- Computers & electronics
- Software
- Multimedia software
- Audio editing software
- Avid
- Media Composer
- User manual
- 82 Pages
Avid Media Composer audio editing software ReadMe
Below you will find brief information for Media Composer. It will help you to understand features and use cases of your recently acquired software, such as working with LTC timecode and DNxHD codecs, providing detailed information for managing licensing, hardware and software compatibility, and troubleshooting common issues.
advertisement
Assistant Bot
Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.
Avid® Media Composer v4.0.5
ReadMe
IMPORTANT: Avid periodically makes software updates and Customer Patch
Releases (CPR) available for download on Avid.com at the following location: www.avid.com/support/downloadcenter/index.asp
Please check the above site regularly for information on available downloads for your product.
Important Information
Avid
®
recommends that you read all the information in this ReadMe file thoroughly before installing or using any new software release.
Important: Search the Avid Knowledge Base for the most up-to-date ReadMe file, which contains the latest information that might have become available after the documentation was published.
This document describes compatibility issues with previous releases, software installation instructions, hardware and software requirements, and summary information on system and memory requirements. This document also lists hardware and software limitations.
Contents
2
Extending Your Usable Address Space and Adding RAM for Improved Performance (Windows) . . 74
Symbols and Conventions
ReadMe documents use the following symbols and conventions:
Symbol or Convention Meaning or Action
n c
A note provides important related information, reminders, recommendations, and strong suggestions.
A caution means that a specific action you take could cause harm to your computer or cause you to lose data.
If You Need Help
>
Symbol or Convention Meaning or Action
w
A warning describes an action that could cause you physical harm.
Follow the guidelines in this document or on the unit itself when handling electrical equipment.
This symbol indicates menu commands (and subcommands) in the order you select them. For example, File > Import means to open the
File menu and then select the Import command.
This symbol indicates a single-step procedure. Multiple arrows in a list indicate that you perform one of the actions listed.
Italic font
Courier Bold font
Ctrl+key or mouse action k+key or mouse action
Italic font is used to emphasize certain words and to indicate variables.
Courier Bold font identifies text that you type.
Press and hold the first key while you press the last key or perform the mouse action. For example, k+Option+C or Ctrl+drag.
If You Need Help
If you are having trouble using your Avid product:
1. Retry the action, carefully following the instructions given for that task in this guide. It is especially important to check each step of your workflow.
2. Check this ReadMe file for the latest information that might have become available after the documentation was published. Also check online for the most up-to-date ReadMe because the online version is updated whenever new information becomes available. To view the online ReadMe, select ReadMe from the Help menu, or visit the Knowledge
Base at http://www.avid.com/readme.
3. Check the documentation that came with your Avid application or your hardware for maintenance or hardware-related issues. In addition to the printed documentation supplied with your editing application, the documentation is supplied in PDF format when you install the application. Topics that you print from the Help have limited page layout and formatting features. If you want to print a higher quality version of Help information, Avid recommends that you print all or part of the PDF version of the appropriate Avid manual included in the Online Library for your editing application. To access the Online Library, select Help > Online Library from within your Avid editing application.
4. Visit Avid Online Support at www.avid.com/onlineSupport/. Online support is available
24 hours per day, 7 days per week. Search the Knowledge Base to find answers, to view error messages, to access troubleshooting tips, to download updates, and to read or join online message-board discussions.
3
Changed in v4.0.5
The following have been added to this release.
Adding LTC Out During Preroll
You can add black filler to the beginning of a sequence when performing a digital cut. This generates a preamble of LTC timecode before the actual digital cut begins. This preroll filler is set to 1 second. The filler added to the beginning of the sequence is not written to tape.
This allows outboard hardware, such as a video overlay system, time to synchronize with the sequence time before the start of playback.
An additional option has been added to the Digital Cut tool to select the LTC Out during preroll option.
4
To add LTC Out During Preroll
1. Load your sequence in the Record monitor.
2. Select Output >Digital Cut.
3. Select the LTC out during preroll option.
4. Press the Play Digital Cut button.
Changed in v4.0.5
LTC Output During Digital Scrub (When Using Nitris DX only)
LTC timecode will be output when the blue bar in the record monitor is moved, that is, during “digital scrub.” The LTC value is only output when audio is also output, that is, when
Caps Lock is engaged or the shift key is down. The LTC value output corresponds to the first audio frame played, obeying the Audio Setting “Record Monitor Scrub” value for
“Outgoing” frames. n
Typical outboard hardware will add one frame to LTC values it receives, expecting to display the value on the next frame, so when paused, an “outgoing” value of 1 is normally required to get the outboard hardware to display the expected frame.
Updates to AMA
The following have been added to this version of the editing application.
• Avid supports linking to MPEG-2 HD LongGOP 102 Mbits media with AMA via the
GFCAM AMA plug-in.
• Avid supports linking to GFCAM DVCAM DV 25 411 (NTSC and PAL) and DV 25
420 (PAL) media with AMA.
• Avid supports linking to XDCAM EX DV-AVI media, as well as 1440 x 1080 HD media with AMA. Go to http:/www.avid.com/ama/ to view the XDCAM EX AMA Plug-ins
Release Notes from Sony.
Changes to High-Quality Scaling for Real-Time Decode
This release of your Avid editing application includes changes to the behavior of the
High-Quality Scaling for Real-Time Decode option. This Video Display option affects image quality during playback of mixed-format sequences where material requires resizing.
In previous releases, High-Quality Scaling for Real-Time Decode affected all of the video quality settings, and was off by default. In this release, the option affects only the Full
Quality and Full Quality 10-bit options, and is on by default. As a result, you get the best possible image quality without having to change the default setting.
Because High-Quality Scaling for Real-Time Decode affects playback performance, you might want to turn it off if you are working with complex sequences. In particular, you might notice that a sequence with many video streams that played back successfully in previous releases (because the High-Quality Scaling for Real-Time Decode option was off) does not play back smoothly in this release. You have two alternatives:
• If you do not need to view your sequence at full resolution, you can select either Draft
Quality or Best Performance in the Video Quality menu. These quality settings do not use the High-Quality Scaling for Real-Time Decode option.
5
6
• If you need to view your sequence at full resolution, you can deselect High-Quality
Scaling for Real-Time Decode in the Video Display Settings dialog box.
Support for Macintosh Editor Clients in an Interplay Environment
With this release of the editing application, Macintosh editing applications are now supported in an Avid Interplay Environment. For details see the What’s New for Interplay
Version 2.1 document.
Fixed in v4.0.5
The following have been fixed in this release.
➤
Bug Number: UDevC00134088. Performing a video mixdown on a sequence containing a dissolve transition between two Pan & Zoom effects resulted in an incorrect transition. This has been fixed.
➤
Bug Number: UDevC00131648. When trimming Motion Adapters, the pulldown cadence might not have been accurate. This has been fixed.
➤
Bug Number: UDevC00131861. Detecting 2:3 Pulldown was not always correct for cadences that began with the CD frame. This has been fixed.
➤
Bug Number: UDevC00132052. Applying a Timewarp Pulldown Removal effect resulted in an “ECH: CBDataNotAvailable” error. This has been fixed.
➤
Bug Number: UDevC00132056. You were unable to remove motion adapter effects when the frame rate of the clip matched the sequence. This has been fixed.
➤
Bug Number: UDevC00132071. Mixed Frame rate clips loaded into source monitor did not auto patch to appropriate enabled tracks. This has been fixed.
➤
Bug Number: UDevC00132220. Applying a Progressive template to an effect might have resulted in the output being set to Interlaced. This has been fixed.
➤
Bug Number: UDevC00134173. Performing an Audio Punch In was resulting in a “PMM
_insufficient _media” error. This has been fixed.
➤
Bug Number: UDevC00134205. When performing a consolidation with more than two P2
AMA clips, the application would freeze when the media was being accessed using a
MediaNet ethernet attached client. This has been fixed.
Changed in v4.0.4
➤
Bug Number: UDevC00133885. If you loaded clips from the Interplay Window to the
Source monitor and then loaded filler in the Source monitor, eventually loading filler would fail. This has been fixed.
➤
Bug Number: UDevC00134339. When loading clips that are not referenced by any open bins from the Interplay window to the source monitor and then loading more clips might have resulted in “Can’t delete mob because it is still being referenced” errors. This has been fixed.
➤
Bug Number: UDevC00134338. Loading clips from the Interplay Window into the Source monitor sometimes resulted in bin items disappearing. This has been fixed.
➤
Bug Number: UDevC00133980. When attempting to render a sequence that contained
AudioSuite plugin effects, if you did not have the AudioSuite window open, you would be prompted to either cancel the render so the AudioSuite window could be opened or to bypass the AudioSuite plugin effects. If you chose to bypass, the AudioSuite plugin effects would contain clicking when played back. This has been fixed.
➤
Bug Number: UDevC00133989. Previously, audio levels might have changed after rendering. For example, if you created a sequence with an audio clip, changed the gain level in the Audio Mixer tool and then added an AudioSuite plugin and performed a render, the sequence would be fine. If you then added an Audio EQ effect and rendered, the gain level would be added again. This has been fixed.
➤
Bug Number: UDevC00134699. A 1394 “No Input Signal Present” error on the video track in the capture tool could cause either the Audio tool to fail or audio monitoring issues in the
Audio Punch-In Tool.This has been fixed.
Changed in v4.0.4
The following has changed with this release:
• This release has been qualified with Mac OS
®
X Snow Leopard
®
v10.6.2. c
You cannot perform an upgrade from the Leopard to the Snow Leopard OS. You must perform a clean install of Snow Leopard in order for the editor installer to install properly. See your Apple documentation for information on performing a clean install.
• Audio information. Important information has been added to the audio device compatibility section. For example, Pro Tools v8.0.3 and later does not include support
for the Mbox 1. If you want to use Mbox 1, you should use Pro Tools v8.0.1. See “Audio
Device Compatibility with Avid Editing Applications and Pro Tools” on page 29
and
“Co-Install Supported Configurations” on page 29
for updated information.
7
8
• The ability to activate and deactivate the client monitor display has been included with
this release. See “Activating and Deactivating the Client Monitor Display” on page 8
.
Activating and Deactivating the Client Monitor Display
If your Avid editing system has an Avid input/output hardware device attached and active, you can activate or deactivate the display in your Client monitor at any time. When the display is inactive, video is not visible in the Client monitor for either playback or scrubbing.
Audio playback is not affected by deactivating the Client monitor.
Deactivating the Client monitor might be useful, for example, when you are screening material for clients and you want to make an editing change. You can deactivate the Client monitor display so that the client does not see your editing work while it is in progress, then activate the display to show the finished edit.
The status of the Client monitor display does not persist between working sessions on your
Avid editing application. The Client monitor display is always active when you first start your application.
n
You cannot activate or deactivate the Client monitor display if you are using your Avid editing application in software-only mode. If you do not have an Avid input/output hardware device attached to your system, or if you have a device attached but have switched to software-only mode by using the DNA/1394 button, the Toggle Client Monitor button has a gray monitor icon and is disabled. Clicking the button has no effect.
To enable or disable Client monitor display:
t Click the Toggle Client Monitor button in the Timeline bottom toolbar.
Client monitor display becomes active or inactive.
The Toggle Client Monitor button has a blue monitor icon when the Client monitor is active, and has a black monitor icon with a red diagonal line when the Client monitor is inactive. (If the Toggle Client Monitor button has a gray monitor icon, your application is running in software-only mode and clicking the button has no effect.)
Toggle Client Monitor button: monitor active (left), inactive (center), and button disabled (application in software-only mode).
The Toggle Client Monitor button appears in the Play tab of the Command palette. You can use it in the Command palette, or map it to any available button location or to the keyboard. For more information, see “The Command Palette” in the Help and “Mapping
User-Selectable Buttons” in the Help.
Fixed in v4.0.4
Fixed in v4.0.4
The following have been fixed:
➤
Bug Number: UDevC00132662. After checking a currently ingesting clip into your bin from the Interplay window, and then rechecking it back into Interplay, the next time you clicked on the Interplay window you may have received an “Error Linking Assets: Internal,
Unknown Error Occurred” error. This has been fixed.
➤
Bug Number: UDevC00132197. When you select to “Use marks for segment color correction,” in the Correction and Enable Setting then change to Source segment or Program
Segment and apply a color correction change, the change doesn’t apply to the previously marked IN and OUT section. This has been fixed.
➤
Bug Number: UDevC00132518. You might have experienced a 3 to 8 second capture delay.
This has been fixed.
➤
Bug Number: UDevC00131413. (NewsCutter only) Navigating the Directory panel in the
NRCS tool by typing a letter to jump to a position that corresponds to that letter might cause a runtime error. This has been fixed.
➤
Bug Number: UDevC00132325. Timeline waveforms would redraw randomly and inconsistently. This has been fixed.
➤
Bug Number: UDevC00131906. Previously, you could not check in a bin that had contained XDCAM AMA clips. Even though the AMA clips were deleted, you still received a “Checkin to Interplay of AMA clips not allowed” error message. This has been fixed.
➤
Bug Number: UDevC00129244. Performing a QuickTime Reference export of MPEG media resulted in an “Exception: Structured Exception” on a Windows system, and a “Bus
Error” on a Macintosh system. This has been fixed.
➤
Bug Number: UDevC00133367. Setting the TC Generator Y position to a value greater than 505 caused the application to freeze. This has been fixed.
➤
Bug Number: UDevC00133192. If you adjusted audio levels by adding keyframes, once you checked the sequence into Interplay, when you checked out the sequence, the gain level changes were ignored during playback. This has been fixed.
➤
Bug Number: UDevC00117295. You might have received an “Assertion Failed. Could not initialized Player” error after capturing or importing clips. This was an intermittent error.
This has been fixed.
9
➤
Bug Number: UDevC00132425. If you loaded a subclip from the Interplay window and performed a Match Frame on the subclip, it would be cleared from the Source monitor. This has been fixed.
➤
Bug Number: UDevC00128426. When performing an XDCAM batch import, if you had modified the tape name of the proxy clips, the import would fail. This has been fixed.
➤
Bug Number: UDevC00132391. Simple search from the Avid Interplay window, Interplay
Assist, or iNEWS Instinct had a performance issue that could hang the application and slow down other server activity. This has been fixed.
➤
Bug Number: UDevC00132390. Consolidating media from the editing application on a
StorNext file system resulted in “Stream Size Exceeded” errors. This has been fixed.
➤
Bug Number: UDevC00103884. Standby playback would drift out of sync for playback longer than 30 minutes. This has been fixed.
Fixed in v4.0.3
The following have been fixed:
➤
Bug Number: UDevC00128226. The v190.38 NVIDIA driver has been qualified. This fixes the “Unable to install fonts” error that occurred on WinXP SP3 systems.
➤
Bug Number: UDevC0090818. You might have received an “Exception: FILE_Other” error when exporting AAF to a network shared drive. This has been fixed.
➤
Bug Number: UDevC00128607. Playing back the Timeline when in MultiCamera mode with the DV device attach resulted in an “Exception: ADM_DIO” error. This has been fixed.
➤
Bug Number: UDevC00129441. Using Audio Punch-in to create filler at the beginning of the timeline would sometimes fail with an error. This has been fixed. This has been fixed.
➤
Bug Number: UDevC00130505. Performing a DV capture with the Panasonic AJ-SD755 deck might have resulted in “ADVAudioDev: TransferSample” errors. This has been fixed.
➤
Bug Number: UDevC00131178, UDevC00131974. XDCAM batch imports occasionally failed to accept the correct disk. This has been fixed.
➤
Bug Number: UDevC00130028. Some AAF sequences did not successfully import into the editing application. This has been fixed.
10
Fixed in v4.0.2
➤
Bug Number: UDevC00130757. The Timeline would freeze for approximately 5 to 10 seconds when performing an audio scrub. This has been fixed.
➤
Bug Number: UDevC00130658. After canceling a sequence export and returning to the
Timeline or Source/Record monitors, you might have received a “Core_unable_to_do” error.
This has been fixed.
➤
Bug Number: UDevC00129841. When performing a checkin from the editing application to Interplay, reference assets were not always checked in. This has been fixed.
➤
Bug Number: UDevC00105760. Media appeared as offline when sending to playback.
This occurred when a P2 clip was placed in the Timeline after an in-progress clip. This has been fixed.
➤
Bug Number: UDevC00128958. When working in Segment mode, when moving a long GOP format clip to a new location, there was a delay in updating the sequence. This has been fixed.
➤
Bug Number: UDevC00129064. Media received during a transfer while the Audio Punch
In tool was recording to the Timeline, appeared offline in the Transfer Bin. This has been fixed.
➤
Bug Number: UDevC00129581. Channel rotations might have occurred when performing
HD SDI audio capture on the Symphony Nitris. This has been fixed.
➤
Bug Number: UDevC00129784. If you made a change to a User setting and then closed the project, the User setting change would not stick. This has been fixed.
➤
Bug Number: UDevC00129809. The clip gain in the Audio Mixer tool displayed incorrect gain values when Command 8 was attached. This has been fixed.
Fixed in v4.0.2
The following have been fixed:
➤
Bug Number: . In the v4.0 and v8.0 editing application release, choosing the trial version of software activation on systems using a dongle would deactivate the dongle if you subsequently chose to activate using the dongle. This has been fixed. Choosing the trial option for systems with a dongle will no longer deactivate the dongle once you select the dongle option.
11
➤
Bug Number: UDevC00130743. When “Show four-frame display” was enabled, and
“Dynamic relink” was enabled and you dragged clips in Segment mode, you would receive
C++ exceptions. This has been fixed.
➤
Bug Number: UDevC00125435. When performing an Edit while Capture, if you checked the clip out of the editor bin and loaded the clip once the ingest was completed, you would receive an “OBSERVE : ERROR Audio::PMM_INSUFFICIENT_MEDIA Player version of frame duration is longer than actual” error. This has been fixed.
Changed in v4.0.1
No documented changes. This was a limited release.
Before You Install the Editing Application
Read through the following procedures prior to installing the editing application.
Existing Editor Upgrades
Use the following information to determine which editing applications can be installed on your system. The following existing editing applications can be upgraded to the following listed versions:
• Media Composer versions v2.7.x and higher can upgrade to Media Composer v3.x and higher (on Windows
®
XP OS).
• Symphony™ Nitris
®
versions v1.7.x and higher can upgrade to Symphony Nitris v3.x and higher (on WinXP OS). If you are an Avid DS Nitris and Avid Symphony Nitris
Dual Boot customer, you cannot upgrade to Symphony v3.0 and higher.
• NewsCutter XP and NewsCutter Adrenaline versions v6.7.x and higher can upgrade to
NewsCutter v7.x and higher (on Windows XP OS).
If you are a new customer (never installed an Avid editor on your system) you can install the following on an approved WinXP system or an approved Windows
®
Vista system:
• Media Composer v4.0 and higher
• Symphony Nitris v4.0 and higher
• NewsCutter v8.0 and higher
The following upgrade process to the Windows Vista version of the editing application is not supported:
12
Before You Install the Editing Application
For example, if a Media Composer v2.7.x customer uninstalled the editing application, upgraded the OS from WinXP to Windows Vista, and then tried to install Media Composer
3.x or higher, the installation would fail. The only allowable Windows Vista editing application installation is on a clean Windows Vista system.
The Macintosh
®
version of the Media Composer v3.x and higher release can only be installed on a clean Macintosh with Mac OS
®
X Leopard or Snow Leopard.
Notes on Windows Vista OS
Note the following topics if you are running the editing application on the Windows Vista
OS.
Disabling Desktop Compositing
If you are running an editing application on the Windows Vista OS, when the Avid editor is launched you might see a dialog box asking you to disable desktop compositing. You can disable it without adversely affecting the Avid editing application.
You can choose to disable it and continue with your editing session. The dialog will appear once you relaunch the application unless you disable the option.
To disable the desktop compositing:
1. Access the Control Panel.
2. Double-click System.
3. Click Change Settings.
4. Click the Advanced tab.
5. Under the Performance area, click Settings.
6. Uncheck “Enable desktop composition.”
The dialog box requesting you to disable desktop compositing does not appear the next time you launch the editing application.
User Access Control Setting
Windows Vista includes User Access Control (UAC), which makes you aware of changes that will be made to your computer letting you decide to allow the changes or not. Avid recommends that you leave UAC ON. This feature is turned on by default in the Windows
Vista operating system.
13
Standard User
You need to first install the editing application as an Administrator. If you are in a Shared
Storage environment, mount your workspaces as an Administrator. You may then log off and log back in as a Standard user, if necessary.
Windows Vista Windows Sidebar
If the Vista Windows Sidebar is enabled, you might see flickering on the Timeline monitor when you stop playback. You should disable Windows Sidebar:
To disable the Windows Vista Sidebar:
1. Right-click the Sidebar or Sidebar icon, and select Properties.
2. Deselect “Start Sidebar when Windows starts.”
3. Right-click the icon, and select Exit to close the sidebar.
New Folder Structure
Some editing application folders have moved to a new location that is now shared and visible to the user on installation. These folders are created at installation time and are given special permissions to work for all users.
The following folders are created on your Windows XP system in the following location:
C:/Documents and Settings/AllUsers/Shared Documents/<AvidProductName>
• Avid Attic
• Avid Users
• Avid Media_Files
• Avid Templates
• Settings
• Avid FatalErrorReports
• sharedjvm/server/apps/MediaIndexer/stat/log
• MarqueeTitles
• AVX Plug-Ins Data
The following folders are created on your Windows Vista system in the following location:
C:/Users/Public/Public Documents/<AvidProductName>
• Avid Attic
14
Installing the Software
• Avid Users
• Avid Media_Files
• Avid Templates
• Settings
• Avid FatalErrorReports
• sharedjvm/server/apps/MediaIndexer/stat/log
• MarqueeTitles
• AVX Plug-Ins Data
Cleaning up Old Folders Before Installation
Do the following to clean up old folders before you install the new ones if you are performing an upgrade from a version prior to Media Composer 3.0.
To clean up folders:
1. Before installing Media Composer 4.0.x, you need to uninstall your old version and any version of FilmScribe, EDL Manager, MediaLog, and Avid Log Exchange.
2. Remove the following Registry keys on your system if they still exist after the uninstallation process.
HKLM/Software/Avid Technology/<productname>
HKLM/Software/Avid Technology/AVX Plug-ins
3. From the following folders, remove any folders that do not have custom data in them that you want to keep. If you do have custom data, copy the data to the new locations after step 4.
C:/Documents and Settings/AllUsers/ApplicationData/Avid/<productname>
C:/Program Files/Avid/<ProductName>
(Windows Vista) C:/ProgramData/Avid/<Productname>
4. Install the new Avid editing application.
Installing the Software
Prior to installing the editing application, you should uninstall Digi Drivers using
Add/Remove from the Control Panel. Reboot the system and then install the new editing application. If you do not remove the Digi Drivers, the Audiosuite plug-ins do not load and you might receive either the error message “This software requires installation of device
15
16 driver TPkd and a reboot before running” or a “DAE Interface NOT Available” error message. If you see these errors on a clean installation on a brand new system, install Hot fix
KB926255 from Windows Update to fix the problem.
(Macintosh Only) If you are upgrading from a previous version of the Macintosh editing application, remove the Stereo Mixer.dpm and Surround Mixer.dpm plug-ins from the following location: Macintosh HD/Library/Application Support/Digidesign/Plug-Ins. If you do not remove these files, you might experience problems with the AudioSuite Tool.
For all Avid editing applications, you must first log in as the Administrator (not just a user with administrator privileges), install the application, and initially launch the application as the Administrator. If you are working in a shared storage environment, mount your workspaces. You may then subsequently run the Avid editing application as a regular User.
If you are updating from a previous release, you should first uninstall the existing editing application.
(Windows) To uninstall the Avid editing application software do one of the following:
t Using the Add/Remove program, remove the editing application.
t During the installation process, when prompted, choose to uninstall the editing application.
(Windows) To install the Avid editing application software:
1. Quit all active applications.
2. Insert the editing application DVD.
3. Click to Install the Avid Editor Suite or Individual Product and follow the on screen instructions.
n
If the FilesInUse dialog box appears, you can safely select Ignore and continue.
n
Depending on Windows activity on your system, some Microsoft Windows Driver Warnings might be minimized into your task bar at installation time. If your installation is taking longer than 5-10 minutes, please check your task bar for an icon with the word SOFTWARE in it. Click the icon and you may safely select Continue Anyway to continue your installation.
4. When prompted, select “Yes, restart my computer.”
(Macintosh) To uninstall the Avid Editing application software:
1. Quit all applications.
2. Go to Applications/Avid_Uninstaller/AvidEditingApplication
3. Double-click the AvidEditingApplication uninstaller.
Firmware Update Note
4. Follow the on-screen prompts.
(Macintosh) To install the Avid Editing application software:
1. Quit all applications.
2. Insert the editing application DVD.
3. Click to Install the Avid Editor Suite or Individual Product and follow the on screen instructions.
4. When prompted, select “Yes, restart my computer.”
Firmware Update Note
When you first start your editing application after installing, you might receive a dialog box requiring you to update the Avid hardware firmware. Choose to Update. During the update process, do not access any other applications or move any of the active windows. Accessing another application might result in the update completion dialog box being hidden. If this happens, you will see the update progress stay at 100% but have no option to proceed. The hidden window which states the update is complete and prompts you to shutdown, cannot be brought to the foreground. Shutdown the system. Do not just Restart. You must choose to fully Shutdown and then power up your system again.
Notes on Software Licensing
Activating Your Avid Editing Application
Avid has modified the options you have when activating the license for your editing application. The licensing options provide you with more flexibility when activating your software.
• You can run a fully-featured trial version of your Avid editing application for 30 days.
Previously, the trial period lasted for 14 days.
• You can activate your application using an application key (dongle). In the previous release, this option was available only to qualified upgrade customers.
You activate your software using the Avid Activation tool, which opens when you first start your application. For more information on activating your software, see the Installation
Guide for Avid Editing Applications.
n
You cannot activate your software using the Avid License Service. This feature will be supported in a future release.
17
If You Upgrade Your Operating System
If you need to upgrade your operating system after you install your Avid editing application, first deactivate your software. After you upgrade your operating system and, if required, reinstall your application, you can reactivate your software. For information on activating and deactivating your software license, see the Installation Guide for Avid Editing
Applications.
Laptop Network Settings
Your software license uses information from your system’s network configuration. Some laptops disable the Network Interface Card (NIC) when connecting to the Internet through a wireless network connection. If you run your Avid editing application on a laptop, be sure that your NIC and wireless configuration is always the same as when you originally activated your software. See the user assistance for your computer for information on changing network settings.
Using the GetLicenseInfo Utility
Avid provides a utility program — GetLicenseInfo.exe — that retrieves information specific to your license. This is useful if you no longer have the original license information or if you need to provide this information to Avid Customer Support. The license information retrieved by the utility depends on your system, but it can include the following:
• Avid editing product name
• License type
• Status
• System ID
• Serial number (for security reasons, only part of the serial number is displayed)
• Avid machine ID
To retrieve license information:
1. Navigate to one of the following locations: t (Windows) Program Files\Avid\Utilities\GetLicenseInfo t (Macintosh) Applications/Utilities/Avid Utilities/GetLicenseInfo
2. Double-click GetLicenseInfo.exe
A terminal window opens and displays your license information.
3. Copy the appropriate license information, and then close the terminal window.
18
Codec Update
Codec Update
The release of Avid Media Composer v4..0.x includes improvements to Avid’s DNxHD codec to bring it into compliance with the SMPTE VC-3 specification. With this release, the editing application continues to decode any DNxHD media created by a previous version of the editing application. However, previous versions of the editing application are not able to playback media created with the new release. All prior Avid editing versions will need the updated codec's. Codecs are available for editing applications v3.x and above.
If you don't install the newer Avid codecs, the following occurs: When you play compliant
DNxHD media in a previous editor application, it may result in frames being decompressed incorrectly. This is characterized by only the top half of a frame being decompressed with the bottom half of the image displaying with either black or green. If you install the updated codec in these earlier editor application, it will correct the decoding. Avid has included two updated codec files that you can copy to your previous versions (3.x, 7.x and above) of the editing application that allow you to play media that you created with your new editing application.
n
The changes affect only DNxHD 1080i/59.94 and DNxHD 1080i/50 formats. All progressive formats, for example, 720p and 1080p are unaffected.
Installing Updated Codec Files
Copy the updated codec files from the Avid Media Composer v4..0.x and place them in the appropriate folder of the earlier version (3.x, 7.x and above) editing application.
To update to the latest codec files:
1. Make sure the editing application is not running.
2. Go to the following location in the Avid Media Composer v4..0.x application.
(Macintosh) Right-click the editing application executable. Select Show Package
Contents > Contents > SharedSupport > AVX2_Plug-Ins > Codecs
(Windows) Program Files > Avid > Avid Editing Application > AVX2_Plug-Ins >
Codecs
3. Copy the following files:
CodecManager.avx
CMAvidHDCodec.avx
4. Access the previous version editing application.
5. Paste the two files in the following location.
19
(Macintosh) Right-click the editing application executable. Select Show Package
Contents > Contents > SharedSupport > AVX2_Plug-Ins > Codecs
(Windows) Program Files > Avid > Avid Editing Application > AVX2_Plug-Ins >
Codecs
6. Restart the editing application.
n
The previous version of the editing application must also have the latest Avid QuickTime codecs (v2.1). The Avid QuickTime codecs executable is supplied with the latest editor installer. Run the AvidCodecsLESetup.exe (Windows) or AvidCodecsLE.pkg (Macintosh) on any editor system that will be playing back new media.
Supported Hardware and Operating Systems
The following tables provide the information on supported Windows and Macintosh hardware. The following tables also list the supported Operating Systems. Depending upon your hardware the supported Operating Systems are:
• Windows XP 32 (SP2 and SP3)
• Windows Vista 32 (SP1 and SP2)
• Windows Vista 64 (SP1 and SP2)
• Macintosh Leopard 10.5.7 and 10.5.8 and Snow Leopard 10.6.2
Supported PC Workstations with Avid Media Composer
The following PC Workstations are supported with Avid Media Composer v4.x.
Supported PC
Hardware
HP z800 Dual Quad
Core, 2.93 GHz
Graphics Card Supported OS
NVIDIA Quadro
FX 4800
Windows XP 32
Windows Vista 64
Supported with
Software Only
Adrenaline (See
Nitris DX
Mojo DX
Mojo SDI (See
)
20
Supported PC
Hardware
HP z400 Single Quad
Core, 2.93 GHz
Graphics Card Supported OS
NVIDIA Quadro
FXWindows 3800
Windows XP 32
Windows Vista 64
Dell T5500 Dual,
2.93GHz Quad Core
Dell T3500 Single
Quad Core, 2.93GHz
Dell™ T5400 Dual
Quad Core, 2.50 to 3.16
GHz
Dell T3400 Core 2 Duo,
2.33 or 2.66GHz
HP xw8600
NVIDIA Quadro
FX 4800
NVIDIA Quadro
FX 3800
NVIDIA Quadro
FX 3700
NVIDIA Quadro
FX 3700 or
NVIDIA Quadro
FX 570
NVIDIA Quadro
FX 3700
Windows Vista 64
Windows Vista 64
Windows XP 32
Windows Vista 64
Windows XP 32
Windows Vista 64
Windows XP 32
Windows Vista 64
Supported Hardware and Operating Systems
Supported with
Software Only
Adrenaline (See
Nitris DX
Mojo DX
Mojo SDI (See
)
Software Only
Nitris DX
Mojo DX
Mojo SDI (requires additonal
1394b card - StarTech
PEX1394B3)
Software Only
Nitris DX
Mojo DX
Mojo SDI (requires additonal
1394b card - StarTech
PEX1394B3)
Software Only
Adrenaline
Nitris DX
Mojo DX
Mojo SDI
Mojo
Software Only
Adrenaline
Mojo DX
Mojo SDI
Mojo
Software Only
Nitris DX
Mojo DX
Adrenaline
Mojo SDI
Mojo
21
Supported PC
Hardware Graphics Card Supported OS
HP xw8400 Dual Quad
Core, 2.33, 2.66, or
3.0MHz
NVIDIA Quadro
FX 1500 or
NVIDIA Quadro
FX 3500 or
NVIDA Quadro
FX 3700
Windows XP 32
Windows Vista 64
HP xw8400 Dual Dual
Core, 2.66 3.0MHz
NVIDIA Quadro
FX 1500 and
NVIDIA Quadro
FX 3500 and
Quadro FX 3700
Windows XP 32
Windows Vista 64
Supported with
Software Only
Nitris DX
Mojo DX
Adrenaline
Mojo SDI
Mojo
Software Only
Nitris DX
Mojo DX (no DNxHD capture)
Adrenaline
Mojo SDI
Mojo
Software Only
Adrenaline
Mojo SDI
Mojo
HP xw8200 Dual 3.4 or
3.66 GHz xeon
NVIDIA Quadro
FX1300 or
FX1400
If you use the
FX1300 card, use the 169.47 driver.
Windows XP 32
HP xw4600 Core 2 Duo
3.0 GHz
NVIDIA Quadro
FX570
Windows XP 32
Windows Vista 32,
Windows Vista 64
Software Only
Adrenaline
Mojo DX (no DNxHD capture)
Mojo SDI
Mojo
Supported PC Notebooks for Avid Media Composer
The following PC Notebooks are supported with Avid Media Composer v4.x. DNxHD capture is not possible on a notebook.
Supported PC
Notebooks
HP 8730w Core 2 Duo
2.53, 3.06 GHz
Graphics Cards Supported OS Supported With
NVIDIA FX 2700m and NVIDA FX
3700m
Windows XP 32
Windows Vista 32
Software Only
Mojo DX (no DNxHD capture)
Mojo SDI (requires PCI Express
FW800 add in card)
22
Supported Hardware and Operating Systems
Supported PC
Notebooks Graphics Cards Supported OS Supported With
HP 8530w Core 2 Duo
2.53, 3.06 GHz
Dell 6400 Core 2 Duo
2.53, 3.06 GHz
NVIDA FX 770m Windows XP 32
Windows Vista 32
Software Only
Mojo DX (no DNxHD capture)
Mojo SDI (requires PCI Express
FW800 add in card)
NVIDIA FX 2700m and NVIDA FX
3700m
Windows XP 32
Windows Vista 32
Software Only
Mojo DX (no DNxHD capture)
Mojo SDI (requires PCI Express
FW800 add in card)
HP 8510 with docking station
Core 2 Duo
2.2GHz
NVIDIA Quadro FX
570M
Windows XP 32
Windows Vista 32
Software Only
Mojo DX (no DNxHD capture)
Mojo SDI
Mojo
HP 8710W Intel® Core™ 2
Duo processor T7700 2.40
GHz with docking station.
NVIDIA Quadro FX
1600m
Windows XP 32
Windows Vista 32
Software Only
Mojo DX (no DNxHD capture)
Mojo SDI
Mojo
Dell 6300 Intel Core 2 Duo processor T7700 2.4 GHz
NVIDIA Quadro FX
1600m
Windows XP 32
Windows Vista 32
Software Only
Mojo DX (no DNxHD capture)
Mojo SDI
Mojo
HP nw9440 2.16 GHz Intel
Core Duo
NVIDIA Quadro FX
1500M
Windows XP 32 Software Only
Mojo DX (no DNxHD capture)
Mojo SDI
Mojo
IBM T61P Intel Core 2 Duo
T77002.4 GHz 800 Mhz
NVIDIA Quadro
FX570M
NVIDIA Quadro
FX350M
Windows XP 32 Software Only
Mojo SDI
Mojo
Windows XP 32 Software Only Dell Precision M65 Intel
Core Duo or Core 2 Duo processor 2.16 GHz
Dell Precision M90 Intel
Core Duo processor 2.16
GHz
NVIDIA Quadro FX
2500M / 1500M
Windows XP 32 Software Only
Mojo SDI
Mojo
23
Supported Macintosh Workstations for Avid Media Composer
The following Macintosh Workstations are supported with the Avid Media Composer v4.x.
Supported
Macintosh
Hardware Graphics Cards Supported OS Supported With
Mac Pro “Nehalem”
Dual 2.66 GH Quad
Core Intel Xeon or Dual
2.93 GHz Quad Core
Intel Xeon
NVIDIA GeForce GT
120
Snow Leopard v10.6.2
Leopard v10.5.7 and v10.5.8
Software Only
Nitris DX
Adrenaline
Mojo DX
Mojo SDI
Mojo
Software Only Mac Pro “Nehalem”
Dual 2.26 GHz Quad
Core Intel
Mac Pro “Harpertown”
Dual Quad Core 3.0 or
3.2 GHz
Mac Pro Dual
Quad-Core 3GHz or higher Intel processor
Mac Pro Dual
Dual-Core 2.66 GHz or higher Intel processor iMac 20” Display
2.66 GHz 4 GB RAM
NVIDIA GeForce GT
120
Snow Leopard v10.6.2
Leopard v10.5.7 and v10.5.8
NVIDIA GeForce
8800GT
NVIDIA GeForce
7300 GT
NVIDIA GeForce
7300 GT
GeForce 9400
Snow Leopard v10.6.2
Leopard v10.5.7 and v10.5.8
Snow Leopard v10.6.2
Leopard v10.5.7 and v10.5.8
Snow Leopard v10.6.2
Leopard v10.5.7 and v10.5.8
Software Only
Nitris DX
Adrenaline
Mojo DX
Mojo SDI
Mojo
Software Only
Nitris DX
Adrenaline
Mojo DX
Mojo SDI
Mojo
Software Only
Nitris DX
Adrenaline
Mojo DX (no DNxHD capture)
Mojo SDI
Mojo
LSnow Leopard v10.6.2 eopard v10.5.7 and v10.5.8
Software Only
24
Required Hotfix Info
Supported Macintosh Notebooks for Media Composer
The following Macintosh notebooks are supported with the current editing applications.
DNxHD capture is not supported on notebooks. DNxHD capture is not supported on Mojo
DX on Notebooks. Nitris DX is not supported on laptops.
Supported Macintosh
Notebook Graphics Cards Supported OS Supported With
MacBook Pro 2.66 GHz Intel
Core 2 Duo processor, 17” display, 4GB 1066MHz DDR3,
250GB ATA 7200 rpm drive
MacBook Pro 2.53 GHz Intel
Core 2 Duo processor, 15” display, 4GB 1066MHz DDR3,
250GB ATA 7200 rpm drive
NVIDIA GeForce
9400M and 9600M
GT
NVIDIA GeForce
9400M and 9600M
GT
Snow Leopard v10.6.2
Leopard v10.5.7 and v10.5.8
Software Only
Mojo DX(no DNxHD capture)
Mojo SDI
Mojo
Snow Leopard v10.6.2
Leopard v10.5.7 and v10.5.8
Software Only
Mojo DX(no DNxHD capture)
Mojo SDI
Mojo
MacBook Pro 2.5 GHz Intel Core
2 Duo processor, 15” & 17”
Display
MacBook Pro 2.33 GHz Intel
Core 2 Duo processor, 17” or 15” display
Snow Leopard v10.6.2
Leopard v10.5.7 and v10.5.8
Software Only
Mojo DX(no DNxHD capture)
Mojo SDI
Mojo
MacBook Pro 2.4 GHz Intel Core
2 Duo processor, 15” & 17”
Display
NVIDIA GeForce FX
8600m GT graphics with 256MB SDRAM
Snow Leopard v10.6.2
Leopard v10.5.7 and v10.5.8
Software Only
Mojo DX(no DNxHD capture)
Mojo SDI
Mojo
MacBook Pro 2.16 GHz Intel
Core Duo processor, 17” or 15” display
Snow Leopard v10.6.2
Leopard v10.5.7 and v10.5.8
Software Only
Mojo DX(no DNxHD capture)
Mojo SDI
Mojo
Snow Leopard v10.6.2
Leopard v10.5.7 and v10.5.8
Software Only
Mojo DX(no DNxHD capture)
Mojo SDI
Mojo
Required Hotfix Info
If you have an HP z800 or HP z400 system and are running Windows XP 32 OS, you must install a Microsoft WinXP32 SP3 hotfix in order for the supported OHCI card to function properly with Avid DNA hardware. Download the Hotfix from the following location.
http://support.microsoft.com/hotfix/KBHotfix.aspx?kbnum=955408&kbln=en-us
25
The hotfix page indicates that this fix is for SP4. The fix is actually for SP3. It is safe to take this fix for SP3.
Restart your system after running the hotfix.
Compatibility Chart
The following table lists the operating system, NVIDIA
®
driver, QuickTime
®
, Windows
Media™, Avid Interplay
®
, shared storage, Sony
®
XDCAM™, Panasonic
®
P2, and Pro Tools
LE
®
versions that were qualified with the Avid editing applications. Also listed are the third-party applications such as Boris Continuum Complete, Avid DVD by Sonic™,
Sorenson Squeeze
®
, and SmartSound
®
that ship with the editing applications.
Item
Avid Interplay
Support
Versions
QuickTime Support v7.6.4 (Windows and Leopard) v10 X (Snow Leopard)
Windows Media
Version Support
Windows Media Player 11
See the Avid Interplay ReadMe for supported versions.
Comments
Note: QuickTime v10X does not include
QuickTime Pro options.
If you do not have Windows Media Player
11, access the download at www.microsoft.com.
Windows Media export compatibility is subject to Microsoft Windows Media updates.
Macintosh editing applications are not supported in an Avid Interplay environment. IMPORTANT: The Avid
Interplay components that get installed on the editing application must be updated to the Avid Interplay version that is released with the editing application. These include the Media Indexer, Interplay Access,
Interplay Framework, Interplay Transfer
Client and ProEncode Client. The Avid
Interplay Server components can remain on the previous releases listed as supported. For details, see the “Avid
Editing Application Compatibility with
Interplay Releases” topic in the Avid
Interplay ReadMe.
26
Compatibility Chart
Item
NVIDIA Driver
Support
Versions Comments
v190.38
(This is the version of driver tested with our editing applications. DO NOT upgrade to any other version.)
See
“Setting up the NVIDIA Card” on page 33
.
Shared Storage
Support
Pro Tools
Sony XDCAM driver
Avid Unity™ MediaNetwork and
Avid Unity ISIS
®
.
See
“Shared Storage Support” on page 35 .
Pro Tools LE v7.3.1 and v7.4.x
Pro Tools LE v8.0cs1 and higher.
Pro Tools HD v8.0cs1and higher.
For information on supported versions of
Pro Tools in an Interplay environment, see the Avid Interplay ReadMe.
Interoperability is supported with
Pro Tools LE v7.3.1 and v7.4.x; Co-install is not supported with these versions.
With Pro Tools HD v8.0cs1, Media
Composer supports the Video Satellite feature. For more information, see the
Video Satellite Guide provided by
Digidesign®.
With Pro Tools LE v8.0, and HD v8.0 and higher, co-installation of Media Composer
(Windows and Macintosh) and Pro Tools is supported.
See also “Audio Device Compatibility with
Avid Editing Applications and Pro Tools” on page 29
.
WinXP 32 – FAM 2.1, PDZ 2.50
Vista 64 – FAM 2.2, PDZ 2.50
v2.9.0 (XDCAM Transfer for
Macintosh)
Avid recommends you install the Pro Disc
2.04 driver on the Windows XP system running SP3 when using the following
Sony PDW devices:
PDW 1500, PDW HD1500, PDW 700,
PDW 350, PDW F75, PDW F70, PDW D1.
The driver can be downloaded from Sony's website http://esupport.sony.com/.
Avid recommends you install the VFAM driver v2.2 (WinXP 32) or the VFAM 2.1
(Macintosh OS) when using the PDWU1 device. The firmware version is 2.42. The driver can be downloaded from Sony's website http://esupport.sony.com/.
27
Item Versions Comments
Panasonic P2 driver (Windows XP and Vista) Driver version for P2 devices: v2.09
(Macintosh) Driver version for P2 devices: v1.33
There is currently no P2 writeback support for Macintosh clients.
Boris Continuum
Complete v6.0.6
Avid DVD by Sonic v6.1
Sorenson Squeeze
SmartSound
Sonicfire
®
Pro v5.1.1
v5.1.1
Ships with:
Avid Media Composer
Avid NewsCutter
®
Avid Symphony™ Nitris
®
Avid Symphony Nitris DX
Ships with:
Avid Media Composer
Avid NewsCutter
Avid Symphony Nitris
Avid Symphony Nitris DX
Ships with:
Avid Media Composer
Avid NewsCutter
Avid Symphony Nitris
Avid Symphony Nitris DX
Ships with:
Avid Media Composer
Avid NewsCutter
Avid Symphony Nitris
Avid Symphony Nitris DX
Avid FX v5.8
Ships with:
Avid Media Composer
Avid NewsCutter
Avid Symphony Nitris
Avid Symphony Nitris DX
28
Audio Device Compatibility with Avid Editing Applications and Pro Tools
Audio Device Compatibility with Avid Editing
Applications and Pro Tools
When you install Avid editing applications and Pro Tools on the same system, note the following:
• If you install both an Avid editing application and Pro Tools on the same system, the co-install does not support both applications launched simultaneously.
• Co-install of Pro Tools LE with Mbox 2 Pro is not supported with Mojo, Mojo SDI, or
Adrenaline due to IEEE 1394 (FireWire) conflicts.
• Co-install is not qualified with Windows Vista 64.
• To install Pro Tools and an Avid editing application on the same system, install Pro
Tools first and then the editing application.
• When you uninstall Pro Tools, choose to uninstall just the application and not the audio drivers. On a Macintosh Pro Tools system, this is named the “Safe Uninstall.” On a
Windows Pro Tools system, you must select the first uninstall option — “Pro Tools LE
Only” — which is not selected by default.
• Media Composer and Avid NewsCutter were tested with the Mbox 2, and Mbox 2 Mini as valid I/O peripherals. If you uninstall the audio drivers for these devices, the editing application no longer sees the devices.
• If you install Avid editing hardware on your system — Mojo, Mojo SDI, Adrenaline,
Mojo DX, or Nitris DX — the editing application does not recognize any connected
Mbox 2 as audio devices.
• If you run into any issues, uninstall both applications and reinstall Pro Tools first, then your editing application.
• Pro Tools v8.0.3 and later does not include support for the Mbox 1. If you want to use
Mbox 1, you should use Pro Tools v8.0.1 instead.
• Only Media Composer v4.0.4 and Pro Tools v8.0.3 are qualified for co-install with
Mac OS X 10.6.x (Snow Leopard) systems.
Co-Install Supported Configurations
The following table provides a list of supported Avid Media Composer v3.59 and later products with the Pro Tools peripherals.
• Co-install — Indicates that you can install the device on the same system as you install your Avid editing application. For a list of devices supported for audio input/output operations with your Avid editing application, see
29
• Not supported — Indicates that you cannot install the audio device on a supported Avid editing system.
• Not Tested — Indicates that Avid has not tested the device with a supported Avid editing system configuration.
Pro Tools
(Interface)
MC Software
Only
MC with
Mojo
MC with
Mojo SDI
MC with
Adrenaline
MC with
Mojo DX
MC with
Nitris DX
Mbox
(USB 1.1)
Mbox 2
(USB)
Not Supported
Co-install
Mbox 2 Pro
(1394)
Co-install
Not Supported Not Supported Not Supported Not Supported Not Supported
Co-install Co-install Co-install Co-install
Not Supported Not Supported Not Supported Co-install
Co-install
Co-install
Co-install Co-install Co-install Co-install Co-install Mbox 2 Mini
(USB)
Co-install
Mbox 2
Micro (USB)
Co-install
Co-install Digi 002
(1394) b
Digi 003
(1394) a
Co-install
Eleven Rack
(USB)
Not Tested
Pro Tools
HD, in CPU
Co-install
Not Tested Pro Tools
HD, with chassis
Fast Track
Pro (USB)
Co-install
Co-install
Co-install
Co-install
Not Tested
Co-install
Not Tested
Co-install
Co-install
Co-install
Not Tested
Co-install
Not Tested
Not Tested
Co-install
Co-install
Not Tested
Co-install
Not Tested
Co-install
Co-install
Co-install
Not Tested
Co-install
Not Tested
Not tested
Co-install
Co-install
Not Tested
Co-install
Not Tested
Not Supported Not Supported Not Supported Not Supported Not Supported a. Applies to 002 and 003 Rack and Console units, and 003 Rack +. When used with Mojo, Mojo SDI, or Adrenaline, connect the 002 or 003 to an approved 1394 HBA card.
30
Audio Device Supported Configurations
Audio Device Supported Configurations
The following table provides the list of supported Pro Tools audio devices that you can use for input/output operations with Avid Media Composer v3.5.9 and later (MC) and Avid
NewsCutter v7.5.9 and later (NC). It also lists devices used as control surfaces.
• Supported — Indicates that you can use the audio device for input and output operations with your Avid editing application. Some audio devices might not support all input/output functionality.
• Supported (1394 only) — Indicates that you can use the audio device for input and output operations only when you select 1394 in your Avid editing application. For information on using the DNA/1394 button, see “Selecting a DV Device” in the Help.
• Not supported — Indicates that you cannot use the audio device for input/output operations with the Avid editing system.
n
The Command|8 is also supported as a control surface for Avid Symphony.
Pro Tools
(Interface)
MC/NC
Software Only
MC/NC with
Mojo
MC/NC with
Mojo SDI
MC/NC with
Adrenaline
MC/NC with
Mojo DX
MC/NC with
Nitris DX
Audio Devices:
Mbox
(USB 1.1)
Not Supported
Mbox 2
(USB)
Supported
Mbox 2
Mini (USB)
Supported
Not Supported Mbox 2
Micro
(USB) a
Digi 002
(1394) b
Supported
(Windows)
Supported Fast Track
Pro (USB)
Digi 003
(1394)
Not Supported
Eleven Rack
(USB)
Not Supported
Not Supported Not Supported Not Supported Not Supported Not Supported
Supported
(1394 only)
Supported
(1394 only)
Supported
(1394 only)
Not Supported Not Supported
Supported
(1394 only)
Supported
(1394 only)
Supported
(1394 only)
Not Supported Not Supported
Not Supported Not Supported Not Supported Not Supported Not Supported
Supported
(Windows)
Supported
(Windows)
Supported
(Windows)
Not Supported Not Supported
Not Supported Not Supported Not Supported Not Supported Not Supported
Not Supported Not Supported Not Supported Not Supported Not Supported
Not Supported Not Supported Not Supported Not Supported Not Supported
31
Pro Tools
(Interface)
MC/NC
Software Only
MC/NC with
Mojo
MC/NC with
Mojo SDI
MC/NC with
Adrenaline
MC/NC with
Mojo DX
MC/NC with
Nitris DX
Control Surfaces:
Command|8
(USB)
Supported
Digi 002
(1394) b
Supported
(Windows)
Supported
Supported
(Windows)
Supported
Supported
(Windows) a. You can only monitor audio with the Mbox 2 Micro.
Supported
Supported
(Windows)
Supported
Supported
(Windows)
Supported
Supported
(Windows)
Using External Fader Controllers
Your Avid editing application supports the following external fader controllers or mixers for automation gain and pan recording or as control surfaces. Only the Digi 002 (on Windows systems) and the Command|8 can function as control surfaces.
n
External fader controllers or mixers are optional. They are not required for you to perform automation gain or pan recording on an Avid editing system.
•
Digi 002 (Windows only) and Command|8
•
JL Cooper MCS-3000X MIDI automation controller
•
JL Cooper FaderMaster Pro MIDI automation controller
•
Yamaha
®
01V/96 and Yamaha 01V digital mixing console
n
The JL Cooper controllers and Yamaha mixing consoles do not support automation pan recording.
Windows systems with Avid Adrenaline, Avid Mojo, and Avid Mojo SDI input/output hardware can use the Digi 002 as an external audio device. This means you can use the
Digi 002 to play, record, and output audio. This option is not available for systems with Avid
Nitris DX and Avid Mojo DX hardware.
The following table compares the external fader controllers and mixers.
32
Setting up the NVIDIA Card
Feature
Digi 002
(Windows only) Command|8
FaderMaster
Pro MCS-3000X
Yamaha 01V/96 and
Yamaha 01V
Control surface for transport controls and other functions
Yes
Provides audio play, input, and output
Yes
Record automation gain Yes
Record automation pan Yes
Flying faders Yes
Touch-sensitive faders Yes
Solo/mute Yes
Supports audio mixing No b
Latch mode (also known as Snap mode)
Number of steps of fader accuracy
Yes
1024
Yes
No
Yes
Yes
Yes
Yes
Yes
No
Yes
1024
No
No
Yes
No
No
No
Yes
No
No
128
No
No
Yes
No
Yes
Yes
Yes
No
Yes
1024
No
No
Yes
No
Yes
No
Yes a
Yes
No
256 a. For Yamaha fader/controllers, solo works only if you do not use the unit for audio mixing at the same time.
b. The Digi 002 can be used as a standalone audio mixer but not at the same time as it is being used as an automation gain or automation pan controller or control surface.
For more information on using these external fader controllers or mixers, see “Recording
Automation Gain or Automation Pan Information” in the Help.
Setting up the NVIDIA Card
To set up the NVIDIA card, you must make sure you have the correct display driver version, install the display driver if necessary, and set the correct display settings. This version of the editing application requires the following:
Prior to setting up the NVIDIA card, check to make sure you have the correct display driver version. If you do not have the correct NVIDIA driver, you can install it from the Utilities folder that installs with your Avid application.
• Version 190.38
33
Which driver is required depends on the version of the NVIDIA card and the type of operating system (Windows XP Windows Vista 32, Windows Vista 64). Installation files for these drivers are installed in the folder Program Files\Avid\Utilities\nVidia.
To check the NVIDIA display driver version:
1. Right-click the Desktop and select NVIDIA Control Panel. You can also open the
Windows Control Panel and double-click the NVIDIA Control Panel icon.
2. Click System Information at the bottom left corner of the NVIDIA Control Panel.
The version number is listed in the Graphics card information section on the ForceWare version line.
To install the NVIDIA display driver:
1. Navigate to Program Files\Avid \ Utilities \nVidia and double-click the folder that corresponds to your operating system.
2. Double-click the file for the applicable driver.
3. Follow the on-screen instructions, and then restart your system.
To set Dualview mode if you are working with two monitors:
1. Right-click the Desktop, and select Nvidia Control Panel.
2. In the settings window in the left of the window, click Set up multiple displays.
3. In the “Choose View display mode to use” area, select “Configure independently from each other (Dualview).
4. Click Apply, and then click OK.
Disabling the NVIDIA Driver Helper Service
(Windows XP)
The NVIDIA driver Helper Service is a background program that runs with the NVIDIA
Driver installed. This service informs you when an update to the NVIDIA Driver is available. There have been instances where this service causes slow restarts and shutdown with the Avid DNA hardware attached. The service also can prevent the Adobe®
Photoshop® Gamma loader from operating, which causes color correction settings not to work properly. If this occurs, you should disable the NVIDIA Driver Helper Service.
To disable the NVIDIA Driver Helper Service:
1. Right-click My Computer.
2. Click Manage.
3. Double-click Services and Applications.
34
Shared Storage Support
4. Double-click Services.
5. Right-click NVIDIA Display Driver or NVIDIA Driver Helper Service.
6. Click Properties.
7. Select Startup Type > Disable.
8. Click OK.
Every time you update or reload the driver, this service is enabled again.
Shared Storage Support
The editing application has been tested in a shared storage environment with the following:
Editing
Application
Operating
System
ISIS Client supported version
ISIS Server supported version
MediaNetwork
Client supported version
MediaNetwork
Server supported version
Windows XP
Windows Vista
Business 32 and
Windows Vista
Business 64 a v1.6, v1.7, v1.8, v2.0.4, v2.0.5, v2.1.1
v1.6, v1.7, v1.8, v2.0.4, v2.0.5, v2.1.1
v5.1.3
Macintosh
Leopard v10.5.7 and v10.5.8
v1.6, v1.7, v1.8, v2.0.4, v2.0.5, v2.1.1
Macintosh Snow
Leopard v10.6.2
v2.1, v2.1.1
v1.6, v1.7, v1.8, v2.0.4, v2.0.5, v2.1.1
v5.1.3, v5.1.4
v1.7, v1.8, v2.0.5, v2.1.1
v5.2
v4.2.4, v5.1.3
v4.2.4, v5.1.3
v4.2.4, v5.1.3
a. Windows Vista Business 32 is supported on some Avid editing applications. See
“Supported Hardware and Operating Systems” on page 20 .
New in Avid Media Composer v4.0
What’s New
The following features have been added to this release of the editing application.
• Mixing Frame Rates and Field Motion Types
• Stereoscopic update
• Ancillary Data Handling
35
• Video Satellite (supported on the Macintosh)
• 1080p/24 Hi Quality SD/HD Downconvert
• Auto-Zoom for Motion Tracking and Stabilization
• AAF Edit Protocol support
• 720p Proxy Transcode Workflow
• Clip Color Changes
• Commit Multicamera Edits option
• Edgecode support enhancements for Timecode Burn-in effect
• Transition Preservation
• Recapturing and Decomposing
• Support for Ikegami GFCAM™
• Numeric Keypad and Mouse Support for MultiCamera Editing
• Entering Timecode changes
• Undo up to 100 previous actions.
• Support for rendering, transcoding and mixing down AVC-Intra resolutions
• Support for 16 tracks of audio in the Audio Mixer Tool. See
“Documentation Changes” on page 75 .
For information on new features for the Avid editing products, see the What’s New for Avid
Media Composer v4.0. The What’s New is provided in PDF form on the Avid Knowledge
Base. The What’s New is also provided in the online Help.
Limitations and Known Issues
AMA (Avid Media Access)
➤
Bug Number: . AMA and XDCAM Optical Disks: When accessing media through Avid
Media Access (AMA), system response time can be affected due to the high latency of the
XDCAM optical disk. This can affect media access response time while linking, playing back, and scrubbing. When you create sequences with multiple effects or layered tracks,
Avid suggests that you consolidate the media to a local drive instead of working directly from the optical disk to avoid dropped frames and to avoid slow response time.
36
Limitations and Known Issues
➤
Bug Number: . Link to AMA File(s): This menu choice has been created to be used with future third-party AMA file based media plug-ins. To see the available AMA plug-ins available for your Avid editing applications, go to www.avid.com/ama/. This option will be grayed out if you do not have the appropriate plug-in installed on your system.
➤
Bug Number: . AMA and additional XDCAM Metadata columns: Avid supports new
XDCAM ID and Data metadata which displays in the Avid bin columns. The metadata is available from the DISCMETA.XML file. Additional metadata information has also been added when using the Sony PDZ-1 workflow. Depending on the fields you enter information to in Sony's browsing software and on the options you choose in AMA, the metadata information displays in Avid bin columns and as the volume or bin name.
➤
Bug Number: . AMA and JVC: JVC SDHC volumes are not automatically detected and mounted by AMA. Sony's AMA XDCAM-EX plug-in currently detects Sony's SxS folder structure, but does not yet detect the JVC SDHC folder structure. A workaround is to use the
“File > Link to AMA Volume(s)” menu option and then navigate to the
/PRIVATE/JVC/BPAV folder on the SDHC card.
Avid is working with Sony to allow for the AMA XDCAM EX plug-in to automatically detect this folder structure.
➤
Bug Number: . At this time, the Dynamic Relink option is not available with AMA clips.
➤
Bug Number: UDevC00119182. When you use the AMA method, additional metadata column headings disappear when you use custom bin views. There are different scenarios when this issue might occur.
They include: When you use the AMA method to link to media and then switch back to an already existing custom bin view created before using the AMA feature, the additional metadata columns disappear. We've also seen a similar situation if you create a P2 bin and link with AMA. Create a customize bin view. All default columns and additional metadata columns display. If you then create an XDCAM bin and link with AMA, and then create another customized bin view. All default columns and additional metadata columns display as well. When you switch back to the first P2 customized bin view, the additional metadata columns disappear.
Workaround: When using AMA, Avid recommends that you do not create custom bin views. Use the default preset bin views.
➤
Bug Number: UDevC00120470. When linking clips through AMA, the metadata information might be missing when you switch from Brief view to Text view in a new bin.
Workaround: Link the clips through AMA when the bin is in Text, Script, or Frame view.
37
➤
Bug Number: UDevC00120055. The Avid editing system might be slow to respond while mounting multiple workspaces, while in the application, in AMA (Avid Media Access).
Workaround: Mount the multiple workspaces prior to opening the Avid editing application, and then work in AMA.
➤
Bug Number: UDevC00119615. (Macintosh only) Offline clips appear selected
(highlighted yellow) even after you eject a write-protected XDCAM EX (SxS) card.
Workaround: Do not write-protect the card and do not eject the card while the application is running.
➤
Bug Number: UDevC00115894. Playing back XDCAM DV 25 media from a disc might drop or skip audio frames, this could be due to the disc needing time to spin back up.
➤
Bug Number: UDevC00116263. The following folder names: “OMFI MediaFiles,” “Avid
MediaFiles,” “Contents,” “Clip,” and “BPAV” are application or camera generated file names which contain data appropriate media files. To avoid assertion failure errors when mounting volumes, do not create additional folders with these file names on your system.
Audio
➤
Bug Number: UDEV00220668. If your system is an HP xw8400, you must customize the sound configuration in order for the editing application to correctly control the levels of the microphone or other connected audio device:
Workaround:
To customize the sound card configuration:
1. In the Project window, click the Settings tab.
2. Double-click Sound Card Configuration.
3. Ensure that the Record/Input descriptions match the Playback/Output settings. For example, if you have a microphone plugged into the rear pink connector, then the
Playback/Output option should be set to Rear Pink In. If you have a Line input audio device connected to the front black connector, the Playback/Output option should be set to Front Black In.
➤
Bug Number: UDEV00143962. Clip Pan: When you add an audio dissolve between two clips with Clip Pan onto a single audio track, the audio dissolve uses the Clip Pan setting on the outgoing source for the duration of the dissolve.
➤
Bug Number: UDevC00118578. Occasionally, you might receive a “ReadStreamAsyn” error when performing a Digital Audio Scrub. If you continue scrubbing, the audio will come back.
38
Limitations and Known Issues
➤
Bug Number: . Pan Automation (overrides Clip Pan when applied): When you add an audio dissolve between two clips with Automation Pan onto a single audio track, the audio dissolve interpolates the pan values between the pan keyframe value at the beginning of the dissolve and the pan keyframe value at the end of the dissolve. Any pan keyframe that exists in the middle of the dissolve is ignored.
Workaround: Place the two clips on separate tracks using Clip Pan, fade one to silence, and fade the other up from silence.
➤
Bug Number: . The following procedure causes a failure in the audio output: Open a
720p50 HD project, open the Capture tool and select HD-SDI video and Audio input.
Capture an HD Clip from Satellite source using HD-SDI Embedded feature and save it to a
Bin. Create an HD sequence using the above saved HD clip. Configure the Panasonic HD
150, and set the deck to accept HD-SDI audio Embedded. Open the Video output dialog.
Turn on HD-SDI Audio Embedded. Attempting to output an HD sequence (Preview) to an
HD deck using HD-SDI audio Embedded feature completely fails. There is no audio output signal seen on Deck.
➤
Bug Number: UDEV00207753. The Panasonic HD150 deck will not decode the HD embedded audio stream from Adrenaline or Avid Nitris.
Workaround: Connect AES audio from the Avid DNA hardware to the deck and disable the embedded audio.
Audio Punch-In Tool
➤
Bug Number: UDEV00086862. You could monitor input during preroll in previous versions. If you have a software-only system, you can still monitor input during preroll. If you have an Avid Mojo, input monitoring begins at the IN point, not during preroll.
Avid Unity
➤
Bug Number: UDevC00132807. (Macintosh Snow Leopard client) Including a hyphen or underscore in a workspace name causes “END_MEDIA_EDITS_Video FAILED” errors when exporting QuickTime movies.
➤
Bug Number: UDevCC00080420. Avid Unity MediaNetwork and Power User login: If you log into your Windows system as a Power User and use the same login in the Connection
Manager to log onto Avid Unity MediaNetwork, you cannot play media.
39
Workaround: In order to use an Avid editing application in Interplay you must log in as a
Power User. However, do not use the same login when you use the Connection Manager to log onto Avid Unity MediaNetwork. Use a different login for the Connection Manager. This problem does not exist on Avid Unity ISIS.
➤
Bug Number: UDevC00089671. Workspace names in Asian characters might appear truncated at the end in any drive-selection list.
Workaround: Use no more than 5 characters for workspace names.
➤
Bug Number: UDEVC00089275. Changing Users on MediaNetwork Fibre attached clients: When you change users on a fibre attached client, do not use the Switch User function in the Windows Log Off dialog box. When you log back in as the original user you may get the following errors when you play media: “Exception: FILE_OTHER, filename…
Exception: SYS_ERROR, status:1317, msg:The specified user does not exist.”
Workaround: To fix the problem once it occurs, reboot the system. To avoid the problem, before you switch users, log off completely and reboot the system.
Capture
➤
Bug Number: UDevC00126440. A/V passthrough sync is not guaranteed while capturing
HDV material through FireWire devices. The captured media is in sync.
➤
Bug Number: UDevC00117699. When performing captures over FireWire with the
SonyZ7U or Canon XH-G1 camera, you might receive “Lack of progress” errors.
➤
Bug Number: UDevC00094480. If you have problems with batch capture accuracy for footage captured over 1394 due to undetected small timecode breaks, select the “Enable detection of small timecode break” option located in the Capture Settings DV& HDV tab.
➤
Bug Number: UDevC00116442. A 1:1 10-bit capture might fail with
DIG_VDM_OVERRUN or video overrun errors. This might not occur if storage performance is optimized.
➤
Bug Number: UDevC00080115. (Macintosh) You might receive a “Mac Error - 37” error when accessing a target drive or workspace with 28 or more characters.
Workaround: Make sure the target drive or workspace names have fewer than 28 characters.
40
Limitations and Known Issues
➤
Bug Number: UdevC00025851, UdevC00049993. If you capture clips with an Avid editing system on two or more days and use the same project and the same tape name (for example, if you capture on two separate days from a cable feed named “Live”), relinking the clips might cause the old clips to relink to the new clips. Because the clips in this instance are captured on different days but use the same 24-hour timecode and have the same tape name, the Avid system treats the captured material as coming from the same source. When you relink the clips, they relink incorrectly.
Workaround: Avid recommends that you avoid using generic or nondescriptive tape names
— for example, do not use the tape name “Live” for a live feed. Instead, use distinctive tape names for each capture. Also, you can use separate projects when capturing with your editing system. When you change projects, even if you use the same tape name for your captures the Avid system generates new source IDs. This prevents the relink problem.
➤
Bug Number: UDevC26084. If you are working with DV tapes in the Sony HVR-M10U you might experience “failed to find preroll errors.”
Workaround: Change the machine template to the “Generic_DVDevice-NTSC” or
“Generic_DVDevice-PAL” template. This forces the software to use a different method for cueing to the preroll timecode.
➤
Bug Number: UDEV00225379. The editing application does not warn you if you try to send a Frame Chase editing clip to Media Services Transcode. Do not send ingesting clips to
Media Services Transcode. Wait until the clip is completely ingested.
➤
Bug Number: UDevC00086768. You might see the following error message when loading a clip captured by Frame Chase capture in the editor: “Error encountered during relink process: New track length does not equal original track length.”
Workaround: In the editing application, right-click the clip and sequence and select
Update from Interplay. In Assist, refresh the clip from the Interplay database by selecting the clip and pressing F5.
➤
Bug Number: UDEV00195662. When you are capturing and using the passthrough monitor, desktop passthrough might cover error messages that are in the same space as the passthrough monitor, preventing you from being able to read them.
Workaround: Move the affected window or message box away from the Record monitor, put another application in front of the Avid application, and then go back to Avid to force the
UI to refresh.
➤
Bug Number: UDEV00220761. When you capture from an HDV device through 1394 into an HDV interlaced project, you might see the video break up into squares. The captured media is intact and complete, however.
41
42
➤
Bug Number: UDEV00197055. When you capture media that includes invalid frames, you might see an error message that the capture has been aborted and the invalid frames discarded and it asks you if you want to keep the clip. This message is incorrect; the invalid frames have not been discarded.
Workaround: Click No to discard the clip, and then recapture using new marks that exclude the bad sections on the tape. Do not keep the clip.
➤
Bug Number: UDEV00204777. When you deselect Enable Confidence View in the Video
Display Settings dialog box and then open the Capture tool, the Client monitor does not display passthrough.
Workaround: Do one of the following: t Select Enable Confidence View.
t Click the Capture button in the Capture tool.
➤
Bug Number: UDEV00184515. In an HDV project, you can only capture audio at the 48k sample rate. Because the incoming audio is digital over FireWire
®
, the software is unable to up-sample 32k and 44.1k audio reliably during capture. If you try to capture audio at another sample rate, you do not receive the error message warning that the audio on the tape does not match the setting in the Audio Project Settings dialog. Currently, only the 48k sample rate is supported in the HDV project format.
➤
Bug Number: . If you lose connection to your 1394 port or receive “OHCI Port Busy” errors, check the FireWire cable length.
➤
Bug Number: . When you capture HDV, the system might not find the preroll point if the
Preroll setting is set to 3 or below. The default is set to 6. Do not set this option to 3 or below.
➤
Bug Number: UDEV00183907. (HDV) Passthrough does not work if Delay Audio is set to
7 frames or greater. (The Delay Audio option appears in the Capture tool.)
Workaround: Set Delay Audio to 6 or fewer.
➤
Bug Number: UDEV00181815. Drop frame/Non-drop frame mismatch errors occurred often when capturing. A new Deck Preference setting has been added. Access the Deck
Preferences Settings dialog box. A new “When the deck contains no tape Log as” option appears. Select the timecode format (Drop Frame or Non-drop Frame) for logging clips when no tape is in the deck. When a tape is in the deck, the system automatically uses the existing timecode format on the tape.
➤
Bug Number: . (HDV) When switching from one project format to another while connected to an HDV device, you must turn the HDV device off and then turn it back on again.
Limitations and Known Issues
➤
Bug Number: . (Windows) If after initially setting up a DV deck for the first time, or after a system recovery you cannot see the deck, manually register the DV buffers file by doing the following:
Workaround:
Perform the following:
1. Go to Program Files\Common Files\Avid.
2. Right click Dvbuffers.ax.
3. Select Open.
4. Choose to select the program from a list and click OK.
5. Browse to windows/system32.
6. Select regsvr32.exe.
➤
Bug Number: UDEV00145432. The following error message appears if you attempt to capture DV 25 from a DV 50 source or DV 50 from a DV 25 source: “Exception:
ADM_DIO_ERROR_OCCURRED, DIOerr:Expected DV50 NTSC but received
DV25NTSC.”
➤
Bug Number: UDEV00139553. When you batch capture long clips with a lot of metadata, the following error appears and no media is captured: “Exception:
MXFDomain::SaveMetaDataToFile - Failed to save meta data to file.” This does not occur when you batch capture OMF.
➤
Bug Number: . When you capture from a Panasonic AJ-SD93P or Panasonic AJ-SD93E, note the following: the Panasonic default for DIF SPEED is set to S400. The Adrenaline and
Avid Mojo expect a DIF SPEED of S100. Capture fails, producing scrambled or blocky images.
Workaround: From the Panasonic DVCPRO deck's menu, set the menu DIF SPEED to
S100.
➤
Bug Number: . When you capture DVCPRO HD from a Panasonic HD 1200A deck, keep the menu DIF SPEED set to S400.
Compatibility
➤
Bug Number: UDevC00132057. (Macintosh Snow Leopard v10.6.1) The Avid editing application might hang if you try to browse using the “Search For” option in the Select Files window. For example, you might get the beach ball if you right-click a new bin and select
Search For in the Select Files window. The occurrence of this is reduced if you have
43
installed Snow Leopard v10.6.2. If you still experience intermittent hangs, go to System
Preferences > Spotlight > Privacy and drag your drive(s) to the window. This disables search on the drives. Avid is tracking this issue.
➤
Bug Number: UDevC00129804. The list of available transcode resolutions in the Transfer
Settings list is not accurate. Some of the resolutions listed might be incompatible with the current project’s media resolutions.
➤
Bug Number: UDevC00125617. Ancillary Data and Nitris DX: Due to software DNx codec performance requirements, you must have a dual quad core system in order to capture
DNxHD 220 or 220x with ancillary data on the Nitris DX platform. If your system does not meet the system requirements, the only way to capture DNxHD 220 or 220x is to make sure that ancillary data is not enabled.
To switch the ancillary data feature on and off:
1. 1. Select Tools > Console.
2. 2. Type the following command: Embeddnxcc
OR
In the Media Creation Settings Capture tab, deselect Ancillary Data Enabled.
➤
Bug Number: UDevC00121033. Playing back EVS media on a Symphony Nitris (classic) is not supported. Playback is supported for Symphony Nitris DX.
➤
Bug Number: UDevC00110632. (Windows) If you are running a Digidesign audio device, such as the Mbox 2, with the editing application and that device appears to be inactive:
Perform the following:
1. Quit the editing application.
2. Run the Digidesign Audio Drivers Installer Program in the Avid Utilities folder.
3. Reboot the system.
4. If the audio device is still inactive, access C:\Program
Files\Digidesign\Drivers\DigiDriver.exe and select “Install.”
For Windows Vista 64, the location is C:\Program
Files(x86)\Digidesign\Drivers\DigiDriver.exe.
➤
Bug Number: UDevC00100881. You cannot connect to a Sony e-VTR device when using e-VTR manager on a Microsoft Windows Vista32 or Windows Vista64 systems. The Sony e-VTR logging application does not support Vista.
44
Limitations and Known Issues
➤
Bug Number: UDevC00119004. Previously, the Best Performance Video Quality option
(yellow/yellow) was the only option available when working with HD projects in
MultiCamera Mode. The yellow/green video quality option is now available in MultiCamera
Mode when working with HD projects.
➤
Bug Number: UDevC00112765. Currently, it might take longer to load a long-GOP 9-way or Quad Split source view.
➤
Bug Number: UDevC00105849. If you open the AudioSuite tool when unlicensed plug-ins are installed, the system will lock up.
Workaround: Either remove the demo or unlicensed plug-in from your system, or connect the iLok dongle that has the valid license key to the system.
➤
Bug Number: UDevC00104160, 00024645. If your original project was a 1080i50 or
1080p25 project, when you are working in a 25i PAL project, the bin headings for MPEG 30 and MPEG 50 might not be accurate.
➤
Bug Number: UdevC00102207. (Macintosh) If you find that your mapped F keys are not working, go to System Preferences > Mouse and Keyboard > Keyboard tab and make sure
“Use F1-F12 keys to control software features” is checked.
➤
Bug Number: 99387. Currently, if you are exporting a QuickTime movie and select the
Custom option, you might receive an Access Violation and a Structured Exception loop dialog. You must force quit the application or select Abort on the Structured Exception dialog box. In QuickTime player, go to Edit > Preferences > QuickTime Preferences, then select the Advanced tab and select “Safe mode (GDI only)” under video.
➤
Bug Number: UDevC00098170,UDevC00098065. If you are working on a standard-definition (SD) project with an Avid Nitris DX or Avid Mojo DX attached to your system, you cannot use the Best Performance mode for video playback. If you open an SD project created on a system with an Avid Adrenaline attached and utilize Best Performance mode, the Avid Nitris DX system promotes the video quality to Draft Quality. Either click the Video Quality button and select Draft Quality or Full Quality, or change the project type to the appropriate high-definition format.
➤
Bug Number: UDevC00101326. Currently, if you export a QuickTime movie and convert the sample rate on export, it might result in bad audio.
➤
Bug Number: Udevc00101033. (Adrenaline, Windows Vista) If you are running your editing application on the xw8400 or xw8600 computer you must have the HP 1394a
FireWire card (Avid PN 7030-20154-01; HP PN PA997A) or the Sonnet Technologies™
45
Allegro™ FW400 1394a FireWire card installed. You may experience “Huffman Decode” errors during batch capture or capture on-the-fly if you run with an unapproved Firewire card.
➤
Bug Number: UDevC00097564. Currently, if you are on a Windows Vista 64 editing application and you try to open a bin that was created on a Windows XP editing application, you might receive an “Unable to open file” message. The issue is that when you move a file from the desktop to the project folder, it loses access rights. Access the file as an administrator and add Authenticate Users with Full Control.
➤
Bug Number: UDevC00093513. (Macintosh) The editing application might not launch if your system volume name contains "/" . Make sure the computer volume name does not include a “/”.
➤
Bug Number: UDevC00090317. A non-Administrator cannot send or receive EDLs. You must be an administrator to use EDL Manager.
➤
Bug Number: UDevC00079997. (FilmScribe) The Tape Name does not appear in a cut list when you select the TapeID column heading.
Workaround: If you select both the Reel# and TapeID column heading, the Tape Name appears.
➤
Bug Number: . (Macintosh) When you are using the search feature in the Avid editing application Help, a bug exists if Safari™ is your default browser. You might experience issues when performing searches. You need to empty the Safari cache in between searches
(Select Safari > Empty Cache.) This search issue does not occur when you use Firefox™ as your browser.
➤
Bug Number: UdevC00007737. If you are using an Mbox 2 and an HP8400 computer, you should connect the Mbox 2 to a rear USB port. The USB ports on the front of the HP8400 can cause problems with the Digidesign Driver Installer. Once the installation is complete, you can connect the Mbox 2 to the front or rear USB ports.
➤
Bug Number: UDEV00140811, UDEV00140767, UDEV0221008. If you are using the
Safari browser to access the Avid Learning Excellerator™ site (select Help > Learning
Resources, and then click the Avid Learning Excellerator link), you must have Javascript
® and cookies enabled (Safari > Preferences > Security).
➤
Bug Number: UDevC00052206. Due to changes in Avid Media Composer v2.5.x
(Macintosh), some third party AudioSuite and AVX plug-ins may not load properly. This is due to moving the Avid editors to Xcode® from CodeWarrior™ 9 for support of the new
46
Limitations and Known Issues
Mac Intel® based systems. Customers may need to upgrade their AudioSuite and AVX plug-ins. Please note that Avid has informed Third Party partners of this change. Third Party plug-ins that have not been updated will not be supported in this release.
➤
Bug Number: UDevC00079523. If you are a non-administrator and you want to launch
AudioSuite Plug-Ins, make sure you have an administrator make you a member of the
AvidUsers group which is automatically created during installation.
➤
Bug Number: UDEV00219672. You currently cannot select HDV projects in the
MediaLog™ application.
➤
Bug Number: UDEV00164891. (NewsCutter Software Only) When working with the
HP/Compaq nw8000 laptop, if you press the volume button (which is located on the front of the laptop, not on the keyboard), this causes an overwrite in the source/record edit to the
Timeline.
➤
Bug Number: UDEV00141328. Sending to Digidesign
®
Pro Tools: When you export an
OMF 2.0 file that links to MXF media, you should first transcode the MXF Media to OMF media. If you have a long sequence containing MXF media, you are not prompted prior to the export process that the export will not be successful. To save time, transcode MXF media to OMF media prior to exporting as OMF 2.0.
➤
Bug Number: UDevC00091387. Due to an issue with the RICOH FireWire controller on the Dell M65 and M90 laptops, when playing out to the host in 1394 mode, as well as a DV device via the “Output to DV Device” option, video and audio may drift out of sync.
Workaround: Turn off “Output to DV Device.” Or, if you have to use the DV Device for monitoring, connect the speakers or headphones to the DV device/camera instead of the PC.
➤
Bug Number: UDevC00120475. Editing keyboard shortcuts such as Ctrl+X and Ctrl+C do not work in MetaSync Manager. Use the menu commands.
Digital Cut
➤
Bug Number: UDevC00102676. When performing a digital cut, you will receive the message “If you have a genlock signal connected to your BOB, please switch it to match the output rate. Use an appropriate black burst sync source. Then wait for the REF light on the
BOB to turn green and press Continue.” If the light turns green, press Continue and the digital cut will be performed. If not, make sure an appropriate sync source is connected and wait for the REF light to turn green.
47
➤
Bug Number: UDevC00097111. (Avid Nitris DX/Avid Mojo DX) Currently the blue bar in the Timeline might not reach the end of the sequence at the end of a digital cut. All frames are actually cut to tape.
➤
Bug Number: UDevC00118267. A “Media Offline in Composition” error might occur with a Digital Cut even when all media is online. Select Continue to perform the Digital Cut.
➤
Bug Number: UDEV00222537. (Macintosh) When performing a 720p/59.94 digital cut, the first frame of the sequence might be missing.
Workaround: Add half a second of black before the sequence.
➤
Bug Number: UDEV00220887. The first 35 frames of a sequence might be missing when you perform a digital cut after selecting Crash Record and Ignore Time in the Digital Cut tool.
Workaround: Add filler to the beginning of the sequence.
➤
Bug Number: UDEV01845957. When performing an HDV digital cut, the last few seconds are not cut to tape.
Workaround: Generate a clip of black and add it to the end of the sequence.
➤
Bug Number: UDEV00174311. A digital cut of an HD project might drop the last frames of audio.
Workaround: Add 10 frames of audio to the end of the sequence.
➤
Bug Number: UDEV00135921. When you perform a digital cut using the Pioneer
®
PRV-LX1 DVD recorder, select Ignore Time in the Digital Cut Tool window.
➤
Bug Number: UDEV00136395. A video underrun might occur at the start of a digital cut if the Digital Cut tool does not have focus when you click the Play Digital cut button. The
Digital Cut tool must be active before you click either the Start or Preview button. If an underrun occurs at the very start of the digital cut, you should be able to perform the digital cut without a problem.
➤
Bug Number: UDEV00139484. When you perform a digital cut to a Panasonic DVCPRO
HD deck using HD-SDI with 720p/59.94 material, several frames of black might be written to tape before the start of the outputted sequence. This might result in the end of the sequence being truncated on tape.
Workaround: Place several seconds of black or color bars at the end of a sequence.
48
Limitations and Known Issues
➤
Bug Number: UDEV00138162. The Digital Cut tool does not allow certain durations of black to be added to the tail of a sequence. Certain values (including 20 minutes, 30 minutes,
60 minutes, and so on) reset the clock to zero when applied. If the value you entered resets to zero when applied, adjust the value upward or downward until a satisfactory length is determined (at which point the clock does not reset itself and the desired duration is correctly applied).
Dynamic Relink
➤
Bug Number: 103557. Any MPEG2 352_30I MXF media created with an x.8.1 or x.8.3 editing application will not relink in Exact match in versions x.8.4 of the editing applications or the Media Composer 3.0 or Symphony 3.0 or NewsCutter 7.0 versions of the editing application. The MPEG2 352_30I MXF media created with an x.8.1 or x.8.3 was compressed at 15MB instead of 2MB and therefore will not relink in Exact match.
Workaround: Change the Dynamic Relink settings to use the “Most compressed” option or change the “If no match is found” option to “Relink to Closest.”
➤
Bug Number: UDEV00225796. When working with HDV projects, HDV resolutions are not available for Dynamic Relink.
Workaround: Choose “Use Closest Media” instead of “Relink to Offline” when in HDV projects and “Specific Resolution” is selected as the Relink Method. If you do not choose
“Use Closest Media,” captured clips appear as offline when Dynamic Relink is enabled.
➤
Bug Number: UDEV00221144. If you want to re-create title media at a target format other than the working format, you must change the project format to that designated for the target. Otherwise only the working format resolutions are available.
Effects
➤
Bug Number: UDevC00134733. Rendering an effect in a software only configurations will not preserve ancillary data.You must capture, edit and output the HD media with ancillary data using Avid Nitris DX, Avid Mojo DX, Avid Adrenaline or Avid DNxchange input/output hardware.
➤
Bug Number: UDevC00118276. You might experience dropped frames on the initial playback of a sequence containing a Pan and Scan effect.
Workaround: Set the Image Interpolation option in the Render Settings to Standard
(Bilinear).
49
➤
Bug Number: UDevC00112035. You might receive a bus error when exporting a sequence in a 24p NTSC project that contains a scratch removal effect. Render the sequence first.
➤
Bug Number: UDevC00117131. Currently, you cannot preview Multi channel audio clips with AudioSuite Dynamic 3 plug-in effects. The plug-ins work in the Timeline.
➤
Bug Number: UdevC00117990. If you try to conform an AFE created from the Avid Media
Composer or Avid Symphony editing application to Avid DS, the Color Correction animation effects will not conform. The effects will be replaced with a wipe effect. You should demote the color corrections. Right-click the sequence that contains the Color
Correction effects and select Demote Effects. This creates a a duplicate sequence that you can open in Avid DS.
➤
Bug Number: UDevC00114633. When you apply a SubCap or TimeCode Burn-In effect to a clip with the Effect Editor set to Thumbwheels, the first few characters in the text field are cropped from view. They do appear properly on the image.
➤
Bug Number: UDevC00113832. Applying Boris Continuum Complete deinterlace above other effects might corrupt the image.
➤
Bug Number: UDevC00115301. You might receive an “AudioSuite DAE” error when you render a master clip with a ReelTape AudioSuite Plug-in. The error does not occur if you render in the Timeline.
➤
Bug Number: UDevC00118588. The Tracking window becomes deselected after switching from a nested effect to the top-most effect. You must close and then reopen the Tracking window to make it available.
➤
Bug Number: UDevC00118505 . Currently, a Superimpose or Dissolve effect does not promote to 3D Warp.
Workaround: First promote to Advanced Keyframe, then to 3D Warp.
➤
Bug Number: UDevC00109451. When the Color Correction window is open, Loop Play will include the sequence, not just the current clip, even if the Effect Editor is open.
➤
Bug Number: UDevC00120950. You might experience dropped frames when playing back an HD sequence containing a Safe Color limiter effect with the “422 Safe” option selected.
➤
Bug Number: UDevC00113368. When working in 3D Advanced keyframes, occasionally, keyframe points might not display in the path.
50
Limitations and Known Issues
Workaround: Click the Enlarge or Reduce button located below the Effect Preview
Monitor.
➤
Bug Number: UDevC00106944. In a 1080i59 project, effects that invert or resize the image might appear field-reversed during play in an SD timeline.
Workaround: Transcode the media to SD.
➤
Bug Number: UDevC00097157. A clip with an unrendered TimeWarp effect might not import to Pro Tools. Render the effect before exporting.
➤
Bug Number: UDevC00090708. When you try to run AudioSuite you might receive the following message, “Your computer is missing a Windows XP update required by ProTools.
Please install all available critical updates before installing Pro Tools.” If you do, you must perform a Windows Update, Custom Install to ensure the correct .dll is installed.
➤
Bug Number: UDevC00003573. While in Effect mode, you might not be able to scrub through blue dot effects and have the monitor update. Move the Effect Editor so that it overlaps some part of the Composer monitor. The monitor should now update correctly when you scrub through blue dot effects.
➤
Bug Number: UDEV00225614. Safe Color limits might be exceeded in SD downconverted output from an HD project. In an HD project, if you use the Safe Color Limiter effect to ensure safe colors in a sequence and then output that sequence using SD downconvert, some transient pixel values might exceed your safe color ranges. This is a consequence of the resizing process performed in the Avid Nitris or Adrenaline hardware during an SD downconvert.
Workaround: Change the project type to an SD type before you output or render the sequence.
➤
Bug Number: UDEV00219374. In 30i or 1080i60 projects, Timewarp effects that use the
Film With 2:3 Pulldown Input format might not render correctly. Some frames might remain unrendered or it might not be possible to complete the render. This problem is known to occur in the specific circumstances described below, but might also occur in other circumstances.
Partial Render. The problem might occur if you perform a partial render of a Timewarp effect using the Film With 2:3 Pulldown Input format, then render the remaining part of the segment. Some frames might remain unrendered or the second part of the segment might not render.
51
52
Division of rendered segment. The problem might occur if you render an entire Timewarp effect using the Film With 2:3 Pulldown Input format, and then divide the segment (for example, by performing an overwrite edit of new material into the middle of the segment).
Some frames in the second part of the divided segment might become unrendered.
Trimming head frame of rendered segment. The problem might occur if you render an entire
Timewarp effect using the Film With 2:3 Pulldown Input format, and then trim the head frame of the segment. Some frames in the segment might become unrendered.
➤
Bug Number: UDEV00207851. You might not be able to render a FluidBlur,
FluidColorMap, or FluidMorph effect in an HD project if there is not enough memory available.
Workaround: Try one of the following: t In the Bins tab of the Project window, click the Clear button, and render the Fluid effect
(see “Managing Bins and Memory” in the Help).
t Close all unused bins, relaunch, and render the Fluid effect.
t In the Format tab of the Project window, switch the project format to an SD format, render the Fluid effect, then switch back to HD.
➤
Bug Number: UDEV00221706. Very high speed Motion Effects with rates greater than
500% no longer play in real time; they now appear in the Timeline as a blue dot effect, and must be rendered. Since any motion effect with a rate greater than 100% plays back inefficiently, and the higher the rate the less efficiently it plays back, real time playback efficiency will improve by rendering such motion effects.
➤
Bug Number: . (HDV) If a clip contains Timewarp effects, you should render the effects.
➤
Bug Number: . You might experience effects render issues with stacked effects.
Workaround: Render each individual track starting with the bottom track.
➤
Bug Number: UDEV00197962 . When you are working with AVX effects, performing an
Expert Render or a Render IN to OUT on a sequence that contains multiple third-party AVX effects might lead to excessive memory consumption that could cause the application to hang or to display errors.
Workaround: Render the effects in smaller groups.
➤
Bug Number: UDEV00214545. AVX 1.0 effects might have invalid color levels.
➤
Bug Number: UDEV00194693. You might see problems with superblacks in 16-bit mode.
Limitations and Known Issues
➤
Bug Number: UDEV00189486. Performing an Add Edit on a promoted Advanced
Keyframe Picture-in-Picture effect might cause a “DataPointOneError.”
Workaround: Instead of first promoting to 3D, then Advanced Keyframe, promote in the reverse order.
➤
Bug Number: UDEV00132940 . You might see a “FluidMotion Vector Edit Requires Full
Resolution” error if you work in FluidMotion™ Vector Edit mode in anything other than full resolution (green mode in the Timeline). Render FluidMotion effects before you combine them with any other effects, especially any other time-based effects.
➤
Bug Number: . (Progressive projects only) If a clip contains any of the following effects, you must render the effects before you apply Scratch Removal:
• Timewarp effects
• Any effect that has been promoted to the Advanced Keyframe model
➤
Bug Number: UDEV00134286. Removing or undoing some timewarp effects might cause audio and video to lose sync.
➤
Bug Number: UDEV00161774 . In the Transition Corner Display mode, two of the six frames display incorrect frames during trim operations initiated from the Timeline.
Workaround: Trim using the Trim buttons.
➤
Bug Number: UDEV00144549. The Fluid film 2:3 timewarp effect might render incorrectly when you are rendering fluid motion type. The effect might flash a crop of left and right edges.
Workaround: Set the left and right mask in the FluidMotion Editor to zero.
➤
Bug Number: UDEV00164929. (HD only) Any animated alpha matte over 35 seconds long might fail.
➤
Bug Number: UDEV00163592. When an Avid effect is applied in an SD 24p progressive project, it can create unwanted aliasing on the resulting clip.
Effects (Pan & Zoom)
You might encounter the following limitations when you use the Pan & Zoom effect:
➤
Bug Number: UDevC00119611. If you run out of memory when using Pan & Zoom, resize the images to a lower resolution using an application such as Adobe Photoshop software.
53
➤
Bug Number: UDevC00088408. (Macintosh) After the link to a Pan & Zoom effect is broken and you want to reestablish it, the application doesn’t prompt you for the source image name in the Open dialog box.
Workaround: Import still images into a bin and use them in the edit. With the imported image in the Timeline, apply the Pan & Zoom effect and load the respective file from the
Open dialog box. This way you can use “Clip Text” and confirm that the correct images are being loaded.
➤
Bug Number: UDevC00088408. (Macintosh) After the link to a Pan & Zoom effect is broken and you want to reestablish it, the application doesn’t prompt you for the source image name in the Open dialog box.
➤
Bug Number: UDevC00081281 . Pan & Zoom keyframe settings can revert to defaults if you select all keyframes when you link to a new picture.
➤
Bug Number: UDevC00025291. When you zoom in with Hi Qual and Ultra Qual filtering, you might experience a system error (Windows) or see green lines when you preview
(Macintosh).
➤
Bug Number: UDevC00090139. To improve memory issues, the options in the Pan &
Zoom Cache Fast menu are ignored and Video Resolution is used, although when you render the effect, the highest-quality resolution is always used. After you partially render a Pan &
Zoom effect, however, you might see a slight pixel shift when you move between the rendered and unrendered portions.
Export
➤
Bug Number: UDevC00112498. QuickTime Movie export fails when using the Qualcomm
PureVoice audio compressor.
➤
Bug Number: UDevC00117134. (Mac Intel) You might have received “image buffer” errors when exporting to DNxHD in Adobe After Effects
®
7. This error does not occur with
After Effects CS3 or CS4.
➤
Bug Number: UDevC00106032. (Macintosh) Exporting HDV files to the desktop results in a 0 k file on the desktop. The file will actually appear in your Macintosh User folder. If you export to a folder, note that the file will actually be created one folder level above.
➤
Bug Number: UDevC00090871. (Macintosh) When sending a QuickTime Reference to
Sorenson Squeeze, Auto Load and Reveal Files do not work. Squeeze will launch, but the sequence does not load nor are the files revealed in the Finder window.
54
Limitations and Known Issues
Workaround: Manually import the files into Sorensen Squeeze.
➤
Bug Number: UDevC00098849, 103011. (Macintosh) If you try to export to a read only drive you may get an exception. Ensure you are exporting to a writable drive.
➤
Bug Number: UDevC00102078, 101999. Export to HDV Device will fail on a Windows system if your sequence contains native HDV media (HDV media captured from tape). This does not apply to Macintosh systems.
Workaround: Transcode to another resolution before performing the export.
➤
Bug Number: UDevC00081152. An error might occur when you export to HDV when the first frame of the sequence is a video mixdown clip.
Workaround: Place filler or a frame of non-video mixdown media at the head of the sequence.
➤
Bug Number: UDevC00049124. Currently, export settings allow a 720x486 size when you export Avid DV, which creates a field alignment issue. Make sure that you set the export settings correctly for 720 x 480 for DV exports. Currently, QuickTime must do a resize from
486 lines down to 480 and you receive an odd interpolation. (Even if you specify 720x486, the Quicktime file displays 720x480.)
➤
Bug Number: UdevC00054456. In NTSC, QuickTime Same as Source and QuickTime
Reference clips containing DV material can sometimes show visual distortions when burned to DVD from Avid DVD. This is because the DV portions are resized from the DV raster size 720x480 up to the standard NTSC raster size 720x486.
Workaround: When exporting the QuickTime Same as Source or Quicktime Reference clips, choose “Use Avid DV.”
➤
Bug Number: UdevC00007778, UDevC00025957. (Macintosh) The editing application might crash after exporting to an Avid Unity ISIS Read-only workspace. Make sure you export to a Read/Write workspace. You can determine whether a workspace is Read/Write through the Client Manager application. Navigate to the Workspaces tab in Client Manager.
The Read/Write workspaces are listed with an R/W under the name of the workspace.
➤
Bug Number: UDevC00078454, UDevC00081066. If you have a mixed-resolution DV 25 sequence and try to export it as QuickTime for DVD using the Apple DV Codec, the .mov might contain artifacts.
Workaround: You must use the Avid DV Codec for this kind of sequence.
55
56
➤
Bug Number: UDEV00180852. You might receive exception errors when exporting HDV
1080i/59.94 or 1080i 50 as Windows Media.
➤
Bug Number: UDEV00181835. When exporting to an HDV device, at least 4 to 5 seconds of media might be missing from the beginning of the sequence.
Workaround: Add 10 seconds of color bar or black filler at the beginning and at the end of the sequence.
➤
Bug Number: UDEV00140687. When you export a QuickTime Reference movie, do not mix DV and non-DV media. If you mix DV and non-DV media, the resulting movie might contain line shifts.
➤
Bug Number: UDEV00087119. When you export pan automation on an audio clip as AAF, it does not translate in Pro Tools. Pro Tools does not accept varying value pan controls during import.
➤
Bug Number: . In the Export Settings dialog box, the default size is not the image size of the opened project.
➤
Bug Number: UDEV00086337. When you play an exported clip in the Windows Media
Player, the sequence stalls in the desktop monitor. The audio plays, the blue bar progresses in the Timeline, and the video and audio output to the client monitor is OK. If the clip that is loaded in Windows Media Player is removed, then the Play operation plays properly in both the desktop and client monitors.
➤
Bug Number: UDEV00138232. Exporting Locators exports only a .txt file with frame count information, not timecode or Feet and Frames. Import also supports only frame count.
➤
Bug Number: . (Encoding to Windows Media) A “Not enough memory is available to complete this operation or WM_BeginWriting_FAILED” error results from the application running out of available memory (RAM) while you perform the encode. Encoding to a
Windows Media Video codec requires a lot of memory. The amount of memory required is directly related to the number of audio and video profile streams, width, height, bit rate, number of passes, VBR/CBR, and quality of the encoded video, as well as the resolution of the source media. If you encode HD media, you might need to reduce the bit rate, turn on
2-pass encoding, turn on VBR, lower the quality, or reduce the frame dimension.
➤
Bug Number: . A “WM_FindInputFormat_FAILED” error might appear if the Windows
Media exporter cannot find a suitable input format for a video or audio stream contained in the current Windows Media Export setting's stream profile. For example, using non-standard frame dimensions might result in this error. See the Microsoft Windows Media Web site for more detail.
Limitations and Known Issues
ICS (International Character Support)
➤
Bug Number: UDev00089590. Workspace names that contain non-ASCII characters can cause poor performance when working in a bin.
Workaround: Use only ASCII characters in workspace names.
➤
Bug Number: UDevC00051974. If you capture a clip from a workspace with a French name through CaptureManager™, in the Avid editing application the bin heading Drive might be empty where it should list the French name of the workspace.
➤
Bug Number: UDevC00051060,UDevC00088815. If you change the font or font size of your input, and see characters rotated 90 degrees, make sure you select the correct font. Do not use any font that begins with the “@” symbol.
➤
Bug Number: UDevC00052541. Do not create a project using the Euro currency character
(ALT 0128). The project fails to be created and a “Can't Open Project” error message is displayed.
➤
Bug Number: UDevC00022395, 22346. Certain Asian characters might not appear in the correct order in some text boxes in your Avid editing application.
Import
➤
Bug Number: UDevC00049653. Occasionally, if you cancel an import of a clip, you might receive a “DISK_SHARING_VIOLATION” error.
➤
Bug Number: UDEV00086727. When you import an uncompressed QuickTime file, a
PICT image, or a TIFF image, the first 4 or 5 vertical columns of pixels might truncate when you display the file in the Source, Record, or client monitors.
➤
Bug Number: UDEV00141372. When you batch import a sequence with a graphic animation that was created in a 30i project and then modified in a 720p project, it might not import.
Workaround: Import the graphic and manually edit it back into your sequence.
➤
Bug Number: UDEV00138270. Avid editing systems cannot import AVI files created on
Avid DS Nitris systems. The import fails with an error message stating that the file format is not supported for import.
57
Installation
➤
Bug Number: UDevC00102551. (Macintosh) When launching the editing application, and the Audio is initializing, “CoreMIDIServer.framwork” might bounce in the dock. It may remain in the dock until you quit the editing application.
Workaround: Delete DigiDioMidDriver.plugin from the Library/Audio/Drivers folder.
➤
Bug Number: UdevC00106344. After installing the editing application on the Windows
Vista OS, when you choose to reboot the system, the shutdown cycle is longer than usual.
➤
Bug Number: UDevC00103563. On Windows platforms, occasionally the PACE installers do not properly update the iLok drivers. PACE iLok drivers are used to copy-protect
Digidesign plug-ins. If this happens, the AudioSuite functionality in Media Composer will be disabled. To correct the situation the user should uninstall all instances of Interlok Drivers from the Windows Add Remove Control Panel and re-install the Digidesign Drivers from the CD or from Avid > Utilities.
➤
Bug Number: UDevC00103537. Once you install the editing application, and once the editing application tries to launch, while it is initializing, you might receive an “Unable to create index for editor slides” error message.
Workaround: Right click the product.exe and choose “Run as administrator.” This causes the mdb and pmr files to update in the Avid_MediaFiles folder.The executable is located (by default) in C:\Program Files\Avid\Avid Product Name.
➤
Bug Number: UDevC00103474. (Windows Vista) When the editing application is launched and a firmware update is required, you might be prompted to relaunch using “Run As
Administrator”. To run as administrator, right-click the product.exe and select Run as administrator. The executable is located (by default) in C:\Program Files\Avid\Avid Product
Name. Run as administrator is not available by right-clicking in the Avid editing application
Shortcut icon.
Interplay Workgroup
➤
Bug Number: UDevC00105773. When you create a video or audio mixdown and add a locator, you might receive an “Exception: CM_NO_TC” error when you try and check the clip in to Avid Interplay. If you add the locator in Assist, then go back to the editing application and perform an Update from Interplay on the clip, the clip will check in successfully.
58
Limitations and Known Issues
➤
Bug Number: UDevC00105408. (Windows Vista) If you have a P2 drive mounted and you try to open the Interplay Service Configuration tool, you might receive an Exception error.
Clicking through the error message might allow you to open the tool. If you unmount the P2 drive, the tool will open.
➤
Bug Number: . When checking out a complex or long sequence from an Avid Interplay environment the following message might appear: “A request for data from the asset manager is taking a long time to complete. Would you like to continue waiting for the operation to complete or would you like to cancel?” If you choose to wait the sequence may load or you may get this message multiple times until the check out actually occurs.
➤
Bug Number: UDevC00091228. Selecting Check In All Open Bins from the Fast menu
(hamburger menu) in the bin might not check in the open bins.
Workaround: To check in all open bins, select Check In All Open Bins from the File menu.
➤
Bug Number: UDevC00090338. After you perform a search for media in the Interplay
Window, you cannot refresh the search results displayed in the Research panel by pressing
F5. If you want to refresh the results, repeat the search.
➤
Bug Number: UDEVC00052480. Batch Import of files containing Alpha. This problem occurs if you want to batch import files in SD and HD formats and then use Dynamic Relink to switch between the different formats. The problem occurs with QuickTime movies, graphics, and sequences that contain alpha. You can batch import the files and relink to the different formats, but if you exit and then restart the Avid editing application you can no longer relink to the HD format. The system displays an “Exception: NO Compressed Data
Format found” error message.
Workaround: You cannot use Dynamic Relink with HD and SD clips that contain alpha.
Import the HD files with alpha as individual clips. When you want to switch to HD format, edit the HD versions into your sequence.
➤
Bug Number: UDEV00227044. If you import a graphic from your local drive into a project in an Avid editing application, change the original name of the clip to a name of your choice, and check that clip into a folder in the Interplay Window, the new name does not appear in the Interplay Window even when you refresh the window. You see only the original name.
➤
Bug Number: UDEV00217606. In the Avid editing application, the Record Track monitor buttons might be deselected if the following happens:
59
1. On system1, create a sequence and check it into a folder in the Interplay Window.
2. On system2, check out the sequence and load it into the Timeline.
3. On system1, edit the sequence and check it into the Interplay folder again.
4. On system2, refresh the Interplay window then check out the same sequence again.
Workaround: Select the Record Track buttons again.
➤
Bug Number: UDEV00299154 . In an Avid editing application, if you have a sequence that you have not checked into the Interplay Window and you try to use the Transfer > Send to
Workgroup command, you might experience an error.
Workaround: Check the sequence into the Interplay Window before you attempt to transfer it.
➤
Bug Number: UDEV213923 . In workgroup environments prior to Avid Interplay, you could automatically consolidate from NewsCutter during Send to DMS. With the Avid
Interplay release, the automated consolidate is not available. Choose to consolidate prior to sending to DMS.
➤
Bug Number: UdevC0055755. When working with MultiRez, high-quality audio cannot be distinguished from up-sampled proxy audio created with previous versions of the editor. For instance, an 8 kHz proxy audio up-sampled to 48 kHz on import in Interplay version 1.0 is considered as good as a real 48 kHz high quality audio. In that case, if MultiRez is set to use
48 kHz audio, it picks up the most recent of the two files.
Force Disconnect Client Mode in an Interplay Environment
Your system administrator might need to temporarily remove your editing system from access to the network. This might occur if new software needs to be installed or if components need to be updated, for example. To force a disconnect, your administrator runs a script that forces disconnection from the network without physically removing your system. Your administrator can also reconnect your system at the appropriate time using another script.
It is possible to import from shared drives and export to them in Forced Disconnected Client mode. Avid recommends, however, that you do not import from or export to shared drives when your administrator has force-disconnected your editing system. Avid does not support any workflow that includes importing from or exporting to shared drives when the system is in Forced Disconnected Client mode.
60
Limitations and Known Issues
In general, if you are in Forced Disconnected Client mode and if you import or export using shared drives, after the import or export those drives might appear to be available for other purposes such as importing, capturing, playing, or deleting media, but they are not available.
Similarly, options for shared storage might appear to be available in various settings dialog boxes and shared drives and media might appear in various menus, tools, and applications;
Avid does not support use of these settings, drives, or media.
To remove the shared drives from your drive lists, disconnect your network cables as described in “Voluntarily Disconnecting from the Interplay Environment” in the Help, or exit your editing application and restart it.
The following limitations describe specific instances of drives and options appearing in
Forced Disconnected Client mode:
➤
Bug Number: UDevC00083319 . In the Select Project dialog box, shared workspaces and projects are available and should not be.
➤
Bug Number: UDevC00083320,UDevC00083772. Shared drives and media are available in the Media tool and in the MetaSync™ application and should not be.
➤
Bug Number: UDevC00083321. In the Interplay Server Settings dialog box, you can change the Interplay server name and you should not be able to.
➤
Bug Number: UDevC00083371 . In the Capture tool, you can select the Interplay Folders option as your capture destination and you should not be able to.
➤
Bug Number: UDevC00083374. In the MXF Media Files tab of the Capture Settings dialog box, you can select the “During capture, clip is updated in Interplay” option and you should not be able to.
➤
Bug Number: UDevC00083477. In the Temporary File Directory option of the General
Settings dialog box, you can type the name and location of a shared drive and you should not be able to.
➤
Bug Number: UDevC00083409. Shared drives and media are visible in the Hardware tool and should not be.
➤
Bug Number: UDevC00083740. Shared drives are visible in the Import dialog box and should not be.
➤
Bug Number: UDevC00083826. Options in the Media Services Settings dialog box are available and should not be.
61
➤
Bug Number: UDevC00083496. Options in the Transfer Settings dialog box are available and should not be.
➤
Bug Number: UDevC00084455, 84773. Selecting LANshare, PortServer settings, or
ProEncode™ appears to be available but should not be. Do not select these options.
➤
Bug Number: UDevC00084446. Dynamic Relink can be enabled but that should not have been allowed. Do not enable it.
➤
Bug Number: UDevC00084600, 84844. With several of the options in the File menu, you are allowed to select a shared workspace as a destination but you should not be able to. Do not select a shared workspace in this context.
➤
Bug Number: UDevC00084610. If you select Automatic Login at Project Selection in the
Interplay User Settings dialog box, enter Disconnected Client mode, exit the mode and the editing application, reconnect, and then restart the editing application, you need to log into
Interplay again and you shouldn’t have to.
➤
Bug Number: UDevC00088542. In Forced Disconnect mode, if you make a change to your
User settings, the change might appear for all other users, as well.
JVC
➤
Bug Number: UDevC00106545. JVC recommends using the BR-HD50 deck to capture and batch-capture HDV media recorded with JVC cameras.
➤
Bug Number: 106030. The JVC GY-HD250U camera might drift out of sync while shooting in 720p/59.94. To avoid this issue, turn on the camera in 720p 23.976 and then switch the format to 720p 59.94 causing a soft reboot.
➤
Bug Number: UDevC00106380. The Imported M2T files that were captured with a JVC
GY-HD250U camera via the FireStore DR-HD100 will show up in the bin with the wrong durations. This occurs in 720p 50 and 720p 60 projects.
➤
Bug Number: UdevC00106401. Currently, captured or imported M2T files might contain
1/2 frame offset. This occurs in 720p 29 and 720p 25 projects.
Locators
➤
Bug Number: UDevC00080303. If you add a locator to a shotlist, and then open the sequence in an editing application, the locator appears, but if you perform a match frame on the locator, it might not appear in the master clip.
62
Limitations and Known Issues
Workaround: In the editing application, check the master clip in question out of Interplay and then update the bin or the clip. The locator appears.
➤
Bug Number: . A new item has been added to the Fast menu in the Locators window.
“Disable Locator Popup” disables the locator pop-up window. It is disabled only for the work session. When you restart the Avid application, the locator pop-up menu is enabled.
➤
Bug Number: UdevC00079172. (Macintosh) When you export locators from the Locator tool, the file might not be saved with the correct .txt extension and you might not be able to import it.
Workaround: In the Choose Location for Exported Locators dialog box, add the file name extension .txt to the end of the file name before you click Save, or add the extension to the saved file before you import it.
Mixed Frame Rate and Field Motion Types
➤
Bug Number: UDevC00134365. You cannot transcode a sequence with mixed frame rates.
Only those clips with the same frame rate as the project format will be transcoded.
Workaround: Transcode the mixed-rate clips to the same frame rate as the current project.
➤
Bug Number: UDevC00126375. If you are sending a mixed resolution sequence to playback, make sure “Same as Source” is unchecked in the Media Creation Settings Render dialog box. The render format must match the primary playback format.
➤
Bug Number: UDevC00129278. When you bring a mixed frame rate sequence into Pro
Tools, make sure the “Ignore rendered audio effects” option in Pro Tools is disabled. If the option is selected, the audio for any mixed frame rate clips will be missing from the
Timeline.
➤
Bug Number: UDevC00129238. Some motion effects on Long GOP media might display as non-realtime effects where in the past they displayed as real-time. This might occur under the following conditions.
• The video track of the underlying clip is a spanned clip. For example, a spanned clip is one where the master clip originated from an XDCAM EX device, or a master clip that has been modified by dynamic relink after an operation such as partial restore. You can usually tell if a master clip is spanned by loading the master clip into the Source monitor, switching the Timeline to display the contents in the Source monitor and look for edits in the video track.
• The portion of the master clip being used by the motion effect crosses a span boundary.
63
This change also affects the motion adapters used when mixing frame rates and field motion types. If you have a spanned Long GOP master clip and you load it into the Source monitor of a project with a different edit rate, the video will not play in real-time in the Source monitor. If you edit a portion of the clip into a sequence, the resulting clip in the Timeline might play in real-time if the IN and OUT points do not cross a span boundary; otherwise it will remain non-realtime and you must render it to play it in real-time.
➤
Bug Number: UDevC00129602. Clips with mixed frame rates and field motion types are treated as Optical effects in FilmScribe. In order to generate a valid FilmScribe list, you must enable Optical in FilmScribe. Otherwise, the clips containing mixed frame rates and field motion types will reference an Optical list that does not exist.
➤
Bug Number: UDevC00122550. You cannot apply a Timewarp effect on top of a Motion
Adapter effect. If you attempt to do so, an “Effect does not apply” message appears.
However, you can promote a Motion Adapter effect to a Timewarp for full access to all
Timewarp effect parameters. For more information, see “Viewing and Adjusting Motion
Adapter Parameters” in the Help.
Panasonic
➤
Bug Number: UDevC00101216. Reveal File does not function on master clips linked from
P2 cards or virtual volumes.
➤
Bug Number: UDevC00098594, UDevC00097992. Panasonic P2 writeback is not supported on the Macintosh platform.
➤
Bug Number: . Export to P2 limitations:
• Use Marks and Use Enabled tracks are ignored on export.
• All Audio must be PCM 16b/48K.
• All audio tracks will be exported, although P2 devices either support 2 or 4 audio tracks.
Therefore sequences should be built for delivery to the specified P2 playback device.
Sequences with 6 audio tracks will have 6 audio tracks and the P2 device will only playback the first 2 or 4 tracks.
➤
Bug Number: . Importing P2 limitations (Macintosh):
• Importing P2 Clips in a bin is only supported with one P2 Card mounted. With two or more P2 cards mounted, use the Media Tool, select the P2 Drives, click All Projects and click OK. All Master Clips from the P2 cards will appear in the Media Tool. Drag them to a bin.
• When importing from the Panasonic P2 Store device, Media Tool must be used as well on Macintosh.
64
Limitations and Known Issues
➤
Bug Number: . SD/HD Mixed sequences are not supported.
➤
Bug Number: . 1:1 MXF media cannot be exported in both SD and HD projects. Transcode
1:1 MXF before exporting.
➤
Bug Number: . (Macintosh) Hotswapping P2 cards with the editor launched is currently not supported.
➤
Bug Number: UDevV00090107. Occasionally the File > Import P2 > Media command does not consolidate media to the drives.
Workaround: Close and re-open the bin and then execute the command again.
➤
Bug Number: UDevC0056503. When you view a P2 clip that spans across multiple P2 cards in the timeline, you might be surprised as to what you see and don't see due to the history of mounting P2 cards on your current system and the P2 cards that are currently mounted. Be aware that even though media is offline, or you are not able to view the P2 media in the Timeline, the media is not lost. The media appears when the card containing it is mounted.
➤
Bug Number: 00080719. If you have P2 clips on a P2 card and you display the clips in the
Media tool, you might be able to delete the audio and video .mxf files from the Media tool.
➤
Bug Number: UdevC00058135. If you remove a card from a slot in the P2 reader and do not put another card in the reader, you must delete the P2 folder before inserting that same card in another slot.
➤
Bug Number: UdevC00058133. A DVD drive cannot be a media drive. If a CONTENTS folder is located on the root level of the DVD, you might see a “No clips were found” message when performing an Import P2 Clips to Bin.
Workaround: Create a folder that contains the CONTENTS folder on the DVD. This instructs the editor to mount a virtual drive.
➤
Bug Number: UDevC00051731. When the P2 CONTENTS folder is located at the root level on a drive where the Avid editing application looks for media files, you might encounter errors when importing P2 clips. For example, if you are working on a laptop, the
Avid editing application and local storage folders are on the same drive and are usually located at the root level. If you create virtual P2 volumes on the Desktop, you might encounter a “No clips were found” message when trying to import the P2 clips and media.
Workaround: If you locate the virtual P2 volume in a different location such as a subfolder on the Desktop, you should be able use virtual P2 volumes.
65
➤
Bug Number: . If you experience unusually long scan times, check to make sure both the local time and Greenwich Mean Time (GMT) are set correctly on your camera. If the GMT is not set correctly, you may need updated firmware for your camera.
➤
Bug Number: . Play performance for a multi-stream sequence suffers when you directly access media from the P2 media cards in the AJ-SPX800P camera.
➤
Bug Number: UDEV00163029. If you turn off the P2 card reader while a bin accessing P2 media is open, attempting to load any P2 clip results in a DISK_FILE_NOT_FOUND message in the Source monitor window. The message should read Media Offline.
➤
Bug Number: UDEV00163032. Dupe detection is not available for P2 source material.
➤
Bug Number: . The following limitations currently apply when working with AVC-Intra resolutions:
• Playback of AVC-Intra is not supported with xw8400. Newer hardware does support playback.
• Real-time playback support on Avid Symphony Nitris is not guaranteed.
• QuickTime export is not supported.
➤
Bug Number: UDevC00128615. When using AVCIntra media, be aware that this resolution uses more memory than other formats.
➤
Bug Number: UDevC00116685. You cannot export a QuickTime movie using the Same as
Source option with AVC-Intra material. ProEncode does not work with AVC-Intra material.
This is related to the QuickTime problem because ProEncode creates a QuickTime
Reference movie as part of its process.
➤
Bug Number: . If you encounter unusually long consolidation times when working with the
P2 device, make sure you are using the USB cable supplied by the P2 manufacturer.
Play
➤
Bug Number: UDevC00117308. You might experience dropped frames when playing back
XDCAM media with effects. When playing back media, a number of variables affect play performance such as your CPU power, GPU power, sequence complexity and the raster settings.
➤
Bug Number: UDevC00109242. (MacBook Pro) After an initial launch of the editing application when attached to a Mojo, you might receive an “Assertion failed” error when playing back an HD sequence.
66
Limitations and Known Issues
Workaround: Switch the project to NTSC or PAL.
➤
Bug Number: UDevC00101060. You might experience a slight delay at the start of play when Output to DV Device is enabled with progressive projects.
➤
Bug Number: UDevC00117987. On certain slower machines, when playing in
MultiCamera mode, you might notice one or more cameras or the line-cut stutter a few seconds into the sequence. This happens most often when displaying the MultiCamera composite or line-cut to the client monitor on these older, slower systems. To help improve performance, Avid has provided a console command which allows you to pre-render more frames. This will slow down the start of play, but improve the overall playback performance.To increase the number of pre-render frames:
Perform the following:
1. Open the Console window by selecting Tools > Console.
2. In the Console command line, type the following command followed by the number of frames you want to pre-render: multicampreload 20
3. Press Enter (Windows) or Return (Macintosh). The value is saved. You do not need to reenter the command when you relaunch the editing application. To restore the default value, enter the command with no value.
➤
Bug Number: UDevC0088738. When you scrub a clip with “Fast Scrub” on, you might notice that when you stop scrubbing, the video continues to play in the record monitor. This might be more noticeable in HD projects or when you are working on shared storage. Fast scrub actually has a number of frames in flight while you drag the blue bar. The in process frames continue to play once you stop scrubbing.
➤
Bug Number: UDevC00103865. (Mojo DX) Currently, if you open a 24p PAL, 25p PAL or
720p 50 project and load a clip into the timeline and then play the clip, you may see frames drop.
Workaround: Set your project to an HD project type and then back to your 24p or 25p project. You only have to do this once per session.
➤
Bug Number: UDevC00026088. When you play media and then you press stop, the Source monitor stops, but the external client monitor steps back approximately 2 frames.
67
➤
Bug Number: . (Macintosh) QuickTime reference movies are useful as long as you are working with Avid media files available on your local system or in an Avid Unity environment. However, if you expect to move the exported QuickTime file to a system that doesn't have access to the media, then you should use the standard QuickTime export so the media files and QuickTime wrapper can be moved as one file.
➤
Bug Number: Udev00209633. With Full Screen Playback enabled on a single monitor, the video might stutter and you might notice tearing toward the top of the image during playback. Tearing might also appear if you use variable-speed play.
➤
Bug Number: . When the Avid editing application stops streaming play, a number of additional frames are sent to the DNA device in order to keep the client monitor synchronous with the desktop display. The DNA device must play out that number of frames after the desktop has stopped playing. To make sure you view the actual last frame, the application then snaps the client monitor back to the frame on the desktop. This might be more apparent when playing HD media.
➤
Bug Number: . If you do not see video output to your device, make sure that the appropriate device is selected in the Special > Device menu. If FireWire is selected in the Device menu, make sure Output to Device is selected in the Video Display Settings.
➤
Bug Number: Udev00141002. If you experience a flashing monitor when attempting to play using the Japanese version of Windows XP, and your monitor does not appear to be covered by anything, adjust the state of your Language bar by maximizing and minimizing it. This restores the ability to play.
➤
Bug Number: . (Adrenaline) LTC output is now off by default. To turn it on, open General
Settings and enable “Generate LTC On Playback.”
Projects
➤
Bug Number: UDevC00100476. The following project types do not support XDCAM or
HDV raster types:
• 1080p 23.976
• 1080p 25
The only raster type available for these formats is Standard.
➤
Bug Number: UdevC00025426. (Windows Only) Avid Attic folders can only be created by
Administrators. An Administrator has to first launch the application, open a project, close the project and quit the application. Then when a non-Administrator user uses the application, their work is saved to the Avid Attic.
68
Limitations and Known Issues
➤
Bug Number: UDevC00099790. You should note the following when transcoding media. If you have a project in one format, such as 1080i 50 and you add a supported progressive format to the clip such as 1080p 25, once you transcode the media, if you try to delete the clip, the clip contains both progressive and interlaced media. The delete dialog does not indicate that the clip you are trying to delete contains both progressive and interlaced media.
➤
Bug Number: UDevC00025979. For NewsCutter projects, you can only select base timecode (TC1) display formats in the Tracking Information menu. You can view other timecode formats in the Timeline window, but tracking information does not display above the Source/Record monitor except for the base timecode.
Settings
➤
Bug Number: UdevC00989750. If you take your user settings from your Adrenaline, Mojo or Software Only system forward to a system running with a Nitris DX, Fast scrub will be disabled. New user settings with a system running with a Nitris DX will have Fast Scrub enabled by default.
➤
Bug Number: UDevC00100486 . Currently, when saving toolsets, the bin position is not saved.
➤
Bug Number: . Do not carry User Profiles from a previous version to this version. Create new user settings. If you do use previous settings, the size of tools and windows might not be as expected, especially tools and windows that have been updated for this version.
Titles
➤
Bug Number: UDevC00133927. You cannot save a Marquee Title if you are a Standard
User. To workaround this issue:
Perform the following:
1. Log on as Administrator.
2. Navigate to Macintosh HD/Users/Shared/Avid Media Composer/
3. Select MarqueeTitles and select File > Get Info.
4. Select Sharing & Permissions.
5. Click the Padlock icon and enter an administrator password.
6. Click the button with the Gear icon at the bottom of the pane.
7. Choose Apply to enclosed items.
8. Select OK to apply the selected owner, group and permissions to the enclosed items dialog.
69
70
A standard user should now be able to write to the Marquee Titles directory.
➤
Bug Number: 0107356. (Macintosh) You might see vertical gray lines when you horizontally scroll the pages of a crawling title in Title Tool.
➤
Bug Number: UDevC00107065. (Macintosh) The background image might not display when editing an existing title from the Timeline.
Workaround: Either promote the title to Marquee, or modify the existing title from the bin.
➤
Bug Number: 106910. (Adrenaline) Currently, an image might appear distorted in the Title
Tool if you are in Draft or Best Performance play back mode.
Workaround: View the image in the Title Tool in Full Quality or Full Quality 10-bit mode.
➤
Bug Number: UDevC00054752. If you re-create a rolling or crawling title in your sequence, the Scroll Position parameter values for the first and last keyframes are not preserved. They are set to the default values (start and end).
Workaround: Promote the title to advanced keyframe model before you re-create.
➤
Bug Number: UDevC00047857. (Macintosh only) If you select the classic Title tool eyedropper and then quit the Avid application, the application hangs.
Workaround: Deselect the Title tool eyedropper before you exit the Avid application.
➤
Bug Number: UDevC00080610. Avid suggests that you do not attempt to edit the nested tracks of a re-created rolling or crawling title. If you attempt to select or edit one of these types of nested tracks, an error occurs. This is also the case with a re-created static title on its alpha channel subtrack.
➤
Bug Number: UDevC00080134. A sys_error occurs when you modify a title to an available drive with Render settings that are set to an unavailable drive (a drive that you do not have write access to). A .bak file of the title also appears in the bin.
Workaround: Close the Title tool and change the Render settings to a drive that you do have write access to.
➤
Bug Number: UDEV00218429. Character spacing might be inaccurate in Title Tool titles using large font sizes. Some character pairs might appear too close together, or overlapping.
In HD projects, the problem is only visible in the rendered title clip in the bin. In SD projects, the problem is visible immediately in the Title Tool. Also, once the problem has occurred in text using a large font size, it might persist when you create other text objects in the title at any font size.
Limitations and Known Issues
Workaround: The best general workaround is to promote the title to Marquee
®
. Text in
Marquee titles does not have the same problem at large font sizes. Also, if you do not need your final text to use a large font size, avoid converting it to a large font size at any point in your workflow, or retype it as a new text object at a smaller size if increasing the font size causes the problem.
➤
Bug Number: UDEV00218032. Marquee title format does not need to change in normal workflows. In most normal workflows, the title format in Marquee automatically matches the project format in your Avid editing application and you do not need to change it. If you change the title format in Marquee so that it does not match the project format in your editing application, you might see artifacts around the edges of some title objects. One situation in which you might need to change the Marquee title format occurs when you are creating a title by opening an existing .mqp file. If the .mqp file’s format does not match the project format in your Avid editing application, you should change the title’s format to match the project format in your editing application. For more information on changing the title format, see “Changing Title Formats” in the Marquee Help.
➤
Bug Number: UDEV00221549. When you render a rolling or crawling NTSC SD title with
Same as Source selected in the Media Creation dialog box in an HD project, you might see problems with the title.
Workaround: For highest quality titles, re-create your title media in the format of the project in which you are working; in this case, re-create your SD title media in an HD format.
➤
Bug Number: UDEV00189160. Unrendered back-to-back titles in a 1080i HDV sequence might not play in real time. The second title does not display.
Workaround: Render the titles.
➤
Bug Number: UDEV00162337. Rolling and crawling titles in 24p and 25p projects might display a “Layout Mismatch” error when in Full Quality mode.
Workaround: Select another quality mode. The error also goes away if you toggle to the
HD project equivalent and load the title.
➤
Bug Number: UDEV00163549. When you re-edit a Marquee title in the Timeline, you might see artifacts in the video background. This is cosmetic only and does not appear in the resulting title.
Workaround: If you reedit the title in the bin rather than the Timeline, the artifacts do not appear.
71
➤
Bug Number: UDEV00163010. For projects whose formats are changed to HD, if there are
Marquee crawls in sequences, these need to be modified to keep them as Avid DSK titles.
Reedit these titles by using the effect editor to bring up Marquee. If when saving to a bin in
Marquee you receive a message that the title is animated or that it cannot be saved directly to the Timeline, then perform the following workaround.
Workaround: Select the Crawl text box. Press the “C” toolbar button within Marquee to cause the crawling text box to extend for the new larger width of the title. Now you should be able to save to the bin or the Timeline as before and the title will not be animated.
➤
Bug Number: UDEV00161170. Page breaks appear on rolling and crawling titles when an
HD title is over SD media, or an SD title is over HD media.
Workaround: Recreate the title at the same resolution as the underlying video.
➤
Bug Number: UDEV00136646/UDEV00136165. HD titles appear aliased when you are not in Effect mode. Some titles you create in HD projects might look aliased (blocky) when you view them at Full Quality in Source/Record mode. To improve the visible quality, render the title or view it in Effect mode.
➤
Bug Number: UDEV00134561. The application might appear frozen after you edit a
Marquee title in the Timeline. If you edit a Marquee title that is already part of a sequence in the Timeline and then exit Marquee, you might not be able to perform any other operations.
Workaround: Press the Escape key. Use a different user setting to avoid the problem.
➤
Bug Number: UDEV00138188. Rolling titles created in SD and rendered in HD display 1 line at the top of the matte when they are rendered.
Workaround: Recreate the title and matte before you render.
➤
Bug Number: UDEV00135729. If you change the size of text, it might yield different kerning results. If you highlight text and change the text properties, the kerning result might be different than if you had changed the text properties in the Parent text box. For consistent results, change the text properties in the Parent text box.
➤
Bug Number: UDEV00140546, and UDEV00140564. When you edit large or unrendered
SD crawling or rolling titles in an HD project, switch to SD, promote the title to Marquee, save the title in SD, then open the title in HD.
This workaround is not possible for a 720p project, but you can open the 720p bin in a 30i project and modify the title there, as long as there is an SD version of the sequence.
72
Limitations and Known Issues
➤
Bug Number: UDEV00139482. Titles created in 4x3 SD and then re-created in 16x9 (SD or HD) appear to shift to the left. You must manually re-edit the title in 16x9 for correct positioning.
Workaround: In 16x9 mode, load the original 4x3 title in the Title tool. Click the Selection tool, select Edit > Select All, and then click Object-Group. Click Alignment > Center in
Frame Horiz. Save the title to the bin.
➤
Bug Number: UDEV00141084. You might receive an “Out of Range” error when you try to modify and then re-create rolling and crawling titles in the timeline in a 720p project.
Workaround: Manually re-edit the titles into the sequence.
XDCAM
➤
Bug Number: UDevC00120079. If you are working with the PDW U1 device and you have “Automatically Import Proxies when disk is inserted” selected in the XDCAM Import
Settings window, you will not receive the automatic prompt to import the proxy clips when the disk is inserted. For this device, you must manually import the proxy clips. The high resolution batch import process has not changed.
➤
Bug Number: UdevC00121377. (XDCAM writeback) If you export a 720p50 or 720p59 sequence with an odd number of frames, you will receive a message indicating the sequence needs an even number of frames to export successfully. Add or subtract a frame and perform the export again.
➤
Bug Number: UDevC00117308. You might experience dropped frames when playing back
XDCAM media with effects. When playing back media, a number of variables affect play performance; such as your CPU power, GPU power, sequence complexity and the raster settings. Depending on the complexity of your sequence, you might need to render some effects if you want to preview them in real time and at full quality, or before you can output a finished sequence.
➤
Bug Number: UDevC00116558. When you batch import XDCAM clips from a virtual volume, the system re-imports the proxy media into your bin. If you batch import XDCAM clips directly from the XDCAM disk, this works as intended. If you do not have access to the
XDCAM disk, Avid recommends that you import the hi-res XDCAM media when you import from a virtual volume and then edit your sequence.
➤
Bug Number: . When you import XDCAM files, be aware that Avid does not support the batch import workflow when you are working in the following Sony XDCAM camera modes: Picture Cache Record Mode, Interval Record Mode, or VFR (Variable Frame Rate)
Mode (UCC/OCC - Undercrank/Overcrank). An error message appears which informs you
73
that the video is not supported. However, the High-Rez versions of these clips can be imported. Their timecode values, however, will be inaccurate. The Avid editor appends its own generic timecode to clips recorded in any of the previously mentioned modes.
➤
Bug Number: UdevC00164589. XDCAM proxy media will not export to a QuickTime reference movie. This is a limitation for all long-GOP media types.
If you export as a regular QuickTime movie, MPEG 4, or as Windows Media 9, the export is successful. Or, you can transcode the proxy sequence to DV 25 or MPEG-IMX and then export as QuickTime reference.
Workaround: Import the whole XDCAM HD clip and then transcode it.
➤
Bug Number: UdevC00078552. The Avid editing applications refer to XDCAM HD 25
Mbits media files as HDV 1080i 50/60. These Dynamic Relink settings are only available in project types 1080i/59.94 HDV or 1080i/50 HDV.
Extending Your Usable Address Space and Adding
RAM for Improved Performance (Windows)
The Microsoft Windows XP and Windows Vista 32-bit operating systems limit every program to 2 gigabytes (GB) of address space. It reserves the remaining 2 gigabytes of address space for its own use. The operating system includes a boot-time mechanism that allows applications access to a larger virtual address space than was previously available.
Avid provides a utility for setting the boot-time mechanism to extend the process address space.
For Microsoft Windows XP and Windows Vista 64-bit operating systems, applications are allocated an address space well beyond the 2-gigabyte limit allocated by the 32-bit operating systems. No utility is needed to tell the 64-bit operating systems to allocate additional memory for the applications.
Setting your Avid editing system to access a larger virtual address space might improve working with HD projects without running out of memory. Even though you might gain more memory space, this can be quickly consumed with bins and complex HD effects. For best performance, if you choose to extend your address space beyond 2 gigabytes, you should install an additional 1 or 2 GB of RAM.
Using Install3GB.exe to Extend Your Usable Address Space
It is not necessary to run this executable on Windows Vista 64 systems. Perform this procedure on Windows Vista 32 systems or Windows XP systems.
74
Documentation Changes
To extend the application address space:
1. Double click the Install3GB.exe file in the Utilities\3G folder where the Avid application is installed.
A window opens. You must have administrative privileges to run this utility.
n
The hardware and software configuration you are running, for example, Nitris DX, Nitris,
Mojo, Mojo DX, or Adrenaline, determines the amount of memory you should allocate for the application address space.
2. Type the amount of memory you want to allocate for the application space at the prompt. The recommended settings are:
2700 for Mojo and Adrenaline
2700 for Mojo DX and Nitris DX
2500 for Symphony Nitris Classic
2700 for Software Only systems
Install3GB updates the current configuration you are running. It does not create another one.
After pressing any key the window closes and you will need to reboot the computer.
Restoring the Original Configuration
You can restore the system to the original configuration.
To restore the configuration:
1. Run the Install3GB.exe as described in
“Using Install3GB.exe to Extend Your Usable
2. Type 0 (zero) for the memory setting.
This removes the “userva” setting in the boot configuration.
3. Reboot the system.
Documentation Changes
The following change has occurred since the print documentation was completed.
You will not receive Keycap labels with the current shipping Avid editor product kits. The
Keycap labels have been removed from the product kits due to branding changes. We apologize for any inconvenience.
75
Avid Nitris DX REF Sync Update
The second version of the Avid Nitris DX hardware device was released with changes made to the REF SYNC connections. The new connections are: REF1 SYNC and REF2 SYNC.
These changes were not included in current documentation.
You can still follow the instructions to connect a Blackburst or Tri-level device with the loopthrough method, but in newer Avid Nitris DX devices you can also connect both a
Blackburst and a Tri-level device at the same time. This allows you to choose which device you want to use in the Video Output Tool (REF 1 or REF 2), without having to physically disconnect any cable from your Nitris DX. When you connect to the Avid Nitris DX, the
Avid editing application detects the connections and displays the appropriate menu choices in the Video Output tool Sync Lock menu.
Documentation should include the following changes:
In the Help topic, “Video I/O Connectors for Avid Nitris DX,” should include the following writeup for Number 11 REF SYNC:
Number Label
11 REF SYNC
REF 1 SYNC
REF 2 SYNC
Connector
Type Function
BNC (2)
BNC (2)
Input and Output. Accepts either Blackburst or Tri-level.
These two sync connections provide a sync input with passive loop-through. Either connection can be used for input but the other connection must be terminated externally or connected to a terminated piece of equipment.
Depending on the version of Avid Nitris DX, REF 1 and
REF 2 appear. Accepts both Blackburst and Tri-level.
You can use the above method for REF SYNC, or you can connect both a Blackburst and a Tri-level to the REF
1 and REF 2 connectors. You can switch between both devices without having to disconnect the cable. No need to terminate.
In the Help topic, “Video Output Tool Settings: Options Tab,” should include the following writeup for Sync Lock:
76
Documentation Changes
Option
Sync Lock
Description
Use this feature to lock your output connection to the reference or an internal signal on the Avid input/output hardware. The Avid editing application detects the type of Avid input/output hardware you have and displays the appropriate options.
• Internal
• Reference
• REF 1
• REF 2
• TriLevel (on some models, TriLevel Sync is automatically detected and does not appear as an option)
• Loop through
Ancillary Data Note
The following note was inadvertently left our of the Help topic “Preserving HD Closed
Captioning and Ancillary Data”:
The following requirement is necessary when preserving ancillary data: Ancillary data can only be preserved when it resides on the V1 video track.
16 Tracks of Audio in the Audio Mixer Tool
Previously, you were limited to 8 tracks of audio in the Audio Mixer tool. You can now have
16 tracks of audio in the Audio Mixer tool.
Controlling Character Mapping for Title Text
(Windows Only) Recent versions of Avid editing applications use different default character mappings from older versions. Some text objects might not display correctly when you open or edit them in the current version of your application. In particular:
• Greek text objects created in older versions do not display correctly in recent versions
• Certain characters, such as superscripts or other characters you enter using Alt key sequences, might not display correctly
If you experience these problems, you can switch to the older, “classic” character mappings.
77
To turn classic character mapping on or off:
1. Make sure that the Title Tool is closed.
2. In the Settings tab of the Project window, double-click Interface.
The Interface Settings dialog box opens.
3. Click the General tab.
4. Select or deselect “Use Classic Character Mapping.”
5. Open the Title Tool, switch to a different font, and then switch back to the font you need.
This action clears any cached font information and ensures that the character mapping change takes effect.
1080p/29.97 Project Format
Previously, the 1080p/29.97 project was only available on editing applications with
Nitris DX or Mojo DX hardware. With this release of the editing application, the
1080p/29.97 project is also available for software only systems. If you working on an Avid editing application with an Adrenaline system and you choose the 1080p/29.97 project format, you will receive the following message. “This project format is not supported with this hardware. We will switch to Software Only mode.” You will not have access to the
Adrenaline while in this project format. Once you select another project format, you will regain access to the Adrenaline hardware.
Non-Core AudioSuite Plug-ins
The online Help and the Advanced Guide reference Non-Core AudioSuite Plug-ins in the
Goodies folder. Non-core AudioSuite plug-ins are not included in the Goodies folder. You must download Non-core AudioSuite plug-ins from the digidesign.com Web site.
Importing Proxy Media
Avid's feature “Avid Media Access (AMA)” allows you to link directly to P2, XDCAM, or
XDCAM EX media. However, if you want to import XDCAM proxy media, you need to turn off AMA. See “Selecting the AMA Settings” in the Help for information on deselecting this option, and then follow the steps in the Help topic “Importing Proxy Media from an
XDCAM Disc.”
For more information about AMA and Importing and Exporting, see the section on “File
Based Media” in the Help or in the Advanced Guide .pdf of your Avid editing system.
78
Legal Notices
Sample Rate Conversion and Audio Import
When you import audio to your project, you have the option of converting the sample rate of the source audio files to the project sample rate. You select this option on the Audio tab of the Import settings dialog box (see “Import Settings: Audio Tab” in the Help). The default setting is to convert all files, which means that your Avid editing application converts the sample rate of source files to the project sample rate when it imports the file to your project.
If you deselect this option, your editing application imports the files at the source sample rate.
If you choose to convert your source sample rates when importing audio files, you also have the option to skip the conversion of files recorded with pullup or pulldown sample rates. This option affects the import process in the following ways:
• Skipping the sample rate conversion of audio files with .1% pullup or pulldown sample rates imports the files, bit for bit, with no change to the source audio file. The Avid editing application marks the imported files with non-pullup or non-pulldown sample rates, and the length and pitch of the imported audio changes by plus or minus .1%. For example, a source audio file with a 48048 sample rate is marked on import with a 48000 sample rate, and it plays back .1% slower than audio with a converted sample rate.
Because no conversion occurs, importing the files proceeds quickly. This is the default setting.
• Converting audio files with pullup or pulldown sample rates results in imported files with the project sample rate. The length and pitch of the imported audio matches the length and pitch of the source audio. Because the editing application must convert the sample rates, importing these files proceeds less quickly than it does when skipping the sample rate conversion.
If you choose not to convert any sample rates when you import audio files, the editing application imports the audio files at the source sample rate. This leaves the audio source files unchanged, but the application marks any source files with pullup or pulldown sample rates with non-pullup or non-pulldown sample rates, and the length and pitch of the imported audio changes by plus or minus .1%. Again, this means that a source audio file with a 48048 sample rate is marked on import with a 48000 sample rate, and it plays back .1% slower than audio with a converted sample rate.
Legal Notices
Product specifications are subject to change without notice and do not represent a commitment on the part of Avid Technology,
Inc.
This product is subject to the terms and conditions of a software license agreement provided with the software. The product may only be used in accordance with the license agreement.
79
80
Avid products or portions thereof are protected by one or more of the following United States Patents: 5,077,604; 5,267,351;
5,309,528; 5,355,450; 5,396,594; 5,440,348; 5,467,288; 5,513,375; 5,528,310; 5,557,423; 5,568,275; 5,577,190; 5,584,006;
5,634,020; 5,640,601; 5,644,364; 5,654,737; 5,715,018; 5,719,570; 5,724,605; 5,726,717; 5,729,673; 5,745,637; 5,752,029;
5,754,180; 5,754,851; 5,799,150; 5,812,216; 5,828,678; 5,842,014; 5,852,435; 5,905,841; 5,929,836; 5,930,445; 5,946,445;
5,986,584; 5,987,501; 6,016,152; 6,018,337; 6,023,531; 6,058,236; 6,061,758; 6,091,778; 6,105,083; 6,118,444; 6,130,676;
6,134,607; 6,141,691; 6,198,477; 6,201,531; 6,223,211; 6,249,280; 6,269,195; 6,330,369; 6,351,557; 6,353,862; 6,357,047;
6,392,710; 6,404,435; 6,407,775; 6,417,891; 6,426,778; 6,477,271; 6,489,969; 6,512,522; 6,532,043; 6,546,190; 6,552,731;
6,553,142; 6,570,624; 6,571,255; 6,583,824; 6,618,547; 6,636,869; 6,665,450; 6,678,461; 6,687,407; 6,704,445; 6,747,705;
6,763,134; 6,766,063; 6,791,556; 6,810,157; 6,813,622; 6,847,373; 6,871,003; 6,871,161; 6,901,211; 6,907,191; 6,928,187;
7,043,058; 7,081,900; 7,103,231; 7,266,241; 7,280,117; RE40,107; 7,403,561; 7,433,519; 7,512,885; 7,545,957; D352,278;
D392,267; D392,268; D392,269; D395,291; D396,853; D398,912. Other patents are pending.
Avid products or portions thereof are protected by one or more of the following European Patents: 0506870; 0515031;
0635188; 0674414; 0694243; 0705517; 0752174; 0857293; 0976108; 0988756; 1068723; 1068734; 1111910; 1173850;
1629675. Other patents are pending.
Avid products or portions thereof are protected by one or more of the following United States Patents: 5,077,604; 5,267,351;
5,309,528; 5,355,450; 5,396,594; 5,440,348; 5,467,288; 5,513,375; 5,528,310; 5,557,423; 5,568,275; 5,577,190; 5,584,006;
5,634,020; 5,640,601; 5,644,364; 5,654,737; 5,715,018; 5,719,570; 5,724,605; 5,726,717; 5,729,673; 5,745,637; 5,752,029;
5,754,180; 5,754,851; 5,799,150; 5,812,216; 5,828,678; 5,842,014; 5,852,435; 5,905,841; 5,929,836; 5,930,445; 5,946,445;
5,986,584; 5,987,501; 5,999,406; 6,016,152; 6,018,337; 6,023,531; 6,038,573; 6,058,236; 6,061,758; 6,069,668; 6,091,778;
6,105,083; 6,118,444; 6,130,676; 6,134,607; 6,141,007; 6,141,691; 6,198,477; 6,201,531; 6,211,869; 6,223,211; 6,249,280;
6,269,195; 6,330,369; 6,351,557; 6,353,862; 6,357,047; 6,392,710; 6,404,435; 6,407,775; 6,417,891; 6,426,778; 6,477,271;
6,489,969; 6,512,522; 6,532,043; 6,546,190; 6,552,731; 6,553,142; 6,570,624; 6,571,255; 6,583,824; 6,596,031; 6,618,547;
6,636,869; 6,665,450; 6,678,461; 6,687,407; 6,704,445; 6,747,705; 6,763,134; 6,763,523; 6,766,063; 6,766,357; 6,791,556;
6,810,157; 6,813,622; 6,847,373; 6,871,003; 6,871,161; 6,901,211; 6,907,191; 6,928,187; 7,043,058; 7,081,900; 7,103,231;
7,266,241; 7,280,117; RE40,107; 7,403,561; 7,433,519; 7,512,885; 7,545,957; D352,278; D372,478; D373,778; D392,267;
D392,268; D392,269; D395,291; D396,853; D398,912. Other patents are pending.
Avid products or portions thereof are protected by one or more of the following European Patents: 0506870; 0515031;
0635188; 0674414; 0694243; 0705517; 0752174; 0857293; 0895623; 0976108; 0988756; 1068617; 1068723; 1068734;
1111910; 1173850; 1629675. Other patents are pending.
No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose without the express written permission of Avid Technology, Inc.
Copyright © 2009 Avid Technology, Inc. and its licensors. All rights reserved.
Attn. Government User(s). Restricted Rights Legend
U.S. GOVERNMENT RESTRICTED RIGHTS. This Software and its documentation are “commercial computer software” or
“commercial computer software documentation.” In the event that such Software or documentation is acquired by or on behalf of a unit or agency of the U.S. Government, all rights with respect to this Software and documentation are subject to the terms of the License Agreement, pursuant to FAR §12.212(a) and/or DFARS §227.7202-1(a), as applicable.
Trademarks
003, 192 Digital I/O, 192XD I/O, 888 I/O, AirPlay, AirSPACE, AirSPACE HD, AirSpeed, ALEX, Alienbrain, AniMatte,
AudioMarket, AudioPages, AudioSuite, AudioVision, AutoSync, Avid, Avid Advanced Response, Avid DNA, Avid DNxcel,
Avid DNxHD, AVIDdrive, Avid DS Assist Station, Avid EditStar, Avid Learning Excellerator, Avid Liquid,
Avid Liquid Chrome Xe, Avid MEDIArray, Avid Mojo, AvidNet, AvidNetwork, Avid NewStar, Avid Remote Response,
AVIDstripe, Avid Unity, Avid Unity ISIS, Avid VideoRAID, Avid Xpress, AVoption, AVX, Beauty Without The Bandwidth, Boom,
C|24, CaptureManager, ChromaCurve, ChromaWheel, Command|24, Conectiv, CountDown, DAE, Dazzle,
Dazzle Digital Video Creator, Deko, DekoCast, D-Fi, D-fx, DigiDelivery, Digidesign, Digidesign Audio Engine,
Digidesign Intelligent Noise Reduction, DigiDrive, DigiLink, DigiMeter, DigiSerial, DigiStudio, DigiStudio Control,
Digital Nonlinear Accelerator, DigiTranslator, DINR, DNxchange, do more, DVD Complete, D-Verb, Eleven, Equinox,
EveryPhase, ExpertRender, Fastbreak, Fast Track, FieldPak, Film Composer, FilmScribe, Flexevent, FluidMotion, FXDeko,
G7, G-Rack, HD Core, HD Process, HDPack, HYBRID, HyperControl, HyperSPACE, HyperSPACE HDCAM, IllusionFX,
Image Independence, iNEWS, iNEWS Assign, iNEWS ControlAir, Instantwrite, Instinct,
Intelli-sat Broadcasting Recording Manager, Intelli-Sat, InterFX, Interplay, inTONE, Intraframe, iS9, iS18, iS23, iS36, ISIS,
IsoSync, KeyRig, KeyStudio, LaunchPad, LeaderPlus, Lightning, ListSync, Lo-Fi, Magic Mask, Make Anything Hollywood, make manage move | media, Marquee, M-Audio, M-Audio Micro, Maxim, Mbox, MCXpress, Media Browse, Media Composer,
MediaDock, MediaDock Shuttle, Media Fusion, Media Illusion, MediaLog, Media Reader, Media Recorder, MEDIArray,
MediaShare, MediaStream, Media Suite, Meridien, MetaFuze, MetaSync, MicroTrack, Midiman, MissionControl, Mix Rack,
MixLab, Moviebox, Moviestar, NaturalMatch, Nearchive, NetReview, NewsCutter, Nitris, NRV-10 interFX, Octane, OMF,
OMF Interchange, OMM, OnDVD, Open Media Framework, Open Media Management, Palladium, Pinnacle,
Pinnacle DistanTV, Pinnacle Geniebox, Pinnacle HomeMusic, Pinnacle MediaSuite, Pinnacle Mobile Media, Pinnacle Studio,
Pinnacle Studio MovieBoard, Pinnacle Systems, ProEncode, ProServices, ProSessions, Pro Tools, QuietDrive, Recti-Fi,
Reel Tape Delay, Reel Tape Flanger, Reel Tape Saturation, RetroLoop, rS9, rS18, Salesview, Sci-Fi, Scorch, Scorefitter,
Legal Notices
ScriptSync, SecureProductionEnvironment, Session, Show Center, Sibelius, SIDON, Soft SampleCell, Soft-Clip Limiter,
Sound Designer II, SPACE, SPACEShift, SpectraGraph, SpectraMatte, Sputnik, Starplay, SteadyGlide, Streamfactory,
Streamgenie, StreamRAID, Strike, Structure, Studiophile, SubCap, Sundance Digital, Sundance, Symphony, SYNC HD,
SynchroScience, SynchroScope, Syntax, TDM FlexCable, Thunder, Titan, Titansync, TL Aggro, TL AutoPan, TL Drum Rehab,
TL Everyphase, TL Fauxlder, TL In Tune, TL MasterMeter, TL Metro, TL Space, TL Utilities, Torq, Torq Xponent, Transfuser,
Trigger Finger, Trillium Lane Labs, TruTouch, UnityRAID, Vari-Fi, Velvet, Venom, VideoRAID, Video Slave Driver, VideoSPACE,
VideoSpin, Vortx, Xdeck, X-Form, Xmon, Xponent, and X-Session are either registered trademarks or trademarks of Avid
Technology, Inc. in the United States and/or other countries.
Adobe and Photoshop are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Apple and Macintosh are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. All other trademarks contained herein are the property of their respective owners.
Avid Media Composer ReadMe • Part Number 0130-30219-01E • 12/11/09
81
82
advertisement
Key Features
- LTC timecode support
- DNxHD codec support
- Software licensing
- Hardware and software compatibility
- Troubleshooting
Frequently Answers and Questions
How do I add LTC Out During Preroll?
How to update to the latest codec files?
What are the minimum system requirements for Avid Media Composer v4.0.5?
Related manuals
advertisement
Table of contents
- 1 Title Page
- 2 Symbols and Conventions
- 3 If You Need Help
- 4 Changed in v4.0.5
- 4 Adding LTC Out During Preroll
- 5 LTC Output During Digital Scrub (When Using Nitris DX only)
- 5 Updates to AMA
- 5 Changes to High-Quality Scaling for Real-Time Decode
- 6 Support for Macintosh Editor Clients in an Interplay Environment
- 6 Fixed in v4.0.5
- 7 Changed in v4.0.4
- 8 Activating and Deactivating the Client Monitor Display
- 9 Fixed in v4.0.4
- 10 Fixed in v4.0.3
- 11 Fixed in v4.0.2
- 12 Changed in v4.0.1
- 12 Before You Install the Editing Application
- 12 Existing Editor Upgrades
- 13 Notes on Windows Vista OS
- 13 Disabling Desktop Compositing
- 13 User Access Control Setting
- 14 Standard User
- 14 Windows Vista Windows Sidebar
- 14 New Folder Structure
- 15 Cleaning up Old Folders Before Installation
- 15 Installing the Software
- 17 Firmware Update Note
- 17 Notes on Software Licensing
- 17 Activating Your Avid Editing Application
- 18 If You Upgrade Your Operating System
- 18 Laptop Network Settings
- 18 Using the GetLicenseInfo Utility
- 19 Codec Update
- 19 Installing Updated Codec Files
- 20 Supported Hardware and Operating Systems
- 20 Supported PC Workstations with Avid Media Composer
- 22 Supported PC Notebooks for Avid Media Composer
- 24 Supported Macintosh Workstations for Avid Media Composer
- 25 Supported Macintosh Notebooks for Media Composer
- 25 Required Hotfix Info
- 26 Compatibility Chart
- 29 Audio Device Compatibility with Avid Editing Applications and Pro Tools
- 29 Co-Install Supported Configurations
- 31 Audio Device Supported Configurations
- 32 Using External Fader Controllers
- 33 Setting up the NVIDIA Card
- 34 Disabling the NVIDIA Driver Helper Service (Windows XP)
- 35 Shared Storage Support
- 35 New in Avid Media Composer v4.0
- 35 What’s New
- 36 Limitations and Known Issues
- 36 AMA (Avid Media Access)
- 38 Audio
- 39 Audio Punch-In Tool
- 39 Avid Unity
- 40 Capture
- 43 Compatibility
- 47 Digital Cut
- 49 Dynamic Relink
- 49 Effects
- 53 Effects (Pan & Zoom)
- 54 Export
- 57 ICS (International Character Support)
- 57 Import
- 58 Installation
- 58 Interplay Workgroup
- 60 Force Disconnect Client Mode in an Interplay Environment
- 62 JVC
- 62 Locators
- 63 Mixed Frame Rate and Field Motion Types
- 64 Panasonic
- 66 Play
- 68 Projects
- 69 Settings
- 69 Titles
- 73 XDCAM
- 74 Extending Your Usable Address Space and Adding RAM for Improved Performance (Windows)
- 74 Using Install3GB.exe to Extend Your Usable Address Space
- 75 Restoring the Original Configuration
- 75 Documentation Changes
- 76 Avid Nitris DX REF Sync Update
- 77 Ancillary Data Note
- 77 16 Tracks of Audio in the Audio Mixer Tool
- 77 Controlling Character Mapping for Title Text
- 78 1080p/29.97 Project Format
- 78 Non-Core AudioSuite Plug-ins
- 78 Importing Proxy Media
- 79 Sample Rate Conversion and Audio Import
- 79 Legal Notices