Shaking Incubator BT220 - Yamato Scientific Co.,Ltd.

Shaking Incubator BT220 - Yamato Scientific Co.,Ltd.
1/2
Shaking Incubator
Pump stirring type/reciprocating horizontal shaking
BT220
Temp. distribution accuracy
Shaking Stroke
Number of shaking
+/-0.1 deg.C (at 40deg.C)
20 mm
20 to 160 times /min
Desktop type requiring less space and easy to use
Compact design and easy-to-use shaking incubator water tank.
• The number of shakes can be adjusted at any
number in the range from 20 to 160 times /min
using a knob.
• The product is equipped with a shaking
ON/OFF switch and can be used as an incubator
water tank without shaking.
• Temperature may be set digitally with the
up/down key. In addition, high precision
temperature control as well as the shaking
function in the bath with a pump allows higher
temperature distribution accuracy.
• This product is compact but yet holds up to 72
test tubes of 16.5 diameter or three 300 mL
conical flasks.
• The product has an improved safety which is
equipped with dual overheat preventive device
and no-liquid heating preventive device and an
over current electric leakage breaker.
Control panel
Shaking rack
Yamato Scientific Co., Ltd.
http://www.yamato-scientific.com
2/2
Specifications
Product code
221135
Model
BT220
Performance
Operating temp. range
Room temp.+5 to 80 deg.C
Temp. adjustment
accuracy
+/-0.05 deg.C (at 40 deg.C)
Temp. distribution
accuracy
+/-0.1 deg.C (at 40 deg.C)
Temp. rising time
Approx. 40 min (from 23deg.C to 80deg.C)
Configuration
Shaker motor
Shaking rpm setting
Shaking stroke
Number of containers
stored
Controller
Geared motor: 25W
Analogue setting/scale display No-step speed control: 30 to 160/min
20 mm
Test tube: 16.5 dia. x 72
Flask: 100 mL x 5, 200 mL x 4, 300 mL x 3, 500 mL x 1
PID digital setting/display
Fixed operation, timer operation (auto stop, quick auto stop, auto start)
Stirrer
Jet stirring induction motor
Heater
1.2 kW Copper pipe nickel plated
Function
Safety functions
Automatic heating, sensor disconnection, over current electric leakage breaker, no-liquid
heating prevention float switch
Standards
Tank internal
dimensions
224 x 328 x 200 mm (W x D x H) 14.7L
Shaking rack
dimensions
200 x 186 x 175 mm (W x D x H)
External material
dimensions
280 x 459 x 450 mm (W x D x H)
Interior material
Stainless steel
Power source
Weight
AC100V 13A (15A)
Approx. 19 kg
Accessory
Accessory
Shaking rack
Yamato Scientific Co., Ltd.
http://www.yamato-scientific.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising