OWNERS MANUAL
www.CookWithKenyon.com
REMOTE CONTROL ELECTRIC GRILL
OWNERS MANUAL
Part # 143735
Created: 7/9/2014
Revised: 8/6/2014
Table of Contents
Section
Page
Important Safeguards ..............................................................................................................3
How to Use Grill
Quick Start Tips ............................................................................................................... 4
Stuffed French Toast ....................................................................................................... 7
Product Specifications .............................................................................................................8
Installation Instructions
Package Contents ........................................................................................................... 9
Electrical Requirements .................................................................................................10
Countertop Installation ...................................................................................................10
Drain Connection ...........................................................................................................13
Outlet Location ...............................................................................................................13
Final Preparations Prior to Use ......................................................................................13
Operation of Grill
Touch Control .................................................................................................................15
Power Cord ....................................................................................................................18
Grill Parts .......................................................................................................................19
Lid Removal ...................................................................................................................20
Warranty Information .............................................................................................................21
Kenyon International, Inc.
8 Heritage Park Road
P.O. Box 925
Clinton, CT 06413 USA
Phone: 860-664-4906
Fax: 860-664-4907
www.CookWithKenyon.com
2
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed
including the following:
1. Read ALL instructions prior to using product.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against electrical shock, do not immerse cord or plugs in water or other liquid.
4. Close supervision is necessary when any appliances are used near children.
5. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking
off parts.
6. Do not operate appliance with a damaged power cord or plug. If the appliance malfunctions,
discontinue use and contact the nearest authorized appliance dealer or the factory for examination,
repair or adjustment.
7. The use of accessory attachments not supplied by the manufacturer of the appliance may cause
injuries.
8. When used as a portable grill, store indoors when not in use. When used as a built-in grill, suitable
shelter must be provided to prevent direct exposure to rain. Covers available.
9. Do not let cord hang over edge of table or counter, or touch hot surfaces.
10. Do not place on or near a hot gas or electric burner, or in a heated oven.
11. Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
12. Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any
control to “off”, then remove plug from wall outlet.
13. Do not use appliance for other than intended use.
14. Always place a minimum of one (1) cup of water in disposable drip tray prior to grilling.
15. Never leave children alone - children should not be left unattended around the grill at any time.
16. Allow the grill to cool before taking off cooking grates, disposable drip tray or lids.
17. Fuel, such as charcoal briquettes, are not to be used with this appliance.
18. Ensure grill is installed per instructions and properly grounded by a qualified electrician.
19. Do not replace or attempt to repair any part of the grill, unless otherwise noted in this manual.
All other service is to be performed by a factory authorized technician.
20. Do not use water to extinguish a grease fire, use dry chemical fire extinguisher.
21. Do not store flammable materials near the grill.
22. Do not wear loose fitting or hanging apparel when using the grill.
PLEASE READ THESE INSTRUCTIONS IN THEIR
ENTIRETY BEFORE INSTALLATION AND USE.
SAVE THESE INSTRUCTIONS
3
Q U I C K
S TA R T
T I P S
Thank you for purchasing the World’s Finest All Seasons® Electric Grill!
There are a few simple
steps you can take to ensure your good decision will lead to years of World-Class Grilling:
1.
Remove grate(s) and drip tray(s), clean both.
2. Insert the drip tray(s) into the bottom of grill. Make sure the burner brackets are not
resting on the drip tray(s).
VISIT OUR WEBSITE
to purchase recipe books, cooking utensils,
griddles, grill covers, and more!
3. Always fill the drip tray(s) with 16 oz. of liquid. Water will work, but why not try beer or
wine to add flavor to your favorite food. Then re-install cooking grate.
4. Depending on model, either hardwire your Kenyon All Seasons® Grill or plug it directly into
an outlet, do not use extension cords.
5. Preheat grill for 5 to 9 minutes on high (8 bars). Adjust heat setting for type of food,
for example:
-Vegetables 3-4 bars
-Pork and fish 4-5 bars
-Burgers 6-7 bars
-Steak 7-8 bars
6. Close lid and cook. Enjoy the best grilled food you have ever tasted!
7. Once your grilling session is complete, grab a wet paper towel and wipe down your grate.
Once cool, place in the dishwasher along with the dirty dishes so that it’s ready for its
next tour of duty!
8. While the grate is in the wash, don’t forget to clean out the drip tray contents.
You don’t want your previous juices to flavor your next meal.
Scan with
smartphone
www.CookWithKenyon.com | 860.664.4906 |
THE ABOVE INSERT IS
AFFIXED TO THE GRATE .
PLEASE READ INSERT AND
REMOVE PRIOR TO GRILL USE.
4
REMOVE & READ PRIOR TO GRILLING
HOW TO USE GRILL
1. Before using your grill, remove the cooking grate and drip tray from the grill. Wash the
grill with warm soapy water using a non-abrasive cloth. USE ONLY HIGH TEMP PLASTIC
UTENSILS WHEN GRILLING. Visit our web site to purchase a set of high quality stainless steel/
high temp plastic grill utensils, www.cookwithkenyon.com.
2. Make sure the drip tray is inserted all the way into the bottom of grill and
electric element brackets are resting on the element support bracket.
3. Cover the bottom of the drip tray with a liquid. Water is fine. PLEASE
DO NOT USE A FLAMMABLE LIQUID! Doing so
would ruin your cookout. Using apple juice if you are
grilling pork adds a nice flavor to the meat. A can of
lime soda is wonderful if you are grilling fish. Try any
kind of liquid that you enjoy drinking. Just remember always add liquid
to the drip tray prior to grilling.
4. To keep your grill smoke free, always clean the grilling surface
after each use. Simply wash with warm soapy water using a
non-abrasive cloth or place in your dishwasher. Empty the drip
tray and wipe with a damp paper towel. The drip tray can be used
multiple times before replacement is necessary.
5. Place your cooking grate or optional griddle (part #B96000) onto the element with drip tray
installed. Use the griddle for foods such as eggs, pancakes or my favorite - stuffed french toast!
6. Preheat grill for 5 to 9 minutes on high (8 bars illuminated). Adjust heat setting for type of food.
• Steak 7-8 bars
• Hamburgers 6-7 bars
• Pork and fish 4-5 bars
• Vegetables 3-4 bars
7. Close the lid and cook. Enjoy the best grilled food you have ever tasted!
8. Clean up. This is easy to do as you will soon learn. After the grill has cooled to the touch, take
a few pieces of paper towel and place on the grilling surface. Pour about one ounce of water on
the towel and then using your high temperature nylon tongs, swab the paper toweling back and
forth to loosen up the residue from your grilling. Throw the paper towel away and wipe the grate
off with a dry paper towel.
9. Once the grate has cooled sufficiently, remove the grate and place in your dishwasher for a
thorough cleaning.
10. With the grate removed, lift up the electric element and remove the drip tray. Empty the
contents of the drip tray in an appropriate place, please don’t pour it on your neighbors lawn.
Wipe the tray out with a dry paper towel and reuse the tray. The tray can last for many uses.
11. Every 7-8 uses, you may want to wash the lid. They can be placed in your dishwasher and
run on the pots & pans cycle. This will restore your grill to its original pristine look.
5
12. To clean the grill, first be sure the cooking surface has cooled enough to handle. Then
remove the grate, lift up the electric element until it locks in the up position, then the drip tray.
13. Wipe the stainless steel surfaces with a damp cloth to remove any residue from previous
grilling sessions.
14. Your Kenyon grill comes with a sample bottle of stainless steel cleaner.
Use this cleaner once a month to keep your grill looking like new.
15. The touch control area is ceramic glass which is sealed from the effects
of rain, snow and ice. To clean the glass, use a glass cleaner and soft towel.
If stains appear, use a ceramic glass cleaner which can be found in your local
grocery store.
6
Stuffed French Toast
16 slices
1 lb.
½ cup
4 T.
Thin Sliced Bread “any kind but not the white stuff”
Cream Cheese (softened)
Peach Preserves (or your favorite)
Butter
French Toast Batter:
5
Large eggs thoroughly beaten
1 cup Milk
1 T. Cinnamon, ground
½ t. Allspice, ground
½ t. Coriander, ground
2 oz. Water (Dark Rum, Optional)
In a large bowl, place the eggs and beat with a wire whisk. Add the milk and beat again
until incorporated. In a separate smaller bowl pour water or Rum (if you prefer) and add dry
ingredients, mix thoroughly. Once the dry ingredients have been mixed, add to the egg and milk
mixture and beat again until mixed. By doing this you avoid the clumps that come with making
batter.
Method of Preparation:
This will require the use of your griddle. Preheat your ‘All Seasons® Grill’ on medium high heat
(6 bars) for approximately ten minutes.
Once the cream cheese has softened, mix with the peach preserves. Divide equally onto eight
slices of bread and spread evenly. Place the remaining eight slices on top to make a sandwich.
When your griddle has been preheated, add two tablespoons of butter and move around to coat
the griddle. Reserve the rest of the butter for the remaining pieces of French Toast. Take the
sandwich and dip into the mixture and flip it over to coat both sides of your bread.
Quickly do this to three more “sandwiches”. You will now have four pieces of stuffed French Toast
on your griddle.
Be careful not to burn. Flip the sandwiches over and continue cooking until both sides are
browned nicely.
At this point you either serve with some nicely warmed maple syrup and butter, or you can keep
warm in a low oven until you finish the remaining pieces of French Toast.
7
PRODUCT SPECIFICATION
4
2
3
1
Frontier Remote Control
Model B70300 - 120V AC - 1300 WATTS - 11 AMPS
Model B70301 - 240V AC - 1300 WATTS - 6 AMPS
Overall dimensions: 18” x 12” x 5” (8 1/2” with lid)
457.2mm x 304.8mm x 127mm (216mm with lid)
Cutout dimensions: 17” x 11 1/2” with 1/4” radius corners
431.8mm x 292mm with 6.4mm radius corners
16"
Portable with Reduced Height Lid
1/2"
Model B70310 - 120V AC - 1300 WATTS - 11 AMPS
Model B70311 - 120V AC - 1300 WATTS - 11 AMPS
16 9/16"
Overall dimensions: 18 3/4” x 12 7/8” x 7 3/4”
18"
276.3mm x 327mm x 196.9mm
D
C
B
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
ANGULAR: MACH 0.50
BEND 1.00
TWO PLACE DECIMAL
.010"
THREE PLACE DECIMAL
.005"
MATERIAL
USED ON
APPLICATION
4
NAME
DATE
TAV
1/2010
TITLE:
CHECKED
ENG APPR.
KENYON INTERNATIONAL
8 HERITAGE PARK - PO BOX 925
CLINTON, CT 06413
Sm Grill w/ Remote Control
MFG APPR.
A
No Lid Remote Control
B B70300 & B70301Model B70360 - 120V AC - 1300 WATTS - 11 AMPS
Model B70361 - 240V AC - 1300 WATTS - 6 AMPS
Model B70362 - 120V AC - 1300 WATTS - 11 AMPS
Overall dimensions: 18” x 12” x 5”
457.2mm x 304.8mm x 127mm
Cutout dimensions: 17” x 11 1/2” with 1/4” radius corners
431.8mm x 292mm with 6.4mm radius corners
INTERPRET GEOMETRIC
TOLERANCING PER: ANSI
NEXT ASSY
DRAWN
Q.A.
COMMENTS:
SIZE DWG. NO.
REV
FINISH
3
SHEET 1 OF 3
SCALE: 1:5 WEIGHT:
DO NOT SCALE DRAWING
2
1
8
INSTALLATION
Package Contents
Your All Seasons® Remote Grill is assembled and ready for use. Before you use the grill write
your unit’s serial number here for future reference: _________________. The serial number can
be found on the short side of the grill at the end with the glass control panel. The serial number
consists of six digits.
Included in the shipping container is the All Seasons® Remote Grill, four (4) mounting screws,
three (3) feet of drain hose, elbow fitting and drain hose for built-in only, remote control, cable
assembly, manual and stainless steel cleaner. Portable grill drain fitting comes with a plug.
If portable grill owners would like to install elbow fitting and hose instead of plug please contact
KENYON.4 If any components are3 missing or damaged, 2call KENYON immediately.
1
D
C
16"
Fig. 1
1/2"
B
16 9/16"
18"
UNLESS OTHERWISE SPECIFIED:
9
NAME
DATE
KENYON INTERNATIONAL
8 HERITAGE PARK - PO BOX 925
Electrical Requirements
Check the Electrical Supply Requirements
This product must be installed in accordance with national, state and local electric codes.
The following table provides the correct voltage, amperage and frequency that must be supplied
to the grill.
The supply must be from an individual grounded circuit that is protected by a circuit breaker and
rated per the specifications for the model as shown in the table below.
KENYON
Part #
B70300
B70310
B70360
B70362
B70301
B70311
B70361
Max Load
Power Supply
1300 Watts
120V AC 11A 60Hz
1300 Watts
240V AC 6A 60Hz
Plug Type
Cord Dimension
3 prong cord with GFCI
3 prong cord
3 prong cord with GFCI
3 prong cord
86” (2184mm)
63” (1600mm)
86” (2184mm)
63” (1600mm)
3 wire cord no plug
67” (1702mm)
WARNING:
If the electrical supply does not meet the product specifications, consult with a
licensed electrician before proceeding with installation!
Do not remove the GFCI device from the supplied power cord under any circumstances.
Countertop Installation
Your All Seasons® Grill and remote are supplied with a factory installed polished stainless steel
flanges that accept oval head wood screws for mounting. The trim flanges of the grill and control
are designed to hold the unit firmly in place in the countertop. Seal the edge of the countertop
beneath both trim flanges. Using a soft bedding compound that will prevent damage if later
removal for service is necessary. We recommend a nonadhesive type of sealant, such as
plumber’s putty, maximum compressed thickness of 1/16”.
WARNING:
Allow a 2 inch (2”) minimum clearance between the bottom of the grill and combustible
surface located below, ie: the upper edge of a drawer installed below the grill (Fig. 3, page
12). Failure to provide proper clearances and ventilation may result in a fire hazard.
10
Countertop and control cutout dimensions for each model are shown below:
5.13in
130mm
CONTROL MOUNTING PANEL
3.96in
100mm
5.08in
129mm
DRAIN FITTING
FRONTIER GRILL- REAR VIEW
SCALE 1:6
18in
457mm
CONNECTOR
PORT
12in
305mm
CORNER RADIUS
4 PLACES
.25in
[6mm]
3.63in
92mm
CONTROL
4.10in
104mm
4.13in
105mm
DIM A
4.75in
121mm
17.00in
432mm
11.50in
292mm
POWER CORD
6.16in
156mm
FRONTIER REMOTE
CONTROL GRILL
3.23in
82mm
7.39in
188mm
CONNECTOR CABLE
COUNTER
FEMALE CONNECTOR
TO PORTABLE GRILL
CONNECTOR
COVER
POWER CORD CHART
PLUG TYPE
MODEL NUMBER
65in
[1828mm]
DIMENSION A
B70300
120V 3-PRONG GFCI CORD
86in [2184mm]
B70311
240V 3-WIRE CORD, NO PLUG
67in [1702mm]
PORTABLE GRILL
ENCLOSURE
7.72in
196mm
3.50in
89mm
CONTROL MOUNTING PANEL
PORTABLE GRILL
REAR VIEW
SCALE 1:5
CONNECTOR PORT
W/CAP
3.20in
81mm
CONTROL
70in
[1778mm]
7.00in
178mm
CONTROL TO GRILL
CABLE ASSEMBLY
4.06in
103mm
PORTABLE GRILL
18.81in
[478mm]
DIM A
12.80in
[325mm]
6.74in
171mm
8.00in
203mm
POWER CORD
POWER CORD CHART
PLUG TYPE
DIMENSION A
B70310
120V 3-PRONG US CORD
63in [1600mm]
B70311
240V 3-WIRE CORD, NO PLUG
67in [1702mm]
MODEL NUMBER
4.66in
118mm
CONNECTOR PORT W/ CAP
5.00in
127mm
CONTROL MOUNTING PANEL
18.00in
457mm
3.23in
82mm
3.96in
100mm
5.08in
129mm
DRAIN FITTING
CONNECTOR
PORT
CONTROL
3.63in
92mm
LO-LID REMOTE
CONTROL GRILL
12in
305mm
LO-LID GRILL - REAR VIEW
SCALE 1:4
11.50in
292mm
4.13in
105mm
17.00in
432mm
4.10in
104mm
DIM A
COUNTER
POWER CORD
6.16in
156mm
4.75in
121mm
CONNECTOR CABLE
65in
[1828mm]
FEMALE CONNECTOR
TO NO-LID GRILL
CONNECTOR COVER
11
MODEL NUMBER
POWER CORD CHART
PLUG TYPE
DIMENSION A
B70360
120V 3-PRONG GFCI CORD
86in [2184mm]
B70361
240V 3-WIRE CORD, NO PLUG
67in [1702mm]
B70362
120V 3-PRONG US CORD
63 in [1702mm]
Please read this section prior to making cutout for the grill and remote control.
It is important to plan ahead for installation of the grill, keeping the
following dimensions in mind (please refer to Fig. 2 below).
A - 13 inches maximum depth of overhead cabinets
B -36 inches is minimum height of counter top
above floor
C -The minimum flat countertop surface that
the grill will
WALL MOUNTED CONTROL
rest upon must be equal to or greater than
the overall grill dimensions (refer to the
COUNTER MOUNTED GRILL
A
page 8 for overall grill dimensions).
D
GRILL CUTOUT
D -30 inches minimum clearance between the
top of the grill and the bottom of an
F
unprotected wood or metal cabinet or 24
inch minimum clearance when the bottom of
C
E
B
wood or metal cabinet is protected by not
less than 1/4 inch thick flame retardant mill
board covered with not less than No.
28 MSG sheet steel, 0.015 inch thick
Fig. 2
OPTIONAL CONTROL
stainless steel, 0.024 inch thick aluminum or
MOUNTING LOCATION
0.020 inch thick copper.
E - 4 inches minimum from backsplash of countertop to edge of grill (refer to the page 8 for overall
grill dimensions). 1-1/2 inches minimum from front of counter to grill.
F - Placement of the remote control - Layout design considerations for installation:
• Within easy reach of the operator, and to avoid the operator reaching over hot
surfaces to activate the control
• Mounted on a flat horizontal or vertical surface
• Out of direct sunlight and direct water spray as much as possible
•Clearance of structural members, internal cabinet or wall framework, depth of control distance
behind the control mounting panel, and power cord and connector cable routing access.
•Clearance of plumbing or other fixtures or installations.
•Within range of the connector cable attachment to grill
•Within range of power supply cord connection
•For portable grills, range of locations of grill placement and connector cable routing by the
operator to avoid unsafe operation
FOR INSTALLATIONS IN CANADA: “Do Not Install Closer Than 1/2 Inch (12 mm) From
Any Adjacent Surface”, and NE PAS INSTALLER A’MDINS DE 12MM DETOUTE SURFACE
ADJACENTE.
12
Warning:
To eliminate the risk of burns from reaching over heated grill, cabinet storage space
located above the grill should be avoided. If cabinet storage is to be provided, the
risk can be reduced by installing a range hood that projects horizontally a minimum
of 5 inches beyond the bottom of the cabinets.
Before making the countertop cutout, check for clearance. Check to see that the grill will clear the
front and side walls of the base cabinet. Also check for proper clearance to the back splash so
that the lid can open fully.
Adequate ventilation of the space below the countertop must be provided to ensure proper
operation of the grill. Heat transferred from the grill bottom pan during operation will overheat an
improperly ventilated area.
2 INCH (51MM) MINIMUM
Fig. 3
When making countertop cutout, radius the corner to help prevent cracking of the countertop
material. A 1/4 inch radius is typical, but follow the countertop manufacturer’s instructions
regarding the minimum radius and any reinforcements required to prevent damage to the
countertop over time.
If your countertop is made of solid surface material you will need to check with the manufacturer
for specific recommendations for cooktop & grill installation instructions. Most solid surface
countertop manufacturers require additional corner supports to prevent damage to the countertop.
Use the included screws to secure the grill to the countertop. Be careful not to over-tighten the
screws. Use an acrylic caulk to seal the flange to the countertop.
If your countertop is made of stone you will need to use an acrylic latex to mount the grill in place.
Put a large bead of caulk around the cutout opening and put the grill in place. Wipe away any
excess caulk, use water to remove the excess caulk. Allow the caulk to dry for a minimum of 24
hours without any moisture being allowed to come in contact with the caulk. Do not use the screws
that came with your grill. The caulk will hold the grill securely. Do not use a caulk which contains
silicone as this will stain the stone.
13
Drain Connection
For your convenience, the grill is equipped with a 1/8” NPT brass pipe
fitting and 90º brass elbow which you can attach the 1/4” ID flexible
hose that came with your grill. The portable version of the grill comes
with a brass pipe plug. If you are using your grill as a portable unit, remove the hose and fitting, install the plug, and save the hose and 90º
brass fitting for possible installation in the future.
Drain fitting for 1/4” ID hose
Fig. 4
Outlet Location
Be sure the electrical outlet intended for the grill is in an easily
accessible location. This allows the user to easily plug and unplug
the grill. This is necessary to ensure safe cleaning and storage of
the grill.
Suggested
Outlet
Locations
Final Preparations Prior to Use
Remove the protective plastic film from the lid, trim flange and glass panel. Clean the grill before
you use it for the first time. A thorough cleaning with a stainless steel or glass cleaner will remove
any traces of plastic film adhesives and manufacturing oils.
Wash the nonstick coated grates in warm soapy water before using the grill.
14
OPERATION OF GRILL
DO NOT USE WATER ON GREASE FIRES
Smother fire or flame or use dry chemical or foam-type extinguisher.
USE ONLY DRY POT HOLDERS
Moist or damp pot holders on hot surfaces may result in burns from steam. Do not let pot holder touch
the grate or element of the grill. Do not use a towel or other bulky cloth in place of a pot holder.
DO NOT COOK ON BROKEN GRILL GRATE OR GRIDDLE
If the grate should break, grease and oils may come into direct contact with the electric element and
create a risk of electric shock or fire. Contact an authorized service center or KENYON Customer
Care immediately at (860) 664-4906.
CLEAN GRILL WITH CAUTION
If a wet sponge or cloth is used to wipe spills on a hot cooking surface, be careful to avoid steam
burns. Some cleaners produce noxious fumes if applied to a hot surface. Read the cleaner label for
details prior to using.
DO NOT TOUCH HEATING ELEMENT OR GRATE
The heating element and grate will be hot for some time after cooking. These components should be
allowed to cool and then be handled with care and caution while cleaning, as they may be hot enough
to cause severe burns.
CLEAN GRILL AFTER EACH USE
This appliance is equipped with a removable, disposable drip pan. This pan MUST be removed and
cleaned after each and EVERY use. Do not allow grease to accumulate between cooking. The grease
pan and baffle tray MUST be used when cooking on the grill. Excessive grease may spill over into the
interior of the grill, voiding your warranty and posing a fire hazard.
NEVER LEAVE GRILL UNATTENDED AT HIGH HEAT SETTINGS
High heat setting may cause heavy smoking and ignite grease.
DO NOT CLEAN UNIT WITH PRESSURIZED WATER
Never clean the grill with any form of pressurized water or other types of cleaners. Doing so will void
the warranty and may pose a serious risk of electric shock. Always clean the grill with a cloth and a
stainless steel or glass surface cleaner.
STORAGE
When used as a portable grill, store indoors when not in use. When used as a built-in grill, suitable
shelter must be provided to prevent direct exposure to rain. Covers available.
TO PREVENT SMOKE
To prevent the contents of the grease pan from smoking, place 1 cup of water (or enough to cover the
bottom of the pan) in the grease pan before cooking.
DO NOT USE POTS OR OTHER BAKEWARE ON THE GRILL keep these instructions with the GRILL for future reference
15
Touch Control
POWER ON INDICATOR
This display indicates whether the grill is ON
or OFF.
POWER LEVEL DISPLAY
POWER LEVEL
DISPLAY
(+) POWER
SENSOR
POWER ON
INDICATOR
Digital display indicates heat output of grill.
The indicator lamps follow the sweep of the
screened graphic. There are eight possible
heat levels.
(+) POWER SENSOR
Touching this sensor will increase the heat
output of the grill in increments of one.
(-) POWER SENSOR
Touching this sensor will decrease the heat
output of the grill in increments of one.
POWER LEVEL GRAPHIC
POWER LEVEL
GRAPHIC
ON/OFF
MASTER
POWER SENSOR
Depicts the level of heat output by the element. The line sweeps from thin to thick,
indicating low to high power.
(-) POWER
SENSOR
MASTER POWER SENSOR
This is the main power control for the grill.
Touching this with the grill OFF will activate the
controller and turn the grill ON. Touching this
sensor with the grill on will shut the grill OFF.
CONTROL GRAPHICS
CALIBRATION
Upon application of electrical power to the
grill, the controller will run a self-calibration
process. The controller will then sound an
audible confirmation tone and the display
will briefly illuminate. The grill is now ready
to be used.
16
POWER ON
INDICATOR
ENERGIZING THE GRILL
To turn the grill ON, touch and hold the Master
Power Sensor for two seconds. The controller
will then beep and the Power On Indicator
will illuminate.
MASTER
POWER SENSOR
POWER LEVEL
DISPLAY (HEAT
SETTING 8
SELECTED)
HEAT SETTINGS
Your KENYON grill has 8 different heat settings, from 1 through 8, selected using the (-)
and (+) sensors. The heat setting is displayed
as shown at the right. The heating element
cycles at different time intervals to vary the
heat level. As the setting is increased, the heating element will remain on for a longer period,
increasing the cooking temperature of the grill.
TURNING “OFF” THE GRILL
To turn off the grill, simply touch and hold the Master Power Sensor for two seconds.
The controller will de-energize and shut off the heating element.
IN AN EMERGENCY THE 120V GRILL CAN BE TURNED OFF BY PRESSING THE “TEST”
BUTTON ON THE GFCI. REFER TO FIG. 5.
AUTOMATIC SHUT-OFF
The electronic control of your KENYON grill has been programmed with safety in mind and features
an automatic shut-off. The grill is programmed to shut down after a predetermined time after being
energized (see table below). The control will also shut off if it reaches a preset temperature limit. If
this occurs, allow the grill to cool down for 20-30 minutes.
17
PREHEAT AND AUTO SHUT-OFF TIME
The grill control has a preheat function which applies full power for a set amount of time for each
power setting selected. This preheat function brings the grate/griddle to the desired grilling
temperature quicker thus allowing you to begin grilling quicker. The table below provides the
preheat time and auto shut-off time for each power setting.
SETTING
PREHEAT TIME (min)
AUTO SHUT-OFF (min)
1
2
3
4
5
6
7
8
1
3
5
5
7
7
7
8
90
90
90
60
60
60
60
60
TEMPERATURE GUIDE
The following is meant to be a guideline. Factors such as wind, and outside temperatures, food
temperature when placed on grill can affect cooking times. The grill is designed and engineered
for optimal cooking performance with the lid down or closed.
SETTING
1
2
3
4
5
6
7
8
FOOD TYPES
Fried eggs on griddle
Pancakes - French toast on griddle
Vegetables
Vegetables - Fish
Fish - Chicken
Chicken - Hamburgers
Hamburgers - Steaks
Steaks
18
Power Cord
THIS PERTAINS TO 120V
GFCI MODELS ONLY
GROUNDED 3-PRONG PLUG
GROUND FAULT CIRCUIT
INTERRUPTER (GFCI)
The GFCI is a safety device designed to
protect the user from any electrical shock
hazard.
INDICATOR LIGHT
The indicator light will stay illuminated when
electrical power is applied and indicates that
the GFCI is working properly.
TEST/EMERGENCY OFF BUTTON
Pressing this button will test the GFCI.
The indicator light will go out and electrical
power will not be supplied to the grill. The
GFCI should be tested monthly.
RESET BUTTON
Pressing this button will reset the GFCI to
its normal function. The indicator lamp will
illuminate and electrical power will be
supplied to the grill. If the indicator lamp
does not illuminate, the GFCI has detected
a malfunction. Unplug the GFCI from the
receptacle and do not use the grill.
INDICATOR
LIGHT
RESET
BUTTON
TEST
BUTTON
GROUNDED 3-PRONG PLUG
CAUTION - To ensure continued protection
against risk of electric shock, the GFCI must
be plugged into a properly grounded
receptacle.
DO NOT USE AN EXTENSION CORD
240V MODELS
GROUND FAULT CIRCUIT
The supply voltage circuit (240V) should
be equipped with a ground fault circuit
interrupter. Check local codes for
compliance.
GROUND FAULT
CIRCUIT INTERRUPTER
GFCI
Fig. 5
19
Grill Parts
HEATING ELEMENT
The heating element is designed to pivot as
shown to remove/replace the baffle tray and
drip tray. It will stay in the up position. To put
down apply slight downward pressure.
GRATE
BAFFLE TRAY
The baffle tray supports the drip tray,
heating element and grate and must always
be used when operating the grill.
DRIP TRAY
DRIP TRAY
The disposable drip tray collects all the fat
and juices created during the cooking
process. The drip tray must be emptied
after each use. When replacing the drip tray,
position the drip tray so that it is completely
contained inside the baffle tray and insuring
that the side or the rim of the drip tray does
not protrude outside of the baffle tray.
(see Fig. 6)
To prevent the contents of the drip tray
from smoking, place 1 cup of water (or
enough to cover the bottom of the pan)
in the drip tray before cooking. The
replacement for the disposable drip tray is
Kenyon part #B96001.
BAFFLE
TRAY
GRATE
The grate must be cleaned after every use.
The grate has a nonstick coating for ease of
cleaning. Wash the grate after each use in
warm soapy water.
HEATING
ELEMENT
Fig. 6
DRIP TRAY MUST BE CONTAINED
INSIDE OF BAFFLE TRAY AS SHOWN
20
Lid Removal
Fig. 7
LID REMOVAL
The grill lid is removable for cleaning. To
remove the lid, slide the quick release
pin out of the hinge.
(see Fig. 7)
QUICK RELEASE
PIN
With the quick release pin removed,
grasp the lid, lifting on the left side to
clear the hinge and slide it the left until
clear of the hinge pin on the right. (see
Fig. 8) Once the lid is removed, it can
be washed in warm, soapy water.
Fig. 8
21
Warranty
Kenyon International, Inc (the “Company”) warrants its products in normal usage to be free of defects in
materials and workmanship subject to the conditions and limitations below.
Any part, which proves to be defective in normal usage during the warranty period will be repaired or replaced
by the Company.
This warranty covers certain products built by the Company and is subject to the following conditions and
limitations:
1.
The Company’s liability shall be limited to repair or replacement (choice of remedy at Company’s
option) of electronic components and grill grate/griddle as may be defective in materials or
workmanship. This liability is limited to three years from the date of original installation or 42 months from invoice date, whichever comes first; this warranty covers parts and labor at approved Company rates, $75 per hour. Stainless steel is warranted with a lifetime guarantee to be rust free, though proper
maintenance of grill is expected. Please refer to the care instructions in owner’s manual. If corrosion begins, contact the Company with photo evidence of corrosion for replacement components.
2.
Determination of suitability of the product for use contemplated by the Buyer, is the sole responsibility
of the Buyer and the Company shall have no responsibility in connection with such suitability.
3.
The Company shall not be liable for any damage resulting from:
•
failures due to use of the product in applications for which they are not intended;
•
failures due to wear and tear, abuse, carelessness, improper installation or maintenance;
•
failures due to breakage of glass, accidental or not.
4.
The Company shall be responsible for ground shipping charges to the location of the appliance (home) within the continental United States and Canada. Any duties, express or special shipping charges are at the expense of the Buyer.
5.
All labor allowed by the Company under this warranty must be performed by an Authorized Kenyon International Service Center, unless otherwise specified in writing by the Company.
THERE ARE NO OTHER WARRANTIES OF MERCHANTABILITY, FITNESS FOR PURPOSE OR ANY OTHER KIND, EXPRESSED OR IMPLIED AND NONE SHALL BE IMPLIED BY LAW. The duration of any such
warranties that are nevertheless implied by law for the benefit of a consumer, shall be limited to a period of
three years from original purchase by the user. Some countries do not allow limitations on how long an implied
warranty lasts, so this limitation may not apply to you.
THE COMPANY SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING
FROM THE BREACH OF THIS WARRANTY, WHETHER EXPRESSD, IMPLIED OR STATUTORY. Some
countries or states do not allow exclusion or limitation of consequential or incidental damages so this limitation
or exclusion may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER LEGAL
RIGHTS THAT MAY VARY FROM COUNTRY TO COUNTRY AND STATE TO STATE.
Kenyon International, Inc.
P.O. Box 925 • 8 Heritage Park Road • Clinton, CT 06413 USA
Phone: (860) 664-4906 FAX: (860) 664-4907
22
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising