ITT Out Limits LX Operating instructions

ITT Out Limits LX Operating instructions
CONTENTS
I. SAFETY AND PRECAUTIONS ....................................................................................................... 2
II. CELL PHONE OUTLINE ............................................................................................................... 4
III. PREPARATIONS .......................................................................................................................... 5
IV. DESCRIPTION OF CELL PHONE.............................................................................................. 10
V. BASIC OPERATION OF CELL PHONE ....................................................................................... 14
VI. OPERATION MENU FUNCTION ............................................................................................... 17
VII. OPERATING INSTRUCTIONS OF EDITOR ............................................................................. 38
VIII. APPLICATION OF USB STORAGE FUNCTION ..................................................................... 39
IX. APPENDIX 1............................................................................................................................... 40
X. APPENDIX 2 ................................................................................................................................ 42
1
I. Safety and Precautions
To use your cell phone safely and effectively, please read the following information before use:
 Please turn off your phone when you are near a chemical plant, a gas station, an oil depot or other
explosives.
 Please keep your phone out of the reach of children.
 To ensure safety, please use earphone during driving; Otherwise, unless emergency, you should make a
call after parking your car by the roadside. Do NOT use the phone during driving at high speed.
 Do NOT use your cell phone while in a plane. Please check whether Auto Power On is set or not before
board.
 Do not use your cell phone in a hospital to avoid interference with the normal operation of medical
equipment which may result in a medical accident. If the cell phone is used near a pacemaker, audiphone
and some medical electronic equipment, you should pay special attention to that the cell phone may
interfere with these devices.
 Auxiliaries and accessories not provided by us are excluded from the guarantee.
 Do not dismantle your cell phone by yourself. In case of a failure, please contact the service station
specified by us.
 Do NOT charge your phone with no battery. Please turn off your phone before removing the battery;
otherwise, the phone memory may be damaged.
 The phone should be charged in the environment which is well-ventilated, and should be kept away from
the inflammables and explosives.
 To avoid demagnetization, please keep your phone away from magnetic substances, such as magnetic disk,
credit card, etc.
2

Your cell phone has photo and record functions, so please use these functions following the related laws
and regulations. You may violate the law and regulation if taking photo and record without authorization.

Do NOT dispose the worn battery as common domestic rubbish. Please dispose the worn battery according
to the specified instructions where the disposal of a worn battery is clearly specified.
〈Note〉:1. The Company won't undertake any responsibility for any consequences caused by failure to
observe the above-mentioned suggestions or improper applications.
2. The provided cables are only applicable to this type of mobile phone and the provided charge;
you can also connect the phone to the PC by a USB cable to charge the phone. Do not charge the phone
by any other mode.
If any content described in this manual goes against that of your cell phone, please subject to the real cell
phone.
The original factory is entitled to modify the manual at any time without further notice.
3
II. Cell Phone Outline
The following is the view of the phone:
4
III. Preparations
Installation of your SIM card
You can apply for two different numbers offered by two network providers and get two SIM cards (users
identify cards).
With those two SIM cards, you can use various functions of this cell phone. Many parameters required for
communications are stored in the SIM cards. Personal data, including the PIN (personal identification number),
phonebook, SMS and other extra system services can also be stored in the SIM cards.
Warning:Do NOT twist or scratch the SIM card and expose it to static electricity, dust or water. If you lost
your SIM card, please contact your network operator for help.
To install your SIM cards, please turn off your cell phone first, remove the back cover, and insert the SIM
cards into the SIM card slots at the back of the phone.
Please install the SIM cards as shown below:
5
Note:The SIM card is a small object, please keep the card out of the reach of the child to avoid
swallowing the card by accident!
Installation of memory card
The phone supports T-FLASH card as to expand the memory space. Please install or take out the memory card
as per the following picture after shutting down the phone.
Note: The T-FLASH card is a small object, please keep the T-FLASH card out of the reach of the child to
avoid swallowing the card by accident!
Tip:The phone supports a memory card with capacity up to 2GB. It is recommended that only the attached
standard TF card and other TF cards of well-known brand like SanDisk and Kingston are used. Other TF cards
may be not compatible with the phone.
6
Installation of battery
Please use the original-packaging battery and accessories. Store the battery well if it is not used.
Please install the battery at shut down status.
Note:Please follow the correct procedures as shown in the figure to prevent damage to the battery contact
points.
Charge the battery
The new battery must be fully charged and discharged for several times to reach its best performance.
Charge as soon as possible when the power is used up as over-discharge will damage your battery.
Disconnect the charger and the power supply and then disconnect the mobile phone when the battery is
fully charged.
Connect your phone to the charger as per the drawing.
7
When charging, if the phone is switched on, the power quantity icon at the top right corner of the screen
will twinkle and will stop twinkling and fully display when the battery is fully charged. If the phone is switch
off, an icon will appear at the screen to show the battery is in charging.
Note:A little heating while charging is normal.
Use of battery
The performance of the battery is affected by multiple factors including your wireless loading network
configuration, signal intensity and temperature when using the phone, the function or settings you selected, the
accessories adopted for cell phone and other applied program modes.
To optimize the performance of the battery, please do as following regulations:
 New battery or a battery is left unused for a long time should be charged for a long time;
 Keep the temperature at or near room temperature when charging;
 The battery may require longer time to be full charged after being used for a long time and this is
normal. If the call time becomes too short, you may need to buy a new battery produced by original
8
factory or authorized by our company. Unqualified battery or accessories may damage your phone and
even cause danger!
 If the battery is left unused for a long time or the power is too low, it may require longer time for the
charging interface to appear, please wait patiently.
Note: For your safety and environment, please do not throw away the battery everywhere.
Warning: Explosion, fire or personal injury may be caused by any type of battery short-circuit!
PIN
PIN1 code: Personal identification code used to enter SIM card and to prevent others to use the SIM card
without your permission. If PIN1 code safeguard function of your cell phone has already been started, the
system will display ―Enter SIM card 1/2 PIN‖ to enter when switching on the phone. * will be displayed
instead of the PIN1 you entered. You can get PIN1 from your network provider together with the SIM card.
PIN2: The personal identification number use for special functions such as charging function provided by
the network.
PUK and PUK2 (8 digits)
A PUK is required to change the PIN. To change the PIN2, you need to use PUK2 (personal unlock code).
If PUK is not provided together with the SIM card, please ask for it from your network provider.
〈Warning〉
:If the PIN code is entered continuously three times, the SIM card will be locked in. Please
consult the network supplier right away to look for deciphering. Unauthorized deciphering may cause
permanent failure to the SIM card.
9
IV. Description of Cell Phone
Dialing key
Make or answer calls from SIM 1.
Short pressing the dialing key can enter SIM 1 call log under standby status.
Hang-up key & on/off key
Hang-up or reject a call.
Long press the key to switch off the phone under standby status.
Long press the key to switch on the phone when the phone is switched off.
Direction keys
Move the bar or cursor.
Enter appointed shortcut under standby status.
OK Key
Confirm an operation in menus.
Number keys
Input numbers or characters.
Long press the number keys 1to 9 to quick-dial while standby.
Long press the # key to mute and quit mute under standby mode.
Short press the * key repeatedly or long press it to enter ―P‖, ―+‖ or ―W‖ characters under dialing
interface.
Icons on screen in standby status
SIM card 1 Antenna
SIM card 2 Antenna
Alarm clock activated
SIM card 1 SMS
10
SIM card 2 SMS
SIM card 1 MMS
SIM card 2 MMS
Battery
Ringing
Vibration then ring
Vibration and ring
Vibration
Missed calls in SIM card 1
Missed calls in SIM card 2
SIM card 1 GPRS
SIM card 2 GPRS
Call divert activated in SIM card 1
Call divert activated in SIM card 2
Languages & Input Methods
English input method is provided in your phone. For details, please refer to chapters related to language
editing, where you can learn different input methods and how to switch between them.
Incoming Call alert method
The built-in vibrating motor and buzzer in your phone provides the following alerting modes:
Ring
Vibrating
Vibrating and ringing
Vibrating then ringing
11
Descriptions of nouns
 Making a national call
The simplest way to make a domestic call is to input a phone number by numeral keys and press the
dialing key. If the both SIM cards are inserted and dual SIM open, SIM card 1 dial or SIM card 2 dial
would be selected by pressing dialing keys of SIM 1 or SIM 2.
Note: Enable the function of LSK dialing function in the mune ―Call center / General call settings/
SIM card 2 call settings‖. Then you could dial from SIM 1 by pressing the calling key,and dial from SIM 2
by pressing LSK.
The screen displays animation of dialing. If dialing from SIM card 1, the screen will display ―SIM
Card 1 Dialing‖, and if dialing from SIM card 2, the screen will display ―SIM Card 2 Dialing‖.
Call status will display on the screen when the call is answered.
Press the hang-up key to end the call.
Make domestic calls: zone number + phone number + dialing key.
 Making an international call
To make an international call, long press or repeatedly short press the * key until the symbol ―+‖ is
displayed on the screen. This allows you to make an international call without knowing the prefix number
of that country (e.g. China is +86).
Then input the country code and the complete phone number. The country code is subject to
convention, e.g. Germany is 49, Britain is 44 and Sweden is 46, etc.
Make international calls: + country code + complete phone number + dialing key.
 Call extension of a fixed phone
Extensions of some fixed phones are not accessible directly, in such case, you need to dial the host
number and then the extension number. Simply insert the letter ―P‖ between the host number and the
extension number and you can call the extension. You can input a ―P‖ by long pressing or repeatedly short
12
pressing the * key.
Call extension of a fixed phone: phone number + P + extension number + dialing key.
 Make emergency calls
In any country where digital GSM is used, you can make an emergency call if your phone is covered
by the network (you can know about this by checking the signal strength indicator bar at the upper corner
of the display of the cell phone). If your network operator does not provide roaming service in that area,
the screen will display "EMERGENCY CALLS ONLY", telling you that you can make this kind of call
only. If you are in the coverage of the network, you can make emergency calls even if your SIM card is
not inserted in.
In some areas, the 112 (emergency call)service is provided by the network operator. If there is anything
abnormal, contact your network operator!
 IMEI
International Mobile Equipment Identity. You can see the bar code label printed with this number at the
back of the cell phone after you have turned off the cell phone and remove the battery. This number is also
stored in the cell phone, and can be displayed when you enter "*#06#" on the screen dial interface.
13
V. Basic operation of cell phone
Switch on
Press and hold on ―ON/OFF‖ to start up the cell phone. If no password settings are given for the SIM card
and cell phone, the phone will search for a network automatically, and when the cell phone registers a network,
the name of the network supplier will be shown on the screen. You can now answer or make a call.
If the display indicates ―Insert SIM card 1‖or‖Insert SIM card 2‖ after the start-up, please power off your
phone, and check whether your opposite SIM cards have been installed correctly or hasn't yet been installed or
not.
After plugging into a SIM card, the phone will automatically check SIM card for availability, then the
display screen will indicate the following prompts in sequence:
1) ―Enter phone lock password‖ ―― if you have started up the phone lock (default password: 1122.)
2) ―Enter SIM card 1/2 PIN‖ ―― if you have started up the SIM card 1/2 lock.
3) ―No service‖ ―― it represents the register network failure, and you can't call at this time.
4) ―Emergency Call‖ ―― it allows to call 112.
5) ―Search‖ ―― the phone is searching a network, until it finds out a suitable service network.
6) The screen displays the network operator name – it represents the network register success.
If only SIM 1 card is installed and the current mode is ―SIM card 1 only‖, the screen will display the name
of SIM card 1 provider only and that ―SIM card 2 is off‖; if only SIM card 2 is installed, the screen displays in
reverse. If only SIM card1 is installed and the current mode is ―two cards on‖, the screen will display the name
of SIM card 1 provider only and that ―Please insert SIM card 2‖; if only SIM card 2 is installed, the screen
displays in reverse.
Switch off
If you want to shut down the cell phone, please long press ON/OFF key, and after the screen displays the
power off animation, the cell phone will shut down. Please don’t shut down the phone directly by dismantling
14
the battery, and if you do like this, it is easy to damage SIM card and may cause loss of some information.
Making a call
 Enter the phone number in standby status, and press the calling key to call. If you want to hang up or
cancel the call, please press the hook up/cancel key;When the phone is connected, you can see the holding
time on the screen.
 Use the phonebook to make a call: Search the name/phone number saved in the phonebook, and press the
calling key to call.
 Redial the latest phone number:Press the calling key in standby status to search the latest list of phone
number or name. Roll over to the number or name, then press the calling key.
Answering a call
When there is a coming call, it will indicate in a mode of ring, vibration, vibration and ring,ring after
vibration or lighting according to the setup of cell phone.
To answer a call, press the calling key.
To reject a call, press on/off key.
If you have applied for calling number identification service, the calling number will show o n the screen.
If this number has already stored in the phonebook, the corresponding name of this number then will show on
the screen.
If the call is to SIM card 1, ―Call to SIM Card 1‖ will display in front of the number or name.
If the call is to SIM card 2, ―Call to SIM Card 2‖ will display in front of the number or name.
Speed dial
The phone provides 8 speed buttons, and you can define the phone numbers corresponding to these
buttons. So, as long as you long press [2 to 9] keys in standby status, you can call speedily; [1] key is specially
used for the speed dial of voice mailbox number.
<Note>: To speed dial, you have to press and hold on/press a key for 2 seconds and above, and if you
15
haven’t designated the speed dial function for that key, then you can't be successful for the call.
Sending DTMF signal
When you have set up the DTMF signal sending function, if you press the digit key and * and # key of the
keypad during the period of conversation, it will be sent out in the form of DTMF signal to the other party. If
you don't start up this function, you can't carry out the extension number calling, etc. functions probably.
Call Hold
If you have applied for the value adding of call waiting, the following function menu may appear when
you click an entry during conversation:
 Hold: Temporarily suspend the current conversation, but the conversation channel still under connection.
 End: End the current connection.
 New conversation: Enter the dial interface, and make another call.
 Phonebook: You can enter a phonebook directory.
 Information: You can enter messages directory.
 Record:You can record the current calling contents.
 Background tone:Enable or disable the background tone.
 Mute/resume: You can switch on/off microphone.
 Dual-tone multi-frequency, DTMF: You can set up whether to send out a DTMF signal.
Note:Some menu entries just appear under the specific condition, or they need support from the local
network, such as: ―Hold‖ and ―New conversation‖, etc., for detail, please consult the network supplier.
Non-response event
When the cell phone has new unread messages and missed call etc. events, the cell phone will have the
corresponding picture or icon prompt, please search these messages in time.
Connecting to voice mailbox
Your cell phone allows you to divert the incoming call to the voice mailbox, then, you will receive a
16
notice concerning the voice messages (the center number of voice mailbox should be set up properly in
advance).
VI. Operation menu function
1 Messaging
The SMS function is a network service. You may need to apply to the network operator first before you
can send and receive a short message.
Your cell phone supports the short message sending function. Short messages are sent to network SMS
center first and then sent to subscribers. If the subscriber does not turn on the phone or cannot receive messages
(storage is full), the network will keep this message temporarily. The keeping period will be determined jointly
by the message sending user's setting and the service operator.
By using the SMS, the phone can send and receive long messages. Sending long messages may affect the
charge for the messages. For details, please contact your service operator.
If the memory for message is full, a twinkling icon will remind you on the screen. You mobile phone
support dual SIM card so messages in SIM card 1 and 2 are separately stored. The reminders for full memory
of SIM card 1 and 2 will also be given separately. In such case, you need to delete at least one message in the
memory of the corresponding SIM card to receive new message.
Note:When you send a short message through SMS network, "Message sent" will be displayed on the
screen. That is to say, the phone has sent the message to the message center mailbox set by your phone. But that
isn't to say, the specified user has received the message. For more detailed information about SMS, please
contact your network operator.
1.1 Write message
17
You can create a message in this menu.
The phone supports sending a long message having over 70 characters (character number restriction for
common text messages). If a message has more than 70 characters, the message will be divided into two or
more messages and sent.
The following menu option functions by using left key are provided when you are writing a short
message:

Send to:
Enter recipient
Add from Phonebook

Insert symbol: You can insert some symbol in common use.

Input method: To select the input method for edition of a message.

Add picture: To insert an image to the message.

Add sound: To insert an audio file to the message from phone or memory card.

Add video: To insert a video file to the multimedia message.

Add subject: You can add a subject for the current message.

Slide options:
Add slide behind:To insert a new slide behind the current slide.
Add slide before:To insert a new slide ahead of the current slide.

Switch to MMS

Advanced:
1. Insert text Template: Select frequently used phases from the template and insert into message editing
interface.
2. Insert attachment: Insert ring tones, picture and images animations.
3. Insert contact number: Enter contacts and insert the found number.
18
4. Insert contact name: Enter contacts and insert the found name.
5. Bookmark:Enter the bookmark interface, insert the selected bookmark.

Save: You can save the current message into Drafts or as a template.

Details: You can check the character of the message
1.2 Inbox
The received messages are saved in Inbox. You can view all received messages in Inbox. The messages of
SIM card 1/2 are separately saved. You can perform the following operations:
◈ View: View the content of the message.
◈ Reply: To replay a received short message.
◈ Call sender: Make a call to the sender.
◈ Forward: To forward the current message to the other subscriber.
◈ Delete: To delete the current message.
◈ Delete all: To delete all messages Inbox.
◈ Move to Archive: Move the current message to archive.
◈ Filter by: Choose to view SMS by SIM1, SIM2 or all messages.
◈ Mark as unread: Mark the current message as unread.
◈ Advanced
1. Copy to phone: To copy the current short message to phone.
2. Move to phone: You can the current message to phone storage.
3. Copy all: To copy messages between phone and SIM card.
4. Move all: To move messages between phone and SIM card.
1.3 Drafts
Select ―Save‖ when you want to send a short message, then the message will be stored in draft box. The
message failed to send will be also stored in drafts box, and relative operations can be implemented.
19
1.4 Outbox
If you fail to send some messages which will be stored in Outbox.
1.5 Sent messages
The messages that have been sent successfully are stored in SentBox, and you can implement the relative
operations of the messages.
◈ View: View the content of the message.
◈ Forward: To forward the current message to the other subscriber.
◈ Delete: To delete the current message.
◈ Delete all: To delete all messages sentbox.
◈ Advanced
1. Copy to phone: To copy the current short message to phone.
2. Move to phone: You can the current message to phone storage.
3. Copy all: To copy messages between phone and SIM card.
4. Move all: To move messages between phone and SIM card.
1.6 Archive
You can implement the relative operations to the messages moved in archive.
1.7 Delete messages
You can delete all messages of Inbox, Drafts, Outbox, Sent messages and Archive.
1.8 Broadcast message
Cell broadcast is a service provided by the network operator to send messages such as weather forecast,
traffic status, etc. to all GSM subscribers in a specific area.
Note: The realization of the cell broadcast function needs the support of the network. For details, please
20
contact the network operator.
【Receive mode】
:To enable/disable the Broadcast Message.
【Read message】:When the Broadcast Message has been enabled, the received message can be read after
the corresponding server has been enabled.
【Languages】
:To enable/disable the all languages of messages received.
【Channel settings】
:To select, add, edit or delete channel numbers.
1.9 Templates
Include the templates of SMS and MMS.
1.10 Message settings
1.10.1 Text message
1.10.1.1 Message setting of SIM card 1/2:
You can set some parameters of messages in this menu. Parts of setting menu of SIM card 1/2 are separate.
【Profile setting】
:To set the name of a profile, SMS center number, message validity period, and message
type. To send a message, the SMS center number shall be provided.
Note:The number of the SMS center is provided by the network operator.
network operator.
For details, please contact the
【Voicemail server】:
Voice mail server is a network service. You may apply for this service beforehand. For detailed
information and voice mail server number, please contact your network operator.
SIM card 1/2 voice mail server:
 Call voicemail:To dial the voice mail server number stored in your voice mail server number list.
 Edit:To edit voice mail name and server number. Press OK to store your number.
21
Tip: Under the standby condition, you can call the voice mailbox number by long pressing the key "1" after
you have set the voice mailbox number.
【Common settings】
:Enable or disable delivery report and reply directory.
 Delivery report:The network reports whether the opposite side has received the message and the time
received.
 Reply path:To transfer the reply path to the network terminal. This function requires the support of
message center.
 Save sent message: Set the sent message stored in Sentbox.
【Memory Status】
:Check memory space use of SIM card or mobile phone.
【Preferred Storage】
:Appoint the directory to save the message (SIM cards or mobile phone).
1.10.2 Multimedia message
You can set parameters for MMS or view the memory status in this menu. For detailed information on
MMS parameters, please contact your network operator.
Profiles:Set the current profiles.
Common settings:
Compose:
【Slide time】
:Set play time of each page.
【Compose mode】
:Select the compose mode.
【Picture resizing】
:Enable or disable resizing of picture.
【Auto signature】
:Enable or disable auto signature.
【Signature】
:Input signature.
Sending:
【Validity period】
:Set valid time of the message in Message Center.
【Delivery report】
:Enable/disable delivery report.
22
【Read report】
:Enable/disable read report.
【Priority】
:Set priority to be sent of the multimedia messages.
【Delivery time】
: Set storage time of the message in Message Center. This setting depends on your
network provider and your setting.
Retrieve:
【Home network】:Immediate, reject, postponed.
【Roaming】:Same with main network, postponed, reject.
【Filter】:Set ―Anonymous sender‖ and ―Advertisement‖ to allow ro return messages.
【Read report】
:Send, do not send, inquire.
【Delivery report】
:Enable/disable delivery report.
Memory status: You can check the phone used rate, used and unused space.
2 Phonebook
Each contact saved in your phone contains the following useful information: three phone numbers(mobile
phone number, home number and office number), company name, email, fax number, birthday, photo, ring tone,
video connect and group(providing five mode: family, friend, important, colleague and others); each contact
save in the SIM card only contains name and phone number.
You can input at most 1000 contacts in the contacts saved in the mobile phone,for volume of Contacts
saved in SIM card, it depends on the SIM card.
2.1 View
You can view the information of chosen contact.
2.2 Send message
You can send message to contact you have chosen.
2.3 Call
You can call the contact you have chosen.
23
2.4 Edit
You can edit the information of the contact you have chosen.
2.5 Delete
You can delete all entries of the SIM cards or phone, or delete entries one by one.
2.6 Copy
You can copy all selected phone entries in SIM card 1/2, hone and memory card to each other.
2.7 Move
You can move all selected phone entries in SIM card 1/2, hone and memory card to each other.
2.8 Send contact
You can send contact to others by SMS and MMS.
2.9 Add to Blacklist
You can add current contact to Blacklist.
2.10 Mark several
You can choose several contacts at the same time.
2.11 Caller groups
You can set the name, melody, caller picture and members for all the five groups.
2.12 Phonebook Settings
【Preferred storage】:Select the storage directory of the current number.
【Speed dial】: Speed dial on/Off. You can customize the phone numbers these keys correspond to. You
24
can make a call simply by long pressing the key 2 to 9 when this function is on.
【My Number】:You can edit or send ―My name‖ numbers.
【Extra numbers】:You can set up the SIM1/SIM2 card owner number and SOS number.
【Memory status】:Memory status: To view the service condition of the phone book storage.
【Copy contacts】:You can copy all the numbers saved in SIM1/SIM2 card and mobile phone.
【Move contacts】:You can move all the numbers between SIM1/SIM2 card and mobile phone.
【Delete all contacts】:You can delete all the numbers saved in SIM1/SIM2 card and mobile phone.
3 Call history
SIM card 1/2 calling record, including:
【Missed calls】:To view the list of missed calls (requiring network service support).
【Dialed calls】:To view the list of calls you dialed or tried to dial.
【Received calls】:To view the list of 20 answered calls (requiring network service support)
【Delete call log】
:To delete call history. You can select to delete all numbers in call history, or only delete
the numbers listed in Missed Calls, Dialed Calls or Answered Calls.
【Call time】
:
Last call time:To view the duration of the last call.
Total sent:To view the duration of all dialed calls.
Total received:To view the duration of all answered calls.
Reset all time:To reset duration of all calls.
Note: The actual call and service time in the service operator's bill may vary. It depends on such factors as
network function, accounting rounding-off and tax. For details, please contact your network operator.
【Call cost】:Requires the support of the network operator.
Last call cost:To view the cost of the last call.
Total cost:To view the total cost of all calls.
25
Reset cost:To reset cost record of all calls. (Please enter PIN2 for this function.)
Max cost:To limit the cost within specified amount of pricing unit or currency unit. PIN2 is required for
setting the call cost.
Price per unit:This function is supported by your network. For details, please contact your network
operator.
【SMS counter】:View the quantity record of sent and received message.
【GPRS counter】:
Last sent:To view the volume of data sent in last linkage.
Last received:To view the volume of data received in last linkage.
All sent:To view the volume of data sent in all linkages.
All received:To view the volume of data received in all linkages.
Reset counter:To reset the GPRS counter.
4 Settings
4.1 User profiles:
Various profiles are provided for your phone. Personalize your phone according to your preference, and
then start a profile desired. The profiles available are General, Meeting, Outdoor, Indoor, Headset and Saving.
In each profile, you can set one of the following options:

Tone setup: To set the tone for incoming calls of SIM card 1/2, alarm, power-on, power-off,
messages of SIM card 1/2 and key press.

Volume: To set the volume of ring tone and key tone.

Alert type: Includes Ring, Vibrate, Vibrate and Ring, Vibrate then Ring

Ring type: To set the ring type, including Single, Repeated and Ascending.

Extra tone: Includes four types, Warning, Error, Camp-on, and Connect.

Answer mode: Provides any key answer mode.
26
Note: The phone automatically switches to the Headset mode when the headset is plugged, and it
restores to the previous mode when the headset is unplugged. Long press the "#" key when the phone is in
the standby state to switch the phone to the Mute mode. Long press it again will restore to the previous
mode.
4.2 Shortcuts:
4.2.1 Shortcuts:
Select any one shortcuts and press the left soft key<option>, the following operations can be implement:
◈
Add: To add a new shortcut menu.
◈
Edit:Set one function from the function list to replace the selected shortcut.
◈
Delete:To delete the selected shortcut menu.
◈
Delete all: To delete all shortcut menus set.
◈
Disable: To close all selected shortcut menus.
◈
Change order: To change the order of shortcut menus.
4. 2.2 Dedicated key:
You can appoint the shortcuts of direction keys. Press a key to use the corresponding function under standby
interface.
4.3 Dual SIM switch: Set the dual SIM switch mode.
4.4 Dual SIM settings:
Dual cards enable:Open card 1 and card 2
Only SIM card 1: Open card 1
Only SIM card 2: Open card 2
Flight mode
4.5 Phone settings:
27
4.5.1 Time and date:To set the current time, date and the display format.
 Set the city:To set the home city.
Note: This option needs application together with the auto time renewal, and needs the network support
for
the operation of auto time and date renewal.
 Set time/date: To set the current time and date.
 Set format: To set the time and date display format.
Note:It is required to reset the time again when you load battery again or switch on the phone again after
charging the battery if you remove the battery from the cell phone or if the battery has already been exhausted
for a very long period.
4.5.2 Schedule power on/off:Set the designated phone On/Off time.
Caution: In particular area (such as airplane compartment) forbidding the use of a cell phone, you shall
confirm that the Schedule Power On/Off function is disabled to avoid an accident.
4.5.3 Language: To select the used language for the phone.
4.5.4 Preferred input methods:To set the default input method according to your operation habit.
4.5.5 Display
◈ Wallpaper: Set the background picture in standby screen interface
◈ Screen saver: Set Standby on / off screen, and start the waiting time.
◈ Power on display: Select the system picture and user defined picture as your power on display.
◈ Power off display: Select the system picture and user defined picture as your power off display.
◈ Show date and time: Enable/disable to display the date and time.
◈ Show owner number: Can be on / off standby at the interface shows that the Phone ID information.
4.5.6 Greeting text
State:Set the greetings text on the main screen when the phone powers on.
Greeting text:Press <edit> to edit the greeting text.
28
4.5.7 Auto update of date and time: Enable or disable auto updating of date and time.
4.5.8 Misc. settings
Set the Signal LED and the brightness and time of LCD backlight.
4.6 Call settings
4.6.1 SIM card call settings:
【Caller ID】
:Includes Set by Network, Hide ID, and Send ID.
Set by network:The number of the phone will be sent as per the default mode when a call is initiated.
Hide ID:The number of the phone will not be sent when a call is initiated. If the system doesn't support
this function, it may not make a call.
Send ID:The number of the phone will be sent when a call is initiated.
Note: This function requires the network support. For details, please contact the network operator.
【Call waiting】
:To set functions like activate/deactivate and enquiry call waiting. During call holding
and making multi-party calls, this function should be activated first, and network support is required for the
specific implementation of the function.
【Call divert】
:It is a network function that can only be used when you apply for this service of the
network operator. The function can divert calls that satisfy the conditions to the other caller's phone number
you have designated.
Name
Diver all voice calls
Divert if unreachable
Divert if no answer
Divert if busy
Description
Network will divert unconditionally all your incoming calls.
To divert an incoming calls when your phone cannot be reached
(the phone is either switched off or out of network coverage).
To divert an incoming call after a certain time period during which
the call is not answered.
To divert an incoming call when you have an active call or other
29
Divert all data calls
Cancel all divert
operation is busy.
Network will divert call incoming calls (requiring support of
network).
Cancel all the divert functions.
【Call barring】
1 Outgoing calls
All calls:To restrict all outgoing calls.
International calls:To restrict international outgoing calls.
International calls except to home PLMN:While you are abroad, you can only call the numbers of
the country (where you are) and your home country (at which your service supplier is located).
2 Incoming calls:
All calls:To restrict all incoming calls.
When roaming:To restrict all incoming calls except the numbers from your local service area.
3 Cancel all:To cancel call barring. (Password for barring is required.)
4 Change barring password:Apply to the network for changing the password for call barring.
【Line switching】
:Choose Line 1 or Line 2.
【Closed user group】
:This function needs the support of network. Consult your network supplier for
details.
4.6.2 Advance settings
4.6.2.1 Blacklist
【Mode】
:Open or close the blacklist or red list .
【Black List numbers】
:You can add some numbers into blacklist.
4.6.2.2 Auto redial:
To set the auto redial as ―On‖ or ―Off‖. When your dial doesn't succeed, up to 10 redials for you to try to
30
connect a phone number.
4.6.2.3 Background sound:You can set background sound during a call.
4.6.2.4 Call time display: Display the lapsed time during a call.
4.6.2.5 Call time reminder: During a call, a sound or a periodic tone sounds every minute to keep you
informed of the call duration.
4.6.2.6 Auto quick end: You can set a limit time. If this function is enabled, the phone will hang up
automatically when the call time reaches the set time limit.
4.7 Network setup
SIM card 1/2 Network Setup
Name
Description
New Search: To search the network again.
Network
selection
Select network: The phone only load the appointing network. When the
network can’t work, the phone won’t register other network
Search mode: Auto/Manual.
Preferred
To select the preferred network.
network
4.8 Security settings:
4.8.1 SIM card security settings
4.8.1.1 SIM lock: To unlock or lock SIM(PIN).
4.8.1.2 Change password:Change the PIN/PIN2 password of SIM card 1. PIN(PIN1) and PIN2 code can be
get from your network operator.
31
4.8.2 Phone lock: This function allows you to lock/unlock your phone. Note: the default password is ―1122‖.
4.8.3 Auto keypad lock: To unlock or lock the keypad. The time for locking keypad can be set.
4.8.4 Change Password: The default password ―1122‖ of phone, message, phonebook, calling records and
privacy protection can be changed as the desired password of 4 to 8 digits.
4.8.5 Privacy Protect: To track the handset in case of lost or stolen using this function .User need to activate
this function &make the settings. The default password to set this function is ―0000‖
4.9 Bluetooth
4.10 Restore Factory Settings
You can restore some settings of the phone to factory settings. To restore the factory settings, enter the
password. The default password is ―1122‖.
5 Multimedia
5.1 Camera
With this function, you can use the built-in camera of the phone to take a photo, or adjust the camera
settings. Photos generated by the camera are in JPG format. If they have been downloaded to your PC, view
them with the right software!
When the phone has insufficient memory space for new photos, you should delete some old photos or
other files in the "File Manager" function list to release memory space for new pictures.
◈ 【Photos】
:To view a saved photo.
◈ 【Camera settings】
:To set the corresponding parameters of the camera.
◈ 【Image settings】
:To set the corresponding parameters of the photo to be shot.
◈ 【White balance】
:Adjust the white balance.
◈ 【Scene mode】
:Setting the scenario mode of the camera.
◈ 【Storage】
:To set the storage directory for photos.
◈ 【Restore default】
:To restore the settings of camera to factory settings.
32
5.2 Image viewer
The shot photos are stored in the image viewer.
Descriptions of image viewer options:
◈ View: To view a photo.
◈ Browse mode: To select the mode for browsing photos.
◈ Send: Transmitting the photo file to the multimedia message as well as the Bluetooth equipment.
◈ Use as: Use a selected photo file and you can set it as follows :Wallpaper,Screen saver,Power on
display,Power off display,Caller picture
◈ Rename: To rename the selected image or photo.
◈ Delete: To delete the selected photo.
◈ Sort by: To sort photos by the desired method.
◈ Delete all files: To delete all photos.
◈ Storage: To set the storage directory for photos.
5.3 Video recorder
Press the red icon bottom of the screen or press OK key to start or pause video recording. The recording
time is limited by the volume of the memory of the phone or the memory card. Enter the option, you can make
the following settings:
◈ Camcorder settings:Setting the related parameters of the recorder.
◈ Storage:It is able to choose the saving route of record file (cell phone or memory card).
◈ Restore default:Resume the consumer settings for recording to the original plant default.
5.4 Video player
◈ Support some avi, 3gp format’s video. The following operation can be performed to the selected
video file of .avi format:Play: To play a video file.
◈ Transfer: To transfer a video file to the desired application.
33
◈
◈
◈
◈
◈
Rename: To rename a video file.
Delete: To delete the selected video file.
Delete all files: To delete all video files.
Sort by: To sort video files by desired method.
Storage: To select the storage directory (cell phone or memory card) for a video file.
5.5 Audio Player
The operating system above WIN2000 do not need to install the drivers. When the phone is connected to
PC using USB, the selected MP3 need be copy to ―My Music‖ root directory, otherwise it can’t be played.
Descriptions of Audio Player options:
◈ Play: To play the selected MP3.
◈ Details: To view the detailed information of the selected MP3.
◈ Add to ringtones: To add the selected song to the tone library for selection.
◈ Refresh list: To update the play list of songs.
◈ Settings: To set parameters for playing MP3.
5.6 Sound recorder
To make an audio record, select the ―Audio Recorder‖. Select the "Options" for the selected record file to
perform the following operation.:
◈ New record:To record a file.
◈ Play: To play a selected record file.
◈ Rename: To rename the selected record file.
◈ Delete: To delete the selected record file.
◈ List: To view all the record files.
◈ Settings: To set the Preferred Storage, File Format and Quality for record files.
◈ Use as: Use as the prepared ringtone in user profiles.
34
◈ Send:Send a sound file to a relevant application via MMS.
5.7 FM Radio
You can receive the FM Radio channel just when plugging earphone.
5.8 Schedule FM record
Record the appointed frequency audio at the appointed time.
6 Organizer
6.1 Calendar
With this function, you can view the calendar and schedule, and you can schedule with the scheduler to set
the schedule and alert. Move the cursor to the desired date with direction keys, and the date will be highlighted
in light blue frame. If a memo has been set in the schedule of some date, the date bottom adds displaying of
schedule icon. To view all memos of a day, move the cursor to the date. In this case, the following operation
can be performed:
6.1.1 View: View the current task.
6.1.2 View all: View all tasks.
6.1.3 Add event: Add a new event.
6.1.4 Delete event: Delete items in schedule.
6.1.5 Jump to date:Move the cursor to the calendar of the specified date.
6.1.6 Go to today: To view the calendar of today.
6.2 Tasks
For creating a new memo or viewing the memos set in the schedule. You can also perform View, Add, Edit,
Delete Entry, Delete All and Transfer Date book, etc. If the alarm reminder is set up for the memo, the cell
phone will remind you with ring once the time is up, and it will display the contents of the memo settings.
6.3 Alarm
The time format of the alarm clock is the tame with the format in the clock. The alarm clock can work
35
even if the phone is switched off as long as there is enough power in the battery. Alarm time, snooze time-out
and alarm tone can be set independently for every alarm. The phone will alarm when the time reaches the set
time and current time and date will display on the screen. Press Stop to stop the alarm; press Sleep, the alarm
will pause and alarm again at the snooze time-out.Note: Your phone support alarm clock when switching off.
6.4 World Clock
Search the current time corresponding to the time zone of countries in the world
6.5 Calculator
 Eight operators, i.e. ―+‖, ―-‖, ―×‖, ―÷‖, ―m+‖, ―m-‖, ―mc‖, and "mr‖, are provided.
 Choose the Clear or press the right soft key to clear items entered. Long press the Clear or long press the
right soft key to clear all content. Press the ―Ok‖ to show the result of calculation.
Note: The accuracy of this calculator is limited, and the calculator can only be used in simple calculation.
6.6 Currency Converter
This function could help you to convert the currency. Input the number into corresponding column, and press
the LSK.
6.7 E-Book Reader
It supports the .txt-format text,and the default value is the txt files under the directory.
6.8 Back Up
You can backup the items in phonebook and the SMS. You need to insert a good memory card then to
implement the operation under this menu.
7 File manager
Phone:Support memory of about 250K.
Folders or files in the memory card or the phone can be managed by the files management template.
8 Service
8.1 STK
36
STK is a value added service provided by your network provider.
The display of function menu may differ according to different SIM cards.
8.2 Internet service
This function allows you to acquire or visit diversified services on the Internet through message or
network. The services may include entertainment, weather forecast, news, financial information, ring tone
download, stock market and other useful information. Some functions are provided by the network provider.
You will see different menus according to the services provided by the SIM card. Please contact your network
provider for more information.
【Homepage】
:Enable WAP connection and visit the home page..
【Bookmarks】:Visit or edit the bookmark.
【Recent pages】:Record the recently visited web addresses.
【Offline pages】
:View the saved web pages.
【Input address】
:Provide user-defined inputting web address.
【Service inbox】
:Save the PUSH messages received by the phone.
【Settings】
:Set parameters of WAP browser. Please consult your network provider for details of the
parameters.
 Select SIM:Those options include ―always inquire, SIM card 1 and SIM card 2‖.
 Edit profile: To edit and enable the profile function.
 Browser options: To set the wait time and whether to show images. Display the address list and select
image can be performed.
 Service message settings: Enable or disable.
 Clear cache: It may reduce speed of internet connection when there are too much data stored in the
cache.
 Clear cookies: Delete all personal information.
37
 Trusted certificates: To view the trusted certificates provided by the system.
8.3 Data account:
 GSM data——Some account data will be provided by GSM data
 GPRS——Using GSM data will provide some account information
9 Games
Provide you interesting and classical games. Please refer to help of the game for specific operation.
Game settings: You can set some sound and vibration effect when you play games.
VII. Operating instructions of editor
Your phone provides you with different input methods for the convenience of using other function. You
can enter texts by keypad at anywhere requiring entering texts. Enter function setting > Phone setting > Default
input method to choose a default input method.
Input interface key function
Press corresponding key under input interface, for example of writing message.
Numeral 1 to 9 is used to edit text contents.
Direction keys:Control the movement of cursor.
# key:Switch the input method.
* key:Enter the selecting of symbol.
Hang-up key:Retreat from the edit interface.
Smart English input
Press the numeral keys 2 to 9, the letters contained in the number and the corresponding number will appear
on the screen.
38
Enter a word
Under smart English input method, continuously press 2 to 9 keys for twice or more, the corresponding word
will appear on the screen.
For example, if you want to enter ―book‖, press the numeral keys ―2665‖, and then select the word ―book‖.
You can press the 0 key to enter a space when you need.
English letters and figure input
You can input English letters such as A , a and digit 1 by choosing different input method ―ABC、abc、
123‖ .
Symbol input
Press * key to into the interface of inputting symbol, when the phone not under the interface of symbol.
Transfer direction keys to move the cursor to desired symbol, press OK key to select it.
VIII. Application of USB storage function
Precautions before using
 Please maintain correct operation of USB equipment connection and disconnection.
 Please don't use windows formatting command to carry on the format operation to the mobile disk of cell
phone; otherwise, it will result in the damage that can't be repaired any more.
 USB operation environment:
◈ Windows2000 / XP.
◈ For other operating systems, it may require the installation of USB driver before successfully creating
the connection of PC and cell phone.
39
IX. Appendix 1
Troubleshooting
Failure
The phone fail to power
on
SIM card error
Weak signal
40
Possible cause
1、 Check that the battery is charged;
2、 Check that the battery is installed correctly.
1、 Check whether the SIM card is dirty. If the card is dirty, clean it;
2、 Reinstall the SIM card;
3、 If the SIM card is damaged, replace the SIM card.
Check that the signal intensity indicator on the screen. 4 bars indicate a
strong signal, and 2 bars or less indicate a weak signal.
Call initiation fails
1、You may set the Hide Caller ID but the network operator does not
support this service;
2、A strong signal interference may exist;
3、You may activate the Call Barring function;
4、You may activate Line 2 but the network operator does not support this
service.
Battery charge fails
1、The battery may have been excessively discharged. To charge the battery,
it is necessary to connect it to a charger for a certain period of time;
2、The battery may be deteriorated.
Cannot connect to the
network
1、Check whether the signal is too week or wireless interference exists
around;
2、Check whether the SIM card is installed correctly, poor connection exists,
or the SIM card is damaged. If the SIM card is damaged, please contact the
network operator.
Photos shot too dark
1、The brightness is set too low;
2、The ambient light is too dark.
41
Photos shot too blurred
1、The object shot is moving;
2、Your hand shakes when the shutter is pressed.
Photos shot is distorted
The object shot is too near to the lens.
Cannot access the
service menu
The standby picture
can’t be displayed
integrally.
The SIM card may not support the service.
Maybe the picture is extra of the size.
X. Appendix 2
Abbreviations
42
SMS
Short Message Service
EMS
Enhanced Message Service
SIM
Subscriber Identity Module
GSM
Global System for Mobile Communication
PIN
Personal Identity Number
PUK
PIN Unblocking Key
IMEI
CB
International Mobile Equipment Identity
Cell Broadcast
GPRS
General Packet Radio Service
MMS
Multimedia Message service
43
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement