LG 32LT670H, 26LT670H Owner's manual
QUICK REFERENCE GUIDE LED LCD TV Please read this manual carefully before operating your set and retain it for future reference. 26LT670H 32LT670H 37LT670H 42LT670H P/NO : MFL67415403 (1203-REV00) www.lgsolutions.com 2 LICENSES / OPEN SOURCE SOFTWARE NOTICE LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX video. ENGLISH ENG ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. “DivX Certified® to play DivX® video up to HD 1080p, including premium content.” “DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.” “Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274” OPEN SOURCE SOFTWARE NOTICE To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com . In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to [email protected] This offer is valid for three (3) years from the date on which you purchased the product. IMPORTANT SAFETY INSTRUCTIONS 3 IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. WARNING The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product. WARNING: This product contains chemicals known to the State of California to cause cancer. Wash hands after handling. ENG ENGLISH TheWARNING lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Read these instructions. yy Keep these instructions. yy Heed all warnings. yy Follow all instructions. yy Do not use this apparatus near water. yy Clean only with a dry cloth. yy Do not block any ventilation openings. Install yy in accordance with the manufacturer’s instructions. Do not install near any heat sources such yy as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the yy polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country). Protect the power cord from being walked on yy or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified yy by the manufacturer. Use only with a cart, stand, tripod, bracket, yy or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning yy storms or when unused for long periods of time. Refer all servicing to qualified service yy personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Never touch this apparatus or antenna during yy a thunder or lightning storm. yyWhen mounting a TV on the wall, make sure not to hang the TV by its power and signal cables. Do not allow an impact shock or any objects yy to fall into the product, and do not drop objects onto the screen. 4 IMPORTANT SAFETY INSTRUCTIONS ENGLISH ENG Keep the packing anti-moisture material or yy vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children. CAUTION concerning the Power Cord yy It is recommended that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV. Do not stick metal objects or any other yy conductive material into the power cord. Do not touch the end of the power cord while it is plugged in. Warning - To reduce the risk of fire or yy electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning. Do not expose to dripping or splashing and yy do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit). Grounding yy (Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. DISCONNECTING DEVICE FROM THE MAIN yy POWER Mains plug is the disconnecting device. The plug must remain readily operable. As long as this unit is connected to the AC yy wall outlet, it is not disconnected from the AC power source even if the unit is turned off. Do not attempt to modify this product in any yy way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product. ANTENNAS Outdoor antenna grounding (Can differ by country): If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and builtup static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode. Antenna grounding according to the National Electrical Code, ANSI/NFPA 70 Antenna Lead in Wire Ground Clamp Electric Service Equipment Ground Clamp Antenna Discharge Unit (NEC Article 810-20) Grounding Conductor (NEC Article 810-21) Power Service Grounding Electrode System (NEC Art 250, Part H) IMPORTANT SAFETY INSTRUCTIONS Generated Sound yy “Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product. Take care not to touch the ventilation yy openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product. If the TV feels cold to the touch, there may be yy a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen. DISPOSAL (Hg lamp only used in LCD TVs) The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority. Prevent “Image Burn” or “Burn-in” on the TV Screen If a fixed image displays on the TV screen for yy a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and is not covered by the warranty. If the aspect ratio of the TV is set to 4:3 for a yy long period of time, image burn may occur on the letterboxed area of the screen. Avoid displaying a fixed image on the TV screen yy for a long period of time (two or more hours for an LCD TV) to prevent image burn. For USA NOTE TO CABLE/TV INSTALLER This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electrical Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. ENG ENGLISH Cleaning yy When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzine. Moving yy Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV. Ventilation yy Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places. If you smell smoke or other odors coming yy from the TV, unplug the power cord and contact an authorized service center. Do not press strongly upon the panel with a yy hand or a sharp object such as a nail, pencil or pen, or make a scratch on it. Keep the product away from direct sunlight. yy Dot Defect yy The LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you are viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV. Dot Defect yy The LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV. 5 6 TABLE OF CONTENTS TABLE OF CONTENTS ENGLISH ENG 2 LICENSES 15 REMOTE CONTROL 2 OPEN SOURCE SOFTWARE NOTICE 17 GENERAL TROUBLESHOOTING 3 IMPORTANT SAFETY INSTRUCTIONS 18 SPECIFICATIONS 6 TABLE OF CONTENTS 6 Additional Information 7 INSTALLATION PROCEDURE 7 ASSEMBLING AND PREPARING 7 9 11 11 12 13 14 Unpacking Parts and buttons Setting up the TV -Attaching the stand -Mounting on a table -Mounting on a wall -Tidying cables Additional Information The Owner’s Manual and Commercial Mode Setup Guide contain detailed information on the advanced features of these TVs. To view the extended documentation, visit our website at: www.lgsolutions.com/products. From the Products page, select TVs, Systems & Solutions, then LCD TVs, then the applicable TV. Click the Literature & Downloads tab at the bottom of the TV page, and select the required document(s) from the Downloads list. FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and the receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. ASSEMBLING AND PREPARING 7 INSTALLATION PROCEDURE 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set. ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item. ENERGY AV MODE INPUT TV SAVING 1 2 4 5 7 8 9 0 FLASHBK LIST 3 6 MARK FAV VOL 3D CH P A G E MUTE MENU INFO Q.MENU ENTER BACK EXIT L/R SELECT FREEZE RATIO Quick Reference Guide Power Cord Stand Screws 8 EA, M4 x 14 (See p.11) Desk-mount Screw 1 EA, P4 x 20 (See p.12) Cable holder (See p.14) Protection cover Stand body (See p.11) Stand base (See p.11) Power Cord holder (See p.14) ENG ENGLISH Remote control, Batteries (AAA) (See p.15) 8 ASSEMBLING AND PREPARING CAUTION To ensure safety and product life span, do not use any unapproved items. yy Any damages or injuries sustained due to use of unapproved items are not covered by the warranty. yy In the case of some models, the thin film on the screen is a part of TV and should not be removed. yy NOTE The items supplied with your product will vary depending on the model. yy Product specifications and/or manual contents subject to change without prior notice due to upgrade yy of product functions. ENGLISH ENG ASSEMBLING AND PREPARING 9 Parts and buttons Remote control Power indicator Side Connection panel USB IN USB input Screen IN 3 HDMI input Buttons RJP INTERFACE RESET UPDATE GAME CONTROL /M.P.I 1 2 TV -LINK CFG R / DVI IN PTC SERVICE (SERVICE ONLY) L SPEAKER OUT (8 ) L/MONO -AUDIO- R RGB IN (PC) AUDIO IN (RGB/DVI) AV IN VIDEO RS-232C (SERVICE & EXIT_POWER) Button Description v ^ Scrolls through the saved channels. - Adjusts the volume level. + ENG ENGLISH Speakers Turns the power on or off. Rear Connection panel ANTENNA/ CABLE IN 10 ASSEMBLING AND PREPARING PORT Description RJP INTERFACE Connect to remote jack pack control output port. GAME CONTROL/ Input port for third party game Controllers./ m. p. i. Allows VOD/PPV devices or set-top boxes to control the TV. speaker out (8Ω) For use with external speakers. UPDATE Software downloads and debug mode enable/ dis-able. RESET Hardware reset to PTC microcontroller. RS232C (SERVICE & EXIT POWER) Used by third party devices. This port is used for service or Hotel mode. RGB IN (PC) Analog PC Connection. Uses a D-sub 15-pin cable (VGA cable). HDMI/DVI IN Digital Connection. Supports HD video and Digital audio. Accepts DVI video using an adapter or HDMI to DVI cable (not included). AV (Audio/Video) IN Analog composite connection. Supports standard definition video only (480i). Used for PC/DTV audio input jack AUDIO IN (RGB/DVI) 1/8” headphone jack for analog PC audio input. PTC SERVICE Used for PTC software updates. (SERVICE ONLY) ENGLISH ENG TV - LINK CFG Computer input for programming Free To Guest services. ANTENNA/CABLE IN Connect over-the air signals to this jack. ASSEMBLING AND PREPARING 11 Setting up the TV Put your TV on a pedestal stand and mount the TV on a table or wall. Attaching the stand If you are not mounting the TV to a wall, use the following instructions to attach the stand. 1 4 EA 2 M4 x 14 Stand Body Front Stand Base Caution 3 4 EA M4 x 14 Caution Tighten the screws firmly to prevent yy the TV from tilting forward. Do not over tighten. ENG ENGLISH When attaching the stand to the TV yy set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. 12 ASSEMBLING AND PREPARING Mounting on a table Securing the TV to a table 1 Lift and tilt the TV into its upright position on a table. -Leave a 10 cm (4 inch) (minimum) space from the wall for proper ventilation. 10 cm (4 10 cm Fix the TV to a table to prevent from tilting forward, damage, and potential injury. To secure the TV to a table, insert and tighten the supplied screw on the rear of the stand. inch) 10 cm 10 cm warning 2 Connect the power cord to a wall outlet. To prevent TV from falling over, the TV yy should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury. ENGLISH ENG Caution Do not place the TV near or on sources yy of heat, as this may result in fire or other damage. Adjusting the angle of the TV to suit view (Depending on model) Swivel 90±4 degrees to the left or right and adjust the angle of the TV to suit your view. 90±4 90±4 CAUTION When adjusting the angle of the TV, yy watch out for your fingers. - Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury. Caution Make sure that children do not climb on or yy hang on the TV. ASSEMBLING AND PREPARING Mounting on a wall 13 Caution Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer. 10 cm(4 inch) 10 cm Disconnect the power first, and then move yy or install the TV. Otherwise electric shock may occur. If you install the TV on a ceiling or slanted yy wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. Do not over tighten the screws as this may yy cause damage to the TV and void your warranty. Use the screws and wall mounts that meet yy the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. 10 cm NOTE 10 cm Model 32LT670H 37/42LT670H VESA Standard screw Number of screws Wall mount bracket (optional) 200 x 100 M6 4 LSW100B, LSW100BG 200 x 200 M6 4 LSW200B, LSW200BG ENG ENGLISH Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table. Use the screws that are listed on the VESA yy standard screw specifications. The wall mount kit includes an installation yy manual and necessary parts. The wall mount bracket is optional. You can yy obtain additional accessories from your local dealer. The length of screws may differ depending yy on the wall mount. Make sure to use the proper length. For more information, refer to the manual yy supplied with the wall mount bracket. 14 ASSEMBLING AND PREPARING Tidying cables Attaching the TV to a desk 1 Install the power cord holder and power cord. It will help prevent the power cable from being removed by accident. (For 32/37/42LT670H) The TV should be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. 4-Screws (not provided as parts of the product) Power cord holder Stand 2 Gather and bind the cables with the cable holder. Desk ENGLISH ENG Cable holder Caution Do not move the TV by holding the cable yy holder, as the cable holders may break, and injuries and damage to the TV may occur. REMOTE CONTROL 15 REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION Do not mix old and new batteries, as this may damage the remote control. yy Make sure to point the remote control toward the remote control sensor on the TV. (POWER) Turns the TV on or off. Q.MENU BANK CH.PREVIEW 1 4 7 INPUT DVD .,;@ ghi pqrs 2 5 8 abc jkl tuv 0 MARK 3 6 9 TV def DVD Selects the remote’s operating mode: DVD. mno INPUT, BANK INPUT: Rotates through inputs. Also switches the TV on from standby. BANK: Not functional wxyz FLASHBK MARK, CH.PREVIEW MARK: Selects a menu or option. CH.PREVIEW: Not functional CHAR/NUM CC VOL TIMER DELETE CH MUTE PORTAL INFO Selects the remote’s operating mode: TV. GUIDE P A G E Number button Enters channel numbers or other numbers required. Also supports characters. — (DASH) Selects a program number for multiple program channels such as 2-1, 2-2, etc. OK FLASHBK Tunes to the last channel or input viewed. MENU SETTINGS EXIT PIP PIPCH+ PIPCH- SWAP PIP INPUT SAP ENG ENGLISH TV Q. MENU Accesses the quick menu. 16 REMOTE CONTROL VOL Adjusts the volume level. CC, CHAR/NUM CC: Selects a closed caption. CHAR/NUM: Switches between Letter and Number input modes. Q.MENU BANK CH.PREVIEW TV 1 4 7 INPUT DVD .,;@ ghi pqrs 2 5 8 abc jkl tuv 0 MARK 3 6 9 , DELETE MUTE MUTE: Mutes all sounds. DELETE: Deletes letters and numbers. def ^ CH v, PAGE CH: Scrolls through the saved channels. PAGE: Moves to the previous or next screen. mno wxyz PORTAL Displays and removes the interactive menu. FLASHBK CHAR/NUM CC VOL TIMER DELETE CH MUTE PORTAL INFO TIMER Turns the TV off in a set amount of time. GUIDE P A G E INFO Views the information of the current program and screen. GUIDE Displays and removes the electronic program guide. Navigation buttons (up/down/left/right) Scrolls through menus or options. ENGLISH ENG OK ꔉ Selects menus or options and confirms your input. OK ꕣ (BACK) Returns to the previous level. MENU SETTINGS EXIT MENU/SETTINGS Accesses the main menu. EXIT ꕯ Clears all on-screen displays and returns to TV viewing. PIP PIPCH+ PIPCH- SWAP PIP INPUT SAP Color buttons These access special functions in some menus. VCR/DVD/USB control buttons Controls video cassette recorders or DVD players or USB. Accesses the AV devices connected to the TV; Opens the SIMPLINK menu. PIP Toggles through picture-in-picture options. PIP CH +/Changes the PIP channel. SWAP Exchanges the main/sub images. PIP INPUT Selects the connected input source for the sub-picture. SAP Analog mode: Selects MTS sound (Mono, Stereo, or a SAP) DTV mode: Changes the audio language. TROUBLESHOOTING 17 GENERAL TROUBLESHOOTING Installation Symptom Cannot direct enter channel number. Possible Cause(s) (TV in Pass-through Mode) Installer yy Menu item 028 CH. OVERIDE is set to 0, i.e., disabled (recommended setting). Possible Solution(s) If Installer Menu item 028 CH. OVERIDE is yy set to 0, only channels that are active in the TV’s channel lineup can be selected. Set CH. OVERIDE to 1 to allow access for direct keypad entry to all channels. (TV in FTG Mode) The channel entered yy Channel access is restricted to channels yy is not part of the FTG Channel Map. included in the FTG Channel Map. If necessary, make changes to the FTG Channel Map using the FTG File Manager or the FTG Configuration Application, as appropriate. Display Panel Picture Symptom No picture. Possible Cause(s) Display panel is turned off. yy Possible Cause(s) Wrong Installer Menu settings. yy Possible Solution(s) Adjust Installer Menu settings as required. yy Possible Cause(s) Remote not in TV Mode. yy Possible Solution(s) Use MODE key to select “TV”; puts remote into yy TV Mode. Point remote at TV’s IR receiver on TV. yy Move remote closer to TV’s IR receiver or darken yy room. If applicable, connect MPI cable to MPI device. yy Remove obstructions. yy Replace batteries. yy Check that “+” and “-” match in battery yy compartment. Dim room light. yy Requires compatible Installer Remote. Contact yy your LG dealer. Erratic Operation Symptom Installer Menu setup. Installer Remote Symptom Remote doesn’t work. Not aimed at IR remote sensor. yy Remote too far from IR sensor. yy MPI not connected. yy IR path to TV’s receiver obstructed. yy Weak batteries. yy Wrong battery polarity. yy Too much light in room. yy Wrong Installer Remote. yy Picture Reception Symptom Normal picture, poor or no sound. Possible Cause(s) Wrong Installer Menu settings. yy Broadcast problem. yy Possible Solution(s) Press MUTE or use Volume Up key to increase yy sound level. Try a different channel. yy ENG ENGLISH Antenna/cable not connected. yy Connections incorrect. yy MPI not connected yy Encrypted program. yy Wrong tuning band. yy Possible Solution(s) Turn TV ON. yy Power failure? yy Connect antenna/cable signal to TV. yy Check connections on TV. yy If applicable, connect MPI cable to MPI device. yy Try another channel. yy Adjust Installer Menu settings. yy 18 SPECIFICATIONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. Power requirement AC100 - 240 V ~ 50/60 Hz Television System NTSC-M, ATSC, 64 & 256 QAM Program Coverage VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 External Antenna Impedance 75 Ω Environment condition Operating Temperature 0 - 40°C Operating Humidity Less than 80% Storage Temperature -20 - 60°C Storage Humidity Less than 85% 32LT670H (32LT670H-UA) MODELS Dimensions (W x H x D) ENGLISH ENG Weight With stand 765.6 mm x 535.6 mm x 231.9 mm (30.1 inch x 21.0 inch x 9.1 inch) Without stand 765.6 mm x 475.8 mm x 68.5 mm (30.1 inch x 18.7 inch x 2.6 inch) With stand 9.2 kg (20.2 lbs) Without stand 8.0 kg (17.6 lbs) 37LT670H (37LT670H-UA) MODELS Dimensions (W x H x D) Weight With stand 867.3 mm x 592.8 mm x 321.9 mm (34.1 inch x 23.3 inch x 12.6 inch) Without stand 867.3 mm x 532.8 mm x 68.6 mm (34.1 inch x 20.9 inch x 2.7 inch) With stand Without stand Weight 10 kg (22.0 lbs) 42LT670H (42LT670H-UA) MODELS Dimensions (W x H x D) 11.2 kg (24.6 lbs) With stand 991.7 mm x 663.0 mm x 273.1 mm (39.0 inch x 26.1 inch x 10.7 inch) Without stand 991.7 mm x 604.0 mm x 55.0 mm (39.0 inch x 23.7 inch x 2.1 inch) With stand 15.5 kg (34.1 lbs) Without stand 13.5 kg (29.7 lbs) SPECIFICATIONS 19 RGB(PC), HDMI (PC) supported mode Resolution Horizontal Vertical Frequency (KHz) Frequency (Hz) 640x350 31.46 70.09 720x400 31.46 70.08 640x480 31.46 59.94 800x600 37.87 60.31 1024x768 48.36 60.00 1280x768 47.77 59.87 1360x768 47.71 60.01 1280x1024 63.98 60.02 1600x1200 75.00 60.00 1920x1080 RGB-PC 66.58 59.93 1920x1080 HDMI-PC 67.50 60.00 Except 26/32LT670H-UA HDMI (DTV) supported mode Resolution Horizontal Vertical Frequency (KHz) Frequency (Hz) 31.47 31.50 59.94 60.00 1280x720p 44.96 45.00 59.94 60.00 1920x1080i 33.72 33.75 59.94 60.00 1920x1080p 26.97 27.00 33.71 33.75 67.43 67.50 23.97 24.00 29.97 30.00 59.94 60.00 ENG ENGLISH 720x480p Instructions for how to use the TLL-1100A TVyour set and retain it for future reference. Link Loader to copy and clone a Master TV setup is provided in the operation manual supplied with TV-Link Loader Prior to cloning the Public Display Mode Setup, be sure to set up all the other TV features that should be included in the master TV setup. This includes channel adding-deleting, video and audio menu setups and other TV features that are clonable. Refer to the TV installation guide for specific details. LG Customer Information Center For inquires or comments, visit www.lg.com or call: 1-888-865-3026 1-888-542-2623 USA, Commercial User CANADA Register your product Online! www.lg.com This product qualifies for ENERGY STAR in the “factory default (Home Use)” setting. Changing the factory default settings or enabling other features may increase power consumption that could exceed the limits necessary to quality for ENERGY STAR.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project