PRODUCT SPECIFICATION D2300 SERIES RS-485 DROP AND REPEAT DATA TRANSCEIVER (2-WIRE) FEATURES • Meets EIA RS-485 Specifications • Meets NEMA TS-1/TS-2 & Caltrans Specifications (Temperature/Humidity, Shock/Vibration, and Voltage Transient Protection) • Transparent to Data Encoding / Compatible with Major Data Protocols • No In-field Electrical or Optical Adjustments Required DESCRIPTION • Automatic Resettable Solid-State Current Limiters The IFS D2300 series data transceivers provide drop and repeat transmission of half-duplex (2-wire) EIA RS-485 data signals over one or two optical fibers. The transceivers feature optical "drop & repeat" capability that allows the user to easily configure the network operation. The transceivers are transparent to data encoding allowing for broad-range compatibility. The D2300 series transceivers can be used as line-terminating devices with these modules. Models within this series are available for use with multimode or single mode optical fiber. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. Each transceiver incorporates power and transmit/receive data status indicating LED’s for monitoring proper system operation. The modules are available in either stand-alone or rack mount versions. • Drop and Repeat Network Architecture • Power, Transmit and Receive Data Status LED Indicators • Data rates up to 200 kbps NRZ • Hot-Swappable Rack Modules • 2-Wire (Half-Duplex) Available at: www. • True Tri-State Output • Data Re-clocking APPLICATION EXAMPLES • Access Control Systems • Building Automation and Environmental Control Systems • Computer/Data Equipment • Fire & Alarm Systems • Traffic Signal Control Equipment D • Distances up to 25 Miles (40 km) • Comprehensive Lifetime Warranty .com • A & E Specifications, (CSI) • AutoCAD Drawings • Operation Manuals • Technical Bulletins ORDERING INFORMATION OPTICAL PWR BUDGET MAX. DISTANCE* DESCRIPTION FIBERS REQUIRED D2300 RS-485, 2 Wire Repeater (850 nm) 2 In/2 Out 13 dB 2 miles (3.5 km) D2320 RS-485, 2 Wire Repeater (1310 nm) 2 In/2 Out 13 dB 8 miles (13 km) SINGLEMODE D2325 9/125µm RS-485, 2 Wire Repeater (1310 nm) 2 In/2 Out 14 dB 25 miles (40 km) PART NUMBER MULTIMODE 62.5/125µm** ACCESSORIES♦ OPTIONS PS-12VDC 12 Volt DC Plug-in Power Supply (Included) PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC AC Input. (Included if specified at time of order) Add ‘-R3’ to Model Number for R3 Rack Mount (Requires R3 Rack purchased separately) Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory) * Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget. ♦ All accessories are third party manufactured. International Fiber Systems, Incorporated ■ DESIGN CENTER (888) 999-9IFS or (203) 426-1180 FAX (203) 426-3326 ■ [email protected] Europe, Middle East, Africa TEL +44(0) 1732 522 777 ■ Asia Pacific TEL +65 6235 2661 ■ Latin America TEL (512) 477-8787 D2300 SERIES TECHNICAL SPECIFICATION RS-485 DROP AND REPEAT DATA TRANSCEIVER (2-WIRE) SPECIFICATIONS ELECTRICAL & MECHANICAL DATA Power: Surface Mount: 12 VDC @250 mA From Rack Automatic Resettable Solid-State Current Data Interface: Data Rate: RS-485 (2 wire) DC - 200 kbps Rack: Current Protection: Total Network Pulse Distortion: <1µsec Circuit Board: Size (in./ cm.) (LxWxH): Surface Mount: Rack Mount: Shipping Weight: WAVELENGTH D2300: All Others: 850 nm, Multimode 1310 nm, Multimode or Singlemode NUMBER OF FIBERS 2 In/2 Out 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm. 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm. < 2 lbs./0.9 kg ENVIRONMENTAL CONNECTORS Optical: Data and Power: Limiters Meets IPC Standard ST Terminal Plug with screw clamps MTBF: Operating Temp: >100,000 hours -40° C to +74° C Storage Temp: Relative Humidity: -40° C to +85° C 0% to 95% (non-condensing)† † May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating. AGENCY COMPLIANCE Federal Supply Schedule MADE IN THE USA Contract No. GS-07F-0049M Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J OPTICAL POWER BUDGET FIBER WAVELENGTH MODEL Multimode 62.5/125µm** 850 nm TRANSCEIVER OUTPUT PWR SENSITIVITY OPTICAL PWR BUDGET MAX. DISTANCE* 2.5 miles (4 km) D2300 1 µw (-30 dBm) 20 µw (-17 dBm) 13 dB D2320 8 miles (13 km) 1310 nm Single-mode 9/125µm 25 µw (-16 dBm) D2325 14 dB 25 miles (40 km) * Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget. SYSTEM DESIGN up to 2.5 miles (4 km) D1300 ifs 203.426.1180 International Fiber Systems Incorporated D2300 D2300 ifs International ifs Fiber Systems Incorporated 203.426.1180 International Fiber Systems Incorporated 203.426.1180 Control Data Control Data 2 Fibers 62.5/125µm MM D1300 ifs International Fiber Systems Incorporated 203.426.1180 Control Data Control Data Host TEL (203)426-1180 ■ FAX (203)426-3326 ■ www.ifs.com ■ [email protected] 16 Commerce Road ■ Newtown, CT 06470 Due to our continued effort to advance technology, product specifications are subject to change without notice. 07/01/04
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021