Zalman CNPS14X User's manual
ZALMAN CNPS14X is a high-performance CPU cooler designed for Intel and AMD processors, offering efficient heat dissipation and quiet operation. Its 140mm fan delivers airflow of 17~21dBA, while the pure copper and aluminum construction ensures excellent heat transfer. With its PWM control mode, the fan speed can be adjusted to optimize cooling performance and noise levels. The cooler supports various Intel and AMD socket types, making it a versatile choice for different system builds.
Advertisement
Advertisement
User's Manual
CNPS14X
Intel
Socket 2011 / 1366 / 1156 / 1155 / 775 CPU
Core i7 Extreme
Core i7
Core i5
Core i3
Core 2 Extreme
Core 2 Quad
Core 2 Duo
Pentium Dual-Core
Pentium D
Pentium 4
Celeron D
AMD Socket FM1 / AM3+ / AM3 / AM2+ / AM2 CPU
Zambezi
Llano
Phenom II
Phenom
Athlon II
Athlon X2
Athlon FX
Athlon
Opteron Dual-Core
Opteron
Sempron
To ensure safe and easy installation, please read the following precautions.
www.ZALMAN.com
Ver 1.0
1. Precautions
1) Avoid inserting objects or hands into the fan while it is in operation to prevent
product damage and injuries.
2) Do not ingest the Thermal Grease, and avoid its contact with skin and eyes.
If contact is made with skin, wash off with water. If ingested or irritation
persists, seek medical attention.
3) To prevent possible injuries, gloves must be worn while handling this product.
4) Excessive force exerted on the fan may cause damage to the fan and/or system.
5) Use and keep the product away from reach of children.
6) Check the components list and condition of the product before installation.
If any problem is found, contact the retailer to obtain a replacement.
7) Zalman Tech Co., Ltd. is not responsible for any damaged due to overclocking.
8) During transportation of the system, the cooler must be removed.
Zalman is not responsible for any damages that occur during the transport of
a system.
9) Product design and specifications may be revised to improve quality and performance.
Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including but not limited to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation, or improper testing.
2. Specifications
Model
Spec.
Material
CNPS14X
Pure Copper and Aluminum
Weight 875g
Dimensions 140(L) x 126(W) x 159.3(H) ㎜
Bearing-Type
RPM
FAN
Noise Level
Long Life Bearing
950 ~ 1,350rpm ±10%
17 ~ 21dBA ±10%
Voltage 12V
Contents
Thermal Grease
[ZM-STG2M]
Temperature Range
1g
-40°C ~ +150°C (-40℉ ~ +302℉)
WWW.ZALMAN.COM
1
3. Components
Manual
Backplate Manual Cooler
Nuts Clip A Clip B
(Optional Fan)
Side Caps Silver Bolts A(4mm)
(Socket 2011)
Silver Bolts B(3mm)
(Socket 1366/1156/1155/775/AMD)
Loading Block Double-sided Tape
Thermal Grease
(ZM-STG2M)
WWW.ZALMAN.COM
Spanner
2
4. Installation Requirements
1) Space Requirements
The cooler’s installation requires an unobstructed space of 140mm(length),
126mm(width), and 160mm(height), with the CPU as a central reference point. Please check if components such as ODDs and PSU protrude into the required space.
2) Air Guide Removal
Air guides on enclosures must be removed before the cooler’s installation since they protrude into the cooler’s required space.
160 mm
126 mm
140 mm Air Guides
Case Cover
3) Cooler Orientation
Install the cooler’s fan bracket close to the rear fan of the case, so that the air passing through the cooler comes out through the rear fan of the case,as shown in the image.
Case Exhaust Rear Fan
Fan Bracket
WWW.ZALMAN.COM
MotherBoard
3
5. Installation
A. Clip A Installation
※ Install the clip A according to a user socket as shown in the image.
- Slightly loosen the bolts, insert the clip A between the cover and the base,
and then fasten it with the bolt.
Intel Socket Clip A Installation AMD Socket Clip A Installation
A B
Caution
Please note that the connection directions of the clip A are different according to sockets.
A
Intel Socket
Installation
B
AMD Socket
Installation
Caution
Make sure that the holes of the clip A are attached to the raised parts of the base cover.
Align
WWW.ZALMAN.COM
4
B. Nuts and Side Caps
※ Intel Socket 2011 Installation does not require the Nuts and Side caps.
Intel Socket 1366/1156/1155/775 AMD Socket FM1/AM3+/AM3/AM2+/AM2
- Install Bolts to the Backplate according to
the Socket Type and secure with Side Caps.
- Install Bolts to the Backplate according to
the Socket Type and secure with Side Caps.
2
1
2
1
AMD Socket
Intel Socket 775
Intel Socket 1156/1155
Intel Socket 1366
Caution Caution
[AMD Socket]
Please note the insertion directions of
[Intel Socket]
Please note the insertion directions of the nut and side cap the nut and side cap O O
X X
WWW.ZALMAN.COM
5
C. Double-sided Tape and Loading Block Installation
※ Intel Socket 2011 Installation does not require the Double-sided Tape and Loading Block.
※ Intel Socket 1366/1156/1155 Installation does not require the Loading Block.
Intel Socket 1366/1156/1155
AMD Socket FM1/AM3+/AM3/AM2+/AM2
Intel Socket 775
- Attach Double-sided Tape to the
center of the Backplate and remove the
Double-sided Tape’s Cover.
① Remove the Sticker Cover from the Lower
Tier of the Loading Block and attach it to
the Backplate.
Double-sided
Tape Loading Block
② Attach Double-sided Tape to the Loading
Block and remove the Double-sided Tape Cover.
Double-sided
Tape
Caution
Please make a note of the orientation of the Loading Block.
WWW.ZALMAN.COM
O X
6
D. Backplate Installation
※ Intel Socket 2011 Installation does not require the Backplate.
Intel Socket 1366/1156/1155/775 AMD Socket FM1/AM3+/AM3/AM2+/AM2
- Align the Backplate’s nuts with
motherboard’s clip support holes, attach it
to the back side of the motherboard.
① Take away the fixed Clip support from
the motherboard.
M/B M/B
② Align the Backplate with motherboard’s
clip support holes, attach it to the back
side of the motherboard
M/B
WWW.ZALMAN.COM
7
E. Cooler Installation
① Apply a suitable amount of the included Thermal Grease on the CPU’s surface.
Intel or AMD CPU
② Place the bolt on the connection position of the clip A, adjust the bolt slightly, and then
fasten it with a Spanner. (Use the designated bolts for each socket.)
AMD Socket
Clip A
Intel Socket 775
Intel Socket 1156/1155
Intel Socket 2011/1366
M/B
Tip
To install easily, place the bolt at the end of the Spanner and align it with the connection position.
Silver Bolt A(4mm)
(Socket 2011)
Silver Bolt B(3mm)
(Socket 1366/1156/1155/775/
AMD)
Caution
When connecting, be careful not to use the wrong size bolt.
The silver bolt A and B are very similar in appearance, thus causing confusion.
Silver Bolt A(4mm)
(Socket 2011)
Silver Bolt B(3mm)
(Socket 1366/1156/1155/775/AMD)
WWW.ZALMAN.COM
8
③ Connect the cooler’s 4-pin connector to the motherboard’s CPU Fan header.
Caution
After installing, be sure to activate the PWM control mode in BIOS on the motherboard.
M/B
F. Optional Fan Installation (Optional)
※ To install an optional fan, you should purchase it separately. Hang the fan clips on
the housing hole of the optional fan and on the grooves at the end of both pins of
the cooler. (You can install a maximum of two 140 mm fans.)
Option Fan(ZM-F4) Clip B
[One Optional Fan]
WWW.ZALMAN.COM
[ Two Optional Fan]
9

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Processor Cooler 14 cm 1350 RPM
- Supported processor sockets: Socket AM2, Socket AM2+, Socket AM3, Socket AM3+, Socket FM1
- 21 dB
- Grey