Hannspree | AD40UMMB | Specifications | Hannspree AD40UMMB 38.5" Full HD Black LED TV

Hannspree AD40UMMB 38.5
Regulatory Information.......................2
Resetting to Factory Default
Description of Warning Symbols.......2
Settings.........................................14
Safety Notices......................................2
3. Adjusting On-Screen Display (OSD)
Settings...........................................15
Preface. ................................................4
Warranty and Service / Repair............4
Cleaning...............................................4
1. Getting Started.................................5
• Package Contents...........................5
• Introducing the TV...........................5
• Features..........................................5
• Foot Stand Installation.....................6
• Disconnecting the Stand. ................6
• Installing the Wall Mount Kit............7
• Control Panel...................................8
ENGLISH
Contents
• On-Screen Menus Selection. ........16
• Media Center Menu.......................21
Viewing Photos.............................21
Playback Music.............................22
Watching Videos...........................22
• Time Shift Function........................22
• PVR (Personal Video Record).......23
4. Troubleshooting............................24
5. Support Timing..............................25
6. Specifications................................25
• Input and Output Jacks. ..................9
• Remote Control.............................10
2. Setting up your TV.........................11
• Power Connection......................... 11
• Rear Connections.......................... 11
• Using the TV..................................12
Turning the TV On and Off............12
Running Setup Wizard..................12
Selecting Your Content Source.....13
Performing an Automatic Channel
Search..........................................13
Setting Up Your Favorite
Channels.......................................13
Adjusting the ECO Dynamic
Backlight.......................................14
Using the PAP Function................14
Customizing the Input Settings.....14
Changing Your Location................14
1
ENGLISH
Regulatory Information
CE Conformity Statement
This device is in conformity with
the requirements of EU Council
Directive 2004/108/EC on the
approximation of the laws of
the Member States relating to
electromagnetic compatibility
and Directive 2006/95/EC on
the harmonization of the laws of
Member States relating to electrical
equipment for use within certain
voltage limits. Hannspree cannot
accept responsibility for any
failure to satisfy the requirements
resulting from a non-recommended
modification of the device.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Description of Warning
Symbols
WARNING
This symbol is used to alert users
to pay attention to important
descriptions regarding usage,
maintenance (repair), and
additional important information
related to this TV.
CAUTION
This symbol is used to alert users
to the risk of electric shocks due
to dangerous and uninsulated
components.
Safety Notices
Installation Safety Notes
Location
Avoid allowing the TV to get
prolonged exposure to sunlight or
other strong sources of heat. Leave
sufficient distance between the
TV and the wall to provide enough
space for the emission of heat.
To reduce the risk of fire
or electric shock, do not
expose this apparatus to
rain or moisture. Apparatus shall not
be exposed to dripping or splashing
and no objects filled with liquids,
such as vases, shall be placed on
the apparatus.
2
These servicing
instructions are for use by
qualified service personnel
only. To reduce the risk of electric
shock, do not perform any servicing
other than that contained in the
operating instructions unless you
are qualified to do so.
To prevent the spread of
fire, keep candles or other
open flames away
from this product at all times.
Installation
• Do not place the TV in locations
where there is excessive steam
or dust.
• Avoid blocking the TV’s vents, do
not place the TV on a bed, sofa,
carpet, or in a sealed cabinet.
• Install the outdoor antenna away
from power transmission lines to
avoid possible danger.
Personal Safety
• To avoid overloading the power
supply, never plug too many
electrical devices into an outlet,
power strip, or extension cable.
• Dangerous high-voltage electric
power components are located
inside the TV. To avoid electric
shock, do not disassemble the
casing.
• Do not place or drop metals, small
objects, or flammable materials
into the vent of the TV.
• If the TV is dropped, falls down,
or is otherwise damaged, unplug
the power cord immediately and
contact an authorized service
technician.
• If any fluid is sprayed or dropped
into the TV, contact an authorized
service technician.
• The screen of the TV is made of
glass. Avoid hitting or scraping
it. If the screen is broken, do not
touch the broken glass.
• Do not allow children to use the
TV unattended.
• Be careful when disconnecting the
power plug. Hold the plug. Do not
attempt to disconnect the plug by
pulling on the power cord.
• Batteries shall not be exposed to
excessive heat such as sunshine,
fire or the like.
• A warning that excessive noise
when using earphones and
headphones can cause a loss of
listening.
Trademark Notice
Hannspree products
incorporate HighDefinition Multimedia Interface (HDMI™)
technology.
HDMI, the HDMI Logo, and HighDefinition Multimedia Interface are
trademarks or registered trademarks
of HDMI Licensing LLC in the United
States and other countries.
Manufactured
under license from
Dolby Laboratories. Dolby and the
double-D symbol are trademarks of
Dolby Laboratories.
The “HD TV” Logo and “1080p”
qualifier Logo are trademarks of
DIGITALEUROPE. (AD40U)
“DVB and the DVB logos
are trademarks of the DVB
Project”.
“The Freeview words and logos are
trade marks of DTV Services Ltd
and are used under licence. © DTV
Services Ltd.”
The CI Plus Logo is a trademark of
CI Plus LLP.
• Where the mains plug or an
appliance coupler is used as the
disconnect device, the disconnect
device shall remain readily
operable.
• If the remote control is not used
for a long period, remove the
batteries and store them properly.
• Handle damaged or leaking
batteries carefully, and wash
hands with soap if they come
in contact with leaked chemical
fluids.
• If your remote control has two
batteries, do not mix new and
old batteries, or the life of the
new batteries will be shortened.
Chemical fluids may leak from the
old batteries.
• Danger of explosion if battery
is incorrectly replaced. Replace
only with the same or equivalent
type recommended by the
equipment manufacturer. Discard
used batteries according to
manufacturer’s instructions.
• Refer to your local recycling or
waste disposal rules and contact
a local waste disposal vendor to
dispose of used batteries.
• The remote control cover may
have a magnet in it, so do not
place magnetic sensitive items
such as watches, credit cards, or
flash media close to the cover.
• Do not use force when pulling the
remote control cover open; you
may damage the hinge.
ENGLISH
Copyright
© Copyright 2012 Hannspree, Inc.
All rights reserved. This manual is protected by copyright and distributed under licenses restricting its use, copying
and distribution. No part of this manual may be reproduced in any form by any means without the prior written
authorization of Hannspree. The TV described in this manual may include copyrighted software of Hannspree (or
other third parties). Hannspree (or other third parties) preserves the exclusive rights for copyrighted software, such
as the right to distribute or reproduce the copyrighted software. Accordingly, and to the extent allowed by applicable
law, any copyrighted software contained in the product described herein shall not be distributed, modified, reverse
engineered, or reproduced in any manner without the prior written authorization of Hannspree (or of other third
parties).
The Hannspree logos presented herein are trademarks of Hannspree. All other product names, trademarks or logos
mentioned herein are used for identification purpose only, and may be the trademarks or registered trademarks of
their respective owners.
The purchase of the product described herein shall not be deemed to grant, either directly or by implication, estoppel
or otherwise, any license under the copyrights, patents, patent applications or trademarks of Hannspree, except for
the normal, non-exclusive use that arises by operation of law in the sale of a product.
RECYCLING INFORMATION
We, the Hannspree care very much about our environment protection strategy and firmly believe that it helps us have
healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life.
These devices contain recyclable materials, which can be re-decomposed and re-integrated into brand-new marvels.
On the contrary, other material can be classified to hazardous and poisoned substances. We strongly encourage you
to contact the provided information to recycle this product.
For more information, please visit
www.hannspree.com/
According to WEEE regulation, this TV can’t be handled as normal trash in Europe when it is out of usage.
Please refer to the recycle information from our website to handle it.
3
ENGLISH
Notes:
• The LED TV is for entertainment use only and visual display tasks are excluded.
• This device uses a VGA connector to connect to a PC. To reduce the influence of main frequency on the source
signal, use a VGA monitor cable with ferrite shield.
Preface
Thank you for purchasing a Hannspree LED TV. Your new TV will allow you to enjoy superior audio and video while
enriching your lifestyle with advanced technology.
Please carefully read this manual in its entirety before setting up, using or operating your TV. To ensure the safe and
correct installation and operations of the TV, it is important that the safety and operation instructions in this manual
are followed.
This instruction manual is designed to assist you in setting up and using the TV. The information in this manual
has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The
information in this manual is subject to change without notice.
To the extent allowed by applicable law, Hannspree, Inc. (“Hannspree”) shall not be liable for direct, indirect, special,
exemplary, incidental or consequential damages arising from any defect or omission in this manual, even if advised
of the possibility of such damages in advance.
Warranty and Service / Repair
For complete warranty service information, please refer to the “Warranty Card” enclosed with your TV.
Service and Repair Information for United Kingdom:
Should the need for service arise, please contact HANNspree Technical Service Center and refer to the warranty
card for the Terms and Conditions.
Please visit HANNspree Europe Website:
http://www.hannspree.com/eu
and go to the “Service” – “Repair Service” section.
Packing Material Disposal:
Please refer to your local laws and directives to ensure an environmentally safe disposal.
Keep this manual for later use.
Cleaning
Instruction for cleaning the TV
1 Clean your TV frequently with a soft cloth to remove dust and dirt. More persistent dirt can be removed with a moist
cloth with soft soap.
2 Do not use detergents or any other aggressive cleaning. This might damage the housing or screen surface.
4
ENGLISH
1. Getting Started
Package Contents
Use
r's M
anu
al
Make sure the following components are included in the box. Please contact Hannspree Customer
Service immediately if anything is missing or damaged.
Quick
GuideStart
Warra
nt
y Card
TV
User’s manual
Quick start guide
Warranty card
Remote control
and batteries
SCART adapter
TV stand
Screws
Simple screwdriver
TV column
Introducing the TV
You can watch DVB-T, DVB-C broadcast, cable, or digital television channels, and easily connect a
VCR, STB or DVD player to the SCART, HDTV (Component), and HDMI input ports (location of these
ports depends on model). You can also use the TV as a monitor for your PC by connecting it through
the VGA port.
Convenient control buttons located on the TV and a handy remote control let you change channels,
adjust the volume, and change display settings through an easy-to-use on-screen display menu system.
The built-in stereo speakers provide full rich sound and a convenient audio output port lets you connect
to an external audio system or earphones.
Features
• TV Tuner: Built-in TV Tuner (analog, DVB-T,
DVB-C)
• Audio/ Video support:
– SCART input
– VGA (PC) input
– HDMI inputs
– HDTV (Component) input
– R/L audio inputs
– VGA(PC) audio input
– 3.5 mm stereo earphone output
– SPDIF output
• On-Screen Display (OSD) menu system
• Teletext (TV RF+SCART) 1.5v. with 1000
pages memory
• Built-in stereo speakers
• Image Enhancement Technology
– 3:2/2:2 pull down (24P)
– 3D Comb Filter
• Noise Reduction
• Advanced 3D de-interlacing
• Edge Enhancement
• HD TV 1080P (38.5”)
• PVR and Time Shift functions
Note:
• The supporting devices mentioned in this manual may vary on different models. For more information, please
refer to the manufacturer’s user manual or the Quick Start Guide of your TV model.
5
ENGLISH
Foot Stand Installation
1
Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
n Install only with another person’s assistance.
n Make sure to distinguish between the front and back of the stand when assembling them.
2
Attach the TV column to the back of the TV and secure
it with the included screws.
3
Attach the TV column and foot stand and secure it
with the included screws. Please fasten with a cross
screw driver.
Disconnecting the Stand
1
Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
2
Remove the screws and detach the stand from the TV.
Installing the LED TV requires special skill that should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. Hannspree bears no
responsibility for improper mounting or mounting that results in accident or injury. You can ask a
qualified service personnel about using an optional bracket to mount the TV to the wall.
6
ENGLISH
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on
installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician
for assistance when installing the wall mounted bracket. Hannspree is not responsible for any damage
to the product or injury to yourself or others if you select to install the TV on your own.
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal
injury due to electric shock.
n
VESA-compatible wall bracket
(WxH)
Mount holes
number
Screw type
Maximum loading
200x200 mm
4
Metric 4 x 12 mm
60 kg
1
Purchase a VESA compatible wall bracket (please refer
to the table above).
2
Locate your ideal TV position on the wall.
3
Fix the wall bracket firmly on the wall.
4
Secure the TV to the bracket using the 4 mount holes on
the back and center of the TV.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper
ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the
internal temperature of the product. Install the product so that the required distances shown in the figure
are kept.
n
When using a stand or wall-mount, use parts provided by Hannspree only.
When installing the product with a stand
When installing the product with a wall-mount
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
Note:
• Please read the instructions of your specific wall bracket to properly wall mount the TV.
7
ENGLISH
Control Panel
1
2
3
4
5
6
No.
1
2
8
Description
Button
Function
P
Press to increase the program number or move upward to
the previous item on the OSD menu.
During standby mode, press to turn the TV on.
P
Press to decrease the program number or move downward
to the next item on the OSD menu.
During standby mode, press to turn the TV on.
VOL +
Press to increase the volume or move to the right on the
OSD menu.
VOL -
Press to decrease the volume or move to the left on the OSD
menu.
Program select
Volume adjust
3
Menu
MENU
Press to turn the on-screen display (OSD) menu on / off.
4
Input
INPUT
Press to confirm the selection on the OSD menu.
5
Power
6
Light sensor and Remote IR
sensor
Press to turn the TV on or off.
Used to detect the current level of visible light in the
surrounding environment.
Receive incoming remote control commands.
ENGLISH
Input and Output Jacks
Please refer to the front cover illustration for the Input & Output location.
No.
Description
1
SPDIF
2
Earphone Output
3
CI
Connector
SPDIF
Function
Connect to a digital audio output device such as
a home theater.
Connect to earphones or external speakers with
built-in amplifier.
CI SLOT
Connect to a CI device (the CI slot as CI+).
HDMI
1
4
HDMI 1/HDMI 2/
HDMI 3 Input
Connect an HDMI equipment or an HDMI-DVI
adapter cable to devices such as a DVD player
or set-top box.
2
3
5
USB
6
VGA (PC IN)
7
Cable/Antenna
USB
Connect to a USB device such as a USB flash
drive or USB hard disk drive.
Connect to a PC’s VGA port.
VGA
Connect to an antenna or cable TV.
PC IN
CABLE/ANTENNA
8
DTV/TV
SCART Adapter
Connect to an external device, such as a VCR,
STB, or a DVD player using the included SCART
adapter cable.
ADAPTER
9
PC Audio Input
10
Component Inputs
SCART
Connect to a PC’s line / audio port.
AUDIO
VIDEO Pr
Pb
PC IN
Y
COMPONENT
R-AUDIO-L
Connect to an external device, such as a VCR,
STB, or a DVD player.
9
ENGLISH
Remote Control
1 Source
Press to select the input
signal type selections.
2 Keypad
Press to select a program
directly. Press 0-9 to enter
the program numbers (press
1 and 0 for program 10).
1
3
4
4 Menu
Press to access the main
menu, return to the previous
menu, or exit the menu
screen.
6
7
6 Option
Press to display the Quick
Access menu: Picture preset,
Sound preset, Time shift,
PVR, Schedule list, and
USB.
7 Info
Press to display program
information (if available).
12 Power
Press to turn the TV on or off.
2
3 ECO
Press to toggle ECO
dynamic backlight setting.
5 Arrows
p q To navigate in the
main menu, to select menu
options, to switch to the
previous or next photo, song,
or video in USB mode.
t u (*Zoom +-) To navigate
in the main menu; to set
functions and change values.
u can also be used to open
the corresponding submenu.
* To select the picture format.
12
5
8
9
10
11
press to select a subtitle
language available for
selected digital TV program.
13 Guide
Press to display detailed
13
programming information for
channels (only for DTV).
14
14 Exit
Press to exit the menu screen
15
or Teletext.
16
15 OK
Press to enter a submenu or
17
activate a setting; to freeze/
unfreeze the picture in digital
18
19
TV mode.
20 16 Return
Press to return to the
previous channel; to return
to the previous menu in USB
function.
8 Volume adjust
Press + to increase audio
volume. Press - to decrease
audio volume.
9 Mute
Press to toggle the sound off
and back on again.
10 Teletext mode
Press to toggle teletext on or
off.
17 Select program
Press P
to increase the
program number. Press
P
to decrease the program
number.
18 List
To display channel list.
19 TV
Press to access conventional
analogue TV mode.
20 Color buttons
Press the colored buttons to
11 Subtitle
perform specific tasks in the
With an ATV source, if teletext
OSD menu or teletext mode.
mode is activated and the
Blue (Lang): To select a
teletext has a subtitle page,
sound type available for
selected analog TV program,
press to display the subtitle
to select an audio language
page. With a DTV source,
available for selected digital
TV program.
Inserting Batteries (Battery size: AAA)
Notes:
• For best results, use the remote control within a proper distance
from the front of the TV. Do not exceed an angle of 30 degrees
when pointing at TV.
• The operational distance may be shortened when the signal
sensor is directly exposed to strong light.
• Aim the transmitter on the remote control at the signal sensor and
ensure that there are no obstacles between them.
10
ENGLISH
2. Setting up your TV
Power Connection
Insert the plug at the end of the power cord into a power outlet.
Rear Connections
See the illustration and table below for device connection instructions.
* Typical Layout
Connection Order
SPDIF
HDMI is the best way to connect a device. If it’s not
available, move down the list in order until you find a
connection that’s available on each device.
1
HDMI
3
SCART
CI SLOT
HDMI
Component
2
1
2
3
USB
VIDEO Pr
Pb
Y
R-AUDIO-L
COMPONENT
1
2
HDMI
AUDIO
ADAPTER
PC IN
SCART
CABLE/ANTENNA
DTV/TV
VGA
PC IN
Component
HDMI
1
VIDEO Pr
Pb
Y
R-AUDIO-L
COMPONENT
A
S
HDMI
2
3
USB
Use HDMI to connect
external devices when
available. If not available, use
Component.
Use COMPONENT to
connect with the AV
devices.
Pr/Cr
3
SCART
Y
AUDIO
PC IN
R-AUDIO-L
ONENT
SCART
AUDIO
ADAPTER
PC IN
SCART
Pb/Cb
Y
R
L
Antenna/Cable
Use this connection when you need to connect directly to
an antenna or cable system instead of using a cable box.
CABL
D
Use SCART to
connect with the
AV devices that are
equipped with the
SCART connectors
using the included
SCART adapter
cable.
AUDIO
ADAPTER
PC IN
SCART
CABLE/ANTENNA
DTV/TV
RF Coaxial Wire (75 Ω)
VGA
PC IN
Be careful not
to bend the
copper wire.
Cable TV
Antenna
Or
11
ENGLISH
Using the TV
Turning the TV On and Off
1
Press
on the control panel or remote control to turn the TV on.
2
Press
again. The power LED turns red, indicating that the TV is off.
Running Setup Wizard
The Setup Wizard is displayed on the screen when you turn on your LED TV for the first time.
Note:
• Press p/q on the remote control to move through the menu. Press OK to select.
1
The Wizard appears to guide you through
the initial setup. Press OK to start.
Initial Setup
2
Welcome
Select your language for the on-screen
display (OSD) menu.
Initial Setup
Language
Please select your language:
English
Welcome to use the Wizard for Initial Setup !!
Please press [OK] to start the wizard.
Hrvatski
Dansk
Back
3
4
Select your country.
Initial Setup
Select
Next
Exit
Select your tuner mode.
Initial Setup
Country
Exit
Tuner Mode
Please select your tuner mode:
Please select your country:
Spain
Air
Finland
Cable
France
United Kingdom
Italy
Back
5
Select
Next
Exit
Select Scan and press OK for channel
scan.
Initial Setup
Back
Exit
Channel Scan
First, please connect antenna.
6
Select
Next
Exit
Exit
The channel scan may take a while to
complete.
Initial Setup
Channel Scan
The channel scan may take a while to complete.
Start channel scan now?
If you skip this step, the channel scan could be performed in Menu.
Status: Scanning.
Analog channels: 0
Digital channels:0
Scan
Skip Scan
8%
Back
12
Select
Next
Exit
Exit
Exit
Cancel
Once the automatic search ends, select
your location.
Initial Setup
Location
8
Press OK when initial setup is completed.
Initial Setup
ENGLISH
7
Complete
Please select your location:
Home
Congratulations !!
Shop
Completed Initial Setup.
Please press [OK] to exit.
Back
Select
Next
Exit
Exit
Back
Note:
• In Home mode, TV will be powered off
automatically if there is no operations in 4 hours.
Selecting Your Content Source
You can watch cable or broadcast TV, play DVD or connect to your PC.
To select the source signal:
• Press Source on the remote control. The Input Source menu
appears.
• Press p/q to highlight the desired source, then press OK to
confirm.
Source
TV
CMP
No label
AV
No label
VGA
No label
HDMI1
No label
HDMI2
No label
HDMI3
No label
Performing an Automatic Channel Search
Before using the TV to view programs, you need to activate the channel search first.
1
2
3
4
5
6
Press MENU on the control panel or press Menu on the remote control to enter the TV menu.
Select Tuner mode.
Select Channel install > Automatic search.
Select Country and press OK.
Select the signal type.
Press OK/u on the remote control to run the channel search.
Setting Up Your Favorite Channels
1
2
Press LIST.
3
Press the blue button to start to edit your favorite list. Press p/q to scroll through the channel list
Press the yellow button to enter Channel list selection. Press p/q to select the favorite list you
want to set up your favorite channels. Then press OK to enter the selected list.
and press OK to select it.
4
n
Repeat this procedure to setup other favorite channels.
Press LIST/Exit to exit.
13
ENGLISH
Adjusting the ECO Dynamic Backlight
1
2
3
4
Press Menu on the remote control to display the main menu.
Select Picture > ECO Dynamic back light.
Press t/u to select the desired setting. At this time, the Picture preset option under Picture will be
set at Personal synchronically.
Press Exit to close the menu.
Using the PAP Function
1
Press Menu on the remote control to display the
2
Select Setup > PAP and press OK/u to enter its
3
To activate the PAP function, press t/u to select
4
5
6
Press t/u to set the position of the TV window.
Focus window position indicator
main menu.
submenu.
On.
Press t/u to toggle the focus window.
When focus is on TV window, the digit buttons and P
windows, P
/P
/P
work in TV. When focus is on other
can change available extension sources.
Customizing the Input Settings
1
2
3
4
5
Press Menu on the remote control to display the main menu.
Select TV > Input settings and press OK/u to enter its submenu.
Press p/q to select a connector your equipment is connected to.
Press t/u to select the device type that is attached to this connector.
Press Menu to return to the TV menu.
Note:
• After configuring the above setting, the selected source label will be displayed after the name selected in the
source list.
Changing Your Location
1
2
3
4
Press Menu on the remote control to display the main menu.
Select Setup > Location.
Press t/u to select your location (Shop or Home).
Press Exit to close the menu.
Resetting to Factory Default Settings
1 Press Menu on the remote control to display the main menu.
2 Select TV > Reset and press OK/u to enter its submenu.
3 Use the digit buttons to enter the password.
4 Press ◄/► to select OK and press OK to confirm.
5 The Initial setup menu appears. Follow the on-screen instructions.
Note:
• The default password is 1234.
14
ENGLISH
3. Adjusting On-Screen Display (OSD)
Settings
The On-Screen Display (OSD) menu system provides a quick and simple method to adjust the TV
settings. The OSD menu can be accessed conveniently through the buttons on the remote control.
Before going into details of each OSD option, you may get acquainted with the placement of the OSD
system:
Main Menus:
Display the main menus.
Picture
Picture
Sound
TV
Setup
Personal
Picture preset
Brightness
52
Contrast
90
Saturation
55
Sharpness
4
Enter
ECO Dynamic back light
Auto
Select
Color temperature
Cool
Menu
Exit
Screen mode
16:9 format
Exit
Exit
Auto format
On
OK
Parental
Instructions:
Adjustable Options:
Quick instructions for adjusting the
settings.
Function
Display the setting/value of the adjustable
options.
TV Control Panel
Remote Control
OSD Menu
MENU
Menu
Up
P
Arrow p
Down
P
Arrow q
Select/ Increase
VOL +
Arrow u
Select/ Decrease
VOL -
Arrow t
Return
MENU
Menu
15
ENGLISH
On-Screen Menus Selection
Follow the instructions indicated on the left side of the OSD Function Menu.
• Press P
/P
on the control panel or p/q arrow keys to scroll through the menus.
• Press VOL + on the control panel or the u arrow key to enter a correspond submenu.
• Press VOL +/VOL - on the control panel or the t/u arrow keys to adjust the desired setting.
• Press MENU on the control panel repeatedly or Exit to exit the OSD menu.
Picture
Option
Description
Picture preset
Select a preset view option optimized for different viewing
conditions (ECO/Vivid/Studio/Personal/Movie).
Brightness
Adjust the base level of the signal in the picture (0~100).
Contrast
Adjust the gradient of the video signal (0~100).
Saturation
Adjust the color intensity (0~100).
Tint
(only shown on NTSC system)
Adjust the balance of the red, green, and blue colors of the
display (-32~32).
Sharpness
Adjust the sharpness or softness of the display (0~7).
Eco Dynamic back light
Select the ECO Dynamic back light setting
(Auto/Low/Middle/High).
Color temperature
Select the color temperature in the display
(Normal/Warm/Cool).
Screen mode
16
Select the aspect ratio of the display
(Cinerama/ 14:9 Zoom/16:9 Zoom/16:9 Zoom up/
16:9 format/ 4:3 format/Wide Zoom/Zoom 2/Wide Zoom 2/
Stretch Zoom).
Cinerama
14:9 Zoom
16:9 Zoom
16:9 Zoom
up
16:9 format
4:3 format
Wide Zoom
Zoom 2
Wide
Zoom 2
Auto format
Advanced video
VGA
(only shown on VGA source)
Stretch
Zoom
Enable/disable the aspect ratio selection automatically
(On/Off).
Noise reduction
Reduce the noise level
(High/Off/Low).
Light sensor
Enable/disable the light sensor to
detect the current level of visible light in
the surrounding environment
(On/Off).
Auto adjust (Sychronize the display automatically).
H. Position
Active Contrast
ENGLISH
Screen mode
Adjust the position of the image left and
right (0~100).
V. Position
Adjust the position of the image up and
down (0~100).
Phase
Adjust to reduce horizontal noise
(0~31).
Clock
Adjust to reduce vertical noise (0~255).
Enable/disable Active Contrast function (Automatic backlight
control function based on average luminance of input pattern)
(On/Off).
* If Active Contrast was set as On, the ECO Dynamic back light &
Light sensor function will be disabled.
Note: The options available on the OSD may vary depending on the input signal source.
Sound
Option
Description
Sound preset
Select a preset audio option optimized for different sounding
conditions (Rock/Pop/Live/Dance/Techno/Classic/Soft/Personal/
Off).
Balance
Adjust the sound balance between the left and right speakers
(-50~50).
Audio delay
Adjust the audio delay setting in millisecond (0~1000).
* This option is only available for digital channels.
Wide stereo
Enable/disable the wide stereo feature (On/Off).
Auto volume control
Select to automatically adjust the volume.
* This option will only appear when the input source is TV.
Sound type
Select the sound type setting (Stereo/Dual1/Dual2/Mono).
Type
Select the sound type mode (Normal/Visually impaired).
Visually impaired
(only available when Type is set
to Visually impaired)
Speaker
Turn on or off the speaker (On/Off).
17
ENGLISH
Visually impaired
(only available when Type is set
to Visually impaired)
Headphones
Turn on or off the headphones
(On/Off).
Volume
Adjust the volume level (0~100).
Note: The options available on the OSD may vary depending on the input signal source.
TV
Option
Description
Language
Menu language
Set the on-screen display language.
Preferred audio
language
Set the audio language.
Preferred audio
language 2nd
Set the second audio language.
Country
Select your country.
Tuner mode
Air/Cable
Select the tuner mode type.
Channel install
Automatic search
Scan the channel search automatically
based on the selected tuner mode.
Automatic update
Update the channel search
automatically if you are receiving TV
channels with an antenna.
* only on Air mode
Analog manual scan
Scan the analog channel search
manually.
Air manual installation
Scan the channel search manually if
you are receiving TV channels with an
antenna.
* only on Air mode
Cable manual
installation
Scan the channel search manually if
you are receiving TV channels with a
cable.
* only on Cable mode
Clean channel list
Reset all scanned channels.
Channel skip
Skip viewing the selected TV channel.
Channel sort
Sort the TV channel list.
Channel edit
Edit the TV channel list.
CMP Name
AV Name
Set the device name
(No label/DVD/Blu-ray/HDD/DVDR/HD
rec./Game/VCR/PC/Digital STB/HD dig
STB/Camera/Recorder/Other).
AV video input
Select the AV input type
(Auto/S-Video/RGB/CVBS).
Organiser
Input settings
18
VGA Name
HDMI1 Name
HDMI2 Name
Set the device name
(No label/DVD/Blu-ray/HDD/DVDR/HD
rec./Game/VCR/PC/Digital STB/HD dig
STB/Camera/Recorder/Other).
ENGLISH
Input settings
HDMI3 Name
Decode
Decode analog channels.
Diagnostics
Display the diagnostics information about the TV.
* Only available for digital channels.
Time Shift
Enable/Disable the time shift feature (On/Off).
Reset
Reset all LED TV operational settings to the factory default
settings (OK/Cancel).
* Restores all settings to factory defaults, including Picture,
Sound, Password, Country, Language, and TV program settings.
Note: The options available on the OSD may vary depending on the input signal source.
Setup
Option
PAP
Description
PAP
TV position
(only available when
PAP is set to On)
Subtitle
Subtitle
Enable/Disable the PAP feature (On/
Off).
Set the TV window position
(Left/Right).
Enable/Disable the subtitle
(On/Off).
Digital subtitle language Set the subtitle language for digital
broadcast.
Digital subtitle language
2nd
Subtitle
Subtitle type
Select the subtitle type mode (Normal/
Hearing impaired).
Decoding page language
Set the decoding page language for teletext display (Arabic/
Byelorussian/West EUR/East EUR/Russian/Russian-2/Greek/
Turkish/Arabic/Hebrew/Farsi).
Digital teletext language
Set the teletext language for digital broadcast.
SPDIF type
Select the SPDIF type mode (PCM/Off/Dolby D).
SPDIF Delay
(only available when SPDIF type
is set to PCM)
Adjust the SPDIF delay time to synchronize the sound with the
picture (0~1000).
T-Link
To search for CEC devices connected to the HDMI sockets of the
TV and enable one-touch play and one-touch standby between
CEC devices (On/Off).
19
ENGLISH
Common interface (the CI slot as
CI+)
Access common interface services.
* This menu option is only available if the common interface
module is correctly inserted and activated. The on-screen
applications and content are provided by your digital TV service
operator.
Location
Set your current location (Home/Shop).
Software update
Enable you to install the latest version of the software if available.
Timer
Time zone
Set the time zone.
Clock
Set the clock settings.
- Auto synchronization (On/Off)
- Power on timer (Off/Daily/Once)
- Power on channel
(only available when Power on time
is set to Daily/Once)
- Power off timer (Off/Daily/Once)
Sleep timer
Set the timer to turn the TV off at the
preset time.
Parental
Option
Description
Channel lock
Block any channels that you do not want to watch or that you do
not want your children to watch.
Parental rating
Age rating
Input lock
Select the input source that you want to block (TV/CMP/AV/VGA/
HDMI1/HDMI2/HDMI3).
Front panel lock
Enable/Disable the front panel lock feature (On/Off).
Installation lock
Enable/Disable the Installation lock (On/Off).
Max volume
Set the maximum volume (0~100).
Change password
New password
Set the new password.
Confirm password
Enter the new password again to
confirmation.
Clean all
Reset all parental settings to the factory default settings (OK/
Cancel).
Note:
• The default password is 1234.
• The Channel lock is only accessible in TV mode.
20
Prevent children from watching certain
TV programs, according to the ratings
limit set (None/4~18).
ENGLISH
Media Center Menu
Your TV is equipped with a USB connector that enables you to view photos, listen to music, or watch
videos stored on a USB storage device.
2
3
USB
USB
Device
File Format
USB 2.0 device
USB memory, USB card reader
File System
FAT/FAT 32/NTFS
Photo file format
JPEG (*.JPG)
Music format
MPEG1 (*.MP3) Bitrate: 32k, 64k, 96k, 128k, 196k, 256k, 320kbps
Sampling frequency: 32k, 44.1k, 48kHz
Video file format
MPEG1/2 (*.AVI, *.MPG, *.MPEG, *.TS)
MPEG4 (*.AVI, *.MP4)
H.264 (*.AVI, *.MP4, *.TS)
Plug a USB device to the USB connector on
the TV. When this USB device is detected, it
enters the Media Center menu directly.
Media Center
Photo
Select
Music
OK
Video
Enter
Exit
Exit
Viewing Photos
1
2
Select Media Center > Photo, then press OK to enter the main file content browser.
In the main file content browser, use p/q/t/u to select a photo or an inner file folder.
n
Select an inner file folder, press OK to enter a sub file content browser.
n
Press Menu to display the photo menu in the folder mode.
- Sort: Sort folders and photos by Date or Name.
- Edit: Copy, Paste, or Delete a selected photo.
- Parser: Select Recursive to display photos from all sub file folders.
3
Select a photo, press OK to view in full screen, and a slide show begins from the selected photo.
n
4
Press Menu to display the photo menu in the browser mode. You can play, pause or rotate the
photo, and set other related slide show settings.
Press OK to pause the slide show.
n
Press p/q to view the previous or next photo.
21
ENGLISH
Playback Music
1
2
Select Media Center > Music, then press OK to enter the main file content browser.
In the main file content browser, use p/q/t/u to select a song or an inner file folder.
n
Select an inner file folder, press OK to enter a sub file content browser.
n
Press Menu to display the music menu in the folder mode.
- Sort: Sort folders and songs by Name, Genre, Artist, or Album.
- Edit: Copy, Paste, or Delete a selected song.
- Parser: Select Recursive to display songs from all sub file folders.
3
Select a song, press OK to play, and an automatic playback begins from the selected song.
n
4
Press Menu to display the music menu in the browser mode. You can play or pause the song,
select different play mode, and set other related playback settings.
Press the related buttons on the remote control to perform the available functions shown on the
function bar at the bottom of the TV screen.
Watching Videos
1
2
Select Media Center > Video, then press OK to enter the main file content browser.
In the main file content browser, use p/q/t/u to select a video or an inner file folder.
n
Select an inner file folder, press OK to enter a sub file content browser.
n
Press Menu to display the video menu in the folder mode.
- Sort: Sort folders and videos by Type, Date, or Name.
- Edit: Copy, Paste, or Delete a selected video.
- Parser: Select Recursive to display videos from all sub file folders.
3
Select a video, press OK to play, and an automatic playback begins from the selected video.
n
4
Press Menu to display the video menu in the browser mode. You can play or pause the video,
select different play mode, and set other related playback settings.
Press the related buttons on the remote control to perform the available functions shown on the
function bar at the bottom of the TV screen.
Time Shift Function
Allows you to record the TV program so that you won’t miss the favorite part even if you go out. Before
you use the function, connect a USB device to the TV first. For the first time, you should do the disk
setup for the USB device.
22
1
Press Menu on the remote control and select TV > Time shift.
2
Press t/u to select On to switch on the time shift function, then
press Exit to close the menu.
3
Press Option on the remote control and select Time shift, then
press OK to confirm.
4
Follow the directions on the screen to do the setup.
5
After the disk setup is done, press Option and select Time shift.
Quick Access
Picture Preset
Sound Preset
Time shift
PVR
Schedule List
USB
Press OK to display the time shift menu.
n
Press the red button to pause the picture and begin the time shift.
n
Press the red button to play the recorded part.
n
When the time shift menu disappears and only the timing of the time shift remains on the screen,
you can press the red button or OK to call out the time shift menu.
n
Press the green button to fast backward or the yellow button to fast forward.
n
Press the blue button to quit the time shift function.
ENGLISH
6
Notes:
• Before you plug the USB device to TV, make sure you have backed up the data in the device to avoid the
unusual performance make your important data lost.
• We recommend you use a USB device with the free file size bigger than 1Gb and disk speed faster than 5.0M/
sec.
• The bigger file size for the time shift, the longer you can record the program.
• If changing channel in time shifting, a message prompts to let you select Yes or No. You can select Yes to exit
the time shift function and execute the channel change.
PVR (Personal Video Record)
This function allows you to record your favorite TV program to a USB device.
1
Plug a USB device to the USB connector on the TV.
2
Press Option on the remote control and select Quick access >
PVR.
3
Press OK/u to enter.
4
5
Press the red button to start recording. A PVR mini panel appears
on the screen to indicate the recording progress.
Quick Access
Picture Preset
Sound Preset
Time shift
PVR
Schedule List
USB
n
Use p/q/t/u to adjust the recording duration.
n
Press the green button to stop recording manually. Otherwise, the recording will stop
automatically when the recording duration is complete.
n
The recorded file is saved into a PVR folder in Media Center > Video > pvr.
To watch the recorded program, exit the PVR mode first and switch to USB mode. Go to Media
Center > Video and select the desired recorded file in the PVR folder. Press OK to play.
Notes:
• When CI+ card is used, this function will be disabled.
• This function is only available for digital channels.
• This function only supports USB device of FAT32 format.
• Before you plug the USB device to the TV, make sure that you have backed up the data in the device to avoid
the unusual performance that might cause data lost.
• The bigger storage size of the USB device for PVR function, the longer you can record the program.
• If you want to switch the channel or signal source during recording, it will prompt you whether to stop recording,
select OK if you want to save the recorded data. Then switch to a new channel or signal source.
• The TV can not play files normally if the file parameters exceed the system limitations, the file format is not
supported, the file is damaged, or the file can not be decoded.
• Do not unplug the USB device when the system is recording data or reading a file. This may cause system or
device malfunction.
23
ENGLISH
4. Troubleshooting
Situation
Solution
•
•
No picture and sound.
24
Connect the power cord properly.
Check if the power LED is on or not.
on the control panel or remote control.
• Press
• Press Source on the remote control to select the
connected video sources.
• Press P
or P
on the remote control or the control
panel to switch to other TV programs.
• Make sure all cables are connected properly.
No picture, or poor picture, sound
is OK.
•
•
Check the antenna and cable connections.
Adjust the Brightness in the Picture menu.
Picture is not in color.
•
Try the Picture preset function in the Picture menu.
Picture is OK, no sound.
• Make sure the source device is functioning properly.
• Make sure the audio cable is connected securely.
• Turn the mute off.
• Press VOL + on the control panel or
+ on the remote
control.
One of the speakers has no sound.
•
Cannot receive some TV channels
using cable TV.
• Try the Automatic search function in the TV menu.
Want to reset TV settings.
•
Cannot operate menus.
• If OSD items are colored in gray, the system is in a state
such that those settings are not available.
Screen image turns over.
•
Snow appears on the screen.
• Adjust the location of the antenna, placing it far from roads
or sources of interference.
• Check the antenna and the video signal line connections.
Blurred or overlapped images.
• Adjust the sharpness setting.
• Choose programs with high quality signals.
• Adjust the direction of the antenna or replace the video
signal cable.
Remote control doesn’t work.
• Make sure the battery is inserted correctly.
• Replace the battery with a new one.
• Make sure the TV power cord is plugged in.
• Make sure the path between the remote control and the
sensor is clear.
• Try operating the remote control at a closer distance to the
TV.
Adjust the Balance in the Sound menu.
Use the Reset function in the TV menu.
Make sure the video signal cable is connected properly.
PC Mode Support Timing
Resolution
Frequency
640 x 480
60Hz
ENGLISH
5. Support Timing
Video Mode Support Timing
Resolution (active dot)
HDMI/Component
480i
V
640 x 480
75Hz
576i
V
800 x 600
60Hz
480p
V
800 x 600
1024 x 768
1024 x 768
1360 x 768
1920 x 1080
75Hz
60Hz
75Hz
60Hz
60Hz
576p
720p
1080i
1080p
V
V
V
V
6. Specifications
Model No.
AD40U
DISPLAY
Screen Size
Aspect Ratio
Resolution
OSD Language
97,8 cm / 38.5” Diagonal
16:9
1920 x 1080
English, Spanish, French, German, Italy, Czech, Croatian,
Danish, Hungarian, Dutch, Norwegian, Polish, Portuguese,
Romanian, Slovak, Slovenian, Serbian, Finnish, Swedish,
Turkish, Greek, Bulgarian, Russian, Latvian, Lithuanian,
Estonian, Ukrainian
ENHANCEMENT
Sound Output (RMS Watts)
Sound Mode
Picture Format
Picture Mode
Rear Connectors
Side Connectors
8W + 8W
Rock, Pop, Live, Dance, Techno, Classic, Soft, Personal, Off
Cinerama, 14:9 Zoom, 16:9 Zoom, 16:9 Zoom up, 16:9 format,
4:3 format, Wide Zoom, Zoom 2, Wide Zoom 2, Stretch Zoom
ECO, Vivid, Studio, Personal, Movie
CONNECTION
- Tuner Input (75 Ω)
- Component Input
- PC IN: D-SUB and PC Audio
- SCART
- SPDIF Output
- USB
- HDMI 2
- Earphone Output
- HDMI 1
- HDMI 3
- Common Interface
WEIGHT & DIMENSIONS
Product
Dimensions
(L x W x H mm)
With Stand
887.9 x 231 x 587.3
Without Stand
887.9 x 91.5 x 528.1
Net Weight
With Stand
Without Stand
12.2kg
9.6kg
POWER
Main power - Operation (Max.)
Standby
Main Power
Ambient Temperature
95W
< 0.5 W
220-240V~ 50Hz
5ºC ~ 35ºC
25
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising