HeliPal Storm SRD127 drone User manual

HeliPal Storm SRD127 drone User manual

The Storm SRD127 is a small, agile drone designed for experienced pilots. It features a BetaFlight controller, a powerful video transmitter, and a durable carbon fiber frame. It is ideal for freestyle flying, racing, and other acrobatic maneuvers.

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

Storm SRD127 User Manual | Manualzz

Storm

SRD127

with BetaFlight Controller

USER MANUAL

V1.0

Copyright@2016 HeliPal.com. All Rights Reserved

DISCLAIMER

Please read this disclaimer carefully before using this product. This product is a hobby with motors but not a toy which is not suitable for people under the age of

18. By using this product, you hereby agree to this disclaimer and signify that you have read them fully. You agreed that you are responsible for your own conduct and content while using this product, and for any consequences thereof.

Before you fly the drone

1) Make sure all connections are good, and keep children and animals away during flying, firmware update, system calibration and parameter setup.

2) Always fly the drone away from unsafe conditions, such as obstacles, crowds, high-voltage lines, etc.

3) Do not use in bad weathers such as rainy day, snow, windy (more than moderate breeze), hail, lighting, tornadoes, hurricanes etc.

4) Check whether the propellers and the motors are installed correctly and firmly before flight. Make sure the rotation direction of each propeller is correct.

5) Check whether all parts of the drone are in good condition before flight. Do not fly with aging or broken parts.

6) Never overcharge LiPo batteries. Do not charge above 4.2V per cell. When the battery is fully charged, disconnect it from the charger. Never leave the battery charger unattended during charging.

7) Never discharge batteries to below 3.3V per cell

8) Remove batteries when not using the drone.

Copyright@2016 HeliPal.com. All Rights Reserved

Quick Start - Radiolink T8FB Radio Controller

Copyright@2016 HeliPal.com. All Rights Reserved

Copyright@2016 HeliPal.com. All Rights Reserved

How to Control - Radiolink T8FB Radio Controller

Copyright@2016 HeliPal.com. All Rights Reserved

Motors and propellers rotation

Copyright@2016 HeliPal.com. All Rights Reserved

FPV System

The video transmitter has up to

32 different video channels, available to avoid interference with other channels.


Frequency Table

( DIP switch is the blackbox)

If two or more drones are flying at the same time, try to select different video frequency to avoid video interference. The bigger different in video frequency between drones, the less interference generated. Always check the supported channels of you FPV reception devices such as monitor, goggles

Copyright@2016 HeliPal.com. All Rights Reserved

advertisement

Key Features

  • BetaFlight controller
  • Video transmitter
  • Carbon fiber frame
  • Durable design
  • Powerful motors
  • FPV camera

Frequently Answers and Questions

How do I connect the drone to my radio transmitter?
The Storm SRD127 comes with a Radiolink T8FB radio controller. To connect the drone, simply bind the receiver to the transmitter. Refer to the Radiolink T8FB manual for specific instructions.
What type of battery does the Storm SRD127 use?
The Storm SRD127 uses LiPo batteries. Make sure to use a battery with the correct voltage and capacity. Never discharge the battery to below 3.3V per cell.
How do I change the video frequency on the video transmitter?
The video transmitter has 32 different video channels. You can select a channel by using the DIP switch on the video transmitter. Make sure to select a different video frequency than other drones flying in the area to avoid interference.

Related manuals

Download PDF

advertisement