Klein Tools - ECCO Supply
Revised: July 2016 • Replaces: August 2015
KLEIN TOOLS
www.kleintools.com
INDEX
5-BLADE CRIMPER............................................................................. 14-5
BEVERAGE TOOL............................................................................. 14-14
BORESCOPE...................................................................................... 14-13
CABLE CUTTERS — HIGH-LEVERAGE........................................ 14-4
CLAMP METERS — PROFESSIONAL SERIES......................... 14-13
CRIMPING/CUTTING TOOL — NON-INSULATED/INSULATED
CONNECTORS.............................................................................. 14-5
DUCT SLITTING TOOL...................................................................... 14-5
HAND NOTCHER................................................................................ 14-5
SCREWDRIVERS (cont’d)
KEYSTONE-TIP — HEAVY-DUTY SQUARE-SHANKS....... 14-8
MAGNETIC — WITH 32-PIECE TAMPERPROOF
BIT SET....................................................................................... 14-9
MULTI-BIT SCREWDRIVER/NUT DRIVER — 11-IN-1 ...... 14-9
PROFILATED PHILLIPS-TIP — ROUND-SHANKS............. 14-8
SQUARE-RECESS TIP — ROUND-SHANKS......................... 14-8
SNIPS
AVIATION........................................................................................ 14-4
OFFSET............................................................................................ 14-4
HEX-KEY SET — GRIP-IT™............................................................ 14-11
TIE-WIRE REEL.................................................................................. 14-14
LEVEL — TORPEDO RARE EARTH MAGNETIC .................... 14-11
TAPE MEASURES — MAGNETIC................................................ 14-14
MULTI-PURPOSE TOOL — LONG-NOSE.................................... 14-7
TRADESMAN PRO™ ORGANIZERS
10 INCH TOTE............................................................................. 14-15
ELECTRICIAN’S BACKPACK................................................... 14-15
NUT DRIVERS
2-PIECE MAGNETIC TIP CUSHION-GRIP SETS............... 14-10
2-PIECE STUBBY SET — 1-1/2" SHAFTS —
MAGNETIC TIP..................................................................... 14-10
CUSHION-GRIP HOLLOW-SHAFT — 3" SHAFTS.......... 14-10
WITH MAGNETIC TIP............................................................... 14-10
PLIERS
HEAVY-DUTY LONG-NOSE — SIDE-CUTTING................. 14-3
HIGH-LEVERAGE
DIAGONAL-CUTTING.......................................................... 14-3
DIAGONAL-CUTTING — ANGLED HEAD.................... 14-3
IRONWORKER’S..................................................................... 14-2
SIDE-CUTTING....................................................................... 14-2
SIDE-CUTTING — CONNECTOR CRIMPING............... 14-2
IRONWORKER’S............................................................................ 14-2
KLAW™ PUMP............................................................................... 14-3
PUMP................................................................................................ 14-3
TUBE CUTTERS
PROFESSIONAL............................................................................ 14-6
PROFESSIONAL MINI................................................................. 14-6
UTILITY GLOVES.............................................................................. 14-14
UTILITY KNIFE — FOLDING........................................................ 14-11
BLADES......................................................................................... 14-11
VOLTAGE TESTERS — NON-CONTACT
(NCVT-1/NCVT-2)..................................................................... 14-12
WIRE STRIPPER/CUTTER................................................................. 14-6
WRENCHES
ADJUSTABLE
EXTRA WIDE JAW.................................................................. 14-7
HIGH CAPACITY..................................................................... 14-7
RATCHETING REFRIGERATION............................................... 14-7
SCREWDRIVERS
4-PIECE MINIATURE CUSHION-GRIP SET........................... 14-9
CABINET-TIP — ROUND-SHANKS........................................ 14-8
DEMOLITION................................................................................. 14-8
Expert Service. Quality Products. Since 1960.
