ZyXEL NBG 419N wireless router User manual
Below you will find brief information for wireless router NBG 419N. This document will guide you through the process of setting up port forwarding on your ZyXEL NBG-419N router. You will learn how to access the router's web interface, navigate to the port forwarding settings, and configure the necessary parameters. This will allow you to open specific ports on your router, enabling external access to devices on your local network.
advertisement
▼
Scroll to page 2
of
5
NBG-419N Setup port-forwarding 1 Table of content Introduction ....................................................................................................................................................... 3 Equipment ..................................................................................................................................................... 3 Login .................................................................................................................................................................. 3 Setup Port-Forward ........................................................................................................................................... 4 2 Introduction This guide describes how to set up port-forwarding on the NBG-419N with firmware 1.00(BFQ.3)C0. Equipment NBG-419N 1 Network cable. (RJ-45) 1 PC or MAC Login A web-browser are needed for configuring the NBG-419N. Some of the web browsers that can be used are Chrome browser, Firefox, Internet Explorer, Opera, Safari and etc. To enter the NBG-419N’s web-interface, open the web browser and access http://192.168.1.1/ Enter the login password and click login. The standard password is “1234”. If this is the first time the router is being configured, the password should be changed. Enter a new password in both the fields, and click apply. 3 Setup Port-Forward Click on “Expert mode” in the top menu. On the new page, click on “Configuration” and “NAT” in the menu on the left side. 4 Now click on the “Application”-tab. Fill out the following fields: Check on the “Active” field Type or select the service name to forward In Port, type in the Virtual port to forward In Server IP Address type the IP of the PC/Server, which the traffic should be forwarded to. Click Apply. You have now setup a port-forward on the NBG-419N. 5
advertisement
Key Features
- Port forwarding setup
- Access router web interface
- Configure port forwarding settings
- Enable external access to devices on local network
Frequently Answers and Questions
How can I access the router's web interface?
Open a web browser and go to http://192.168.1.1/
What is the default login password for the router?
The standard password is “1234”. You should change this to a more secure password.
How do I change the router's password?
Enter a new password in both fields and click apply.
What is port forwarding and why do I need it?
Port forwarding allows you to open specific ports on your router, enabling external access to devices on your local network. This is necessary for services like remote access to your computer or a home server.
How do I setup port forwarding on my router?
Go to the router's web interface and click on “Expert mode”. Then go to “Configuration” and “NAT” in the menu on the left side. Click on the “Application” tab and fill out the required fields for the service you want to forward.
Related manuals
Download
PDF
advertisement