherwise subject to a separate license agreement between you and HP or its suppliers. Other software may contain a EULA in its online documentation. The term "Software Product" means computer software and may include associated media, printed materials and "online" or electronic documentation.

An amendment or addendum to this EULA may accompany the HP Product.

RIGHTS IN THE SOFTWARE PRODUCT ARE OFFERED ONLY ON THE CONDITION THAT YOU AGREE TO ALL TERMS

AND CONDITIONS OF THIS EULA. BY INSTALLING, COPYING, DOWNLOADING, OR OTHERWISE USING THE

SOFTWARE PRODUCT, YOU AGREE TO BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT ACCEPT THESE

LICENSE TERMS, YOUR SOLE REMEDY IS TO RETURN THE ENTIRE UNUSED PRODUCT (HARDWARE AND

SOFTWARE) WITHIN 14 DAYS FOR A REFUND SUBJECT TO THE REFUND POLICY OF YOUR PLACE OF PURCHASE.

1.

GRANT OF LICENSE. HP grants you the following rights provided you comply with all terms and conditions of this EULA:

a.

Use. You may use the Software Product on a single computer ("Your Computer"). If the Software

Product is provided to you via the internet and was originally licensed for use on more than one computer, you may install and use the Software Product only on those computers. You may not separate component parts of the Software Product for use on more than one computer. You do not have the right to distribute the Software Product. You may load the Software Product into

Your Computer's temporary memory (RAM) for purposes of using the Software Product.

b.

Storage. You may copy the Software Product into the local memory or storage device of the

HP Product.

c.

Copying. You may make archival or back-up copies of the Software Product, provided the copy contains all of the original Software Product's proprietary notices and that it is used only for backup purposes.

d.

Reservation of Rights. HP and its suppliers reserve all rights not expressly granted to you in this

EULA.

e.

Freeware. Notwithstanding the terms and conditions of this EULA, all or any portion of the

Software Product which constitutes non-proprietary HP software or software provided under public license by third parties ("Freeware"), is licensed to you subject to the terms and conditions of the software license agreement accompanying such Freeware whether in the form of a discrete agreement, shrink wrap license or electronic license terms accepted at time of download. Use of the Freeware by you shall be governed entirely by the terms and conditions of such license.

f.

Recovery Solution. Any software recovery solution provided with/for your HP Product, whether in the form of a hard disk drive-based solution, an external media-based recovery solution (e.g.

floppy disk, CD or DVD) or an equivalent solution delivered in any other form, may only be used for restoring the hard disk of the HP Product with/for which the recovery solution was originally

120 Appendix B Service and support ENWW

ENWW purchased. The use of any Microsoft operating system software contained in such recovery solution shall be governed by the Microsoft License Agreement.

2.

UPGRADES. To use a Software Product identified as an upgrade, you must first be licensed for the original Software Product identified by HP as eligible for the upgrade. After upgrading, you may no longer use the original Software Product that formed the basis for your upgrade eligibility. By using the

Software Product, you also agree that HP may automatically access your HP Product when connected to the internet to check the version or status of certain Software Products and may automatically download and install upgrades or updates to such Software Products on to your HP Product to provide new versions or updates required to maintain the functionality, performance, or security of the

HP Software and your HP Product and facilitate the provision of support or other services provided to you. In certain cases, and depending on the type of upgrade or update, notifications will be provided to you (via pop-up or other means), which may require you to initiate the upgrade or update.

3.

ADDITIONAL SOFTWARE. This EULA applies to updates or supplements to the original Software Product provided by HP unless HP provides other terms along with the update or supplement. In case of a conflict between such terms, the other terms will prevail.

4.

TRANSFER.

a.

Third Party. The initial user of the Software Product may make a one-time transfer of the Software

Product to another end user. Any transfer must include all component parts, media, printed materials, this EULA, and if applicable, the Certificate of Authenticity. The transfer may not be an indirect transfer, such as a consignment. Prior to the transfer, the end user receiving the transferred product must agree to all the EULA terms. Upon transfer of the Software Product, your license is automatically terminated.

b.

Restrictions. You may not rent, lease or lend the Software Product or use the Software Product for commercial timesharing or bureau use. You may not sublicense, assign or transfer the license or

Software Product except as expressly provided in this EULA.

5.

PROPRIETARY RIGHTS. All intellectual property rights in the Software Product and user documentation are owned by HP or its suppliers and are protected by law, including but not limited to United States copyright, trade secret, and trademark law, as well as other applicable laws and international treaty provisions. You shall not remove any product identification, copyright notices or proprietary restrictions from the Software Product.

6.

LIMITATION ON REVERSE ENGINEERING. You may not reverse engineer, decompile, or disassemble the

Software Product, except and only to the extent that the right to do so is mandated under applicable law notwithstanding this limitation or it is expressly provided for in this EULA.

7.

TERM. This EULA is effective unless terminated or rejected. This EULA will also terminate upon conditions set forth elsewhere in this EULA or if you fail to comply with any term or condition of this

EULA.

8.

CONSENT TO COLLECTION/USE OF DATA.

a.

HP will use cookies and other web technology tools to collect anonymous technical information related to HP Software and your HP Product. This data will be used to provide the upgrades and related support or other services described in Section 2. HP will also collect personal information including your Internet Protocol address or other unique identifier information associated with your HP Product and data provided by you on registration of your HP Product. As well as providing the upgrades and related support or other services, this data will be used for sending marketing communications to you (in each case with your express consent where required by applicable law).

To the extent permitted by applicable law, by accepting these terms and conditions you consent to the collection and use of anonymous and personal data by HP, its subsidiaries, and affiliates as

End User License Agreement 121

described in this EULA and as further described in HP’s privacy policy: www8.hp.com/us/en/ privacy/privacy.html?jumpid=reg_r1002_usen_c-001_title_r0001

b.

Collection/Use by Third Parties. Certain software programs included in your HP Product are provided and separately licensed to you by third party providers (“Third Party Software”). Third

Party Software may be installed and operational on your HP Product even if you choose not to activate/purchase such software. Third Party Software may collect and transmit technical information about your system (i.e., IP address, unique device identifier, software version installed, etc.) and other system data. This information is used by the third party to identify technical system attributes and ensure that the most current version of the software has been installed on your system. If you do not want the Third Party Software to collect this technical information or automatically send you version updates, you should uninstall the software prior to connecting to the Internet.

9.

DISCLAIMER OF WARRANTIES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, HP AND ITS

SUPPLIERS PROVIDE THE SOFTWARE PRODUCT “AS IS” AND WITH ALL FAULTS, AND HEREBY DISCLAIM

ALL OTHER WARRANTIES, GUARANTEES, AND CONDITIONS, EITHER EXPRESS, IMPLIED, OR STATUTORY,

INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF TITLE AND NON-INFRINGEMENT, ANY IMPLIED

WARRANTIES, DUTIES, GUARANTEES, OR CONDITIONS OF MERCHANTABILITY, OF SATISFACTORY

QUALITY, OF FITNESS FOR A PARTICULAR PURPOSE, AND OF LACK OF VIRUSES ALL WITH REGARD TO THE

SOFTWARE PRODUCT. Some states/jurisdictions do not allow exclusion of implied warranties or limitations on the duration of implied warranties, so the above disclaimer may not apply to you in its entirety.

IN AUSTRALIA AND NEW ZEALAND, THE SOFTWARE COMES WITH GUARANTEES THAT CANNOT BE

EXCLUDED UNDER AUSTRALIAN AND NEW ZEALAND CONSUMER LAWS. AUSTRALIAN CONSUMERS ARE

ENTITLED TO A REPLACEMENT OR A REFUND FOR A MAJOR FAILURE AND COMPENSATION FOR OTHER

REASONABLY FORESEEABLE LOSS OR DAMAGE. AUSTRALIAN CONSUMERS ARE ALSO ENTITLED TO HAVE

THE SOFTWARE REPAIRED OR REPLACED IF IT FAILS TO BE OF ACCEPTABLE QUALITY AND THE FAILURE

DOES NOT AMOUNT TO A MAJOR FAILURE. NEW ZEALAND CONSUMERS WHO ARE PURCHASING GOODS

FOR PERSONAL, DOMESTIC OR HOUSEHOLD USE OR CONSUMPTION AND NOT FOR THE PURPOSE OF A

BUSINESS (“NEW ZEALAND CONSUMERS”) ARE ENTITLED TO REPAIR, REPLACEMENT OR REFUND FOR A

FAILURE AND COMPENSATION FOR OTHER REASONABLY FORESEEABLE LOSS OR DAMAGE.

10.

LIMITATION OF LIABILITY. Subject to local law, notwithstanding any damages that you might incur, the entire liability of HP and any of its suppliers under any provision of this EULA and your exclusive remedy for all of the foregoing shall be limited to the greater of the amount actually paid by you separately for the Software Product or U.S. $5.00. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO

EVENT SHALL HP OR ITS SUPPLIERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR

CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF

PROFITS OR CONFIDENTIAL OR OTHER INFORMATION, FOR BUSINESS INTERRUPTION, FOR PERSONAL

INJURY, FOR LOSS OF PRIVACY ARISING OUT OF OR IN ANY WAY RELATED TO THE USE OF OR INABILITY TO

USE THE SOFTWARE PRODUCT, OR OTHERWISE IN CONNECTION WITH ANY PROVISION OF THIS EULA,

EVEN IF HP OR ANY SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES AND EVEN IF

THE REMEDY FAILS OF ITS ESSENTIAL PURPOSE. Some states/jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

11.

U.S. GOVERNMENT CUSTOMERS. Consistent with FAR 12.211 and 12.212, Commercial Computer

Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under HP's standard commercial license.

12.

COMPLIANCE WITH EXPORT LAWS. You shall comply with all laws and regulations of the United States and other countries ("Export Laws") to assure that the Software Product is not (1) exported, directly or indirectly, in violation of Export Laws, or (2) used for any purpose prohibited by Export Laws, including, without limitation, nuclear, chemical, or biological weapons proliferation.

122 Appendix B Service and support ENWW

13.

CAPACITY AND AUTHORITY TO CONTRACT. You represent that you are of the legal age of majority in your state of residence and, if applicable, you are duly authorized by your employer to enter into this contract.

14.

APPLICABLE LAW. This EULA is governed by the laws of the country in which the equipment was purchased.

15.

ENTIRE AGREEMENT. This EULA (including any addendum or amendment to this EULA which is included with the HP Product) is the entire agreement between you and HP relating to the Software Product and it supersedes all prior or contemporaneous oral or written communications, proposals and representations with respect to the Software Product or any other subject matter covered by this EULA.

To the extent the terms of any HP policies or programs for support services conflict with the terms of this EULA, the terms of this EULA shall control.

© Copyright 2015 HP Development Company, L.P.

The information contained herein is subject to change without notice. All other product names mentioned herein may be trademarks of their respective companies. To the extent permitted by applicable law, the only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. To the extent permitted by applicable law, HP shall not be liable for technical or editorial errors or omissions contained herein.

First Edition: August 2015

ENWW End User License Agreement 123

Customer self-repair warranty service

HP products are designed with many Customer Self Repair (CSR) parts to minimize repair time and allow for greater flexibility in performing defective parts replacement. If during the diagnosis period, HP identifies that the repair can be accomplished by the use of a CSR part, HP will ship that part directly to you for replacement.

There are two categories of CSR parts: 1) Parts for which customer self repair is mandatory. If you request HP to replace these parts, you will be charged for the travel and labor costs of this service. 2) Parts for which customer self repair is optional. These parts are also designed for Customer Self Repair. If, however, you require that HP replace them for you, this may be done at no additional charge under the type of warranty service designated for your product.

Based on availability and where geography permits, CSR parts will be shipped for next business day delivery.

Same-day or four-hour delivery may be offered at an additional charge where geography permits. If assistance is required, you can call the HP Technical Support Center and a technician will help you over the phone. HP specifies in the materials shipped with a replacement CSR part whether a defective part must be returned to HP. In cases where it is required to return the defective part to HP, you must ship the defective part back to HP within a defined period of time, normally five (5) business days. The defective part must be returned with the associated documentation in the provided shipping material. Failure to return the defective part may result in HP billing you for the replacement. With a customer self repair, HP will pay all shipping and part return costs and determine the courier/carrier to be used.

124 Appendix B Service and support ENWW

Customer support

Get telephone support for your country/region

Have the product name, serial number, date of purchase, and problem description ready.

Get 24-hour Internet support, and download software utilities and drivers

Order additional HP service or maintenance agreements

Register your product

Country/region phone numbers are on the flyer that was in the box with your product or at www.hp.com/support/ .

www.hp.com/support/ljm1005 www.hp.com/go/carepack www.register.hp.com

ENWW Customer support 125

126 Appendix B Service and support ENWW

C Device specifications

This section contains the following information about the device:

Physical specifications

Electrical specifications

Power consumption

Environmental specifications

Acoustic emissions

ENWW 127

Physical specifications

Table C-1 Physical specifications

Height Depth Width

1

308 mm (12.13 inches) 363 mm (14.3 inches) 437 mm (17.2 inches)

Weight does not include print cartridge, which weighs 0.7 kg (1.5 lb).

Weight

1

8.3 kg (18.4 lb)

Electrical specifications

CAUTION:

Power requirements are based on the country/region where the device is sold. Do not convert operating voltages. This will damage the device and void the product warranty.

Table C-2 Electrical specifications

Item

Power requirements

Rated current

110-volt models

110 to 127 V (+/- 10%)

XX / XX Hz (+/- 2 Hz)

X.X A

220-volt models

220 to 240 V (+/- 10%)

XX / XX Hz (+/- 2 Hz)

X.X A

Power consumption

Table C-3

Power consumption (average, in watts)

1

,

2

Printing Copying Ready/Sleep

3

Off

4

5

1

2

3

XXX W XXX W X W 0 W

Values are based on preliminary data. See www.hp.com/support/ljm1005 for current information.

Power reported is highest values measured for monochrome printing/copying using all standard voltages.

The default time from Ready mode to Sleep mode and the recovery time from Sleep mode to start of printing is less than 10 seconds because of instant-on fusing.

Maximum heat dissipation for all models in Ready mode = 51.2 BTU/hour.

Print speed is 15 ppm letter-size and 14 ppm A4-size.

Environmental specifications

Table C-4 Environmental specifications

(Device and print cartridge)

Recommended

1

XX° to XX°C

Operating 1

XX° to XX.X°C

Temperature (XX° to XX°F) (XX° to XX.X°F)

1

Relative humidity XX% to XX% XX% to XX%

Values are subject to change. See the support Web site for current information.

Storage 1

X° to XX°C

(XX° to XXX°F)

X% or less

128 Appendix C Device specifications ENWW

Acoustic emissions

Table C-5

Acoustic emissions

1

,

2

Sound Power Level

Printing (15 ppm)

3

Ready

Sound Pressure Level - Bystander Position

Printing (15 ppm)

3

Declared per ISO 9296

L

WAd

= X.X Bels (A) [XX dB (A)]

Essentially Inaudible

Declared per ISO 9296

L pAm

= XX dB (A)

1

2

3

Ready Essentially Inaudible

Values are based on preliminary data. See www.hp.com/support/ljm1005 for current information.

Configuration tested: HP LaserJet M1005 MFP, letter.

Print speed is 15 ppm letter-size and 14 ppm A4-size.

ENWW Acoustic emissions 129

130 Appendix C Device specifications ENWW

D Environmental product stewardship program

ENWW

Protecting the environment

Ozone production

Power consumption

Toner consumption

Paper use

Plastics

HP LaserJet print supplies

Paper

Material restrictions

Disposal of waste equipment by users (EU and India)

Electronic hardware recycling

Brazil hardware recycling information

Chemical substances

Product Power Data per European Union Commission Regulation 1275/2008

Restriction on Hazardous Substances statement (India)

Restriction on Hazardous Substances statement (Turkey)

Restriction on Hazardous Substances statement (Ukraine)

Substances Table (China)

SEPA Ecolabel User Information (China)

The regulation of the implementation on China energy label for printer, fax, and copier

Material Safety Data Sheet (MSDS)

EPEAT

For more information

131

Protecting the environment

HP is committed to providing quality products in an environmentally sound manner. This product has been designed with several attributes to minimize impacts on our environment.

Ozone production

The airborne emissions of ozone for this product has been measured according to a generally recognized method* and when these emissions data are applied to a “generic office model exposure scenario”**, HP is able to determine there is no appreciable amount of ozone generated during printing that exceeds any current indoor air quality standards or guidelines.

* Test method for the determination of emissions from hardcopy devices with respect to awarding the environmental label for office devices with printing function; RAL-UZ 171 – BAM July, 2012

** Based on ozone concentration when printing 2 hours per day in a 32 cubic meter room with a ventilation rate of 0.72 air changes per hour with HP printing supplies

Power consumption

Power usage drops significantly while in Ready, Sleep, or Off mode, which saves natural resources and saves money without affecting the high performance of this product. HP printing and imaging equipment marked with the ENERGY STAR products:

® logo is qualified to the U.S. Environmental Protection Agency's ENERGY STAR specifications for imaging equipment. The following mark will appear on ENERGY STAR qualified imaging

Additional ENERGY STAR qualified imaging product model information is listed at: www.hp.com/go/energystar

Toner consumption

EconoMode uses less toner, which might extend the life of the print cartridge. HP does not recommend the full-time use of EconoMode. If EconoMode is used full-time, the toner supply might outlast the mechanical parts in the print cartridge. If print quality begins to degrade and is no longer acceptable, consider replacing the print cartridge.

132 Appendix D Environmental product stewardship program ENWW

Paper use

This product’s duplex feature (manual or automatic) and N-up printing (multiple pages printed on one page) capability can reduce paper usage and the resulting demands on natural resources.

Plastics

Plastic parts over 25 grams are marked according to international standards that enhance the ability to identify plastics for recycling purposes at the end of the product’s life.

HP LaserJet print supplies

Original HP Supplies were designed with the environment in mind. HP makes it easy to conserve resources and paper when printing. And when you are done, we make it easy and free to recycle.

1

All HP cartridges returned to HP Planet Partners go through a multiphase recycling process where materials are separated and refined for use as raw material in new Original HP cartridges and everyday products. No

Original HP cartridges returned through HP Planet Partners are ever sent to a landfill, and HP never refills or resells Original HP cartridges.

To participate in HP Planet Partners return and recycling program, visit www.hp.com/recycle

. Select your country/region for information on how to return HP printing supplies. Multi-lingual program information and instructions are also included in every new HP LaserJet print cartridge package.

1 Program availability varies. For more information, visit www.hp.com/recycle .

Paper

This product is capable of using recycled paper and lightweight paper (EcoFFICIENT™) when the paper meets the guidelines outlined in the HP LaserJet Printer Family Print Media Guide. This product is suitable for the use of recycled paper and lightweight paper (EcoFFICIENT™) according to EN12281:2002.

Material restrictions

This HP product does not contain added mercury.

This HP product does not contain a battery.

Disposal of waste equipment by users (EU and India)

This symbol means do not dispose of your product with your other household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment. For more information, please contact your household waste disposal service, or go to: www.hp.com/recycle .

ENWW Paper use 133

Electronic hardware recycling

HP encourages customers to recycle used electronic hardware. For more information about recycling programs go to: www.hp.com/recycle .

Brazil hardware recycling information

Este produto eletrônico e seus componentes não devem ser descartados no lixo comum, pois embora estejam em conformidade com padrões mundiais de restrição a substâncias nocivas, podem conter, ainda que em quantidades mínimas, substâncias impactantes ao meio ambiente. Ao final da vida útil deste produto, o usuário deverá entregá-lo à HP. A não observância dessa orientação sujeitará o infrator às sanções previstas em lei.

Após o uso, as pilhas e/ou baterias dos produtos HP deverão ser entregues ao estabelecimento comercial ou rede de assistência técnica autorizada pela HP.

Para maiores informações, inclusive sobre os pontos de recebimento, acesse: www.hp.com.br/reciclar

Chemical substances

HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European

Parliament and the Council). A chemical information report for this product can be found at: www.hp.com/go/ reach .

Product Power Data per European Union Commission Regulation

1275/2008

For product power data, including the power consumption of the product in networked standby if all wired network ports are connected and all wireless network ports are activated, please refer to section P14

‘Additional Information’ of the product IT ECO Declaration at www.hp.com/hpinfo/globalcitizenship/ environment/productdata/itecodesktop-pc.html

.

Restriction on Hazardous Substances statement (India)

Restriction on Hazardous Substances statement (Turkey)

Türkiye Cumhuriyeti: EEE Yönetmeliğine Uygundur

134 Appendix D Environmental product stewardship program ENWW

Restriction on Hazardous Substances statement (Ukraine)

Обладнання відповідає вимогам Технічного регламенту щодо обмеження використання деяких небезпечних речовин в електричному та електронному обладнанні, затвердженого постановою

Кабінету Міністрів України від 3 грудня 2008 № 1057

Substances Table (China)

SEPA Ecolabel User Information (China)

中国

环境标识认证产品用户说明

噪声大于

63.0 dB(A)的办公设备不宜放置于办公室内,请在独立的隔离区域使用。

如需

长时间使用本产品或打印大量文件,请确保在通风良好的房间内使用。

如您需要确

认本产品处于零能耗状态,请按下电源关闭按钮,并将插头从电源插座断开。

您可以使用再生

纸,以减少资源耗费。

ENWW Restriction on Hazardous Substances statement (Ukraine) 135

The regulation of the implementation on China energy label for printer, fax, and copier

Material Safety Data Sheet (MSDS)

Material Safety Data Sheets (MSDS) for supplies containing chemical substances (for example, toner) can be obtained by accessing the HP Web site at www.hp.com/go/msds .

EPEAT

Many HP products are designed to meet EPEAT. EPEAT is a comprehensive environmental rating that helps identify greener electronics equipment. For more information on EPEAT go to www.epeat.net

. For information on HP's EPEAT registered products go to www.hp.com/hpinfo/globalcitizenship/environment/ pdf/epeat_printers.pdf

.

For more information

To obtain information about these environmental topics:

Product environmental profile sheet for this and many related HP products

HP’s commitment to the environment

HP’s environmental management system

HP’s end-of-life product return and recycling program

Material Safety Data Sheets

Visit www.hp.com/go/environment .

Also, visit www.hp.com/recycle .

136 Appendix D Environmental product stewardship program ENWW

E Regulatory information

This section contains the following regulatory information:

Declaration of conformity

Regulatory statements

ENWW 137

Declaration of conformity

Safety:

EMC:

Manufacturer's Name:

Manufacturer's Address:

Product Names:

Regulatory Model Number

Print Cartridge

Product Options:

3)

Declaration of Conformity according to ISO/IEC Guide 22 and EN 45014

HP Company

11311 Chinden Boulevard

Boise, Idaho 83714-1021, USA declares, that the product

HP LaserJet M1005 MFP series

BOISB-0207-01

Q2612A

ALL conforms to the following Product Specifications:

IEC 60950-1:2001 / EN60950-1: 2001 +A11

IEC 60825-1:1993 +A1 +A2

EN 60825-1:1994 +A1 +A2 (Class 1 Laser/LED Product)

GB4943-2001

CISPR22:2003 +A1 / EN55022:2005 - Class B 1)

EN 61000-3-2:2000

EN 61000-3-3:1995 +A1

EN 55024:1998 +A1 +A2

FCC Title 47 CFR, Part 15 Class B 2) / ICES-003, Issue 4

GB9254-1998, GB17625.1-2003

Supplementary Information:

The product herewith complies with the requirements of the EMC Directive 89/336/EEC and the Low Voltage Directive 73/23/EEC, and carries the CE-

Marking accordingly.

1) The product was tested in a typical configuration with HP Personal Computer Systems.

2) This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

3) For regulatory purposes, this product is assigned a Regulatory model number. This number should not be confused with the marketing name or the product number(s).

Boise, Idaho 83713, USA

Australia Contact:

January 1, 2006

For regulatory topics only:

Product Regulations Manager, HP Australia Ltd., 31-41 Joseph Street, Blackburn, Victoria 3130, Australia

138 Appendix E Regulatory information ENWW

European Contact:

USA Contact:

Declaration of Conformity according to ISO/IEC Guide 22 and EN 45014

Your Local HP Sales and Service Office or HP GmbH, Department HQ-TRE / Standards Europe, Herrenberger Strasse 140,

Böblingen, D-71034, Germany, (FAX: +49-7031-14-3143)

Product Regulations Manager, HP Company, PO Box 15, Mail Stop 160, Boise, Idaho 83707-0015, USA, (Phone:

208-396-6000)

ENWW Declaration of conformity 139

Regulatory statements

FCC regulations

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If this equipment is not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase separation between equipment and receiver.

Connect equipment to an outlet on a circuit different from that to which the receiver is located.

Consult your dealer or an experienced radio/TV technician.

NOTE:

Any changes or modifications to the printer that are not expressly approved by HP could void the user’s authority to operate this equipment.

Use of a shielded interface cable is required to comply with the Class B limits of Part 15 of FCC rules.

Canada - Industry Canada ICES-003 Compliance Statement

CAN ICES-3(B)/NMB-3(B)

EMC statement (Korea)

Power cord instructions

Make sure your power source is adequate for the product voltage rating. The voltage rating is on the product label. The product uses either 110-127 Vac or 220-240 Vac and 50/60 Hz.

Connect the power cord between the product and a grounded AC outlet.

CAUTION:

To prevent damage to the product, use only the power cord that is provided with the product.

Laser safety

The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration has implemented regulations for laser products manufactured since August 1, 1976. Compliance is mandatory for products marketed in the United States. The device is certified as a “Class 1” laser product under the U.S.

Department of Health and Human Services (DHHS) Radiation Performance Standard according to the

Radiation Control for Health and Safety Act of 1968. Since radiation emitted inside the device is completely

140 Appendix E Regulatory information ENWW

confined within protective housings and external covers, the laser beam cannot escape during any phase of normal user operation.

WARNING!

Using controls, making adjustments, or performing procedures other than those specified in this user guide may result in exposure to hazardous radiation.

Laser statement for Finland

Luokan 1 laserlaite

Klass 1 Laser Apparat

HP LaserJet M1005 MFP, laserkirjoitin on käyttäjän kannalta turvallinen luokan 1 laserlaite. Normaalissa käytössä kirjoittimen suojakotelointi estää lasersäteen pääsyn laitteen ulkopuolelle. Laitteen turvallisuusluokka on määritetty standardin EN 60825-1 (2007) mukaisesti.

VAROITUS !

Laitteen käyttäminen muulla kuin käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle.

VARNING !

Om apparaten används på annat sätt än i bruksanvisning specificerats, kan användaren utsättas för osynlig laserstrålning, som överskrider gränsen för laserklass 1.

HUOLTO

HP LaserJet M1005 MFP - kirjoittimen sisällä ei ole käyttäjän huollettavissa olevia kohteita. Laitteen saa avata ja huoltaa ainoastaan sen huoltamiseen koulutettu henkilö. Tällaiseksi huoltotoimenpiteeksi ei katsota väriainekasetin vaihtamista, paperiradan puhdistusta tai muita käyttäjän käsikirjassa lueteltuja, käyttäjän tehtäväksi tarkoitettuja ylläpitotoimia, jotka voidaan suorittaa ilman erikoistyökaluja.

VARO !

Mikäli kirjoittimen suojakotelo avataan, olet alttiina näkymättömällelasersäteilylle laitteen ollessa toiminnassa. Älä katso säteeseen.

VARNING !

Om laserprinterns skyddshölje öppnas då apparaten är i funktion, utsättas användaren för osynlig laserstrålning. Betrakta ej strålen.

Tiedot laitteessa käytettävän laserdiodin säteilyominaisuuksista: Aallonpituus 775-795 nm Teho 5 m W

Luokan 3B laser.

ENWW Regulatory statements 141

GS statement (Germany)

Das Gerät ist nicht für die Benutzung im unmittelbaren Gesichtsfeld am Bildschirmarbeitsplatz vorgesehen.

Um störende Reflexionen am Bildschirmarbeitsplatz zu vermeiden, darf dieses Produkt nicht im unmittelbaren Gesichtsfeld platziert werden.

Das Gerät ist kein Bildschirmarbeitsplatz gemäß BildscharbV. Bei ungünstigen Lichtverhältnissen (z. B.

direkte Sonneneinstrahlung) kann es zu Reflexionen auf dem Display und damit zu Einschränkungen der

Lesbarkeit der dargestellten Zeichen kommen.

Eurasian Conformity (Belarus, Kazakhstan, Russia)

142 Appendix E Regulatory information ENWW

Glossary

browser

Short for Web browser, a software program that is used to locate and open Web pages.

contrast

The difference between the dark and light areas of an image. The lower the number value, the more closely the shades resemble each other. The higher the number, the more the shades appear separate from each other.

dots per inch (dpi)

A measurement of resolution that is used for printing. Generally, more dots per inch result in a higher resolution, more visible detail in the image, and a larger file size.

e-mail (electronic mail)

An abbreviation for electronic mail. Software that can be used to electronically transmit items over a communications network.

file format

The way the contents of a file are structured by a program or group of programs.

grayscale

Shades of gray that represent light and dark portions of an image when color images are converted to grayscale; colors are represented by various shades of gray.

halftone

An image type that simulates grayscale by varying the number of dots. Highly colored areas consist of a large number of dots, while lighter areas consist of a smaller number of dots.

link

A connection to a program or device that can be used to send information from the device software to other programs, such as e-mail or OCR links.

optical character recognition (OCR) software

OCR software converts an electronic image of text, such as a scanned document, into a form that word processor, spreadsheet, and database programs can use.

pixels per inch (ppi)

A measurement of resolution that is used for scanning. Generally, more pixels per inch result in a higher resolution, more visible detail in the image, and a larger file size.

printer driver

A printer driver is a program that software programs use to gain access to device features. A printer driver translates software program formatting commands (such as page breaks and font selection) into a printer language, and then sends the print file to the device.

ENWW Glossary 143

Readiris

An optical character recognition (OCR) program that was developed by I.R.I.S. and that is included with the device software.

resolution

The sharpness of an image, measured in dots per inch (dpi). The higher the dpi, the greater the resolution.

surge protector

A device that protects a power supply and communications lines from electrical surges.

TWAIN

An industry standard for scanners and software. By using a TWAIN-compliant scanner with a TWAIN-compliant program, a scan can be initiated from within the program.

URL

Uniform resource locator, the global address of documents and resources on the Internet. The first part of the address indicates what protocol to use, the second part specifies the IP address or the domain name where the resource is located.

USB

Universal serial bus (USB) is a standard that was developed by the USB Implementers Forum, Inc., to connect computers and peripherals. USB is designed to concurrently connect a single computer USB port to multiple peripherals.

watermarks

A watermark adds background text to a document that is being printed. For example, “Confidential” can be printed in the background text of a document to indicate that the document is confidential. A selection can be made from a set of predefined watermarks, and the font, size, angle, and style can be changed. The printer can place the watermark on the first page only or all pages.

WIA

Windows Imaging Architecture (WIA) is an imaging architecture that is available in Windows Me and Windows XP. A scan can be initiated from within these operating systems by using a WIA-compliant scanner.

144 Glossary ENWW

Index

Symbols/Numerics

600 dpi print-quality setting 83

A

accessibility features 2

accessories

part numbers 102

acoustic emissions 129

alert messages 80

anticounterfeit supplies 118

Apple Macintosh. See Macintosh

archive print 38

B

background, gray 85 bands, troubleshooting 85

batteries included 133

bin, output

capacity 2

jams, clearing 78

locating 3

black and white scanning 62

blank copies, troubleshooting 94

blank pages

adding to printouts 32

troubleshoooting 90

blank scans, troubleshooting 96

books

copying 52

scanning 59

both sides, copying 50

both sides, printing on

Macintosh 37

Windows 33

buttons, control panel 4

C

cables

part numbers 102

USB, troubleshooting 90

canceling

copy jobs 42

print jobs 39

scan jobs 57

capacity

output bin 2

priority input slot 21 tray 1 21 trays 21

card stock

guidelines for using 19

printing on 17

priority input tray, loading 24

specifications 21

cartridge-door release, locating 3

cartridges

HP fraud hotline 66

non-HP 117

part numbers 102

recycling 65, 133

replacing 69

reusing 65 status, checking 65

storing 65, 128

warranty 116

characters, troubleshooting 86

cleaning

exterior 67 glass 67 lid backing 67

cleaning page, printing 68

color, scanning settings 61, 62

colored paper, specifications 17

Configuration report 64

contrast settings, copy 44

control panel

buttons 4

display, troubleshooting 97

language, selecting 27

locating 3

messages, troubleshooting 80

copying

books 52

canceling 42

contrast, adjusting 44

enlarging 45

media settings 48

media, troubleshooting 92

multiple pages per sheet 46

number of copies 47

photos 52

quality, adjusting 42

quality, troubleshooting 91

reducing 45

size, troubleshooting 94

starting a job 42

troubleshooting 94

two-sided documents 50

viewing settings 53

counterfeit supplies 118

covers, document

Macintosh 36

paper specifications 21

Windows settings 32

creases, troubleshooting 87

crooked pages 87, 89

curled media 87, 100

custom paper sizes

driver settings 32

printing on 17

customer support

online 125

ENWW Index 145

D

dark copying 92

darkness settings, copy 44

declaration of conformity 138

default media size and type,

setting 27

defaults, restoring 100

Demo page, printing 64

dimensions, device 128

disposal, end-of-life 133

dots per inch (dpi)

print settings 83

specifications 2

dots, troubleshooting 85

double-sided copying 50

double-sided printing

Macintosh 37

Windows 33

dpi (dots per inch)

print settings 83

specifications 2

drivers

help, Windows 8

Macintosh settings 35

Macintosh, troubleshooting 98

presets (Macintosh) 35

quick sets (Windows) 30

settings, changing 9

supported 8

system requirements 6

Windows settings 30

dropouts, troubleshooting 85

duplexing

Macintosh 37

Windows 33

E

e-mail, resolution settings for 62

electrical specifications 128

electronic hardware recycling 134

end-of-life disposal 133

Energy Star compliance 2

enlarging documents

copying 45

printing 31

envelopes

guidelines for using 18

priority input tray, loading 24

storing 19

tray capacity 21

environmental specifications

device 128

paper 22

environmental stewardship

program 131

EPS files, troubleshooting 98

error messages

control panel 80

critical 81

Eurasian conformity 142

F

factory-set defaults, restoring 100

faded print 84

FastRes 2 features 2

feeding problems, troubleshooting

89

Finnish laser safety statement 141

first page

blank 32

Macintosh settings 36

Windows settings 32

flatbed scanner

cleaning 67

loading 24

fraud hotline 66

fraud Web site 118

G

glass, cleaning 67

glossary of terms 143

gray background, troubleshooting

85

grayscale scanning 62

H

hardware recycling, Brazil 134

heavy paper

guidelines for using 19

printing on 17

priority input tray, loading 24

specifications 21

help, Windows printer drivers 8

HP Customer Care 125

HP fraud hotline 66

HP fraud Web site 118

HP LaserJet Scan (Windows) 57

humidity specifications

device environment 128

paper, storing 22

I

image quality

cleaning page, printing 68

copy, troubleshooting 91

print, troubleshooting 83, 84

scans, troubleshooting 95, 96

information pages

Configuration 64

Demo 64

language, selecting 27

Menu structure 64

ink cartridges. See print cartridges input trays. See trays installation, software

Macintosh 11

programs included 7

interface ports

cables, ordering 102

troubleshooting Macintosh 98

types included 2

J

jams

causes of 74

input tray, clearing 76

locating 75

output bins, clearing 78

preventing 74

print-cartridge area, clearing 78

K

keys, control panel 4

Korean EMC statement 140

L

labels

guidelines for using 17

tray capacity 21

language, control panel display 27

laser safety statements 140, 141

LaserJet Scan (Windows) 57

last page, blank 32

letterhead 20

license, software 120

lid, cleaning 67

light copying 92

light print, troubleshooting 84

lightness, copy contrast setting 44

lines, troubleshooting 85

copies 91

146 Index ENWW

printed pages 85

scans 96

loading

input trays 24 originals on flatbed scanner 24 priority input tray 24

tray 1 25

loose toner, troubleshooting 86

M

Macintosh

driver settings 9, 35

driver supported 8

drivers, troubleshooting 98

installing software 11

problems, solving 98

scanning from TWAIN-compliant

software 58

special media, printing on 38

supported operating systems 6

uninstalling software 11

USB card, troubleshooting 98

material restrictions 133

Material Safety Data Sheet (MSDS)

136

media

colored paper 17

copy settings 48

curled 100

curled, troubleshooting 87

custom sizes, setting 32

custom-sized, printing on 17

default size, changing 27

document size, selecting 31

first page, Macintosh settings

36

first page, Windows settings 32

HP, part numbers 102

jams 74

loading input trays 24

pages per sheet, copying 46

pages per sheet, Macintosh 36

pages per sheet, Windows 32

priority input tray 24

recommended 14 selecting 14

special, Macintosh settings 38

specifications 21

tray selection 26

troubleshooting 16, 88

types to avoid 14

wrinkled 87

memory

specifications 2

memory chip, toner cartridge

description 119

Menu structure, printing 64

mercury-free product 133

messages

control panel 80

critical 81

Microsoft Windows. See Windows multiple pages per sheet

copying 46

Macintosh 36

Windows 32

N

n-up copying 46

n-up printing

Macintosh 36

Windows 32

noise specifications 129

non-HP supplies 117

number of copies, changing 47

O

OCR software 60

on/off switch, locating 3

online help, Windows printer

drivers 8

online support 125

operating environment,

specifications 128

operating systems supported 6, 8

optical character recognition

software 60

options. See settings ordering supplies and accessories

102

originals, loading 24

output bin

capacity 2

jams, clearing 78

locating 3

output quality

cleaning page, printing 68

copy, troubleshooting 91

print, troubleshooting 83, 84

scans, troubleshooting 95, 96

P

Page Setup 26

pages

blank 90 not printing 90

skewed 87, 89

pages per minute 2

pages per sheet

Macintosh 36

WIndows 32

paper

colored 17

copy settings 48

curled, troubleshooting 87, 100

custom sizes, setting 32

custom-sized, printing on 17

default size, changing 27

document size, selecting 31

first page, Macintosh settings

36

first page, Windows settings 32

HP, part numbers 102

jams 74

loading input trays 24

pages per sheet, copying 46

pages per sheet, Macintosh 36

pages per sheet, Windows 32

priority input tray 24

recommended 14 selecting 14

special media, Macintosh

settings 38

specifications 21

tray selection 26

troubleshooting 16, 88

types to avoid 14

wrinkled 87

paper path, cleaning 68

part numbers

cables 102 media 102 supplies 102 user-replaceable parts 102 parts, user-replaceable 102

phone numbers

HP fraud hotline 66

photos

copying 52

scanning 59

scanning, troubleshooting 95

ENWW Index 147

physical specifications 128

pick-up rollers, ordering 102

pixels per inch (ppi), scanning

resolution 61

ports

cables, ordering 102

troubleshooting Macintosh 98

types included 2

power

requirements 128

troubleshooting 72

power consumption 128

power switch, locating 3

ppi (pixels per inch), scanning

resolution 61

preprinted paper 20

presets (Macintosh drivers) 35

print cartridge area jams, clearing

78

print cartridges

door release, locating 3

HP fraud hotline 66

part numbers 102

recycling 65

replacing 69

reusing 65 status, checking 65

storing 65, 128

Print dialog box 26

Print Document On 31

print jobs, canceling 39

print media. See media print quality

cleaning page, printing 68

settings 83

troubleshooting 83, 84

printer drivers

help, Windows 8

Macintosh settings 35

Macintosh, troubleshooting 98

presets (Macintosh) 35

quick sets (Windows) 30

settings, changing 9

supported 8

system requirements 6

Windows settings 30

printing

blank pages, adding 32

both sides, Macintosh 37

both sides, Windows 33

canceling 39

cover pages, Macintosh 36

covers, Windows 32 custom paper sizes 32

custom-size media 17

multiple pages per sheet,

Macintosh 36

multiple pages per sheet,

Windows 32

presets, Macintosh 35

quick sets, Windows 30

resizing documents 31

settings, changing 26 tray selection 26

troubleshooting 90

watermarks, Windows 31

priority input slot

loading 24

locating 3

paper specifications 21

problem solving. See troubleshooting

Q

quality

cleaning page, printing 68

copy settings 42

copy, troubleshooting 91

print settings 83

print, troubleshooting 83, 84

scans, troubleshooting 95, 96

quick sets (Windows drivers) 30

R

Readiris OCR software 60

recycling 133

electronic hardware 134

recycling supplies 65 redistribute toner 65

reducing documents

copying 45

printing 31

repair. See service repetitive defects, troubleshooting

86, 88

replacing print cartridges 69

reports

Configuration report 64

Demo page 64

language, selecting 27

Menu structure 64

resizing documents

copying 45

printing 31

resolution

features 2

print settings 83

scanning 61

specifications 2

restoring factory-set defaults 100

rollers, ordering 102

S

safety statements 140, 141

saving driver settings

Macintosh presets 35

Windows quick sets 30

scaling documents

copying 45

printing 31

scanner glass, cleaning 67

scanning

black and white 62

blank pages, troubleshooting

96

books 59

canceling 57

color 61

grayscale 62

HP LaserJet Scan (Windows) 57

loading originals on flatbed

scanner 24

methods 56

OCR software 60

photos 59

quality, troubleshooting 95, 96

resolution 61

speed, troubleshooting 95

TWAIN-compliant software 58

WIA-compliant software 58

scatter, troubleshooting 88

separation pad, ordering 102

serial number, product 64

service

critical error messages 81

part numbers 102

settings

changing 9

Configuration report 64

factory-set defaults, restoring

100

148 Index ENWW

presets (Macintosh drivers) 35

print jobs 26

quick sets (Windows drivers) 30

size, copy

reducing or enlarging 45

troubleshooting 94

size, device 128

sizes, media

default, changing 27

selecting trays by 26

supported 21

skewed pages 87, 89

slow speed, troubleshooting

printing 90

scanning 95

smeared toner, troubleshooting 86

software

included 7

Macintosh, installing 11

Readiris OCR 60

scanning from TWAIN or WIA 58

settings, changing 9

software license agreement 120

supported operating systems 6 system requirements 6

uninstalling on Macintosh 11

uninstalling on Windows 10

source, printing by 26

special media

Macintosh settings 38

specifications 17

specifications

acoustic emissions 129

electrical 128 environmental 128

features 2

paper 21

physical 128

specks, troubleshooting 85

speed

print specifications 2

printing, troubleshooting 90

scanning, troubleshooting 95

spots, troubleshooting 85

status, supplies 65

stopping printing 39

storing

device 128

envelopes 19

paper 22

print cartridges 65

streaks, troubleshooting 85

supplies

counterfeit 118

HP fraud hotline 66

non-HP 117

recycling 65, 133

reusing 65 status, checking 65 storing 65

support

online 125

system requirements 6

T

technical support

online 125

telephone numbers

HP fraud hotline 66

temperature specifications

device environment 128

paper, storing 22

terminology 143

text, troubleshooting 86

toner

cleaning page, printing 68

loose, troubleshooting 86

scatter, troubleshooting 88

smeared, troubleshooting 86

specks, troubleshooting 85

toner cartridges

memory chips 119

non-HP 117

recycling 133

warranty 116

transparencies

guidelines for using 17

priority input tray, loading 24

tray capacity 21

tray 1

loading media 25

loading paper 24

locating 3

paper specifications 21

trays

capacities 2

Configuration report 64

feeding problems,

troubleshooting 89

jams, clearing 76

loading 24 loading paper 24

locating 3

paper specifications 21

selecting 26

troubleshooting

blank pages 90

blank scans 96

checklist 72

cleaning page 68

control panel display problems

97

control panel messages 80

copy quality 91

copy size 94 copying 94

critical error messages 81

curled media 87, 100

EPS files 98

faded print 84

feeding problems 89

jams 74

lines, copies 91

lines, printed pages 85

lines, scans 96

loose toner 86

Macintosh problems 98

pages not printing 90

paper 16, 88

print quality 83

repetitive defects 86, 88

scan quality 95, 96

skewed pages 87, 89

text 86

toner scatter 88

toner smear 86

toner specks 85

USB cables 90

wrinkles 87

TWAIN-compliant software, scanning

from 58

two-sided copying 50

two-sided printing

Macintosh 37

Windows 33

types, media

default, changing 27

selecting trays by 26

specifications 21

ENWW Index 149

U

uninstalling Macintosh software 11

uninstalling Windows software 10

USB port

locating 3

troubleshooting connection 90

troubleshooting Macintosh 98

type included 2

Use Different Paper/Covers 32

user-replaceable parts 102

V

vertical lines, troubleshooting 85

vertical white or faded stripes 91

voltage requirements 128

W

warning messages 80

warranty

customer self repair 124

license 120

product 106

toner cartridges 116

waste disposal 133

watermarks, Windows 31

wavy paper, troubleshooting 87

Web sites

customer support 125

fraud reports 118

Material Safety Data Sheet

(MSDS) 136

ordering supplies 101

weight

device 128

paper specifications 21

white or faded stripes 91

WIA-compliant software, scanning

from 58

Windows

driver settings 30

driver supported 8 help, printer-driver 8

scanning from TWAIN or WIA

software 58

settings, changing 9

supported operating systems 6

uninstalling software 10

wrinkles, troubleshooting 87

150 Index ENWW

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement

Table of contents