ZONIX

™

FP4620** / FP4630SN

Ceiling Fan

A

6˝ dia

14° Blade Pitch

Ceiling

B

A B

Fan w/6˝ downrod 15.40˝ 12.90˝

Fan w/12˝ downrod 21.40˝ 18.90˝

Fan w/18˝ downrod 27.40˝ 24.90˝

Fan w/24˝ downrod 33.40˝ 30.90˝

Fan w/36˝ downrod 45.40˝ 42.90˝

Fan w/48˝ downrod 57.40˝ 54.90˝

Fan w/60˝ downrod 69.40˝ 66.90˝

Fan w/72˝ downrod 81.40˝ 78.90˝

Blade Sweep

26˝ Blade = 54˝ dia

20˝ Blade = 42˝ dia

Net Hanging Weight: 20 lbs

7´ min

Available Finishes

Floor

INSTALLATION REQUIREMENTS:

Fan must be attached to a securely anchored electrical junction box capable of withstanding a load of at least 50 lbs.

BL Black—black

BN Brushed nickel—reversible cherry/walnut

OB Oil-rubbed bronze—reversible cherry/walnut

PN Polished nickel—reversible cherry/walnut

SN Satin nickel—reversible cherry/walnut

SN Satin nickel—satin nickel (FP4630SN)

ELECTRICAL REQUIREMENTS:

Requires a grounded electrical supply line of

120 volts AC, 60 Hz, 15 amp circuit.

Airflow / Energy Efficiency Info (120V)

Fan Speed Max RPM CFM CFM / Watts Amps Watts

High 130 4260 75 0.48

57

MOTOR SPECS:

153 x 18 motor is designed for optimal performance with this fan.

220 VAC, 50 Hz export version available.

H-Med

L-Med

93

68

3142

2363

104

125

0.35

0.27

31

19

BLADES:

Low 40 1262 155 0.17 8

A set of three 26˝ blades is included; reversible cherry walnut for FP4620** and satin nickel for FP4630SN. Optional sets of three 20˝ wood blades are available in reversible cherry/walnut (B4442CWR) and satin nickel (B4442SN) finishes—sold separately. Optional a set of three 26˝ wood blades is available in satin nickel (B4400SN) finish—sold separately. Optional sets of three 20˝ composite blades are available in cherry (BPW4442CY) and walnut (BPW4442WA) finishes—sold separately.

CONTROL OPTIONS:

CW40 fan-only wall control is included. Reversing switch located on fan housing. Instructions are provided with each control. Optional CW1, CW1SW, CW2, CW5 and CWRL4 wall controls and CRL4WH and CRL8TS remote controls with receiver unit are available—sold separately. Instructions

DOWNROD OPTIONS:

Fan comes with a 1˝ dia. x 6˝ long downrod (DR1-6). Optional downrods available in 12˝, 18˝, 24˝, 36˝, 48˝, 60˝ and 72˝ lengths.

A downrod coupler is available for installations requiring a downrod longer than 72˝. Fan can be mounted on a sloped ceiling up to 30°. Most sloped ceiling installations require a downrod longer than the standard 6˝ downrod. Optional sloped ceiling ball kits (SCB1-52) are available for slope angles greater than 30° and up to 52°. Optional close-to-ceiling kit is available as wellsold separately. Call technical support for more information.

LOCATION USE:

Fan is rated for dry locations only, however, is damp location rated if used with composite blades listed above.