Is that a headset from BSW in your studio or are you just happy to

Is that a headset from BSW in your studio or are you just happy to
A. ATH-M20
Smooth-Sounding, Affordable Headphones
C. ATH-M35
B. ATH-M30
List $89.00
List $119.00
List $139.00
D. ATHM40FS Coiled cable
F. ATHM50S Straight cable
When you think of a headphone standard, the
only one that truly qualifies is the Sony MDR
7506. It is a best-seller at BSW and delivers a
wide frequency response of 10 Hz–20 kHz in a
comfortable, sealed-ear format that provides
excellent isolation. Includes a miniplug
connector with 1/4" screw-on adapter and low
24 ohm impedance.
E. ATH-M50
List $150.00 $79.00
List $199.00 $159.00
List $199.00 $159.00
Industry-Favorite Studio
These headphones from Audio-Technica offer sonic accuracy
and long-term comfort while appealing to any budget. The
economical ATHM20 provides large 40 mm drivers, each with
a neodymium magnet structure, an adjustable cushioned
headband and an 1/8" (plus 1/4" adaptor) connector on 10
ft. coiled cable. The ATHM30 boasts excellent isolation, a 1/4"
adapter and a 20 Hz–20 kHz freq. response with a 65 ohms
impedance. The new ATH-M35 headphones boast a balanced,
articulate sound with impressive power handling. 65 ohms
impedance. The sealed-ear ATHM40fs has rotating ear pads for
one-ear monitoring, a flat frequency response with a vast 5 Hz–28
kHz range, a hard-wired 1/4" connector and 60 ohms impedance.
The top-of-the-line, ATHM50 delivers extremely accurate
response. Sophisticated driver technology give you exceptional
power handling and very high SPL capabilities while maintaining
clarity of sound throughout their extended range. 15 Hz–28 kHz
range and 38 ohms impedance. See them all online.
List $130.00
3-Pack of Audio-Technica
ATH-M3X Headphones
The Audio-Technica ATHM3X features high
performance drivers and low-mass diaphragms,
maximized power handling capability, excellent
isolation and powerful bass. Frequency response is
20 Hz–21 kHz and impedance is 32 ohms. The cable
is 9.8 ft. and terminated with a miniplug (1/4" adapter
List $49.95 $25.95
ATHM3X-PKG (pack of 3) Contact BSW For Lowest Prices
Closed Back Headphones
Studio Monitors For Your Head
This dynamic, closed-back headphone
from AKG offers great performance, wide
frequency range, maximum input power
of 200 mW and a rated impedance of 032
ohms, making it ideal for applications
that requires minimal audio leakage from
the headphone, or for isolation in a loud
listening environment. Features leatherette
earpads for extended wearing comfort.
The closed-back K 77 gives you solid bass
response with clean highs and a frequency
range of 18 Hz to 20 kHz.
KRK delivers the sonic signature of their famous monitors
right inside their headphones! No more guessing when
switching from between speakers and headphones.
KNS 6400:
• Closed-back around-the-ear design for excellent High-efficiency Neodymium 40mm drivers
• Accurate, natural and wide 10Hz - 22kHz frequency response
• Voiced to remain true to the character of KRK's class leading
studio monitors
KNS 8400:
KNS 8400
• Same features but offers a wider 5Hz-23kHz
frequency response
KNS-6400 List $129.00
KNS-8400 List $199.00
Contact BSW For Lowest Prices
The AKG K240s headphone has an
integrated semi-open air design and
around-the-ear pads for hours of comfort.
This dynamic, semi-open headphone boasts Varimotion technology
and XXL transducers to deliver great sensitivity, wide dynamic range
and high SPL. 55 ohms impedance. The circumaural K 240 MK II has 15
Hz - 25 kHz frequency range. Lightweight and comfortable, it is a true
"all-day" headphone, and a favorite of recording studio and broadcast
engineers for decades.
• Accurate reproduction at all listening
• 55 ohm impedance
• Single-sided, detachable cable
K240MKII List $269.00
Contact BSW For Lowest Prices
This professional headphone from AKG features innovative Varimotion
speakers for absolutely realistic sound and offers an extra wide
frequency range, 55 ohm impedance and maximum input power of
200 mW. The comfortable, circumaural K 271 MK II dynamic headphone
boasts a closed-back design for maximum isolation from ambient noise
and delivers a clean, smooth and very rich sound. It sports a switch in
the headband that mutes the audio just as soon as the headphones are
taken off, keeping sonic bleed completely at bay.
List $279.00
Contact BSW For Lowest Prices
Crystal Clear Sound
Great Sensitivity, Wide Frequency Response
Clean, Smooth Sound
List $59.99
Is that a
from BSW in
your studio
or are you
just happy
to see me?
Depend on BSW for the Best Selection and Lowest Prices
List $165.00
Got A Lot Of Heads To Cover In Your Studio?
Studio Headphones
You’re Covered with BSW. Sennheiser
5-Pack Just $8900
Compact Design, Big Sound
The Sennheiser HD280 Pro closed-ear headphone boasts superb
audio quality and a collapsible design with swiveling ear cups for
maximum flexibility.
Go green, save green. A huge customer favorite, our 5-pack
of HD202 headphones (and single headphone) now come in
bulk packaging to keep your cost down (and landfills less full).
• Sealed-ear design, minimal sound leakage
• Neodymium magnets
• 18 Hz-18 kHz frequency range
• 1/8” mini connector with 1/4” adaptor, 10-foot cord
• 32-ohm impedance
HD202PKG (pack of 5)
List $149.75
List $39.95
• Dynamic stereo headphone
• Accurate, linear sound reproduction
• 64-ohm impedance
• Wide 8 Hz–25 kHz frequency response
• Up to 32 dB of ambient noise attenuation
• Single-sided, coiled cable with miniplug
and locking 1/4" adapter
List $149.95
Contact BSW For Lowest Prices
Rugged, Affordable
Studio Headphone
The Koss PRO4AAT
headphone is rugged
enough for radio jockeys,
but priced for any
budget. The closedear design delivers
maximum bass
and isolation.
Features: wide
response of 10 Hz-25 kHz; titanium-coated high
polymer diaphragms for accurate sound; coiled,
single-entry 8 ft. cable; 3.5 mm miniplug with 1/4"
adapter; impedance 250 ohms.
List $99.99
Great Sounding
Headphones at
Great Prices
Sony makes some
of the most popular
headphones in the
world, and at these low
prices now is the time
to replace your old,
battered set. All models
include a miniplug
connector with 1/4"
screw-on adapter and
low 24 ohm impedance.
The 7502 is a favorite economy
headphone with surprisingly rich sound.
Frequency response is 60 Hz–16 kHz.
List $65.00
Wide Frequency
The Koss UR29 headphone
offers a closed-ear design for
maximum bass and isolation,
collapsible construction for
maximum portability, and
a wide frequency response
of 18 Hz-20 kHz. Features:
accurate sound, with deep
bass and clear, precise treble
response; single-entry 8 ft. cable; 3.5
mm miniplug (no 1/4" adapter); volume
control on cable; impedance 100 ohms.
List $29.99 $
Get Extension Cables!
HPE325 is a 25 ft. straight cable. We also have
minijack extension cables.
HPE325 25' straight 1/4"–1/4" (F) $7.99
MHE-310 10' straight 1/4"–1/8" (F) $5.99
Headphones Handle Any Application
Shure SRH headphones offer plenty of performance in a
choice of four models to meet most any need.
The SRH240 boasts a wide frequency range for full bass
with detailed highs.
The SRH440 offers an enhanced frequency response
to deliver accurate audio reproduction and sports an
adjustable headband with collapsible construction.
The premium SRH840 is ideal for critical listening and
professional recording. Its precisely tailored frequency
response delivers rich bass, clear mid-range and extended
highs. It too provides an ergonomic fit and collapsible
design for comfort and portability.
The SRH750DJ professional DJ headphones offer high
impedance and maximized power handling optimize
the headphones for use on high-output DJ mixers.
Comfortable, padded ear cups swivel 90 degrees
and allow easy placement on one ear when mixing.
Replaceable cable and included set of replacement ear
pads ensure a long-lasting lifetime of use.
List $75.00
List $125.00
List $250.00
List $188.00
Contact BSW For Lowest Prices
1·800·426·8434 • • [email protected]
For more than 80 years Shure rugged, professional audio products have been defined by a legacy of legendary
performance. From the SM7B, a staple in broadcasting, to the SM58®, the industry standard in pro audio, to the
new Professional Headphones, Shure has the products to fit your needs onstage, in the studio or at home. If great
audio is your passion, your job, or both, you’ve come to the right place. It’s nice to meet you, because you and
Shure have something in common. Contact BSW today at 800-426-8434 or visit
Professional Quality Headphones
Professional Studio Headphones
Professional Monitoring Headphones
© 2009 Shure Incorporated
Powerful, Reliable Headphone Amps
In these powerful and reliable headphone amps, Rolls offers portable and
rackmount solutions for large production rooms or your smaller home setup.
The RA62C features 6 stereo channels (both 1/4" and 3.5 mm) with independent
output controls and puts out up to 600 mW per jack. The 1/4" and 3.5 mm outputs
can be used simultaneously. 1/4", RCA and XLR inputs are included, as well as 6
stereo insert jacks for separate use of each channel. A stereo/mono switch allows
mixing two mono signals. Front and rear input jacks allow flexible use, and in
addition the RA62C can be used as a 6-channel distribution amp.
The RA53B gives you five 1/4" TRS and five 3.5 mm TRS outputs with individual level
controls and plenty of gain. Features: inserts on 3 channels; link I/O for connecting
two units together; 1/4", RCA and XLR right and left inputs; 1/4" TRS stereo input;
1/4" mono input.
The compact 4-channel HA43PRO is perfect for any application where space is
limited. Mini-slide faders adjust individual volumes. Stereo 1/4" and dual RCA inputs.
6-channel List $220.00
5-channel List $125.00
HA43PRO 4-channel List $70.00
20 Watts per Channel!
Furman’s HA6AB powers up to 6 pairs of headphones with a very generous 20 watts
per channel. It can also power one or two sets of small monitor speakers, often
saving the cost of an additional power amp. The front panel provides six stereo
headphone jacks with independent volume controls and two speaker switches.
The HA6AB offers balanced inputs with XLR connectors in addition to standard 1/4"
phone inputs.
Flexible Headphone Amp
The HC 6S, 6-channel headphone amp provides master stereo
1/4" TRS inputs which can drive any or all of the six stereo
headphone amps. A mono switch is provided on the front panel
to drive both channels of all six amplifiers from a common mono source. In
addition, six individual unbalanced stereo inputs are available to drive any
individual amplifier from a separate stereo source. Front and rear outputs allow
maximum flexibility in use or even allow two pairs of headphones to be driven
from each channel.
HC6S 6 channels List $529.00 Contact BSW For Lowest Prices
Multi-Purpose Professional Headphone
Amplifier System
The Alesis MultiMix 6 Cue features six independent high-power stereo amplifiers
that deliver maximum audio quality, even at very high or very low volume levels,
and boasts the capability to send six different mixes to up to 18 sets of headphones
or monitors for powerful, precise listening.
• 6-channel stereo headphone amplifier
• 6 independent high-power amps in compact, 1RU size
• 6 independent input/mix sections
• 3 headphone outputs per channel
• 4-segment LED tree for visual metering
• Mono and Left/Right Mutes per channel for two mono mixes per channel
• Servo-balanced, gold-plated XLR and
1/4" TRS connectors for optimal quality
List $199.00 14900
List $699.00 Contact BSW For Lowest Prices
Customized Headphone Mixes
Multi-Channel Headphone Amplifiers
These ART headphone amps offer a wealth of features to meet most any need.
The 4-channel HeadAMP 4 boasts 1/8" and 1/4" I/O as well as lower noise, lower
distortion and more output in a stackable metal case. The 5-channel HeadAMP
V features a level control and a 1/4" stereo out jack on each channel. It sports 1/4"
TRS insert jacks on channels 1 and 2, left and right RCA and multipurpose 1/4”
inputs as well as a 1/4" TRS Link jack. The 6-channel 1U rack mountable HeadAmp6
Pro boasts an auxiliary mixer with rotary controls that delivers up to 6 custom
headphone mixes. It sports XLR and 1/4" TRS balanced inputs with matching "Thru"
jacks for bridging multiple units and a front panel stereo 1/4" jack for quick insertion
of any stereo source. Outputs include both front and rear panel stereo 1/4" TRS jacks.
4-channel amplifier
List $80.00
5-channel amplifier
List $150.00
HEADAMP6PRO 6-channel rackmount amp List $249.00
Handles Four Headphones
Plus Monitor Control
The PreSonus HP4 headphone distribution
amplifier features four discrete headphone
outputs, each with its own volume control
and 150mW of amplification per channel. It offers adjustment over control room
monitors with a separate volume control, monitor mute switch and mono switch.
List $159.95
The PreSonus HP60 is a flexible and advanced headphone amplifier system,
delivering loud and clear headphone mixes for a variety of applications. It’s perfect
for studio or live sound in-ear monitoring systems. Loaded with six independent
headphone amps (150mW per channel), it features dual stereo inputs on balanced
1/4" TRS connectors as well as external input for each channel to let you mix
between three stereo audio streams (mix A, mix B, and external input) and create
customized mixes for every band member. Every channel boasts stereo output (for
sending line level headphone channel mixes to additional headphone amplifiers or
monitor systems), and also features headphone level, mix control between A and B
inputs, external input volume, mute and mono. The HP60 also offers talkback via an
external XLR microphone input.
Contact BSW For Lowest Prices
List $379.95
of Clean,
The Aphex
HeadPod 4 offers professional monitoring
for all types of headphones, and features
four independent stereo power amplifiers,
individual volume controls, high
headroom, a wide frequency response
with ultra-low distortion, very low crosstalk
and a master volume to match source
level. With the ability to work from any
analog source, it sports balanced 1/4"
connections as well as an S/PDIF input.
HEADPOD4 List $249.00
Headphone Control Box
This compact, passive headphone
control box mounts under a counter and
provides headphone volume control
for broadcast applications. It sports two
1/4" inputs for input/thru connections,
and boasts a rounded edge design that’s
gentle on the knees.
HBUC List $110.15 $
1·800·426·8434 • • [email protected]
Headphone Monitoring and Talkback From BSW
Six Channels Plus
Independent Talkback
The Flexphones 6-channel distributed headphone system with
independent talkback capabilities promises to be a vital hub in any
Broadcast/Studio setup. Each of its channels provides stereo program
monitoring and selective talkback to multiple Active Headphone Remotes
(AHR1PLUSs sold separately). Its six talkback switches allow independent
communication with each AHR1PLUS listener and can be configured to insert
talkback audio into only the left or both ears and dim either or both program
channels. Featuring talkback trimmers with pre-set maximum input levels,
microphone/line level talkback input and much more, the FlexPhones Master
has what it takes to deliver synchronized performance. You can even get an
optional mounting plate that adds an XLR connector so that headphone level
control, cough button and mic input can be situation and wired in one location.
Guest Module
with Cough Button
and Optional
Microphone Input
• Flexphones with XLR connector facilitates the use of a user-provided
gooseneck mic or headset
• Level control for local headphones with both 1/4" and 1/8" stereo jacks
• Talkback switches for independent communication with listeners; six RJ45
• Front-panel power and talkback LED indicators
• Half-rack profile allows the unit to be set on a desktop or mounted on a wall
With the optional HR1MPXLR mounting plate,
you can wire your guests
microphone and cough
button right at their desk
along side their headphone
level control. Very ingenious.
FLEXPHONES List $349.00 299
AHR1PLUS Active Headphone Remote List $139.00 $129.00
Mounting plate for AHR1 for under counter or turret
HR1-MPXLR Mounting plate for AHR1 with XLR mic connector hole $19.00
Note: Photo shows HR1-MPXLR
mounting plate with AHR1PLUS.
The HR1-MPXLR provides XLR hole
(XLR connector not included).
Headphone Amp
w/ Talkback
The HPA-4 Plus with talkback/cue powers up to four
sets of headphones. Each output is supplied with a
stereo amplifier and may be configured to accept
talkback/cue audio on the left headphone with a
simple contact closure to ground. Front and rear 1/4"
TRS jacks are provided with each output, along with a
front-panel level control. The stereo balanced input is
adjustable with the front-panel master level control.
The balanced talkback/cue input is equipped with
a rear-panel trimmer. The optional HR-1 headphone
remote pod provides 1/8" and 1/4" headphone jacks
with level control, momentary push button (cough,
dump, etc.) and mic-ON led.
HPA4PLUS 4-channel headphone amp $
List $329.00
Headphone remote control HPA4 rack shelf
High Power Headphone Amp
The Broadcast Tools HPA-2 is a compact high-power dual-input stereo
headphone amplifier that lets you monitor between two independent
stereo input sources.
List $139.00
16-Channel Audio Monitoring Distribution System
Aviom’s Personal Monitor Mixing System can transmit sixteen channels of audio with virtually no latency over
a single Cat-5/Ethernet cable of up to 500 feet. Sixteen channels of analog audio enter the AN16I transmitter
and are output through a single Cat-5 cable in high definition, 24-bit uncompressed digital sound. The A16II
personal mixer receives the digital signal and gives each end user complete control over all 16 channels. The
A16D distributor allows you to run eight personal mixers in parallel, simplifying setup and wiring. The A16-R
rackmount mixer adds balanced XLR and 1/4" outputs, stereo balanced insert points, and more. User presets can
be stored and recalled via MIDI. The optional A16CS control surface attaches to the A16-R to control your audio.
The AN160V4 converts 16 channels of uncompressed, 24-bit digital data into sixteen discrete mic- or line-level
analog audio output channels. It can be used both on stage and at front of house to provide outputs to consoles,
as well as to amplifiers and speaker processors.
16-channel transmitter
List $1,115.00
Personal mixer
List $675.00
8-hub distribution system
List $505.00
Rackmount mixer
List $1,115.00
Control surface for A16-R
List $555.00
16 channel output module with DB25 connector List $1,430.00
A16 or A16CS mic stand mount
Contact BSW For Lowest Prices
System With Zoned
MultiPhones II, consisting of a Master unit and up to 12
satellite Guest Pods or MiniPod via Cat5 cabling, offers
independent stereo headphone listening facilities
with Zoned Talkback for up to 12 users. Its Master unit
distributes Program audio to all Guest Pods or MiniPods
via three outputs, with each output working as an
isolated Talkback zone. Each Guest Pod contains a stereo
headphone amplifier, volume control and 1/4" and 1/8"
headphone jacks, as well as a cough button and mic-on
LED that you can wire to the audio console or other
equipment. The MiniPod offers a headphone amplifier
with level control and both 1/4" and 1/8" headphone
MULTIPHONESII List $275.00 $234.99
List $120.00 $89.99
List $115.00 $94.99
1·800·426·8434 • • [email protected]
Personal Wireless System
Packs a Punch
The Galaxy AS-1100 wireless UHF
personal monitor system has a range
of up to 300 feet and includes a
transmitter with 10 mW RF power,
120 selectable channels, a stereo
XLR/1/4" combo input and a
headphone output. The receiver
features a 100 mW headphone
output with volume control, and
an LCD display with channel,
battery level, and RF/AF indicator.
The system is available in two
frequency ranges: 584-607
MHz (D) and 655-679 MHZ
(L). Receivers are also sold
Up to 300-foot
Mix and Match IFB Gear
Full system (584-607 MHz) Full system (655-679 MHz) Receiver only (584-607 MHz) Receiver only (655-679 MHz) List $559.00
List $559.00
List $279.99
List $279.99
Contact BSW For Lowest Prices
Easy Bluetooth IFB Monitoring
The wireless RemoteAmp Blue provides IFB
monitoring through a Bluetooth equipped cell
phone, delivering a listen only connection for
voice IFB or full bandwidth stereo music.
• Pairs to your cell phone like any Bluetooth wireless headset
• Line input jacks and separate volume controls offer wired operation in parallel with
the Bluetooth connection
• XLR line level input accepts either a balanced mono signal, or a party line intercom
feed (listen-only)
• Also pairs to Bluetooth equipped sound cards and music players in full bandwidth
A2DP stereo mode
Listen IFB equipment makes it easy for the broadcast booth to communicate with
on-field reporters. The gear includes an interruptible foldback (IFB) transmitter
and a receiver , as well as an LA-164 ear piece and LA-122 antenna. The stationary
transmitter is available in either the 72 MHz and 216 MHz frequency range, with
57 channels in each frequency range, and works equally well indoors or outdoors,
You can use up to six transmitters in the same area. The receiver is a beltworn
model featuring a visual display of channel selection, battery level and RF signal
strength. The operating range for the 72 MHz system is roughly 1,500 feet, while
the range for 216 MHz system is around 3,000 feet. Your Listen IFB system can also
be expanded with additional receivers or wireless speakers. The speaker features a
woofer/tweeter with 10-watt power amplifier and operates on power supply, 12V
AC or batteries.
Individual Items and Accessories:
Transmitter, 72 MHz
Transmitter, 216 MHz
Receiver, 72 MHz
Receiver, 216 MHz
Universal antenna kit
Telescoping antenna for 216 MHz
Rechargeable batteries (2)
Battery charger
Four receiver carry case w/ battery charger
Speaker, 72 MHz, 1500 ft. Speaker, 216 MHz, 3000 ft. List$689.00
List $14.00
List $89.00
List $15.00
List $9.99
List $18.00
List $439.00
Contact BSW For Lowest Prices
Contact BSW For Lowest Prices
Intercom System
with Up to Four Receivers
The new Telex Radiocom BTR-800 UHF
wireless intercom system is truly remarkable.
The rackmountable BTR-800 transmitter offers
a long list of standard features unavailable on other systems, such as: full UHF operation, two intercom-channel
access from each of up to (4) duplex beltpacks, stage announce output with relay closure, wireless talk around
(ISO), Enhanced ClearScan, talk/listen headset station and more. With a combination tone code/RF noise squelch
and DSP digital audio processing, this wireless transmitter sounds great, even at a great distances! Combine all
of that with an easy-to-use graphical interface that lets you get started right out of the box, and you’ve got the
most innovative and versatile intercom system around. The BTR-800 is compatible with Telex, RTS and Clear-Com
hardwired communications systems. The individual TR825 receivers are sold separately. Call for more info today.
BTR800 Transmitter List $5,295.00
TR825 Receiver List $2,495.00
Contact BSW For Lowest Prices
Flexible Intercom Headsets
Contact BSW For Lowest Prices
Versatile Wireless Headset
The Telex PH2 is a medium-weight, dual earpiece mono headset with foam
filled cushions, offering a light feel with moderate isolation from ambient
noise. The flexible, dynamic noise canceling boom mic is easily positioned
with a unique continuously-adjustable ball joint. Cable length is 6 ft.;
connector type is A4F. Headphone impedance is 150 ohms. Or choose the
PH2R terminating in an A4M connector. The PH1 is a single-sided headset.
The Telex PH-88 is a single-sided super lightweight headset for the ultimate in daylong
comfort. It offers a dynamic noise-canceling gooseneck microphone with a semi-rigid, fully
adjustable boom for precise positioning. The high-quality wide band dynamic earphones
are covered in moleskin for superior fit, isolation and frequency response. A4F connector.
Also available with an A4M connector (PH88R)
PH1R Dual ear, A4M List $210.00
PH2 Dual ear, A4F List $269.00
PH88 Single ear, A4F List $192.00
PH2R Dual ear, A4M List $252.00
PH1 Single ear, A4F List $214.00 PH88R Single ear, A4M List $192.00
The BlueSet series of intercom headset adapters
utilize Bluetooth Wireless Technology and can plug
directly into most Party-Line (PL) belt packs (including
Clearcom and Telex), replacing the wired headset.
A 3.5 mm stereo headset jack contains a mic level
output signal suitable for recording, with the beltpack
headphone signal on the left channel, and the
Bluetooth return signal on the right. A switch selects
between connection to a 3rd party Bluetooth headset
or a cell phone.
For versatile intercom headset compatibility, Female
and Male XLR four and five pin versions are available:
BlueSet-F4, BlueSet-F5, BlueSet-M4 and BlueSet-M5.
BLUESET-F4 Female, 4-pin $236.55
BLUESET-F5 Female, 5-pin $236.55
BLUESET-M4 Male, 4-pin
BLUESET-M5 Male, 5-pin
Depend on BSW for the Best Selection and Lowest Prices
Long Range In-Ear Wireless
Monitoring System
Sennheiser offers high-quality wireless in-ear communication with longer range from its
high-power 30 mW transmitter. The EW300IEM in-ear package gives you the switchable
preset frequencies so you won’t be talking on top of each other, custom volume levels and
high-quality sound . This easy-to-use system consists of three components: the SR300 IEM
rackmount transmitter, EK300 IEM bodypack receiver and Sennheiser IE4 earphones.
• 30 mW power for long transmission range
• 8 switchable preset frequencies for easier set up when operating several channels
• 1440 frequencies for greater tuning flexibility
• Choice of stereo or dual mono transmission
• Safety mode protects against level peaks
• Stereo in-ear phones with ear molds
• Headphone monitoring output on the transmitter
List $999.95
Contact BSW For Lowest Prices
Affordable In-Ear Wireless Monitoring System
Shure’s PSM 200 system (P2TRE2) makes in-ear monitoring affordable,
delivering a transmitter that is also a two-channel mixer, high-fidelity
earphones, and a wired/wireless bodypack receiver. Range of up to 300 ft.
Transmitter features: eight channels per system; volume controls for mic/
line inputs; integrated mix control with two mic/line XLR-1/4" combo input
channels; XLR split outputs that connect signals to a mixing console. The P2R
Hybrid Receiver bodypack accepts either a direct line feed from your mixer or
wireless transmission via the P2T TransMixer. Receiver features: non-defeatable,
built-in limiter to aid in hearing protection; LED indicators for power, signal
strength, frequency, limiter and battery; volume control; 1/4" line input jack.
Receiver Transmitter
Transmitter is also a
2-channel mixer!
List $361.00 List $374.00 Contact BSW For Lowest Prices
Top Quality Wireless Personal Monitoring System
The Shure PSM 900 Wireless Personal Monitor System offers superb audio quality and robust RF
performance at a range of up to 300 feet with output power up to 100 mW. Precision front-end
RF filtering significantly reduces dropouts from RF interference, and the enhanced digital stereo
encoder provides excellent stereo separation and audio clarity.
The system's ultra-compact P9R stereo bodypack receiver offers RF Scan and Automatic Gain
Control for unparalleled RF stability and channel availability, as well as CueMode for monitoring
different stage mixes and storing up to 20 separate channels from one bodypack for quick and
easy reference. The P9R is compatible with all Shure SCL Sound Isolating Earphones. Shure's new
SE425CL high-definition, sound-isolating earphones (clear finish) are included in some systems.
The system's P9T half-rack wireless transmitter boasts state-of-art technology, including
CueMode, Scan and Sync, and RF mute switch for easy setup and operation. Connections include
balanced 1/4" and XLR, loop out, and headphone out. It comes with a rack-mounting kit, front or
back mountable antennas, and power supply.
PSM 900 systems are available with and without earphones in various frequency bands, including G6
(460-506 MHz), G7 (506-542 MHz), K1 (596-632 MHz) and L6 (656-692 MHz). See them all at!
P9TR425CL-G7 PSM 900 system (G7 band) with earphones List $1,800.00
PSM 900 system (G7 band) no earphones List $974.00
PSM 900 system (G7 band) no earphones List $676.00
Wide range with
tons of power!
Contact BSW For Lowest Prices
IFB System with Extended Operating Range
High Quality Earphones Keep
Noise at Bay
Sennheiser IE4 earphones deliver outstanding
audio quality with excellent bass response
and high isolation against environmental
noise. Offering 16-ohm impedance, they
come with three sizes of replaceable ear
sleeves and a 4-foot cable with minijack
List $59.95
This high-quality Lectrosonics interruptible foldback system was
designed for use in broadcast applications where extended operating
range and high-quality audio are essential. You’ll get line-of-sight
range of roughly one mile…much more than any other IFB system. The
IFBT4 transmitter has 256 UHF frequencies in 100 kHz steps that provide
exceptional flexibility in coordinating frequencies in multi-channel wireless systems.
Features: 250 mW transmitter output; microprocessor-controlled operation eliminates
transients at turn-on and turn-off; multi-use XLR input jack; built in microphone preamp;
compact size for use anywhere. Note: specify frequency block 23 (588 - 614 MHz) or 24 (614 639 MHz) when ordering these Lectrosonics systems. The IRBR1A receiver is housed in a rugged
machined aluminum package. Features: preset frequency can be set without power or transmitter signal; scan
mode stores up to five additional frequencies; up to 20 hours battery life on lithium battery (8 hours on alkaline).
Note: user to provide own earbuds.
Transmitter List $1,140.00
IFBR1A-21 Receiver
List $708.00
Contact BSW For Lowest Prices
1·800·426·8434 • • [email protected]
Intercom Systems From Bsw And Clear-Com
Clear-Com Encore analog party-line systems offer unsurpassed 2-wire, group communication capabilities,
with an intuitive plug-and-play design, superior audio and reliable communication technology for the most
demanding applications. Trusted by thousands of audio experts around the world, these systems are the
communication backbone of countless theatres, schools, local broadcast stations, churches and more.
Main Stations
The CS-702 is a portable main station with a power supply and a versatile intercom
monitoring system. It supports up to 40 beltpacks or 10 speaker stations on 2
channels. It accepts mic or line-level audio program input, assignable to either or
both channels, with interrupt switch to override program. The rack mount (1RU)
MS-702 intercom main station supports up to 40 RS-601 beltpacks, 10 speaker
stations or 12 headset stations on two channels. The 4-channel MS-704 (2RU rack
mount) supports the same number of beltpacks and stations as the MS-702 and also
features three IFB channels, an announce button/relay, a channel-linking button and
a remote mic kill switch.
The SB-704 includes all of the features of the MS-704, with a 4x10 assignment
matrix in place of the internal speaker (an external speaker is required for station
monitoring). Its ten-position slide switch matrix allows assignment of any of the ten
intercom lines to any of the four intercom channels, to an isolated separate partyline, or to an off position.
Portable main station
List $1,095.00
2-Channel headset/speaker main station
List $1,270.00
4-Channel headset/speaker main station
List $1,885.00
4-Channel switchboard main station
List $2,435.00
Contact BSW For Lowest Prices
These stations access one or four intercom channels to provide users with basic
talk/listen operations.
The KB-701 remote speaker station connects to a single channel of party-line
intercom and operates in half-duplex mode. It features both an integral speaker and
a flush mount electrets microphone with mic limiter and a push-to-talk button. The
KB-702 lets the user select between two channels of party-line communications,
with the ability to talk and/or listen on the selected channel. The user can listen via
the integrated speaker (or may use a headset or telephone-style handset) and can
talk via a headset mic, a telephone handset, or a push-to-talk microphone. The
KB-702 GM adds a gooseneck microphone (GM-9/GM-18 or GN-250/ GN-450)
connector option, with adjustable VOX feature and mic/ headset switch.
The V-Box permits either angled or vertical portable, desktop or wall mounting of
the KB speaker stations. It offers both male and female 3-pin XLR connectors and
boasts rugged metal and wood construction for an attractive, durable enclosure.
1-Channel flush-mount push-to-talk speaker/mic station List $400.00
2-Channel flush-mount headset/speaker station List $400.00
KB-702GM Adds gooseneck mic connector
List $575.00
Portable/Desktop or wall mounting option List $270.00
Contact BSW For Lowest Prices
The CC-260 double ear
headset offers full range
audio response and great
comfort. Its enclosed ear
design with leatherette
cushions reduce
background noise and
provide excellent acoustic
isolation. Its boom
microphone is equipped
with a noise cancelling mic element and 270 degree rotation for left or right side use.
The CC-95 single-ear enclosed headset offers the same full range audio response,
acoustic isolation, comfort and durability as the CC-260. The CC-27 single-ear, wrap
around ear worn headset features a dynamic noise cancellation microphone offering
excellent frequency response and accurate voice pick-up. It is fitted with a 4 Pin
Female XLR connector. And for the budget-conscious, high performance Que-Com
headsets boast a wide frequency response and high audio output.
CC-260 Double ear enclosed headset
List $325.00
CC-95 Single ear enclosed headset
List $265.00
CC-27 Single ear wrap around headset
List $148.00
SMQ-1 Que-Com single ear headset/beltpack List $245.00
DMQ-2 Que-Com single ear headset/beltpack List $290.00
Remote Stations
Contact BSW For Lowest Prices
The RM-702 single rack-space, 2-channel remote station lets an operator talk and/or
listen on either or both channels. Powered by the intercom line, it accepts line-level
audio program input via a DB-15 connector, with both channels programmable
for interrupt. It offers microphone limiting and a speaker dipping circuit for greater
output before feedback. The RM-704 provides four independent intercom channels
with separate volume controls for each channel. It also features three IFB channels
for talent cuing and an announce button/relay for paging.
2-Channel rack mount (1RU) remote station
List $1,090.00
4-Channel rack mount (2RU) remote station List $1,325.00
Contact BSW For Lowest Prices
Wired Beltpacks
The RS-601 is a single channel wired beltpack with a 4-pin male headset
connector and 3-pin female/male loop through intercom line connectors. It
also sports a 2.5mm AUX headset connector and an RS-232 data connector
for programming. It can be programmed using Clear-Com’s V-pack software.
RS-601 Single channel wired beltpack
List $300.00
RS-602 2-Channel dual listen beltpack (uses 6-pin XLR) List $405.00
RS-603 2-Channel dual listen beltpack (uses 3-pin XLR) List $455.00
Contact BSW For Lowest Prices
Depend on BSW for the Best Selection and Lowest Prices
Clear-Com Wireless Intercom Systems
Clear-Com brings a spectrum of wireless intercom systems for professional users
who may require a standalone wireless system or an integrated wireless solution to
complete their communication needs. Carrying the broadest range
of wireless intercom options, Clear-Com is able to offer a solution
for practically any requirement, budget, and environments. Talk to a
BSW representative or visit our website to find out more!
HME DX100/100C
Power Supplies
The PK-7 portable power supply will support up to 30 Que-Com headset stations
to 9 partyline beltpacks. It is line and load regulated and short-circuit protected.
The PS-702 can deliver 1.2 amps at 30 volts DC to two channels (enough to power
up to 40 beltpacks, 10 speaker stations, or 12 headset stations even under the most
demanding conditions). Either channel is capable of supplying up to 1.2 amps, and
the full current capacity may be divided between the two channels. The PS-704 is a
4-channel, single rack-space intercom power supply featuring Clear-Com’s fail-safe
design for maximum reliability. It delivers 1.2 amps at 30 volts, supplying power
for one to four channels of intercom. It will support up to 40 beltpacks, 10 speaker
stations or 12 headset stations.
1-Channel, 0.4 Amp portable power supply
List $290.00
PS-702 2-Channel 1 Amp (2 Amp peak) rack mount
(1RU) universal power supply
List $855.00
PS-704 4-channel, 2 Amo rack mount (1RU)
system power supply
List $1,095.00
Contact BSW For Lowest Prices
Clear-Com’s HME DX100/100C allows up to 4 full duplex or 15
push-to-transmit shared users to speak to each other via headsets
without any interconnecting cables. Users can seamlessly
communicate in hands-free mode or have a private conversation on a secured
channel. This flexible system uses AA/rechargeable batteries, NiMH, or 12-14VDC/
automotive power.
Simple and expandable, the HME DX100/100C comes complete with everything
you need for reliable, cost-effective operation for any application. Now you can mix
and match two COMMUNICATOR® models: the WH200 ComLink all-in-one, wireless
headset or the BP200 beltpack with your choice of plug-in headset. Talk with a BSW
sales representative or visit our website to find out more.
• 2.4 GHz license-free operation
• Flexible battery-powered operation
• Digital frequency hopping spread spectrum • Expandable system
Mobile base station
Wireless headset ComLink
Wireless wall station Single muff headset with noise canceling mic
Single muff headset with directional mic List $1,483.00
List $776.00
List $802.00
List $1,295.00
List $183.00
List $145.00
Contact BSW For Lowest Prices
Two-Channel Intercom System​
Interfaces, Peripherals and Accessories
The TWC-701 2-Channel, 3-Pin XLR cable adapter combines two intercom channels
on a single 3-pin cable for beltpacks with the TW option. The FL-7 call signal flasher
provides both a visual and audible indication of a call signal on the intercom
channel. The GM-9 (9-inch length) and GM-18 (18-inch) gooseneck electret
condenser microphones feature a gold-plated and threaded 1/4-inch jack connector
and include a fitted windscreen. The GN-450 is an 18-inch plug-in gooseneck
TWC-701 XLR cable adapter
List $370.00
Call signal flasher
List $365.00
9-inch gooseneck mic
List $189.00
18-inch plug-in gooseneck mic List $199.00
Contact BSW For Lowest Prices
The Clear-Com HME DX210 offers the perfect blend of
wireless intercom performance, system compatibility with
wired intercom systems, and ease of use. Operating in the
2.4GHz band, the DX210 delivers exceptional sound clarity
and enables interference-free communication for highly
demanding productions.
This newly designed, two-channel intercom system expands on Clear-Com’s
acclaimed, time tested DX200 system. The DX210’s wired intercom interface is now
compatible with Clear-Com’s or RTS’ 2-wire systems, and provides two separate
2-wire and 4-wire interconnections. In single channel mode, the powerful 1RU base
station supports up to 16 full-duplex and 44 half-duplex beltpacks and/or wireless
headsets by linking four base stations. The DX210 is paired with the rugged BP210
beltpack and All-in-One WH210 Wireless Headset COMMUNICATORs, which feature
two intercom buttons (IC1/IC2) with ISO. The system is also backward compatible
with the DX200 COMMUNICATOR models such as BP200, WH200 and WS200.
Mobile base station
List $4,200.00
List $940.00
All-in-one wireless headset
List $990.00
Wireless wall station List $1,295.00
Single muff headset with noise canceling mic List $183.00
Single muff headset with directional mic List $145.00
Contact BSW For Lowest Prices
Multi-Mode Wireless Intercom System​
The Tempest900 is a sophisticated yet easy to use system (for use in U.S. and Canada only) at 900 MHz that is
available in two-channel (2 full duplex) or four-channel (4 full duplex) formats. It is compatible with existing 2/4wire wired intercom systems.
It offers three 3 modes of operation: Normal Mode with full duplex operation on all five beltpacks, Shared Mode
with full duplex on four beltpacks with an unlimited number for others in a PTT mode (5 may talk at any given
time) and Split Mode with full duplex on four beltpacks with an unlimited number for others (one belt station
talking at one time).
4-channel full feature base station
2-channel full feature base station
4-channel dual listen wireless belt station
2-channel dual listen wireless belt station Remote antenna transceiver
List $6,595.00
List $5,275.00
List $2,195.00
List $1,755.00
List $2,195.00
Contact BSW For Lowest Prices
1·800·426·8434 • • [email protected]
Always ON.
Since its origin, radio was
(and still is) magic.
It communicates, entertains and has
the ability to ignite the imagination.
There is a special magic to radio and
broadcast equipment, too. Each and
every part, panel and piece plays
an important role in the magic of
radio. It has to be ‘ON’ and working—
around the clock, day and night, 365
days a year. The same can be said for
the engineers who maintain, fix and
keep this gear alive.
BSW is motivated by the idea of
keeping the magic alive. Keeping
radio ‘ON’ for everyone to hear. Just
like the engineer and radio itself—
BSW is always there, always working
... always ON.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF