Honda Navigation system(s) Secret Menus
1 Introduction
To access the secret menu on the CRV just push MENU + ZOOM
To access the secret menu on the ACCORD just push MAP + MENU +
2 Startup
3 Initial tests
Once entered the secret menus, the system performs some test
3.1 System Links
CRV Navigator
3.2 Car Status
Accord navigator
3.3 Yaw Rate
4 Diagnosis Menu
This is the most important of the secret menus:
4.1 System Links
This tests probe the full functionalities of the various navigator devices:
• Navigator ECU, the control unit, a PC running an embedded real-time UNIX
• GPS, the global positioning system device
• ANT, the GPS antenna
• Disp, the LCD screen
• Audio, loudspeakers
• Aircon, the air conditioning subsystem (ACCORD only)
CRV Navigator:
ACCORD Navigator:
4.2 Tire-Calibrate
This screen allows the displacement of map indicators in the map (“Auto-Tuning” suggested)
4.3 Monitor Check
4.3.1 RGB Color
4.3.2 Test Pattern
4.3.3 White Raster
All white…
4.3.4 Black Raster
All black…
4.3.5 Gray Tones
4.3.6 Screen Adjustment
Allows for the displacement of the screen via the cursors.
4.3.7 Color Change
Allow for the color map changes.
4.4 Yaw Rate
This screen manipulates the Gyroscope system (very delicate):
• Offset, the “central” value means travelling straight down
• Sensor, actual value of the Gyroscope
• CCW Cal Factor, calibration factor in the counter-clockwise direction
• CW Cal Factor, calibration factor in the clockwise direction
4.4.1 Monitor
This screen shows the Gyroscope on the map.
4.4.2 Tuning
This screen allows for changes in the CCW and CW directions (DON’T TOUCH!!).
4.5 Unit Check
4.5.1 Disp
Tests the Display conctions.
4.5.2 System History
Tests the Display conctions
4.5.3 GPS
This screen shows the detected satellites, their position, elevation, date and time.
Pressing the MENU button for 1 second another screen will be accessed containing even more detailed information about satellites:
• TS, total number of satellites
• AS, antispoofing system activated with signal encription
• HDop, horizontal accuracy
• VDop, vertical accuracy
• Speed, vehicle speed
• Direction, vehicle direction
• PRN, satellite identificator
• ST, status: 00=not connected, 02=connected
• AZI, azimut: 0=north, 90=est, 180=sud, 270=ovest
• EL, elevation: 0=horizontal, 90=vertical
• C/N, signal to noise ratio
• ACC, accuracy or precision
4.5.4 Car Status
This window shows the status of some vehicle devices:
• VSP, set to ON when the vehicle is moving
• BACK, set to ON when a changing speed
• ILL, set to ON when vehicle lights are on
• CHG, set to ON when the vehicle engine is running
4.5.5 Navi ECU
This windows shows some info about the Control Unit:
• High Tmp / Low Tmp, maximum and minimum detected temperatures
• Flash IPL, flash program loader version number
• Flash Application, loaded program version
• RAM, VRAM Overlay and VRAM Base, memory status
• Model, navigator model identifier
4.5.6 Backup Clear
Reset to factory default. All personal preferences are lost.
4.5.7 Force Download
Forces the DVD reload. The following window shows up while loading…
4.6 Cyclic Diag
Cyclic navigation system tests:
• Navigator ECU
• RGB Color
• Test Pattern
4.7 Vehicle Position
This window allows for the vehicle positioning and angle on the map.
4.8 Start Demo Mode
The “demo” mode permits the simulation of the route calculated until the vehicle is moved:
� Select the “Start Demo Mode” function
� Exit the secret menus mode and activate the navigator
� Insert a destination
� The navigator will simulate the route trip to the destination, showing all detailed info
4.9 In-line Diag
Executes the same tests performed during the Secret Menu start-up phase.
4.10Test menu
This function is hidden in the Diagnosis Menu window. To be accessed you must press first press the button, then the ZOOM button TWICE.
CRV Navigator:
ACCORD Navigator:
4.10.1 Clock Adjustment
Executes the same tests performed during the Secret Menu start-up phase.
4.10.2 Version info
4.10.3 Touch Screen
This option only appears in the Accord navigator and allows for the touch-screen test..