Hannspree SV19LMMB 18.5" HD-Ready LED TV

Hannspree SV19LMMB 18.5" HD-Ready LED TV
Regulatory Information ................................................................ 3
Description of Warning Symbols .................................................. 3
Safety Notices ............................................................................. 4
Preface ....................................................................................... 6
Warranty and Service .................................................................. 6
1. Getting Started ........................................................................8
1.1 Package Contents .............................................................8
1.2 Stand Base Assembly ........................................................9
1.3 Introducing the TV ........................................................... 11
1.4 Features ......................................................................... 11
1.5 Control Panel .................................................................. 12
1.6 Input and Output Jacks .................................................... 12
1.7 Remote Control ............................................................... 14
1.8 Inserting the Remote Control Batteries ............................. 18
2. Setting up your TV ................................................................. 20
2.1 Power Connection ........................................................... 20
2.2 Rear Connections ............................................................ 20
2.3 Using the TV ................................................................... 22
2.3.1 Turning the TV On and Off ...................................... 22
2.3.2 Switching Source Signals ........................................ 22
2.3.3 Performing an Automatic Channel Search ................ 22
2.3.4 Selecting Channels ................................................. 22
2.3.5 Adjusting the Volume .............................................. 22
3. Adjusting On-Screen Display (OSD) Settings .......................... 23
3.1 OSD Setting Menus ......................................................... 24
3.2 Adjusting Picture Settings ................................................ 24
3.3 Adjusting Sound Settings ................................................. 25
3.4 Adjusting TV Settings ...................................................... 26
3.5 Adjusting Features Settings ............................................. 29
1
English
Table of Contents
Table of Contents
English
3.6 Adjusting Eco Settings .................................................... 32
4. Troubleshooting ..................................................................... 33
5. Support Timing ...................................................................... 34
6. Support USB Compatible Formats .......................................... 35
7. Specifications ........................................................................ 36
8. Dissembling the stand base .................................................... 37
9. Using the Cable Organizer ..................................................... 38
2
English
Regulatory Information
CE Conformity Statement
This device is in conformity with the requirements of EU Council Directive
2004/108/EC on the approximation of the laws of the Member States relating to
electromagnetic compatibility and Directive 2006/95/EC on the harmonization of
the laws of Member States relating to electrical equipment for use within certain
voltage limits. Hannspree cannot accept responsibility for any failure to satisfy
the requirements resulting from a non-recommended modification of the device.
Description of Warning Symbols
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
CAUTION
This symbol is used to alert users
to pay attention to important
descriptions regarding usage,
maintenance (repair), and
additional important information
related to this TV.
This symbol is used to alert users
to the risk of electric shocks due
to dangerous and uninsulated
components.
3
English
Safety Notices
Installation Safety Notes
Location
Avoid allowing the TV to get prolonged exposure to sunlight or other strong
sources of heat. Leave sufficient distance between the TV and the wall to
provide enough space for the emission of heat.
WARNING
To reduce the risk of fire or electric shock, do not expose this apparatus to
rain or moisture.
Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION
These servicing instructions are for use by qualified service personnel only. To
reduce the risk of electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so.
WARNING
To prevent the spread of fire, keep candles or other open flames away from
this product at all times.
4
English
Notes:
•
•
The LED-LCD HDTV is for entertainment use only and visual
display tasks are excluded.
This device uses a VGA connector to connect to a PC. To reduce
the influence of main frequency on the source signal, use a VGA
monitor cable with ferrite shield.
Personal Safety
1. To avoid overloading the power supply, never plug too many electrical
devices into an outlet, power strip, or extension cable.
2. Dangerous high-voltage electric power components are located inside the
TV. To avoid electric shock, do not disassemble the casing.
3. Do not place or drop metals, small objects, or flammable materials into
the vent of the TV.
4. If the TV is dropped, falls down, or is otherwise damaged, unplug the
power cord immediately and contact an authorized service technician.
5. If any fluid is sprayed or dropped into the TV, contact an authorized
service technician.
6. The screen of the TV is made of glass. Avoid hitting or scraping it. If the
screen is broken, do not touch the broken glass.
7. Do not allow children to use the TV unattended.
8. Be careful when disconnecting the power plug. Hold the plug. Do not
attempt to disconnect the plug by pulling on the power cord.
Installation
1. Do not place the TV in locations where there is excessive steam or dust.
2. Avoid blocking the TV's vents, do not place the TV on a bed, sofa, carpet,
or in a sealed cabinet.
5
English
3. Install the outdoor antenna away from power transmission lines to avoid
possible danger.
Preface
Thank you for purchasing a Hannspree Liquid Crystal Display Television (LEDLCD HDTV). Your new TV will allow you to enjoy superior audio and video while
enriching your lifestyle with advanced technology.
Please carefully read this manual in its entirety before setting up, using or
operating your TV. To ensure the safe and correct installation and operations of
the TV, it is important that the safety and operation instructions in this manual
are followed.
This instruction manual is designed to assist you in setting up and using the TV.
The information in this manual has been carefully checked for accuracy;
however, no guarantee is given to the correctness of the contents. The
information in this manual is subject to change without notice.
To the extent allowed by applicable law, Hannspree, Inc. (“Hannspree”) shall not
be liable for direct, indirect, special, exemplary, incidental or consequential
damages arising from any defect or omission in this manual, even if advised of
the possibility of such damages in advance.
Warranty and Service
For complete warranty service information, please refer to the “Warranty Card”
enclosed with your TV.
6
English
Copyright
© Copyright 2010 Hannspree, Inc.
All rights reserved. This manual is protected by copyright and distributed under
licenses restricting its use, copying and distribution. No part of this manual may
be reproduced in any form by any means without the prior written authorization
of Hannspree. The TV described in this manual may include copyrighted
software of Hannspree (or other third parties). Hannspree (or other third parties)
preserves the exclusive rights for copyrighted software, such as the right to
distribute or reproduce the copyrighted software. Accordingly, and to the extent
allowed by applicable law, any copyrighted software contained in the product
described herein shall not be distributed, modified, reverse engineered, or
reproduced in any manner without the prior written authorization of Hannspree
(or of other third parties).
The Hannspree logos presented herein are trademarks of Hannspree. All other
product names, trademarks or logos mentioned herein are used for identification
purpose only, and may be the trademarks or registered trademarks of their
respective owners.
The purchase of the product described herein shall not be deemed to grant,
either directly or by implication, estoppel or otherwise, any license under the
copyrights, patents, patent applications or trademarks of Hannspree, except for
the normal, non-exclusive use that arises by operation of law in the sale of a
product.
Trademark Notice
Hannspree products incorporate High-Definition Multimedia
Interface (HDMI™) technology.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
License Notice and Trademark Acknowledgment
Manufactured under license from Dolby Laboratories. Dolby
and the double-D symbol are trademarks of Dolby
Laboratories.
7
1
English
1.1
Getting Started
Package Contents
Make sure the following components are included in the box. Please contact
Hannspree Customer Service immediately if anything is missing or damaged.
•
TV
•
User’s manual
•
Quick start guide
•
Warranty card
•
Power cord
•
Remote control and batteries
•
TV cleaning cloth
•
Stand screw x 3 (for 19"/22")
•
Stand screws x 4 (for 25”/28”/32”/42”)
ME61
According to WEEE regulation, this TV can’t be handled as normal
trash in Europe when it is out of usage. Please refer to the recycle
information from our website to handle it.
8
English
1.2
Stand Base Assembly
SV19/SV22:
(1) Always assemble the TV base
with assistance from another person.
(2) Lay the TV over a towel or cloth to
prevent scratching to the frame or
glass and place near the edge of a
table.
Insert base, then 3 screws
(provided) and fasten securely.
Please fasten with cross
screwdriver.
(3) Follow the close-up, then place
the base with the right direction.
Be certain to hold the TV firmly with
your hand to avoid slipping.
Always carry the TV with assistance
from another person.
9
English
SV25/SV28/SV32/SV42:
(1) Always assemble the TV base
with assistance from another person.
(2) Lay the TV over a towel or cloth to
prevent scratching to the frame or
glass and place near the edge of a
table.
Insert base, then 4 screws
(provided) and fasten securely.
Please fasten with cross
screwdriver.
(3) Follow the close-up, then place
the base with the right direction.
Be certain to hold the TV firmly with
your hand to avoid slipping.
10
Always carry the TV with assistance
from another person.
Introducing the TV
You can watch Analog (PAL/SECAM), Digital (DVB-T/DVB-C) television channels,
and easily connect a VCR, STB or DVD player to the SCART, HDTV (Component),
AV (Composite), and HDMI input ports (location of these ports depends on model).
You can also use the TV as a monitor for your PC by connecting it through the VGA
port.
Convenient control buttons located on the TV and a handy remote control let you
change channels, adjust the volume, and change display settings through an easyto-use on-screen display menu system. The built-in stereo speakers provide full rich
sound and a convenient audio output port lets you connect to an external audio
system or earphones.
1.4
Features
• TV Tuner: Built-in TV Tuner
• Audio/ Video support:
– SCART inputs
– VGA (PC) input
– HDMI inputs
– HDTV (Component) input
– R/L audio inputs
– PC line input
– 3.5 mm stereo earphone
output
– AV (Composite) input
– SPDIF output (digital audio
out)
• On-Screen Display (OSD) menu
system
• USB (Music, photo and movie)
• USB update firmware
• Teletext level 1.5 with 1000 pages
memory
• Built-in stereo speakers
• Image Enhancement Technology
– 3:2 and 2:2 pull down
– 3D Comb Filter
– HD-ready TV
– 3D MA deinterlacing
– Dynamic backlight control
– Dynamic contrast
• Eco design
• Noise Reduction
Note:
• The supporting devices mentioned in this manual may vary on different models.
For more information, please refer to the manufacturer’s user manual or the
Quick Start Guide of your TV model.
11
English
1.3
English
1.5
Control Panel
Description
Button
Power
Function
Press to turn the TV on or off.
Input source
INPUT
Press to select the proper input source.
Menu
MENU
Press to turn the on-screen display (OSD)
menu on / off.
Program select
P
Press to increase the program number or
move upward to the previous item on the
OSD menu.
Program select
P
Press to decrease the program number or
move downward to the next item on the OSD
menu.
Volume adjust
VOL +
Press to increase the volume or move to the
right on the OSD menu.
Volume adjust
VOL -
Press to decrease the volume or move to the
left on the OSD menu.
Remote IR
sensor
Receive incoming remote control commands.
Power/ Standby
indicator
Indicate power or standby status. The LED
turns white when the device is turned on.
Speakers
Deliver high-quality sounds.
1.6
Input and Output Jacks
Description
Cable/Antenna
12
Connector
Function
Connect to an antenna or cable TV.
Connector
English
Description
Function
Earphone Output
Connect to earphones or external
speakers with built-in amplifier.
Component/
CVBS Inputs
(Audio)
Connect to an external device, such as a
VCR, STB, or a DVD player.
Component
Inputs (Video)
Connect to an external device, such as a
VCR, STB, or a DVD player.
PC Audio Input
Connect to a PC’s line / audio port.
SCART 1
Connect to an external device, such as a
VCR, STB, or a DVD player with AV, SVideo, RGB, L/R IN, Analog TV Out, and
L/R Out.
SCART 2
(32”/42” only)
Connect to an external device, such as a
VCR, STB, or a DVD player with AV, SVideo, L/R IN.
VGA (PC) Input
Connect to a PC’s VGA port.
USB
Connect to a USB device.
Video
CI
VIDEO
Connect to an external device, such as a
VCR, STB, or a DVD player.
Connect to a CI device.
13
English
Description
Connector
Function
HDMI 1 Input
Connect an HDMI equipment or an
HDMI-DVI adapter cable to devices such
as a DVD player or set-top box.
HDMI 2 Input
(32”/42” only)
Connect an HDMI equipment or an
HDMI-DVI adapter cable to devices such
as a DVD player or set-top box.
HDMI 3 Input
Connect an HDMI equipment or an
HDMI-DVI adapter cable to devices such
as a DVD player or set-top box.
SPDIF
SPDIF
Connect to a digital audio output device
such as a home theater.
AC IN
Power Connector
1.7
Connect to the included power cord.
Remote Control
Description
Icon
Power
Input Signal
Type
Press to turn the TV on or off.
INPUT
14
Press to select the input signal type selections:
TV, YPbPr, AV, SCART, PC, HDMI 1, HDMI 2,
and USB.
Use to select a program directly. Press 0-9 to
enter the program numbers (press 1 and 0 for
program 10).
Keypad
Pro.List
Function
Pro.LIST
Press to display the programs contained.
Last
Icon
LAST
Function
Press to return to the last channel selected.
Information
INFO
Press to display current channel/program
information.
Menu
MENU
Press to turn the on-screen display (OSD)
menu on / off.
OK
OK
Teletext mode
Volume adjust
Mute
EPG
TEXT
VOL
/ VOL
MUTE
Red, Green,
Yellow, Blue
Press to display detailed programming
information for channels (only for DTV).
Press to activate teletext.
Press VOL + to increase volume.
Press VOL - to decrease volume.
Press to eliminate sound. Press it again or
press the volume adjust buttons to restore
sound.
Press to change the multi sound selection of
the TV channel.
Dual sound
Select
program
Press to confirm selection.
Press up, down, left or right to scroll through
the on-screen display menus.
Arrows
Electronic
Program
Guide
English
Description
PS / PT
Press PS to increase the program number.
Press PT to decrease the program number.
Press the colored buttons to perform specific
tasks in the OSD menu or teletext mode.
15
English
Description
Icon
Function
Index
INDEX
Press to display a table of the available teletext
subjects.
(Programmable in the teletext mode only)
MIX
Press to display the teletext over the program
on the screen. (Programmable in the teletext
mode only)
SIZE
Press to adjust screen size. (Programmable in
the teletext mode only)
SUBTITLE
With an ATV source, if teletext mode is
activated and the teletext has a subtitle page,
press to display the subtitle page.
With a DTV source, press to display the subtitle
OSD, and select the language.
Hold
HOLD
Press to inactivate automatic page change
which only occurs when more than one teletext
page exists.
(Programmable in the teletext mode only)
Reveal
REVEAL
Press to display the hidden information, such
as solutions to puzzles. (Programmable in the
teletext mode only)
Sound Mode
SOUND
Press continuously to toggle through all the
sound setting: Personal, Music, or Speech.
Picture Mode
PIC
Press continuously to toggle through all the
picture setting: Vivid, Movie, Eco, Personal,
Standard.
Mix
Adjust size
Subtitle
Exit
Freeze
16
EXIT
FREEZE
Press to exit from the menu.
Press to pause a video frame on-screen.
(Programmable in the TV source only)
Icon
Sleep timer
SLEEP
Aspect ratio
ASPECT
English
Description
Function
Press repeatedly to set the sleep timer (Off,
10Min., 20Min., 30Min., 40Min., 50Min.,
60Min., 90Min., or 120Min.).
Cancel the timer by selecting the “Off” option.
Press to adjust the width-to-height ratio of the
image with aspect ratio: Auto, Normal, Zoom1,
Zoom2, and Full Screen.
Note:
• For best results, use the remote control within a proper distance from the
front of the TV. Do not exceed an angle of 30 degrees when pointing at TV.
• The operational distance may be shortened when the signal sensor is
directly exposed to strong light.
• Aim the transmitter on the remote control at the signal sensor and ensure
that there are no obstacles between them.
17
English
1.8
1
Inserting the Remote Control Batteries
Open the battery compartment cover at the back of the remote control (A).
(A)
2
Insert the batteries paying attention to the polarity markings inside the
battery compartment (B).
(B)
3
Replace the battery compartment cover (C).
(C)
18
English
CAUTION
•
If the remote control is not used for a long period, remove the
batteries and store them properly.
•
Handle damaged or leaking batteries carefully, and wash hands with
soap if they come in contact with leaked chemical fluids.
•
If your remote control has two batteries, do not mix new and old
batteries, or the life of the new batteries will be shortened. Chemical
fluids may leak from the old batteries.
•
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the equipment
manufacturer. Discard used batteries according to manufacturer’s
instructions.
•
Refer to your local recycling or waste disposal rules and contact a
local waste disposal vendor to dispose of used batteries.
•
The remote control cover may have a magnet in it, so do not place
magnetic sensitive items such as watches, credit cards, or flash
media close to the cover.
•
Do not use force when pulling the remote control cover open; you
may damage the hinge.
19
2
English
2.1
Setting up your TV
Power Connection
1
Connect the power cord to the AC IN input jack on the rear of the TV.
2
Insert the plug at the other end of the power cord into a power outlet.
2.2
Rear Connections
See the illustration and table below for device connection instructions.
10
Speaker system
CI-based
devices
AC IN
Camcorder
High quality speaker system
PC
9
DVD player
Camcorder
3
2
VCR/VCD/DVD
1
STB
32”/42”
only
PC
8
32”/42”
only
Earphone
Blu-ray Disc
player
4
Home theater
Video Game
Console
DVD player
VCR
20
5
6
7
VCR/VCD/DVD/STB
Video Game
Console
TV cable / antenna
Connector
1
AUDIO In
2
VGA
English
No.
Notes / Instructions
• The audio cable is optional.
• The VGA and audio cables are optional.
AUDIO In
3
HDMI 1
HDMI 2
HDMI 3
4
SPDIF
5
Component
Video Inputs
• The HDMI cable is optional.
• When the HDMI to HDMI cable is connected,
connecting the audio cable is not necessary.
However it’s necessary to do so if a HDMI to DVI
cable is connected.
• The SPDIF cable is optional.
• The video and audio cables are optional.
Component
Audio Inputs
6
SCART 1
SCART 2
7
Cable/Antenna
8
Earphone
9
Composite
Video Input
• If your AV devices are not equipped with SCART
connectors, you will also need a SCART adapter
except for a SCART to SCART cable.
• When a SCART adapter is used, the S-Video
connector and AV connectors cannot be
connected at the same time, or the wrong signals
might be generated.
• The SCART to SCART cable and SCART adapter
are optional.
• If you cannot receive channels after connecting to
a TV cable or antenna, try scanning for channels.
• The internal TV speakers will not output sound
when a speaker or earphone is plugged in.
• The video and audio cables are optional.
Composite
Audio Inputs
10
CI
• The Common Interface cable is optional.
Note:
The available connectors may vary depending on your TV model.
21
English
2.3
Using the TV
2.3.1
1
Press
Turning the TV On and Off
on the control panel or remote control. The power LED turns white
when the device is turned on.
2
Press
2.3.2
again. The power LED turns off when the device is turned off.
Switching Source Signals
Press INPUT on the control panel or remote control to select the incoming source
signal.
2.3.3
Performing an Automatic Channel Search
Before using the TV to view programs, you need to activate the channel search first.
1
Press MENU on the control panel or remote control, then select to enter the
TV menu.
2
Select Channels > Channel Scan > ATV only or ATV and DTV.
3
Press
2.3.4
on the remote control to run the channel search.
Selecting Channels
•
Press PS on the remote control (or P
the channel number.
on the control panel) to increase
•
Press PT on the remote control (or P
the channel number.
on the control panel) to decrease
•
Enter the specific channel number by pressing the number buttons on the
remote control.
2.3.5
Adjusting the Volume
1
Press VOL+ on the control panel or remote control to increase the volume.
2
Press VOL- on the control panel or remote control to decrease the volume.
3
Press MUTE to eliminate sounds, and press MUTE again or press the
volume buttons to restore the original volume.
22
Adjusting On-Screen Display (OSD)
Settings
The On-Screen Display (OSD) menu system provides a quick and simple method to
adjust the TV settings. The OSD menu can be accessed conveniently through the
buttons on the remote control.
Picture
Smart Picture
Brightness
Contrast
Colour
Tint
Sharpness
Colour Temperature
Advanced Control
MAIN MENUS:
Displays a list of
menus.
Remove
OK
Select
Standard
50
52
53
0
5
Cool
EXIT
Exit
ADJUSTABLE Options:
INSTRUCTIONS:
Displays the setting/value
of the adjustable options.
Quick instructions for
adjusting the settings
Function
TV Control Panel
Remote Control
OSD Menu
MENU
MENU
Up
P
Arrow
Down
P
Arrow
Select/ Increase
VOL +
Arrow
Select/ Decrease
VOL –
Arrow
Return
MENU
EXIT
Exit
MENU
EXIT
23
English
3
English
3.1
OSD Setting Menus
Follow the instructions indicated on the down side of the OSD Function Menu. Press
/P
on the control panel or
/
arrow keys to scroll through the menus,
P
arrow key to select an item, or MENU on the
VOL + on the control panel or the
control panel or EXIT to exit the OSD menu.
The following menus can be set by different adjustment methods.
3.2
Adjusting Picture Settings
1
Press MENU to enter the OSD Main Menu
screen. The Picture menu is displayed.
2
3
Press
4
Press
/
to adjust the scales or
options settings.
5
6
Press
Picture
Smart Picture
Brightness
Contrast
Colour
Tint
Sharpness
Colour Temperature
Advanced Control
to enter the Picture menu.
/
to select an item.
Remove
OK
Select
Standard
50
52
53
0
5
Cool
EXIT
Exit
Press EXIT to return to the Picture menu entry.
Press EXIT to exit the OSD menu.
- The Picture menu can be used to adjust the Smart Picture, Brightness, Contrast,
Colour, Tint, Sharpness, Colour Temperature, Advanced Control, and Advanced
Video (PC only) settings.
• Smart Picture can be set to Standard, Vivid, Movie, Eco, or Personal.
• Brightness, Contrast, and Colour can be adjusted by pressing
/
to move
the scales from 0 to 100.
• Tint can be adjusted by pressing
/
to move the scales from -32 to 32.
• Sharpness can be adjusted by pressing
/
to move the scales from 0 to 7.
• Colour Temperature can be set to Normal, Warm, or Cool.
• Advanced Control can be used to adjust the Noise Reduction, Flesh Tone,
Backlight, and X-Contrast.
• Noise Reduction can be set to Auto, Off, Low, Medium, or High.
• Flesh Tone can be set to On or Off.
• Backlight can be adjusted by pressing
• X-Contrast can be set to On or Off.
24
/
to adjust the scales from 0 to 100.
English
• Advanced Video can be used to adjust the Brightness, Contrast, Color
Temperature, and Advanced Video settings for PC mode.
Picture
Brightness
Contrast
Colour Temperature
Advanced Video
Remove
OK
100
100
Cool
Select
EXIT
Exit
Note: The options available on the OSD may vary depending on the input signal
source.
3.3
Adjusting Sound Settings
1
Press MENU to enter the OSD Main
Menu screen.
2
Press
3
4
Press
5
Press
/
to adjust the scales or
options settings.
6
7
Press EXIT to return to the Sound menu entry.
Press
Sound
Sound Mode
Equalizer 120Hz
Equalizer 500Hz
Equalizer 1.5KHz
Equalizer 5KHz
Equalizer 10KHz
Balance
Virtual Surround
to select the Sound menu.
to enter the Sound menu.
/
to select an item.
Remove
OK
Select
Personal
3
3
2
4
5
0
Off
EXIT
Exit
Press EXIT to exit the OSD menu.
- The Sound menu can be used to adjust the Sound Mode, Equalizer 120Hz, Equalizer
500Hz, Equalizer 1.5KHz, Equalizer 5KHz, Equalizer 10KHz, Balance, Virtual
Surround, Digital Audio Out, AVL, Type, and Audio Description settings.
• Sound Mode can be set to Music, Speech, or Personal.
• Equalizer 120Hz, Equalizer 500Hz, Equalizer 1.5KHz, Equalizer 5KHz, and Equalizer
10KHz can be adjusted by pressing
• Balance can be adjusted by pressing
/
to move the scales from -6 to 6.
/
to move the scales from -50 to 50.
• Virtual Surround can be set to On or Off.
• Digital Audio Out can be set to Dolby Digital, PCM, or Off.
25
English
• AVL can be set to On or Off.
• Type can be set to Normal, Hard of Hearing, or Audio Description.
• To adjust the Audio Description, select Audio Description in the Type setting
first. Press
/
to adjust the scales from 0 to 100.
Note: The options available on the OSD may vary depending on the input signal
source.
3.4
Adjusting TV Settings
1
Press INPUT and select TV as the signal
type.
2
Press MENU to enter the OSD Main Menu
screen.
3
Press
4
5
Press
6
Press
/
to adjust the scales or
options settings.
7
8
Press EXIT to return to the TV menu entry.
Press
TV
Antenna
Austria
Tuner Mode
Country
Channels
to select the TV menu.
to enter the TV menu.
/
to select an item.
Remove
OK
Select
EXIT
Exit
Press EXIT to exit the OSD menu.
- The TV menu can be used to adjust the Tuner Mode, Country, and Channels settings.
• Tuner Mode can be set to Antenna, and Cable.
• Country can be set to Austria, Belgium, Bulgaria, Croatia, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Luxembourg, Netherlands, Norway, Poland, Portugal, Romania, Russia,
Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, UK, Ukraine,
and Other.
• Channels can be used to perform or adjust the Channel Scan, Update Scan,
Single RF Scan, Analogue Manual Scan, Favourite Network Select, Channel
Skip, Channel Sort, Channel Edit, Decoder, Analogue Ch Fine Tune, and
Clean Channel List settings.
26
English
• Select Channel Scan to activate the automatic TV channel search.
Channels
Channel Scan
Channel Scan
Update Scan
Single RF Scan
Analogue Manual Scan
Favourite Network Select
Channel Skip
Channel Sort
Channel Edit
OK
Scan
Select
Status:Scanning...
Analog Channels: 0
Digital Channels: 0
0%
EXIT
Back
EXIT
Cancel
• Select Update Scan to automatically add channels to the existing channel list.
• Select Single RF Scan to search for digital channels within the selected RF
(Radio Frequency) channel.
Single RF Scan
Scan single RF channel. (Digital Only)
0%
RF Channel
Signal Strength
OK
Scan
EXIT
5
100
Back
• Select Analogue Manual Scan to search for analog channels within the specified
frequency range.
Analogue Manual Scan
Search for analogue channels
Start Frequency (MHz)
Scan Up
Scan Down
EXIT
77.30
Back
• Select Favourite Network Select to select your favourite TV channels from the
existing channel list.
27
English
• Use Channel Skip to prevent the desired channels from being accessed. Press
PS/PT on the remote control or P
/P
on the control panel.
Channel Skip
1
2
3
4
5
6
7
8
OK
Set
Analogue
Analogue
Analogue
Analogue
Analogue
Analogue
Analogue
Analogue
Select
--------------------------------EXIT
Back
• Select Channel Sort to change the order of the channel list.
• Channel Edit allows you to adjust the detailed items, including Channel Number,
Channel Name, Frequency, Colour System, and Sound System for each
channel.
Channels
Channel Edit
Channel Scan
Update Scan
Single RF Scan
Analogue Manual Scan
Favourite Network Select
Channel Skip
Channel Sort
Channel Edit
OK
Scan
Select
Transmitter
Channel Number:
Chanel Name:
Frequency
Colour System
Sound System
EXIT
Back
OK
Set
Select
----1
----77.3
Auto
I
EXIT
Back
- To change the channel number, select Channel Number and use the number keys
on the remote control to type numbers.
- To change the channel name, select Channel Name and use the number keys on
the remote control to type letters, digits, or symbols. Press keys repeatedly to toggle
different characters.
28
English
KEY
CHARACTER
0
+
-
.
0
1
A
B
C
1
2
D
E
F
2
3
G
H
I
3
4
J
K
L
4
5
M
N
O
5
6
P
Q
R
6
7
S
T
U
7
8
V
W
X
8
9
Y
Z
9
- Frequency displays the current channel frequency.
- Colour System displays the type of current channel color system.
- Sound System displays the type of current channel sound system.
• Decoder supports the Canal+ (paid TV channel with encrypted programs).
• Select Analogue Ch Fine Tune to adjust precisely the analog channel frequency
to ensure high signal quality.
• Select Clean Channel List to delete all channels.
Note: The TV Settings are only available in TV mode.
3.5
Adjusting Features Settings
1
Press MENU to enter the OSD Main Menu
screen.
2
Press
3
4
Press
5
Press
/
settings.
6
7
Press EXIT to return to the Features menu entry.
Features
to select the Features menu.
to enter the Features menu.
Press
/
to select an item.
to change the options
Menu Language
4:3 Mode
Picture Format
Time
Subtitle
Teletext Language
Common Interface
OAD
Remove
OK
Select
English
4:3
Auto
EXIT
Exit
Press EXIT to exit the OSD menu.
29
English
- The Features menu can be used to adjust the Menu Language, 4:3 Mode, Picture
Format, Time, Subtitle, Teletext Language, Common Interface, OAD, Parental,
Reset Default, Auto Power Off, and SW ver. settings.
• Menu Language can be used to change the on-screen display (OSD) language.
• 4:3 Mode can be used to adjust the display aspect ratio to 4:3, and 16:9 settings.
• Time can be used to adjust the Time Zone, Time, and Sleep Timer settings.
• Subtitle can be used to adjust the Analogue Subtitle, 1st Subtitle, 2nd Subtitle,
and Subtitle Type settings.
• Teletext Language can be used to adjust the Digital Teletext Lang. and Decode
Page Lang. settings.
• Select Common Interface to view the CI supplier information.
• Select OAD to upgrade the software for the device.
• Select Reset Default to restore all settings to the defaults.
• Select SW Ver. to view the current firmware version.
• Select Parental to adjust Channel Block, Parental Guidance, Input Block, Set
Password, and Clear All settings. You will be prompted to enter the password
before entering the Parental sub-menu. By default, the password is “1234”.
Parental
Parental
Password
EXIT
Back
Channel Block
Parental Guidance
Input Block
Set Password
Clear All
OK
Enter
Select
EXIT
Back
• Select Channel Block to block desired channels.
• Select Parental Guidance to set Age Rating. Press
from 4 to 18 or to set as None.
• Select Input Block to block desired input sources.
• Set Auto Power Off to either On or Off.
30
/
to adjust the value
English
• Select Set Password to change the password.
Set Password
New
Confirm
EXIT
Back
• Select Clear All to restore defaults for all parental settings.
Note: Channel Block is only accessible in TV mode.
• Picture Format selections include Auto, Normal, Zoom1, Zoom2, and Full
Screen. Please see below for details.
Auto
Normal
Zoom1
Zoom2
Full Screen
Note: The options available on the OSD may vary depending on the input signal
source.
31
English
3.6
Adjusting Eco Settings
1
Press MENU to enter the OSD Main Menu
screen.
2
Press
3
4
Press
5
Press MENU to return to the Eco menu
entry.
6
Press EXIT to exit the OSD menu.
to select the Eco menu.
Eco
Off
On
to enter the Eco menu.
Press
/
settings.
to adjust the options
Remove
OK
- The Eco menu can be used to adjust the Off and On settings.
32
Select
EXIT
Exit
Troubleshooting
Situation
English
4
Solution
•
•
Connect the power cord properly.
Check if the power LED is on or not.
No picture and sound.
•
•
•
•
Press
on the control panel or remote control.
Press Input to cycle through connected video sources.
Press PS or PT to switch to other TV programs.
Make sure all cables are connected properly.
No picture, or poor picture,
sound is OK.
•
•
Check the antenna and cable connections.
Adjust the Brightness in the Picture OSD menu.
Picture is not in color.
•
Adjust the Colour option in the Picture OSD menu.
Picture is OK, no sound.
•
•
•
•
Make sure the source device is functioning properly.
Make sure the audio cable is connected securely.
Turn the mute off.
Press VOL + on the control panel or remote control.
One of the speakers has no
sound.
•
Adjust the Balance in the Sound OSD menu.
•
Try the Channel Scan function in the Channels OSD
menu.
•
Use the Reset Default function in the Features OSD
menu.
•
If OSD items are colored in gray, the system is in a state
such that those settings are not available.
•
Make sure the video signal cable is connected properly.
•
Adjust the location of the antenna, placing it far from
roads or sources of interference.
Check the antenna and the video signal line connections.
Cannot receive some TV
channels using cable TV.
Want to reset TV settings.
Cannot operate menus.
Screen image turns over.
Snow appears on the screen.
•
Blurred or overlapped
images.
•
•
•
Adjust the sharpness setting.
Choose programs with high quality signals.
Adjust the direction of the antenna or replace the video
signal cable.
Remote control doesn’t work.
•
•
•
•
Make sure the battery is inserted correctly.
Replace the battery with a new one.
Make sure the TV power cord is plugged in.
Make sure the path between the remote control and the
sensor is clear.
Try operating the remote control at a closer distance to
the TV.
•
33
5
English
Support Timing
PC Mode Support Timing
Mode
Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
1
640 x 480
31.469
59.94
2
800 x 600
35.156
56.25
3
800 x 600
37.879
60.317
4
1024 x 768
48.363
60.004
5
1280 x 720
44.772
59.855
6
1280 x 768
47.776
59.87
7
1360 x 768
47.72
59.799
8
1280 x 1024
63.981
60.02
9
1920 x 1080
66.587
60
Video Mode Support Timing
34
Resolution (active dot)
HDMI/YPbPr
480i
V
576i
V
480p
V
576p
V
720p
V
1080i
V
1080p
V
6
English
Support USB Compatible Formats
USB Device Compatibility
Device
File Format
USB 2.0 device
USB memory, USB card reader
File System
FAT/FAT 32
Photo file format
JPEG (*.JPG), PNG
Music format
MPEG1 (*.MP3) Bitrate: 32k, 64k, 96k, 128k, 196k, 256k, 320kbps
Sampling frequency: 32k, 44.1k, 48kHz
Video file format
MPEG1/2 (*.AVI, *.MPG,*.MPEG, *.TS)
MPEG4 (*.AVI, *.MP4,*.MOV, *.MKV)
H.264 (*.AVI, *.MP4,*.MOV, *.MKV, *.TS)
Notes:
• It does not support “NTFS“ and the maximum file size of a single file is 4GB.
• Progressive format jpeg files are not supported.
• Due to the compatibility limitation, not all of USB devices are able to be
displayed properly.
• Operation using USB hubs is not guaranteed.
• Due to the compatibility limitation, not all of external hard disks are able to be
detected correctly.
• Cables used to prolong the USB device must be certified as USB 2.0.
• In USB devices, video files may not be played properly if speed is not enough.
35
7
English
Specifications
Model No.
SV19LMMB
SV22LMMB
SV25LMMB SV28LMMB SV32LMNB
SV42LMNB
Aspect Ratio
16:9
16:9
16:9
Resolution
1366 x 768
1920 x 1080
1920 x 1080 1920 x 1200 1920 x 1080 1920 x 1080
OSD Language
Bulgarian, Croatian, Czech, Danish, Dutch, English, Estonia, Finnish, French,
German, Greek, Hungarian, Italian, Irish, Latvian, Lithuanian, Norwegian, Polish,
Portuguese, Romanian, Russian, Serbian, Slovak, Slovenian, Spanish, Swedish,
Turkish, Ukrainian
DISPLAY
16:10
16:9
16:9
ENHANCEMENT
Sound Output
(RMS Watts)
3W
Sound Mode
Personal, Music, Speech
Picture Format
Auto, Normal, Zoom1, Zoom2, Full Screen
Picture Mode
Standard, Vivid, Movie, Eco, Personal
3W
5W
5W
10 W
10 W
CONNECTION
Tuner Input (75
Input
Rear Connector
Side Connector
SCART 1
SPDIF
HDMI 1
Ω), PC IN: D-SUB and PC Audio, Component Video and L/R Audio
SCART 1
SPDIF
HDMI 1
SCART 1
SPDIF
HDMI 1
SCART 1
SPDIF
HDMI 1
SCART 1
SCART 2
SPDIF
HDMI 1
HDMI 2
SCART 1
SCART 2
SPDIF
HDMI 1
HDMI 2
Common Interface, USB, Earphone, AV In (Composite Audio/Video)
HDMI 2
HDMI 2
HDMI 2
HDMI 2
HDMI 3
HDMI 3
WEIGHT & DIMENSIONS
Product
Dimensions (mm) 467.01 x 341.44 533.81 x 379.31 609.35 x 443 x 672.91 x 527.11 790.18 x 571.43 1021.1 x 705.8
x 148
x 148
210
x 220
x 240
x 270
W x H x D (with
stand)
Net Weight
3.74 kg
4.41 kg
6 kg
8.035 kg
13 kg
19 kg
55 W
95 W
120 W
POWER
Operation (Max.)
Standby
26 W
30 W
36 W
< 0.5 W
Main Power
AC 220~240V
50~60 Hz
Ambient
Temperature
5ºC ~ 35ºC
36
1
2
3
4
Dissembling the stand base
Disconnect all the cables and cords from the TV to prevent breakage.
Carefully place the TV face down on a soft and flat surface (blanket, foam, cloth,
etc) to prevent any damage to the TV.
Remove the screws so that the stand base can be removed.
Gently remove the stand base.
19”/22”
25”/28”/32”/42”
(For reference only)
Wall mounting the TV:
Model Name
SV19LMMB
SV22LMMB
SV25LMMB
SV28LMMB
SV32LMNB
SV42LMNB
1
2
3
4
VESA-compatible
wall bracket (WxH)
100x100 mm
100x100 mm
100x100 mm
100x100 mm
200x200 mm
200x200 mm
Mount holes
number
4
4
4
4
4
4
Screw type
Metric 4 x 10 mm
Metric 4 x 10 mm
Metric 4 x 10 mm
Metric 4 x 10 mm
Metric 4 x 14 mm
Metric 6 x 12 mm
Maximum loading
15 kg
18 kg
24 kg
30 kg
36 kg
72 kg
Purchase a VESA compatible wall bracket
(please refer to the table above).
Locate your ideal TV position on the wall.
Fix the wall bracket firmly on the wall.
Secure the TV to the bracket using the 4
mount holes on the back and center of the TV.
Note:
•
•
Please read the instructions of your specific wall bracket to properly wall mount
the TV.
The TV stand base can be screwed on a table or a hard surface using the hole
on the back of the stand base.
*Installing the LED-LCD HDTV requires special skill that should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. Hannspree bears no responsibility for
improper mounting or mounting that results in accident or injury. You can ask a qualified service personnel
about using an optional bracket to mount the TV to the wall.
37
English
8
9
English
Using the Cable Organizer
Route the cables through the cable clamp as shown:
38
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement