How to use the AM / FM radio
How to operate the tuner
How to use the AM / FM radio
SOURCE MENU switch
AUTO.P
Switch
Preset
Switches
MENU Button
TUNE TRACK
Button
Listening to the AM/FM radio
 Press MENU .
 Touch SOURCE .
 Touch AM to receive AM radio, or
FM to receive FM radio.
When an HD Radio tuner is connected, the standard radio (analog radio) is also
controlled through the HD Radio tuner. Note that this means the antenna should
be connected to the HD Radio tuner.
50
Selecting radio stations
Manual selection
or
.
• Each pressing of the switch moves the frequency one step up or down. (One step on
the AM band is 10kHz. One step on the FM band is 0.2MHz.)
: Raises frequency
RADIO
 Press
: Lowers frequency
Automatic selection
 Press and hold
or
until a beep is heard.
• The station that is closest in frequency to the frequency that is currently displayed on
the screen will be searched for automatically, and searching will stop when the station
is received. To stop the search before a station is found, press the button again.
Selection using preset switches
 Touch the preset switch that already has a station recorded.
• Refer to "Saving radio stations" on page 53 for details on saving stations.
If the reception for a particular station is weak in the area you are in, automatic
selection may not work.
51
How to operate the tuner
How to use the AM / FM radio
Selecting radio bands
 Touch FUNC .
 Touch BAND .
• Each time the switch is touched, the
radio band will be changed in the
order shown below.
FM1
52
FM2
OFF
FM3
Saving radio stations
There are two modes for saving radio stations, manual and AUTO.P, and these modes
operate independently.
Confirm that "AUTO.P" is not displayed in the upper part of the screen.
• If "AUTO.P" is displayed, touching AUTO.P will switch the screen to manual.
RADIO
Saving manually
 Use manual tuning or automatic tuning to select the station to be saved.
 Choose a preset switch and touch it until a beep is heard.
• The radio station (frequency) is set. Touching the preset switch will now tune in the
selected station.
Saving with AUTO.P
 Touch FUNC .
 Touch AUTO.P until a beep is heard.
• The AUTO.P function will be activated and start automatically selecting stations. A
beep will be heard when automatic selection of stations is completed. On touching
AUTO.P again, the display will switch to the previously recorded station.
Changing stations saved by AUTO.P
 Use manual tuning or automatic tuning to select the station to be saved.
 Choose a preset switch and touch it until a beep is heard.
53
How to operate the tuner
How to use the AM / FM radio
About AUTO.P
Because AUTO.P temporarily saves stations for the preset switches, stations saved
manually will remain in memory even if AUTO.P is used. By manually saving
stations that are used regularly, these manually saved stations can be restored even
after AUTO.P has been used, such as after traveling.
Touching AUTO.P while AUTO.P is being used or after AUTO.P has been used
will return the preset memories back to the condition they had before AUTO.P was
used. (Doing so will delete the stations saved with AUTO.P.) The flow for switching
from AUTO.P to manual is shown below.
If the BAND is switched to another BAND, the saved station with AUTO.P is cleared.
Touch AUTO.P
beep is heard.
Automatically saves
stations to preset switches
until a
Manual
Touch AUTO.P
(Stations saved by AUTO.P are
deleted)
AUTO.P
(starts search)
AUTO.P
(stops search)
• AUTO.P may not automatically receive stations if radio waves in the surrounding
area are weak.
• A station saved by the tuning switch may not match a station saved by AUTO.P
even though the signal is received from the same station.
• Due to conditions for receiving radio waves, saved stations may differ even
when the AUTO.P switch is operated repeatedly in the same location.
• Up to six stations having good reception sensitivity are automatically saved in
order starting from the lowest frequency.
• When less than six stations capable of reception are found, nothing is saved for
the remaining preset switches.
• In the FM mode, when the BAND is switched to another BAND, the AUTO.P is
canceled temporarily.
54
Turning off the radio
• Touching AUDIO OFF again on the
MAIN MENU screen will turn on the
radio and resume reception of the
radio station (frequency) received
before power was turned off.
RADIO
 Press MENU .
 Touch AUDIO OFF .
55
How to operate the tuner
How to use HD Radio
When an optional HD Radio tuner is connected, HD Radio broadcasts can be received.
Title
Switch
SOURCE MENU switch
AUTO.P
Switch
MODE
Switch
Preset
Switches
MENU
Button
TUNE TRACK
Button
Listening to HD Radio
Depending on the reception status, HD Radio can also receive analog broadcasts, which
means reception is still possible in regions with no digital coverage.
 Press MENU .
 Touch SOURCE .
 Touch AM to receive AM radio, or
FM to receive FM radio.
• When an HD Radio tuner is connected and a digital broadcasting program is
received, "DIGITAL" is displayed.
• When an HD Radio tuner is connected, the
available.
TITLE touch switch becomes
• With the MODE switch, you can switch between analog and digital
broadcasting.
• The HD Radio Ready logo is a proprietary trademark of iBiquity Digital Corp.
56
Selecting radio stations
Manual selection
or
.
• Each pressing of the switch moves the frequency one step up or down. (One step on
the AM band is 10kHz. One step on the FM band is 0.2MHz.
: Raises frequency
RADIO
 Press
: Lowers frequency
Automatic selection
 Press and hold
or
until a beep is heard.
• The station that is closest in frequency to the frequency that is currently displayed on
the screen will be searched for automatically, and searching will stop when the station
is received. To stop the search before a station is found, press the button again.
Selection using preset switches
 Touch the preset switch that already has a station recorded.
• Refer to "Saving radio stations" on page 58 for details on saving stations.
If the reception for a particular station is weak in the area you are in, automatic
selection may not work.
57
How to operate the tuner
How to use HD Radio
Saving radio stations
There are two modes for saving radio stations, manual and AUTO.P, and these modes
operate independently.
Saving manually
Refer to "How to use the AM / FM radio" on page 53.
Saving with AUTO.P
 Touch
 Touch
FUNC .
AUTO.P until a beep is heard.
• The AUTO.P function will be activated and start automatically selecting stations. A
beep will be heard when automatic selection of stations is completed.
• When a radio station found by AUTO.P function is stored into the preset switch, the
station already stored in the preset switch will be overwritten.
Changing stations saved by AUTO.P
Refer to "How to use the AM / FM radio" on page 53.
Displaying information about the current broadcast
When receiving an HD Radio broadcast, information about the current broadcast, such as
the name of the radio station, the album, the title of the track, the artist, and the musical
genre, can be displayed if that station is broadcasting those information.
 Touch
 Touch
FUNC .
TITLE .
• Touch TITLE OFF to return to the
operation screen.
58
Turning off the radio
• Touching AUDIO OFF again on the
MAIN MENU screen will turn on the
radio and resume reception of the
radio station (frequency) received
before power was turned off.
RADIO
 Press MENU .
 Touch AUDIO OFF .
59
How to operate the tuner
How to use the SIRIUS satellite radio
When an optional SIRIUS satellite radio tuner is connected, SIRIUS satellite radio
broadcasts can be received.
SOURCE MENU switch
DIRECT
Switch
CATEGORY
Switch
TITLE
Switch
BAND
Switch
Preset
Switches
MENU
Button
TUNE TRACK
Button
Listening to SIRIUS satellite radio
With SIRIUS satellite radio, over 100 channels are available including music, news, and
entertainment programs.
You can select the channel you want from various categories such as POP and ROCK, or you
can select a channel by direct input.
Reception of SIRIUS satellite radio is a paid subscription.
 Press MENU .
 Touch SOURCE .
 Touch SIRIUS .
Check the SIRIUS ID
The SIRIUS ID number is a 12-digit numerical code that is assigned each time the SIRIUS
satellite radio tuner is connected.
 Touch
SIRIUS ID on the
INFORMATION screen.
• A 12-digit numerical code is displayed.
60
Changing the SIRIUS band
FUNC .
BAND .
• The BAND changes.
[SIRIUS 1] → [SIRIUS 2] → [SIRIUS 3] → [SIRIUS 4] ... → return to [SIRIUS 1]
RADIO
 Touch
 Touch
Selecting the channel you want to listen to
Selecting from the available categories
 Touch FUNC .
 Touch CATEGORY .
 Select the category that you want.
• Touch
or
to switch categories.
If the selected category is unobtainable, the blank category button appears.
Selecting a channel by direct input
 Touch FUNC .
 Touch DIRECT .
 Input a channel.
 Touch ENTER .
61
How to operate the tuner
How to use the SIRIUS satellite radio
Displaying information about the current broadcast
During SIRIUS broadcasts, information including the channel name, the album name, the
title, and the artist can be displayed for the current track.
 Touch
 Touch
FUNC .
TITLE .
• Touch TITLE OFF to return to the
operation screen.
Turning off the SIRIUS
 Press MENU .
 Touch AUDIO OFF .
62
63
RADIO
How to operate the tuner
How to use the XM satellite radio
When an optional XM satellite radio tuner is connected, XM satellite radio broadcasts
can be received.
SOURCE MENU switch
DIRECT
Switch
CATEGORY
Switch
TITLE
Switch
BAND
Switch
Preset
Switches
MENU
Button
TUNE TRACK
Button
Listening to XM satellite radio
With XM satellite radio, over 100 channels are available including music, news, and
entertainment programs.
You can select the channel you want from various categories such as DANCE and ROCK, or
you can select a channel by direct input.
Reception of XM satellite radio is a paid subscription.
 Press MENU .
 Touch SOURCE .
 Touch XM .
Check the XM ID
The XM ID number is a 8-digit numerical code that is assigned each time the XM satellite
radio tuner is connected.
 Touch
XM ID on the
INFORMATION screen.
• A 8-digit numerical code is displayed.
64
Changing the XM band
FUNC .
BAND .
• The BAND changes.
[XM 1] → [XM 2] → [XM 3] → [XM 4] ... → return to [XM 1]
RADIO
 Touch
 Touch
Selecting the channel you want to listen to
Selecting from the available categories
 Touch FUNC .
 Touch CATEGORY .
 Select the category that you want.
• Touch
or
to switch categories.
If the selected category is unobtainable, the blank category button appears.
Selecting a channel by direct input
 Touch FUNC .
 Touch DIRECT .
 Input a channel.
 Touch ENTER .
65
How to operate the tuner
How to use the XM satellite radio
Displaying information about the current broadcast
During XM broadcasts, information including the channel name, the title, and the artist can
be displayed for the current track.
 Touch
 Touch
FUNC .
TITLE .
• Touch TITLE OFF to return to the
operation screen.
Turning off the XM
 Press MENU .
 Touch AUDIO OFF .
66
67
RADIO
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising