Wireless-G Router For 3G/UMTS Broadband

Wireless-G Router For 3G/UMTS Broadband
QUICK INSTALLATION
Wireless-G Router for
3G/UMTS Broadband
Package Contents
•
•
•
•
•
•
Wireless-G Router for
3G/UMTS Broadband
Setup CD-ROM
User Guide and Quick Installation on
CD-ROM
AC Power Supply with UK, Euro, and
Australia Plug Adapters
Car Power Adapter
Ethernet Cable
Model No:
WRT54G3GV2-VF
Overview
There are two ways to set up the Router for Internet connection. Select one.
1.
2.
Broadband WAN and 3G/UMTS Broadband
3G/UMTS Broadband Only
Before you begin, make sure that you have the following:
Broadband WAN and 3G/UMTS Broadband
• Activated 3G/UMTS broadband service from Vodafone
• Vodafone 3G/UMTS broadband device service information
• Broadband modem
• Settings for your broadband Internet connection
3G/UMTS Broadband Only
• Activated 3G/UMTS broadband service from Vodafone
• Vodafone 3G/UMTS broadband device service information
A.
B.
Insert the Setup CD-ROM into your
CD-ROM drive. The Setup Wizard
should run automatically, and the
Welcome screen should appear. If it
does not, click your taskbar’s Start
button and select Run. In the Open
field, enter D:\SetupWizard.exe
(where “D” is the letter of your CDROM drive).
Insert the CD
Select your preferred language
from the drop down menu. To
begin installation, click the Click
Here to Start button.
Click Here to Start
Overview
C.
To accept the license agreement,
click Next.
Accept the License Agreement
D.
Make sure the Router is powered
off. Insert the Vodafone 3G/UMTS
Broadband Device into the Router’s
PC Card slot or USB port.
Click Next.
Insert the Vodafone 3G/UMTS Broadband
Device
E.
If you have a cable or DSL
connection, keep the screen’s
default, Yes, and then click
Next. Proceed to the section, “1
Broadband WAN and 3G./UMTS
Broadband”.
If you do not have a cable or
DSL connection, select No on
this screen, and then click Next.
Proceed to the section, “2 3G/UMTS
Broadband Only”.
Add Another Internet Connection
1� Broadband WAN and 3G/UMTS Broadband
A.
Make sure the Router is powered
off. Disconnect the network cable
from your computer. (This is the
cable that connects the computer
to your modem.)
Click Next.
Disconnect the Modem
B.
Connect the cable from the
modem to the Modem port on the
Router. (This is the same cable that
you just disconnected from your
computer in step A.)
Click Next.
Connect the Modem to the Router
C.
Connect the included yellow
network cable to the Ethernet
network port of your computer.
Click Next.
Connect the Network Cable to
the Computer
Broadband WAN and 3G/UMTS Broadband
D.
Connect the other end of the
yellow cable to one of the yellow
Ethernet ports labeled 1-4 on the
side panel of the Router.
Repeat steps C and D to connect
additional computers or other
devices to the Router. (Additional
network cables are not included.)
Click Next.
E.
Connect the Network Cable to the Router
Connect the power adapter to the
Router’s Power port. Plug the cord
into an electrical outlet (if needed,
attach the included, appropriate
power plug adapter).
Click Next.
Connect to Power
F.
The Power LED will flash for about
a minute during the self-test. It will
be solidly lit when the self-test is
complete.
If the Power LED does not stop
flashing, refer to “Appendix A:
Troubleshooting” in the User Guide
on the CD-ROM.
Click Next.
Check the Router’s Status
Broadband WAN and 3G/UMTS Broadband
G.
Follow the on-screen instructions to complete the setup and configuration.
NOTE: For advanced configuration changes, refer to “Chapter 3:
Advanced Configuration” in the User Guide on the CD-ROM.
2�
A.
3G/UMTS Broadband Only
Connect the included yellow
network cable to the Ethernet
network port of your computer.
Click Next.
Connect the Network Cable to
the Computer
B.
Connect the other end of the
yellow cable to one of the yellow
Ethernet ports labeled 1-4 on the
side panel of the Router.
Repeat steps A and B to connect
additional computers or other
devices to the Router. (Additional
network cables are not included.)
Click Next.
C.
Connect the Network Cable to the Router
Connect the power adapter to
the Router’s Power port. Plug the
other end into an electrical outlet
(if needed, attach the included,
appropriate power plug adapter).
Click Next.
Connect to Power
3G/UMTS Broadband Only
D.
The Power LED will flash for about
a minute during the self-test. It will
be solidly lit when the self-test is
complete.
If the Power LED does not stop
flashing, refer to “Appendix A:
Troubleshooting” in the User Guide
on the CD-ROM.
Click Next.
E.
Check the Router’s Status
Follow the on-screen instructions to complete the setup and configuration.
NOTE: For advanced configuration changes, refer to “Chapter 3:
Advanced Configuration” in the User Guide on the CD-ROM.
Notes
10
8041410NC-DF
Vodafone
Mobile
Phone
Email
Australia
1555
+355 69 144
www.vodafone.al/mobileconnect
France
900
+33 6 1000 1900
www.sfr.fr
Germany
1234
+49 800 172 1234
www.vodafone.de
Greece
1399
+30 6944 40 1399
www.vodafone.gr
Ireland
1850 287 000
+353 429331999
www.vodafone.ie/business
Italy
42005
800-100195
www.vodafone.it
Netherlands
1200
+31 654 500 100
www.vodafone.nl
New Zealand
0800-921-021 +64 9 355 2007
www.vodafone.co.nz/3grouter
Portugal
1214
+351911214000
www.vodafone.pt
Spain
122
+34 607 122 000
www.empresas.vodafone.es
Sweden
222
+46 708 222 222
www.telenor.se
United
Kingdom
191
+44 7836 191 191
www.vodafone.co.uk/
mobileconnect
For contact details or to get support for your Vodafone Mobile Connect card, reference the
Vodafone Customer Contact document that came with the 3G/UMTS broadband router. For
additional information or troubleshooting help, refer to the User Guide on the Setup CD-ROM.
Website
www.support.vodafone.com or www.linksys.com/vodafone.
Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S.
and certain other countries. Copyright © 2008 Cisco Systems, Inc. All rights reserved. Other brands
and product names are trademarks or registered trademarks of their respective holders.
3240-00397
www.linksys.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising