Leviton Residential Intercom System

Door Chime Board

Cat. No. 47000-CHM

DI-003-47000-01A

FEATURES

• Upgrades the Leviton Residential Intercom System for use with Door Chime (Chime not included)

• Easy snap installation onto SMC mounting bracket

• Configurable set time delay

Leviton Intercom

Door Chime Board

NO

JP2

NO

K1

JP1

SW1

PACKAGE CONTENTS

• Chime Board

• 12V Power Supply

• 12" Patch Cord (1)

C5

X1

C4

INSTALLATION

1. Mount the Door Chime board onto an available spot of the

SMC mounting bracket.

2. Connect wires from door chime transformer and chime set to terminals at the top of the board. A chime will sound when any zone is activated.

3. This module can be used for various devices; the contacts are rated for 1 Amp at 125VAC/30VDC.

4. Set the jumper for normally open (NO) or normally closed

(NC) contacts as desired. If being used to activate a door chime, set to the “normally open” position.

5. Use the patch cord to connect the output of the Intercom

Main Controller board to the input of the Door Chime board.

6. Use a second patch cord to connect to the output/aux of the door chime board to the input of the Intercom Interface board.

7. Set the dip switches according to the table for the desired relay activation time.

NOTE: The LED will blink to indicate normal operation.

NOTE: Refer to Wiring Diagram on back page for wiring configuration.

U2

+

R23

R22

C9 C8

C7

C2

+

D7

LED1

+

F1

R8

R12

R7

R6

R5

R4

SW2 – +

12VDC w w w. l e v i t o n . c o m

R24

Delay Time

3 sec

1 sec

2 sec

0.6 sec

Switch 1

0

0

1

1

Switch 2

0

1

0

1

• Power module using power supply provided or jumper to PSA

• This module requires 12VDC

• Fuse is a 1 Amp 250V type GFE

0 = OFF (switch away from board), 1 = ON (switch pushed toward board)

WIRING DIAGRAM

3

4

1

2

Line Distribution Board

By Leviton Voice & Data

LINE

IN

LINE

OUT

SECURITY

FROM DEMARCATION

Leviton

Door Chime Interface Board

1 2

In

Out

WWW.LEVITONVOICEDATA.COM

Intercom Controller Board

By Leviton Integrated Networks

To ADO port on

TLDM

TELCO in

TELCO loop

Output/Aux

Leviton

Station Interface

Board

Zone 1

Zone 2

Zone 3

24VDC

Zone 4

WWW.LEVITON-LIN.COM

From Test port on TLDM

Dry contact input

Do not apply voltage here

To second

Station Interface

Board or auxiliary module if used

Door Bell

Transformer/

Power Supply

Call Button

Use wire gauge recommended by door chime manufacturer

Door Bell

• For technical assistance contact us at 1-800-824-3005

• Visit our website at www.leviton.com

LIMITED 2 YEAR WARRANTY AND EXCLUSIONS

Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship under normal and proper use for two years from the purchase date. Leviton’s only obligation is to correct such defects by repair or replacement, at its option, if within such two year period the product is returned prepaid, with proof of purchase date, and a description of the problem to Leviton Manufacturing Co., Inc.,

Att: Quality Assurance Department, 59-25 Little Neck Parkway, Little Neck, New York 11362-2591. This warranty excludes and there is disclaimed liability for labor for removal of this product or reinstallation. This warranty is void if this product is installed improperly or in an improper environment, overloaded, misused, opened, abused, or altered in any manner, or is not used under normal operating conditions or not in accordance with any labels or instructions. There are no other or implied warranties of any

kind, including merchantability and fitness for a particular purpose, but if any implied warranty is required by the applicable jurisdiction, the duration of any such implied warranty, including merchantability and fitness for a particular purpose, is limited to two years. Leviton is not liable for incidental, indirect, special, or consequential damages, including without limitation,

damage to, or loss of use of, any equipment, lost sales or profits or delay or failure to perform this warranty obligation.

The remedies provided herein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise.

DI-003-47000-01A

8.5"

5.5"

FOLD SCHEME

Fold Line

LEVITON INSTRUCTION SHEET/MANUAL

SPECIFICATIONS

DI-003-47000-01A

Black

Helvetica

50 Lb. offset

Paper size:

Overall size: 8.5" X 5.5"

Final fold size:

4.25" X 1.83"

DOCUMENTATION

H2D

N/A

11/14/06

4.25"

1.83"

FINAL