Quick Start Guide

Prestigio MultiPad

PMP7074B3G

1.

Packing List

1. Prestigio MultiPad

3. Carrying Case

5. Quick Start Guide

7. Legal and Safety Notices

2.

Device Overview

3

1

2

13

14

4 5

6

2. AC Adapter

4. USB Cable

6. Warranty Card

10

9

8

7

15

16

11

12

PMP7074B3G EN 1

1

2

3

Power

Quick Start Guide

Prestigio MultiPad

PMP7074B3G

Turn on/off the device; Suspend/Activate the device

Earphone Jack Earphones connection.

Vol +\ Vol - Button Adjust the volume level

4

5

SIM Slot Insert the SIM card

Micro SD Card Slot Insert the Micro SD card

6

7

Built-in Microphone Record sounds or chat with others

Home Back to the Home screen

8

9

Menu

Return

10 Search

11 Reset

Display menu options.

Back to the previous page

Go to Google home search page directly

Reset the device if it fails to operate correctly

12 USB / DC port

13 Front camera lens

USB / DC connection

Take photos

14 Ambient light sensor Induct the changing light

15 Flash lamp Increase light

16 Back camera lens Take photos

Getting Started

3.

Charging

 Insert the AC connector to the DC port on the device and connect the power adapter to the wall socket for charging.

 Normally it takes approximately 3 hours to fully charge the device.

Operating the device while charging with the AC adapter may extend the time of full charging.

Notice: The device cannot be charged via USB.

4.

Power on/Power off

 Press and hold the Power Button to turn on the device. It will automatically enter the Home screen after the start-up screen.

 Press the Power Button once to enter sleep mode and press it again to awake the device.

 Press and hold the Power Button, and then tap on Power

off/Standby to power off the device or to enter sleep mode.

EN – 2 PMP7074B3G

5． Inserting a Memory Card

Quick Start Guide

Prestigio MultiPad

PMP7074B3G

Correct Incorrect

 The device supports micro SD/SDHC cards.

 To insert a Micro SD card, place the card connector towards the front side of the device and the printing side of the card towards the rear side of the device.

 To remove the micro SD card, gently press the edge of the card to release the safety lock and pull the card out of the slot.

 To access the files on the memory card, select File icon and tap on SD

Card.

Notice: When you are reading the file from micro SD card, please don’t remove it, otherwise the device could fail to operate correctly.

6． Inserting a SIM Card

Correct Incorrect

PMP7074B3G EN 3

Quick Start Guide

Prestigio MultiPad

PMP7074B3G

 To insert a SIM card, place the metal side of SIM card towards the front side of the device and the triangular cut of the card will be inserted into the device.

 To remove the SIM card, gently press the edge of the card to release the safety lock and pull the card out of the slot.

Notice: Don’t insert or remove the SIM card while the device is on.

Please insert or remove the SIM card while the device is off.

7. Auto Calibrate

 Please turn off the tablet when you calibrate the touch screen

 Press and hold the Volume “-” button on the right of the device and press and hold the Power button simultaneously to turn on the device.

 Release the Power button when the device vibrates, then release the

Volume “-” button when the “Touch Screen Calibration, Don't Touch

The Screen...OK” displays on the screen.

Notice: Don’t touch the screen during the calibration process.

8. Automatic Upgrade

 If there is a new system version, a system update dialog-box will pop up.

 Click “download” to download new firmware package. ( This process will take a long time, please be patient)

 When finishing to download the new firmware package, click

“installation” to upgrade your firmware.

Notice:

 Ensure that the Micro SD card has been inserted before downloading the new firmware, and the remaining storage of Micro SD card is more than 200MB.

 During automatic updates the charger should always be connected to the device in order to avoid power shortage and as a result interruption of the upgrade process.

 New firmware package should be downloaded in a good 3G or WI-FI network environment.

 During upgrade some user data may be lost (installed applications, call records, etc). Before upgrade please backup the important files.

EN – 4 PMP7074B3G

Quick Start Guide

Prestigio MultiPad

PMP7074B3G

9.

Connecting to Wi-Fi

 Select Settings icon to access the list of options. Select Wireless &

networks.

 If the Wi-Fi is off, tap on and switch it to . Then select the Wi-Fi

settings.

 The device will scan for available Wi-Fi networks and display them at the bottom of the screen.

 Tap on the network you want to connect to. Then tap inside the

Wireless password field to make the virtual keyboard appear. Enter the required network information, tap on Done, and then tap on

Connect.

 Your device will now attempt to establish a connection to the Wi-Fi access point with the network parameters you entered. After connecting to a Wi-Fi network, the icon appears on the status bar

10 on the right side of the Home screen.

.

Using 3G network

 Insert a SIM card, and then select Settings icon to access the list of options.

 Select Wireless & networks, then touch Mobile networks.

 If the Data enabled is off, tap on and switch it to .

 Select Access Point Names, If you find nothing, please touch Menu button. Select New APN option, then fill in the information that you got from the operator of the SIM card.

 Select Network operators option, then select the operator of the

SIM card. The icon appears on the right side of the status bar. You

11 can go on line directly without Wi-Fi now.

.

Transferring content from PC

 Connect the device to your PC/Notebook using the USB cable.

 Select the content you want to transfer from your PC/Notebook.

 Drag the content from the PC/Notebook to the device.

 Please do not disconnect the USB cable during loading. It may cause malfunction of the device and files.

 Left click on to disconnect the device and PC/Notebook safely.

PMP7074B3G EN 5

Quick Start Guide

Prestigio MultiPad

PMP7074B3G

Technical Specifications

Processor

RAM

OS

Display

Resolution

Storage capacity

Battery

Dimensions

Weight

High performance ARM Cortex A8 at 800MHz

512MB DDR2

Android 2.3 (Gingerbread)

7” TFT LCD, Capacitive multi touch

800 x 480 pixels

4 GB flash memory (2.73GB are accessible by user), Memory card slot supports micro SDHC card up to 32 GB

Interfaces

USB 2.0, Sim card, Micro SD (micro SDHC compatible), USB Host

Communications Wi-Fi (802.11 b/g/n), 3G(WCDMA), Bluetooth

GPS On board

GSM Band

Sensor

HSDPA/UMTS 2100/900 MHz

GSM/GPRS/EDGE 850/900/1800/1900 MHz

3-axis-accelerometer

3-axis-compass

Light sensor

4000 mAh Li-Polymer battery

192*122*12.2 （mm）(L x W x H)

460 g

Disclaimer

As the Prestigio products are constantly updated and improved, your device’s software may have a slightly different appearance or modified functionality than presented in this Quick Start Guide.

EN – 6 PMP7074B3G