Model Name

Power

Standby energy consumption

Main body energy consumption

Battery

Diameter

Height

Weight

Speed

Filter

Sensor

Charging Time

Usage Time

Noise Level eX300

(YCR-M05-P )

100 V ~ 240 V

Below 1 W

10 W

Lithium lon Battery

13.8 inches

3.5 inches

6.06 Ibs

300 mm/s (Max.)

Antibacterial filter

IR, PSD, Encoder, Bumper

110 min.

120 min.

(based on normal floor)

58 dB[A]

Yujin Robot Customer Support : 1.855.926.1601

ㆍ Monday-Friday 9 am to 6pm PST

ㆍ Saturdays

ㆍ Sundays

Closed

Closed

MADE IN KOREA

©2014 Yujin Robot Inc.

16410 Manning Way, Cerritos, CA 90703 [email protected]

T 562.926.1601 F 562.926.1629

www.yujinrobotusa.com

One-Year Limited Warranty.

Specifications and features are subjected to change without notice.

iPMN.USA.300.V0

YCR-M05

User Guide

Robotic Vacuum Cleaner eX300

■Please be sure to read the Safety Precautions before use.

www.yujinrobotusa.com

SAFETY PRECAUTIONS

COMPONENTS

REFERENCE Using remote control

Details for best cleaning

Operation principles of robot cleaner

• Principles of running

• Suction of robot cleaner

INSTALLING THE ROBOT CLEANER Check list before using

• Assemble side-brush

• Insert remote control battery

• Assemble ultra Microfiber Mop

Precaution before using

• Installation of charging station

• Charging

8

9

USAGE OF ROBOT CLEANER Usage of robot cleaner

• Start / Stop cleaning

• Set cleaning time

• Movement / Manual cleaning / Auto-charging

10

CARE & MAINTENANCE • Emptying dust bin and servicing

the antibacterial filter

• Cleaning main-brush

• Cleaning side-brush

• Cleaning sensors

• Cleaning front wheel

STORAGE

CHECK BEFORE REPAIR REPORT

DISPLAY CHECK MESSAGE

12

14

15

16

2

5

6

1

Please read this manual carefully and follow all warnings and instructions.

Prohibition

Users must be aware of prohibited operation of this product.

Warning

Users must follow the instructions to avoid serious injury or death.

Caution

Users must follow the instructions to avoid injury or product damage.

2

Warning

Electric and power cord precautions

- Do not wrap the power cord tightly or place heavy objects on it.

→ It may cause electric shock or fire.

- Keep the pin and interface of the power plug clean from dust or water.

→ It may cause malfunction or electric shock.

- Do not pull the power cord or touch the power plug with wet hands.

→ It may cause electric shock or fire.

- Do not use a damaged power plug or power cord, or insert the power plug into a

loose outlet.

→ It may cause electric shock or fire.

- In the event water enters the internal part of the cleaner, the product should be sent

for service even though the product was dried.

- Do not repeatedly plug and unplug the product.

→ It may cause electric shock or fire.

- Caution should be taken when plugging the adapter directly into the charging socket.

→ It may cause electric shock or fire.

Precautions before using

Prohibition

Warning

Caution

Caution

Caution

Caution

Caution

Warning

Caution

Warning

- Do not touch the charger's power cord with wet hands.

→ It may cause electric shock.

- Arrange cables or wires before use to avoid entangling with the robot

→ It may cause fire or electric shock due to damaged cable.

- Remove light objects or clothes before use.

→ It may damage the object or clothing while robot is in use.

- Remove small or fragile objects from the cleaning area before use.

→ Fragile objects may be damaged.

→ Remove coins or expensive jewelries before cleaning.

- Clear the floor of objects that may get in the way.

→ Thin towels. pads, power cords, table clothes, etc., may get tangled with the wheels.

Also objects on a table may fall off if the robot bumps a table.

- Empty the dust bin before operating the robot cleaner.

→ Suction function may not perform well if dust bin is full.

- Check that the main components such as antibacterial filter, brush

and dust bin are assembled properly before cleaning.

→ In the event you use the robot cleaner without the main components, such as the

antibacterial filter or brush, the product will not clean properly and such operation

may damage the product. Also, children and pets may be deemed as a barrier by

the robot cleaner resulting in certain areas not being cleaned.

- Do not operate robot cleaner when children or pets are present and left alone.

→ The children or pets may be attracted to the robot cleaner and may hurt themselves attempting

to play with the product.

- Do not place the power cord on the floor when installing charging station.

→ Robot cleaner may drag the power line while auto-charge or cleaning.

- Keep the top of the charging station away from water.

→ It may cause electric shock or fire.

3

4

Warning

Caution

Caution

Caution

Caution

Caution

Precautions while using

- In the event an unusual sound, smell or smoke emanates from the product, immediately

turn off the robot cleaner and place it a safe distance away from anything flammable.

→ It may cause electric shock or fire.

- Do not use the robot cleaner on a table or any high surface.

→ It may damage the product.

- In rare instances the robot cleaner may scratch or otherwise damage particular flooring.

In this event, discontinue use.

- In the event a large piece of plastic or other substance is suctioned up, remove it immediately.

→ Serious damage to the robot cleaner can occur when it is used for a period of time with its suction

duct clogged.

- Remove the robot cleaner to another area when it is blocked by a threshold of the entrance

or porch.

- Prevent the robot cleaner from suctioning liquid materials.

- Do not use the robot cleaner near flammables such as cigarettes, hot materials or gasoline.

→ It may cause fire.

- Do not use use the robot cleaner outdoors.

Caution

Warning

Warning

Warning

Warning

Warning

Caution

Caution

Caution

Precautions after using

- In the event a foreign substance is stuck to the sensor mechanism, the robot cleaner may malfuction.

- Prior to cleaning off foreign substances, turn OFF the power switch and then use the provided cleaning

brush to remove.

→ If the robot cleaner operates all of the sudden, it may cause injury or serious damage to the product.

- In the event the robot cleaner or components are destroyed, contact the manufacturer or service

center for repair.

→ It may cause electric shock or fire.

- Prior to cleaning the charging station, first pull out the power plug for safety reasons.

- Mishandling of the battery may cause an explosion or fire. At the end of the battery's service

life dispose the battery in a lawful manner.

→ It may cause fire.

- Do not spray water directly on the product or wipe the robot cleaner with volatile materials such as

benzene, thinner or alcohol when cleaning the product.

- Do not apply undue pressure to the bumper.

→ In case the bumper sensor is damaged, it may crash on the wall or with furniture.

- Do not disassemble, repair or alter the product except by an authorized service provider.

→ It may damage the product.

Components

Robot Vacuum Cleaner Charging Station

Cleaning Brush

(Cleaning Brush is

contained inside of

charging station)

Side-Brush

YCR-M05

User Guide

Robotic Vacuum Cleaner eX300

YCR-M05

Quick Guide

Robotic Vacuum Cleaner eX

300

Mop Plate

Adapter

■Please be sure to r ead the Safety Preca utions before use.

www.yujinrobotusa.

com

User Guide Quick Guide

Part Listing

Antibacterial Filter

Remote Control

(batteries included)

Ultra Microfiber

Wet Mop

● Top

Barrier

Sensor

Bumper

● Bottom

Display Window

Decoration Cover

Dust Bin

Side Brushes

Lithium Ion Battery

Front Wheel

Position

Charging

Terminal

Fixed Pin for Side-Brush

Wheel

Power Switch

Manual

Charging Jack

Front Wheel

Fixed Cover

Front Wheel

Mop Plate

Main Brush

Cover

Main Brush

Main Brush

Fixing Clip

5

● Charging Station

Anti-Slip

Pad

● Dust Bin

Charging Display

Infrared Generator

Antibacterial Filter

Filter case

Dust Bin

Dust Bin

Blade

Charging Terminal

● Remote Control

Power Button

OPEN

Time

Setting

Button

Base

Button

Start/Stop

Button

Direction

Button

● Display Screen

Automatic Cleaning Mode Indication Climb Mode Indication

AUTO

15 30 90 Max Spot Mode

Button

Climb Mode

Button

Climb Mode

Setting Button

Time Setting

Button

Start/Stop

Button

Battery

Status

6

Remote control operation

1. Press Start/Stop ( ) Button of the Remote Control to start cleaning.

2. Press Start/Stop ( ) Button or Power Button to stop cleaning

3. Operating Spot mode ( ) is only available by Remote Control

4. When Base Button ( ) of Remote Control is pressed during cleaning cycle, POP will return to

Charging Station, and charging will start automatically

5. By pressing the Power Button ( ) of Remote Control, the display window will be turned off.

Details For optimized cleaning

Please follow the instructions below for high cleaning efficiency.

Empty the dust bin after each use of the robot cleaner.

- Remove all the non-fixed objects such as toys, magazines or shoes before cleaning.

- Please do not lift or manually move the robot cleaner when the robot is operating.

- Make sure to charge for at least 1 hour before using for the first time.

(Refer to P.9 How to charge manually)

Operating principles of robot cleaner

Principles of operation eX300 operating under Random and Spot cleaning mode will recognize obstacles through various sensors. Utilizing 20 detection sensor, the robot cleaner avoids walls, furniture and other objects.

It climbs a doorsill of up to 0.79 inches and the floor sensors help it avoid falling down stairs.

Be careful that pets or children do not force the robot to fall by playing with it.

Suction of robot cleaner

This product has a main brush, side-brushes and a vacuum suction duct. The dust on the floor is gathered by the rotating side brush, and is swept into the dust bin by the rotating main brush.

7

8

Pre operation check list

Assemble side brush

1. After turning over the robot vacuum, check the position

of the side brush.

2. Match the groove of the side brush to the fixed pin embedded

in a hollow opening of the backside of robot cleaner.

Insert remote control battery

OPEN

There are no batteries inside the remote control at the time of purchase. Install 2 x AAA batteries before using the remote contol.

1. Push the cover of the backside of the remote control

downward to open.

2. Check (+)(-) of the batteries and install.

3. Match the cover to the groove, and close until“click”sounds.

Assemble ultra microfiber mop

Ultra Microfiber

Mop

1

Mop Plate

2

1. Turn over the robot vacuum, and install the Mop Plate by combining it to the fixing

part of the main body.

2. If Mopping Mode is not used, separate and keep the Mop Plate separate from the Main Body.

Pre cleaning check list

Installation of charging station

1

4

2 3

※How to connect adapter

Open the back cover of the Charging Station, and install the adapter with connected power plug as shown in Figure 2 above.

Charging

The battery is not charged at the time of product purchase.

so it must be fully charged before first use.

AUTO

15 30 90 Max

90 Max

1 2 3

1. Turn on the Power Switch on the side of the product.

2. Match the Charging Pin on the bottom of the Main Body with the socket of the Charging Station

correctly, and the robot changes to charing mode.

▶▶ Robot starts to charge with blinking battery status on the display window.

※ Change of the Charging Indicator status on Charging Station

Red: robot cleaner is in operation away from the docking station, or the charging connector

between the cleaner and docking station is not properly connected.

Green Blinking: Recharging (Remaining battery is 40% or less)

Green: Recharge completed (Battery is fully charged or over 40% charged)

3. The battery is fully charged; the battery status on display will be green.

[Auto-charge during use]

※ When the battery is low during an operation, this product automatically moves to the

charging station and performs auto charging.

※ If the base button of the remote control is pressed, it finds and moves to the charging station

and starts charging.

9

10

Operation of robot cleaner

Start/Stop cleaning

● Basic cleaning

1. Press Start/Stop (or Power) button. ( )

2. Press Start/Stop button again. ( )

(the robot is preset for 90 minutes in

normal and starts to work in random.)

ORDER 1 2

Body

AUTO

15 30 90 Max

Start/Stop button Start/Stop button

Remote

Control

Start/Stop button Start/Stop button

● Wet mopping

1. Turn over the robot as shown in the picture.

● Spot mode

Spot (Spiral) cleaning mode, robot spirals in a 5ft radius.

1. Press Start/Stop button. ( )

2. Press spot mode button. ( )

1. Press Start/Stop button. ( )

ORDER

Body

AUTO

15 30 90 Max

1 2 3

※ set up spot mode is only possible

via remote control

Remote control

AUTO

15 30 90 Max

Start/Stop button

Start/Stop button

※ During spot mode operation,

the time indicator light will

blink.

2. Soak Microfiber Wet Mop in water, wring

out and then attach to the Mop Plater.

3. Turn over the cleaning robot body to its

normal position and press the start button

( ) twice.

ORDER

Body

AUTO

15 30 90 Max

1 2 3

Install the wet mop on the body

Start/Stop button

Start/Stop button

Remote

Control

Install the wet mop on the body

Start/Stop button

Start/Stop button

Please deselect climb mode if you wish to use the robot in mopping mode (after installed mop plate on the bottom)

Select Climb Mode Deselect Climb Mode

AUTO

AUTO

15

90

AUTO

15 30 90 Max

※ If not the robot can get hung up

on door sills or other obstacles,

resulting in the robot working

improperly.

● Max mode

In Max mode, robot works until the battery

is exhausted.

1. Press Start/Stop button. ( )

2. Press the time setting button ( ) until

the window

3. Press Start/Stop button. ( )

ORDER

Body

AUTO

15 30 90 Max

1

Start/Stop button

2 3

Max

Set Max mode via time button

Start/Stop button

Remote control

Start/Stop button

Max

Set Max mode via time button

Start/Stop button

● Climb (Carpet) mode

The default climbing height of obstacles

for the robotic vacuum cleaner is up to

approximately 0.2 inches.

If you wish to set the robot to go over

obstacles over 0.2 inches, such as a door

sill, click CLIMB Button to turn on CLIMB

Mode!

: Do not use CLIMB mode on rugs or

carpets.

If you press CLIMB Button of the remote

control, the performance of the climbing

can be increased up to 0.79 inches.

(This performance may vary according

to the environment, such as the structure

of the door sill, etc.)

1. Press Start/Stop Button ( ).

2. Press climb Mode ( ) Button

3. Press Start/Stop Button ( ).

ORDER 1 2 3

Body

AUTO

15 30 90 Max

Start/Stop

Button

Climb Mode

Button

Start/Stop

Button

Remote

Control

Start/Stop

Button

Start/Stop

Button

Set cleaning time

● Set cleaning time

Press Time Button to set cleaning time( ).

Every time you press the button, the time will be changed according to following order

(15 minutes - 30 minutes - 90 minutes - MAX)

Body

AUTO

15 30 90 Max

Set Cleaning

Time

Remote

Control

15 30 90 Max

Movement / Manual cleaning /

Auto-charging

● Manual controlling (moving)

If you want to move cleaning robot to a different area, use the arrow keys on the remote control.

- When you press the backward button,

the cleaning robot will rotate in place and

change directions.

- If you press the direction button when

power is on, it will move but it will not

clean (vacuum).

● Manual cleaning

After you start cleaning, press the direction button on the Remote Control to clean the desired area or direction.

● Auto-charging

The cleaning robot navigates to the Charging

Station and charges automatically when you press the base button on the Remote Control.

※ Display window is activated by pressing

any of the buttons on the Main Body or

by using the Remote Control

11

Emptying dust bin and servicing the antibacterial filter

1. Hold the Dust bin as in the figure and separate

antibacterial filter cover.

2. Clean the filter using cleaning brush.

※ Dust bin can be washed with water.

However, completely dry them before assembling

and using them again.

Cleaning main brush

2. Turn the robot vacuum

cleaner over and place

the bottom facing upright.

,

5. Clean hair, carpet fiber and other substances substances stuck on the main

brush using the cleaning brush. Over time, hairs and fibers accumulate

between the main brush and the bearing. This extra friction which will causes

less efficient cleaning, more battery strain leading to shorter running time and

may ultimately stop the Robot Vacuum Cleaning.

※ Use scissors or a knife along the main brush furrow to remove the hair.

-shape pull it out for the Main Brush for cleaning.

Cleaning side brush

1. Separate the side-brush with both hands.

2. Clean dust and foreign substance using the cleaning

brush.

※ When disassembling the side brush, hold the whole

three-strip brushes together at the same time and

pull it out.

Cleaning sensors

1. Wipe the sensors on the Front Bumper of the robot

cleaner using q-tips.

2. Wipe the sensors on the bottom of the robot cleaner

using q-tips.

Cleaning front wheel

1. Press the front wheel Fix Clip with both hands and lift it up to separate.

2. Remove foreign substance on the front wheel using the cleaning brush.

Click

3. Pull out the front wheel then clean dust and foreign

substances using the cleaning brush. For the main

brush, remove the bearings to be able to easily remove

any hair or other material on the axle.

4. Put the front wheel back in place and reassemble as

shown in the method above.

※ The robot vacuum cleaner may not be working properly if the front and bottom cleaning robot sensors

are covered, for example, by dust, dirt or hair. Cleaning and careful managing are required for all sensors.

13

14

Storage

1. If the vacuum cleaning robot is not used for a long period of time,

turn off the power switch on the side of the main body.

※ Please be aware that the battery could be discharged after an

extended period of non-use.

2. Keep the vacuum cleaning robot away from direct sunlight.

Store the vacuum cleaning robot in a well ventilated location.

※ Please do not store any objects on top of the vacuum cleaning robot as it may cause a malfunction

Battery caution & disposal information

1. Use the lithium-ion batteries for the robot cleaning vacuum.

and alkaline batteries for Remote Control.

2. Install only new batteries of the same type in your product.

3. With the correct polarity, as indicated in the battery compartment,

may shorten the life of the batteries or cause batteries to leak.

4. Do not mix old and new batteries.

5. Do not mix Alkaline, standard (Carbon-Zinc), rechargeable (Nickel Cadmium) or

(Nickel Metal Hydride) batteries.

6. Do not dispose of batteries in fire.

7. Batteries should be recycled or disposed of as per state and local guidelines.

FAQ

If you can not solve the problem with the information below, please contact our Customer Service Center through the website.

Problem Cause

It is not cleaning well.

▶Dust Bin is full.

▶Main Brush is dirty.

▶Filter is contaminated.

Power switch is turned off.

▶Battery is low.

▶Battery is not inserted properly

into the robot cleaner.

▶Main brush is clogged with

hair and dust.

The robot is not responding.

▶Power switch is turned off.

▶Remote Control batteries not

working.

▶Infrared sensor or beam

window of the remote control

are blocked or dirty.

▶Remote control is too close

to the Charging station or

Robot Cleaning Vacuum.

Solution

▶See <Product control & maintenance>

and empty the dust bin.

▶See <Product control & maintenance>

and use main brush.

▶See <Product control & maintenance>

and clean the dirty filter.

▶Re-charge the robot cleaner.

▶See <Product control & maintenance>

and empty the dust bin.

▶See <Product control & maintenance>

and clean the dust bin.

▶Check the power switch on the bottom

of the main body.

▶Re-charge the robot cleaner.

▶Insert the battery of robot cleaner properly.

▶Change the battery of the remote control.

▶Wipe the infrared sensor & beam part of

the remote control with a soft cloth.

The robot is not charging.

▶Charging station or Robot

Vacuum Cleaning is not

connected properly to the plug.

▶Move farther away from the Charging

Station and press the button again while

pointing at the Robot Vacuum Cleaning.

After cleaning, the robot cleaner is not returning to the charging station.

▶Home station or Robot

Vacuum Cleaning is not

connected properly to the plug.

▶Generator & ejector on the

home station and detector of

the robot cleaner is dirty.

▶Connect the power of the Charging Station

properly.

▶Move the Charging Station. No objects

should be placed within 20 inches left/right

or 5 feet in front of the Charging Station.

This is to enable the robot cleaner to return

to the home station automatically after

cleaning.

15

Noise of the robot cleaner is getting worse.

▶Dust bin is full or filter is dirty.

▶Main brush is dirty or hairs

are accumulating between

the main brush and the

bearing.

▶Empty and clean the dust bin.

▶See <Product control & maintenance>

(page 12) and clean the filter.

▶See <Product control & maintenance>

(page 12) and clean the main brush.

16

Display check message

AUTO

15 30 90 Max

※ During operation, if the window icons are blinking, please refer

to the Checklist below before proceeding.

※ Clean the sensors and emptying the dust bin are required at least

once every two weeks. Periodic management will

extend the life of the cleaning robot.

Check display

AUTO + 15

AUTO + 30

AUTO + 90

AUTO + Max

Cause

A wheel is lifted, or the floor could not be detected

Wheel motor overload

Side brush overload

Main brush or suction motor overload

Solution

Move the robot cleaner to flat area in case the wheel is stuck on a threshold.

Check if material such as hair or lint is on the wheel.

Check if material such as hair or lint is on the main brush or side-brush.

Empty the dust bin and clean the main brush and filter

Battery exhausted Please charge