ECCO Supply™
www.eccosupply.ca 14-1
Revised: July 2016 • Replaces: August 2015
KLEIN TOOLS
www.kleintools.com
PLIERS
HIGH-LEVERAGE IRONWORKER’S
13
-9ST
•Twists and cuts soft annealed rebar tie wire
•High-leverage design. Rivet is closer to the cutting edge for
46% greater cutting and gripping power than other plier designs
•Hook bend handle
• Spring-loaded action for self-opening
• Heavy-duty knurled jaws
D2
ITEM #
MODEL
NOSE
TYPE
OVERALL
JAW
JAW
JAW
KNIFE
WEIGHT
LENGTH LENGTH WIDTH THICKNESS LENGTH HANDLE
(LBS)
707681
D213-9ST
Square
9-3/8"
1-19/32" 1-1/4"
(238 mm) (41 mm) (32 mm)
5/8"
(16 mm)
25/32"
(20 mm)
PlasticDipped
Dark Blue
1.10
IRONWORKER’S
ITEM #
MODEL
NOSE
TYPE
707689
D201-7CST
Square
13
-9ST
•Twists and cuts soft annealed rebar tie wire
•Hook bend handle
• Spring-loaded action for self-opening
• Heavy-duty knurled jaws
D2
OVERALL
JAW
JAW
JAW
KNIFE
WEIGHT
LENGTH LENGTH WIDTH THICKNESS LENGTH HANDLE
(LBS)
9-1/4"
1-9/32" 1-5/32"
(235 mm) (33 mm) (29 mm)
1/2"
(13 mm)
5/8"
(16 mm)
PlasticDipped
Dark Blue
.75
HIGH-LEVERAGE SIDE-CUTTING
•High-leverage design. Rivet is closer to the cutting edge for 46% greater cutting and
gripping power than other plier designs
•Streamlined design with sure-gripping, cross-hatched knurled jaws
ITEM #
MODEL
707674
D213-9NE
NOSE
TYPE
OVERALL
JAW
JAW
JAW
KNIFE
WEIGHT
LENGTH LENGTH WIDTH THICKNESS LENGTH HANDLE
(LBS)
New
9-3/8"
1-19/32" 1-1/4"
England (238 mm) (41 mm) (32 mm)
5/8"
(16 mm)
25/32"
(20 mm)
PlasticDipped
Dark Blue
1.14
HIGH-LEVERAGE SIDE-CUTTING — CONNECTOR CRIMPING
•Crimping die behind hinge for superior leverage crimping of non-insulated connectors, lugs
and terminals
•High-leverage design. Rivet is closer to the cutting edge for 46% greater cutting and
gripping power than other plier designs
• Streamlined design with rounded nose and sure-gripping, cross-hatched knurled jaws
ITEM #
MODEL
707675
D213-9NECR
NOSE
TYPE
OVERALL
JAW
JAW
JAW
KNIFE
WEIGHT
LENGTH LENGTH WIDTH THICKNESS LENGTH HANDLE
(LBS)
New
9-3/8"
1-19/32" 1-1/4"
England (238 mm) (41 mm) (32 mm)
5/8"
(16 mm)
25/32"
(20 mm)
PlasticDipped
Yellow
1.08
– E.&O.E. – All Prices F.O.B. Our Warehouse – Subject to Change Without Notice –­ All Taxes Extra – May not be Available at All Branches –
14-2 www.eccosupply.ca
ECCO Supply™
Revised: July 2016 • Replaces: August 2015
KLEIN TOOLS
www.kleintools.com
PLIERS (cont’d)
HIGH-LEVERAGE DIAGONAL-CUTTING
•High-leverage design. Rivet is closer to the cutting edge for 36% greater cutting power
than other plier designs
ITEM #
MODEL
707676
D228-8
OVERALL
JAW
JAW
JAW
CUTTING
LENGTH LENGTH WIDTH THICKNESS KNIVES
8-1/16"
13/16" 1-3/16"
(205 mm) (21 mm) (30 mm)
7/16"
(11 mm)
Standard
HANDLE
PlasticDipped Red
WEIGHT
(LBS)
.60
HIGH-LEVERAGE DIAGONAL-CUTTING — ANGLED HEAD
•Angled head design for easy work in confined spaces
•High-leverage design. Rivet is closer to the cutting edge for 36% greater cutting
power than other plier designs
ITEM #
MODEL
707677
D248-8
OVERALL
JAW
JAW
JAW
CUTTING
LENGTH LENGTH WIDTH THICKNESS KNIVES
8-1/16"
13/16" 1-3/16"
(205 mm) (21 mm) (30 mm)
7/16"
(11 mm)
Standard
HANDLE
PlasticDipped Red
WEIGHT
(LBS)
.60
HEAVY-DUTY LONG-NOSE — SIDE-CUTTING
•Induction hardened cutting knives for long life
•Heavier design for greater cutting power
•Extended handles provide added reach and leverage
ITEM #
MODEL
707679
D203-8
OVERALL
JAW
JAW
JAW
KNIFE
POINT
WEIGHT
LENGTH LENGTH WIDTH THICKNESS LENGTH THICKNESS HANDLE (LBS)
8-7/16"
2-5/16"
1"
(214 mm) (59 mm) (25 mm)
1/2"
(13 mm)
5/8"
(16 mm)
1/8"
(3 mm)
PlasticDipped
Yellow
.60
KLAW™ PUMP
•Push button and quick ratchet feature allows for fast and easy adjustment to
any position
•Compact, narrow design for easy work in small or hard to reach spaces
• Gripping surfaces with specially hardened teeth for reduced wear and positive gripping
• Exended grips for added comfort
ITEM #
MODEL
707688
D504-12B
OVERALL
LENGTH
MAX. JAW
CAPACITY
HANDLE
WEIGHT
12-1/2"
(318 mm)
2-3/4"
(70 mm)
Plastic-Dipped
Yellow
1.20 lbs.
(0.54 kg)
Quick-Adjust Pump Pliers:
Push button
feature allows for fast and easy
adjustment to any position.
Push button
Quick-Adjust
Pump Pliers:
feature allows
for fast and easy
Push button
feature allows for fast and easy
adjustment
to
adjustment
to any position.
any position.
PUMP
•Secure tongue and groove design for non-slip grip – even with heavy pressure
•Wide range of versatile jaw positions
ITEM #
MODEL
707678
D502-10
OVERALL
LENGTH
MAX. JAW
CAPACITY
HANDLE
10"
(254 mm)
1-3/4"
(45 mm)
Plastic-Dipped
Yellow
WEIGHT
(LBS)
.97
– E.&O.E. – All Prices F.O.B. Our Warehouse – Subject to Change Without Notice –­ All Taxes Extra – May not be Available at All Branches –
ECCO Supply™
www.eccosupply.ca 14-3
Revised: July 2016 • Replaces: August 2015
KLEIN TOOLS
www.kleintools.com
SNIPS
AVIATION
•Journeyman snips cut 18 gauge cold rolled steel and 22 gauge
stainless steel
•Long-lasting serrated forged steel blades for superior strength and
durability
• Self opening latch
• Soft touch grips for maximum control and comfort
• Premium corrosion resistant plated handles
J1101R
J1100L
ITEM #
MODEL
CUTTING
PATTERN
SNIP TYPE
CUTTING
LENGTH
COLOR
CODE
OVERALL
LENGTH
WEIGHT
(OZ)
707358
J1100L
Left/Straight
Aviation
1-3/8" (35 mm)
Red/Black
14.4
707357
J1101R
Right/Straight
Aviation
1-3/8" (35 mm)
Green/Black
9-7/8"
(250 mm)
9-7/8"
(250 mm)
14.7
OFFSET
•Exclusive Klein Kurve™ handles for natural hand positioning and
ease of use.
•J2100L and J2101R Journeyman snips cut 18 gauge cold rolled
steel and 22 gauge stainless steel.
•Long-lasting serrated forged steel blades for superior strength
and durability
• Self opening latch
• Soft touch grips for maximum control and comfort
• Premium corrosion resistant plated handles
J2101R
J2100L
ITEM #
MODEL
CUTTING
PATTERN
SNIP TYPE
CUTTING
LENGTH
COLOR
CODE
OVERALL
LENGTH
WEIGHT
(OZ)
707356
J2100L
Left/Straight
Offset
1-1/4" (32 mm)
Red/Black
15.5
707355
J2101R
Right/Straight
Offset
1-1/4" (32 mm)
Green/Black
9-1/2"
(241 mm)
9-1/2"
(241 mm)
15.7
CABLE CUTTERS — HIGH-LEVERAGE
•High-leverage design for exceptional cutting capability
•Precision, one-hand shearing action
•Cable-gripping shear-type jaws
•Perfect for working in confined spaces
•Can be carried in most tool pouches
• Do NOT use to cut steel or ACSR
ITEM #
MODEL
707641
63050
OVERALL
LENGTH
MAX. CABLE CUTTING CAPACITY
HANDLE
WEIGHT
(LBS)
9-1/2"
(241 mm)
4/0 aluminum, 2/0 soft copper,
100-pair 24 AWG communications cable
Red
.90
– E.&O.E. – All Prices F.O.B. Our Warehouse – Subject to Change Without Notice –­ All Taxes Extra – May not be Available at All Branches –
14-4 www.eccosupply.ca
ECCO Supply™
Revised: July 2016 • Replaces: August 2015
KLEIN TOOLS
www.kleintools.com
CRIMPING/CUTTING TOOL — NON-INSULATED/INSULATED CONNECTORS
•
•
•
•
•
•
Accommodates wire from No. 10 to 22 AWG
Specially hardened wire cutter in nose
Tapered nose design for working in confined spaces
Crimping die marked for insulated and non-insulated solderless terminals and connectors
Plastic-dipped, cushioned handles for comfort
Hot-riveted joint for smooth action and no handle wobble
ITEM #
MODEL
707640
1005
CRIMPS
OVERALL LENGTH
HANDLE
WEIGHT (LBS)
10-22 AWG
9-3/4" (248 mm)
Red
.80
5-BLADE CRIMPER
•Produces factory-precision indentations in stove pipe and round duct with just a
squeeze
•Compound-leverage mechanism, heavy-duty jaw/handle linkage, and closing stop
provide easy operation and consistent crimps for virtually leak-proof connections.
•Hardened steel handles include hand guards covered with vinyl grips for added comfort
and easy operation.
•All steel construction and nickel-plating provide long life and consistent crimp profile
ITEM #
MODEL
707360
86550
OVERALL LENGTH
HANDLE
WEIGHT (LBS)
9" (229 mm)
Blue
1.0
DUCT SLITTING TOOL
•Blade used to scribe a line or pierce and enlarge holes in sheet metal.
•Cushion-grip handle for greater comfort and control
• Tip-Ident™ quickly identifies the type of tool and tip orientation
ITEM #
MODEL
707362
DS7
OVERALL LENGTH
WEIGHT (OZ)
12-5/8" (321 mm)
5.6
HAND NOTCHER
•Allows quick, clean, 30° “V” shaped cuts in sheet metal
• Drop-forged, high-impact steel jaw with 13/16" (21 mm) maximum throat depth
• Jaws’ hook design allows easy notching of corners and take-off tabs without slippage
•All steel construction with nickel-plate and black-oxide finish provides long life and durability
•Hardened steel handles include hand guards and are covered with vinyl grips for added
comfort and easy operation.
ITEM #
MODEL
707361
86551
OVERALL LENGTH
HANDLE
WEIGHT (LBS)
8-1/2" (216 mm)
Blue
1.0
– E.&O.E. – All Prices F.O.B. Our Warehouse – Subject to Change Without Notice –­ All Taxes Extra – May not be Available at All Branches –
ECCO Supply™
www.eccosupply.ca 14-5
Revised: July 2016 • Replaces: August 2015
KLEIN TOOLS
www.kleintools.com
WIRE STRIPPER/CUTTER
• Compact, lightweight wire-stripping and cutting tool
• Narrow nose fits into tight places
• Hardened steel with precision ground stripping holes
• Do NOT use for cutting steel wire or bolts
• Spring-loaded action for self-opening
• Precision-ground stripping holes for easy removal of insulation
• Easy-to-read wire gauge markings on both sides for stripping in either direction
• Black-oxide finish resists corrosion
• Colour-coded handles: red indicates stranded wire, yellow indicates solid wire
• Textured handles provide a firm, comfortable grip
• Wire looping and bending holes
ITEM #
MODEL
707639
11045
OVERALL LENGTH
STRIPS AND CUTS
HANDLE
WEIGHT (LBS)
6-1/4" (159 mm)
10 – 18 AWG solid
(4.0 – .75 mm²)
Yellow
.27
TUBE CUTTERS
PROFESSIONAL MINI
• Perfect for tight space cutting – requires only 1-3/8" swing radius
• Smooth feed mechanism for precise, right angle cutting action
• Not designed for cutting stainless steel or hard tempered tubing
ITEM #
MODEL
707380
88977
CUTS
OVERALL LENGTH
WEIGHT (OZ)
1/8" – 5/8" O.D. tubing
1-3/4" (44 mm)
2.5
PROFESSIONAL
• Accurate 4 roller tracking system – no spiraling
• Professional reaming tool
• Extra cutting wheel included
ITEM #
MODEL
707379
88904
CUTS
HANDLE
WEIGHT
(LBS)
1/8" - 1-3/8" steel and
copper tubing
Orange
1.31
– E.&O.E. – All Prices F.O.B. Our Warehouse – Subject to Change Without Notice –­ All Taxes Extra – May not be Available at All Branches –
14-6 www.eccosupply.ca
ECCO Supply™
Revised: July 2016 • Replaces: August 2015
KLEIN TOOLS
www.kleintools.com
MULTI-PURPOSE TOOL — LONG-NOSE
• Easily cuts and strips wire
• Narrow, serrated plier nose to pull, loop and bend wire
• Long, curved cutting blade
• Cutters and strippers are in front of the pivot for maximum ease-of-use in reaching into
tight places
• Crimps insulated and non-insulated terminals and 7 to 8 mm ignition terminals
• Cleanly shears bolts
• Plastic-covered cushioned handles for comfort
ITEM #
MODEL
707638
1010
OVERALL
LENGTH
BOLT SIZE
STRIPS AND
CUTS
4-40, 5-40, 6-32, 8-32, 8-1/4" (210 mm)
10-32, 10-24
HANDLE
WEIGHT
(LBS)
Blue
.43
10 – 22 AWG
(4.0 – .34 mm²)
WRENCHES — ADJUSTABLE
HIGH CAPACITY
• Extra capacity allows use of a smaller size wrench to handle bigger jobs, especially in
confined spaces
• Forged heat-treated alloy steel for maximum strength and light weight
ITEM #
MODEL
LENGTH
CAPACITY
HANDLE
WEIGHT
707673
D507-6
6-1/2" (165 mm)
15/16" (24 mm)
707686
D507-8
8-1/4" (209 mm)
1-1/8" (28 mm)
707680
D507-10
10-1/4" (260 mm)
1-5/16" (33 mm)
Plastic-Dipped
Transparent Red
Plastic-Dipped
Transparent Red
Plastic-Dipped
Transparent Red
.29 lbs
(0.14 kg)
.66 lbs.
(0.30 kg)
1.11 lbs.
(0.50 kg)
EXTRA WIDE JAW
• Extra wide 1-1/2" jaw provides same capacity as a standard 12" adjustable wrench
• Forged heat-treated alloy steel for maximum strength and light weight
ITEM #
MODEL
LENGTH
CAPACITY
HANDLE
WEIGHT
707687
D509-8
8-1/2" (216 mm)
1-1/2" (38 mm)
Plastic-Dipped Solid
Blue
.77 lbs.
(0.35 kg)
WRENCHES — RATCHETING REFRIGERATION
• Fully reversible ratchet wrenches designed for refrigeration packing gland nuts and
valve stem sockets
• Wrenches are compact in size, with clearly marked sockets for four nut sizes
• Also designed for beam-clamp installation
• Quick-flip reversing lever permits instant ratchet reversal
• Wrenches are ruggedly built and have polished chrome finish with smooth edges for comfort
ITEM #
MODEL
707664
68310
SOCKET SIZES
LENGTH
WEIGHT
(LBS)
3/16" and 5/16" sq × 1/4" and 3/8" sq
5-1/2" (140 mm)
.20
– E.&O.E. – All Prices F.O.B. Our Warehouse – Subject to Change Without Notice –­ All Taxes Extra – May not be Available at All Branches –
ECCO Supply™
www.eccosupply.ca 14-7
Revised: July 2016 • Replaces: August 2015
KLEIN TOOLS
www.kleintools.com
SCREWDRIVERS
KEYSTONE-TIP — HEAVY-DUTY SQUARE-SHANKS
• Heavy-duty square shank for wrench-assisted turning
• Bolster reinforces shank for hard use
• Designed for the most demanding uses
ITEM #
MODEL
707648
600-4
SHANK TIP WIDTH
SHANK LENGTH
OVERALL LENGTH
WEIGHT (LBS)
1/4" (6 mm)
4" (102 mm)
8-11/32" (212 mm)
.25
CABINET-TIP — ROUND-SHANKS
• Narrow cabinet-tip permits blade access where space is limited
ITEM #
MODEL
707429
707650
707431
601-4
601-6
601-8
SHANK TIP WIDTH
SHANK LENGTH
OVERALL LENGTH
WEIGHT (LBS)
3/16" (5 mm)
3/16" (5 mm)
3/16" (5 mm)
4" (102 mm)
6" (152 mm)
8" (203 mm)
7-3/4" (197 mm)
9-3/4" (248 mm)
11-3/4" (298 mm)
.15
.15
.20
PROFILATED PHILLIPS-TIP — ROUND-SHANKS
• Tips are precision-machined to provide a more consistent geometric symmetry
than conventional Phillips-tip screwdrivers
• Provides accurate fit and torque without slippage
ITEM #
MODEL
POINT SIZE
SHANK LENGTH
OVERALL LENGTH
WEIGHT (LBS)
707652
707655
603-4
603-10
No. 2
No. 2
6" (152 mm)
10" (254 mm)
11" (279 mm)
14-5/16" (364 mm)
.35
.35
SQUARE-RECESS TIP — ROUND-SHANKS
• Colour-coded handle ends for quick and easy identification
• Round shank with square-recess tip
• Chrome plated shank for corrosion resistance
ITEM #
MODEL
707643
707645
707646
707647
707649
707651
661
662
663
665
666
667
POINT
SIZE
COLOUR
CODE
SHANK LENGTH
OVERALL LENGTH
WEIGHT (LBS)
No. 1
No. 2
No. 3
No. 1
No. 2
No. 3
Green
Red
Black
Green
Red
Black
4" (102 mm)
4" (102 mm)
4" (102 mm)
8" (203 mm)
8" (203 mm)
8" (203 mm)
7-3/4" (197 mm)
8-1/4" (210 mm)
8-1/4" (210 mm)
11-3/4" (298 mm)
12-1/4" (311 mm)
12-1/4" (311 mm)
.20
.30
.30
.30
.40
.40
DEMOLITION
•Engineered, manufactured and tested for prying, chiseling and punching
• Plated metal strike cap to protect handle from hammer blows
•Heat treated metal shaft runs complete length of handle to metal
strike cap to transfer metal strike force.
ITEM #
MODEL
TIP TYPE
TIP SIZE
BLADE LENGTH
OVERALL LENGTH
WEIGHT (LBS)
707642
707644
602-4DD
602-7DD
Keystone
Keystone
1/4" (6 mm)
5/16" (8 mm)
4" (102 mm)
7" (178 mm)
9" (229 mm)
12-3/8" (314 mm)
.37
.56
– E.&O.E. – All Prices F.O.B. Our Warehouse – Subject to Change Without Notice –­ All Taxes Extra – May not be Available at All Branches –
14-8 www.eccosupply.ca
ECCO Supply™
Revised: July 2016 • Replaces: August 2015
KLEIN TOOLS
www.kleintools.com
SCREWDRIVERS (cont’d)
MULTI-BIT SCREWDRIVER/NUT DRIVER — 11-IN-1
• Integrated screwdriver/nut driver shaft holds 8 popular
tips and converts to 3 nut driver sizes
ITEM #
MODEL
DESCRIPTION
WEIGHT (LBS)
707653
32500
11-in-1
Contains: 3/16" (5 mm), 1/4" (6 mm), #1, #2, T10, T15, #1, #2, 1/4",
5/16", 3/8"
.50
NOTE: TORX® is a registered trademark of Acument Intellectual Properties, LLC.
4-PIECE MINIATURE CUSHION-GRIP SET
• Precision tips for exact fit and rigorous applications
Set Contains
MODEL TIP TYPE SIZE SHANK TIP SIZE SHANK LENGTH OVERALL LENGTH
604-3
606-2
607-3
608-3
Phillips
Keystone
Cabinet
Cabinet
ITEM #
MODEL
707668
85484
No. 0
1/16" (1.6 mm)
3/32" (2.4 mm)
1/8" (3.2 mm)
3" (76 mm)
2" (51 mm)
3" (76 mm)
3" (76 mm)
5-3/4" (146 mm)
4-3/4" (121 mm)
5-3/4" (146 mm)
5-3/4" (146 mm)
WEIGHT (LBS)
.14
MAGNETIC — WITH 32-PIECE TAMPERPROOF BIT SET
• Cushion-Grip handle for superior torque and comfort
• Sturdy bit and screw holding magnet allows for screws to fit securely in place for easy use
• Includes complete tamperproof bit set in block
Bits Included
• TORX® – T7, T8, T10, T15, T20, T25, T27, T30 and T40
• Fraction Hex – 3/32", 7/64", 1/8", 9/64", 5/32", and 3/16"
• Metric Hex – 2 mm, 2.5 mm, 3 mm, 4 mm, and 5 mm
• Spanner – 4, 6, 8, and 10
• Tri-Wing® – 1, 2, 3 and 4
• TORQ-SET® – 6, 8 and 10
• 1/4" (6 mm) square to 1/4" (6 mm) hex adapter to drive sockets
ITEM #
MODEL
707654
32510
WEIGHT (LBS)
.71
NOTE: T ORX® is a registered trademark of Acument Intellectual Properties, LLC.
TORQ-SET® and Tri-Wing® are registered trademarks of Phillips Screw Co.
– E.&O.E. – All Prices F.O.B. Our Warehouse – Subject to Change Without Notice –­ All Taxes Extra – May not be Available at All Branches –
ECCO Supply™
www.eccosupply.ca 14-9
Revised: July 2016 • Replaces: August 2015
KLEIN TOOLS
www.kleintools.com
NUT DRIVERS
CUSHION-GRIP HOLLOW-SHAFT — 3" SHAFTS
• Standard length for most applications
• Fits over long bolts and studs
ITEM #
MODEL
COLOUR
CODE
HEX SIZE
SHAFT LENGTH
OVERALL LENGTH
WEIGHT (LBS)
707656
630-1/4
Red
1/4"
3" (76 mm)
6-3/4" (171 mm)
.20
COLOUR
CODE
HEX SIZE
SHAFT LENGTH
OVERALL LENGTH
WEIGHT (LBS)
Yellow
Blue
5/16"
3/8"
3" (76 mm)
3" (76 mm)
6-3/4" (171 mm)
6-3/4" (171 mm)
.20
.20
WITH MAGNETIC TIP
• Full hollow-shaft for long bolts or studs
ITEM #
MODEL
707661
707663
630-5/16M
630-3/8M
2-PIECE STUBBY SET — 1-1/2" SHAFTS — MAGNETIC TIP
• Full hollow shaft for long bolts or studs, with magnetic tip
•Cushion-Grip
• Stubby nut drivers allow for work in close quarters
Set Contains
MODEL
610-1/4M
610-5/16M
COLOUR CODE
HEX SIZE (")
SHAFT LENGTH
OVERALL LENGTH
Red
Yellow
1/4
5/16
1-1/2" (38 mm)
1-1/2" (38 mm)
3-1/2" (89 mm)
3-1/2" (89 mm)
ITEM #
MODEL
707665
610M
WEIGHT (LBS)
.20
2-PIECE MAGNETIC TIP CUSHION-GRIP SETS
• General-purpose selection of the most frequently used nut drivers
646M Set Contains
MODEL
646-1/4M
646-5/16M
COLOUR CODE HEX SIZE (") SHAFT LENGTH
Red
Yellow
ITEM #
MODEL
707660
646M
1/4
5/16
6" (152 mm)
6" (152 mm)
OVERALL LENGTH
9-3/4" (248 mm)
9-3/4" (248 mm)
WEIGHT (LBS)
.50
– E.&O.E. – All Prices F.O.B. Our Warehouse – Subject to Change Without Notice –­ All Taxes Extra – May not be Available at All Branches –
14-10 www.eccosupply.ca
ECCO Supply™
Revised: July 2016 • Replaces: August 2015
KLEIN TOOLS
www.kleintools.com
HEX-KEY SETS
GRIP-IT™
• Blades rotate independently up to 270°
• Precision fit so hex tool end reduces stripping problems. Keys are industrial strength,
impact-resistant and tested for performance to below freezing
• Glass-reinforced nylon handle
• Hex ends are square-cut for a secure full-depth fit and maximum contact with the hex
socket to prevent slippage and stripping of the socket (Cat. Nos. 70570, 70573, 70574, and
70575)
ITEM #
MODEL
DESCRIPTION
707685
70575
Hex Sets – 9 inch .050", 1/16", 5/64", 3/32", 7/64", 1/8",
sizes
9/64", 5/32", 3/16"
SIZES
COLOUR
WEIGHT (LBS)
Yellow
.20
RARE EARTH MAGNETIC TORPEDO LEVEL
• Powerful rare earth magnets,10x stronger than strip magnets, hold firmly to iron and steel surfaces
• Three acrylic vials – plumb, level and 45° provide the necessary jobsite
measurements
• Top read level window simplifies viewing in tight areas
ITEM #
MODEL
OVERALL LENGTH
WEIGHT
707672
931-9RE
9" (229 mm)
.42 lbs. (0.19 kg)
UTILITY KNIFE — FOLDING
• Push button to easily open and close
• High quality triple ground blades stay sharp longer
• Rubber grips on handle for improved control and comfort
• Heavy-duty, durable construction
ITEM #
MODEL
LENGTH CLOSED
OVERALL LENGTH WITH BLADE
WEIGHT
707667
44131
4.125" (104.8 mm)
4.50" (114.3 mm)
.27 lbs. (0.12 kg)
UTILITY KNIFE BLADES
• Heavy-duty razor-edged blades
• Universal size fits Klein and most other makes of utility knives
• Blades are reversible for extra life
• Blades made in the U.S.A.
ITEM #
MODEL
707669
44101
BLADE SIZE
PACKAGE SIZE
WEIGHT (LBS)
2-7/16" × .025" (62 mm × 6 mm)
5 Blades
.05
– E.&O.E. – All Prices F.O.B. Our Warehouse – Subject to Change Without Notice –­ All Taxes Extra – May not be Available at All Branches –
ECCO Supply™
www.eccosupply.ca 14-11
Revised: July 2016 • Replaces: August 2015
KLEIN TOOLS
www.kleintools.com
VOLTAGE TESTERS — NON-CONTACT (NCVT-1/NCVT-2)
• Non-contact detection of standard voltage in cables,
cords, circuit breakers, lighting fixtures, switches, outlets,
and wires
• High intensity, bright green LED indicates the tester is
NCVT-1
operational and aids in illuminating the workspace
• Digitally controlled ON/OFF power button
• Auto power-off feature conserves and extends battery life
• Microprocessor controlled low-battery indicator
• CAT IV 1000 Volt safety rating provides expanded
operation and protection
• Lightweight durable polycarbonate plastic resin construction with a convenient pocket-clip
• 9.8 ft. (3 m) drop protection
• Does NOT detect DC voltage
NCVT-2
Additional Features for Dual Range NCVT2
• Automatically detects and indicates low voltage (12-48 Volts AC) and standard voltage (48-1000 Volts
AC), allowing broad application
• Non-contact detection of low-voltage in security, entertainment, communications, environmental
control, and irrigation systems
ITEM #
MODEL
707682
707684
NCVT-1
NCVT-2
VOLTAGE RANGE
Audible
Visual
MODEL
NCVT-1
NCVT-2
12 TO 48 VOLTS AC (LOW) (NCVT2 ONLY) 48 TO 1000 VOLTS AC (STANDARD)
Low-Pitched Pulsing Beeping Sound
Green LED Turns OFF and Red LED Blinks
(approximately 2 times per second).
High-Pitched Continuous Beeping Sound
Green LED Turns OFF and Red LED
illuminates continuously.
VOLTAGE FREQUENCY POLLUTION
OVERALL
RANGE
RANGE
DEGREE
BATTERIES LENGTH WIDTH HEIGHT WEIGHT
50-1000
volts AC
12-1000
volts AC
50-500 Hz
2
2 × AAA
50-500 Hz
2
2 × AAA
5.50"
0.72"
1.0"
(140 mm) (18 mm) (25 mm)
5.50"
0.72"
1.0"
(140 mm) (18 mm) (25 mm)
0.8 oz.
(23 g)
0.8
(23 g)
WEIGHT W/
BATTERIES
1.6 oz.
(46 g)
1.6 oz.
(46 g)
– E.&O.E. – All Prices F.O.B. Our Warehouse – Subject to Change Without Notice –­ All Taxes Extra – May not be Available at All Branches –
14-12 www.eccosupply.ca
ECCO Supply™
Revised: July 2016 • Replaces: August 2015
KLEIN TOOLS
www.kleintools.com
CLAMP METERS — PROFESSIONAL SERIES
• Large jaw sizes
• Worklights illuminate dark work spaces
• Data hold captures measurements in any situation
Additional Features for Models CL2000, CLCL2200, CL2300, CL2500
• Measures DC current
• True RMS measurements for accurate readings of all signals
• Built-in magnetic mount for hands-free convenience
• Non-contact voltage detection at the push of a button
•Quick-response bar graph shows elusive fluctuations
ITEM #
MODEL
770046
770044
CL200
CL2000
MODEL
CL200
CL2000
CAT
RATING
CAT III
600V
CAT III
600V
CL200
BATTERIES
JAW SIZE
HEIGHT
WIDTH
DEPTH
WEIGHT
3 × AAA
1.0"
(25 mm)
1.25"
(32 mm)
8.2"
(208 mm)
8.875"
(225 mm)
3.0"
(76 mm)
3.375"
(86 mm)
1.4"
(36 mm)
1.5"
(38 mm)
10.0 oz.
(283 g)
10.7 oz.
(303 g)
2 × AAA
CL2000
INCLUDED
ACCESSORIES
test leads, case,
thermocouple
test leads, case
BORESCOPE
• Use the borescope to view inaccessible areas
•Features a durable camera snake, a high resolution screen, mirror image
and an adjustable LED work light.
• IP67: Dustproof and waterproof camera
ITEM #
MODEL
BATTERIES
HEIGHT
WIDTH
DEPTH
WEIGHT
707690
ET510
Lithium Ion
6.53"
(166 mm)
2.84"
(72 mm)
1.55"
(39 mm)
8.08 oz.
(229 g)
Applications:
• Electrical
• HVAC
• Plumbing
• Automotive
• Aircraft
• Use to view inaccessible areas:
- Inside a wall
- Down the drain
- In furnace or vent
ET510
Borescope
ET510
Borescope
Package contents:
• Borescope • 17 mm gooseneck camera
• Rechargeable lithium ion battery
• Mirror camera attachment • Hook camera attachment
• Magnet camera attachment • USB data adapter/charger
• USB power adapter/charger • Instruction manual
– E.&O.E. – All Prices F.O.B. Our Warehouse – Subject to Change Without Notice –­ All Taxes Extra – May not be Available at All Branches –
ECCO Supply™
www.eccosupply.ca 14-13
Revised: July 2016 • Replaces: August 2015
KLEIN TOOLS
www.kleintools.com
TAPE MEASURES — MAGNETIC
•Double-sided rule for measurement while using against wall, ceiling or conduit
•Horizontal and vertical standout for easy one person measurements
•Shock and impact resistant case
• 93275 features both centimeters and inches on both sides of blade
ITEM #
MODEL
707671
93275
BLADE LENGTH
HOOK
WEIGHT
25'
(7.5 m)
Double
.94 lbs.
(0.43 kg)
*Magnetic strength will vary with different types of metal surfaces.
TIE-WIRE REEL
• Klein’s redesigned tie-wire reel allows loading tie wire onto the reel without having to remove
the cover
•Rugged, lightweight reel is smooth aluminum alloy with wear parts made of steel
•Feeds pre-coiled wire smoothly, easily and quickly to save time and reduce wasted wire
•Designed for left or right hand use
•Large, comfortable rewind knob
ITEM #
MODEL
707423
27400
DIAMETER
WIDTH
WEIGHT (LBS)
6-1/4"
(159 mm)
2-25/32"
(71 mm)
2.35
BEVERAGE TOOL
• Suitable for users from the apprentice to the demanding professional
• Cushion-Grip handle resists slippage and provides the comfort needed for frequent use
• Bottle cap Tip-Ident®, allows for quick identification in tool pouches or crowded drawers
• Professionally designed and rigorously tested by an expert team to handle both foreign
and domestic applications
• High-quality stainless steel construction
ITEM #
MODEL
DESCRIPTION
WEIGHT (LBS)
707628
98002BT
Beverage Tool
.25
UTILITY GLOVES
• Moisture wicking and breathable Trek Dry™ stretch material on top with sponge
foam and tricot lining for maximum comfort
• Durable synthetic leather palm
• Reinforced thumb and finger panels add protection and durability
• Wide opening elastic cuff for easy entry
ITEM #
MODEL
SIZE
688305
688304
40205
40206
Medium
Large
WEIGHT
.13 (lbs) .06 (kg)
.13 (lbs) .06 (kg)
*Trek Dry™ is a trademark of Mechanix Wear, Inc.
– E.&O.E. – All Prices F.O.B. Our Warehouse – Subject to Change Without Notice –­ All Taxes Extra – May not be Available at All Branches –
14-14 www.eccosupply.ca
ECCO Supply™
Revised: July 2016 • Replaces: August 2015
KLEIN TOOLS
www.kleintools.com
TRADESMAN PRO™ ORGANIZERS
10 INCH TOTE
Additional Features:
•40 pockets for maximum tool storage
New Features:
•Fully molded bottom to protect from the elements
•Double stitched seams for extra durability
•Resized pockets to better fit tools
•Large zipper pockets for tools and small parts
•Shoulder strap with extra padding
•Longer pockets for screwdrivers
ITEM #
MODEL
LENGTH
WIDTH
HEIGHT
POCKETS
WEIGHT
707627
55416-10-14
10"
(254 mm)
10.25"
(260 mm)
12.25"
(311 mm)
40
5.16 lbs.
(2.34 kg)
ELECTRICIAN’S BACKPACK
Additional Features:
•39 pockets for tons of tool storage
•Wide opening fits power drills, meters, flashlights, etc.
•Large front pocket easily fits cables and tools
New Features:
•Hard molded pocket protects safety glasses, meters, etc.
•Lock bars to keep bag propped open
•Resized pockets to better fit tools
•Shoulder strap with extra padding
•Longer pockets for screwdrivers
ITEM #
MODEL
LENGTH
WIDTH
HEIGHT
POCKETS
WEIGHT
707626
55421-BP-14
14.5"
(368 mm)
7.25"
(190 mm)
20"
(508 mm)
34
5.34 lbs.
(2.42 kg)
– E.&O.E. – All Prices F.O.B. Our Warehouse – Subject to Change Without Notice –­ All Taxes Extra – May not be Available at All Branches –
ECCO Supply™
www.eccosupply.ca 14-15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement