Jura J6 Instructions for use

Jura J6 Instructions for use
Add to My manuals

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

Manual
Jura J6 Instructions for use | Manualzz

J6/J600 Instructions for Use

Table of contents

Your J6/J600

Control elements 4

Important information 6

Proper use ......................................................................................................................................................6

For your safety ...............................................................................................................................................6

1 Preparing and using for the first time 10

JURA on the Internet ....................................................................................................................................10

Setting up the machine ..............................................................................................................................10

Filling the bean container ...........................................................................................................................10

Determining the water hardness ..............................................................................................................10

First-time use .................................................................................................................................................11

Connecting milk ...........................................................................................................................................14

Connect accessory (wireless connection) ................................................................................................14

2 Preparation 15

Ways of preparing a beverage ...................................................................................................................15

Ristretto, espresso and coffee ....................................................................................................................16

Two ristretti, two espressi and two coffees .............................................................................................16

Latte macchiato, cappuccino and other speciality coffees with milk .................................................17

Ground coffee ...............................................................................................................................................17

Permanently setting the amount of water for the cup size .................................................................18

Adjusting the grinder ..................................................................................................................................19

Hot water .......................................................................................................................................................19

20

Filling the water tank ..................................................................................................................................20

Switching on the machine .........................................................................................................................20

Daily maintenance .......................................................................................................................................21

Regular maintenance ..................................................................................................................................21

Switching off the machine ......................................................................................................................... 22

4 Permanent settings in programming mode 23

Adjusting the product settings .................................................................................................................24

Adding products to the start screen, duplicating and personalising ................................................25

Automatic switch-off ..................................................................................................................................26

Energy-saving mode .................................................................................................................................. 27

Setting the water hardness ....................................................................................................................... 27

Display settings ...........................................................................................................................................28

Unit for amount of water ...........................................................................................................................28

Restore factory settings .............................................................................................................................29

Language ......................................................................................................................................................29

Querying information ................................................................................................................................30

5 Maintenance 31

Rinsing the machine ....................................................................................................................................31

Automatic milk system rinsing ................................................................................................................. 32

Cleaning the milk system .......................................................................................................................... 32

2

Table of contents

Dismantling and rinsing the cappuccino frother .................................................................................. 33

Inserting the filter .......................................................................................................................................34

Changing the filter ......................................................................................................................................34

Cleaning the machine ................................................................................................................................35

Descaling the machine ...............................................................................................................................36

Cleaning the bean container .....................................................................................................................38

Descaling the water tank ...........................................................................................................................39

40

7 Troubleshooting 41

8 Transport and environmentally friendly disposal 43

Transport / Emptying the system .............................................................................................................43

Disposal .........................................................................................................................................................43

10 Index

11 JURA contact details / Legal information

44

45

48

Symbol description

Warnings

J WARNING

J CAUTION

CAUTION

Always take note of any information marked with the words CAUTION or

WARNING and a warning sign. The signal word WARNING draws your attention to potential serious injury, and the signal word CAUTION to potential minor injury.

CAUTION draws your attention to potential damage to the machine.

Symbols used

T

Prompt to take action. This symbol means that you are being prompted to perform some action.

E Information and tips to make it even easier to use your JURA.

‘Coffee’ Display

3

9

10

3

4

5

6

7

8

1

2

Control elements

Control elements

20

4

1 Filler funnel cover

2 Filler funnel for ground coffee

3 Bean container cover

4 Water tank cover

11 Storage compartment cover

12 Grinder adjustment switch

13 Interchangeable milk spout

14 Storage compartment insert

6 Bean container with aroma preservation cover

16 Measuring spoon for ground coffee

17 Mains cable (side of machine)

8 Height-adjustable cappuccino frother

9 Coffee grounds container

19 Height- and width-adjustable coffee spout

11

14

15

12

13

16

17

18

19

Control elements

1 2 3

Top of the machine

3 P button (programming)

Front

4 Display

5 Multi-function buttons (button function depends on what is shown in the display)

4

5

Container for milk system cleaning

6

5

6

Important information

Important information

Proper use The machine is designed and intended for private domestic use. It should only be used for coffee preparation and to heat milk and water. Use for any other purpose will be deemed improper. JURA

Elektroapparate AG cannot accept any responsibility for the consequences of improper use.

Before using the machine read these instructions for use thoroughly and completely and comply with the instructions they contain. A warranty service is not applicable for damage or defects caused by non-compliance with the instructions for use.

Keep these instructions for use close to the machine and pass them on to the next user.

For your safety

J

Please carefully read and observe the important safety information set out below.

To avoid danger of potentially fatal electric shock:

U Never use a machine which is damaged or has a defective mains cable.

U In the event of signs of damage, for example if there is a smell of burning, unplug the machine immediately from the mains supply and contact JURA service.

U If the mains cable of this machine is damaged, it must be repaired either directly by JURA or by an authorised JURA service centre.

U Make sure that the JURA and the mains cable are not located close to hot surfaces.

U Be careful to ensure that the mains cable is not trapped and does not rub against sharp edges.

Important information

U Never open and repair the machine yourself.

Do not modify the machine in any way that is not described in these instructions for use. The machine contains live parts. If opened, there is a danger of potentially fatal injury. Repairs may only be carried out by authorised JURA service centres, using original spare parts and accessories.

U To completely and safely disconnect the machine from the power supply, first switch off the JURA using the On/Off button. Only then should you remove the mains plug from the power socket.

There is a risk of scalds or burns on the spouts and the cappuccino frother.

U Place the machine out of the reach of children.

U Do not touch any hot parts. Use the handles provided.

U Ensure that the cappuccino frother is correctly fitted and clean. If incorrectly fitted or if they become blocked, the cappuccino frother or its parts might come off. There is a danger of parts being swallowed.

A defective machine is not safe and could cause injury or fire. To avoid damage and any associated risk of injury or fire:

U Never allow the mains cable to loosely hang down. The mains cable could pose a tripping hazard or become damaged.

U Protect the JURA from environmental influences such as rain, frost and direct sunlight.

U Do not immerse the JURA, mains cable or connections in water.

7

8

Important information

U Do not put the JURA or any individual parts in the dishwasher.

U Switch your JURA off at the power switch before any cleaning operation. Always wipe the JURA with a damp cloth rather than a wet one, and protect it from prolonged exposure to water splash.

U On models with glass cup grille: Do not subject the glass cup grille to shock or impact.

U Only connect the machine to the mains voltage in accordance with the information on the rating plate. The rating plate is located on the underside of your JURA. Further technical data is provided in these instructions for use (see

Chapter 9 ‘Technical data’).

U Connect the JURA directly to a domestic power socket. Using multi-socket adapters or extension cords may cause overheating.

U Please only use original JURA maintenance products. Use of products that are not explicitly recommended by JURA could damage the machine.

U Do not use alkaline cleaning agents; only use a soft cloth and mild cleaning agents.

U Do not use any coffee beans treated with additives or caramelised coffee beans.

U Only fill the water tank with fresh, cold water.

U Switch the machine off at the power switch if you are going to be absent for a longer period of time.

U Children may not clean or service the machine unless supervised by a responsible person.

U Do not allow children to play with the machine.

U Keep children under the age of 8 away from the machine, or supervise them constantly.

Important information

U Children aged 8 and over may only operate the machine without supervision if they have been instructed in how to use it safely. Children must be able to recognise and understand the potential dangers arising from incorrect use.

People, including children, who

U do not have the physical, sensory or mental capabilities to use the machine safely or

U are inexperienced or lack knowledge in how to use the machine safely must be supervised by a responsible person when using it, or must be instructed in how to use it correctly.

Safety when handling the CLARIS Smart filter cartridge:

U Filter cartridges should be kept out of the reach of children.

U Store filter cartridges in a dry place in the sealed packaging.

U Protect cartridges from heat and direct sunlight.

U Do not use damaged filter cartridges.

U Do not open filter cartridges.

9

1 Preparing and using for the first time

1 Preparing and using for the first time

JURA on the Internet Visit us on the Internet. You can download short operating instructions for your machine from the JURA website (www.jura.com). You will also find interesting and up-to-date information on your JURA and on every aspect of coffee.

Setting up the machine When setting up your JURA, please note the following:

U

Place the JURA on a horizontal surface that is not sensitive to water.

U

Choose a spot for your JURA which protects the machine against overheating. Ensure that the ventilation slots are not covered.

Filling the bean container The bean container has an aroma preservation cover. This will ensure that your coffee beans retain their aroma for longer.

CAUTION Coffee beans which have been treated with additives (e.g. sugar), ground coffee or freeze-dried coffee will damage the grinder.

T  Only use roasted, untreated coffee beans to fill the bean container.

T  Open the bean container cover and remove the aroma preservation cover.

T  Remove any dirt or foreign objects from inside the bean container.

T  Fill the bean container with coffee beans, then close the aroma preservation cover and the bean container cover.

Determining the water hardness

When you use the machine for the first time, you must set the water hardness. If you do not know the hardness of your water, you can find this out first. Use the Aquadur® test strips supplied with the machine.

T  Hold the test strip briefly (for 1 second) under flowing water.

Shake off the water.

10

1 Preparing and using for the first time

T  Wait for about 1 minute.

T  You will then be able to read the degree of water hardness from the discolouration of the Aquadur® test strip and the description on the packaging.

First-time use When using the machine for the first time, you can choose whether you want to operate JURA with or without the CLARIS Smart filter cartridge. As well as limescale, the filter cartridge filters many other substances that impair aroma and flavour out of the water. These substances may negatively affect the coffee. To enjoy the best quality coffee at all times, we recommend that you use CLARIS Smart.

J WARNING If the machine is operated with a defective mains cable, there is a danger of potentially fatal electric shock.

T  Never use a machine which is damaged or has a defective mains cable.

Precondition: The bean container has been filled.

T  Insert the mains plug into a power socket.

T  Press the On/Off button Q to switch the JURA on.

‘Sprachauswahl’ / ‘Deutsch’

E To view more languages, turn the Rotary Switch.

T  Turn the Rotary Switch until the required language is displayed, e.g. ‘English’ .

T  Press the ‘Save’ button.

‘Saved’ appears briefly on the display to confirm the setting.

‘Water hardness’

E If you do not know the hardness of your water, you must find this out first (see Chapter 1 ‘Preparing and using for the first time – Determining the water hardness’).

T  Turn the Rotary Switch to change the water hardness setting, e.g. to ‘25 °dH’ .

11

1 Preparing and using for the first time

T  Press the ‘Save’ button.

‘Saved’ appears briefly on the display.

‘Insert filter’

E Now decide whether you want to operate your JURA with or without a CLARIS Smart filter cartridge.

Operation with filter cartridge: go straight to the next section.

Operation without filter cartridge: see Chapter 1 ‘Preparing and using for the first time – First-time use without filter cartridge activation’.

First-time use with filter cartridge activation

CAUTION Milk, sparkling mineral water or other liquids can damage the water tank or the machine.

T  Only fill the water tank with fresh, cold water.

T  Place one receptacle under the hot-water spout and another under the cappuccino frother.

T  Remove the water tank and rinse it with cold water.

T  Open the filter holder.

T  Fit the filter cartridge extension supplied on top of a CLARIS

Smart filter cartridge .

T  Insert the filter cartridge with its extension into the water tank.

T  Close the filter holder. It will click into place audibly.

T  Fill the water tank with fresh, cold water and reinsert the tank.

E The machine automatically detects that you have just inserted the filter cartridge.

‘Filter operation’ / ‘Saved’

‘Filter is being rinsed’ , water flows out of the hot-water spout.

Rinsing of the filter stops automatically after approximately

300 ml.

12

1 Preparing and using for the first time

‘System is filling’ , water flows out of the cappuccino frother.

‘Empty drip tray’

T  Empty the drip tray and put it back into the machine.

T  Place a receptacle under the coffee spout.

‘Machine is heating’

‘Machine is rinsing’ , the system is rinsed. The rinse stops automatically. ‘Please select product’ appears on the display.

Your JURA is ready for use.

E The display shows the products you can prepare.

E If the filter is active, this is indicated by a blue filter symbol in the top right of the display.

First-time use without filter cartridge activation

CAUTION Milk, sparkling mineral water or other liquids can damage the water tank or the machine.

T  Only fill the water tank with fresh, cold water.

T  Press the ‘No filter’ button.

‘Descaling mode’ / ‘Saved’

‘Fill water tank’

T  Place a receptacle under the cappuccino frother, the coffee spout and the hot-water spout.

T  Remove the water tank and rinse it with cold water.

T  Fill the water tank with fresh, cold water and reinsert the tank.

‘System is filling’ , the system fills up with water.

‘Machine is heating’

‘Machine is rinsing’ , water flows out of the coffee spout. The rinse stops automatically. Your JURA is ready for use.

E The display shows the products you can prepare.

13

1 Preparing and using for the first time

Connecting milk Your JURA creates fine, creamy, feather-light milk foam with a perfect consistency. The most important requirement for frothing milk is a milk temperature of 4–8 °C. We would therefore recommend using a milk cooler or a milk container.

E Suitable milk containers from JURA are available from specialised dealers.

T  Remove the protective cover from the cappuccino frother.

T  Attach the milk pipe to the cappuccino frother.

T  Connect the other end of the milk pipe to a milk container or a milk cooler.

Connect accessory

(wireless connection)

You have the option of connecting your JURA wirelessly to a compatible accessory (e.g. the Cool Control Wireless milk cooler). To do this, the receiver of the Cool Control or the JURA Smart Connect must be plugged into the service socket.

T  Press the P button.

‘Maintenance status’

T  Turn the Rotary Switch until ‘Machine settings’ is displayed.

T  Press the Rotary Switch.

‘Choose language’

T  Turn the Rotary Switch until ‘Connect accessory’ is displayed.

T  Press the Rotary Switch to enter the programme item.

‘Connect accessory’

T  Press the ‘Next’ button.

T  Now follow the instructions on the display to connect the accessory to the JURA.

14

2 Preparation

2 Preparation

Ways of preparing a beverage

Basic information about preparing drinks:

U

During the grinding operation you can select the coffee strength of single products by turning the Rotary Switch.

U

During preparation, you can change the preset amounts (e.g. amount of water or milk) by turning the Rotary Switch.

U

You can stop the machine at any time while a speciality coffee or hot water is being prepared. To do this, press the

‘  ’ button or the Rotary Switch.

Coffee tastes best served hot. A cold porcelain cup cools the beverage – and impairs the taste. We therefore recommend prewarming the cups. The full coffee aroma can develop only in prewarmed cups.

You can purchase a JURA cup warmer from your specialised dealer.

You can make permanent settings for all products in programming mode (see Chapter 4 ‘Permanent settings in programming mode –

Adjusting the product settings’).

The JURA offers various ways of preparing a speciality coffee, milk or hot water:

U

Preparation using the start screen: Simply press the corresponding preparation button for the product shown on the display (start screen) that you want.

The following products are displayed as standard:

U ‘Cappuccino’

U ‘Latte macchiato’

U ‘1 portion milk’

U ‘Espresso’

U ‘Coffee’

U ‘Hot water’

U

Using the product selector view (Rotary Selection): Only some of the products you can prepare are shown on the start screen. As soon as you turn the Rotary Switch, more products are displayed in a product selector view.

Turn the Rotary Switch to bring the product you want into focus. Start preparation by pressing the Rotary Switch.

15

2 Preparation

The following additional products are shown in the product selector view:

U ‘Ristretto’

U ‘Flat White’

U ‘Macchiato’

E The product selector view disappears automatically after

10 seconds if no preparation is started.

E You can move any of the standard products programmed in your JURA to your preferred position on the start screen or in the product selector and make it one of your favourites. You can duplicate and personalise your favourite speciality coffees by giving them a new product name and individual settings

(e.g. amount and coffee strength) (see Chapter 4 ‘Permanent settings in programming mode – Adding products to the start screen, duplicating and personalising’). Please note that the descriptions provided in the following sections always refer to the default settings.

Ristretto, espresso and coffee

Example: Proceed as follows to prepare one coffee.

T  Place a cup under the coffee spout.

T  Press the ‘Coffee’ button.

Preparation starts. ‘Coffee’ and the coffee strength are displayed. The preset amount of water for coffee flows into the cup.

Preparation stops automatically. Your JURA is once more ready for use.

Two ristretti, two espressi and two coffees

To prepare two speciality coffees, press the appropriate preparation button twice (within approximately 2 seconds).

Example: Proceed as follows to prepare two espressi.

T  Place two cups under the coffee spout.

T  Press the ‘Espresso’ button twice (within 2 seconds) to start preparation.

‘2 x Espresso’ appears and the preset amount of water flows into the cups.

Preparation stops automatically. Your JURA is once more ready for use.

16

Latte macchiato, cappuccino and other speciality coffees with milk

Ground coffee

2 Preparation

Your JURA prepares latte macchiato, cappuccino, flat white and espresso macchiato at the touch of a button. There is no need to move the glass or cup.

Example: Proceed as follows to prepare one latte macchiato.

T  Place a glass under the cappuccino frother.

T  Turn the setting wheel of the cappuccino frother to the Milk

Foam area 5.

T  Press the ‘Latte macchiato’ button.

‘Latte macchiato’ appears and the preset amount of milk flows into the glass.

E There is a short interval while the hot milk separates from the milk foam. This allows the typical layers of a latte macchiato to form.

Coffee preparation starts. The preset amount of water for espresso flows into the glass. Preparation stops automatically. appears on the display. ‘Rinse the milk system’

E 15 minutes after preparation, the milk system is automatically rinsed (see Chapter 5 ‘Maintenance – Automatic milk system rinsing’). Therefore always place a receptacle under the cappuccino frother after preparing milk.

To ensure that the cappuccino frother always works properly, you must clean it daily when you have been preparing milk (see

Chapter 5 ‘Maintenance – Cleaning the milk system’).

You can choose to use a second coffee variety, for example decaffeinated coffee, with the filter funnel for ground coffee.

E Never add more than two level measuring spoons of ground coffee.

E Use ground coffee which is not ground too finely. Very fine coffee can block up the system so that the coffee only comes out in drips.

E If you did not fill the machine with a sufficient amount of ground coffee, ‘Not enough ground coffee’ is displayed and the JURA stops the operation.

17

2 Preparation

E The desired speciality coffee must be prepared within approximately one minute after filling with the ground coffee. Otherwise the JURA stops the operation and is once more ready for use.

All speciality coffees with ground coffee are always prepared following the same model.

Example: Proceed as follows to prepare one espresso using ground coffee.

T  Place an espresso cup under the coffee spout.

T  Open the powder chute cover.

‘Please add ground coffee’

T  Place one level measuring spoon of ground coffee into the filler funnel.

T  Close the cover of the filler funnel.

‘Please select product’

T  Press the ‘Espresso’ button.

Preparation starts. ‘Espresso’ appears and the preset amount of water for espresso flows into the cup.

Preparation stops automatically. Your JURA is once more ready for use.

Permanently setting the amount of water for the cup size

It is easy to permanently adjust the amount of water for all single products to the cup size. Adjust the amount once as shown in the following example. Every time you prepare a drink in the future, this amount will be dispensed.

Example:  Proceed as follows to permanently set the amount of water for one coffee.

T  Place a cup under the coffee spout.

T  Press and hold the ‘Coffee’ button until ‘Enough coffee?

Press button’ appears.

T  Release the ‘Coffee’ button.

Preparation starts and the coffee flows into the cup.

T  Press any button as soon as there is sufficient coffee in the cup.

Preparation stops. ‘Saved’ appears briefly on the display. The set amount of water for one coffee is permanently stored.

Your JURA is once more ready for use.

18

2 Preparation

E You can alter this setting at any time by repeating the above procedure.

E You can also permanently set the amounts for all single products in programming mode (see Chapter 4 ‘Permanent settings in programming mode – Adjusting the product settings’).

Adjusting the grinder

CAUTION

You can adjust the grinder to suit the degree of roast of your coffee.

If you adjust the consistency of grind when the grinder is not operating, the grinder adjustment switch could be damaged.

T  Only adjust the consistency of grind when the grinder is running.

The consistency of grind is correct if the coffee flows regularly from the coffee spout. In addition a fine, thick crema forms.

Example:  Proceed as follows to change the consistency of grind during the preparation of an espresso.

T  Place a cup under the coffee spout.

T  Open the storage compartment cover.

T  Press the ‘Espresso’ button to start preparation.

T  Turn the grinder adjustment switch to the desired position while the grinder is running.

The preset amount of water flows into the cup. Preparation stops automatically.

T  Close the storage compartment cover.

Hot water

J CAUTION There is a danger of scalding from hot water splashes.

T  Avoid direct contact with the skin.

T  Place a cup under the hot-water spout.

T  Press the ‘Hot water’ button.

‘Hot water’ , the preset amount of water flows into the cup.

Preparation stops automatically. ‘Please select product’ appears on the display.

19

Filling the water tank Daily maintenance of the machine and hygiene when handling milk, coffee and water are key to a perfect coffee result in the cup every time. You should therefore change the water daily.

CAUTION Milk, sparkling mineral water or other liquids can damage the water tank or the machine.

T  Only fill the water tank with fresh, cold water.

T  Open the water tank cover.

T  Remove the water tank and rinse it with cold water.

T  Fill the water tank with fresh, cold water and reinsert the tank.

T  Close the water tank cover.

Switching on the machine

Daily maintenance of the machine and hygiene when handling milk, coffee and water are key to a perfect coffee result in the cup every time. You should therefore change the water daily.

T  Place a receptacle under the coffee spout.

T  Press the On/Off button Q to switch the JURA on.

‘Welcome to JURA’

‘Machine is heating’

‘Machine is rinsing’ , the system is rinsed.

The rinse stops automatically. ‘Please select product’ appears on the display. Your JURA is ready for use.

20

Daily maintenance

Regular maintenance

To ensure that you get many years of reliable service out of your

JURA and to guarantee the optimum coffee quality, the machine requires daily maintenance.

T  Pull out the drip tray.

T  Empty the coffee grounds container and the drip tray. Rinse them both with warm water.

E Always empty the coffee grounds container when the machine is switched on. This is the only way of resetting the coffee grounds counter.

T  Refit the coffee grounds container and the drip tray.

T  Rinse the water tank with clean water.

T  Clean the cappuccino frother (see Chapter 5

‘Maintenance – Cleaning the milk system’).

T  Remove the milk pipe and rinse it thoroughly under running water.

T  Dismantle and rinse the cappuccino frother (see Chapter 5

‘Maintenance – Dismantling and rinsing the cappuccino frother’).

T  Wipe the surface of the machine with a clean, soft, damp cloth (e.g. microfibre cloth).

Carry out the following maintenance actions regularly or as required:

U

In the interests of hygiene, we recommend changing the milk pipe and interchangeable milk spout on a regular basis

(approximately every 3 months). Replacements are available from specialised dealers.

U

Clean the inside of the water tank, e.g. with a brush. Further information about the water tank is provided in these instructions for use (see Chapter 5 ‘Maintenance – Descaling the water tank’).

U

Traces of milk and coffee may stick to the top and bottom of the cup grille. If this happens, clean the cup grille.

21

Switching off the machine

When the JURA is switched off, the system is automatically rinsed if a speciality coffee has been prepared. If milk has been prepared, you will also be prompted to clean the milk system.

T  Place one receptacle under the coffee spout and another under the cappuccino frother.

T  Press the On/Off button Q.

E If milk has been prepared, you will be prompted to clean the milk system ( ‘Clean the milk system’ ). After 10 seconds the switch-off process continues automatically.

If milk has been prepared but you have not started milk system cleaning, the milk system is rinsed first ( ‘Milk system is being rinsed’ ).

‘Machine is rinsing’ , the system rinses itself.The operation stops automatically.Your JURA is switched off.

22

4 Permanent settings in programming mode

4 Permanent settings in programming mode

Press the P button to enter programming mode. You can navigate through the programme items and permanently save the required settings simply by turning the Rotary Switch and using the multifunction buttons. The following settings can be made:

Programme item Sub-item

‘Maintenance status’

‘Clean’ ,

‘Change the filter’ (only if filter is fitted),

‘Descale’ ,

‘Clean the milk system’ ,

‘Rinse’ ,

‘Maintenance information’

‘Product settings’ ‘Expert mode’

Explanation

T Here you can start the required maintenance programme or find out what maintenance actions are required.

‘Classics’

‘Machine settings’ ‘Choose language’

‘Switch off after’

‘Save energy’

‘Factory setting’

‘Units’

‘Display’

‘Water hardness’

‘Product counter’ ,

‘Maintenance counter’

‘Version’

‘Connect accessory’ ,

‘Disconnect accessories’

T Select your settings for speciality coffees and hot water.

T Replace the products on the start screen and in the product selector with your favourites.

Duplicate and personalise your favourite speciality coffees by giving them a new product name and individual settings.

T Select your language.

T Set the time after which the JURA should switch off automatically.

T Select an energy-saving mode.

T Reset the machine to its factory setting.

T Select the unit for the amount of water.

T Change the display settings.

T Adjust the water hardness.

T Keep track of all products prepared and view the number of maintenance programmes performed.

Software version

T Connect the machine wirelessly to a JURA accessory or disconnect the connection again.

(Only displayed if the JURA Smart Connect is being used.)

23

4 Permanent settings in programming mode

Adjusting the product settings

In the programme item ‘Product settings’  / ‘Expert mode’ you can make individual settings for all speciality coffees and hot water. The following permanent settings can be made:

More settings Product Coffee Amount strength

10 levels Coffee: 15 ml – 80 ml Ristretto, espresso

Coffee

Two ristretti, two espressi, two coffees

10 levels

Coffee: 25 ml – 240 ml

Coffee: the amount set for the single product is doubled.

Latte macchiato 10 levels Coffee: 25 ml – 240 ml

Milk: 0 sec. – 120 sec.

Interval: 0 sec. – 60 sec.

Cappuccino, flat white

Espresso macchiato

Portion of milk

Hot water

10 levels

10 levels

Coffee: 25 ml – 240 ml

Milk: 0 sec. – 120 sec.

Coffee: 15 ml – 80 ml

Milk: 0 sec. – 120 sec.

Interval: 0 sec. – 60 sec.

Milk: 0 sec. – 120 sec.

Water: 25 ml – 450 ml

Temperature (low, normal, high),

Product name

Temperature (low, normal, high)

Temperature (as for single product),

Product name

Temperature (low, normal, high),

Product name

Temperature (low, normal, high),

Product name

Temperature (low, normal, high),

Product name

Product name

Temperature (low, normal, high),

Product name

Permanent settings in programming mode always follow the same model.

Example: Proceed as follows to change the amount of water and coffee strength for one espresso.

T  Press the P button.

‘Maintenance status’

T  Turn the Rotary Switch until ‘Product settings’ is displayed.

T  Press the Rotary Switch.

‘Expert mode’

T  Press the Rotary Switch to enter the programme item.

‘Expert mode’

T  Press the ‘Espresso’ button.

‘Expert mode’ / ‘Espresso’

T  Press the Rotary Switch.

‘Espresso’

T  Press the Rotary Switch.

24

4 Permanent settings in programming mode

T  Turn the Rotary Switch to change the coffee strength setting.

T  Press the Rotary Switch to confirm the setting.

T  Turn the Rotary Switch until the fill volume is in focus.

T  Press the Rotary Switch.

T  Turn the Rotary Switch to change the fill volume setting.

T  Press the Rotary Switch to confirm the setting.

T  Press the ‘Save’ button.

‘Saved’ appears briefly on the display.

‘Expert mode’ / ‘Espresso’

T  Press the P button to exit programming mode.

Adding products to the start screen, duplicating and personalising

In the programme item ‘Product settings’  / ‘Classics’ you will find all the products stored as standard in your JURA. You can move any of these products to your preferred position on the start screen or in the product selector and make it one of your favourites. You can duplicate and personalise your favourite speciality coffees by giving them a new product name and individual settings (e.g. amount and coffee strength).

Example:  Proceed as follows to replace ‘Latte macchiato’ on the start screen with ‘Macchiato’ .

T  Press the P button.

‘Maintenance status’

T  Turn the Rotary Switch until ‘Product settings’ is displayed.

T  Press the Rotary Switch.

‘Expert mode’

T  Turn the Rotary Switch until ‘Classics’ is displayed.

T  Press the Rotary Switch to enter the programme item.

‘Add to favourites’

T  Press the Rotary Switch again.

T  Turn the Rotary Switch until ‘Macchiato’ is in focus.

T  Press the Rotary Switch.

‘Select position’

T  Press the ‘Latte macchiato’ button.

‘Macchiato’ / ‘Do you want to replace the current product?’

T  Press the ‘Yes’ button.

‘Saved’ appears briefly on the display.

‘Product name’

25

4 Permanent settings in programming mode

E You can now give the product you just added a new name.

T  Press the ‘Save’ button.

‘Macchiato’

E You can now change various settings for the product. To do this, briefly press the Rotary Switch to access the various setting options. Confirm the settings by pressing the

‘Save’ button.

E If you do not want to change any more settings, just press the

‘  ’ button.

T  Press the P button to exit programming mode.

Automatic switch-off By instructing your JURA to automatically switch itself off, you can cut down your energy consumption. If this function is activated, your JURA switches off automatically after the preset time following the last action on the machine.

You can set the automatic switch-off to 15 minutes, 30 minutes or

1-9 hours.

T  Press the P button.

‘Maintenance status’

T  Turn the Rotary Switch until ‘Machine settings’ is displayed.

T  Press the Rotary Switch.

‘Choose language’

T  Turn the Rotary Switch until ‘Switch off after’ is displayed.

T  Press the Rotary Switch to enter the programme item.

‘Switch off after’

T  Turn the Rotary Switch to change the switch-off time.

T  Press the ‘Save’ button.

‘Saved’ appears briefly on the display.

‘Switch off after’

T  Press the P button to exit programming mode.

26

Energy-saving mode

Setting the water hardness

4 Permanent settings in programming mode

In the programme item ‘Machine settings’ / ‘Save energy’ you can permanently set an energy-saving mode (Energy Save Mode,

E.S.M.

© ):

U

‘Active’

U Soon after the last preparation, the JURA stops heating up.

After about 5 minutes the message ‘Energy Save’ is displayed.

U Before you can prepare a speciality coffee, speciality coffee with milk, or hot water, the machine must heat up.

U

‘Inactive’

U All speciality coffees, speciality coffees with milk and hot water can be prepared without having to wait.

Example:  Proceed as follows to change the energy-saving mode from ‘Active’ to ‘Inactive’ .

T  Press the P button.

‘Maintenance status’

T  Turn the Rotary Switch until ‘Machine settings’ is displayed.

T  Press the Rotary Switch.

‘Choose language’

T  Turn the Rotary Switch until ‘Save energy’ is displayed.

T  Press the Rotary Switch to enter the programme item.

‘Save energy’

T  Turn the Rotary Switch until ‘Inactive’ is displayed.

T  Press the ‘Save’ button.

‘Saved’ appears briefly on the display.

‘Save energy’

T  Press the P button to exit programming mode.

The harder the water is, the more frequently the JURA needs to be descaled. It is therefore important to set the water hardness accurately.

The water hardness was set when the machine was first used. You can change this setting at any time.

The water hardness can be adjusted on a continuous scale between

1 °dH and 30 °dH.

T  Press the P button.

‘Maintenance status’

27

4 Permanent settings in programming mode

T  Turn the Rotary Switch until ‘Machine settings’ is displayed.

T  Press the Rotary Switch.

‘Choose language’

T  Turn the Rotary Switch until ‘Water hardness’ is displayed.

T  Press the Rotary Switch to enter the programme item.

‘Water hardness’

T  Turn the Rotary Switch to change the setting.

T  Press the ‘Save’ button.

‘Saved’ appears briefly on the display.

‘Water hardness’

T  Press the P button to exit programming mode.

Display settings In the programme item ‘Machine settings’  / ‘Display’ you can set the display brightness (as a percentage).

T  Press the P button.

‘Maintenance status’

T  Turn the Rotary Switch until ‘Machine settings’ is displayed.

T  Press the Rotary Switch.

‘Choose language’

T  Turn the Rotary Switch until ‘Display’ is displayed.

T  Press the Rotary Switch to enter the programme item.

‘Display’

T  Turn the Rotary Switch to change the setting.

T  Press the ‘Save’ button.

‘Saved’ appears briefly on the display.

‘Display’

T  Press the P button to exit programming mode.

Unit for amount of water In the programme item ‘Machine settings’  / ‘Units’ you can select the unit used for the amount of water.

Example: Proceed as follows to change the unit for the amount of water from ‘ml’ to ‘oz’ .

T  Press the P button.

‘Maintenance status’

T  Turn the Rotary Switch until ‘Machine settings’ is displayed.

T  Press the Rotary Switch.

‘Choose language’

T  Turn the Rotary Switch until ‘Units’ is displayed.

28

4 Permanent settings in programming mode

T  Press the Rotary Switch to enter the programme item.

‘Units’

T  Turn the Rotary Switch until ‘oz’ is displayed.

T  Press the ‘Save’ button.

‘Saved’ appears briefly on the display.

‘Units’

T  Press the P button to exit programming mode.

Restore factory settings In the programme item ‘Machine settings’ / ‘Factory setting’ the machine can be reset to its factory setting: All user settings (apart from the ‘filter’ and ‘water hardness’) are reset to factory settings.

Your JURA then switches off.

T  Press the P button.

‘Maintenance status’

T  Turn the Rotary Switch until ‘Machine settings’ is displayed.

T  Press the Rotary Switch.

‘Choose language’

T  Turn the Rotary Switch until ‘Factory setting’ is displayed.

T  Press the Rotary Switch to enter the programme item.

‘Factory setting’ / ‘Reset the machine to the factory settings?’

T  Press the ‘Yes’ button.

‘Saved’ appears briefly on the display.

Your JURA is switched off.

Language In this programme item you can set the language used by your

JURA.

Example: Proceed as follows to change the language from ‘English’ to ‘Deutsch’ .

T  Press the P button.

‘Maintenance status’

T  Turn the Rotary Switch until ‘Machine settings’ is displayed.

T  Press the Rotary Switch.

‘Choose language’

T  Press the Rotary Switch to enter the programme item.

‘Choose language’

T  Turn the Rotary Switch until ‘Deutsch’ is displayed

29

4 Permanent settings in programming mode

T  Press the ‘Save’ button.

‘Gespeichert’ appears briefly on the display.

‘Sprachauswahl’

T  Press the P button to exit programming mode.

‘Bitte wählen’

Querying information In the programme item ‘Machine settings’ you can view the following information:

U

‘Product counter’ : Number of prepared speciality coffees, milk and hot water

U

‘Maintenance counter’ : Number of maintenance programmes performed (cleaning, descaling etc.)

U

‘Version’ : Software version

Example: Proceed as follows to view the number of speciality coffees prepared.

T  Press the P button.

‘Maintenance status’

T  Turn the Rotary Switch until ‘Machine settings’ is displayed.

T  Press the Rotary Switch.

‘Choose language’

T  Turn the Rotary Switch until ‘Product counter’ is displayed.

T  Press the Rotary Switch to enter the programme item.

‘Product counter’

E Turn the Rotary Switch to view the number of other speciality coffees.

T  Press the P button to exit programming mode.

30

5 Maintenance

5 Maintenance

Rinsing the machine

Your JURA has the following integrated maintenance programmes:

U

Rinsing the machine

U

Rinsing the milk system in the dual spout

U

Cleaning the milk system in the dual spout ( ‘Clean the milk system’ )

U

Changing the filter ( ‘Change the filter’ )

(only if filter is activated)

U

Cleaning the machine ( ‘Clean’ )

U

Descaling the machine ( ‘Descale’ )

(only if filter is not activated)

E Clean or descale the machine, rinse the milk system or change the filter when you are prompted to do so.

E Press the P button to view a list of the maintenance programmes ( ‘Maintenance status’ ). When the bar is completely filled with red, your JURA will prompt you to perform the appropriate maintenance programme.

E In the interests of hygiene, you should clean the milk system daily when you have been preparing milk.

You can initiate the rinse operation manually at any time.

T  Place a receptacle under the coffee spout.

T  Press the P button.

‘Maintenance status’

T  Press the Rotary Switch.

‘Clean’

T  Turn the Rotary Switch until ‘Rinse’ is displayed.

T  Press the Rotary Switch to initiate the rinse operation.

‘Machine is rinsing’ , ‘Milk system is being rinsed’ , water flows out of the coffee spout.

The rinse stops automatically. ‘Please select product’ appears on the display.

31

5 Maintenance

Automatic milk system rinsing

15 minutes after milk preparation, the milk system is automatically rinsed. Therefore always place a receptacle under the cappuccino frother after preparing milk.

When ‘Rinse the milk system’ is displayed, you can start rinsing by pressing the Rotary Switch.

Cleaning the milk system To ensure that the cappuccino frother always works properly, you must clean it daily when you have been preparing milk

CAUTION If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water.

T  Use only original JURA maintenance products.

E JURA milk system cleaner is available from specialised dealers.

E To clean the milk system, use the container supplied.

T  Press the P button.

‘Maintenance status’

T  Press the Rotary Switch.

‘Clean’

T  Turn the Rotary Switch until ‘Clean the milk system’ is displayed.

T  Press the Rotary Switch.

‘Clean the milk system’

T  Press the Rotary Switch again.

T  Press the ‘Start’ button.

T  Remove the milk pipe from the milk container or carton.

T  Add milk system cleaner to the front part of the container up to the bottom mark (indicated by 6).

T  Then fill with water up to the upper mark.

T  Place the container under the cappuccino frother.

T  Turn the setting wheel of the cappuccino frother to the Milk position z.

6

32

6

5 Maintenance

T  Connect the milk pipe to the container.

E To connect the milk pipe to the container correctly, the pipe must be fitted with a connector.

T  Press the ‘Next’ button.

‘Milk system is being cleaned’ appears and the cappuccino frother and the milk pipe are cleaned.

T  During the first brief interruption, set the setting wheel of the cappuccino frother to the Milk Foam position 5.

‘Water for cleaning milk system’

T  Rinse the container thoroughly and fill the front part with fresh water up to the upper mark.

T  Place this under the cappuccino frother and reconnect the milk pipe to the container.

T  Press the ‘Next’ button.

‘Milk system is being cleaned’ appears and the cappuccino frother and the milk pipe are rinsed with fresh water.

The start screen is displayed.

Dismantling and rinsing the cappuccino frother

To make sure the cappuccino frother works properly, and in the interests of hygiene, it must be dismantled and rinsed daily if you have been preparing milk.

T  Remove the milk pipe and rinse it thoroughly under running water.

T  Carefully pull the cappuccino frother down and off.

T  Dismantle the cappuccino frother into its individual parts.

T  Rinse all the parts under running water. If there are severely dried-on milk residues, firstly immerse the individual parts in a solution of 250 ml cold water and 1 capful of JURA milk system cleaner. Then rinse the parts thoroughly.

T  Reassemble the cappuccino frother.

E Ensure that all individual parts are correctly and firmly connected to ensure correct operation of the cappuccino frother.

T  Firmly attach the frother to the connector.

33

5 Maintenance

Inserting the filter

Changing the filter

Your JURA no longer has to be descaled if you are using the CLARIS

Smart filter cartridge. If you did not insert the filter cartridge the first time you used the machine, you can do this now as follows.

T  Place a receptacle under the hot-water spout.

T  Remove and empty the water tank.

T  Open the filter holder.

T  Fit the filter cartridge extension supplied on top of a CLARIS

Smart filter cartridge .

T  Insert the filter cartridge with its extension into the water tank.

T  Close the filter holder. It will click into place audibly.

T  Fill the water tank with fresh, cold water and reinsert the tank.

E The machine automatically detects that you have just inserted the filter cartridge.

‘Filter operation’ / ‘Saved’

‘Filter is being rinsed’ , water flows out of the hot-water spout.

Rinsing of the filter stops automatically after approximately

300 ml.

‘Empty drip tray’

T  Empty the drip tray and put it back into the machine.

‘Filter operation’ , ‘Filter rinsing complete’

‘Please select product’ appears on the display. Your JURA is once more ready for use.

E Once the filter cartridge stops working (depending on the water hardness setting), the JURA will prompt you to change the filter.

E CLARIS Smart filter cartridges are available from specialised dealers.

Precondition:  ‘Change filter’ is displayed.

34

5 Maintenance

T  Place a receptacle under the hot-water spout.

T  Remove and empty the water tank.

T  Open the filter holder and remove the old CLARIS Smart filter cartridge and filter extension.

T  Fit the filter cartridge extension on top of a new CLARIS filter cartridge Smart.

T  Insert the filter cartridge with its extension into the water tank.

T  Close the filter holder. It will click into place audibly.

T  Fill the water tank with fresh, cold water and reinsert the tank.

E The machine automatically detects that you have just changed the filter cartridge.

‘Change the filter’ / ‘Saved’

‘Filter is being rinsed’ , water flows out of the hot-water spout.

‘Empty drip tray’

T  Empty the drip tray and put it back into the machine.

‘Change the filter’ , ‘Filter rinsing complete’

‘Please select product’ appears on the display. Your JURA is once more ready for use.

Cleaning the machine After 180 preparations or 80 switch-on rinses, the JURA will prompt you to clean it.

CAUTION If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water.

T  Use only original JURA maintenance products.

E The cleaning programme lasts approximately 20 minutes.

E Do not interrupt the cleaning programme. The quality of cleaning will be impaired if you do so.

E JURA cleaning tablets are available from specialised dealers.

Precondition:  ‘Clean machine’ is displayed.

T  Press the P button.

‘Clean’

35

5 Maintenance

T  Press the Rotary Switch.

T  Press the ‘Start’ button.

T  Press the ‘Start’ button again.

‘Empty coffee grounds container’

T  Empty the drip tray and coffee grounds container and put them back into the machine.

‘Press the Rotary Switch’

T  Place one receptacle under the coffee spout and another under the cappuccino frother.

T  Press the Rotary Switch.

‘Machine is being cleaned’ , water flows out of the coffee spout.

The operation is interrupted, ‘Add cleaning tablet’ .

T  Open the cover of the filler funnel for ground coffee.

T  Insert a JURA cleaning tablet into the filler funnel.

T  Close the cover of the filler funnel.

‘Press the Rotary Switch’

T  Press the Rotary Switch.

‘Machine is being cleaned’ , water flows repeatedly out of the coffee spout and the cappuccino frother.

The operation stops automatically.

‘Empty coffee grounds container’

T  Empty the drip tray and coffee grounds container and put them back into the machine.

Cleaning is now complete. The start screen is displayed.

Descaling the machine The JURA builds up deposits of limescale over time and automatically prompts you to descale it when necessary. The degree of calcification depends on the hardness of your water.

E If you are using a CLARIS Smart filter cartridge, you will not be prompted to descale.

J CAUTION If the descaling agent comes into contact with the skin or eyes, this can cause irritation.

T  Avoid contact with the skin or eyes.

T  Rinse off the descaling agent with clean water. Should you get any descaling agent in your eye, see a doctor.

36

5 Maintenance

CAUTION

CAUTION

If the wrong descaling agent is used, the machine could be damaged and/or traces could be left behind in the water.

T  Use only original JURA maintenance products.

If the descaling operation is interrupted, there may be damage to the machine.

T  Allow the descaling programme to run to the end.

CAUTION If the descaling agent comes into contact with sensitive surfaces

(e.g. marble), damage cannot be ruled out.

T  Clean up any splashes immediately.

E The descaling programme lasts approximately 45 minutes.

E JURA descaling tablets are available from specialised dealers.

Precondition:  ‘Decalcify machine’ is displayed.

T  Press the P button.

‘Descale’

T  Press the Rotary Switch.

T  Press the ‘Start’ button.

T  Press the ‘Start’ button again.

‘Empty drip tray’

T  Empty the drip tray and coffee grounds container and put them back into the machine.

‘Pour descaling agent into water tank’

T  Remove and empty the water tank.

T  Completely dissolve 3 JURA descaling tablets in a receptacle holding 500 ml of water. This may take several minutes.

T  Pour the solution into the empty water tank and insert it into the machine.

T  Place one receptacle under the hot-water spout and another under the cappuccino frother.

‘Press the Rotary Switch’

T  Press the Rotary Switch.

‘Machine is being descaled’ appears and water flows repeatedly out of the hot-water spout and the cappuccino frother.

The operation is interrupted, ‘Empty drip tray’ .

37

5 Maintenance

Cleaning the bean container

T  Empty the drip tray and coffee grounds container and put them back into the machine.

‘Fill water tank’

T  Remove the water tank and rinse it thoroughly.

T  Fill the water tank with fresh, cold water and reinsert the tank.

‘Press the Rotary Switch’

T  Place a receptacle under the cappuccino frother, the coffee spout and the hot-water spout.

T  Press the Rotary Switch.

‘Machine is being descaled’ , The descaling operation is continued.

The operation is interrupted, ‘Empty drip tray’ .

T  Empty the drip tray and coffee grounds container and put them back into the machine.

Descaling is now complete. The start screen is displayed.

E If the descaling operation stops unexpectedly, rinse the water tank thoroughly.

Coffee beans may be covered with a slight oil film which remains on the walls of the bean container. These traces may negatively affect the coffee result. For this reason clean the bean container from time to time.

Precondition:  ‘Fill bean container’ is displayed.

T  Switch the machine off with the On/Off button Q.

T  Open the bean container cover and remove the aroma preservation cover.

T  Clean the bean container with a soft, dry cloth.

T  Fill the bean container with coffee beans, then close the aroma preservation cover and the bean container cover.

38

5 Maintenance

Descaling the water tank Limescale deposits may form in the water tank. To ensure correct function of the machine, descale the water tank from time to time.

T  Remove the water tank.

T  If you use a CLARIS Smart filter cartridge, remove this.

T  Completely fill the water tank and dissolve 3 JURA descaling tablets in it.

T  Leave the water tank with the descaling solution for several hours (e.g. overnight).

T  Empty the water tank and rinse it thoroughly.

T  If you use a CLARIS Smart filter cartridge, insert this again.

T  Fill the water tank with fresh, cold water and reinsert the tank.

39

Message Cause/Result

‘Fill water tank’ The water tank is empty. You cannot prepare any products.

‘Empty coffee grounds container’

‘Drip tray not fitted’

The coffee grounds container is full. You cannot prepare any products.

‘Fill bean container’

‘Rinse the milk system’

The drip tray is not inserted correctly or is not inserted at all.

You cannot prepare any products.

The bean container is empty. You cannot prepare any speciality coffees, but you can prepare hot water and milk.

The JURA requests a milk system rinse.

Action

T Fill the water tank (see Chapter 3 ‘Daily operation – Filling the water tank’).

T Empty the coffee grounds container and the drip tray (see Chapter 3 ‘Daily operation – Daily maintenance’).

T Fit the drip tray.

T Fill the bean container (see Chapter 1

‘Preparing and using for the first time –

Filling the bean container’).

‘Change filter’

‘Clean machine’ The JURA is prompting you to clean it.

‘Decalcify machine’

The JURA is prompting you to descale it.

‘Not enough ground coffee’

‘Machine too hot for maintenance’

The filter cartridge no longer works. The JURA is prompting a filter change.

There is insufficient ground coffee in the machine; the JURA stops the operation.

The system is too hot to start a maintenance programme.

T Press the Rotary Switch to start rinsing or wait 15 minutes until rinsing starts automatically (see Chapter 5 ‘Maintenance – Automatic milk system rinsing’).

T Replace the CLARIS Smart filter cartridge (see Chapter 5 ‘Maintenance –

Changing the filter’).

T Perform cleaning (see Chapter 5

‘Maintenance – Cleaning the machine’).

T Perform descaling (see Chapter 5

‘Maintenance – Descaling the machine’).

T The next time you prepare a beverage, add more ground coffee (see Chapter 2

‘Preparation – Ground coffee’).

T Wait for several minutes until the system has cooled or prepare a speciality coffee or hot water.

40

7 Troubleshooting

7 Troubleshooting

Problem

Insufficient foam is produced when the milk is frothed or milk sprays from the cappuccino frother.

Coffee only comes out in drips when it is being prepared.

‘Fill water tank’ is displayed although the water tank is full.

Little or no water or steam comes out of the cappuccino frother. The pump is very quiet.

Grinder is making a very loud noise.

‘Error 2’ or displayed.

‘Error 5’ is

Cause/Result

The cappuccino frother is dirty.

The coffee is ground too finely and obstructs the system. The water hardness may not have been correctly set.

The water tank float is trapped.

The connector of the cappuccino frother may be blocked by milk residues or limescale fragments loosened during descaling.

There are foreign objects in the grinder.

If the machine has been exposed to the cold for a long period of time, heating may be disabled for safety reasons.

Action

T Clean the cappuccino frother (see

Chapter 5 ‘Maintenance – Cleaning the milk system’).

T Dismantle and rinse the cappuccino frother (see Chapter 5 ‘Maintenance –

Dismantling and rinsing the cappuccino frother’).

T Set the grinder to a coarser setting (see

Chapter 2 ‘Preparation – Adjusting the grinder’).

T Perform descaling (see Chapter 5

‘Maintenance – Descaling the machine ’).

T Descale the water tank (see Chapter 5

‘Maintenance – Descaling the water tank’).

T Remove the cappuccino frother.

T Unscrew the black connector with the aid of the hexagonal hole on the measuring spoon for ground coffee.

T Clean the connector thoroughly.

T Screw the connector back on by hand.

T Carefully tighten it using the hexagonal hole on the measuring spoon, turning by no more than a quarter of a rotation.

T Contact customer support in your country (see Chapter 11 ‘JURA contact details / Legal information’).

T Warm the machine at room temperature.

41

7 Troubleshooting

Problem

Other ‘Error’ messages are displayed.

Cause/Result

Action

T Switch the JURA off with the On/Off button Q. Contact customer support in your country (see Chapter 11 ‘JURA contact details / Legal information’).

E If you were unable to solve the problem, contact customer support in your country (see Chapter 11 ‘JURA contact details /

Legal information’).

42

8 Transport and environmentally friendly disposal

8 Transport and environmentally friendly disposal

Transport / Emptying the system

Keep the packaging for your JURA. It should be used to protect the machine during transport.

In order to protect the JURA from frost during transport, the system must be emptied.

T  Remove the milk pipe from the cappuccino frother.

T  Place a receptacle under the cappuccino frother.

T  Turn the Rotary Switch until ‘1 portion milk’ is in focus.

T  Press the Rotary Switch.

‘1 portion milk’ appears and hot steam is discharged from the cappuccino frother.

T  Remove and empty the water tank.

T  Turn the Rotary Switch until ‘60 sec.’ is displayed.

Steam will continue to be discharged from the cappuccino frother until the system is empty.

‘Fill water tank’

T  Press the On/Off button Q.

Your JURA is switched off.

Disposal Please dispose of old machines in an environmentally neutral way.

H

Old machines contain valuable, recyclable materials which should be recycled. Please therefore dispose of old machines via suitable collection systems.

43

44

Voltage

Power

Conformity mark

Energy consumption

‘Save energy’ / ‘Active’

Energy consumption

‘Save energy’ / ‘Inactive’

Pump pressure

Holding capacity of water tank

Holding capacity of bean container

Holding capacity of coffee grounds container

Cable length

Weight

Dimensions (W × H × D)

220–240 V ~, 50 Hz

1450 W

A approx. 6 Wh approx. 11 Wh static, max. 15 bar

2.1 l

250 g max. 16 portions approx. 1.1 m

10.7 kg

28.5 × 34.2 × 43.3 cm

10 Index

10 Index

A

Adding products to the start screen 25

Addresses 48

Adjusting the product settings 24

Aroma preservation cover

Bean container with aroma preservation cover 4

Automatic switch-off 26

B

Bean container

Bean container with aroma preservation cover 4

Cleaning 38

Filling 10

Bus bar

Technical data 44

Button

On/Off button 5

P button (programming) 5

C

Caffè latte 17

Cappuccino 17

Cappuccino frother cleaning

Cleaning the milk system 32

Changing the product assigned to a button

25

CLARIS Smart filter cartridge

Change 34

Insert 34

Cleaning

Bean container 38

Machine 35

Coffee 16

Two coffees 16

Coffee grounds container 4

Coffee spout

Height- and width-adjustable coffee spout 4

Connect accessory 14

Consistency of grind

Adjusting the grinder 19

Grinder adjustment switch 4

Contact details 48

Cover

Bean container 4

Filler funnel for ground coffee 4

Storage compartment 4

Water tank 4

Cup grille 4

Customer support 48

D

Daily maintenance 21

Descaling

Machine 36

Water tank 39

Dismantling

Cappuccino frother 33

Dismantling and rinsing the cappuccino frother 33

Display 5

Display messages 40

Display settings 28

Disposal 43

Double product 16

Drip tray 4

E

Emptying the system 43

Energy-saving mode 27

Errors

Troubleshooting 41

Espresso 16

Two espressi 16

Espresso macchiato 17

F

Factory settings

Restore factory settings 29

Filler funnel

Filler funnel for ground coffee 4

Filling

Bean container 10

Water tank 20

Filter

Change 34

Insert 34

First-time use 11

With filter cartridge activation 12

Without filter cartridge activation 13

45

10 Index

Flat white 17

Frother

Cappuccino frother 4

G

Grinder adjustment switch 4

Ground coffee 17

Measuring spoon for ground coffee 4

J

I

H

Homepage 10

Hotline 48

Hot water 19

Hot-water spout 4

Instant coffee

Ground coffee 17

Interchangeable milk spout 4

Internet 10

JURA

Contact details 48

Internet 10

L

Language 29

Latte macchiato 17

M

Machine

Cleaning 35

Daily maintenance 21

Descaling 36

Regular maintenance 21

Rinsing 31

Setting up 10

Switching off 22

Switching on 20

Mains cable 4

Maintenance 31

Daily maintenance 21

Regular maintenance 21

Measuring spoon for ground coffee 4

Messages, display 40

Milk

Connecting milk 14

Milk spout 4

Milk system

Cleaning 32

Milk system rinsing 32

P

Permanently setting the water for the cup size 18

Permanent settings in programming mode

23

Personalising products 25

Preparation 15, 17

At the touch of a button 15

Caffè latte 17

Cappuccino 17

Coffee 16

Espresso 16

Espresso macchiato 17

Flat white 17

Ground coffee 17

Hot water 19

Latte macchiato 17

Ristretto 16

Two coffees 16

Two espressi 16

Two ristretti 16

Two speciality coffees 16

Using the product selector 15

Preparation options 15

Problems

Troubleshooting 41

Product selector view 15

Product settings

Adjusting 24

Programming mode 23

Adding products to the start screen 25

Automatic switch-off 26

Display settings 28

Duplicating products 25

Energy-saving mode 27

Language 29

Querying information 30

Restore factory settings 29

Setting the water hardness 27

Unit for amount of water 28

Proper use 6

46

Q

Querying information 30

R

Regular maintenance 21

Rinsing

Machine 31

Ristretto 16

Two ristretti 16

Rotary Selection 15

Rotary Switch 5

S

Safety 6

Safety information 6

Service socket 4

Settings

Permanent settings in programming mode 23

Setting up

Setting up the machine 10

Short operating instructions 10

Spout

Hot-water spout 4

Switching off 22

Switching on 20

Switch-off

Automatic switch-off 26

Symbol description 3

T

Technical data 44

Tel 48

Transport 43

Troubleshooting 41

Two products 16

U

Unit for amount of water 28

Use, First-time 11

W

Water hardness

Determining the water hardness 10

Setting the water hardness 27

Water tank 4

Descaling 39

Filling 20

Website 10

Wireless connection 14

10 Index

47

J72926/J6-J600/en/201608

11 JURA contact details / Legal information

11 JURA contact details / Legal information

JURA Elektroapparate AG

Kaffeeweltstrasse 10

CH-4626 Niederbuchsiten

Tel. +41 (0)62 38 98 233

@ You will find additional contact details for your country at www.jura.com.

Directives

Technical changes

The machine complies with the following directives:

U

2014/35/EU – Low Voltage Directive

U

2014/30/EU – Electromagnetic Compatibility

U

2009/125/EC – Ecodesign Directive

U

2011/65/EU – RoHS Directive

We reserve the right to make technical changes. The diagrams used in these instructions for use are for illustration purposes only and do not represent the original colours of the machine. Some details of your JURA may vary.

Feedback Your opinion is important to us! Use the contact details at www.jura.com.

Copyright The instructions for use contain information which is protected by copyright. It is not permitted to photocopy these instructions for use or translate them into another language without the prior written consent of JURA Elektroapparate AG.

48

advertisement

Related manuals