Samsung | SPD-400 | User manual | Samsung SPD-400 decoder

NETWORK VIDEO DECODER
User Manual
SPD-400
Network Video Decorder
User Manual
Copyright
©2011 Samsung Techwin Co., Ltd. All rights reserved.
Trademark
is the registered logo of Samsung Techwin Co., Ltd.
The name of this product is the registered trademark of Samsung Techwin Co., Ltd.
Other trademarks mentioned in this manual are the registered trademark of their respective company.
Restriction
Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document shall
be reproduced, distributed or changed, partially or wholly, without formal authorization of Samsung Techwin.
Disclaimer
Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no
formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own
responsibility. Samsung Techwin reserves the right to change the contents of this document without prior notice.
Warranty
If the product does not operate properly in normal conditions, please let us know. Samsung Techwin will resolve the
problem for free of charge. The warranty period is 3 years. However, the followings are excluded:
• If the system behaves abnormally because you run a program irrelevant to the system operation.
• Deteriorated performance or natural worn-out in process of time
 Design and specifications are subject to change without prior notice.
 The default password can be exposed to a hacking thread so it is recommended to change the password
after installing the product.
Note that the security and other related issues caused by the unchanged password shall be responsible
for the user.
overview
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
● OVERVIEW
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings, Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided for
your safety, If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/ accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lighting storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
English _3
overview
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS PROCUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC
OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS
ON THE EQUIPMENT.
Apparatus shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
EXPLANATION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the product.
4_ overview
Class construction
An apparatus with CLASS construction shall be connected to a MAINS
socket outlet with a protective earthing connection.
Batteries(battery pack or batteries installed) shall not be exposed to excessive
heat such as sunshine, fire or the like.
It is essential that when changing the battery in the unit, the replacement
battery must be of the same type otherwise there may be a possibility of an
explosion.
CALIFORNIA USA ONLY
This Perchlorate warning applies only to primary CR (Manganese Dioxide)
Lithium coin cells in the product sold or distributed ONLY in California USA.
“Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/
hazardouswaste/perchlorate.”
CAUTION
These servicing instructions are for use by qualified service personnel only.
To reduce the risk of electric shock do not perform any servicing other than
that contained in the operating instructions unless you are qualified to do so.
Please use the input power with just one camera and other devices must not
be connected.
English _5
● OVERVIEW
Battery
overview
Please read the following recommend safety precautions carefully.
 Do not Place this apparatus on an uneven surface.
 Do not install on a surface where it is exposed to direct sunlight, near
heating equipment or heavy cold area.
 Do not place this apparatus near conductive material.
 Do not attempt to service this apparatus yourself.
 Do not place a glass of water on the product.
 Do not install near any magnetic sources.
 Do not block any ventilation openings.
 Do not place heavy items on the product.
User’s Manual is a guidance book how to use the products
The meaning of the using sign in the book is following
 Reference : In case of providing information for helping of product’s usages
 Notice : If there’s any possibility to occur any damages for the goods and
human caused by not following the instruction
 Please read this manual for the safety before using of goods and keep it in
the safe place.
6_ overview
CONTENTS
OVERVIEW
INSTALLATION &
CONNECTION
Important Safety Instructions
Product Features
Recomended PC Specifications
What’s Included
At a Glance
14
Connecting with other Device
19
Configuring Network Video Decoder in
LAN Environments
Connecting the Network Video
Decoder Directly to DHCP-Based
DSL/Cable Modem
Connecting the Network Video
Decoder and Broadband Router that
is Connected to the Cable Modem
Buttons used in IP Installer
Static IP Setup
Dynamic IP Setup
Connecting to the Network Device
from a Shared Local PC
14
NETWORK CONNECTION
AND SETUP
19
20
21
22
23
27
28
English _7
● OVERVIEW
3
3
9
9
10
11
overview
WEB VIEWER
29
SETUP SCREEN
31
APPENDIX
48
8_ overview
29
30
Accessing the Network Video Decoder
Login
31
31
39
43
Setup
Audio & Video Setup
Network Setup
System Setup
48
50
51
52
54
Specification
Product Overview
Troubleshooting
Open Source Announcement
GPL/LGPL Software License
PRODUCT FEATURES
RECOMENDED PC SPECIFICATIONS
 CPU : Intel(R) Core(TM)2 2.00 GHz or higher
 Operating System : Windows XP, VISTA, 7
Mac OS
 Resolution : 1280X1024 pixels or higher
 RAM : 1GB or higher
 Web Browser : Internet Explorer 7.0 or 8.0, Firefox, Chrome, Safari
 Video Memory : 128MB or higher
English _9
● OVERVIEW
 Supports Multi-format decoding
The network video decoder employs H.264/MPEG-4/MJPEG multi-format decoder to
decode and display up to 4 video streams transferred through network.
 Supports Full-HD Video Display
The maximum supported output resolution is 1920x1080, and provides HDMI, VGA and
CVBS (BNC) output ports for display.
 Alarm Monitoring
When an event occurs at a network camera or the encoder, the monitoring display switches
to the corresponding video according to the settings.
overview
WHAT’S INCLUDED
Please check if your network video decoder and accessories are all included in the product
package.
Appearance
AUDIO OUT
VIDEO OUT
HDMI
Item Name
Quantity
SPD-400
1
User Manual CD
1
Quick Guide
1
ASSY-Tapping Screw
4
Description
VGA
10_ overview
Used for installation on the wall
AT A GLANCE
Front Side
● OVERVIEW
AUDIO OUT
Item
VIDEO OUT
HDMI
VGA
Description
AUDIO OUT
This port outputs selected audio from the device connected through the
network, according to the settings.
b
VIDEO (CVBS) OUT
A BNC output port for display.
This port outputs video only if CVBS mode is selected.
c
HDMI
An HDMI output port for display.
This port outputs video only if HDMI or VGA mode is selected.
VGA
A VGA output port for display.
This port outputs video only if HDMI or VGA mode is selected.
English _11
overview
Rear Side
ACT
LINK
MONITOR
RESET
NETWORK
USB
NO1 CM1 NC1 NO2 CM2 NC2 G
RELAY OUT
POWER
S1 D+ D–
Item
NETWORK
Used to connect a LAN cable.
b
USB
This function is not currently available.
–
Description
c
+
DC 12V
SENSOR RS-485
RS-485 D+/D-
This function is not currently available.
NO1/NO2
Alarm Out (for Normal Open)
CM1/CM2
Alarm Out (for Common)
NC1/NC2
Alarm Out (for Normal Close)
S1
An alarm input sensor port.
G
Earth-grounding port for external signal.
I/O Port
RESET
12_ overview
This button initializes network video decoder settings, or selects the monitor
output.
Press and hold for 5 seconds or longer, then the system indicator turns off,
settings are initialized, and will restart.
Press the button for about 1 second, then the MONITOR LED color changes
as the video output mode changes.
Item
Description
 To change the video output mode, change it in Web
Viewer’s video settings or press the [RESET] button
for about 1 second.
POWER
ON : While the power is on.
OFF : If the power is off.
Power Port
Used to connect the specified power source.
GND
Used for earth-grounding.
English _13
● OVERVIEW
MONITOR
Power,
Monitor LED
Indicates the video output mode.
Green : HDMI or VGA output mode.
Yellow : CVBS output mode.
installation & connection
CONNECTING WITH OTHER DEVICE
Microphone
Camera
Network
AUDIO OUT
VIDEO OUT
HDMI
VGA
Amp
Speaker
Monitor
Monitor
Monitor
Connecting Video Out
Connect a monitor to the preferred video output of the network video decoder.
J
 It outputs video through the port according to the setting configured in the Web Viewer’s “Display
Setup > Monitor”. (Page 37)
 When in HDMI or VGA output mode, the display may not render properly if configured resolution is
not supported by the monitor.
 Press and hold [RESET] button for about 1 second to change the video output mode.
 The MONITOR LED changes its color accordingly.
14_ installation & connection
Connecting Audio In/Out
1. Connect a microphone to the network camera or encoder, and set Audio setting of
corresponding device to <ON>.
3. When using Line Out, connect the speaker’s LINE IN and Network Video Decoder’s
AUDIO OUT terminals.
4. For HDMI output, connect an HDMI monitor to HDMI port.
 For HDMI audio output, a monitor with built-in speaker is required.
J
 There is some possibility that HDMI audio doesn’t work with some specific monitors.
English _15
● INSTALLATION & CONNECTION
2. Set Network AUDIO SETUP to ON in Video Decoder’s single layout settings, and
select its output from Line Out and HDMI out in Audio Settings. Note that HDMI
OUT for audio output can be selected only when the monitor out is set to HDMI.
installation & connection
ACT
LINK
MONITOR
RESET
NETWORK
USB
NO1 CM1 NC1 NO2 CM2 NC2 G
RELAY OUT
Ethernet
S1 D+ D–
POWER
+
–
DC 12V
SENSOR RS-485
Power
Ethernet Connection
Connect the Ethernet cable to the local network or to the Internet.
Power Supply
Use the screwdriver to connect each line (+, –) of the power cable to the corresponding
power port of the network encoder.
J
 Be careful not to reverse the polarity when you connect the power cable.
 Please make sure the monitor and network video decoder are turned off when connecting them.
16_ installation & connection
Connecting to the I/O port box
Connect the Alarm I/O signal to the corresponding port of the rear port box.
● INSTALLATION & CONNECTION
ACT
LINK
MONITOR
RESET
NETWORK
USB
NO1 CM1 NC1 NO2 CM2 NC2 G
RELAY OUT
POWER
S1 D+ D–
NO1 CM1 NC1 NO2 CM2 NC2 G
RELAY OUT
+
–
DC 12V
SENSOR RS-485
S1 D+ D–
SENSOR RS-485
Connecting to the Alarm Input
Connect one signal cable (out of 2) of applicable sensor to the [S1] port, and the other to
the [G] port.
Connecting the Alarm Output
Connect one signal cable (out of 2) of applicable external device to the [RELAY OUT(NC, NO)],
and the other to the [CM] port.
English _17
installation & connection
Alarm I/O Wiring Diagram
3.3V
ALARM IN
(12mA sink)
GND
ALARM OUT
NC2
ALARM COM
CM2
(24VDC 1A,
125VAC 0.5A MAX)
ALARM OUT
NO2
3
(24VDC 1A,
125VAC 0.5A MAX)
ALARM OUT
NC1
ALARM COM
CM1
ALARM OUT
NO1
18_ installation & connection
network connection and setup
You can configure the Network Video Decoder’s network settings to your preference.
Accessing the Network Video Decoder from a PC within the same LAN
1. Launch an Internet browser on the local PC.
2. Enter the IP address of the Network Video Decoder into the browser’s address field.
VGA
VIDEO OUT
HDMI
AUDIO OUT
Network Video Decoder
Switch
HUB
Network Camera
INTERNET
Network Camera
Firewall
Local PC
DDNS Server
(Data Center, KOREA)
<Local Network>
M
 A remote PC in an external Internet out of the LAN network may not be able to connect to the
network video decoder installed in the intranet if a firewall is set.
In this case, to resolve the problem, contact your network administrator.
 The default IP address is set to 192.168.1.200.
To change the IP address, use the IP Installer.
For further details on IP Installer use, refer to “Static IP Setup”. (Page 23)
English _19
● NETWORK CONNECTION AND SETUP
CONFIGURING NETWORK VIDEO DECODER IN LAN
ENVIRONMENTS
network connection and setup
CONNECTING THE NETWORK VIDEO DECODER DIRECTLY
TO DHCP-BASED DSL/CABLE MODEM
INTERNET
VGA
VIDEO OUT
HDMI
AUDIO OUT
Network Video Decoder
DSL/Cable Modem
Network Camera
DDNS Server
(Data Center, KOREA)
1. Use a cross cable to connect a computer and the Network Video Decoder.
2. Run the IP Installer and change the IP address of the Network Video Decoder so
that you can use the web browser on your desktop to connect to the Internet.
3. Access the Network Video Decoder using an Internet browser.
4. Move to [Setup] page.
5. Move to [Network] – [Interface], and set the network type to [DHCP].
6. Connect the Network Video Decoder, which was removed from your PC, directly to
the modem.
7. Restart the Network Video Decoder.
M
 For setting the network type, refer to “Interface”. (page 39)
20_ network connection and setup
CONNECTING THE NETWORK VIDEO DECODER AND
BROADBAND ROUTER THAT IS CONNECTED TO THE
CABLE MODEM
VGA
VIDEO OUT
HDMI
AUDIO OUT
Network Video Decoder
INTERNET
Cable Modem
Network Camera
Cable Modem
Broadband
Router
Network Camera
DDNS Server
(Data Center, KOREA)
Local PC
Configuring the network settings of the local PC connected to a
Broadband Router
Configuring the network settings of the local PC connected to a Broadband Router, follow
the instructions below.
 Select : <Network Neighborhood>  <Properties>  <Local Area Connection>
 <Properties>  <General>  <Internet Protocol (TCP/IP)>  <Properties> 
<Obtain an IP address automatically> or <Use the following IP address>.
 Follow the instructions below if you select <Use the following IP address>:
ex1) If the address (LAN IP) of the Broadband Router is 192.168.1.1
IP address : 192.168.1.200
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.1
ex2) If the address (LAN IP) of the Broadband Router is 192.168.0.1
IP address : 192.168.0.200
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.0.1
ex3) If the address (LAN IP) of the Broadband Router is 192.168.xxx.1
IP address : 192.168.xxx.200
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.xxx.1
M
 For the address of the Broadband Router, refer to the product’s documentation.
English _21
● NETWORK CONNECTION AND SETUP
This is for a small network environment such as homes, SOHO and ordinary shops.
network connection and setup
BUTTONS USED IN IP INSTALLER
Item
Description
Device Name
Model name of the connected network device.
Click the column to sort the list by model name.
However, search will be stopped if clicked during the search.
b
Alias
This function is not currently implemented.
c
Mode
Displays either <Static> or <Dynamic> for the current network connection
status.
MAC(Ethernet)
Address
Ethernet address of the connected network device.
Click the column to sort the list by Ethernet address.
However, search will be stopped if clicked during the search.
IP Address
IP address.
Click the column to sort the list by IP address.
However, search will be stopped if clicked during the search.
The factory default is “192.168.1.200”.
Protocol
Network settings of the network device.
The factory default is “IPv4”.
Network encoders with the IPv6 setting will be displayed “IPv6”.
22_ network connection and setup
Item
URL
Shows URL address.
IPv4
Scans for network device with the IPv4 setting.
IPv6
Scans for network device with the IPv6 setting.
Activated in an IPv6 compliant environment.
Search
Scans for network devices that are currently connected to the network.
However, this button will be grayed out if neither IPv4 nor IPv6 is checked.
Auto Set
The IP Installer automatically configures the network settings.
Manual Set
You should configure the network settings manually.
Exit
Exits the IP Installer program.
m
M
 For the IP installer, use only the installer version provided in the installation CD or use the latest
one if available.
You can download the latest version from the Samsung web site (www.samsungipolis.com).
STATIC IP SETUP
Manual Network Setup
Run <IP Installer_vX.XX.exe> to display the network device search list.
At the initial startup, both [Auto Set] and [Manual Set] will be grayed out.
M
 For network devices found with the IPv6 setting, these buttons will be grayed out as the network
devices do not support this function.
1. Select a network device from the
search result.
Find the MAC (Ethernet) address labeled
on the rear of the network device.
Both the [Auto Set] and [Manual Set]
buttons will be activated.
2. Click [Manual Set].
The Manual Setting dialog appears.
The default values of <IP Address>, <Subnet Mask>, <Gateway>, <HTTP Port>
and <VNP Port> of the network device will be displayed.
English _23
● NETWORK CONNECTION AND SETUP
Description
network connection and setup
3. In the <Address> pane, provide the
necessary information.
 MAC (Ethernet) Address : The MAC
(Ethernet) address of the applicable
network device will be set automatically
so you don’t need to input it manually.
M
 You can configure the static IP settings
only if the DHCP checkbox is unchecked.
If not using a Broadband Router
For setting <IP Address>, <Subnet Mask>, and <Gateway>, contact your network
administrator.
4. In the <Port> pane, provide
necessary information.
 HTTP Port : Used to access the
network device using the Internet
browser, defaulted to 80.
Use the spin button to change the
HTTP Port value.
 VNP Port : Used to control video
transfer from a network camera or encoder.
The Network Video Decoder’s VNP port needs no configuration. The default value
is 1234, which is not to be modified.
5. Enter the password.
This is the login password for the “admin” user who accesses the network device.
The default password is “4321”.
J
 The default password can be exposed to a hacking thread so it is recommended to change the
password after installing the product.
Note that the security and other related issues caused by the unchanged password shall be
responsible for the user.
6. Click [OK].
Manual network setup will be completed.
24_ network connection and setup
If using a Broadband Router
M
 The settings may differ depending on the connected Broadband Router model.
For more information, refer to the user manual of the applicable router.
If the Network Video Decoder is connected to a Broadband Router
Configure the IP related settings and the Port related settings distinctly with each other.
Category
Decoder #1
Decoder #2
IP related settings
IP Address
Subnet Mask
Gateway
192.168.1.200
255.255.255.0
192.168.1.1
192.168.1.201
255.255.255.0
192.168.1.1
Port related settings
HTTP Port
8080
8081
M
 If the <HTTP Port> is set other than 80, you must provide the <Port> number in the address bar
of the Internet browser before you can access the Network Video Decoder.
ex) http://IP address : HTTP Port
http://192.168.1.200:8080
English _25
● NETWORK CONNECTION AND SETUP
 IP Address : Enter an address falling in
the IP range provided by the Broadband
Router.
ex) 192.168.1.2~254,
192.168.0.2~254,
192.168.XXX.2~254
 Subnet Mask : The <Subnet Mask>
of the Broadband Router will be the
<Subnet Mask> of the Network Video
Decoder.
 Gateway : The <Local IP Address> of the Broadband Router will be the <Gateway>
of the Network Video Decoder.
network connection and setup
Auto Network Setup
Run <IP Installer_vX.XX.exe> to display the network device search list.
At the initial startup, both [Auto Set] and [Manual Set] will be grayed out.
M
 For network devices found with the IPv6 setting, these buttons will be grayed out as the cameras
do not support this function.
1. Select a network device from the
search result.
Find the MAC (Ethernet) address labeled
on the rear of the network device.
Both the [Auto Set] and [Manual Set]
buttons will be activated.
2. Click [Auto Set].
The Auto Setting dialog appears.
The <IP Address>, <Subnet Mask>, and <Gateway> will be set automatically.
3. Enter the password.
This is the login password for the
“admin” user who accesses the
network video decoder.
The default password is “4321”.
 The default password can be exposed to a
hacking thread so it is recommended to
change the password after installing the
product.
Note that the security and other related
issues caused by the unchanged password
shall be responsible for the user.
4. Click [OK].
Auto network setup will be completed.
26_ network connection and setup
DYNAMIC IP SETUP
Dynamic IP Environment Setup
Checking the Dynamic IP
1. From a local PC, run <IP Installer> to
display a list of network devices that are
assigned <Dynamic IP>.
2. Select a network device in the list,
and click [Manual Set] to check the
<Dynamic IP> of the network device.
If you uncheck <DHCP>, you can
change IP to <Static>.
English _27
● NETWORK CONNECTION AND SETUP
 Example of the Dynamic IP environment
- If a Broadband Router, with a network device connected, is assigned an IP address by the DHCP server
- Network device is connected to a DHCP based modem directly
- If IPs are assigned by the internal DHCP server via the LAN
network connection and setup
CONNECTING TO THE NETWORK DEVICE FROM A
SHARED LOCAL PC
1. Run the IP Installer.
Searches for connected network
devices and displays on the list.
2. Double click the desired network device
to connect to.
The Internet browser starts and
connects to the network device.
M
 You can also access the camera in such way you type the IP address of the found network device
in the address bar of the Internet browser
28_ network connection and setup
web viewer
ACCESSING THE NETWORK VIDEO DECODER
Normally, you would
1. Launch the Internet browser.
● WEB VIEWER
2. Enter the Network Video Decoder’s IP
address into the address field.
ex) • IP address (IPv4) : 192.168.1.200
 http://192.168.1.200
- the Login dialog should appear.
• IP address (IPv6) : 2001:0230:abcd:ffff
:0000:0000:ffff:1111
 http://[2001:230:abcd:ffff:::ffff:1111]
- the Login dialog should appear.
If the HTTP port is other than 80
1. Launch the Internet browser.
2. Enter the Network Video Decoder’s IP address and HTTP port number into the
address field.
ex) IP address : 192.168.1.200:HTTP Port number(8080)
 http://192.168.1.200:8080
- the Login dialog should appear.
English _29
web viewer
LOGIN
The default user ID is “admin”, and the default password is “4321”.
1. Enter “admin” in the <User Name>
input box.
2. Enter “4321” in the <Password> input
box.
If the password is changed, enter the
changed password instead.
3. Click [OK].
Once logged in, the network video
decoder’s setup screen appears.
M
 For security purposes, ensure that you
change the password in <System>
- <User>.
The administrator ID, “admin”, is fixed
and can not be changed.
 The default password can be exposed to a hacking thread so it is recommended to change the
password after installing the product.
Note that the security and other related issues caused by the unchanged password shall be
responsible for the user.
 If you check the “Remember my password” option when your input is done, in future you will be
logged in automatically without being prompted to enter the login information.
J
 If you are using Internet Explorer 7.0 or 8.0 as the default web browser, you can view the best
quality image with a screen ratio of 100%. Reducing the ratio may cut the image on the borders.
30_ web viewer
setup screen
SETUP
You can configure the audio & video, network, event and system settings of the network video
decoder remotely.
 Depending on the firmware version of network camera/encoder, registering such devices to the
network video decoder may fail or work improperly. Visit www.samsungtechwin.com to download
the latest firmware and update it.
AUDIO & VIDEO SETUP
Video & Sequence
1. From the Setup menu, select the
<Audio & Video (
)> tab.
2. Select <Video & Sequence>.
3. Click the input box of each item and
enter / select a desired value.
 Display layout : Select a desired
layout for the monitoring screen from
the single or quad layout.
 Sequence setup: Select whether to
use automatic monitoring sequence,
and select layout and dwell time of the sequenced layout.
 The display automatically cycles through the assigned layouts according to the configured dwell
time in the sequence of the setting. Up to 10 layouts can be selected from the single and quad
layouts and sequenced.
 Single layout : You can add network camera/encoder operating in the network, or
edit/delete registered single layouts.
 It is the basic unit of display layout for network camera/encoder connected to the network video
decoder.
After adding a network camera/encoder’s single layout, select the added single layout’s camera
name to display the network camera/encoder’s video on the monitoring screen.
Up to 20 network cameras or encoders can be added.
 Quad layout: You can composite, edit or delete a 4-split layout by selecting added
single layouts.
 Compose a quad layout by selecting single layouts of network camera/encoder for displaying
4-split monitoring screen.
Assign added single layouts of network cameras/encoders to a quad layout, and select the
composed quad layout to display 4-split screen on the monitor. Up to 8 quad layouts can be added.
English _31
● SETUP SCREEN
J
setup screen
To add a single layout
1. Click the [Add video (
)] button.
2. Enter the network camera/encoder’s
information.
3. Enter the IP address or DDNS URL
of the device to be added into the
<Address> field.
 Up to 64 letters can be entered, and the layout
list displays up to 9 letters and <…> will
appear for the rest.
4. Enter the ID and password for the
device to be added.
)] button
5. Click [Import Properties (
to fetch information on the device to be
connected.
 Check <Include additional user profiles>
to fetch user-defined profiles added to the
device to be connected. For AXIS cameras, all
available profiles are imported regardless of this option.
 Cannot add the camera if it has no profile.
32_ setup screen
6. Enter the <Camera name> after the
fetched information appears.
 The camera name allows no blank space
within the name.
● SETUP SCREEN
 Up to 15 letters can be entered, and the layout
list displays up to 7 letters and <…> will
appear for the rest.
7. Select a profile.
8. Click the [Add (
M
)] button.
 Up to 20 layouts can be added.
 Click [Camera Setting (
)] button to
display a browser for accessing the added
camera’s web page.
Available resolutions for single layout
CODEC
H.264
MPEG-4
MJPEG
Single layout
1920x1080p~ 320x240
4CIF ~ 320x240
1280x720p ~ 320x240
(except 800x600)
English _33
setup screen
To edit existing layout
1. Click the checkbox to select an added
device.
2. Edit the existing information.
 Note that <Protocol> and <Address> fields
are not allowed to edit.
3. Click [Save (
)].
4. To cancel, click the [Cancel (
button.
)]
To delete existing layout
1. Click the checkbox to select an added
device.
2. Click [Delete (
of the layout list.
)] button on the top
3. When a confirmation message appears,
click [OK].
M
 A layout that is used by a <Quad layout> or in the <Sequence setup>, or currently displayed
on the monitoring screen cannot be changed or deleted, and such an attempt will display a
confirmation message.
To set the audio for the added single layout
1. From the list of added single layouts,
set the audio to <ON> or <OFF> to
your preference.
- For a device configured to output
audio, it cannot be switched from
<OFF> to <ON> in quad mode
layout. A confirmation message appears on such an attempt.
- Audio can be selected only when the device’s audio output is set to <ON> in its
single layout configuration.
34_ setup screen
To add a quad layout
1. Click the [Add quad layout (
button.
)]
3. Enter the <Layout name>.
 Up to 15 letters can be entered, and the layout
list displays up to 7 letters and <…> will
appear for the rest.
4. Select the audio output channel of the quad layout from the assigned 4 channels.
You can select a device if the device’s audio is set to <ON> in its single layout.
5. Click the [Add (
M
)] button.
 Up to 8 quad layouts can be added. Note that one single layout cannot be assigned to the same
quad layout multiple times.
However, a single layout can be assigned to multiple quad layouts.
Available resolutions for quad layouts
Some resolutions may not be supported by quad layout of the Network Video Decoder,
depending on the CODEC used.
Selecting a not supported resolution will display an error message.
Before adding, refer to the available resolutions below.
M
CODEC
H.264
Quad layout
1280x720p ~ 320x240
(except 800x600)
MPEG-4
MJPEG
4CIF ~ 320x240
1280x720p ~ 320x240
(except 800x600)
 In Quad mode display of resolution less than 960x540, each video will be centered to its split
screen if all 4 channels’ videos have the same resolution. At the moment, 320x240 and 352x240
video will be enlarged to 640x480 and 704x480 respectively.
<2nd split displays video having resolution of less than 960x540>
English _35
● SETUP SCREEN
2. Select devices from the added single
layouts to be assigned to each channel.
setup screen
To edit a quad layout
1. Click the select checkbox of the desired layout from the list.
2. Make your changes with assigned channel or edit the layout name.
3. Click [Save (
)].
4. To cancel, click the [Cancel (
)] button.
To delete a quad layout
1. Click the select checkbox of the desired
layout from the list.
2. Click the [Delete (
)] button.
3. When a confirmation message appears,
click [OK].
M
 A QUAD layout that is included in the
<Sequence setup>, or currently
displayed on the monitoring screen cannot be changed or deleted, and such an attempt will
display a confirmation message.
36_ setup screen
To set a sequence
)]
1. Press the [Sequence setup (
button.
● SETUP SCREEN
2. Select layouts in the order you want to
display in sequence.
3. Enter the interval of the layout transition.
4. When done, click [Apply (
)].
5. Set the sequence setup to <ON>.
Selected layouts are displayed in
the specified order, switched at the
specified interval.
To select the layout to be displayed on the monitor
You can set a layout to be displayed on a connected monitor.
1. Click the “Display layout” list to display
available layouts.
Select a layout to be displayed on the
screen.
2. When done, click [Apply (
)].
 If the Sequence Setup is set to <ON>, the <Display layout> listbox is disabled.
Display setup
1. From the Setup menu, select the
<Audio & Video (
)> tab.
2. Click <Display setup>.
3. Click the input box of each item and
enter / select a desired value.
 Monitor : Select the target monitor
type for video display.
 Resolution : Select the monitor’s
resolution.
 When selected <CVBS>, the menu will be
changed to <CVBS type>.
English _37
setup screen
 OSD position : Selects the position of the on-screen display menu.
If you change the number of OSD positions it will be moved to set number based
on the entire screen.
 OSD display : Select types of OSD to be
Gate1
01:01:01
b
displayed on the monitor.
Camera name : Shows the camera’s
name used when registering the layout.
b Decoder time : Shows the time set to the
decoder.
192.168.1.201
c
c Alarm / Error : Shows alarm/error on the
monitor when occurred.
IP address : Shows the camera’s IP
address.
Border : Separates each camera’s screen with border lines.
 Preview (
) : Previews changed OSD related settings, and applies when
confirmed.
Applying OSD setup changes does not affect monitor settings.
4. When done, click [Apply (
)].
Audio setup
You can setup audio in/out settings of devices connected to the network video decoder.
1. From the Setup menu, select the
<Audio & Video (
)> tab.
2. Click <Audio setup>.
3. Adjust the audio I/O levels to your
preference.
 Audio output : Set whether to use
audio or not, and its output method.
 Gain : It is enabled when selected <Line out>, and set the value.
M
 Audio is produced only if the device connected supports audio input and set to on.
 To select HDMI audio out, the Monitor setting of Display Setup should be set to HDMI.
4. When done, click [Apply (
38_ setup screen
)].
NETWORK SETUP
Interface
2. Click <Interface>.
3. Set the <Connection mode> and
<IPv6 setup> as necessary.
 IP type : Select an IP connection
type.
- Manual : Specify the IP address,
Subnet Mask, Gateway, DNS1,
and DNS2.
- DHCP : Specify the DNS1 and
DNS2.
 If you set it to <Manual>, you should specify the IP, Subnet mask, Gateway, DNS 1 & 2 manually.






MAC address : Shows the Network Video Decoder’s MAC address.
IP address : Displays the current IP address.
Subnet mask : Displays the <Subnet Mask> for the set IP.
Gateway : Displays the <Gateway> for the set IP.
DNS1/DNS2 : Displays the DNS(Domain Name Service) server address.
HTTP port : HTTP port used to access the Network Video Decoder via the web
browser. The default is 80 (TCP).
 IPv6 use : Specify the use of IPv6.
 IPv6 address : Obtains the IPv6 address to access the IPv6 network.
4. When done, click [Apply (
)].
English _39
● SETUP SCREEN
1. From the Setup menu, select the
<Network (
)> tab.
setup screen
SSL
You can select a secure connection system or install the public certificate for this purpose.
1. From the Setup menu, select the
)> tab.
<Network (
2. Click <SSL>.
3. Select a secure connection system.
 When accessing the Network Video
Decoder using secure HTTPS mode, enter
the IP address into the address field as:
https://<Network Decoder_IP>.
4. Search and add a certificate for the
Network Video Decoder.
To install the certificate to the Network Video Decoder, you need to type in the
certificate name (it can be arbitrarily assigned by user), and specify the certificate file
issued from the authority, and a key file.
 The <HTTPS(Secure connection mode using the public certificate)> item will be active only if
there exists a public certificate installed.
5. When done, click [Apply (
)].
Installing the Certificate
1. Enter the certificate’s name.
2. Select the desired certificate file and its key file, and click [Install (
)] button.
Deleting a certificate
1. Click [Delete (
)] button.
2. To delete a public certificate, you should access the network video decoder in
the mode of <HTTP (Do not use secure connection)> or <HTTPS (Secure
Connection mode using a unique certificate)>.
40_ setup screen
Alarm input
You can set the alarm input type, duration and action type of the Network Video Decoder’s
alarm input port.
● SETUP SCREEN
1. From the Setup menu, select the
<Event (
)> tab.
2. Click <Alarm input>.
3. Select the input device type.
 Type
- Normal open : It is normally open,
but if it is closed, an alarm will be
triggered.
- Normal close : It is normally closed,
but if it is open, an alarm will be
triggered.
4. Specify the <Activation time>.
 Always : Always check if an alarm occurs. It activates in operated mode when the
alarm occurs.
 Only scheduled time : Check if an alarm occurs at a specified day of the week for
a specified time period. It activates in operated mode when the alarm occurs.
5. Set the alarm’s output dwell time when an alarm occurs.
 Alarm output : Specify the alarm output time in the alarm input setup.
 If the alarm out duration is set to <Always>, the alarm continues to function until the alarm
acknowledge button is pressed, as expressed in Audio & Video page.
 Test : Conducts a test alarm for the connected alarm out device.
6. When done, click [Apply (
)].
English _41
setup screen
Event input
You can set the alarm duration and alarm’s action type of the network camera or encoder.
1. From the Setup menu, select the
)> tab.
<Event (
2. Click <Event input>.
3. Specify an event input device.
 Input device setup
- Motion Detection : Recognizes
a detected motion from the
connected device as an alarm.
- Intelligent video : Recognizes a
detected intelligent video analysis
event from the connected device
as an alarm.
- Cam alarm : Recognizes a sensor input event from the connected device as an
alarm.
M
 Operable only when the camera registered to the layout supports applicable function and set to
on.
4. Specify the activation time.
 For <Activation time> setup, refer to “Alarm input”. (Page 41)
5. Set <Alarm out duration> for each alarm.
6. Select the <Layout> for each device’s video display on an event.
If <Quad> mode is selected and the desired single layout is assigned to two quad
layouts, the quad layout having smaller layout number is selected and displayed.
When an event occurs, the layout selected for the event is displayed along with
alarm border and alarm message according to the specified display setup, until the
alarm acknowledge button is pressed in the Audio & Video page.
When the alarm acknowledge button is pressed, the screen returns to the layout
previous to the event.
7. When done, click [Apply (
42_ setup screen
)].
SYSTEM SETUP
Product information
2. Click <Product information>.
3. Check the Network Video Decoder
information, or provide details according
to your network environment.
 Device name : Enter the Network
Video Decoder’s name.
 Location : Describe the location of the installed Network Video Decoder.
 Description : Enter the additional detailed information on the installed Network
Video Decoder.
 Memo : Provide an explanation about the network encoder for better understanding.
 Language : Select a preferred language for the network encoder menus and the
Web Viewer OSD.
4. When done, click [Apply (
)].
Date & Time
1. From the Setup menu, select the
<System (
)> tab.
2. Click <Date & Time>.
3. Set the network video decoder’s
system time.
 Current system time : Displays the
current time settings of your system.
 Timezone : Specify the local time
zone based on the GMT.
 Use daylight saving time : If the region
of installed location is applicable with
DST, you can select whether to apply
DST or not.
English _43
● SETUP SCREEN
1. From the Setup menu, select the
<System (
)> tab.
setup screen
 System time setup : Specify the time and date that will be applied to your system.
- Manual : Specify the time manually.
- Synchronize with NTP server : Sync with the time of the specified server address.
- Synchronize to PC Viewer : Synchronize the time with the connected PC.
4. When done, click [Apply (
M
)].
 If you select the <Synchronize to PC Viewer>, the standard timezone should be set the same
as the current timezone in PC.
User
1. From the Setup menu, select the
<System (
)> tab.
2. Click <User>.
3. Provide the necessary user information.
 Administrator password change :
Change the current password for the
administrator.
 The default password can be exposed to
a hacking thread so it is recommended to
change the password after installing the product.
Note that the security and other related issues caused by the unchanged password shall be
responsible for the user.
 Current user : You can change the user information and adjust the permission level
for a user who is set to <Enable>.
- controls : If set to on, all menu items except the user account administration
can be used.
- Enable : Activates the user account.
4. When done, click [Apply (
44_ setup screen
)].
Upgrade/Reboot
1. From the Setup menu, select the
<System (
)> tab.
2. Click <Upgrade/Reboot>.
To perform the upgrade
1. Click [
2. Click [
upgrade.
].
] and specify a file to
3. Click [Upgrade].
4. The “Update status” dialog appears
where the progression will be shown in
the bottom.
M
 If you forcibly terminate the upgrade
process, upgrade will not be completed
properly.
English _45
● SETUP SCREEN
3. Select a desired item and set it
appropriately.
 Upgrade : Performs upgrading the
system.
 Factory default : Resets the system
to the factory default.
- Except network parameter : Resets all settings except for the Network Parameters.
- All : Resets all settings including the Network Parameters.
 Configuration backup & Restore : Backs up the current system settings before
performing the restoration process. The system is automatically restarts after
backup or restoration.
 Restart : Restarts the system.
setup screen
To save the current settings and restore the backup settings
1. Click [Backup].
The Save As dialog should appear.
2. Specify the backup path with a proper
file name, and click [Save].
The backup file will be saved to the
specified path in the format of “.xml”.
3. To restore the settings from a backup,
select the backup file.
4. Click [Restore].
Once the restoration completes, the
system will restart.
46_ setup screen
Log
You can check the system log or event log.
1. From the Setup menu, select the
)> tab.
<System (
● SETUP SCREEN
2. Click <Log>.
3. Select a log type.
 Syslog : You can check the system
logs where any system changes
are recorded including the time
information.
 Evtlog : You can check the event
logs including the time information.
4. From the right log list, select an item to
search for.
 If you select <All> in the top left dropdown list, all logs for the applicable log type
will be displayed.
5. If one page can not display all the logs available, use the bottom buttons to move to
the previous, next, or the last item.
M
 If you want to view the details of a log, click [Source (
)] in the right column of the log; the log
information will be shown in the bottom pane.
 Each page displays 15 logs with the latest one displayed at the top.
 The event/system log list can contain up to 1000 logs; after that, the existing logs will be deleted
from the oldest one each time a new log is created.
English _47
appendix
SPECIFICATION
Items
Description
1) HDMI / VGA : Max 1920x1080p (same output resolution for
HDMI, VGA) 1920x1080p, 1680x1050, 1600x900, 1440x900,
1280x1024, 1280x720p, 1024 x 768
Video Out
2) CVBS : NTSC : 1.0 Vp-p / 75Ω composite 704x480
PAL : 1.0 Vp-p / 75Ω composite 704x576
3) Select from HDMI/VGA, CVBS
Video Out
1) H.264 : 3.5 seconds in maximum
Video Latency
2) MPEG-4 : 2 seconds in maximum
3) MJPEG : 2 seconds in maximum
Event Trigger
Alarm input, Network camera event input
Alarm I/O
Input 1ea / Output 2ea (Relay)
Ethernet
RJ-45 (10/100/1000BASE-T)
Video Compression
Format
H.264, MPEG-4, MJPEG
1) H.264
- Single View :1920x1080p ~ 320x240
- Quad View : 1280x720p ~ 320x240 (except 800x600)
Network
Resolution
2) MPEG-4 :
- Single View : 4CIF ~ 320x240
- Quad View : 4CIF ~ 320x240
3) MJPEG :
- Single VIew : 1280x720p ~ 320x240 (except 800x600)
- Quad VIew : 1280x720p ~ 320x240 (except 800x600)
1920x1080p, 1280X1024, 1280X720p, 704x576, 704x480,
640x480, 352x288, 352x240, 320x240
48_ appendix
Max. Framerate
Max. 30fps at single view, Max. 120fps at 4x (640x480), Max.
100fps at 4x4 CIF, Max 60fps at 4x720p (when audio is disabled)
Display
Single layout, Quad layout
Items
1 Line Out
Audio Compression
Format
G.711
IP
IPv4, IPv6
Protocol
TCP/IP, UDP/IP, RTP(UDP), RTP(TCP), NTP, HTTP, DHCP, ICMP, IGMP,
ARP, SSL, DNS
HTTPS(SSL) Login Authentication
User access Log
Camera connections
20 cameras, 8 layouts, 10 sequences
ONVIF Conformance
Not supported
Samsung : SNV-3120, SNP-3430H, SNP-3120, 3120V, 3120VH,
SNB-5000, SNB-7000 (Supports profiles of less than 2M), SND-5080/F,
SNV-5080, SNV-5010, SPE-100,400, SPE-1600R/400B
Supported Devices
Axis : P3301, P3343, P3344, P1311, P1343, P1344, P1346,
PTZ215, Q6032, Q7401, Q7404 (F/W ver : 5.x)
1) Stream(Live Video/Audio) : SVNP 1.2 (AXIS : RTP/RTSP)
2) Control/Network alarm : SVNP 1.2 (AXIS : Not supported)
Supported OS : Windows XP / VISTA / 7
Web Viewer
Environmental
Supported Browser : Internet Explorer 7.0 or 8.0, Firefo x2.x, 3.x,
Chrome, Safari
Operating Temperature
+0°C ~ +40°C (+32°F ~ +104°F) / 0% ~ 90% RH
/ Humidity
Input Voltage
DC 12V
Power Consumption
Max. 10W
Color / Material
Silver / Metal
Dimensions (WxHxD)
W178.0 x H34.0 x D128.0mm (W7.00 x H1.33 x D5.03inch)
Weight
530g
Electrical
Mechanical
English _49
● APPENDIX
Audio I/O
Security
Network
Description
appendix
PRODUCT OVERVIEW
107.0 (4.21")
128.0 (5.03")
Unit : mm (inch)
170.0 (6.69”)
34.0 (1.33")
178.0 (7.00”)
50_ appendix
TROUBLESHOOTING
PROBLEM
SOLUTION
Cannot access the Network Video
Decoder with an internet browser.
 Check to make sure that all network cables have been connected
properly.
 For DHCP environment, check whether the Network Video Decoder is
properly assigned with a dynamic IP address.
I cannot connect to the system
using a tab browser of Internet
Explorer 7.0.
 When you try to connect to the system using a tab browser, the same
cookie information is shared, resulting in errors when connected.
Therefore, instead of using a tab browser, open a new browser window
to connect to the system.
IP Installer program fails to search
the Network Video Decoder
installed in the network.
 Turn off the firewall settings on your PC and then search the network
encoder again.
Nothing is displayed on the
monitor.
Monitor displays nothing but the
logo and will not switch to other
screen.
 Check if the monitor is connected to the network video decoder and
matches the output mode.
 Check if the monitor supports and matches the Network Video
Decoder’s output resolution.
 If restarting the network video decoder does the same, press and
hold [RESET] button for about 5 seconds to reset the Network Video
Decoder’s settings.
English _51
● APPENDIX
 If restarting the network video decoder does the same, press and
hold [RESET] button for about 5 seconds to reset the Network Video
Decoder’s settings.
OPEN SOURCE ANNOUNCEMENT
Some software components of this product incorporate source code covered under the BSD
license as follows.
Component Name
License
License URL
lighttpd 1.4.25
librtp 1.20
Live555
BSD 2.0
BSD 1.0
GPL 2.1
http://www.opensource.org/licenses/bsd-license.html
http://www.opensource.org/licenses/LGPL-2.1
lighttpd is a secure, fast, compliant, and very flexible web-server that has been optimized for
high-performance environments. It has a very low memory footprint compared to other
webservers and takes care of cpu-load. Its advanced feature-set (FastCGI, CGI, Auth,
Output-Compression, URL-Rewriting and many more) make lighttpd the perfect webserversoftware for every server that suffers load problems.
For more additional information, send email to help.cctv@samsung.com.
Copyright (C) 2004, Kneschke, incremental
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met :
- Redistributions of source code must retain the above copyright notice, this list of conditions and
the following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice, this list of conditions
and the following disclaimer in the documentation and/or other materials provided with the
distribution.
- Neither the name of the 'incremental' nor the names of its contributors may be used to endorse
or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Copyright (c) 1998-2001 University College London
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, is permitted
provided that the following conditions are met :
1. Redistributions of source code must retain the above copyright notice, this list of conditions
and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions
and the following disclaimer in the documentation and/or other materials provided with the
distribution.
3. All advertising materials mentioning features or use of this software must display the following
acknowledgement: This product includes software developed by the Computer Science
Department at University College London.
4. Neither the name of the University nor of the Department may be used to endorse or promote
products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND ANY
EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSEARE
DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
GPL/LGPL SOFTWARE LICENSE
The software included in this product contains copyrighted software that is licensed
under the GPL/LGPL. You may obtain the complete Corresponding Source code from us
for a period of three years after our last shipment of this product by sending email to
help.cctv@samsung.com
If you want to obtain the complete Corresponding Source code in the physical medium
such as CD-ROM, the cost of physically performing source distribution might be charged.
• GPL S/W
- Base Kernel, Busybox, Sysvinit, dosfstools
• LGPL S/W
- gLibc, Inetutils
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C)1989, 1991 Free Software
Foundation, Inc.
51 Franklin Street,Fifth Floor, Boston,
MA 02110-1301, USA
Everyone is permitted to copy and
distribute verbatim copies of this license
document, but changing it is not allowed.
Preamble
The licenses for most software are designed
to take away your freedom to share and
change it. By contrast, the GNU General
Public License is intended to guarantee
your freedom to share and change free
software-- to make sure the software is free
for all its users.
This General Public License applies to most
of the Free Software Foundation's software
and to any other program whose authors
commit to using it. (Some other Free Software
Foundation software is covered by the GNU
Lesser General Public License instead.) You
can apply it to your programs, too.
When we speak of free software, we are
referring to freedom, not price.
Our General Public Licenses are designed
to make sure that you have the freedom
to distribute copies of free software (and
charge for this service if you wish), that
you receive source code or can get it if you
want it, that you can change the software
or use pieces of it in new free programs ;
and that you know you can do these things.
To protect your rights, we need to make
restrictions that forbid anyone to deny you
these rights or to ask you to surrender the
rights. These restrictions translate to certain
responsibilities for you if you distribute
copies of the software, or if you modify it.
For example, if you distribute copies of
such a program, whether gratis or for a fee,
you must give the recipients all the rights
that you have.
You must make sure that they, too, receive or
can get the source code. And you must show
them these terms so they know their rights.
We protect your rights with two steps :
(1)copyright the software, and (2)offer
you this license which gives you legal
permission to copy, distribute and/or modify
the software.
Also, for each author's protection and ours,
we want to make certain that everyone
understands that there is no warranty for
this free software. If the software is modified
by someone else and passed on, we want
its recipients to know that what they have
is not the original, so that any problems
introduced by others will not reflect on the
original authors' reputations.
Finally, any free program is threatened
constantly by software patents. We wish
to avoid the danger that redistributors of a
free program will individually obtain patent
licenses, in effect making the program
proprietary. To prevent this, we have made
it clear that any patent must be licensed for
everyone's free use or not licensed at all.
The precise terms and conditions for
copying, distribution and modification follow.
TERMS AND CONDITIONS FOR
COPYING, DISTRIBUTION AND
MODIFICATION
Version 2, June 1991 Copyright (C) 1989,
1991 Free Software Foundation, Inc. 51
Franklin S
0. This License applies to any program
or other work which contains a notice
placed by the copyright holder saying it
may be distributed under the terms of this
General Public License.
The "Program", below, refers to any such
program or work, and a "work based on
the Program" means either the Program
or any derivative work under copyright
law : that is to say, a work containing the
Program or a portion of it, either verbatim
or with modifications and/or translated
into another language. (Hereinafter,
translation is included without limitation in
the term "modification".) Each licensee is
addressed as "you".
Activities other than copying, distribution
and modification are not covered by
this License ; they are outside its scope.
The act of running the Program is not
restricted, and the output from the
Program is covered only if its contents
constitute a work based on the Program
(independent of having been made by
running the Program). Whether that is true
depends on what the Program does.
1. You may copy and distribute verbatim
copies of the Program's source code as
you receive it, in any medium, provided
that you conspicuously and appropriately
publish on each copy an appropriate
copyright notice and disclaimer of
warranty; keep intact all the notices that
refer to this License and to the absence
of any warranty ; and give any other
recipients of the Program a copy of this
License along with the Program.
You may charge a fee for the physical act
of transferring a copy, and you may at
your option offer warranty protection in
exchange for a fee.
2. You may modify your copy or copies
of the Program or any portion of it,
thus forming a work based on the
Program, and copy and distribute such
modifications or work under the terms of
Section 1 above, provided that you also
meet all of these conditions :
a) You must cause the modified files to
carry prominent notices stating that
you changed the files and the date of
any change.
b) You must cause any work that you
distribute or publish, that in whole or
in part contains or is derived from the
Program or any part thereof, to be
licensed as a whole at no charge to
all third parties under the terms of this
License.
c) If the modified program normally reads
commands interactively when run,you
must cause it, when started running
for such interactive use in the most
ordinary way, to print or display an
announcement including an appropriate
copyright notice and a notice that there
is no warranty (or else, saying that you
provide a warranty) and that users
may redistribute the program under
these conditions, and telling the user
how to view a copy of this License.
(Exception:if the Program itself is
interactive but does not normally print
such an announcement, your work
based on the Program is not required
to print an announcement.)
These requirements apply to the modified
work as a whole. If identifiable sections of
that work are not derived from the Program,
and can be reasonably considered
independent and separate works in
themselves, then this License, and its
terms, do not apply to those sections when
you distribute them as separate works. But
when you distribute the same sections as
part of a whole which is a work based on
the Program, the distribution of the whole
must be on the terms of this License,
whose permissions for other licensees
extend to the entire whole, and thus to
each and every part regardless of who
wrote it.
Thus, it is not the intent of this section to
claim rights or contest your rights to work
written entirely by you ; rather, the intent is to
exercise the right to control the distribution
of derivative or collective works based on
the Program. In addition, mere aggregation
of another work not based on the Program
with the Program (or with a work based on
the Program)on a volume of a storage or
distribution medium does not bring the other
work under the scope of this License.
3. You may copy and distribute the
Program (or a work based on it, under
Section 2)in object code or executable
form under the terms of Sections 1 and
2 above provided that you also do one of
the following :
a) Accompany it with the complete
corresponding machine-readable
source code, which must be distributed
under the terms of Sections 1 and 2
above on a medium customarily used
for software interchange ; or,
b) Accompany it with a written offer,
valid for at least three years, to give
any third party, for a charge no
more than your cost of physically
performing source distribution, a
complete machinereadable copy
of the corresponding source code,
to be distributed under the terms
of Sections 1 and 2 above on a
medium customarily used for software
interchange ; or,
c) Accompany it with the information
you received as to the offer to
distribute corresponding source code.
(This alternative is allowed only for
noncommercial distribution and only
if you received the program in object
code or executable form with such
an offer, in accord with Subsection b
above.)
The source code for a work means the
preferred form of the work for making
modifications to it. For an executable work,
complete source code means all the source
code for all modules it contains, plus any
associated interface definition files, plus
the scripts used to control compilation and
installation of the executable. However,
as a special exception, the source code
distributed need not include anything that
is normally distributed (in either source or
binary form)with the major components
(compiler, kernel, and so on)of the operating
system on which the executable runs,
unless that component itself accompanies
the executable.
If distribution of executable or object code
is made by offering access to copy from a
designated place, then offering equivalent
access to copy the source code from the
same place counts as distribution of the
source code, even though third parties are
not compelled to copy the source along
with the object code.
4. You may not copy, modify, sublicense,
or distribute the Program except as
expressly provided under this License.
Any attempt otherwise to copy, modify,
sublicense or distribute the Program is
void, and will automatically terminate your
rights under this License.
However, parties who have received
copies, or rights, from you under this
License will not have their licenses
terminated so long as such parties remain
in full compliance.
5. You are not required to accept this
License, since you have not signed it.
However, nothing else grants you
permission to modify or distribute the
Program or its derivative works.
These actions are prohibited by law if you
do not accept this License.Therefore, by
modifying or distributing the Program (or
any work based on the Program), you
indicate your acceptance of this License
to do so, and all its terms and conditions
for copying, distributing or modifying the
Program or works based on it.
6. Each time you redistribute the Program
(or any work based on the Program),
the recipient automatically receives a
license from the original licensor to copy,
distribute or modify the Program subject
to these terms and conditions.
You may not impose any further
restrictions on the recipients' exercise of
the rights granted herein.
You are not responsible for enforcing
compliance by third parties to this
License.
7. If, as a consequence of a court judgment
or allegation of patent infringement or for
any other reason (not limited to patent
issues), conditions are imposed on you
(whether by court order, agreement or
otherwise)that contradict the conditions
of this License, they do not excuse you
from the conditions of this License. If
you cannot distribute so as to satisfy
simultaneously your obligations under
this License and any other pertinent
obligations, then as a consequence you
may not distribute the Program at all.
For example, if a patent license would not
permit royalty-free redistribution of the
Program by all those who receive copies
directly or indirectly through you, then the
only way you could satisfy both it and this
License would be to refrain entirely from
distribution of the Program.
If any portion of this section is held invalid
or unenforceable under any particular
circumstance, the balance of the section
is intended to apply and the section as
a whole is intended to apply in other
circumstances. It is not the purpose of
this section to induce you to infringe any
patents or other property right claims or
to contest validity of any such claims; this
section has the sole purpose of protecting
the integrity of the free software distribution
system, which is implemented by public
license practices. Many people have made
generous contributions to the wide range
of software distributed through that system
in reliance on consistent application of that
system ; it is up to the author/donor to
decide if he or she is willing to distribute
software through any other system and a
licensee cannot impose that choice.
This section is intended to make thoroughly
clear what is believed to be a consequence
of the rest of this License.
8. If the distribution and/or use of the
Program is restricted in certain countries
either by patents or by copyrighted
interfaces, the original copyright holder
who places the Program under this
License may add an explicit geographical
distribution limitation excluding those
countries,so that distribution is permitted
only in or among countries not thus
excluded. In such case, this License
incorporates the limitation as if written in
the body of this License.
9. The Free Software Foundation may
publish revised and/or new versions of
the General Public License from time to
time. Such new versions will be similar
in spirit to the present version, but may
differ in detail to address new problems
or concerns.
Each version is given a distinguishing
version number. If the Program specifies
a version number of this License which
applies to it and "any later version", you
have the option of following the terms and
conditions either of that version or of any
later version published by the Free Software
Foundation. If the Program does not specify
a version number of this License, you may
choose any version ever published by the
Free Software Foundation.
10. If you wish to incorporate parts of the
Program into other free programs whose
distribution conditions are different, write
to the author to ask for permission.
For software which is copyrighted by
the Free Software Foundation,write
to the Free Software Foundation ; we
sometimes make exceptions for this.
Our decision will be guided by the two
goals of preserving the free status of
all derivatives of our free software and
of promoting the sharing and reuse of
software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS
LICENSED FREE OF CHARGE,
THERE IS NO WARRANTY FOR
THE PROGRAM, TO THE EXTENT
PERMITTED BY APPLICABLE LAW.
EXCEPT WHEN OTHERWISE STATED IN
WRITING THE COPYRIGHT HOLDERS
AND/OR OTHER PARTIES PROVIDE
THE PROGRAM "ASIS" WITHOUT
WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO
THE QUALITY AND PERFORMANCE OF
THE PROGRAM IS WITH YOU. SHOULD
THE PROGRAMPROVE DEFECTIVE,
YOU ASSUME THE COST OF ALL
NECESSARY SERVICING, REPAIR OR
CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY
APPLICABLE LAW OR AGREED TO
IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO
MAY MODIFY AND/OR REDISTRIBUTE
DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO
USE THE PROGRAM (INCLUDING BUT
NOT LIMITED TO LOSS OF DATA OR
DATA BEING RENDERED INACCURATE
OR LOSSES SUSTAINED BY YOU OR
THIRD PARTIES OR A FAILURE OF THE
PROGRAM TO OPERATE WITH ANY
OTHER PROGRAMS), EVEN IF SUCH
HOLDER OR OTHER PARTY HAS
BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your
New Programs
If you develop a new program, and you
want it to be of the greatest possible use to
the public, the best way to achieve this is to
make it free software which everyone can
redistribute and change under these terms.
To do so, attach the following notices to the
program. It is safest to attach them to the
start of each source file to most effectively
convey the exclusion of warranty ; and each
file should have at least the "copyright"
line and a pointer to where the full notice is
found.
one line to give the program's name and an
idea of what it does.
Copyright (C)yyyy name of author
This program is free software ; you can
redistribute it and/or modify it under the
terms of the GNU General Public License as
published by the Free Software Foundation
; either version 2 of the License, or (at your
option)any later version.
This program is distributed in the hope
that it will be useful, but WITHOUT ANY
WARRANTY ; without even the implied
warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for
more details.
You should have received a copy of the
GNU General Public License along with this
program ; if not, write to the Free Software
Foundation, Inc.,51 Franklin Street, Fifth
Floor, Boston, MA 02110-1301, USA.
Also add information on how to contact you
by electronic and paper mail. If the program
is interactive, make it output a short notice
like this when it starts in an interactive
mode :
this is what you want to do, use the GNU
Lesser General Public License instead of
this License.
GNU GENERAL PUBLIC LICENSE
Version 3, 29 June 2007
Copyright © 2007 Free Software Foundation,
Inc. <http://fsf.org/>
Everyone is permitted to copy and distribute
verbatim copies of this license document, but
changing it is not allowed.
Gnomovision version 69,
Preamble
Copyright (C) year name of author
The GNU General Public License is a free,
copyleft
Gnomovision comes with ABSOLUTELY
NO
WARRANTY ; for details type ‘show w’.
This is free software, and you are welcome
to redistribute it under certain conditions ;
type ‘show c’ for details.
The hypothetical commands ‘show w’ and
‘show c’ should show the appropriate parts
of the General Public License. Of course,
the commands you use may be called
something other than ‘show w’ and ‘show
c’ ; they could even be mouse-clicks or
menu items-- whatever suits your program.
You should also get your employer (if you
work as a programmer)or your school, if
any, to sign a "copyright disclaimer" for the
program,if necessary. Here is a sample ;
alter the names:
Yoyodyne, Inc.,hereby disclaims all
copyright interest in the program
‘Gnomovision’ (which makes passes at
compilers) written by James Hacker.
signature of Ty Coon, 1 April 1989 Ty
Coon, President of Vice This General Public
License does not permit incorporating your
program into proprietary programs. If your
program is a subroutine library, you may
consider it more useful to permit linking
proprietary applications with the library. If
license for software and other kinds of
works. The licenses for most software and
other practical works are designed to take
away your freedom to share and change
the works. By contrast, the GNU General
Public License is intended to guarantee
your freedom to share and change all
versions of a program--to make sure it
remains free software for all its users.
We, the Free Software Foundation, use the
GNU General Public License for most of
our software; it applies also to any other
work released this way by its authors.
You can apply it to your programs, too.
When we speak of free software, we are
referring to freedom, not price. Our General
Public Licenses are designed to make sure
that you have the freedom to distribute
copies of free software (and charge for
them if you wish), that you receive source
code or can get it if you want it, that you
can change the software or use pieces of
it in new free programs, and that you know
you can do these things.
To protect your rights, we need to prevent
others from denying you these rights
or asking you to surrender the rights.
Therefore, you have certain responsibilities
if you distribute copies of the software, or if
you modify it: responsibilities to respect the
freedom of others.
For example, if you distribute copies of
such a program, whether gratis or for a
fee, you must pass on to the recipients the
same freedoms that you received. You must
make sure that they, too, receive or can get
the source code. And you must show them
these terms so they know their rights.
Developers that use the GNU GPL protect
your rights with two steps: (1) assert
copyright on the software, and (2) offer you
this License giving you legal permission to
copy, distribute and/or modify it.
For the developers' and authors'
protection, the GPL clearly explains that
there is no warranty for this free software.
For both users' and authors' sake, the GPL
requires that modified versions be marked
as changed, so that their problems will
not be attributed erroneously to authors of
previous versions.
Some devices are designed to deny users
access to install or run modified versions
of the software inside them, although
the manufacturer can do so. This is
fundamentally incompatible with the aim
of protecting users' freedom to change
the software. The systematic pattern of
such abuse occurs in the area of products
for individuals to use, which is precisely
where it is most unacceptable. Therefore,
we have designed this version of the GPL
to prohibit the practice for those products.
If such problems arise substantially in
other domains, we stand ready to extend
this provision to those domains in future
versions of the GPL, as needed to protect
the freedom of users.
Finally, every program is threatened
constantly by software patents. States
should not allow patents to restrict
development and use of software on
general-purpose computers, but in those
that do, we wish to avoid the special danger
that patents applied to a free program
could make it effectively proprietary. To
prevent this, the GPL assures that patents
cannot be used to render the program nonfree.
The precise terms and conditions for
copying, distribution and modification
follow.
TERMS AND CONDITIONS
0. Definitions.
“This License” refers to version 3 of the GNU
General Public License.
“Copyright” also means copyright-like laws
that apply to other kinds of works, such as
semiconductor masks.
“The Program” refers to any copyrightable
work licensed under this License. Each
licensee is addressed as “you”. “Licensees”
and “recipients” may be individuals or
organizations.
To “modify” a work means to copy from or
adapt all or part of the work in a fashion
requiring copyright permission, other than the
making of an exact copy. The resulting work is
called a “modified version” of the earlier work
or a work “based on” the earlier work.
A “covered work” means either the unmodified
Program or a work based on the Program.
To “propagate” a work means to do anything
with it that, without permission, would
make you directly or secondarily liable for
infringement under applicable copyright
law, except executing it on a computer
or modifying a private copy. Propagation
includes copying, distribution (with or without
modification), making available to the public,
and in some countries other activities as well.
To “convey” a work means any kind of
propagation that enables other parties to
make or receive copies. Mere interaction with
a user through a computer network, with no
transfer of a copy, is not conveying.
An interactive user interface displays
“Appropriate Legal Notices” to the extent
that it includes a convenient and prominently
visible feature that (1) displays an appropriate
copyright notice, and (2) tells the user that
there is no warranty for the work (except
to the extent that warranties are provided),
that licensees may convey the work under
this License, and how to view a copy of this
License. If the interface presents a list of user
commands or options, such as a menu, a
prominent item in the list meets this criterion.
1. Source Code.
The “source code” for a work means the
preferred form of the work for making
modifications to it. “Object code” means any
non-source form of a work.
A “Standard Interface” means an interface
that either is an official standard defined
by a recognized standards body, or, in the
case of interfaces specified for a particular
programming language, one that is widely
used among developers working in that
language.
The “System Libraries” of an executable
work include anything, other than the work
as a whole, that (a) is included in the normal
form of packaging a Major Component, but
which is not part of that Major Component,
and (b) serves only to enable use of the
work with that Major Component, or to
implement a Standard Interface for which
an implementation is available to the public
in source code form. A “Major Component”,
in this context, means a major essential
component (kernel, window system, and so
on) of the specific operating system (if any) on
which the executable work runs, or a compiler
used to produce the work, or an object code
interpreter used to run it.
The “Corresponding Source” for a work
in object code form means all the source
code needed to generate, install, and (for
an executable work) run the object code
and to modify the work, including scripts
to control those activities. However, it does
not include the work's System Libraries, or
general-purpose tools or generally available
free programs which are used unmodified in
performing those activities but which are not
part of the work. For example, Corresponding
Source includes interface definition files
associated with source files for the work,
and the source code for shared libraries and
dynamically linked subprograms that the work
is specifically designed to require, such as by
intimate data communication or control flow
between those subprograms and other parts
of the work.
The Corresponding Source need not
include anything that users can regenerate
automatically from other parts of the
Corresponding Source.
The Corresponding Source for a work in
source code form is that same work.
2. Basic Permissions.
All rights granted under this License are
granted for the term of copyright on the
Program, and are irrevocable provided the
stated conditions are met. This License
explicitly affirms your unlimited permission to
run the unmodified Program. The output from
running a covered work is covered by this
License only if the output, given its content,
constitutes a covered work. This License
acknowledges your rights of fair use or other
equivalent, as provided by copyright law.
You may make, run and propagate covered
works that you do not convey, without
conditions so long as your license otherwise
remains in force. You may convey covered
works to others for the sole purpose of having
them make modifications exclusively for you,
or provide you with facilities for running those
works, provided that you comply with the
terms of this License in conveying all material
for which you do not control copyright. Those
thus making or running the covered works for
you must do so exclusively on your behalf,
under your direction and control, on terms
that prohibit them from making any copies
of your copyrighted material outside their
relationship with you.
Conveying under any other circumstances is
permitted solely under the conditions stated
below. Sublicensing is not allowed; section 10
makes it unnecessary.
3. Protecting Users' Legal Rights From
Anti-Circumvention Law.
No covered work shall be deemed part of an
effective technological measure under any
applicable law fulfilling obligations under article
11 of the WIPO copyright treaty adopted on
20 December 1996, or similar laws prohibiting
or restricting circumvention of such measures.
When you convey a covered work, you waive
any legal power to forbid circumvention of
technological measures to the extent such
circumvention is effected by exercising rights
under this License with respect to the covered
work, and you disclaim any intention to limit
operation or modification of the work as a
means of enforcing, against the work's users,
your or third parties' legal rights to forbid
circumvention of technological measures.
4. Conveying Verbatim Copies.
You may convey verbatim copies of the
Program's source code as you receive it, in
any medium, provided that you conspicuously
and appropriately publish on each copy an
appropriate copyright notice; keep intact
all notices stating that this License and any
non-permissive terms added in accord with
section 7 apply to the code; keep intact all
notices of the absence of any warranty; and
give all recipients a copy of this License along
with the Program.
You may charge any price or no price for
each copy that you convey, and you may offer
support or warranty protection for a fee.
5. Conveying Modified Source Versions.
You may convey a work based on the
Program, or the modifications to produce it
from the Program, in the form of source code
under the terms of section 4, provided that
you also meet all of these conditions:
a) The work must carry prominent notices
stating that you modified it, and giving a
relevant date.
b) The work must carry prominent notices
stating that it is released under this License
and any conditions added under section 7.
This requirement modifies the requirement
in section 4 to “keep intact all notices”.
c) You must license the entire work, as a
whole, under this License to anyone who
comes into possession of a copy. This
License will therefore apply, along with
any applicable section 7 additional terms,
to the whole of the work, and all its parts,
regardless of how they are packaged. This
License gives no permission to license
the work in any other way, but it does not
invalidate such permission if you have
separately received it.
d) If the work has interactive user interfaces,
each must display Appropriate Legal
Notices; however, if the Program has
interactive interfaces that do not display
Appropriate Legal Notices, your work need
not make them do so.
A compilation of a covered work with other
separate and independent works, which are
not by their nature extensions of the covered
work, and which are not combined with it
such as to form a larger program, in or on a
volume of a storage or distribution medium,
is called an “aggregate” if the compilation and
its resulting copyright are not used to limit
the access or legal rights of the compilation's
users beyond what the individual works
permit. Inclusion of a covered work in an
aggregate does not cause this License to
apply to the other parts of the aggregate.
6. Conveying Non-Source Forms.
You may convey a covered work in object
code form under the terms of sections 4 and 5,
provided that you also convey the machinereadable Corresponding Source under the
terms of this License, in one of these ways:
a) Convey the object code in, or embodied
in, a physical product (including a physical
distribution medium), accompanied by the
Corresponding Source fixed on a durable
physical medium customarily used for
software interchange.
b) Convey the object code in, or embodied
in, a physical product (including a physical
distribution medium), accompanied by a
written offer, valid for at least three years
and valid for as long as you offer spare parts
or customer support for that product model,
to give anyone who possesses the object
code either (1) a copy of the Corresponding
Source for all the software in the product
that is covered by this License, on a durable
physical medium customarily used for
software interchange, for a price no more
than your reasonable cost of physically
performing this conveying of source, or (2)
access to copy the Corresponding Source
from a network server at no charge.
c) Convey individual copies of the object
code with a copy of the written offer to
provide the corresponding Source. This
alternative is allowed only occasionally and
noncommercially, and only if you received
the object code with such an offer, in accord
with subsection 6b.
d) Convey the object code by offering access
from a designated place (gratis or for a
charge), and offer equivalent access to
the Corresponding Source in the same
way through the same place at no further
charge. You need not require recipients
to copy the Corresponding Source along
with the object code. If the place to copy
the object code is a network server, the
Corresponding Source may be on a different
server (operated by you or a third party)
that supports equivalent copying facilities,
provided you maintain clear directions next
to the object code saying where to find the
Corresponding Source. Regardless of what
server hosts the Corresponding Source, you
remain obligated to ensure that it is available
for as long as needed to satisfy these
requirements.
e) Convey the object code using peer-topeer transmission, provided you inform
other peers where the object code and
Corresponding Source of the work are being
offered to the general public at no charge
under subsection 6d.
A separable portion of the object code,
whose source code is excluded from the
Corresponding Source as a System Library,
need not be included in conveying the object
code work.
A “User Product” is either (1) a “consumer
product”, which means any tangible personal
property which is normally used for personal,
family, or household purposes, or (2) anything
designed or sold for incorporation into a
dwelling. In determining whether a product is
a consumer product, doubtful cases shall be
resolved in favor of coverage. For a particular
product received by a particular user, “normally
used” refers to a typical or common use of
that class of product, regardless of the status
of the particular user or of the way in which
the particular user actually uses, or expects or
is expected to use, the product. A product is
a consumer product regardless of whether the
product has substantial commercial, industrial
or non-consumer uses, unless such uses
represent the only significant mode of use of
the product.
“Installation Information” for a User
Product means any methods, procedures,
authorization keys, or other information
required to install and execute modified
versions of a covered work in that User
Product from a modified version of its
Corresponding Source. The information
must suffice to ensure that the continued
functioning of the modified object code is in
no case prevented or interfered with solely
because modification has been made.
If you convey an object code work under this
section in, or with, or specifically for use in,
a User Product, and the conveying occurs
as part of a transaction in which the right of
possession and use of the User Product is
transferred to the recipient in perpetuity or for
a fixed term (regardless of how the transaction
is characterized), the Corresponding Source
conveyed under this section must be
accompanied by the Installation Information.
But this requirement does not apply if neither
you nor any third party retains the ability
to install modified object code on the User
Product (for example, the work has been
installed in ROM).
The requirement to provide Installation
Information does not include a requirement to
continue to provide support service, warranty,
or updates for a work that has been modified
or installed by the recipient, or for the User
Product in which it has been modified or
installed. Access to a network may be
denied when the modification itself materially
and adversely affects the operation of the
network or violates the rules and protocols for
communication across the network.
Corresponding Source conveyed, and
Installation Information provided, in accord with
this section must be in a format that is publicly
documented (and with an implementation
available to the public in source code form),
and must require no special password or key
for unpacking, reading or copying.
7. Additional Terms.
“Additional permissions” are terms that
supplement the terms of this License by
making exceptions from one or more of its
conditions. Additional permissions that are
applicable to the entire Program shall be
treated as though they were included in this
License, to the extent that they are valid under
applicable law. If additional permissions apply
only to part of the Program, that part may be
used separately under those permissions,
but the entire Program remains governed by
this License without regard to the additional
permissions.
When you convey a copy of a covered work,
you may at your option remove any additional
permissions from that copy, or from any part
of it. (Additional permissions may be written
to require their own removal in certain cases
when you modify the work.) You may place
additional permissions on material, added by
you to a covered work, for which you have or
can give appropriate copyright permission.
Notwithstanding any other provision of this
License, for material you add to a covered
work, you may (if authorized by the copyright
holders of that material) supplement the terms
of this License with terms:
a) Disclaiming warranty or limiting liability
differently from the terms of sections 15 and
16 of this License; or
b) Requiring preservation of specified
reasonable legal notices or author
attributions in that material or in the
Appropriate Legal Notices displayed by
works containing it; or
c) Prohibiting misrepresentation of the origin
of that material, or requiring that modified
versions of such material be marked in
reasonable ways as different from the
original version; or
d) Limiting the use for publicity purposes
of names of licensors or authors of the
material; or
e) Declining to grant rights under trademark
law for use of some trade names,
trademarks, or service marks; or
f) Requiring indemnification of licensors and
authors of that material by anyone who
conveys the material (or modified versions
of it) with contractual assumptions of liability
to the recipient, for any liability that these
contractual assumptions directly impose on
those licensors and authors.
All other non-permissive additional terms
are considered “further restrictions” within
the meaning of section 10. If the Program
as you received it, or any part of it, contains
a notice stating that it is governed by this
License along with a term that is a further
restriction, you may remove that term. If a
license document contains a further restriction
but permits relicensing or conveying under
this License, you may add to a covered
work material governed by the terms of that
license document, provided that the further
restriction does not survive such relicensing or
conveying.
If you add terms to a covered work in accord
with this section, you must place, in the
relevant source files, a statement of the
additional terms that apply to those files, or a
notice indicating where to find the applicable
terms.
Additional terms, permissive or nonpermissive, may be stated in the form of
a separately written license, or stated as
exceptions; the above requirements apply
either way.
8. Termination.
You may not propagate or modify a covered
work except as expressly provided under this
License. Any attempt otherwise to propagate
or modify it is void, and will automatically
terminate your rights under this License
(including any patent licenses granted under
the third paragraph of section 11).
However, if you cease all violation of this
License, then your license from a particular
copyright holder is reinstated (a) provisionally,
unless and until the copyright holder explicitly
and finally terminates your license, and (b)
permanently, if the copyright holder fails to
notify you of the violation by some reasonable
means prior to 60 days after the cessation.
Moreover, your license from a particular
copyright holder is reinstated permanently
if the copyright holder notifies you of the
violation by some reasonable means, this
is the first time you have received notice of
violation of this License (for any work) from
that copyright holder, and you cure the
violation prior to 30 days after your receipt of
the notice.
Termination of your rights under this section
does not terminate the licenses of parties
who have received copies or rights from you
under this License. If your rights have been
terminated and not permanently reinstated,
you do not qualify to receive new licenses for
the same material under section 10.
9. Acceptance Not Required for Having
Copies.
You are not required to accept this License
in order to receive or run a copy of the
Program. Ancillary propagation of a covered
work occurring solely as a consequence of
using peer-to-peer transmission to receive a
copy likewise does not require acceptance.
However, nothing other than this License
grants you permission to propagate or modify
any covered work. These actions infringe
copyright if you do not accept this License.
Therefore, by modifying or propagating a
covered work, you indicate your acceptance
of this License to do so.
10. Automatic Licensing of Downstream
Recipients.
Each time you convey a covered work, the
recipient automatically receives a license
from the original licensors, to run, modify
and propagate that work, subject to this
License. You are not responsible for enforcing
compliance by third parties with this License.
An “entity transaction” is a transaction
transferring control of an organization, or
substantially all assets of one, or subdividing
an organization, or merging organizations.
If propagation of a covered work results
from an entity transaction, each party to that
transaction who receives a copy of the work
also receives whatever licenses to the work
the party's predecessor in interest had or
could give under the previous paragraph, plus
a right to possession of the Corresponding
Source of the work from the predecessor in
interest, if the predecessor has it or can get it
with reasonable efforts.
You may not impose any further restrictions
on the exercise of the rights granted or
affirmed under this License. For example, you
may not impose a license fee, royalty, or other
charge for exercise of rights granted under
this License, and you may not initiate litigation
(including a cross-claim or counterclaim in
a lawsuit) alleging that any patent claim is
infringed by making, using, selling, offering for
sale, or importing the Program or any portion
of it.
11. Patents.
A “contributor” is a copyright holder who
authorizes use under this License of the
Program or a work on which the Program is
based. The work thus licensed is called the
contributor's “contributor version”.
A contributor's “essential patent claims” are
all patent claims owned or controlled by the
contributor, whether already acquired or
hereafter acquired, that would be infringed
by some manner, permitted by this License,
of making, using, or selling its contributor
version, but do not include claims that would
be infringed only as a consequence of further
modification of the contributor version. For
purposes of this definition, “control” includes
the right to grant patent sublicenses in a
manner consistent with the requirements of
this License.
Each contributor grants you a non-exclusive,
worldwide, royalty-free patent license under
the contributor's essential patent claims, to
make, use, sell, offer for sale, import and
otherwise run, modify and propagate the
contents of its contributor version.
In the following three paragraphs, a “patent
license” is any express agreement or
commitment, however denominated, not
to enforce a patent (such as an express
permission to practice a patent or covenant
not to sue for patent infringement). To “grant”
such a patent license to a party means to
make such an agreement or commitment not
to enforce a patent against the party.
If you convey a covered work, knowingly
relying on a patent license, and the
Corresponding Source of the work is not
available for anyone to copy, free of charge
and under the terms of this License, through
a publicly available network server or other
readily accessible means, then you must
either (1) cause the Corresponding Source
to be so available, or (2) arrange to deprive
yourself of the benefit of the patent license
for this particular work, or (3) arrange, in a
manner consistent with the requirements of
this License, to extend the patent license to
downstream recipients. “Knowingly relying”
means you have actual knowledge that, but
for the patent license, your conveying the
covered work in a country, or your recipient's
use of the covered work in a country, would
infringe one or more identifiable patents in that
country that you have reason to believe are
valid.
If, pursuant to or in connection with a single
transaction or arrangement, you convey, or
propagate by procuring conveyance of, a
covered work, and grant a patent license to
some of the parties receiving the covered
work authorizing them to use, propagate,
modify or convey a specific copy of the
covered work, then the patent license you
grant is automatically extended to all
recipients of the covered work and works
based on it.
A patent license is “discriminatory” if it does
not include within the scope of its coverage,
prohibits the exercise of, or is conditioned
on the non-exercise of one or more of the
rights that are specifically granted under
this License. You may not convey a covered
work if you are a party to an arrangement
with a third party that is in the business of
distributing software, under which you make
payment to the third party based on the
extent of your activity of conveying the work,
and under which the third party grants, to any
of the parties who would receive the covered
work from you, a discriminatory patent license
(a) in connection with copies of the covered
work conveyed by you (or copies made
from those copies), or
(b) primarily for and in connection with specific
products or compilations that contain the
covered work, unless you entered into that
arrangement, or that patent license was
granted, prior to 28 March 2007.
Nothing in this License shall be construed
as excluding or limiting any implied license
or other defenses to infringement that may
otherwise be available to you under applicable
patent law.
12. No Surrender of Others' Freedom.
If conditions are imposed on you (whether
by court order, agreement or otherwise) that
contradict the conditions of this License, they
do not excuse you from the conditions of
this License. If you cannot convey a covered
work so as to satisfy simultaneously your
obligations under this License and any other
pertinent obligations, then as a consequence
you may not convey it at all. For example, if
you agree to terms that obligate you to collect
a royalty for further conveying from those
to whom you convey the Program, the only
way you could satisfy both those terms and
this License would be to refrain entirely from
conveying the Program.
13. Use with the GNU Affero General
Public License.
Notwithstanding any other provision of
this License, you have permission to link
or combine any covered work with a work
licensed under version 3 of the GNU Affero
General Public License into a single combined
work, and to convey the resulting work.
The terms of this License will continue to
apply to the part which is the covered work,
but the special requirements of the GNU
Affero General Public License, section 13,
concerning interaction through a network will
apply to the combination as such.
14. Revised Versions of this License.
The Free Software Foundation may publish
revised and/ or new versions of the GNU
General Public License from time to time.
Such new versions will be similar in spirit to
the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version
number. If the Program specifies that a certain
numbered version of the GNU General Public
License “or any later version” applies to it, you
have the option of following the terms and
conditions either of that numbered version
or of any later version published by the Free
Software Foundation. If the Program does
not specify a version number of the GNU
General Public License, you may choose any
version ever published by the Free Software
Foundation.
If the Program specifies that a proxy can
decide which future versions of the GNU
General Public License can be used, that
proxy's public statement of acceptance of a
version permanently authorizes you to choose
that version for the Program.
Later license versions may give you additional
or different permissions. However, no
additional obligations are imposed on any
author or copyright holder as a result of your
choosing to follow a later version.
15. Disclaimer of Warranty.
THERE IS NO WARRANTY FOR THE
PROGRAM, TO THE EXTENT PERMITTED
BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE
COPYRIGHT HOLDERS AND/OR OTHER
PARTIES PROVIDE THE PROGRAM
“AS IS” WITHOUT WARRANTY OF
ANY KIND, EITHER EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. THE ENTIRE RISK
AS TO THE QUALITY AND PERFORMANCE
OF THE PROGRAM IS WITH YOU. SHOULD
THE PROGRAM PROVE DEFECTIVE, YOU
ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.
16. Limitation of Liability.
IN NO EVENT UNLESS REQUIRED BY
APPLICABLE LAW OR AGREED TO IN
WRITING WILL ANY COPYRIGHT HOLDER,
OR ANY OTHER PARTY WHO MODIFIES
AND/OR CONVEYS THE PROGRAM
AS PERMITTED ABOVE, BE LIABLE TO
YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE
THE PROGRAM (INCLUDING BUT NOT
LIMITED TO LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES
SUSTAINED BY YOU OR THIRD PARTIES OR
A FAILURE OF THE PROGRAM TO OPERATE
WITH ANY OTHER PROGRAMS), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS
BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
17. Interpretation of Sections 15 and 16.
If the disclaimer of warranty and limitation of
liability provided above cannot be given local
legal effect according to their terms, reviewing
courts shall apply local law that most closely
approximates an absolute waiver of all civil
liability in connection with the Program,
unless a warranty or assumption of liability
accompanies a copy of the Program in return
for a fee.
END OF TERMS AND CONDITIONS
GNU LESSER GENERAL PUBLIC
LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software
Foundation, Inc. 51 Franklin Street, Fifth Floor,
Boston, MA 02110-1301
USA Everyone is permitted to copy and
distribute verbatim copies of this license
document, but changing it is not allowed.
[This is the first released version of the Lesser
GPL. It also counts as the successor of the
GNU Library Public License, version 2, hence
the version number 2.1.]
Preamble
The licenses for most software are designed
to take away your freedom to share and
change it. By contrast, the GNU General
Public Licenses are intended to guarantee
your freedom to share and change free
software to make sure the software is free
for all its users.
This license, the Lesser General Public
License, applies to some specially
designated software packages-typically
libraries-of the Free Software Foundation
and other authors who decide to use it.
You can use it too, but we suggest you first
think carefully about whether this license or
the ordinary General Public License is the
better strategy to use in any particular case,
based on the explanations below.
When we speak of free software, we are
referring to freedom of use, not price. Our
General Public Licenses are designed
to make sure that you have the freedom
to distribute copies of free software (and
charge for this service if you wish); that
you receive source code or can get it if you
want it; that you can change the software
and use pieces of it in new free programs;
and that you are informed that you can do
these things.
To protect your rights, we need to make
restrictions that forbid distributors to deny
you these rights or to ask you to surrender
these rights. These restrictions translate
to certain responsibilities for you if you
distribute copies of the library or if you
modify it.
For example, if you distribute copies of
the library, whether gratis or for a fee, you
must give the recipients all the rights that
we gave you. You must make sure that
they, too, receive or can get the source
code. If you link other code with the library,
you must provide complete object files to
the recipients, so that they can relink them
with the library after making changes to the
library and recompiling it. And you must
show them these terms so they know their
rights.
We protect your rights with a two-step
method: (1) we copyright the library, and (2)
we offer you this license, which gives you
legal permission to copy, distribute and/or
modify the library.
To protect each distributor, we want to
make it very clear that there is no warranty
for the free library. Also, if the library is
modified by someone else and passed
on, the recipients should know that what
they have is not the original version, so
that the original author’s reputation will
not be affected by problems that might be
introduced by others.
Finally, software patents pose a constant
threat to the existence of any free program.
We wish to make sure that a company
cannot effectively restrict the users of a
free program by obtaining a restrictive
license from a patent holder. Therefore, we
insist that any patent license obtained for
a version of the library must be consistent
with the full freedom of use specified in this
license.
Most GNU software, including some
libraries, is covered by the ordinary GNU
General Public License. This license, the
GNU Lesser General Public License,
applies to certain designated libraries, and
is quite different from the ordinary General
Public License. We use this license for
certain libraries in order to permit linking
those libraries into non-free programs.
When a program is linked with a library,
whether statically or using a shared library,
the combination of the two is legally
speaking a combined work, a derivative
of the original library. The ordinary General
Public License therefore permits such
linking only if the entire combination fits
its criteria of freedom. The Lesser General
Public License permits more lax criteria for
linking other code with the library.
We call this license the “Lesser” General
Public License because it does Less
to protect the user’s freedom than the
ordinary General Public License. It also
provides other free software developers
Less of an advantage over competing nonfree programs. These disadvantages are
the reason we use the ordinary General
Public License for many libraries. However,
the Lesser license provides advantages in
certain special circumstances.
For example, on rare occasions, there may
be a special need to encourage the widest
possible use of a certain library, so that it
becomes a de-facto standard. To achieve
this, non-free programs must be allowed to
use the library. A more frequent case is that
a free library does the same job as widely
used non-free libraries. In this case, there
is little to gain by limiting the free library to
free software only, so we use the Lesser
General Public License.
In other cases, permission to use a
particular library in non-free programs
enables a greater number of people to use
a large body of free software. For example,
permission to use the GNU C Library in
non-free programs enables many more
people to use the whole GNU operating
system, as well as its variant, the GNU/
Linux operating system.
Although the Lesser General Public License
is Less protective of the users’ freedom, it
does ensure that the user of a program that
is linked with the Library has the freedom
and the wherewithal to run that program
using a modified version of the Library.
The precise terms and conditions for
copying, distribution and modification
follow. Pay close attention to the difference
between a “work based on the library” and
a “work that uses the library”. The former
contains code derived from the library,
whereas the latter must be combined with
the library in order to run.
TERMS AND CONDITIONS FOR
COPYING, DISTRIBUTION AND
MODIFICATION
0. This License Agreement applies to any
software library or other program which
contains a notice placed by the copyright
holder or other authorized party saying
it may be distributed under the terms of
this Lesser General Public License (also
called “this License”). Each licensee is
addressed as “you”.
A “library” means a collection of software
functions and/ or data prepared so as to
be conveniently linked with application
programs (which use some of those
functions and data) to form executables.
The “Library”, below, refers to any such
software library or work which has been
distributed under these terms. A “work
based on the Library” means either the
Library or any derivative work under
copyright law: that is to say, a work
containing the Library or a portion of it,
either verbatim or with modifications and/
or translated straightforwardly into another
language. (Hereinafter, translation is
included without limitation in the term
“modification”.)
“Source code” for a work means the
preferred form of the work for making
modifications to it. For a library, complete
source code means all the source code for
all modules it contains, plus any associated
interface definition files, plus the scripts
used to control compilation and installation
of the library.
Activities other than copying, distribution
and modification are not covered by this
License; they are outside its scope. The act
of running a program using the Library is not
restricted, and output from such a program
is covered only if its contents constitute a
work based on the Library (independent of
the use of the Library in a tool for writing it).
Whether that is true depends on what the
Library does and what the program that
uses the Library does.
1. You may copy and distribute verbatim
copies of the Library’s complete source
code as you receive it, in any medium,
provided that you conspicuously and
appropriately publish on each copy
an appropriate copyright notice and
disclaimer of warranty; keep intact all
the notices that refer to this License and
to the absence of any warranty; and
distribute a copy of this License along
with the Library.
You may charge a fee for the physical act
of transferring a copy, and you may at
your option offer warranty protection in
exchange for a fee.
2. You may modify your copy or copies
of the Library or any portion of it, thus
forming a work based on the Library, and
copy and distribute such modifications or
work under the terms of Section 1 above,
provided that you also meet all of these
conditions:
a) The modified work must itself be a
software library. b) You must cause the files
modified to carry prominent notices stating
that you changed the files and the date of
any change. c) You must cause the whole
of the work to be licensed at no charge
to all third parties under the terms of this
License. d) If a facility in the modified Library
refers to a function or a table of data to be
supplied by an application program that
uses the facility, other than as an argument
passed when the facility is invoked, then
you must make a good faith effort to ensure
that, in the event an application does not
supply such function or table, the facility
still operates, and performs whatever part
of its purpose remains meaningful. (For
example, a function in a library to compute
square roots has a purpose that is entirely
well-defined independent of the application.
Therefore, Subsection 2d requires that any
application-supplied function or table used
by this function must be optional: if the
application does not supply it, the square
root function must still compute square
roots.) These requirements apply to the
modified work as a whole. If identifiable
sections of that work are not derived
from the Library, and can be reasonably
considered independent and separate
works in themselves, then this License, and
its terms, do not apply to those sections
when you distribute them as separate
works. But when you distribute the same
sections as part of a whole which is a work
based on the Library, the distribution of the
whole must be on the terms of this License,
whose permissions for other licensees
extend to the entire whole, and thus to each
and every part regardless of who wrote it.
Thus, it is not the intent of this section to
claim rights or contest your rights to work
written entirely by you; rather, the intent is to
exercise the right to control the distribution
of derivative or collective works based on
the Library.
In addition, mere aggregation of another
work not based on the Library with the
Library (or with a work based on the Library)
on a volume of a storage or distribution
medium does not bring the other work
under the scope of this License.
3. You may opt to apply the terms of the
ordinary GNU General Public License
instead of this License to a given copy
of the Library. To do this, you must alter
all the notices that refer to this License,
so that they refer to the ordinary GNU
General Public License, version 2, instead
of to this License. (If a newer version than
version 2 of the ordinary GNU General
Public License has appeared, then you
can specify that version instead if you
wish.) Do not make any other change in
these notices.
Once this change is made in a given copy,
it is irreversible for that copy, so the ordinary
GNU General Public License applies to all
subsequent copies and derivative works
made from that copy.
This option is useful when you wish to
copy part of the code of the Library into a
program that is not a library.
4. You may copy and distribute the
Library (or a portion or derivative of
it, under Section 2) in object code or
executable form under the terms of
Sections 1 and 2 above provided t hat
you accompany it with the complete
corresponding machine-readable source
code, which must be distributed under
the terms of Sections 1 and 2 above on
a medium customarily used for software
interchange.
If distribution of object code is made by
offering access to copy from a designated
place, then offering equivalent access to
copy the source code from the same place
satisfies the requirement to distribute the
source code, even though third parties are
not compelled to copy the source along
with the object code.
5. A program that contains no derivative
of any portion of the Library, but is
designed to work with the Library by
being compiled or linked with it, is called
a “work that uses the Library”. Such a
work, in isolation, is not a derivative work
of the Library, and therefore falls outside
the scope of this License.
However, linking a “work that uses the
Library” with the Library creates an
executable that is a derivative of the Library
(because it contains portions of the Library),
rather than a “work that uses the library”.
The executable is therefore covered by
this License. Section 6 states terms for
distribution of such executables.
When a “work that uses the Library” uses
material from a header file that is part of the
Library, the object code for the work may
be a derivative work of the Library even
though the source code is not. Whether this
is true is especially significant if the work
can be linked without the Library, or if the
work is itself a library. The threshold for this
to be true is not precisely defined by law.
If such an object file uses only numerical
parameters, data structure layouts
and accessors, and small macros and
small inline functions (ten lines or less in
length), then the use of the object file is
unrestricted, regardless of whether it is
legally a derivative work. (Executables
containing this object code plus portions of
the Library will still fall under Section 6.)
Otherwise, if the work is a derivative of the
Library, you may distribute the object code
for the work under the terms of Section 6.
Any executables containing that work also
fall under Section 6, whether or not they are
linked directly with the Library itself.
6. As an exception to the Sections above,
you may also combine or link a “work
that uses the Library” with the Library
to produce a work containing portions
of the Library, and distribute that work
under terms of your choice, provided
that the terms permit modification of the
work for the customer’s own use and
reverse engineering for debugging such
modifications.
You must give prominent notice with each
copy of the work that the Library is used
in it and that the Library and its use are
covered by this License. You must supply
a copy of this License. If the work during
execution displays copyright notices, you
must include the copyright notice for the
Library among them, as well as a reference
directing the user to the copy of this
License. Also, you must do one of these
things:
a) Accompany the work with the complete
corresponding machine-readable source
code for the Library including whatever
changes were used in the work (which
must be distributed under Sections 1
and 2 above); and, if the work is an
executable linked with the Library, with
the complete machine readable “work
that uses the Library”, as object code
and/or source code, so that the user
can modify the Library and then relink to
produce a modified executable containing
the modified Library. (It is understood
that the user who changes the contents
of definitions files in the Library will
not necessarily be able to recompile
the application to use the modified
definitions.)
b) Use a suitable shared library mechanism
for linking with the Library. A suitable
mechanism is one that
(1) uses at run time a copy of the library
already present on the user’s computer
system, rather than copying library
functions into the executable, and (2) will
operate properly with a modified version of
the library, if the user installs one, as long as
the modified version is interface-compatible
with the version that the work was made
with.
c) Accompany the work with a written
offer, valid for at least three years, to give
the same user the materials specified in
Subsection 6a, above, for a charge no
more than the cost of performing this
distribution.
d) If distribution of the work is made by
offering access to copy from a designated
place, offer equivalent access to copy the
above specified materials from the same
place.
e) Verify that the user has already received
a copy of these materials or that you have
already sent this user a copy.
For an executable, the required form of the
“work that uses the Library” must include
any data and utility programs needed
for reproducing the executable from it.
However, as a special exception, the
materials to be distributed need not include
anything that is normally distributed (in
either source or binary form) with the major
components (compiler, kernel, and so
on) of the operating system on which the
executable runs, unless that component
itself accompanies the executable.
It may happen that this requirement
contradicts the license restrictions of other
proprietary libraries that do not normally
accompany the operating system. Such
a contradiction means you cannot use
both them and the Library together in an
executable that you distribute.
7. You may place library facilities that are a
work based on the Library side-by-side in
a single library together with other library
facilities not covered by this License,
and distribute such a combined library,
provided that the separate distribution
of the work based on the Library and
of the other library facilities is otherwise
permitted, and provided that you do
these two things:
a) Accompany the combined library with
a copy of the same work based on the
Library, uncombined with any other library
facilities. This must be distributed under
the terms of the Sections above.
b) Give prominent notice with the combined
library of the fact that part of it is a work
based on the Library, and explaining
where to find the accompanying
uncombined form of the same work.
8. You may not copy, modify, sublicense,
link with, or distribute the Library except
as expressly provided under this License.
Any attempt otherwise to copy, modify,
sublicense, link with, or distribute the
Library is void, and will automatically
terminate your rights under this License.
However, parties who have received
copies, or rights, from you under this
License will not have their licenses
terminated so long as such parties remain
in full compliance.
9. You are not required to accept this
License, since you have not signed
it. However, nothing else grants you
permission to modify or distribute the
Library or its derivative works. These
actions are prohibited by law if you do
not accept this License. Therefore, by
modifying or distributing the Library (or
any work based on the Library), you
indicate your acceptance of this License
to do so, and all its terms and conditions
for copying, distributing or modifying the
Library or works based on it.
10. Each time you redistribute the Library
(or any work based on the Library),
the recipient automatically receives a
license from the original licensor to copy,
distribute, link with or modify the Library
subject to these terms and conditions.
You may not impose any further
restrictions on the recipients’
exercise of the rights granted herein.
You are not responsible for enforcing
compliance by third parties with this
License.
11. If, as a consequence of a court
judgment or allegation of patent
infringement or for any other reason (not
limited to patent issues), conditions are
imposed on you (whether by court order,
agreement or otherwise) that contradict
the conditions of this License, they do
not excuse you from the conditions of
this License. If you cannot distribute
so as to satisfy simultaneously your
obligations under this License and any
other pertinent obligations, then as a
consequence you may not distribute
the Library at all. For example, if a
patent license would not permit royalty
free redistribution of the Library by all
those who receive copies directly or
indirectly through you, then the only
way you could satisfy both it and this
License would be to refrain entirely from
distribution of the Library.
If any portion of this section is held invalid
or unenforceable under any particular
circumstance, the balance of the section
is intended to apply, and the section as
a whole is intended to apply in other
circumstances.
It is not the purpose of this section to
induce you to infringe any patents or other
property right claims or to contest validity of
any such claims; this section has the sole
purpose of protecting the integrity of the
free software distribution system which is
implemented by public license practices.
Many people have made generous
contributions to the wide range of software
distributed through that system in reliance
on consistent application of that system; it
is up to the author/donor to decide if he or
she is willing to distribute software through
any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly
clear what is believed to be a consequence
of the rest of this License.
12. If the distribution and/or use of the
Library is restricted in certain countries
either by patents or by copyrighted
interfaces, the original copyright
holder who places the Library under
this License may add an explicit
geographical distribution limitation
excluding those countries, so that
distribution is permitted only in or
among countries not thus excluded. In
such case, this License incorporates the
limitation as if written in the body of this
License.
13. The Free Software Foundation may
publish revised and/or new versions of the
Lesser General Public License from time
to time. Such new versions will be similar
in spirit to the present version, but may
differ in detail to address new problems or
concerns.
Each version is given a distinguishing
version number. If the Library specifies
a version number of this License which
applies to it and “any later version”, you
have the option of following the terms and
conditions either of that version or of any
later version published by the Free Software
Foundation. If the Library does not specify
a license version number, you may choose
any version ever published by the Free
Software Foundation.
14. If you wish to incorporate parts of the
Library into other free programs whose
distribution conditions are incompatible
with these, write to the author to ask
for permission. For software which
is copyrighted by the Free Software
Foundation, write to the Free Software
Foundation; we sometimes make
exceptions for this. Our decision will be
guided by the two goals of preserving
the free status of all derivatives of our
free software and of promoting the
sharing and reuse of software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED
FREE OF CHARGE, THERE IS NO
WARRANTY FOR THE LIBRARY,
TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING
THE COPYRIGHT HOLDERS AND/
OR OTHER PARTIES PROVIDE
THE LIBRARY “AS IS” WITHOUT
WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO
THE QUALITY AND PERFORMANCE OF
THE LIBRARY IS WITH YOU. SHOULD
THE LIBRARY PROVE DEFECTIVE,
YOU ASSUME THE COST OF ALL
NECESSARY SERVICING, REPAIR OR
CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY
APPLICABLE LAW OR AGREED TO
IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY
WHO MAY MODIFY AND/OR
REDISTRIBUTE THE LIBRARY AS
PERMITTED ABOVE, BE LIABLE TO
YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO
USE THE LIBRARY (INCLUDING BUT
NOT LIMITED TO LOSS OF DATA OR
DATA BEING RENDERED INACCURATE
OR LOSSES SUSTAINED BY YOU OR
THIRD PARTIES OR A FAILURE OF
THE LIBRARY TO OPERATE WITH ANY
OTHER SOFTWARE), EVEN IF SUCH
HOLDER OR OTHER PARTY HAS
BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your
New Libraries
If you develop a new library, and you want
it to be of the greatest possible use to
the public, we recommend making it free
software that everyone can redistribute
and change. You can do so by permitting
redistribution under these terms (or,
alternatively, under the terms of the ordinary
General Public License).
To apply these terms, attach the following
notices to the library. It is safest to attach
them to the start of each source file to
most effectively convey the exclusion of
warranty; and each file should have at least
the “copyright” line and a pointer to where
the full notice is found. one line to give the
library’s name and an idea of what it does.
Copyright (C) year name of author
This library is free software; you can
redistribute it and/ or modify it under
the terms of the GNU Lesser General
Public License as published by the Free
Software Foundation; either version 2.1 of
the License, or (at your option) any later
version.
This library is distributed in the hope
that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied
warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public
License for more details.
You should have received a copy of the
GNU Lesser General Public License along
with this library; if not, write to the Free
Software Foundation, Inc., 51 Franklin
Street, Fifth Floor, Boston, MA 021101301 USA Also add information on how to
contact you by electronic and paper mail.
You should also get your employer (if you
work as a programmer) or your school, if
any, to sign a “copyright disclaimer” for the
library, if necessary. Here is a sample; alter
the names:
Yoyodyne, Inc., hereby disclaims all
copyright interest in the library ‘Frob’ (a
library for tweaking knobs) written by James
Random Hacker.
signature of Ty Coon, 1 April 1990 Ty Coon,
President of Vice.
OpenSSL LICENSE
Copyright (c) 1998-2006 The OpenSSL
Project. All rights reserved. Redistribution
and use in source and binary forms, with
or without modification, are permitted
provided that the following conditions are
met:
1. Redistributions of source code must
retain the above copyright notice, this list
of conditions and the following disclaimer.
2. Redistributions in binary form must
reproduce the above copyright notice,
this list of conditions and the following
disclaimer in the documentation and/
or other materials provided with the
distribution.
3. All advertising materials mentioning
features or use of this software must
display the following acknowledgment:
“This product includes software
developed by the OpenSSL Project for
use in the OpenSSL Toolkit. (http://www.
openssl.org/)”
4. The names “OpenSSL Toolkit” and
“OpenSSL Project” must not be used to
endorse or promote products derived
from this software without prior written
permission. For written permission, please
contact openssl-core@openssl.org.
5. Products derived from this software may
not be called “OpenSSL” nor may
“OpenSSL” appear in their names without
prior written permission of the OpenSSL
Project.
6. Redistributions of any form
whatsoever must retain the following
acknowledgment: “This product includes
software developed by the OpenSSL
Project for use in the OpenSSL Toolkit
(http://www.openssl.org/)”
THIS SOFTWARE IS PROVIDED BY THE
OpenSSL PROJECT “AS IS” AND ANY
EXPRESSED OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE OpenSSL
PROJECT OR ITS CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT
OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE. This
product includes cryptographic software
written by Eric Young (eay@cryptsoft.com).
This product includes software written by
Tim Hudson(tjh@cryptsoft.com).
Original SSLeay License
Copyright (C) 1995-1998 Eric Young
(eay@cryptsoft. com) All rights reserved.
This package is an SSL implementation
written by Eric Young (eay@cryptsoft. com).
The implementation was written so as to
conform with Netscapes SSL. This library
is free for commercial and non-commercial
use as long as the following conditions are
aheared to. The following conditions apply
to all code found in this distribution, be it
the RC4, RSA, lhash, DES, etc., code; not
just the SSL code. The SSL documentation
included with this distribution is covered by
the same copyright terms except that the
holder is Tim Hudson (tjh@cryptsoft.com).
Copyright remains Eric Young’s, and as
such any Copyright notices in the code are
not to be removed. If this package is used
in a product, Eric Young should be given
attribution as the author of the parts of the
library used. This can be in the form of a
textual message at program startup or in
documentation (online or textual) provided
with the package. Redistribution and use
in source and binary forms, with or without
modification, are permitted provided that
the following conditions are met:
1. Redistributions of source code must
retain the copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must
reproduce the above copyright notice,
this list of conditions and the following
disclaimer in the documentation and/
or other materials provided with the
distribution.
3. All advertising materials mentioning
features or use of this software must
display the following acknowledgement:
“This product includes cryptographic
software written by Eric Young (eay@
cryptsoft.com)” The word ‘cryptographic’
can be left out if the rouines from the
library being used are not cryptographic
related :-).
4. If you include any Windows specific
code (or a derivative thereof) from the
apps directory (application code) you
must include an acknowledgement: “This
product includes software written by Tim
Hudson (tjh@ cryptsoft.com)”
THIS SOFTWARE IS PROVIDED BY ERIC
YOUNG ‘‘AS IS AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE AUTHOR OR
CONTRIBUTORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any
publically available version or derivative of
this code cannot be changed. i.e. this code
cannot simply be copied and put under
another distribution licence [including the
GNU Public Licence.
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
Samsung Techwin cares for the environment at all product manufacturing stages, and is
taking measures to provide customers with more environmentally friendly products.
The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly
products, and indicates that the product satisfies the EU RoHS Directive.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its
electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other
household waste at the end of their working life. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, please separate these items from other types
of waste and recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take these items for
environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product and its electronic accessories should not be mixed with other
commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be
disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg,
Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive
2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the
environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste
and recycle them through your local, free battery return system.
SALES NETWORK
SAMSUNG TECHWIN CO., LTD.
Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400
TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745
SAMSUNG TECHWIN AMERICA Inc.
100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660
Toll Free : +1-877-213-1222 Direct : +1-201-325-6920
Fax : +1-201-373-0124
www.samsungcctvusa.com
www.samsungtechwin.com
www.samsungsecurity.com
www.samsungipolis.com
SAMSUNG TECHWIN EUROPE LTD.
Samsung House, 1000 Hillswood Drive, Hillswood Business
Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS
TEL : +44-1932-45-5300 FAX : +44-1932-45-5325
Download PDF

advertising