BV9968BI
Full iPod Control
AND SD MEMORY CARD PORT
AND FRONT PANEL AUX INPUT
12
BV9968BI
Full iPod Control
AND SD MEMORY CARD PORT
AND FRONT PANEL AUX INPUT
INSTRUCTIONS
CONTENTS
Panel Introduction
Basic Functions
Remote Control Function
Turn the Unit On/Off
Enter into the Main Interface
Play SD card/USB memory device
Radio Function Operation
Disc Function Operation
Play/Eject Disc
DVD/VCD Disc Playback
CD Disc Playback
MP3/WMA Format Disc Playback
Touch Menu Function
Bluetooth Function Operation iPod function operation
External input operation
Other Function Operations
Rear view function
General setting
Time setting
Language Setup
Video Setup
Audio setting
Steering Wheel Setup
Touch calibration
Wiring Diagram
Trouble shooting
Specifications
Accessory
DVD Parental control function
01
12
13
13
13
12
12
12
13
14
14
14
16
16
17
18
18
09
09
09
09
09
11
02
03
05
07
07
07
08
09
ACCESSORY
Accessory
Wire
USB Cable
Keys
Remote controller
Warranty card
DVD Parental control function
DVD Parental control function
DVD Parental control function：The default set for DVD is #8 adult, which means all grades of
DVD can be read without entering password.To
change the default grade,you need to follow the below procedure: Press SETUP button on the remote, display will show the system set up menu and the submenu,
select password and enter
0000, you will be able to choose the DVD grade as default.
Quantity
1PC
1PC
2PCS
1PC
2PCS
INSTRUCTIONS
18
INSTRUCTIONS
PANEL ARRANGEMENT
INSTRUCTIONS
85
This unit is with switchable frequency.
You can switch from USA frequency to Europe frequency by following the below steps:
Step1. In main menu, press setup icon to enter the setup interface.
Step2. Press the Radio icon,and insert password 123456, then press “OK”,
the menu from which you can select the radio frequency will show.
Step3. Press “Radio region” and select the desired frequency by pressing the "up"
and "down" arrow, then press it and setting is finished.
2
1
3
20 19 4 5 6 7 8 9 10 11 12 13 14 15
18
17
16
17 02
INSTRUCTIONS
BASIC FUNCTION
INSTRUCTIONS
WIRING DIAGRAM
This player is equipped with ISO standard connector, please follow below instruction:
● Red - ACC ON (+12V)
● Yellow – 12 V Constant
● Black – Ground wire
● Blue - Power Antenna / Remote Amp Turn On
● Grey/Grey black - Right front speaker (+/-)
● White/White black - Left front speaker (+/-)
● Purple/Purple black - Right rear speaker (+/-)
● Green/Green black - Left rear speaker (+/-)
● Orange – Back-Up Camera Trigger (+) ● Pink – Parking Brake (-)
Bluetooth iPod
3
4
5
6. SEEK Knob/( / )/ (SEEK+/SEEK-)/(SEEK/SEEK)(Speed forward/backward/Select station/song)
In radio mode, press/rotate the knob to select station upward/backward. Long press/rotate the knob to automatically scan station.
In playback mode, short press/rotate the knob to select song upward/backward,long press/rotate it to achieve speed forward/backward function.
7 Dual (front and rear)USB
Warning :You can only use either front or rear USB at a time.Never connect both front and rear USB at the same time! This could cause malfunctions.
8
9.MIC Input
Bluetooth MIC input.
03
TROUBLE SHOOTING
PROBLEM CAUSE
Cannot power on
Check fuse
Some factors cause MPU wrong operation
After ignition switch off ,setting information all lose
Change battery or fuse
Poor performance of radio station
Weak signal
Connot load disk There is a disk inside
Cannot play disc
Disc is scratched
Put wrong side of disc into the unit
Lens is dirty
Cannot switch language/subtitle
No image
There is only one language/ subtitle in disc
Other factors cause MPU wrong operation
Cannot watch image during driving
It’s not allowed to watch image during driving
SOLUTION
Change fuse same as the old one
Press RES button on the panel by penpoint, then, power on
Reset information and save
Move the car to another place, then research
Remove disc before inserting another one
Change new disc
Insert in the disk with sign side up
Clean lens by lens clean disc
If disc is not with multi-language/subtitle, it cannot switch language/subtitle
Press [RES] button on the panel by penpoint, then, power on
Park the car in a safe place, put the car stall in “ P ” postion, pull up the hand brake, parking brake wire must be grounded
16
INSTRUCTIONS
15
12
13
10
11
18
19
16
17
14
15
20
INSTRUCTIONS
04
INSTRUCTIONS
REMOTE CONTROL FUNCTION
28
CLASSIC
5.SEEK+ ( )/ SEEK- ( )button
In normal playback MP3, USB, SD songs, press this button to previous song or next song.
INSTRUCTIONS
Audio setting
Click icon on setup interface to access audio setting interface, as shown in right(PIC 1) diagram:
You can turn on or turn off the existing functions on audio setting interface.
PIC 1
Steering wheel setting
I. Click icon on setup interface so as to access steering wheel setting interface.
II.Connect anode and cathode of direction control wire of the car with anode and cathode of
direction control wire of this device, and press the buttons on steering wheel one by one
and record the corresponding sequence and functions.
III. Click the button of steering wheel needs to be allotted so as to select the corresponding
setting function, such as volume +.
IIII. Buttons on steering wheel shall display the corresponding functions, such as volume + .
To modify function settings, repeat procedures 3~4.
To reset functions, click [Reset] icon, all the settings set before shall be cleared, repeat procedures 3~4 for resetting.
Touch calibration
If touch calibration error occurs, you can adjust the touch coordinate by “Touch calibration”.
Click icon on setup interface, input password [888888] to confirm to access touch calibration interface, as shown in below diagram:
Touching methods
Use touch pen to click the center of “+” icon, and move along with center of “+” icon so as to calibrate the screen. It shall automatically save data and exit after screen calibration.
Please accurately click all positions on screen, or the accuracy of touch calibration shall be affected.
28
DSP
05 14
INSTRUCTIONS
Access setup interface
Click [Setup] icon on main interface to access setup interface.
General setting
Click icon on setup interface to access general setting interface, as shown in below
PIC 1 diagram:
In general setting interface, you can select to turn on or turn off the existing functions.
You can set wallpaper and opening picture you like and check version number of DV/DC, click icon to browse up/down.
Wallpaper selection
Click icon on wallpaper bar , direction icon shall pop up, click it to select wallpaper.
Opening picture
Click icon on opening picture bar , direction icon shall pop up, click it to select opening picture.
Time setting
Click icon on setup interface to access time setting interface, as shown in below
PIC 2diagram:
Click icon on time bar time setting interface shall display, as shown in below PIC 3 diagram:
Click icon beside hour and minute to separately set hour and minute.
PIC 1 PIC 2 PIC 3
Language Setup
During use, you can select your familiar language to display menu by language setup.
Click icon on setup interface to access language setting interface, as shown in right
(PIC 4) diagram:
Click the corresponding icon on the language bar desired to be set so as to switch the language type, when there are more than 3 languages, direction icon shall pop up, click it to select your familiar language.
Video setting
Click icon on setup interface to access video setting interface, as shown in right
(PIC 5) diagram:
At video setting interface, you can adjust brightness, contrast, saturation and hue of the video.
21.UP, DOWN, LEFT, RIGHT, ENTER button
When playing MP3, USB, SD returns to song menu, up, down selections can be up / " " button or down / " " key to select up and down, select and press " " key to confirm.
The selected tracks can be played. Press the left or right arrow keys to " " or " " key, can be on the next page function operation.
13
PIC 4
PIC 5
06
INSTRUCTIONS
28.DSP
Press this button to show the time.
23.SPECIFICATIONS:
Power supply
Power range
Max operate current
Dimensions
Ground system
Amp Rating
FM tuner
USA frequency range
Signal/Noise ratio
Stereo separation
Search station volt
Distortion rate
AM tuner
USA frequency range
Limit noise sensitivity
DVD PLAYER
Signal/Noise ratio
Frequency response
DC 12V
10.8-16.0V DC
10A
155X182X53MM
Negative ground
80 Watts x 4 Channels
87.5-108MHz
87.5-107.9MHz
55dB
30dB
20-30dBuv
1.5
%
522-1620KHz
530-1710KHz
32dB
70dB
20Hz-20KHz
INSTRUCTIONS
Turn on/off Host
When the ignition switch is put in ACC or ON position,Press[ ] button on the front panel to turn on the unit.After the host starts, hold [ ]button for 3 seconds , the host will turn off.
Access main interface
In the other mode, click on the interface to return the icon will switch to the main interface.
Touch the function icons so as to access the corresponding function operations.
USB/SD Card function operation
When there is a USB device/SD card connected, the unit can conduct the playback of audio/video/ image files in the USB device/SD card.
Insert/Eject USB storage device
1. Connect a USB recorded with media information to the unit by a USB connecting cable.
2. When there is a need to eject the USB device, exit the USB device playback screen first, and then take out the device.
Insert/eject SD card
1. Insert a SD card recorded with media information into the SD card slot in the unit correctly until it is locked.
2. When pulling out the SD card, exit SD card playing state first, then press the SD card and it shall pop up after unlocking.
Enter/exit
Insert a USB storage device or SD card to automatically play data contained in it. If the unit has connected with a USB device or SD card, touch[ USB ]icon in the main interface to enter into the external storage playback interface; Touch[ SD ]icon to enter into the SD card playback interface. During playback, touch the top center area of the screen to pop up the touch menu, operate touch menu to perform various playback controls.
Play
After SD card/USB removable device being read out, the operation methods are similar to disk operation methods.
INSTRUCTIONS iPod function operation
Connect to iPod first, touch [iPod] icon on main interface to access iPod interface, as shown in below diagram.
Play/Pause Fast forward play/Fast backward play Volume adjustment knob
Stop Previous Song/next Song
Back to the main interface
External input operation
Connect the video input plug with external video input jack, and connect the audio input plug with external audio input jack.
Touch [Input] icon on main interface to access external input interface.
Audio You can adjust the volume, bass, pitch for input audio.
You can adjust the speaker volume by adjusting the front and back,left and right column.
Video You can adjust the brightness, contrast, saturation and hue for input video.
You can also choose the video standard mode.
NO VIDEO SIGNAL
Other functions
Rearview function
In any running state, the video signal can switch to reverse video state when reversing the car, and the system shall return to its initial running state after reversing the car.
Warning
Do not rely on CCD system completely, please make sure you use direct eyesight while driving.Back rearview system only assists in driving. As the distance range of rearview system is limited, completely relying on the rearview system during driving may cause accidents.
07
Reverse field simulation
12
Rearview backup image
INSTRUCTIONS
Bluetooth Function Operation
Enter/exit
Touch [ Bluetooth ] icon in the main interface to enter the bluetooth interface.
Touch icon to exit bluetooth interface.
Pair/link
To use Bluetooth hand-free function, make connection first, i.e. match the host with the
Bluetooth mobile phone.
Operation methods:
Set the host to be matching state, and open the Bluetooth of your mobile phone and use the mobile phone to search device, the mobile phone shall prompt to match password with the Bluetooth when it has searched the Bluetooth device.
Input Bluetooth password (0000) to the mobile phone and confirm. The mobile phone shall prompt whether authorize to this device,please select [Yes]. Phone and Bluetooth shall automatically connect within 20 seconds. Under any working mode, the host shall convert to Bluetooth state if there is an incoming call. And the host shall restore to current mode after hanging up.
When the Bluetooth device matches with this device, the connection status shall display
“Connected”, otherwise, it shall display “No connection”.
Dialing
You can dial on mobile phone directly or input phone number through the number buttons on the screen, click to delete if there is input error.
After input the phone number, click to make a call, and click to hang up the phone.
Click during a call so as to switch the voice between car speaker and mobile phone.
Call records
Click to access call records interface as below PIC 2:
Received calls: Touch this button to check all the phone numbers of received calls.
Dialed numbers: Touch this button to check all the dialed phone numbers.
Missed calls: Touch this button to check all the phone numbers of missed calls.
Bluetooth volume
Click to access Bluetooth volume interface as below PIC 3:
INSTRUCTIONS
Radio Function Operation
Enter/exit
Touch [ RADIO ] icon in the main interface to enter into the radio interface.
Touch icon to return to main interface, and then touch other function icons so as to exit radio mode.
Band selection
Click [BND] icon so as to switch among FM1,FM2, FM3, AM1, AM2 bands.
Search/Save radio stations
Short press [Scan] icon to browse the stored radio stations.
FM band can save 18 radio stations (Six stations for FM1/FM2/FM3), AM band can save
12 radio stations (Six stations for AM1/AM2).
Scan radio
Short press icon to manually fine-tune radio stations upward/downward.
Long press icon to automatically search and save radio stations.
Sound setting
Click [EQ] icon can switch to different sound mode.
Mute on/off
Click [Mute] icon to turn on/off mute function
TFT on/off
Click icon to turn off TFT, and then click the screen area so as to turn on TFT.
Click icon so as to slide screen angle.
PIC 1 PIC 2 previous song
PIC 3
PLAY/PAUSE next song
11 08
INSTRUCTIONS
Disc Function Operation
Play/eject disc
Play disc
Insert the disc into the disc slot with the printing surface up, system will detect the disc and automatically take it in to read and play.
Eject disc
(1) Click button on the panel to eject the disc.
(2) If a disc has not been took away 15 seconds after it is ejected, system will automatically take in the disc but not play.
Do not insert two discs or more.
DVD/VCD disc playback
During playback of disc, touch the middle lower area of the screen to pop up the touch menu, operate the touch menu to perform various playback controls.(PIC 1)
CD Disc Playback
After a CD is inserted, system shall access disc reading state immediately.
When there is a disc in the device, click [Disc] at the main interface so as to access disc reading state.
After the disc being read out, system shall automatically play in sequence.
MP3/JPEG/MPEG4 disk playing
When the disc contains readable files, such as MP3/JPEG/MPEG4 files, it shall be automatically read out and played after slipping into DVD player.
During playing, touch the screen area and the touch menu shall pop up. Operate the touch menu for various playing.
Touch Menu Function Description
Play/pause
Touch the button to pause, retouch it to continue to play.
Stop
Touch the button to enter into prestop status.
Fast forward/backward
Consecutively touch this button to select the speed of fast-forward/fast-backward.
The previous/next song
Touch the button to select the previous/next song.
Volume adjustment button
Touch this button and volume adjustment modulation shall pop up, touch button to adjust the volume.
TT 1/5 CH 1/1 x
TT 1/5 CH 1/1 x
00 00
00:01:44
VOL
00:09:43 00:01:44
VOL
00:09:43
PIC 1
09
INSTRUCTIONS
Access next menu
Touch it to access the next menu interface.
Time setting
Touch this button to access time setting interface.
Stereo on/off
Touch it so as to turn on/off stereo.
Return to root menu
Touch this icon, it shall return to root menu of disk in DVD state and access PBC menu playing in VCD state. All chapters in the disk shall be displayed on the interface, touch the chapter icon directly for playing.
Access title menu
Press this button to return to title menu of the disk. Directly click menu bar at title menu interface for playing.
Repeat play
In playing state, touch this button to start repeat play function: Chapter repeat
Title repeat repeat all Off.
During VCD playing, this function only works when PBC is off.
Language selection
Touch this button to select language.
Digit keyboard
Touch this button and digit keyboard shall appear, click number buttons directly to select tracks for playing.
Randomly play
Touch this button to instantly play each song. Press again to back to the normal play.
Zoom in/Zoom out image
Touch this button to zoom in /zoom out the image.
10
