Product Specifications: CLSI-C6MRF

Product Specifications: CLSI-C6MRF
iLux® Integrated Lighting System w/Motion Detector & infiNET™ - International Version
>> Wall mount integrated lighting and shade control
>> 6 channels of dimming or switching
>> 6 groups of shade and drape control
>> Linkable for up to 54 lighting channels and 54 shade groups
>> Up to 16 user-settable scenes | Large ON and OFF buttons
>> 7 configurable “rocker” buttons with customizable label strip
>> Flip-up front cover reveals setup controls and programming port
>> 6 bargraphs show lighting levels and shade positions
>> Easy setup from front panel or iLux Designer software
>> Built-in motion detector | Optional IR remote
>> Supports multipoint control using up to 16 keypads
>> Master air-gap relay
>> Integrates with 2-Series control systems via infiNET RF wireless
>> Energy saving ASHRAE 90.1/LEED compliant
>> Available in almond, black, or white
The iLux CLSI-C6MRF is a complete, integrated lighting system designed
for wall mount installation in boardrooms, auditoriums, home theaters,
or anywhere versatile and cost-effective control of lighting and shades is
required. Crestron’s reputation for innovation and reliability, combined with
high-quality integrated dimming, native shade control, and extensive
customization and integration ability make iLux the ideal choice for all
types of room lighting and shade control applications.
LED beside each button, and the customizable label strip allows each
button to be clearly labeled using Crestron Engraver software or standard
3/8” tape labels. Dimming levels and shade positions are displayed
graphically on 6 green LED bargraphs accessible behind the flip-up front
cover. Additional controls and a numeric display hidden beneath the cover
enable setup without requiring a PC. Enhanced customization is provided
via the PC programming port using iLux Designer software.
6 Channel Dimming
The CLSI-C6MRF features six channels of dimming for LED[1],
incandescent, magnetic low-voltage, neon/cold cathode, and 2-wire
dimmable fluorescent loads. On/off switching of many non-dimmable
lighting loads is also possible. Each channel will handle up to 800 watts
individually, with a total rating of up to 2400 watts for the complete unit.
Larger loads and additional load types can also be supported using
Crestron CLS-EXP Series expansion modules.
Built-in Motion Detector
The CLSI-C6MRF features a built-in infrared motion detector, enabling
automated control based on room occupancy. Lights can be programmed
to turn on and shades open automatically when someone enters the room,
or turn off and close when the room is left empty.
6 Group Shade Control
Using Crestron’s networked Shade and Drape Controllers, the CLSI-C6MRF
enables versatile control of a roomful of motorized window treatments,
screens and lifts in up to 6 shade groups.
Versatile Front Panel Controls
The deceptively clean front panel actually affords an extensive amount of
control and customization to suit each unique room application. Large ON
and OFF buttons provide instant access to the “On” and “All Off” scenes,
while the six main buttons can be set up to recall additional scene presets,
adjust shades, or perform a host of other functions. The buttons’ “rocker”
action enables intuitive, tactile control for adjusting lighting levels and
shade positions. An additional “Up/Down” button is configurable for a
variety of functions, including use as a master lighting or shade control, or
as a “shift” button to expand the capabilities of the six main buttons.
With each new scene selection, window shades reposition and lights fade
elegantly to their new settings. The selected scene is indicated by a white
| 800.237.2041
Multipoint Keypad Control
Up to 16 Crestron keypads may be connected to a single CLSI-C6MRF,
providing versatile multipoint control for rooms with multiple entrances or
work areas.
Multi-Unit Expansion
One CLSI-C6MRF master will support up to 8 additional CLSI-C6 or
CLSI-C6M units, enabling systems of up to 54 lighting zones and 54 shade
groups. Commands for typical functions like scene recall, scene off, master
dimming, and occupancy status are shared between the CLSI-C6MRF and
CLSI-C6(M) units. Each individual unit can still support a complete
assortment of local devices including keypads and shade controllers.
Control System Integration via infiNET™
The CLSI-C6MRF employs Crestron’s infiNET technology to enable a
wireless link to a 2-Series control system. A single C2N-MNETGW gateway
connected to the control system enables 2-way wireless communications
between the iLux system and the central control system, allowing iLux’s
functions to be controlled from touchpanels, RF wireless remotes, and
even computers. The control system interface also enables extensive
flexibility for integration with other systems such as security, HVAC and
CLSI-C6MRF iLux® Integrated Lighting System w/Motion Detector & infiNET™ - International Version
energy management, plus remote monitoring via SNMP and Crestron
RoomView® applications.
Several infiNET-based iLux systems can coexist on one infiNET wireless
network along with other infiNET dimmers, switches, and thermostats.
For a solution using a wired Cresnet connection instead of infiNET, use the
Load Ratings
Dimmer Channels: 6
Maximum Per Channel: 800 Watts/VA (3.5 Amps @ 230 Volts AC), expandable via Expansion Modules (sold separately)
Minimum Per Channel: 25 Watts/VA (0.108 Amps @ 230 Volts AC)
Module Total: 2200 Watts/VA (10 Amps @ 220 Volts AC);
2300 Watts/VA (10 Amps @ 230 Volts AC);
2400 Watts/VA (10 Amps @ 240 Volts AC)
Load Types: LED[1], Incandescent, Magnetic Low-voltage, Neon/Cold Cathode, 2-Wire Dimmable Fluorescent, & Non-Dim Lighting (also: Electronic
Low-voltage, 3 and 4-Wire Fluorescent, High-Inrush Switching, & 277V via
CLS-EXP Series expansion modules)
Power Requirements
220 to 240 Volts AC, 50/60Hz line power
LOCAL DEVICES: (1) 4-pin 5mm detachable terminal block;
Cresnet Master port for local devices including:
C2N-DB and CNX-B Series keypads, 16 maximum;
C2N-SSC-2 and C2N-SDC-DC shade controllers; 16 maximum;
Additional CLSI-C6 or CLSI-C6M units, 8 maximum;
Additional CNPWS-75 or other Cresnet power supply required beyond 4
devices; C2N-SDC-DC always requires an additional power supply
HOT: (1) Captive screw terminal[2], line power input
LOAD1 – LOAD6: (6) Captive screw terminals[2], dimmer channel outputs
NEUTRAL: (1) Captive screw terminal[2]
GROUND: (1) Captive screw terminal[2]
PC (front): (1) 3.5mm TRS mini-phone jack, RS-232 Programming port
LED Indicators
Scenes: (6-white) Correspond with each “Scene” Button
High/Low: (2-white) Indicate “Shift” status
ON: (1-white) Indicates “On” Scene is selected
LIGHTS, SHADES: (2-green) Indicates “Lights” or “Shades” mode is active
SAVE, CANCEL: (2-green) Correspond with “Save” and “Cancel” Buttons
MIN, SEC: (2-green) Indicates display of “Minutes” or “Seconds”
1 – 6: (6-green) 7-Segment bargraphs, indicate lighting levels and shade
Numeric Display: (2-green) 8-Segment digits, indicates modes and setup
IR Receiver
Reception Frequency: 36 kHz
Requires CLS-IRHT8 IR remote
Motion Detector
Type: Infrared
Range: 20 to 30 feet at 4 foot elevation
RF Wireless
RF Transceiver: 2-way RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.6
MHz), IEEE 802.15.4 compliant
Range (typical): 150 feet indoor, 250 feet outdoor;
Subject to site-specific conditions; range is increased by adding additional
devices or C2NI-MNETRPT repeater
Gateway: Requires a C2N-MNETGW RF gateway
Temperature: 32° to 104°F (0° to 40°C)
Humidity: 10% to 90% RH (non-condensing)
Buttons 1 – 6: (6) 3-position rocker pushbuttons; configurable to recall (or
toggle recall/off) individual scenes, control shades, or for master lighting or
shade control; “scene mastering” option enables manual dimming utilizing
rocker button action; also used to adjust lighting levels when in “Lighting”
mode and shade positions when in “Shades” mode; additional functionality
configurable via software
Up/Down Button: (1) 3-position rocker pushbutton; configurable for
master lighting or shade control, or as a “shift” for Buttons 1-6; additional
functionality configurable via software
ON: (1) pushbutton, recalls “On” scene
OFF: (1) pushbutton, turns all lights off
LIGHTS, SHADES: (2) Pushbuttons, select “Lights” or “Shades” modes
SAVE, CANCEL, ^, v: (4) Pushbuttons, navigate and execute setup
Reset: Recessed miniature pushbutton for hardware reset
Dimming Ramp Rate: 5 seconds (default), software adjustable 1 to 10
Scene Fade Time: 2 seconds (default), software adjustable 0 seconds to
99 minutes
| 800.237.2041
Mounts in a 4-gang electrical box, 3-1/2” deep minimum
Height: 4.48 in (11.38 cm)
Width: 8.89 in (22.58 cm)
Depth: 2.60 in (6.61 cm)
1.43 lb (0.65 kg)
CLSI-C6MRF iLux® Integrated Lighting System w/Motion Detector & infiNET™ - International Version
CRESNET-NP-TL-B500: Cresnet® Control Cable, non-plenum, teal, 500 ft
Available Models
CRESNET-NP-TL-SP1000: Cresnet® Control Cable, non-plenum, teal, 1000
ft spool
CLSI-C6MRFA: iLux Integrated Lighting System w/Motion Detector &
infiNET™ - International Version, 230V, Almond
CLSI-C6MRFB: iLux® Integrated Lighting System w/Motion Detector &
infiNET™ - International Version, 230V, Black
CLSI-C6MRFW: iLux® Integrated Lighting System w/Motion Detector &
infiNET™ - International Version, 230V, White
CRESNET-NP-TL-SP500: Cresnet® Control Cable, non-plenum, teal, 500 ft
CRESNET-NP-YL-B500: Cresnet® Control Cable, non-plenum, yellow, 500
ft box
CRESNET-P-BK-SP500: Cresnet® Control Cable, plenum, black, 500 ft
Available Accessories
C2N-CBD-E: Cameo® Express Keypad, Standard Mount
C2N-CBD-P: Cameo® Keypad, Standard Mount
C2N-CBF-P: Cameo® Keypad, Flush Mount
CLS-EXP-DIM: iLux® Dimmer Expansion Module
CLS-EXP-DIMFDB: iLux 3-Wire Fluorescent Dimmer Expansion Module
CLS-EXP-DIMFLV: iLux 0-10V Fluorescent Dimmer Expansion Module
CRESNET-P-OR-SP500: Cresnet® Control Cable, plenum, orange, 500 ft
CRESNET-P-TL-SP1000: Cresnet® Control Cable, plenum, teal, 1000 ft
CRESNET-P-TL-SP500: Cresnet® Control Cable, plenum, teal, 500 ft spool
CRESNET-P-YL-SP500: Cresnet® Control Cable, plenum, yellow, 500 ft
CLS-EXP-DIMU: iLux® Universal Dimmer Expansion Module
C2N-DB6: Decorator Keypad, 6-Buttons,
C2N-DB8: Decorator Keypad, 8-Buttons
1. For a list of compatible ballasts, visit (PDF)
2. Captive screw terminals accept up to two 22 to 12 AWG (0.34 to 4.0 mm2) wires per terminal.
C2N-DB12: Decorator Keypad, 12-Buttons
C2N-MNETGW: infiNET™ Gateway
C2N-MNETRPT: infiNET™ Repeater
C2N-SDC: Shade and Drape Controller, 120V AC
C2N-SDC-DC: Shade and Drape Controller, 24V DC
C2N-SSC-2: Somfy® Shade Controller
CLS-IRHT8: iLux® IR Handheld Remote
CNPWS-75: Cresnet® Power Supply, 75 Watts
CNX-B2: Designer Keypad, 2-Buttons
CNX-B4: Designer Keypad, 4-Buttons
CNX-B6: Designer Keypad, 6-Buttons
CNX-B8: Designer Keypad, 8-Buttons
CNX-B12: Designer Keypad, 12-Buttons
CRESNET-HP-NP-TL-SP1000: Cresnet® “High-Power” Control Cable, nonplenum, teal, 1000 ft spool
CRESNET-HP-NP-TL-SP500: Cresnet® “High-Power” Control Cable, nonplenum, teal, 500 ft spool
CRESNET-NP-BK-B500: Cresnet® Control Cable, non-plenum, black, 500
ft box
CRESNET-NP-OR-B500: Cresnet® Control Cable, non-plenum, orange, 500
ft box
CRESNET-NP-TL-B250: Cresnet® Control Cable, non-plenum, teal, 250 ft
| 800.237.2041
This product may be purchased from an authorized Crestron dealer. To find a dealer, please
contact the Crestron sales representative for your area. A list of sales representatives is available
online at or by calling 800-237-2041.
Specifications subject to change without notice. Crestron is not responsible for errors in
typography or photography.
Crestron, the Crestron logo, iLux, infiNET, Cresnet and Roomview are trademarks or registered
trademarks of Crestron Electronics, Inc. in the United States and other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the
marks and names or their products. Crestron disclaims any proprietary interest in the marks and
names of others. ©2012 Crestron Electronics, Inc.
CLSI-C6MRF iLux® Integrated Lighting System w/Motion Detector & infiNET™ - International Version
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400
| Fax: 201.767.1903
All Crestron products are proudly manufactured in the United States.
All brand names, product names and trademarks are the property of their respective owners.
©2012 Crestron Electronics, Inc.
Specifications subject to change without notice. Revised 01/19/12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF