N750 WiFi Router Model WNDR4300v2 Quick Start Guide

N750 WiFi Router Model WNDR4300v2 Quick Start Guide
Quick Start
1. Attach the router stand to
the router.
Orient the router vertically.
Insert the tabs of the stand
into the slots on the bottom of
your router.
2. Prepare and connect your
modem.
Unplug your modem’s power.
If your modem uses a battery
backup, remove the battery.
Plug in your modem. If your
modem uses a battery backup,
put the battery back in. Then
cable the modem to the
router’s yellow Internet port.
N750 WiFi Router
Model WNDR4300v2
Internet
Package Contents
3. Power on the router.
to
Wait for the Power LED
light solid green. If the Power
LED does not light, press the
Power On/Off button.
Wait for the 2.4 GHz LED
to light solid green.
4. Connect a device.
Use an Ethernet cable to
connect your computer to a
LAN port on the router.
You can also use WiFi to
connect your WiFi device to
the router. To connect with
WiFi, use the WiFi network
name and password on the
product label.
DSL or cable
Ethernet cable
Ethernet cable
(not included)
Modem
Router
Router stand
Power On/Off button
5. Log in to the router.
Launch a web browser.
NETGEAR genie displays.
Ethernet cable
Power adapter
(varies by region)
If you do not see genie, enter
www.routerlogin.net in the address field of the
web browser. When prompted, enter admin for
the user name and password for the password.
Follow the genie steps to connect to the Internet.
Power adapter
Router
6. Get the genie app.
Download the free genie app from
www.NETGEAR.com/genie.
Easily share media, files, and printers on the
network from your smartphone, tablet, or
laptop.
WiFi Network Name and Password
Join the WiFi Network
Support
The preset WiFi network name (SSID) and password (network key) are
unique to your router, like a serial number. Because the router automatically
uses WiFi security, you don’t need to set it up. The WiFi settings are on the
product label.
To connect your computer or WiFi device (such as a smartphone or gaming
device) to your router’s WiFi network, you can use either the manual
method or the Wi-Fi Protected Setup (WPS) method.
Thank you for purchasing this NETGEAR product.
Manual Method
1. Open the software utility that manages your WiFi connections on the
computer or WiFi device that you want to connect to your router.
This utility scans for all wireless networks in your area.
NETGEAR recommends that you use the preset WiFi settings because you
can check the label if you forget them. NETGEAR genie lets you change
these settings. If you do so, write down the new WiFi settings and store
them in a safe place.
Find the preset WiFi settings on your router and record them here:
WiFi network name (SSID)
Network key (password)
If you change the WiFi settings, write the new settings here for easy
reference and store this booklet in a safe place.
WiFi network name (SSID)
Network key (password)
October 2014
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
After installing your device, locate the serial number on the label of your
product and use it to register your product at https://my.netgear.com.
You must register your product before you can use NETGEAR telephone
support. NETGEAR recommends registering your product through the NETGEAR
website. For product updates and web support, visit
http://support.netgear.com.
2. Find and select your router’s WiFi network name (SSID).
The SSID is on the product label.
NETGEAR recommends that you use only the official NETGEAR support
resources.
3. Enter the router’s password (or your custom password if you changed
it) and click the Connect button.
The password is on the product label.
You can get the user manual online at http://downloadcenter.netgear.com or
through a link in the product’s user interface.
4. Repeat Step 1 through Step 3 to add other computers or WiFi devices.
WPS Method
If your computer or WiFi device supports WPS, you can use WPS to join
the modem router’s WiFi network. For help with the WPS button on your
computer or WiFi device, check the instructions or online help that came
with that computer or WiFi device. Some older equipment cannot use WPS.
For the current EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visit
http://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
Note:  WPS does not support WEP security. If you are using WEP security,
use the manual method.
on the router.
1. Press the WPS button
2. Within two minutes, on your computer or WiFi device, press its WPS
button or click its onscreen WPS button.
The computer or WiFi device connects to your router’s WiFi network.
3. Repeat this process to add other computers or WiFi devices to the
network.
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered
trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries.
Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising