XB12_A0U_ENG_HK_MFL40246569 XB12 XB12-A0U/D0U/X0U XBS12V English Mini Home Theater Read the manual carefully before using the unit. P/NO: MFL40246569 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings should be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction have been adhered to. CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible. IMPORTANT SAFETY NOTICE The cord grip for the plug fitted to this product is built into the existing power cord as supplied. If, for any reason you need to shorten the cord, DO NOT RE-USE THE PLUG. A new plug must be used to ensure your continued safety by securing the plug to the power cord in accordance with Plug & Socket Regulations 1994. CAUTION: This Product employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference, should the unit require maintenance, contact an authorized service locationsee service procedure. Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The apparatus shall not be exposed to water, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED 2 POWER SAVE MODE You can set up the unit into an economic power save mode. In power-on status, press and hold 1/[(POWER) button for about 3 seconds. - Nothing is displayed in the display window when the unit goes into the power save mode. To cancel power save mode, press 1/[ (POWER). Introduction About the symbols for instructions TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . . 4 Speaker system connection. . . . . . . . . . . . . . . . . . . . 4 Caution Indicates hazards likely to cause harm to the unit itself or other material damage. Note T ip Indicates special operating features of this unit. Indicates tips and hints to make the task easier Operation Operation using the front Panel . . . . . . . . . . . . . . . . . 5 Operation using the Remote Control. . . . . . . . . . . . 6-8 Additional features. . . . . . . . . . . . . . . . . . . . . . . . . . . 8 ENGLISH Installation Playable Discs DVD (8 cm / 12 cm disc) Setup Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10 Playing an Audio CD or MP3/WMA/JPEG/DivX file Playing an Audio CD or MP3/WMA file . . . . . . . . . . . . 10 Programmed Playback . . . . . . . . . . . . . . . . . . . . . . 10 Viewing a JPEG file . . . . . . . . . . . . . . . . . . . . . . . . . 11 Playing a DivX Movie file . . . . . . . . . . . . . . . . . . . . 11 Timer function Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Timer Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 TUNER Presetting radio stations . . . . . . . . . . . . . . . . . . . . . 12 Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . 13 RDS Operation -Optional . . . . . . . . . . . . . . . 13 Reference Language Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Specifications About the symbol display “ ” may appear on the TV screen during operation. This icon means the function explained in this owner’s manual is not available on that specific DVD video disc. Audio CD (8 cm / 12 cm disc) In addition, this unit can play a DVD±R, DVD±RW, and CD-R or CD-RW that contains audio titles, MP3, WMA, JPEG or DivX files. Note : • Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit. • Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. • Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). It may result in malfunctions. Regional Code This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labeled as the same as the rear of the unit or “ALL”. Note on Regional Codes • Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must match your unit’s regional code or the disc cannot play. • If you try to play a DVD with a different regional code from your player, the message “Check Regional Code” appears on the TV screen. About the disc symbols for instructions A section of which title has one of the following symbols is applicable only to the disc represented by the symbol. DVD DVD ACD Audio CDs MP3 MP3 file WMA WMA file JPEG JPEG file DivX DivX file 3 Installation For AM(MW) reception,connect the loop antenna (aerial) to the terminal marked AM (Supplied)- OPTIONAL FM wire antenna (supplied) Rear of TV VIDEO INPUT OPTIONAL TV Connection Note : Video connection • To prevent noise pickup, keep the AM loop(optional) antenna away from the unit and other component. Connect the VIDEO OUT jack from the unit to the VIDEO IN jack on the TV using the video cable supplied (V). T ip • Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections. • Be sure to fully extend the FM wire antenna. • After connecting the FM wire antenna, keep it as horizontal as possible. Speaker System Connection Connect the speaker wires to the speaker terminals. Caution Note : • Make sure the unit is connected directly to the TV. Select the correct AV input on your TV. • Be sure to match the speaker wires to the appropriate terminal on the components, + to + and – to –. If the cables are reversed, the sound will be distorted and will lack bass. • Do not connect your unit to TV via your VCR. The DVD image could be distorted by the copy protection system. Antenna (Aerial) Connection Connect the supplied FM/AM(optional) antennas to listen to the radio. • Connect the AM loop antenna to the AM antenna connector. (optional) • Connect the FM wire antenna to the FM antenna connector. 4 • If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers. Operation Operation using the front Panel 1.Connect the PORTABLE IN jack on this device to a headphone jack on another portable one by using a cable. ENGLISH 2.Press FUNC. on the front panel repeatedly or PORTABLE(on the remote control) button. 3.Start playing the connected portable device. 4.Adjust the volume by using VOLUME. 5. USB port USB Function You can enjoy the media files such as tunes (MP3/WMA/PHOTO/VIDEO file) saved in an MP3 player or USB memory by connecting the storage device to the USB port of this unit. Compatible Devices 1. Devices which require additional program installation when you have connected it to a computer, are not supported. 2. MP3 Player : Flash type MP3 player. The MP3 player requiring installation of a driver is not supported. 3. USB Flash Drive : Devices that support USB2.0 or USB1.1. Portable Device Portable in cable To Remove the USB from the unit USB Memory, MP3 Player (or Memory Card Reader, etc.) 1. DISPLAY WINDOW 2. 1/[ POWER FUNC. (function select)button (DVD/CD,PORTABLE,FM, AM (optional),USB ) 3. • STOP /MO./ ST. SET(x x) B/ ) • PLAY /PAUSE (B • TUNING (-) - Tuner . ) ALL CD SKIP/ SCAN (. • TUNING (+)- Tuner > ) ALL CD SKIP/ SCAN (> • Volume control knob 4. PORTABLE IN Jack Using PORTABLE device When you connect a portable music playing device to the PORTABLE IN jack on this device by using a ( 3.5mm)mini stereo cable (not supplied), you can here the sound being outputted from the portable device through the speaker. 1. Choose the other functions except USB function in order to remove the USB. 2. Remove the USB from the unit. • Do not extract the USB device in operating. • A back up demands to prevent a data damage. • If you use a USB extension cable or USB hub, the USB device might not be recognized. • A device using NTFS file system is not supported. (Only FAT (16/32) file system is supported.) • The USB function of this unit does not support all USB devices. • Digital camera and mobile phone are not supported. • This unit is not supported when the total number of files is 1000 or more. • If the drive of USB device is two or more, a drive folder is displayed on the screen. If you want to move to the previous menu after you select a folder, press RETURN. 6. • TIMER • CLOCK 7. DISC door 5 Operation using the Remote Control • XDSS plus 1 16 2 XDSS (Extreme Dynamic Sound System) Press XDSS plus to reinforce treble, bass and the surround effect. The “XDSS” or “NORMAL” indicator lights. : XDSS ↔ NORMAL DVD/DivX/ACD MP3/WMA : XDSS → MP3 -- OPT 3 → NORMAL → XDSS 5. • SOUND MODE You can enjoy surround sound simply by selecting one of the pre-programmed sound fields according to the program you want to listen to (2 ch. sound only). 4 Press SOUND MODE repeatedly. BYPASS → STUDIO → CLUB → HALL → THEATER 1 → CHURCH → BYPASS... 5 6 15 Note: Initial sound mode is BYPASS. • AUDIO AUDIO language: During playback, press AUDIO repeatedly to hear a different audio language or audio track. DVD DivX 7 14 13 8 9 AUDIO channel: Press AUDIO repeatedly during playback to hear a different audio channel (Stereo., Left or Right). • SUBTITLE During playback, press SUBTITLE repeatedly to select a desired subtitle language. DVD DivX 12 • RETURN ( ) Removes the setup menu. 10 6. SETUP 11 7. • b/B/v/V (left/right/up/down) RDS PTY (Selects an option in the menu) v/V V) • PRESET -/+ (v 1. POWER( 1) 2. FUNCTION SELECT (TUNER/BAND,DVD, PORTABLE, USB) 3. NUMERIC buttons (0- 9) Selects a service, program number directly or selects numbered options in a menu. 4. • EQ (EQUALIZER Effect) You can choose 4 fixed sound impressions Each time you press the button the setting changes in the display window as shown below. NORMAL → ROCK → POP → CLASSIC → NORMAL... 6 (Selects program of radio) v/V V) repeatedly to select the Press PRESET -/+ (v preset station you want. Each time you press the button, the unit tunes in one preset station at a time. Preset radio stations in the unit’s memory first. (see “Presetting radio stations”on the page 12) • TUN. -/+ (b/B) For manual tuning, press TUN. -/+(b/B) repeatedly For automatic tuning, press and hold TUN. -/+(b/B) for about two seconds. • SELECT/ ENTER Acknowledges the menu selection. The disc menu appears on the screen. 9. • PROG./MEMO. Accesses or removes Program menu. Enter a radio station’s frequency into the tuner. • REPEAT During playback, press REPEAT repeatedly to select a desired repeat mode. DVD Video discs: Chapter/Title/Off Audio CD, DivX/MP3/WMA discs: Track/All/Off • REPEAT A-B DVD During playback, press REPEAT A-B to select a point A and a point B and repeats a sequence from point A (Starting point) to point B (End point). Press REPEAT A-B to exit. Note : The A-B repeat function is available only in the current title. 10.• STOP/MO./ST.(x) For your reference • If an FM program is noisy; Press MO./ST.(x x) that “STEREO ” disappears in the display window. There will be no STEREO effect, but the reception will be improved. Press MO./ST.(x x) again to restore the stereo effect. • To improve reception; Reposition the supplied antennas. • PAUSE/ STEP() During playback, press PAUSE/ STEP() to pause playback. ALL PressPAUSE/ STEP () repeatedly to play Frame-by-Frame. DVD DivX B) - To Play disc and file • PLAY (B 11.• CLEAR Removes a track number on the program menu or a mark on the MARKER SEARCH menu. • ZOOM During playback or in the pause mode, press ZOOM to enlarge the video image (3 steps). You can move through the zoomed picture using b /B /v /V buttons. Note : Zoom may not work on some DVDs. • MARKER - SEARCH To enter a Marker You can start playback from up to nine memorized points. To enter a marker, press MARKER at the desired point on the disc. The Marker icon appears on the TV screen briefly. Repeat to enter up to nine markers. To Recall or Clear a Marked Scene 1.During disc playback, press SEARCH. The marker search menu appears on the screen. 2.Within 10 seconds, press b / B to select a marker number that you want to recall or clear. 3.Press SELECT/ENTER and playback starts from the marked scene. Or press CLEAR and the marker number is erased from the list. 4.You can play any marker by inputting its number on the marker search menu. • SLEEP You can set the unit to turn off automatically at a specified time . 1. Press SLEEP to set the desired sleep time. The SLEEP indicator and the sleep time appears in the display window. 2. Each time you press SLEEP the setting changes in the following order. →80→ →70 → 60→ → SLEEP180 →150 → 120 →90→ 50 → 40 → 30 → 20 →10 → OFF (No display) →SLEEP 180... Note : You can check the remaining time before the unit turns off. Press SLEEP. The remaining time appears in the display window. • RDS,PTY - OPTIONAL Views the various displays of the RDS options. 12.VOLUME -/+ Adjusts speaker volume. . / >) 13.• SKIP (. During playback, press SKIP (. or >) to go to the next chapter/track or to return to the beginning of the current chapter/track. Press SKIP . twice briefly to step back to the previous chapter/track. m / M) • SCAN (m During playback, press SCAN (m or M) repeatedly to select the required scan speed. DVD : 5 steps (BB, BBB, BBBB, BBBBB, BBBBBB), bb, bbb, bbbb, bbbbb, bbbbbb) (b WMA/MP3, Audio CD m (X2, X4, X8) or BB (X2, X4, X8) • SLOW In the pause mode, press t or T to select required speed. DVD : t (1/2, 1/4, 1/8, 1/16) or T (1/2, 1/4, 1/8, 1/16) 14.TITLE (Use the TITLE button to display the title screen included on DVD video discs.) 7 ENGLISH 8. MENU 15.DISPLAY Last Scene Memory DVD You can display various information about the disc loaded on-screen. 1.Press DISPLAY to show various information about the disc loaded on-screen. The displayed items differ depending on the disc type or playing status. This unit memorizes the last scene from the last disc that is viewed. The last scene remains in the memory even if you remove the disc from the unit or switch off the unit. If you load a disc that has the scene memorized, the scene is automatically recalled. 2.You can select an item by pressing v / V and change or select the setting by pressing b / B. Title (Track) –Current title (or track) number/total number of titles (or tracks). Chapter –Current chapter number/ total number of chapters. Time – Elapsed playing time. Audio – Selected audio language or channel. Subtitle – Selected subtitle. Note : This unit does not memorize the scene of a disc if you switch off the unit before commencing to play the disc. 1.5 speed playback DVD MP3 WMA 1. Press PLAY during the normal playback. The screen will appear at 1.5 speed with sound . Angle – Selected angle/ total number of angles. 2. To return to the normal PLAY, press PLAY. Sound – Selected sound mode. System Select Note : If a button is not pressed for a few seconds, the onscreen display disappears. 16. MUTE( ) Press MUTE to mute your unit. You can mute your unit in order, for example, to answer the telephone. Additional features Time Search DVD DivX ACD You can enjoy a music and movie at a faster speed. The 1.5 speed allows you to watch the pictures and listen to the sound quicker than playing at a normal speed on the disc. You must select an appropriate system mode for your TV system. If NO DISC appears in the display window, press and hold PAUSE/STEP () on remote control or B/[ ] ) on the front panel for more than PLAY /PAUSE (B 5 seconds to be able to select a system (PAL, NTSC or AUTO). - When the selected system is not compatible with the system of your TV, normal colour picture may not be displayed. NTSC: Select when the unit is connected with NTSC-TV. To start playing at any chosen time on the disc: PAL: 1. Press DISPLAY during playback. AUTO: Select when the unit is connected with Multi system TV. 2. Press v / V to select the time clock icon and “--:--:--” appears. 3. Input the required start time in hours, minutes, and seconds from left to right. If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then input the correct numbers. 4. Press SELECT/ENTER to confirm. Playback starts from the selected time. Screen Saver The screen saver appears when you leave the unit in Stop mode for about five minutes. Camera Angle DVD If the disc contains scenes recorded at different camera angles, you can change to a different camera angle during playback. 1.Press DISPLAY and then press the v / V to select a angle. The number of the current angle appears in the display window. 2.Select a desired angle pressing the b / B buttons Setup Initial Settings By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, read the page 8 to 10 8 Select when the unit is connected with PAL-TV. a b c d e To go to the next level: Press B. To go back to the previous level: Press b. GENERAL OPERATION 1. Press SETUP. The Setup menu appears. 2. Use v / V to select the desired option then press B to move to the second level. The screen shows the current setting for the selected item, as well as alternate setting(s). 3. Use v / V to select the second desired option and then press B to move to the third level. Dynamic Range Control (DRC) With the DVD*1 format, you can hear a program’s soundtrack in the most accurate and realistic presentation, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing clarity of sound. Set DRC to On for this effect. *1: Dolby Digital only Vocal Set Vocal to On only when a multi-channel karaoke DVD is playing. The karaoke channels on the disc will mix into normal stereo sound. 4 LOCK (Parental Control) 4. Use v / V to select the desired setting then press SELECT/ENTER to confirm your selection. Some items require additional steps. Rating 5. Press SETUP or PLAY to exit the Setup menu. 1. Select “Rating” on the LOCK menu then press B. 2. To access the LOCK options, you must input the password you have created. If you have not yet entered password, you are prompted to do so. 1 LANGUAGE OSD Select a language for the Setup menu and the onscreen display. Disc Audio / Subtitle / Menu Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. Original – Refers to the original language in which the disc was recorded. Other – To select another language, press numeric buttons and then SELECT/ENTER to enter the corresponding 4-digit number according to the language code list on the page 14. If you enter the wrong language code, press CLEAR. Blocks playback of rated DVDs based on their contents. Not all discs are rated. Input a password and press SELECT/ENTER. Enter it again and press SELECT/ENTER to verify. If you make a mistake before pressing SELECT/ENTER, press CLEAR. 3. Select a rating from 1 to 8 using the v / V buttons. Rating 1-8: Rating one (1) has the most restrictions and rating eight (8) is the least restrictive. Unlock: If you select unlock, parental control is not active and the disc plays in full. 4. Press SELECT/ENTER to confirm your rating selection, then press SETUP to exit the menu. Password 2 DISPLAY You can enter or change password. TV Aspect 1. Select Password on the LOCK menu and then press B. 2. Follow the step 2 as shown above (Rating). 4:3 – Select when a standard 4:3 TV is connected. 16:9 – Select when a 16:9 wide TV is connected. Display Mode The display Mode setting works only when the TV Aspect mode is set to “4:3”. To change the password, press SELECT/ENTER when the “Change” option is highlighted. Input a password and press SELECT/ENTER. Enter it again and press SELECT/ENTER to verify. Letterbox – Displays a wide picture with bands on the upper and lower portions of the screen. 3. Press SETUP to exit the menu. Panscan – Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit. If you forget your password, you can clear it using the following steps: 3 AUDIO 2. Input the 6-digit number “210499” and press SELECT/ENTER. The password is cleared. Each DVD disc has a variety of audio output options. Set the unit’s AUDIO options according to the type of audio system you use. If you forget your password 1. Press SETUP to display the Setup menu. To display and exit the Menu: Press SETUP to display the menu. A second press of SETUP will take you back to initial screen. 9 ENGLISH To display and exit the Menu: Press SETUP to display the menu. A second press of SETUP will take you back to initial screen. Area Code DivX(R) Registration Enter the code of the area whose standards were used to rate the DVD video disc, based on the list on page 14. We provide you the DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos based on the DivX® VOD service. For more information, visit www.divx.com/vod. 1. Select “Area Code” on the LOCK menu then press B. 2. Follow step 2 as shown in rating section. 3. Select the first character using v / V buttons. 4. Press B and select the second character using v / V buttons. 5. Press SELECT/ENTER to confirm your Area code selection. 5 OTHERS PBC(Playback Control) Playback control provides special navigation features that are available on some disc. Select [On] to use this feature. 1. Select “DivX(R) Registration” option and then press B. 2. Press SELECT/ENTER while “Select” is selected and the registration code will appear. Use the registration code to purchase or rent the videos from DivX® VOD service at www.divx.com/vod. Follow the instructions and download the video onto a disc for playback on this unit. 3. Press SELECT/ENTER to exit. Note : All the downloaded videos from DivX® VOD can only be played back on this unit. Playing an Audio CD or MP3/WMA/JPEG/DivX file Playing an Audio CD or MP3/WMA file This unit can play Audio CDs or MP3/WMA files. MP3/ WMA/ Audio CD Once you insert a cd with MP3/WMA files or Audio, a menu appears on the TV screen. Press v / V to select a track/file and then press PLAY or SELECT/ENTER, and playback starts. You can use variable playback functions. Refer to the Remote control page . Note: You can add all tracks in the disc. Select “ All)” icon then press SELECT/ENTER. (Add 3. Select the track you want to start playing on the “Program” list. Press MENU to move to the next page. 4. Press PLAY or SELECT/ENTER to start. Playback begins in the order in which you programmed the tracks. Playback stops after all of the tracks on the “Program” list have played once. 5. To resume normal playback from programmed playback, select a track of AUDIO CD (or MP3/WMA) list and then press PLAY. ID3 TAG Repeat Programmed Tracks When playing a file containing information such as track titles, you can see the information by pressing DISPLAY. [ Song, Artist, Album, Genre, Comment ] 1. Press REPEAT when playing a disc. The repeat icon appears. T ip Press MENU to move to the next page. On a CD with MP3/WMA and JPEG, you can switch MP3/WMA and JPEG. Press TITLE, and MUSIC or PHOTO top of the menu is highlighted. Programmed Playback The program function enables you to store your favorite tracks from any disc in the unit memory. A program can contain 300 tracks. 1. Insert a disc. Audio CD and MP3/WMA Discs: 2. Select a track on the “List”, and then press PROG./MEMO.or select “ (Add)” icon and then press SELECT/ENTER to place the selected track on the “Program” list. Repeat to place additional tracks on the list. 10 2. Press REPEAT to select a desired repeat mode. • TRACK: repeats the current track • ALL: repeats all the tracks on programmed list. • Off(No display): does not play repeatedly. Erasing a Track from “Program” List 1. Use v V to select the track that you wish to erase from the Program list. 2. Press CLEAR. Alternatively, select “ (Delete)” icon then press SELECT/ENTER to place the selected track on the Program list. Repeat to erase additional tracks on the list. Erasing the Complete Program List Use v / V to select “ SELECT/ENTER. (Del all)” and then press Note: The programs are also cleared when the disc is removed Zoom This unit can play discs with JPEG files. Before playing JPEG recordings, read the notes on JPEG Recordings on the page 16. Each time ZOOM is pressed the setting changes in the following order. Zoom on y Zoom off 1. Insert a disc and close the tray. The PHOTO menu appears on the TV screen. Press v, B or M to enlarge the video image. Press V, b or m to reduce the video image. 2. Press v / V to select a folder, and then press SELECT/ENTER. A list of files in the folder appears. If you are in a file list and want to return to the previous Folder list, use the v / V buttons on the Remote to highlight and press SELECT/ENTER. Playing a DivX Movie file 3. If you want to view a particular file, press v / V to highlight a file and press SELECT/ENTER or PLAY. While viewing a file, you can press STOP(x x) to move to the previous menu (JPEG menu). T ip There are four Slide Speed options : > (Slow), >> (Normal), >>> (Fast) and II (off). Use v /V /b /B to highlight the Speed. Then, use b / B to select the option you want to use and then press SELECT/ENTER. If you set Speed option to Off, the slide is not active. Slide Show Use v V b B to highlight the press SELECT/ENTER. (Slide Show) then Still Picture 1. Press PAUSE/STEP during the slide show. The Unit will now go into the PAUSE mode. 2. To return to the slide show, press PLAY or press PAUSE/STEP again. Moving to another File Using this DVD/CD unit you can play DivX disc. 1. Insert a disc and close the tray. The MOVIE menu appears on the TV screen. 2. Press v / V to select a folder and then press SELECT/ENTER. A list of files in the folder appears. If you are in a file list and want to return to the Folder list, use the v / V buttons on the remote to highlight and press SELECT/ENTER. 3. If you want to view a particular file, press v / V to highlight a file and press SELECT/ENTER or PLAY. 4. Press STOP(x x) to exit. T ip Press MENU to move to the next page. On a CD with MP3/WMA, JPEG and MOVIE file, you can switch MUSIC, PHOTO and MOVIE menu. Press TITLE and MUSIC, PHOTO and MOVIE word on top of the menu is highlighted. Note : • Be sure to select “SUBTITLE ON” mode by pressing the subtitle file every time before playing a DivX file . • When the subtitle has more than two languages in the file, original subtitle is only available. • You can not adjust sound mode while the DivX file playing. Press SKIP (. or >) once during viewing a picture to advance to the next or previous file. • The DivX subtitle file name has to be identified with the DivX Rotating the picture Notice for displaying the Divx subtitle Press v /V /b /B during showing a picture to rotate the picture clockwise or counter-clockwise. If the subtitle does not display properly during playback, press and hold SUBTITLE for about 3 seconds then press SUBTITLE to select another language code until the subtitle is displayed properly . file name to display by this unit. Timer function Setting the Clock 1 Press CLOCK. 2 Select a 24 hour cycle or 12 hour cycle by pressing . > on the front panel. 3 x ) to confirm the selected hour Press SET(x cycle. 4 Use . > on the front panel to set the corx). rect hours then press SET(x 5. Use . > on the front panel to set the corx). rect minutes press SET(x 6. Press CLOCK at any time to display the time for about 5 seconds. Note : If you want to reset the clock , press and hold CLOCK for more than 2 seconds. 11 ENGLISH Viewing a JPEG file Timer Function With the TIMER function you can turn CD, USB play and radio reception on or off at a desired time. 1. Press CLOCK to check the current time. (If you don’t set clock, the timer function doesn’t work.) 2. Press TIMER to enter the timer setting mode. If you want to correct the previously memorized TIMER setting, press and hold TIMER for more than 2 seconds. (If you want to check the previous memorized TIMER setting, press TIMER button briefly.) - The previous memorized time and “ ” indicator appear on display window. 3. Each function (TUNER t DVD t USB ) flashes on display window in turn. Press SET(x x) when the desired function is flashing. 4. a. When you select the TUNER function, select the previously memorized preset number by pressing . > on the front panel and then, press SET(x x). b. When you select the DVD, USB function, - ‘ON TIME’ appears for about 0.5 seconds on display window and then disappears. 7. Refer to the steps 5 - 6 and set the hour/ minute to switch off. 8. Adjust the volume level by pressing . > on the front panel and press SET(x x). 9. Switch the system off. The selected function is automatically switched on or off at the time set. To cancel or check the timer Each time the TIMER button is pressed you can select the timer set or cancel. You can also check the timer setting status. To activate or check the timer, press the TIMER button repeatedly so that “ ” appears in the display window. To cancel the TIMER, press the TIMER button repeatedly so that “ ” disappears from the display window. Note: • If you insert the DVD or DivX except audio CD/MP3/WMA on the unit, the timer function will be operated to the TUNER. • This is not supported in the multi card reader. 5. Set the hour to switch on pressing . > on the front panel and press SET(x x). 6. Set the minute to switch on pressing . > on the front panel and press SET(x x). - ‘OFF TIME’ appears for about 0.5 seconds on display window and then disappears. TUNER Presetting radio stations You can preset 50 stations for FM and AM (optional) (MW). Before tuning, make sure that you have turned down the volume. 1. Press TUNER/BAND to select the frequency (AM or FM) you want. 2. Select a station you want by pressing TUN. -/+ (b/B). Tuning in automatically - Press TUN. -/+ (b/B) for more than 0.5 second. Scanning stops when the unit tunes in a stations. Tuning in manually - Press TUN. -/+ (b/B) briefly and repeatedly. 3. Press PROG./MEMO.. A preset number will flash in the display window. v/V V) to select the preset num4. Press PRESET -/+ (v ber you want. 5. Press PROG./ MEMO. again. The station is stored. 12 6. Repeat the steps 1 (or 2) to 5 to store other stations. To delete all the memorized stations Press and hold PROG./ MEMO. for about two seconds “CLEAR” appears in the display window and then PROG./ MEMO. again, the stations are deleted. For your reference If all stations have already been entered, “FULL” message will appear in the display window for a moment and then a preset number will flash. To change the preset number, follow the steps 4-5. To recall presets v/V V) until the desired prePress and hold PRESET-/+ (v set number appears or press it repeatedly Listening to the Radio 1. Press TUNER/BAND to select the frequency (AM (optional) or FM) you want. The last received station is tuned in. To turn off the radio Press ( 1) POWER to turn the unit off or select another function mode (DVD/CD, USB,PORTABLE,AM(optional)/FM). ENGLISH 2. Press PRESET-/+ (v/V) repeatedly to select the preset station you want. - Each time you press the button, the unit tunes in one preset station at a time. 3. Adjust the volume by pressing VOLUME (-/+) repeatedly. RDS Operation -Optional This unit is equipped with RDS (Radio Data System), which brings a wide range of information to FM radio. RDS, now being used in many countries, is a system for transmitting station call signs or network information, a description of station programme type text message about the station or specifics of musical selection and the correct time. RDS TUNING When a FM station is tuned in and it contains RDS data, the unit will automatically display the station’s call sign and the RDS indicator will light in the Display Window as well as indicators for the RDS services programme (PS), programme type recognition (PTY), Radio text (RT) and Clock Time (CT) if transmitted by the station. RDS DISPLAY OPTIONS The RDS system is capable of transmitting a wide variety of information in addition to the initial call sign that appears when a station is first tuned. In normal RDS operation the display will indicate the station name, broadcast network or call letters. Pressing RDS on the remote control enables you to cycle through the various data types in the sequence: (PS → FREQUENCY → PTY → RT → CT) PS (Programme Service name)- The name of the channel is shown in the Display Window. PTY (Programme type recognition)- The name of the programme type is shown in the Display Window. RT (Radio text)- A “text” message contains special information from the broadcast station. Note that this message may scroll across the display to permit message. CT (Time controlled by the channel)- Enables the unit to receive the actual time and show it in the Display Window. Note : Some RDS stations may not choose to include some of these additional features. If the data required for the selected mode is not being transmitted, the Display Window will show a PTY NONE, RT NONE, CT NONE, or PS NONE message. Programme Search (PTY) A major benefit of RDS is its ability to encode broadcasts with Programme Type (PTY) codes that indicate the type of material being broadcast. The following list shows the abbreviations used to indicate each PTY along with an explanation of the PTY. NEWS AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP M ROCK M EASY M LIGHT M CLASSICS OTHER M WEATHER FINANCE CHILDREN SOCIAL RELIGION PHONE IN TRAVEL LEISURE JAZZ COUNTRY NATION M OLDIES FOLK M DOCUMENT TEST ALARM ! News Current Affairs Information Sports Educational Drama Culture Science Varied Speech Programme Popular Music Rock Music Easy Listening Music Light Music Classical Music Other Music Weather Information Financial Programmes Children’s Programmes Social Affairs Programmes Religious Broadcasts Phone-In Programmes Travel and Touring Leisure and Hobby Jazz Music Country Music National Music Oldies Music Folk Music Documentary Programmes Station Alarm Test Message Emergency Broadcast Information You may search for a specific Programme Type (PTY) by following these steps: 1. Press TUNER/ BAND to select the FM mode. 2. Press PTY on the remote control, the display will show the last PTY in use. 3. Press PTY repeatedly to select a desired PTY. 4. When the PTY is selected, press TUN.(-/+).The unit will go into an automatic search mode.When a station is tuned, the search will stop. 13 Reference Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu. Language Abkhazian Afar Afrikaans Albanian Ameharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali; Bangla Bhutani Bihari Breton Bulgarian Burmese Byelorussian Cambodian Catalan Chinese Corsican Croatian Czech Danish Dutch English Esperanto Estonian Faroese Code 6566 6565 6570 8381 6577 6582 7289 6583 6588 6590 6665 6985 6678 6890 6672 6682 6671 7789 6669 7577 6765 9072 6779 7282 6783 6865 7876 6978 6979 6984 7079 Language Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guarani Gujarati Hausa Hebrew Hindi Hungarian Icelandic Indonesian Interlingua Irish Italian Japanese Javanese Kannada Kashmiri Kazakh Kirghiz Korean Kurdish Laothian Latin Latvian, Lettish Code 7074 7073 7082 7089 7176 7565 6869 6976 7576 7178 7185 7265 7387 7273 7285 7383 7378 7365 7165 7384 7465 7487 7578 7583 7575 7589 7579 7585 7679 7665 7686 Language Lingala Lithuanian Macedonian Malagasy Malay Malayalam Maltese Maori Marathi Moldavian Mongolian Nauru Nepali Norwegian Oriya Panjabi Pashto, Pushto Persian Polish Portuguese Quechua Rhaeto-Romance Rumanian Russian Samoan Sanskrit Scots Gaelic Serbian Serbo-Croatian Shona Sindhi Code 7678 7684 7775 7771 7783 7776 7784 7773 7782 7779 7778 7865 7869 7879 7982 8065 8083 7065 8076 8084 8185 8277 8279 8285 8377 8365 7168 8382 8372 8378 8368 Area Malaysia Maldives Mexico Monaco Mongolia Morocco Nepal Netherlands Netherlands Antilles New Zealand Nigeria Norway Oman Pakistan Panama Paraguay Philippines Poland Portugal Romania Russian Federation Code MY MV MX MC MN MA NP NL AN NZ NG NO OM PK PA PY PH PL PT RO RU Language Singhalese Slovak Slovenian Somali Spanish Sudanese Swahili Swedish Tagalog Tajik Tamil Tatar Telugu Thai Tibetan Tigrinya Tonga Turkish Turkmen Twi Ukrainian Urdu Uzbek Vietnamese Volapük Welsh Wolof Xhosa Yiddish Yoruba Zulu Code 8373 8375 8376 8379 6983 8385 8387 8386 8476 8471 8465 8484 8469 8472 6679 8473 8479 8482 8475 8487 8575 8582 8590 8673 8679 6789 8779 8872 7473 8979 9085 Area Codes Choose a area code from this list. Area Afghanistan Argentina Australia Austria Belgium Bhutan Bolivia Brazil Cambodia Canada Chile China Colombia Congo Costa Rica Croatia Czech Republic Denmark Ecuador Egypt El Salvador 14 Code AF AR AU AT BE BT BO BR KH CA CL CN CO CG CR HR CZ DK EC EG SV Area Ethiopia Fiji Finland France Germany Great Britain Greece Greenland Code ET FJ FI FR DE GB GR GL Heard and McDonald Islands HM Hong Kong HK Hungary HU India IN Indonesia ID Israel IL Italy IT Jamaica JM Japan JP Kenya KE Kuwait KW Libya LY Luxembourg LU Area Saudi Arabia Senegal Singapore Slovak Republic Slovenia South Africa South Korea Spain Sri Lanka Sweden Switzerland Taiwan Thailand Turkey Uganda Ukraine United States Uruguay Uzbekistan Vietnam Zimbabwe Code SA SN SG SK SI ZA KR ES LK SE CH TW TH TR UG UA US UY UZ VN ZW Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Cause Symptom Correction • The power cord is disconnected. • Plug the power cord into the wall outlet securely. The power is on, but the unit does not work. • No disc is inserted. • Insert a disc. (Check that the DVD or, audio CD indicator in the DVD display is lit.) No picture. • The TV is not set to receive DVD signal output. • Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen. • The video cable is not connected securely. • Connect the video cable into the jacks securely. • The connected TV power is turned off. • Turn on the TV. • The equipment connected with the audio cable is not set to receive DVD signal output. • Select the correct input mode of the audio so you can listen to the sound from the unit. • The audio cables are not connected securely . • Connect the audio cable into the jacks securely. • The power of the equipment connected with the audio cable is turned off. • Turn on the equipment connected with the audio cable. There is no sound or only a very low-level sound is heard. ENGLISH No power. • The audio connecting cord is damaged. • Replace it with new one. The playback picture is poor. • The disc is dirty. • Clean the disc. The unit does not start playback. • No disc is inserted. • Insert a disc. (Check that the DVD, or audio CD indicator in the DVD display is lit.) • An unplayable disc is inserted. • Insert a playable disc. (Check the disc type, color system and Regional code.) • The disc is placed upside down. • Place the disc with the playback side down. • The disc is not placed within the guide. • Place the disc on the disc tray correctly inside the guide. • The disc is dirty. • Clean the disc. • A menu is on the TV screen. • Press the SETUP button to turn off the menu screen. • The Rating level is set. • Cancel the Rating function or change the rating level. • The plugs and jacks are dirty. • Wipe them with a cloth slightly moistened with alcohol. • The disc is dirty. • Clean the disc. • The speakers and components are connected poorly. • Connect the speakers and components securely. • The unit is located with too close to the TV. • Move your TV away from the audio components. • The antenna is positioned or connected poorly. • Connect the antenna securely. • The signal strength of the stations is too weak (when tuning in with automatic tuning). • Tune in the station manually. • No stations have been preset or preset stations have been cleared (when tuning by scanning preset stations). • Preset the stations. • The remote control is not pointed at the remote sensor of the unit. • Point the remote control at the remote sensor of the unit. • The remote control is too far from the unit. • Operate the remote control within about 23 ft (7 m). • There is an obstacle in the path of the remote control and the unit. • Remove the obstacle. Severe hum or noise is heard. Radio stations cannot be tuned in. The remote control does not work properly. • Adjust the antennas and connect an external antenna if necessary. 15 MP3 / WMA disc compatibility with this player is limited as follows: • Some discs may not operate due to a different recording format or the condition of disc. • Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48kHz (WMA) • File extensions: “.jpg” • Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA) • File extensions: “.mp3” / “.wma” DivX disc compatibility with this player is limited as follows: • Available resolution: within 800x600 (W x H) pixels • CD-ROM file format: ISO9660 • The file name of the DivX subtitle is available by 45 characters. • We recommend that you use Easy-CD Creator, which creates an ISO 9660 file system. • If there is impossible code to express in the DivX file, it may be displayed as " _ " mark on the display. • The total number of characters for file name: maximum 8 characters (excluding file extensions like mp3/wma) • Frame rate : less than 30 fps • They should not contain special letters such as / ? * : “ < > l etc. • The total number of files on the disc should be less than 999. Customers should note that permission is required in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner. JPEG disc compatibility with this player is limited as follows: • Image file size: less than 2M pixels (2760 x 2048 pixels) recommended (It may take longer to display a lager than 2M pixel size files) • Maximum files : Under 999. • If the video and audio structure of recorded files is not interleaved, either video or audio is outputted. • Playable DivX file: ".avi ", ".mpg ", ".mpeg ", ".divx" • Playable Subtitle format: SubRip(*.srt/*.txt), SAMI(*.smi), SubStation Alpha(*.ssa/*.txt), MicroDVD(*.sub/*.txt), SubViewer 2.0(*.sub/*.txt), VobSub(*.sub) • Playable Codec format: DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "MP43 ", "3IVX ". • Playable Audio format: "AC3 ", "PCM ", "MP3 ", "WMA ". • Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48kHz (WMA) • Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA) Specifications General Power supply Power consumption Net Weight External dimensions (W x H x D) Refer to the main label. Refer to the main label. 1.5 kg 150 X 150 X 205 mm Tuner/Amplifier FM Tuning Range 87.5 - 108.0 MHz or 65 -74 MHz, 87.5 -108.0 MHz Intermediate Frequency 10.7 MHz Signal to Noise Ratio 60/55 dB (Mono/Stereo) Frequency Response 140 - 10000 Hz AM (optional) Tuning Range 522 - 1620 kHz or 520 - 1720 kHz Intermediate Frequency 450 kHz Signal to Noise Ratio 30 dB Frequency Response 140 - 1800 Hz Output Power Front: 5 W + 5 W (6Ω, THD 10 %) Frequency Response 30 - 20000 Hz Signal-to-noise ratio 75 dB Speakers Speaker Name(L/R) Type Impedance Net Dimensions (W x H x D) Net Weight XBS12V Bass Reflex1Way 1Speaker 6Ω 150 X 150 X 150 mm 1.05 kg Designs and specifications are subject to change without notice for improvement.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project