user manual - Squarespace

user manual - Squarespace
U S E R M A NU A L
THE ULTIMATE POWER TOOL
Congratulations on your purchase of Goliath – the biggest, baddest Fuel
Tank power supply we’ve ever built.
Able to power 7 pedals simultaneously, Goliath will keep any board this
side of Spinal Tap powered up and sounding great – no matter what kind
of pedals you use.
To give you the versatility you demand, Goliath provides not just 5 isolated traditional outlets – switchable between 9 and 12 volts and each
delivering 450 mA of power. It also includes an 18VDC outlet (250mA)
and a 12VAC outlet (450mA). Add in T-Rex reliability and great ease of
use, and you get the best 3000 mA of clean, quiet power money can buy.
Turn the page for a few tips on how to get the very most out of your
Goliath.
SELECT, PLUG, AND PLAY
Getting started
Goliath gives you 7 separate outlets for plugging your pedals into. Here’s
how they work:
•
Outlets 1–5 can all be used to power either 9V or 12V DC pedals. For
each outlet, just use the VOLTAGE SELECTOR switches to choose the
voltage you need, plug in your pedal and go!
•
Outlet 6 is a non-switchable 18V DC outlet for your 18V pedals.
•
Outlet 7 is a 12V AC outlet for pedals that require AC power.
TECHNICAL SPECIFICATIONS
Dimensions (W x H x D)
Weight (excl. packaging)
Power supply
180x92x48 mm / 7,1x3,6x1,9 inch
1,4 kg/ 49,4 oz
Switchable 115V or 230V mains
Fuse
Connections
T315mA / 250V
5 x 9 or 12VDC 450mA
1 x 18VDC 250mA
1 x 12VAC 450mA
All the cables you need:
1 x Mains power cable
1 x Black Link DC cable with five 2,1mm – 2,1mm connectors
1 x Red 50cm AC cable with 2,1mm – 2,5mm connectors for use on the 12V AC outlet.
1 x Blue 50cm AC cable with 2,5mm – 2,5mm connectors for use on the 12V AC outlet.
1 x black 50cm DC cable with 2,1mm connector – 3,5mm mini-jack connector
All the cables you need
Your new Goliath comes with a full set of cables to help you keep your
board clutter-free. Once you’ve selected your voltage options, just plug
in and play!
1 x Orange 10cm Polarity inverter cable with 2,1mm connector – 2,1mm female connector.
1 x Green Current doubler cable. 2 x 2,1mm connectors – 2,1mm connector
2 x Black 20cm DC cables with 2,1mm – 2,1mm connector.
4 x Black 50cm DC cables with 2,1mm – 2,1mm connector.
2 x Black 75cm DC cables with 2,1mm – 2,1mm connector.
MOUNTING BRACKET INCLUDED:
The Goliath comes with a mounting bracket that allows you to secure the
Goliath to your pedalboard in an easy and effective way.
Using the four SHORT screws:
In case you are mounting the Goliath to a wooden board, you can attach the
bracket directly to the Goliath and use the four small holes in the bracket to
attach the bracket to the board.
(The screws for the four small holes are not included).
Using the four LONG screws:
In case you are mounting the Goliath to a T-Rex ToneTrunk (or similar) board,
place the Goliath underneath the board and the bracket on top of the board.
Use the LONG screws.
(Please be aware that placing sensitive pedals directly on top of the Goliath
can result in a hum in your signal).
Caution:
If the four LONG screws are used, DO NOT attach the bracket directly to the
Goliath! Make sure that there is some distance between the bracket and the
Goliath OR use the four SHORT screws.
The LONG screws can damage the internal components, if they are screwed
in too far. Doing so will void the warrenty.
POWER SAMPLE 1
POWER SAMPLE 2
9V DC
9V DC
9V DC
9V DC
9V DC
12V DC
18V DC
9V DC
9V AC
9V DC
USE POLARITY
INVERTER CABLE
9V DC
Guitar Effects Technology
feedback
mod level
color
analog
POWER
mix level
DL4 Delay Modeler
2290
preset
mod style
on/off
tc electronic
TC Electronic Flash Back x4
t.c. electronic
Strymon TimeLine
type
OUTPUT
manual
PROGRAMMABLE DELAY & 14 SECOND LOOP SAMPLER
REVERSE
WIDTH
SPEED
REGEN.
subdiv
flanger
tap tempo
ND-1
MANUAL
INPUT
delay
NOVA DELAY
PROGRAMMABLE DIGITAL DELAY
TC Electronic NovaDelay
The above mentioned pedals are all registered trademarks.
Eventide Timefactor
Line 6 DL-4
T-Rex Sweeper 2
T-Rex Hobo Drive
T-Rex Mean Machine
T-Rex Møller 2
The above mentioned pedals are all registered trademarks.
T-Rex RoomMate Jr.
MXR Flanger
T-REX WARRANTY CONDITIONS
ABOUT T-REX
T-Rex offers a 2-year warranty on all our products. In the unlikely event of a
malfunction, please contact our technical support at [email protected]
com before sending us the product for repair. When the product has been
sent to us at sender’s cost, we will repair or replace your product and send
it back to you - free of charge and usually within 4 weeks (shipping not
included). The product needs to be accompanied by a copy of your receipt,
serial number, return address, phone number, e-mail address and a brief
explanation of the problem. Please note that we cannot replace a product
until we have received it here in Denmark.
Based in Vejle, Denmark, T-Rex Engineering makes classic and signature effects pedals for the world’s best musicians. Our approach
blends hi-tech innovation with old-world craftsmanship – always
in the service of killer tone.
The warranty is lost if the product has been damaged by alteration, misuse, accident, or neglect; or if the product has been repaired or serviced by
persons not authorized by T-Rex. Read more about warranty conditions at
www.t-rex-effects.com/service
EU REGULATIONS • ENVIRONMENT PROTECTION
T-Rex accepts and follows the regulations and directives issued
by the EU. We find these environment protecting regulations very
good, and we are happy to follow them.
RoHS
REACh
ISSUED IN VEJLE, 2013
Lars Dahl-Jørgensen
Founder
Sebastian Jensen
Founder
T-Rex Engineering ApS
www.t-rex-effects.com
1st edition 2013
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement