Man & Machine B Cool Specification
Man & Machine B Cool is a water-resistant keyboard that offers an economical solution for those seeking a reliable and easy-to-clean input device. Designed with low-profile keys, it provides an exceptional touch and feel while taking up minimal space. The B Cool can be effortlessly cleaned by wiping, brushing, spraying, rinsing, or submerging, making it ideal for environments that demand frequent sanitization. Compatible with USB ports, it requires no software installation and is backed by a one-year limited warranty.
Advertisement
Advertisement
B C o o l l l K e y b o a r d
The B Cool washable keyboard is Man & Machine’s answer to people who want a water-resistant keyboard at an economical price. The B Cool is a less expensive alternative to our truly waterproof models. The B Cool has low-profile keys which makes the touch and feel of the keycaps exceptional. It takes up little space, easy to clean, and comes with all the passion, commitment and support that you expect with any of our
“cool” products.
Weight:
430 g (0.9 lb.)
System requirements:
USB interface
Dimensions:
377.0mm x 123.0 mm x 27.0 mm
(14.84” x 4.84” x 1.06”)
Cable length:
1.44 m (4.75’)
Voltage:
5 Volt
Number of keys:
108 = US Layout with
Windows™
Warranty period:
One-year limited warranty
Specifications subject to change without notice
Installing Your B Cool Keyboard
USB: Attach the keyboard cable to a USB computer port. (You do not have to turn off your computer. There is no software to install.)
You can email us at: [email protected] or call us at: (301) 341-4900
In Europe, contact +31-23-5450185 www.man-machine.com
Copyright Man & Machine, Inc. 2010
Cleaning Instructions for B Cool Keyboard:
1 .
Lock the keyboard by pressing the Lock key (above the Num
2 .
Lock key) for about three seconds.
Clean the surface of the product by wiping, brushing or spraying.
Use only rags, sponges or soft bristle brushes.
3 .
DO NOT place the USB connector into the fluid.
Either wipe with dry cloth or allow to air dry.
4 .
Keyboard can also be rinsed or submersed. After cleaning, drain, and turn upside down on dry towel and allow to air dry.
5 .
After you finished cleaning press the Lock key for three seconds to unlock the keyboard.
Disinfectants recommended by Man & Machine, Inc.:
•
Chlorine based (max 10% solution) – Chlorox, Novalsan, etc.
•
Formaldehyde based - Formaldehyde Solution 37%, Vinco
Formaldegen, etc.
• Glutaraldehyde based – Aldacide 200, Lysofume, Wavicide, etc.
•
Phenol based – Lysol I.C., Beaucoup, Magna Clean, Tek-Trol, etc.
•
Alcohol based – Cavicide, Isopropyl Alcohol, Medicide, etc.
•
Oxidizing – Hydrogen Peroxide 3% Solution, Lifegard Series, etc.
•
Quaternary Ammonium – Roccal-D, Bacto-Sep, Parvosol, etc.
•
Soap and water
DO NOT USE:
• Petroleum based cleaning fluids, such as Gasoline
•
Acetone
•
Over 10% bleach solutions
•
Temperature or pressure sterilization
• Buffing pads or scrubbing pads
THESE INSTRUCTIONS AND RECOMMENDATIONS HAVE BEEN PREPARED TO ADVISE
THE PROPER METHODS FOR CLEANING YOUR PRODUCT. MAN & MACHINE, INC.
OR THE LOCAL DISTRIBUTOR CANNOT ASSUME ANY RESPONSIBILITY FOR THE
APPLICATION OF THEM. IF THERE ARE ANY QUESTIONS, PLEASE CONTACT PLACE
OF PURCHASE OR MMI PRIOR TO CLEANING.
MAN & MACHINE DOES NOT CONSIDER THE B COOL KEYBOARD TO BE A MEDICAL
KEYBOARD FOR INFECTION CONTROL PURPOSES DUE TO THE INABILITY TO
MECHANICALLY CLEAN ALL SURFACES AND AREAS ON THE KEYBOARD.

Public link updated
The public link to your chat has been updated.
Advertisement