DT Research DT418SC-MD 4GB White Specification

DT418SC-MD

DATA CAPTURE SPECIFICATIONS:

RFID

Frequency 13.56MHz ±7KHz

Reading Range

HF RFID Reader

Barcode Scanner (2D) within 30mm depending on type of tags

ISO 15693, 14443A, 14443B, 18000-3 mode-1

Decode Mode

Scan Rate

1D: EAN/UPC, GS1 Databar, RSS, Code 39, Code 128, UCC/ EAN

128, ISBN, ISBT, Interleaved, Matrix, Industrial and Standard 2 of 5,

Codabar, Code 93/93i, Code 11, MSI, Plessey, Telepen, postal codes

(Australian Post, BPO, Canada Post, Dutch Post, Japan Post, PostNet,

Sweden Post )

2D: Data Matrix, PDF417, Micro PDF 417, Codablock, Maxicode, QR,

Aztec, GS1 Composite codes, Direct Part Marking Reading multicodes and barcodes on mobile phone screens available

2D mode: 56 images per second, auto adaptive;

Linear (1D) emulation mode: 200 images per second, auto adaptive

Horizontal: 38.9°; Vertical: 25.4° Scan Angle

Optical Resolution

Print Contrast

Versions

752 (H) x 480 (V) pixels, 256 gray levels

Down to 30%

Standard range and high density

* Specifications subject to change without notice.

DT Research, Inc.

2000 Concourse Drive, San Jose, CA 95131 http://www.dtresearch.com

Copyright © 2012, DT Research, Inc.

All Rights Reserved. DT Research is a registered trademark of DT Research, Inc.

BOG081412DT418SC-MDENG

Medical Handheld Terminal

DT418SC-MD

BASIC OPERATION GUIDE

ENGLISH

INTRODUCTION

Thank you for acquiring the DT418SC-MD, part of the

DT Research Medical Handheld Terminal line. The

DT418SC-MD offers a 3.5” outdoor-viewable touch screen, and optional RFID and barcode scanner in a compact and lightweight package. The

DT418SC-MD enables efficient point-of-service applications, inventory management, and field services. With IP54 sealed front panel, the DT418SC-MD performs well inside and outside.

The DT Research Medical Handheld Terminal provides the precise features needed to streamline operations and improve productivity, data accuracy, and service.

PACKAGE CONTENTS

2. Basic operation guide

*

3. Stylus lanyard and hand strap

The actual package contents may vary depending on the configuration acquired.

PRECAUTIONS

• Always exercise care when operating and handling the DT418SC-MD.

• Do not disassemble any portion of the DT418SC-MD as this will void any product warranty on DT418SC-MD.

• Do not use any power adapter or charging cradle other than the one provided with the device or acquired from the manufacturer or its partners.

• In the unlikely event that abnormal noise, strange odor, or smoke is present, immediately power down the DT418SC-MD and disconnect all power sources. Please report the problem to your device provider immediately.

ENGLISH

DT418SC-MD

DT418SC-MD Outlook

Left Front Back Right

F

G

H

D

E

F

Top

A

B

C

Bottom

I

D

C

D

A

B

Programmable buttons

Speaker

Suspend/ Resume

Barcode scanner

Button Functions

Enable/ disable soft keyboard

(Programmable)

Programmable

System Utility

G

H

E

F

Power button

Scanner trigger button

RFID reader

Battery cover

Hold + press

J

I

K

Stylus

Headphone jack

Mini USB port

Suspend/ Resume

Touch screen calibration

J

K

DT418SC-MD LED Status Indicators

•

•

•

•

•

1. Power Mode Status Indicator:

Blue: Device is powered on

Blinking Blue: Main battery charging

Orange: Low battery mode

Blinking Orange: Extremely low battery mode

Off: Device is powered off or in suspend mode

2. Wi-Fi Status Indicator:

•

•

•

1

2

Blue: The device has been connected to a wireless AP

Blinking blue: The device is connecting to a wireless AP

Off: Wi-Fi is disabled

ENGLISH 2

ACCESSORIES:

AC-DC Adapter PN: ACC-410-03

Used to charge handheld battery, and pass through power for charging cradle.

Handstrap PN: AAC-010-14

Designed to let user securely grip the terminal.

USB Cable PN: ACC-410-05

For data transmission and charging device battery.

SPECIFICATIONS

System

Processor

RAM

Storage

ARM 800 MHz

512MB

4GB Flash

Operating System

Display

Microsoft® Windows® CE 6.0 or Windows® Mobile 6.1

3.5” TFT-LCD with resistive touch; outdoor-viewable display

Display Resolution 240 x 320 (QVGA)

Network Interface Built-in IEEE 802.11a/b/g/n WLAN, Bluetooth 2.1 with EDR

Control Switch and Buttons 1 power button, 4 front buttons, 2 trigger buttons

Indicator

Speaker

Input/Output Ports

Power

AC/DC Adapter

Battery Type

Built-in speaker

1 mini USB (for charging and ActiveSync only), 1 headset jack

Input: 100 – 240V AC; Output: 5V DC, 2A

Li-ion battery 3760 mAh, 3.7V

Mechanical

Enclosure

Stylus

Dimensions (H x W x D)

Weight

PC+ABS, TPR

Non-electronic tip

5.5 x 3.1 x 1.4 in/ 140 x 81.8 x 36.5 mm

0.69 lbs/ 314 g

Environmental

Regulatory FCC Class B, CE, C-Tick, RoHS compliant

Water and Dust Resistance Front Panel: IP54

Temperature Operation: 0°C - 40°C; Storage: -20°C - 60°C

Humidity 0% - 90% non-condensing

* Specifications subject to change without notice.

3 ENGLISH