Biostar H61MLV motherboard

Biostar H61MLV motherboard
H61MLV S etup Man ual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.
Dichiarazione di conformità
sintetica
Ai sensi dell’art. 2 comma 3 del D.M.
275 del 30/10/2002
Si dichiara che questo prodotto è
conforme alle normative vigenti e
soddisfa i requisiti essenziali richiesti
dalle direttive
2004/108/CE, 2006/95/CE e
1999/05/CE
quando ad esso applicabili
Short Declaration of conformity
We declare this product is complying
with the laws in force and meeting all
the essential requirements as specified
by the directives
2004/108/CE, 2006/95/CE and
1999/05/CE
whenever these laws may be applied
Table of Contents
Chapter 1: Introduction ........................................ 1
1.1
1.2
1.3
1.4
1.5
Before You Start......................................................................................... 1
Package Checklist ..................................................................................... 1
Motherboard Features.............................................................................. 2
Rear Panel Connectors.............................................................................. 3
Motherboard Layout................................................................................. 4
Chapter 2: Hardware Installation .......................... 5
2.1
2.2
2.3
2.4
Installing Central Processing Unit (CPU) ............................................... 5
FAN Headers.............................................................................................. 7
Installing System Memory ........................................................................ 8
Connectors and Slots................................................................................ 10
Chapter 3: Headers & Jumpers Setup .................. 13
3.1
3.2
How to Setup Jumpers............................................................................. 13
Detail Settings .......................................................................................... 13
Chapter 4: Useful Help ........................................ 17
4.1
4.2
4.3
4.4
4.5
Driver Installation Note.......................................................................... 17
Software .................................................................................................... 18
Extra Information.................................................................................... 22
AMI BIOS Beep Code ............................................................................... 23
Troubleshooting ....................................................................................... 24
Appendix: SPEC In Other Languages ................... 26
German.................................................................................................................. 26
French .................................................................................................................... 28
Italian..................................................................................................................... 30
Spanish ................................................................................................................... 32
Portuguese ............................................................................................................ 34
Polish...................................................................................................................... 36
Russian ................................................................................................................... 38
Arabic..................................................................................................................... 40
Japanese ................................................................................................................ 42
H6 1 M LV
CHAPTER 1: INTRODUCTION
1.1
BEFORE YOU START
Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:
„
„
„
„
„
„
„
1.2
Prepare a dry and stable working environment with
sufficient lighting.
Always disconnect the computer from power outlet
before operation.
Before you take the motherboard out from anti-static
bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.
Avoid touching the components on motherboard or the
rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.
Do not leave any unfastened small parts inside the
case after installation. Loose parts will cause short
circuits which may damage the equipment.
Keep the computer from dangerous area, such as heat
source, humid air and water.
The operating temperatures of the computer should be
0 to 45 degrees Celsius.
PACKAGE CHECKLIST
Serial ATA Cable X 2
Rear I/O Panel for ATX Case X 1
Installation Guide X 1
Fully Setup Driver CD X 1
Note: The package contents may be different due to area or your motherboard version.
1
Motherboard Manual
1.3
MOTHERBOARD FEATURES
SPEC
Supports Execute Disable Bit / Enhanced Intel
Socket 1155
CPU
SpeedStep® / Intel Architecture-64 / Extended
Intel Core i7 / i5 / i3 / Pentium / Celeron
Memory 64 Technology / Virtualization Technology /
processor
Hyper Threading
Chipset
Super I/O
Intel H61
IT8728
Environment Control initiatives
Provides the most commonly used legacy
Hardware Monitor Controller
Super I/O functionality
Fan Speed Controller
Low Pin Count Interface
ITE's "Smart Guardian" function
DDR3 DIMM Slots x 2
Dual Channel Mode DDR3 memory module
Main
Max Memory Capacity 16GB
Memory
Each DIMM supports 512MB/
Supports DDR3 1066 / 1333
Registered DIMM and ECC DIMM is not supported
1GB/2GB/4GB/8GB DDR3
SATA 2
Data transfer rates up to 3.0 Gb/s
Integrated Serial ATA Controller
SATA Version 2.0 specification compliant
LAN
10 / 100 Mb/s auto negotiation
AR8152 / AR8162
Half / Full duplex capability
Sound
Codec
Slots
On Board
Connectors
2
5.1 channels audio out
VT1708B
High Definition Audio
PCI-E Gen2 x16 slot
x1
Supports PCI-E Gen2 x16 expansion card
PCI-E Gen2 x1 slot
x1
Supports PCI-E Gen2 x1 expansion card
SATA2 Connector
x4
Each connector supports 1 SATA2 device
Front Panel Connector
x1
Supports front panel facilities
Front Audio Connector
x1
Supports front panel audio function
CPU Fan Header
x1
CPU Fan power supply (with Smart Fan function)
System Fan Header
x1
System Fan Power supply
Clear CMOS Header
x1
Restore CMOS data to factory default
USB2.0 Connector
x2
Each connector supports 2 front panel USB2.0 ports
H6 1 M LV
SPEC
Printer Port Connector
x1
Each connector supports 1 Printer port
Serial Port Connector
x1
Connects to RS-232 Port
Power Connector (24pin)
x1
Connects to Power supply
Power Connector (4pin)
x1
Connects to Power supply
PS/2 Keyboard
x1
Connects to PS/2 Keyboard
PS/2 Mouse
x1
Connects to PS/2 Mouse
Rear Panel
VGA Port
x1
Connect to D-SUB monitor
I/O
LAN port
x1
Connect to RJ-45 ethernet cable
USB2.0 Port
x4
Connect to USB2.0 devices
Audio Jack
x3
Provide Audio-In/Out and Mic. connection
Board Size
170 (W) x 226 (L) mm
Biostar reserves the right to add or remove support
OS Support Windows XP / Vista / 7
for any OS with or without notice
1.4
REAR PANEL CONNECTORS
PS/2
Mouse
LAN
Line In/
Surround
Line Out
Mic In 1/
Bass/ Center
PS/2
Keyboard
VGA
USB2.0X2 USB2.0X2
NOTE:
Since the audio chip supports High Definition Audio Specification, the function of each
audio jack can be defined by software. The input / output function of each audio jack listed
above represents the default setting. However, when connecting external microphone to
the audio port, please use the Line In (Blue) and Mic In (Pink) audio jack.
NOTE:
Maximum resolution:
VGA: 2048 x 1536 @75Hz
3
Motherboard Manual
1.5
MOTHERBOARD LAYOUT
KBMS1
CPU_FAN1
ATX PWR2
CPU1
DDR3_B1
VGA1
DDR3_A1
Socket 1155
SYS_FAN1
USB1
RJ45USB1
BAT1
AUDIO1
F_AUDIO1
CODEC
Super
I/O
ATXPWR1
PEX16_1
BIOS
LAN
H61
PEX1_1
SATA2
JCMOS1
F_USB1
SATA3
J_PRINT1
F_USB2
J_COM1
Note: ■ represents the 1st pin.
4
SATA1
PANEL1
SATA4
H6 1 M LV
CHAPTER 2: HARDWARE INSTALLATION
2.1
INSTALLING CENTRAL PROCESSING UNIT (CPU)
Special Notice:
Remove Pin Cap before installation, and make good preservation
for future use. When the CPU is removed, cover the Pin Cap on the
empty socket to ensure pin legs won’t be damaged.
Step 1: Pull the socket locking lever out from the socket and then raise
the lever up.
Step 2: Remove the Pin Cap.
5
Motherboard Manual
Step 3: Look for the triangular cut edge on socket, and the golden dot on
CPU should point forwards this triangular cut edge. The CPU will
fit only in the correct orientation.
Step 4: Hold the CPU down firmly, and then lower the lever to locked
position to complete the installation.
Step 5: Put the CPU Fan and heatsink assembly on the CPU and buckle it
on the retention frame. Connect the CPU FAN power cable into
the CPU_FAN1 to complete the installation.
6
H6 1 M LV
2.2
FAN HEADERS
These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.
CPU_FAN1: CPU Fan Header
1
4
Pin
1
2
3
4
Assignment
Ground
+12V
FAN RPM rate
sense
Smart Fan
Control
SYS_FAN1: System Fan Header
Pin
1
3
1
2
3
Assignment
Ground
+12V
FAN RPM rate
sense
Note:
The SYS_FAN1 support 3-pin head connectors; the CPU_FAN1 supports 4-pin head
connector. When connecting with wires onto connectors, please note that the red wire is
the positive and should be connected to pin#2, and the black wire is Ground and should
be connected to GND.
7
Motherboard Manual
2.3
INSTALLING SYSTEM MEMORY
8
DDR3_B1
DDR3_A1
A. Memory Modules
1.
Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.
2.
Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.
H6 1 M LV
B. Memory Capacity
DIMM Socket
Location
DDR3 Module
DDR3_A1
512MB/1GB/2GB/4GB/8GB
DDR3_B1
512MB/1GB/2GB/4GB/8GB
Total Memory
Size
Max is 16GB.
C. Dual Channel Memory Installation
Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table.
Dual Channel Status DDR3_A1 DDR3_B1
Disabled
O
X
Disabled
X
O
Enabled
O
O
(O means memory installed; X, not installed.)
The DRAM bus width of the memory module must be the same(x8 or
x16)
9
Motherboard Manual
2.4
CONNECTORS AND SLOTS
SATA1~SATA4: Serial ATA Connectors
The motherboard has a PCI to SATA Controller with 4 channels SATA2 interface,
it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.
Pin
1
2
3
4
5
6
7
SATA1
SATA2
SATA3
SATA4
7
4
Assignment
Ground
TX+
TXGround
RXRX+
Ground
1
ATXPWR2: ATX Power Source Connector
This connector provides +12V to CPU power circuit.
4
3
1
2
Pin
1
2
3
4
10
Assignment
+12V
+12V
Ground
Ground
H6 1 M LV
ATXPWR1: ATX Power Source Connector
This connector allows user to connect 24-pin power connector on the ATX
power supply.
Pin
13
14
15
16
17
18
19
20
21
22
23
24
Assignment
+3.3V
-12V
Ground
PS_ON
Ground
Ground
Ground
NC
+5V
+5V
+5V
Ground
12
24
1
13
Pin
1
2
3
4
5
6
7
8
9
10
11
12
Assignment
+3.3V
+3.3V
Ground
+5V
Ground
+5V
Ground
PW_OK
Standby Voltage+5V
+12V
+12V
+3.3V
11
Motherboard Manual
PEX16_1: PCI-Express Gen2 x16 Slot
-
PCI-Express 2.0 compliant.
Maximum theoretical realized bandwidth of 8GB/s simultaneously per
direction, for an aggregate of 16GB/s totally.
PCI-Express Gen2 supports a raw bit-rate of 5.0Gb/s on the data pins.
2X bandwidth over the PCI-Express 1.1 architecture.
PEX1_1: PCI-Express Gen2 x1 Slot
-
PCI-Express 2.0 compliant.
Data transfer bandwidth up to 500MB/s per direction; 1GB/s in total.
PCI-Express supports a raw bit-rate of 5Gb/s on the data pins.
PEX16_1
PEX1_1
12
H6 1 M LV
CHAPTER 3: HEADERS & JUMPERS SETUP
3.1
HOW TO SETUP JUMPERS
The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.
Pin opened
3.2
Pin closed
Pin1-2 closed
DETAIL SETTINGS
PANEL1: Front Panel Header
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case’s front panel switch
functions.
POW_LED
On/Off
+ + -
9
1
16
8
+ SPK
RST
HLED
Pin
1
2
3
4
5
6
7
8
Assignment
+5V
N/A
N/A
Speaker
HDD LED (+)
HDD LED (-)
Ground
Reset control
Function
Speaker
Connector
Hard drive
LED
Reset button
Pin
9
10
11
12
13
14
15
16
Assignment
N/A
N/A
N/A
Power LED (+)
Power LED (+)
Power LED (-)
Power button
Ground
Function
N/A
N/A
Power LED
Power-on button
13
Motherboard Manual
F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel
These headers allow user to connect additional USB cable on the PC front panel,
and also can be connected with internal USB devices, like USB card reader.
Pin
1
2
3
4
5
6
7
8
9
10
F_USB1
F_USB2
2
10
1
9
Assignment
+5V (fused)
+5V (fused)
USBUSBUSB+
USB+
Ground
Ground
Key
NC
F_AUDIO1: Front Panel Audio Header
This header allows user to connect the front audio output cable with the PC front
panel.
14
10
9
2
1
Pin
1
2
3
4
5
6
7
8
9
10
Assignment
Mic Left in
Ground
Mic Right in
GPIO
Right line in
Jack Sense
Front Sense
Key
Left line in
Jack Sense
H6 1 M LV
JCMOS1: Clear CMOS Header
Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and
the CMOS data. Please carefully follow the procedures to avoid damaging the
motherboard.
1
3
Pin 1-2 Close:
Normal Operation (default).
1
3
Pin 2-3 Close:
Clear CMOS data.
1
3
※ Clear CMOS Procedures:
1.
2.
3.
4.
5.
6.
Remove AC power line.
Set the jumper to “Pin 2-3 close”.
Wait for five seconds.
Set the jumper to “Pin 1-2 close”.
Power on the AC.
Load Optimal Defaults and save settings in CMOS.
J_COM1: Serial Port Connector
The motherboard has a Serial Port Connector for connecting RS-232 Port.
2
10
1
9
Pin
Assignment
1
2
3
4
5
6
7
8
9
10
Carrier detect
Received data
Transmitted data
Data terminal ready
Signal ground
Data set ready
Request to send
Clear to send
Ring indicator
NC
15
Motherboard Manual
J_PRINT1: Printer Port Connector
This header allows you to connector printer on the PC.
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
16
Assignment
-Strobe
-ALF
Data 0
-Error
Data 1
-Init
Data 2
-Scltin
Data 3
Ground
Data 4
Ground
Data 5
2
26
1
25
Pin
14
15
16
17
18
19
20
21
22
23
24
25
26
Assignment
Ground
Data 6
Ground
Data 7
Ground
-ACK
Ground
Busy
Ground
PE
Ground
SCLT
Key
H6 1 M LV
CHAPTER 4: USEFUL HELP
4.1
DRIVER INSTALLATION NOTE
After you installed your operating system, please insert the Fully Setup
Driver CD into your optical drive and install the driver for better system
performance.
You will see the following window after you insert the CD
The setup guide will auto detect your motherboard and operating system.
Note:
If this window didn’t show up after you insert the Driver CD, please use file browser to
locate and execute the file SETUP.EXE under your optical drive.
A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.
B. Software Installation
To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.
C. Manual
Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.
Note:
You will need Acrobat Reader to open the manual file. Please download the latest version
of Acrobat Reader software from
http://www.adobe.com/products/acrobat/readstep2.html
17
Motherboard Manual
4.2
SOFTWARE
Installing Software
1. Insert the Setup CD to the optical drive. The drivers installation program
would appear if the Autorun function has been enabled.
2. Select Software Installation, and then click on the respective software
title.
3. Follow the on-screen instructions to complete the installation.
Launching Software
After the installation process, you will see the software icon “eHOT Line” /
“BIOS Update” appears on the desktop. Double-click the icon to launch the
utility.
eHot-Line (Optional)
eHot-Line is a convenient utility that helps you to contact with our
Tech-Support system. This utility will collect the system information which is
useful for analyzing the problem you may have encountered, and then send
these information to our tech-support department to help you fix the problem.
Before you use this utility, please set Outlook Express as your default e-mail client application program.
represents important
*informa
ti on that you
must provide. Wi thout
this information, you may
not be able to send out
the mail.
This bl ock will show
the i nformation which
would be collected in
the mail .
conditi on
*Describe
of your system.
your area or
*Select
the area cl ose to you.
Provide the e-ma il
address that you would
like to send the copy to.
e the name of
*Provid
the memory module
manufacturer.
Provide the name of
the power suppl y
manufacturer and the
model no.
Send the mail out.
Exi t thi s dialog.
Save these in forma tion to a .txt file
18
H6 1 M LV
After filling up this information, click “Send”
to send the mail out. A warning dialog would
appear asking for your confirmation; click
“Send” to confirm or “Do Not Send” to cancel.
If you want to save this information to a .txt file, click “Save As…” and then you
will see a saving dialog appears asking you to enter file name.
Enter the file name and then click
“Save”. Your system information
will be saved to a .txt file.
Open the saved .txt file, you will see
your system information including
motherboard/BIOS/CPU/video/
device/OS information. This
information is also concluded in the
sent mail.
We will not share customer’s data with any other third parties,
so please feel free to provide your system information while using
eHot-Line service.
If you are not using Outlook Express as your default e-mail client
application, you may need to save the system information to a .txt file
and send the file to our tech support with other e-mail application.
Go to the following web
http://www.biostar.com.tw/app/en-us/about/contact.php for getting
our contact information.
19
Motherboard Manual
BIOS Update
BIOS Update is a convenient utility which allows you to update your
motherboard BIOS under Windows system.
Show current BIOS information
Update BIOS
from the Internet
Update BIOS
with a BIOS file
<Backup BIOS>
Once click on this button, the saving
dialog will show. Choose the
position to save file and enter file
name. (We recommend that the file
name should be English/number
and no longer than 7 characters.)
Then click Save.
20
Save current BIOS
to a .bin file
H6 1 M LV
<Update BIOS>
Before doing this, please download the proper BIOS file from the website.
Then click Update BIOS button, a
dialog will show for asking you backup
current BIOS. Click Yes for BIOS
backup and refer to the Backup BIOS
procedure; or click No to skip this
procedure.
After the BIOS Backup procedure, the
open dialog will show for requesting the
BIOS file which is going to be updated.
Please choose the proper BIOS file for
updating, then click on Open.
The utility will update BIOS with the
proper BIOS file, and this process may
take minutes. Please do not open any
other applications during this process.
After the BIOS Update process, click on
OK to restart the system.
While the system boots up and the full screen logo shows, press
key to enter BIOS setup.
<Delete>
In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. BIOS Update is completed.
All the information and content above about the software are subject to be changed
without notice. For better performance, the software is being continuously updated.
The information and pictures described above are for your reference only. The actual
information and settings on board may be slightly different from this manual.
21
Motherboard Manual
4.3
EXTRA INFORMATION
CPU Overheated
If the system shuts down automatically after system is powered on for
seconds, the phenomenon means the CPU protection function has
been activated.
When the CPU is over heated, the motherboard will shutdown
automatically to avoid a damage of the CPU, and the system may not
power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU protection
function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.
22
H6 1 M LV
4.4
AMI BIOS BEEP CODE
Boot Block Beep Codes
Number of Beeps
1
2
3
4
5
7
10
11
12
13
Description
No media present. (Insert diskette in floppy drive A:)
“AMIBOOT.ROM” file not found in root directory of diskette in
A:
Insert next diskette if multiple diskettes are used for recovery
Flash Programming successful
File read error
No Flash EPROM detected
Flash Erase error
Flash Program error
“AMIBOOT.ROM” file size error
BIOS ROM image mismatch (file layout does not match
image present in flash device)
POST BIOS Beep Codes
Number of Beeps
1
3
6
7
8
Description
Memory refresh timer error
Base memory read/write test error
Keyboard controller BAT command failed
General exception error (processor exception interrupt error)
Display memory error (system video adapter)
Troubleshooting POST BIOS Beep Codes
Number of Beeps
1, 3
6, 7
8
Troubleshooting Action
Reseat the memory, or replace with known good modules.
Fatal error indicating a serious problem with the system.
Consult your system manufacturer. Before declaring the
motherboard beyond all hope, eliminate the possibility of
interference by a malfunctioning add-in card. Remove all
expansion cards except the video adapter.
z If beep codes are generated when all other expansion
cards are absent, consult your system manufacturer’s
technical support.
z If beep codes are not generated when all other expansion
cards are absent, one of the add-in cards is causing the
malfunction. Insert the cards back into the system one at a
time until the problem happens again. This will reveal the
malfunctioning card.
If the system video adapter is an add-in card, replace or
reseat the
video adapter. If the video adapter is an integrated part of the
system board, the board may be faulty.
23
Motherboard Manual
4.5
TROUBLESHOOTING
Probable
1.
There is no power in the system.
Power LED does not shine; the
fan of the power supply does not
work
2.
Indicator light on keyboard does
not shine.
System is inoperative. Keyboard lights
are on, power indicator lights are lit,
and hard drives are running.
System does not boot from a hard disk
drive, but can be booted from optical
drive.
Solution
1.
2.
3.
Make sure power cable is
securely plugged in.
Replace cable.
Contact technical support.
Using even pressure on both ends of
the DIMM, press down firmly until the
module snaps into place.
1.
Check cable running from disk to
disk controller board. Make sure
both ends are securely plugged
in; check the drive type in the
standard CMOS setup.
2.
Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.
System only boots from an optical
1.
Back up data and applications
drive. Hard disks can be read,
files.
applications can be used, but system 2.
Reformat the hard drive.
fails to boot from a hard disk.
Re-install applications and data
using backup disks.
Screen message shows “Invalid
Review system’s equipment. Make sure
Configuration” or “CMOS Failure.”
correct information is in setup.
System cannot boot after user installs a 1.
Set master/slave jumpers
second hard drive.
correctly.
2.
Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility
with other drives.
24
H6 1 M LV
This page is intentionally left blank.
25
Motherboard Manual
APPENDIX: SPEC IN OTHER LANGUAGES
GERMAN
Spezifikationen
Unterstützt Execute Disable Bit / Enhanced Intel
Socket 1155
CPU
SpeedStep® / Intel Architecture-64 / Extended
Intel Core i7 / i5 / i3 / Pentium / Celeron
Memory 64 Technology / Virtualization Technology /
Prozessoren
Hyper Threading
Chipsatz
Intel H61
IT8728
Super E/A
Umgebungskontrolle,
Bietet die häufig verwendeten alten Super Hardware-Überwachung
E/A-Funktionen.
Lüfterdrehzahl-Controller/-Überwachung
Low Pin Count-Schnittstelle
"Smart Guardian"-Funktion von ITE
DDR3 DIMM-Steckplätze x 2
Dual-Kanal DDR3 Speichermodul
Arbeitsspeich Max. 16GB Arbeitsspeicher
Unterstützt DDR3 1066 / 1333
er
Jeder DIMM unterstützt 512MB/
registrierte DIMMs. ECC DIMMs werden nicht
1GB/2GB/4GB/8GB DDR3.
unterstützt.
SATA 2
Datentransferrate bis zu 3.0Gb/s
Integrierter Serial ATA-Controller
Konform mit der SATA-Spezifikation Version 2.0
LAN
10 / 100 Mb/s Auto-Negotiation
AR8152 / AR8162
Halb-/ Vollduplex-Funktion
HD
Unterstützt High-Definition Audio
Audio-Unters VT1708B
5.1-Kanal-Audioausgabe
tützung
Steckplätze
PCI-E Gen2 x 16 Steckplatz
x1
PCI-E Gen2 x1-Steckplatz
x1
Onboard-Ans SATA2-Anschluss
x4
Jeder Anschluss unterstützt 1 SATA2-Laufwerk
chluss
Fronttafelanschluss
x1
Unterstützt die Fronttafelfunktionen
Front-Audioanschluss
x1
Unterstützt die Fronttafel-Audioanschlussfunktion
CPU-Lüfter-Sockel
x1
CPU-Lüfterstromversorgungsanschluss (mit Smart
Fan-Funktion)
26
H6 1 M LV
Spezifikationen
System-Lüfter-Sockel
x1
"CMOS löschen"-Sockel
x1
USB2.0-Anschluss
x2
System-Lüfter-Stromversorgungsanschluss
Jeder Anschluss unterstützt 2
Fronttafel-USB2.0-Anschlüsse
Druckeranschluss Anschluss
x1
Serieller Anschluss
x1
Stromanschluss (24-polig)
x1
Stromanschluss (4-polig)
x1
PS/2-Tastatur
x1
PS/2-Maus
x1
Rückseiten-E VGA-Anschluss
x1
/A
LAN-Anschluss
x1
USB2.0-Anschluss
x4
Audioanschluss
x3
Jeder Anschluss unterstützt 1 Druckeranschluss
Platinengröße 170 mm (B) X 226 mm (L)
Biostar behält sich das Recht vor, ohne Ankündigung
OS-Unterstüt
zung
Windows XP / Vista / 7
die Unterstützung für ein Betriebssystem
hinzuzufügen oder zu entfernen.
27
Motherboard Manual
FRENCH
SPEC
Prend en charge les technologies d'exécution de bit
Socket 1155
UC
de désactivation / Intel SpeedStep® optimisée/
Processeurs Intel Core i7 / i5 / i3 / Pentium /
d'architecture Intel 64 / de mémoire étendue 64 / de
Celeron
virtualisation / Hyper Threading
Chipset
Intel H61
IT8728
Initiatives de contrôle environnementales,
Fournit la fonctionnalité de Super E/S
Moniteur de matériel
patrimoniales la plus utilisée.
Contrôleur /moniteur de vitesse de ventilateur
Interface à faible compte de broches
Fonction "Gardien intelligent" de l'ITE
Fentes DDR3 DIMM x 2
Module de mémoire DDR3 à mode à double voie
Mémoire
Capacité mémoire maximale de 16 Go
Prend en charge la DDR3 1066 / 1333
principale
Chaque DIMM prend en charge des DDR3 de Les DIMM à registres et DIMM avec code correcteurs
Super E/S
512Mo/1Go/2Go/4Go/8Go
SATA 2
d'erreurs ne sont pas prises en charge
Taux de transfert jusqu'à 3.0Go/s.
Contrôleur Serial ATA intégré
Conforme à la spécification SATA Version 2.0
LAN
10 / 100 Mb/s négociation automatique
AR8152 / AR8162
Half / Full duplex capability
Prise en
charge
Prise en charge de l'audio haute définition
VT1708B
Sortie audio à 5.1 voies
audio HD
Fentes
Fente PCI-E Gen2 x 16
x1
Fente PCI-E Gen2 x1
x1
Connecteur SATA2
x4
Connecteur
embarqué
Chaque connecteur prend en charge 1 périphérique
SATA2
Connecteur du panneau avant
x1
Prend en charge les équipements du panneau avant
Connecteur Audio du panneau avant x1
Prend en charge la fonction audio du panneau avant
Alimentation électrique du ventilateur UC (avec
Embase de ventilateur UC
x1
fonction de ventilateur intelligent)
28
H6 1 M LV
SPEC
Embase de ventilateur système
x1
Embase d'effacement CMOS
x1
Connecteur USB2.0
x2
Alimentation électrique du ventilateur système
Chaque connecteur prend en charge 2 ports USB2.0
de panneau avant
Connecteur de Port d'imprimante
x1
Port série
x1
Connecteur d'alimentation
x1
Chaque connector prend en charge 1 Port
d'imprimante
(24 broches)
Connecteur d'alimentation
x1
(4 broches)
E/S du
panneau
arrière
Clavier PS/2
x1
Souris PS/2
x1
Port VGA
x1
Port LAN
x1
Port USB2.0
x4
Fiche audio
x3
Dimensions
de la carte
170 mm (l) X 226 mm (H)
Support SE Windows XP / Vista / 7
Biostar se réserve le droit d'ajouter ou de supprimer
le support de SE avec ou sans préavis
29
Motherboard Manual
ITALIAN
SPECIFICA
Supporto di Execute Disable Bit / Enhanced
Socket 1155
CPU
Intel SpeedStep® / Architettura Intel 64 /
Processore Intel Core i7 / i5 / i3 /
Tecnologia Extended Memory 64 / Tecnologia
Pentium / Celeron
Virtualization / Hyper Threading
Chipset
Intel H61
IT8728
Super I/O
Memoria
principale
Funzioni di controllo dell’ambiente:
Fornisce le funzionalità legacy Super I/O Monitoraggio hardware
usate più comunemente.
Controller / Monitoraggio velocità ventolina
Interfaccia LPC (Low Pin Count)
Funzione "Smart Guardian" di ITE
Alloggi DIMM DDR3 x 2
Modulo di memoria DDR3 a canale doppio
Capacità massima della memoria 16GB
Supporto di DDR3 1066 / 1333
Ciascun DIMM supporta DDR3
DIMM registrati e DIMM ECC non sono
512MB/1GB/2GB/4GB/8GB
supportati
Velocità di trasferimento dei dati fino a
SATA 2
Controller Serial ATA integrato
3.0Gb/s.
Compatibile specifiche SATA Versione 2.0
LAN
Negoziazione automatica 10 / 100 Mb/s
AR8152 / AR8162
Capacità Half / Full Duplex
Supporto
audio HD
Alloggi
Connettori
su scheda
Supporto audio High-Definition (HD)
VT1708B
Uscita audio 5.1 canali
Alloggio PCI-E Gen2 x16
x1
Alloggio PCI Express Gen2 x1
x1
Connettore SATA2
x4
Ciascun connettore supporta 1 unità SATA2
Connettore pannello frontale
x1
Supporta i servizi del pannello frontale
Connettore audio frontale
x1
Supporta la funzione audio pannello frontale
Collettore ventolina CPU
x1
Alimentazione ventolina CPU (con funzione
Smart Fan)
Collettore ventolina sistema
30
x1
Alimentazione ventolina di sistema
H6 1 M LV
SPECIFICA
Collettore cancellaz ione CMOS
x1
Connettore USB2.0
x2
Ciascun connettore supporta 2 porte USB2.0
pannello frontale
Connettore Porta stampante
x1
Porta seriale
x1
Connettore alimentazione
x1
Ciascun connettore supporta 1 Porta
stampante
(24 pin)
Connettore alimentazione
x1
(4 pin)
Tastiera PS/2
x1
Mouse PS/2
x1
Porta VGA
x1
posteriore Porta LAN
x1
I/O
pannello
Dimension
i scheda
Porta USB2.0
x4
Connettore audio
x3
170 mm (larghezza) x 226 mm
(altezza)
Biostar si riserva il diritto di aggiungere o
Sistemi
operativi
supportati
Windows XP / Vista / 7
rimuovere il supporto di qualsiasi sistema
operativo senza preavviso.
31
Motherboard Manual
SPANISH
Especificación
Admite Bit de deshabilitación de ejecución / Intel
Socket 1155
CPU
SpeedStep® Mejorado / Intel Architecture-64 /
Procesador Intel Core i7 / i5 / i3 / Pentium /
Tecnología Extended Memory 64 / Tecnología de
Celeron
virtualización / Hyper Threading
Conjunto de
chips
Intel H61
IT8728
Iniciativas de control de entorno,
Le ofrece las funcionalidades heredadas de
Monitor hardware
uso más común Súper E/S.
Controlador/monitor de velocidad de ventilador
Interfaz de cuenta Low Pin
Función "Guardia inteligente" de ITE
Ranuras DIMM DDR3 x 2
Módulo de memoria DDR3 de canal Doble
Memoria
Capacidad máxima de memoria de 16GB
Admite DDR3 de 1066 / 1333
principal
Cada DIMM admite DDR de
No admite DIMM registrados o DIMM compatibles
512MB/1GB/2GB/4GB/8GB
con ECC
Súper E/S
SATA 2
Tasas de transferencia de hasta 3.0 Gb/s.
Controlador ATA Serie Integrado
Compatible con la versión SATA 2.0
Red Local
Negociación de 10 / 100 Mb/s
AR8152 / AR8162
Funciones Half / Full dúplex
Soporte de
sonido HD
Ranuras
Soporte de sonido de Alta Definición
VT1708B
Salida de sonido de 5.1 canales
Ranura PCI-E Gen2 x16
X1
Ranura PCI-E Gen2 x 1
X1
Conectores Conector SATA2
X4
Cada conector soporta 1 dispositivos SATA2
en placa
Conector de panel frontal
X1
Soporta instalaciones en el panel frontal
Conector de sonido frontal
X1
Soporta funciones de sonido en el panel frontal
Cabecera de ventilador de CPU
X1
Fuente de alimentación de ventilador de CPU (con
función Smart Fan)
Cabecera de ventilador de sistema X1
32
Fuente de alimentación de ventilador de sistema
H6 1 M LV
Especificación
Cabecera de borrado de CMOS
X1
Conector USB2.0
X2
Cada conector soporta 2 puertos USB2.0 frontales
Conector Puerto de impresora
X1
Cada conector soporta 1 Puerto de impresora
Puerto serie
X1
Conector de alimentación
X1
(24 patillas)
Conector de alimentación
X1
(4 patillas)
Panel
trasero de
E/S
Teclado PS/2
X1
Ratón PS/2
X1
Puerto VGA
X1
Puerto de red local
X1
Puerto USB2.0
X4
Conector de sonido
X3
Tamaño de
la placa
170 mm. (A) X 226 Mm. (H)
Soporte de
sistema
operativo
Biostar se reserva el derecho de añadir o retirar el
Windows XP / Vista / 7
soporte de cualquier SO con o sin aviso previo.
33
Motherboard Manual
PORTUGUESE
ESPECIFICAÇÕES
Suporta as tecnologias Execute Disable Bit /
Socket 1155
CPU
Processador Intel Core i7 / i5 / i3 / Pentium /
Celeron
Chipset
o Super I/O
/ Extended Memory 64 / Virtualization / Hyper
Threading
Intel H61
IT8728
Especificaçã
Enhanced Intel SpeedStep® / Intel Arquitecture -64
Iniciativas para controlo do ambiente
Proporciona as funcionalidades mais
utilizadas em termos da especificação Super
I/O.
Monitorização do hardware
Controlador/Monitor da velocidade da ventoinha
Função "Smart Guardian" da ITE
Interface LPC (Low Pin Count).
Ranhuras DIMM DDR3 x 2
Módulo de memória DDR3 de canal duplo
Memória
Capacidade máxima de memória: 16 GB
Suporta módulos DDR3 1066 / 1333
principal
Cada módulo DIMM suporta uma memória
Os módulos DIMM registados e os DIMM ECC não
DDR3 de 512MB/ 1GB/2GB/4GB/8GB
são suportados
Velocidades de transmissão de dados até 3.0 Gb/s.
SATA 2
Controlador Serial ATA integrado
Compatibilidade com a especificação SATA versão
2.0
LAN
Auto negociação de 10 / 100 Mb/s
AR8152 / AR8162
Capacidade semi/full-duplex
Suporte
para áudio
de alta
Suporta a especificação High-Definition Audio
VT1708B
Saída de áudio de 5.1 canais
definição
Ranhuras
Ranhura PCI-E Gen2 x16
x1
Ranhura PCI-E Gen2 x 1
x1
Conector SATA2
x4
Cada conector suporta 1 dispositivo SATA2
Conectores Conector do painel frontal
x1
Para suporte de várias funções no painel frontal
na placa
Conector de áudio frontal
x1
Suporta a função de áudio no painel frontal
Conector da ventoinha da CPU
x1
34
Alimentação da ventoinha da CPU (com a função
Smart Fan)
H6 1 M LV
ESPECIFICAÇÕES
Conector da ventoinha do sistema
x1
Conector para limpeza do CMOS
x1
Conector USB2.0
x2
Conector da para impressora
x1
Porta série
x1
Conector de alimentação
x1
Alimentação da ventoinha do sistema
Cada conector suporta 2 portas USB2.0 no painel
frontal
Cada conector suporta 1 Porta para impressora
(24 pinos)
Conector de alimentação
x1
(4 pinos)
Teclado PS/2
x1
Entradas/S Rato PS/2
x1
aídas no
Porta VGA
x1
painel
Porta LAN
x1
traseiro
Porta USB2.0
x4
Tomada de áudio
x3
Tamanho
da placa
170 mm (L) X 226 mm (A)
Sistemas
operativos
suportados
A Biostar reserva-se o direito de adicionar ou
Windows XP / Vista / 7
remover suporte para qualquer sistema operativo
com ou sem aviso prévio.
35
Motherboard Manual
POLISH
SPEC
Obsługa Execute Disable Bit / Enhanced Intel
Socket 1155
Procesor
SpeedStep® / Intel Architecture-64 / Extended
Procesor Intel Core i7 / i5 / i3 / Pentium /
Memory 64 Technology / Virtualization Technology /
Celeron
Hyper Threading
Chipset
Intel H61
Gniazda DDR3 DIMM x 2
Moduł pamięci DDR3 z trybem podwójnego kanału
Pamięć
Maks. wielkość pamięci 16GB
główna
Każde gniazdo DIMM obsługuje moduły
Obsługa DDR3 1066 / 1333
Brak obsługi Registered DIMM oraz ECC DIMM
512MB/1GB/2GB/4GB/8GB DDR3
Super I/O
SATA 2
IT8728
Funkcje kontroli warunków pracy,
Zapewnia najbardziej powszechne funkcje
Monitor H/W
Super I/O.
Kontroler/Monitor prędkości wentylatora
Interfejs Low Pin Count
Funkcja ITE "Smart Guardian"
Transfer danych do 3.0 Gb/s.
Zintegrowany kontroler Serial ATA
Zgodność ze specyfikacją SATA w wersji 2.0
LAN
10 / 100 Mb/s z automatyczną negocjacją szybkości
AR8152 / AR8162
Działanie w trybie połowicznego / pełnego dupleksu
Obsługa
audio HD
Obsługa High-Definition Audio
VT1708B
5.1 kanałowe wyjście audio
Gniazdo PCI-E Gen2 x16
x1
Gniazdo PCI-E Gen2 x 1
x1
Złącze SATA2
x4
Każde złącze obsługuje 1 urządzenie SATA2
wbudowane Złącze panela przedniego
x1
Obsługa elementów panela przedniego
x1
Obsługa funkcji audio na panelu przednim
Gniazda
Złącza
Przednie złącze audio
Złącze główkowe wentylatora
procesora
Zasilanie wentylatora procesora (z funkcją Smart
x1
Fan)
Złącze główkowe wentylatora
Zasilanie wentylatora systemowego
systemowego
36
x1
H6 1 M LV
SPEC
Złącze główkowe kasowania CMOS x1
Każde złącze obsługuje 2 porty USB2.0 na panelu
Złącze USB2.0
x2
przednim
Złącze Port drukarki
x1
Port szeregowy
x1
Złącze zasilania (24 pinowe)
x1
Złącze zasilania (4 pinowe)
x1
Klawiatura PS/2
x1
Mysz PS/2
x1
Back Panel Port VGA
x1
I/O
Port LAN
x1
Port USB2.0
x4
Gniazdo audio
x3
Każde złącze obsługuje 1 Port drukarki
Wymiary
płyty
170 mm (S) X 226 mm (W)
Obsluga
Biostar zastrzega sobie prawo dodawania lub
systemu
operacyjne
go
Windows XP / Vista / 7
odwoływania obsługi dowolnego systemu
operacyjnego bez powiadomienia.
37
Motherboard Manual
RUSSIAN
СПЕЦ
CPU
(центральн
ый
Поддержка технологий Execute Disable Bit /
Socket 1155
Процессор Intel Core i7 / i5 / i3 / Pentium /
Celeron
микросхем
/ Extended Memory 64 Technology / технологии
виртуализация / Hyper Threading
процессор)
Набор
Enhanced Intel SpeedStep® / Intel Architecture-64
Intel H61
Слоты DDR3 DIMM x 2
Модуль памяти с двухканальным режимом DDR3
Основная
Максимальная ёмкость памяти 16 ГБ
Поддержка DDR3 1066 / 1333
память
Каждый модуль DIMM поддерживает
Не поддерживает зарегистрированные модули
512МБ/1ГБ/2ГБ/4ГБ/8ГБ DDR3
DIMM and ECC DIMM
Super I/O
IT8728
Инициативы по охране окружающей среды,
Обеспечивает наиболее используемые
Аппаратный монитор
действующие функциональные
Регулятор скорости вентилятора/ монитор
возможности Super I/O.
Функция ITE "Smart Guardian"
Интерфейс с низким количеством выводов (Интеллектуальная защита)
SATA 2
Локальная
сеть
Встроенное последовательное устройство скорость передачи данных до 3.0 гигабит/с.
управления ATA
Соответствие спецификации SATA версия 2.0
Автоматическое согласование 10 / 100 Мб/с
AR8152 / AR8162
Частичная / полная дуплексная способность
Звуковая
поддержка
жесткого
Звуковая поддержка High-Definition
VT1708B
5.1канальный звуковой выход
диска
Слоты
Слот PCI-E Gen2 x16 @ x16
x1
Слот PCI-E Gen2 x 1
x1
Встроенны Разъём SATA2
й разъём
x4
Каждый разъём поддерживает 1 устройство SATA2
Разъём на лицевой панели
x1
Поддержка устройств на лицевой панели
Входной звуковой разъём
x1
Контактирующее приспособление
вентилятора центрального процессора x1
38
Поддержка звуковых функций на лицевой
панели
Источник питания для вентилятора центрального
процессора (с функцией интеллектуального
вентилятора)
H6 1 M LV
СПЕЦ
Контактирующее приспособление
вентилятора системы
x1
Источник питания для вентилятора системы
Открытое контактирующее
приспособление CMOS
x1
USB2.0-разъём
x2
Разъём Порт подключения
x1
Последовательный порт
x1
Разъем питания (24 вывод)
x1
Разъем питания (4 вывод)
x1
Клавиатура PS/2
x1
Задняя
Мышь PS/2
x1
панель
Порт VGA
x1
средств
Порт LAN
x1
ода
панели
Поддержка
OS
подключения принтера
x4
Гнездо для подключения
наушников
Размер
лицевой панели
Каждый разъём поддерживает 1 Порт
принтера
ввода-выв USB2.0-порт
Каждый разъём поддерживает 2 USB2.0-порта на
x3
170 мм (Ш) X 226 мм (В)
Biostar сохраняет за собой право добавлять или
Windows XP / Vista / 7
удалять средства обеспечения для OS с или без
предварительного уведомления.
39
‫‪Motherboard Manual‬‬
‫‪ARABIC‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬
‫‪Execute Disable Bit / Enhanced Intel‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺎت‬
‫‪Socket 1155‬‬
‫‪SpeedStep® / Intel Architecture-64 / Extended‬‬
‫وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ‬
‫اﻟﻤﺮآﺰیﺔ‬
‫‪Intel Core i7 / i5 / i3 / Pentium /‬ﻣﻌﺎﻟﺠﺎت‬
‫‪Memory 64 Technology / Virtualization Technology /‬‬
‫ﺑﺘﺮدد یﺼﻞ إﻟﻰ ‪Celeron‬‬
‫‪Hyper Threading‬‬
‫ﻣﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ ‪Intel H61‬‬
‫ﻓﺘﺤﺔ ‪DDR3 DIMM‬‬
‫ﻋﺪد‪2‬‬
‫ﻣﺰدوﺝﺔ اﻟﻘﻨﺎة‪DDR3‬وﺣﺪة ذاآﺮة‬
‫ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى ‪ 16‬ﺝﻴﺠﺎ ﺑﺎیﺖ‬
‫اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ ﺳﻌﺎت ‪ 1333 / 1066‬ﻣﻴﺠﺎ ﺑﺎیﺖ‪DDR3‬ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻣﻦ ﻥﻮع‬
‫ﻣﻴﺠﺎ ﺑﺎیﺖ و‪ /512 /1‬ﺳﻌﺔ ‪ DDR3‬ﺗﺪﻋﻢ ذاآﺮة ﻣﻦ ﻥﻮع ‪DIMM‬ﺗﺪﻋﻢ آﻞ ﻓﺘﺤﺔ‬
‫‪ ECC‬وﺗﻠﻚ اﻟﺘﻲ ﻻ ﺗﺘﻮاﻓﻖ ﻣﻊ ‪DIMM‬ﻻ ﺗﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة‬
‫و‪ /2‬و‪ /4‬و‪ 8‬ﺝﻴﺠﺎ ﺑﺎیﺖ‬
‫وﺳﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ‪:‬‬
‫‪IT8728‬‬
‫ﻣﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺣﺎﻟﺔ اﻷﺝﻬﺰة‬
‫‪ Super I/O‬اﻷآﺜﺮ اﺳﺘﺨﺪاﻣًﺎ‪Super I/O .‬ﺗﻮﻓﺮ وﻇﻴﻔﺔ‬
‫ﻣﺮاﻗﺐ ﻓﻲ ﺳﺮﻋﺔ اﻟﻤﺮوﺣﺔ‬
‫‪Low Pin Count Interface‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫‪ ITE‬ﻣﻦ "‪"Smart Guardian‬وﻇﻴﻔﺔ‬
‫ﺝﻴﺠﺎﺑﺖ‪/‬ﺙﺎﻥﻴﺔ‪3.0.‬ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺑﺴﺮﻋﺎت ﺗﺼﻞ إﻟﻰ‬
‫‪ SATA 2‬ﻣﺘﻜﺎﻣﻞ‪Serial ATA‬ﻣﺘﺤﻜﻢ‬
‫‪ 2.0‬اﻹﺹﺪار ‪SATA‬ﻣﻄﺎﺑﻘﺔ ﻟﻤﻮاﺹﻔﺎت‬
‫ﺗﻔﺎوض ﺗﻠﻘﺎﺋﻲ ‪ 100/10‬ﻣﻴﺠﺎ ﺑﺎیﺖ ‪ /‬ﺙﺎﻥﻴﺔ‬
‫ﺵﺒﻜﺔ داﺥﻠﻴﺔ ‪AR8152 / AR8162‬‬
‫إﻣﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻣﻞ‪/‬اﻟﻨﺼﻔﻲ‬
‫ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮیﻒ ﻣﻦ‬
‫دﻋﻢ اﻟﺼﻮت ﻋﺎﻟﻲ‬
‫اﻟﺘﻌﺮیﻒ‬
‫‪VT1708B‬‬
‫‪ 5.1‬ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‬
‫ﻓﺘﺤﺔ ‪PCI-E Gen2 x16‬‬
‫ﻋﺪد‪1‬‬
‫ﻓﺘﺤﺔ ‪PCI-E Gen2 x 1‬‬
‫ﻋﺪد ‪1‬‬
‫اﻟﻔﺘﺤﺎت‬
‫اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ ﻣﻨﻔﺬ ‪SATA2‬‬
‫اﻟﻠﻮﺣﺔ‬
‫ﻋﺪد ‪4‬‬
‫یﺪﻋﻢ آﻞ ﻣﻨﻔﺬ واﺣﺪ ﻣﻦ أﺝﻬﺰة ‪SATA2‬‬
‫ﻣﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬
‫ﻋﺪد ‪1‬‬
‫یﺪﻋﻢ ﺗﺠﻬﻴﺰات اﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬
‫ﻣﻨﻔﺬ اﻟﺼﻮت اﻷﻣﺎﻣﻲ‬
‫ﻋﺪد ‪1‬‬
‫یﺪﻋﻢ وﻇﻴﻔﺔ اﻟﺼﻮت ﺑﺎﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬
‫وﺹﻠﺔ ﻣﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰیﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ ﻣﻊ وﻇﻴﻔﺔ ‪Smart Fan‬‬
‫‪40‬‬
‫‪H6 1 M LV‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬
‫وﺹﻠﺔ ﻣﺮوﺣﺔ اﻟﻨﻈﺎم‬
‫ﻋﺪد ‪1‬‬
‫وﺹﻠﺔ ﻣﺴﺢ ‪CMOS‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ‪USB2.0‬‬
‫ﻋﺪد ‪2‬‬
‫ﻣﻨﻔﺬ ﻃﺎﺑﻌﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ﺗﺴﻠﺴﻠﻲ‬
‫ﻋﺪد‪1‬‬
‫ﻣﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪24‬دﺑﻮس(‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪4‬دﺑﺎﺑﻴﺲ(‬
‫ﻋﺪد ‪1‬‬
‫ﻟﻮﺣﺔ ﻣﻔﺎﺗﻴﺢ ‪PS/2‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﺎوس ‪PS/2‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﺎﻓﺬ دﺥﻞ‪/‬ﺥﺮج ﻣﻨﺎﻓﺬ ‪VGA‬‬
‫ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺣﺔ اﻟﻨﻈﺎم‬
‫یﺪﻋﻢ آﻞ ﻣﻨﻔﺬ ﻓﺘﺤﺘﻲ ‪ USB2.0‬ﺑﺎﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬
‫ﻋﺪد ‪1‬‬
‫اﻟﻠﻮﺣﺔ اﻟﺨﻠﻔﻴﺔ ﻣﻨﻔﺬ ﺵﺒﻜﺔ اﺗﺼﺎل ﻣﺤﻠﻴﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﺎﻓﺬ ‪USB2.0‬‬
‫ﻋﺪد ‪4‬‬
‫ﻣﻘﺒﺲ ﺹﻮت‬
‫ﻋﺪد ‪3‬‬
‫ﺣﺠﻢ اﻟﻠﻮﺣﺔ ‪ 170‬ﻣﻢ )ﻋﺮض( ‪ 226 X‬ﻣﻢ )ارﺗﻔﺎع(‬
‫ﺑﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ﺗﺸﻐﻴﻞ ﺑﺈﺥﻄﺎر أو ‪Biostar‬ﺗﺤﺘﻔﻆ‬
‫دﻋﻢ أﻥﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ‬
‫‪Windows XP / Vista / 7‬‬
‫ﺑﺪون إﺥﻄﺎر‪.‬‬
‫‪41‬‬
Motherboard Manual
JAPANESE
仕様
Execute Disable Bit / Enhanced Intel SpeedStep® /
Socket 1155
CPU
Intel Architecture-64 / Extended Memory 64
Intel Core i7 / i5 / i3 / Pentium / Celeron プロ
Technology / Virtualization Technology / Hyper
セッサ
Threadingをサポートします
チップセット Intel H61
DDR3 DIMMスロット x 2
デュアル チャンネルモードDDR3メモリモジュール
最大メモリ容量16GB
DDR3 1066 / 1333 をサポート
メインメモリ
各DIMMは 512MB/1GB/2GB/4GB/8GB DDR3
登録済みDIMMとECC DIMMはサポートされません
をサポート
Super I/O
SATA 2
IT8728
環境コントロールイニシアチブ、
もっとも一般に使用されるレガシーSuper I/O機
H/Wモニター
能を採用しています。
ファン速度コントローラ/ モニター
低ピンカウントインターフェイス
ITEの「スマートガーディアン」機能
最高3.0 Gb/秒のデータ転送速度
統合シリアルATAコントローラ
SATAバージョン2.0仕様に準拠
LAN
10 / 100 Mb/秒のオートネゴシエーション
AR8152 / AR8162
半/全二重機能
VT1708B
HDオーディ
ハイデフィニションオーディオのサポート
オのサポート
5.1 チャンネルオーディオアウト
PCI-E Gen2 x16スロット
x1
PCI Express Gen2 x 1スロット
x1
スロット
オンボードコ SATA2コネクタ
x4
各コネクタは1つのSATA2デバイスをサポートします
ネクタ
フロントパネルコネクタ
x1
フロントパネル機能をサポートします
フロントオーディオコネクタ
x1
フロントパネルオーディオ機能をサポートします
CPUファンヘッダ
x1
CPUファン電源装置(スマートファン機能を搭載)
システムファンヘッダ
x1
システムファン電源装置
CMOSクリアヘッダ
x1
42
H6 1 M LV
仕様
各コネクタは2つのフロントパネルUSB2.0ポートをサポ
USB2.0コネクタ
x2
ートします
プリンタポートコネクタ
x1
シリアルポート
x1
電源コネクタ(24ピン)
x1
電源コネクタ(4ピン)
x1
PS/2キーボード
x1
PS/2マウス
x1
背面パネル
VGAポート
x1
I/O
LANポート
x1
USB2.0ポート
x4
オーディオジャック
x3
各コネクタは1つのプリンタポートをサポートします
ボードサイズ 170 mm (幅) X 226 mm (高さ)
OSサポート Windows XP / Vista / 7
Biostarは事前のサポートなしにOSサポートを追加または
削除する権利を留保します。
2011/09/15
43
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement